Database Develop

Suggestions for screen protector

Decided I shouldn't go without a screen protector, looks like the tempered glass ones won't work well because the screen in curved on the edges. Anyone have experience with or can recommend a good one? I often see suggestions on here that I couldn't find on my own and I'm thinking one of you guys can help.
By the way i went with this case:
https://www.amazon.com/gp/product/B01M15T2I3/ref=oh_aui_detailpage_o02_s01?ie=UTF8&th=1
I like it except that the camera and volume buttons aren't cut outs. It fits the phone well.
I appreciate any suggestions.

Same boat as you. The ones offered Amazon all seem to complain about them being too thin, bezel to bezel.

The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi

Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
Would you mind posting some pictures of your screen protector? I'd love to see it.

hikihibiki said:
Would you mind posting some pictures of your screen protector? I'd love to see it.
Click to expand...
Click to collapse
Not a very good pic. Just used an old phone I had laying around buy hopefully it gives you some idea of how it sits.
http://www.dumpt.com/img/viewer.php?file=mcavzh8s6o1d51d9c95j.jpg

Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/

olegfusion said:
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
Click to expand...
Click to collapse
Nillkin has crappy cases for F5321 that offer little more than scratch protection, and you're incessant advertising for them across the all the device boards is obvious, so you can hardly be considered objective. Please go troll your mother and go away. There are people here looking for serious solutions.

Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
I decided to go with the Skinomi as well, put it on my XC yesterday. Very happy with the results, it's been a while since I have used a non-tempered glass screen protector and for some reason I was expecting the touch screen to be hard to use and the experience generally unpleasant. This wasn't the case and it fits perfectly. recommended.

Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too

tlxxxsracer said:
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
Click to expand...
Click to collapse
I saw those but have seen to many negative things about G Color protectors to ever try one out myself. Lots of videos on youtube about them being crap.

I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app

I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics

enjoimadcow said:
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
Click to expand...
Click to collapse
Lol, I am positive I saw your review on Amazon when I left mine (we also have the same case). Anyhow, although I disagree with the installation, I agree with everything else. Installation for me was slightly confusing, but really easy once I understood what to do. Air bubbles were a pain to get out, but that's to be expected. As for the quality, it's perfectly fine except for your two points. Mostly your second point: the pixel cutoff. While definitely bearable and not very noticeable most of the time, in certain apps it really is irritatingly noticeable. I would have to recommend against getting this screen protector and waiting until a better one comes out. I'm keeping it on until I find a really good case and/or a better glass screen protector.

Has anyone tried the Nillkin "Amazing H tempered glass screen protector"? Would really like to know if it's any good because I enjoy their frosted case.

Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
BTW, their case for this phone is really thick. Not as stylish as their early, asymmetrical cases :/

asmad said:
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
Click to expand...
Click to collapse
This is not great, but is the best I've found so far. It's not got perfect adhesion on the edges, but I've tried the super soft screen protector, flat glass and curved glass with glue only on the edges so dirt gets under it. I'd love to find a curved glass one that has glue all over it instead of just a tiny but around the edges.

I'm also looking for a curved screen protector that "glues" properly (direct contact) to the entire screen, not just the edges.
It doesn't have to be tempered glass either, simple cheap TPU would work fine.
The ebay one mentioned above doesn't ship outside of UK, so it's no good for me.

jayarmstrong said:
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
Click to expand...
Click to collapse
I have a problem with that screen protector, it turns proximity sensor always on, so you can't access the phone in call.
When I removed the devilcase curved glass screen protector, the proximity sensor starts to work again.
Seems that roxfit screen protector has similar issue.
https://talk.sonymobile.com/t5/Xper...-on-gt-black-screen-during-phone/td-p/1203936

Ringke Invisible Defender

Has anyone tried this screen protector yet, looks like it will be very case friendly as it wraps all the way to the back, If anyone here has tried it how is the screen clarity ?

EarlZ said:
Has anyone tried this screen protector yet, looks like it will be very case friendly as it wraps all the way to the back, If anyone here has tried it how is the screen clarity ?
Click to expand...
Click to collapse
I do have it installed.
Not a bad screen protector, applying it was not hard. It wraps around the back, but I get straight line bubbles on the edge, which is not awful. Works with the cases, but sometimes cases push the bubbles in and you'd have to keep pushing them out. Overall, 5/10.
Screen sensitivity is okay, seems a little dry and there is a friction with the spen.

I'm using the same. It'll do for now. I may try the Armorsuit one next as it worked well on my N7. I rate it as a 6/10. Same issues as stated above.

This screen protector is waste of money. It's easy to apply but there will be a lot of bubbles and is sticky as well.

matteosaeed said:
I do have it installed.
Not a bad screen protector, applying it was not hard.
Screen sensitivity is okay, seems a little dry and there is a friction with the spen.
Click to expand...
Click to collapse
daviddem said:
This screen protector is waste of money. It's easy to apply but there will be a lot of bubbles and is sticky as well.
Click to expand...
Click to collapse
Do you also see the two rainbow effect lines on the left and right sides of the screen? Annoying to say the least.
4/10 for me

daviddem said:
This screen protector is waste of money. It's easy to apply but there will be a lot of bubbles and is sticky as well.
Click to expand...
Click to collapse
Kawaisa said:
Do you also see the two rainbow effect lines on the left and right sides of the screen? Annoying to say the least.
4/10 for me
Click to expand...
Click to collapse
Here is my installation, fairly clean. No complaints but that might change

I hate this protector more than ever. It's so rubbery that my nail drags along every time I swipe or scroll. It's worse than the wet applications I've used in the past.

this is a pos product. Yes it does go on clear and wraps around but the plastic they used is so sticky that you cannot scroll and drag your fingers much less an spen. This must be the worse product ever!!!

matteosaeed said:
Here is my installation, fairly clean. No complaints but that might change
Click to expand...
Click to collapse
Does this one have any holes or cutouts for the sensors? I can't see in the photos.
EDIT: NVM, I looked it up on Amazon, I don't like those cutouts. I'm gonna order it along with the protector for the Galaxy Tab 3 and use the Rinke one as a template to cut out of the other one. I've had a Tab 3 7.0 from IQ Shield conver on my Note 7 for a year and like it. Took a couple of tries to get the holes just right. Trying to get a good tempered glass solution is a headache, this option will keep me from going crazy till someone gets it right!

http://apps.samsung.com/earth/gear/appDetail.as?COUNTRY_CODE=FRA&&appId=slide.watchFrenzy http://apps.samsung.com/earth/gear/appDetail.as?COUNTRY_CODE=FRA&&appId=slide.watchFrenzy
Inviato dal mio SM-G955F utilizzando Tapatalk

matteosaeed said:
Here is my installation, fairly clean. No complaints but that might change
Click to expand...
Click to collapse
I bought one of these with a couple of Ringke cases but my note has not arrived yet...
Yours looks pretty clean, Can you come and apply mine for me? haha
How is it for smoothness? a lot of people here complaining about it being "sticky" i thought all protectors were like this for a few days... Has it gotten any better over time?

Mr.Ash.Man said:
I bought one of these with a couple of Ringke cases but my note has not arrived yet...
Yours looks pretty clean, Can you come and apply mine for me? haha
How is it for smoothness? a lot of people here complaining about it being "sticky" i thought all protectors were like this for a few days... Has it gotten any better over time?
Click to expand...
Click to collapse
Yep, it was sticky but it smoothed out. I used alcohol on it and it helped clean the sticky surface. For me, it's great with the s pen. The annyoung thing so far is sometimes bubbles get pushed when I put the case and force it. Otherwise, no problem.
Here are some tips,
I did he steamy bathroom thing when applying. Make sure you have a clean surface.
I held a flash light between under my chin so I can see dust.
Have more alcohol pads on you just in case.
Air pressure can to remove dust or stickers, but the air can is better.
Check out the video ringke.com/go/guide

For those of you having problems... did you let the screen protector stay without a case for a few days as per the instructions? If not, that's why you're getting bubbles and lifting on the edges.

Hey guys a little update. I ended up removing the screen protector and I installed the Spigen wet install.
The reasons I removed it are:
It kept getting sticky. After I cleaned it with a alcohol cloth, it gets sticky within a few hours or a day sometimes.
After a clean installation, and being out of the case for a while, any case you put in, no matter what will get the edges pushed, which leads to some air gaps, then it creates bubbles.
Pushing our bubbles with such a sticky screen will damage and stretch the screen. I will upload a picture later of what had happened.
Overall, do not recommend for long term, for short term, it is alright.
I am trying he Spigen wet one, and it seems smoother, but the clarity is not as good as the Rinkge one, but still more than enough for me. Most cases for the note 8 really suck and will push most screen protectors up unless it is a case friendly screen protector.
Happy hunting.

This is my best screen protector for curve screens e.g S7,S8.
You need to have a very clean screen no dust and you be fine. Case friendly.

matteosaeed said:
Hey guys a little update. I ended up removing the screen protector and I installed the Spigen wet install.
The reasons I removed it are:
Click to expand...
Click to collapse
Try IQ Shield, I have it ordered. Better than Spigen from my experience with the S8+ versions.

Kawaisa said:
Try IQ Shield, I have it ordered. Better than Spigen from my experience with the S8+ versions.
Click to expand...
Click to collapse
True I have iq shield isntalled and it was great on my s8. Also the skinomi one is fantabulous.

Recommended screen protector?

I just received an IQ Shield Matte screen protector and I'm really disappointed. It screws up the colors and whites have a rainbow effect to them. I took it off and now I'm looking for a new one. I'd like one that is:
1. Anti-glare
2. Anti-fingerprint
3. Clear and doesn't screw with this beautiful display.
Any recommendations?
Thanks in advance!

Thee one and only,,,,but more importantly expensive whitestone dome screen protector is probably the most I've heard of working...45 to 50 dollars tho

Any you can recommend about $20 and under?

First I tried the Spigen NeoFlex film screen protectors and they are garbage. Then I ordered a cheapo full cover tempered glass screen protector from eBay and it works great.
http://www.ebay.com/itm/3D-Full-Cov...ector-For-Samsung-Galaxy-Note-8-/332345555824
I've only been using it for about a week so I can't say how well it will keep dust out. Sensitivity is great, I don't notice it's on at all. It's not Anti-glare or Anti-fingerprint but it's only $8.

I'm using the i-blason tempered glass.
Under $20, it's still on, doesn't interfere with the screen.
It's still going to collect fingerprints and smudges due to the oils in our skin, but it wipes off easily.

jellyhead said:
First I tried the Spigen NeoFlex film screen protectors and they are garbage. Then I ordered a cheapo full cover tempered glass screen protector from eBay and it works great.
http://www.ebay.com/itm/3D-Full-Cov...ector-For-Samsung-Galaxy-Note-8-/332345555824
I've only been using it for about a week so I can't say how well it will keep dust out. Sensitivity is great, I don't notice it's on at all. It's not Anti-glare or Anti-fingerprint but it's only $8.
Click to expand...
Click to collapse
thats becuz the neoflex is a rubber 3m film, not plasti-glass. i honestly like Spigen Neoflex screen protector. only downfall is using the pen on it leaves lines where youve drawn .. but cant be felt by your touch
Sent from my SM-N950U using XDA-Developers Legacy app

mlock420 said:
Thee one and only,,,,but more importantly expensive whitestone dome screen protector is probably the most I've heard of working...45 to 50 dollars tho
Click to expand...
Click to collapse
I've never seen this warning before on anything from Amazon.

roaduardo said:
I've never seen this warning before on anything from Amazon.
Click to expand...
Click to collapse
Somebody got a knock off, I read. The screen protector he got was plastic instead of glass.
Sent from my SM-N950U using XDA-Developers Legacy app

roaduardo said:
I've never seen this warning before on anything from Amazon.
Click to expand...
Click to collapse
Oh wow that sucks but for some reason YouTubers recommend this for s8 and note 8 idk man it looks promising but yeah that warning I've never seen before

There are plenty of discussions under the accessories section
But I'd say don't bother. I had one tempered glass protector on for an hour before it annoyed me too much and I removed it! Destroys the feel and use of the phone.

I have been buying the RhinoShield stuff for my stuff and its held up really well for me.
rhinoshield.io is where you'll find it.. (I havn't logged in long enough that I forgot my account info :/ )
edit: found my login info so now I can add the link:
https://rhinoshield.io/collections/samsung-galaxy-note-8
Plus, nobody else's stuff has any evidence that even suggests it actually works.
I havn't tried it for the note8 but I came by this thread while I was researching if anyone had so figure I'd mention it. It is expensive to get the whole kit (screen protector, bumper, and in this case rear glass protector), but I found it worth it..

I have a cheapo '2.5D' glass and its doing well. Touch response is worse mind.
There is a speaker hole at the top; this needs covering with a bit of tape or you wil get dust between the screen and the protector.

bonerp said:
There are plenty of discussions under the accessories section
But I'd say don't bother. I had one tempered glass protector on for an hour before it annoyed me too much and I removed it! Destroys the feel and use of the phone.
Click to expand...
Click to collapse

I purchased a relatively inexpensive TG protector. While it exhibits many of the drawbacks of TG protectors that aren't full-adhesive (i.e. all of them except the Whitestone Dome), it doesn't have quite the "rainbow effect" that I've seen with other protectors.
Its real downside, though, is its slickness ... I need a more paper-like surface to better control the s-pen. Just the tiniest bit of friction would help. I'm thinking that I may have to go to a film protector rather than TG to get that, though. Does anyone else have this issue with TG protectors?

eglesiaw said:
I just received an IQ Shield Matte screen protector and I'm really disappointed. It screws up the colors and whites have a rainbow effect to them. I took it off and now I'm looking for a new one. I'd like one that is:
1. Anti-glare
2. Anti-fingerprint
3. Clear and doesn't screw with this beautiful display.
Any recommendations?
Thanks in advance!
Click to expand...
Click to collapse
Ever since the introduction of the edge curved screen (and I have owned the lot) I have never found a decent screen saver. It is a subject on every forum here on XDA and concerning all the Samsung edge models.
I have taken recommendations only to find them useless. Some use a glue, some have a dotted appearance after application some just suck period!
I used a partial screen saver once that just covered the centre of the screen but even that proved awful. Even used Samsungs own on the Note 7 and though that was not glass it also was horrible.
If any peer here does find a working screen protector PLEASE let us know.
Ryland

Whitestone is the best.

I like the Spigen NeoFlex, it's been great so far for me. Went on easily, hasn't peeled off the corners/edge (and I use the Spigen Tough Armor case) and after the 12 hours to settle on the screen it looks great and writing on it with the s-pen feels good too. My personal opinion and the only one I've tried so far on my Note 8

faded03cobra said:
Whitestone is the best.
Click to expand...
Click to collapse
Can the Whiitestone be removed once it's been glued to the Screen?

yes

I got the Bodyguardz glass protector sold to me at the AT&T store (lazy me). The guy installed it and it's ok. Glass protectors have an innate problem in that they sometimes don't transmit touches to the touchscreen itself. This one is no different but it does fit well. And it has a lifetime free replacement policy. I'll keep it to protect my screen.

OnePlus 5T Official Tempered Glass Screen Protector Review

Hi folk,
With another OnePlus product comes another OnePlus attempt at making a tempered glass screen protector which works for it. Will it be this time that is the magic attempt?
If you dont want to or can't watch the video here are my thoughts:
Yes, they seem to have finally made a tempered glass which fits perfectly on the screen without much cut off. I say much as I think there is still a tiny cut off, but it's nowhere near as noticeable as it was on the 3/3t or 5. If you want to take a look, its on the video at around the 4:04 mark.
The quality is excellent, you can barely feel or see that it's there. There are no sharp edges as the screen tapers off at the edge. It's a full glue screen protector so there is no dot matrix or rainbox effects. You do however have to be fairly careful whilst applying it and taking it off its bed as it feels like it could snap fairly easy if you rush it.
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Let me know if you have any questions.
Jono

Thanks for that, good to know as I ordered one with my 5T.
Hopefully there is a decent bunch of 3rd party ones too.

A spigen tempered glass is my all time favorite screen guard.

niijonodhg said:
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Click to expand...
Click to collapse
Thanks for this. I wanted to know how much it will cut of the screen but its much lesser than earlier.
But i need to disagree something with you. You (and many others) said it was issue etc. on OP3/3T/5 what last TGSP cutted off screen. Well it wasnt really issue or fault on Oneplus side. They needed to choose to have adhesives only on sides and no cut-off or adhesives on fully but had to cut-off. That was because of OP3/3T/5 front glass design where glass started ro bend (2.5D) earlier than usual. Thats why black borders was bigger as otherwise you would get ugly halo's and nobody likes that.
About price. Dont know where you leave but here in Finland 20€ price is nearly cheapest TGSP avaible here. Usually TGSP's here costs around 25-50€ depending of phone model so 20€ is more than just normal price for us. So okay maybe its little pricey compared ro your country but on many others it isnt.

This is my first OP device so I know nothing about past issues, but this is by far the best fitting, best sealing TGSP I have ever installed. Typically with screen protectors the edges do not want to seal/stick but the squeegee made quick work of getting all the bubbles out. There are a few pieces of inevitable lint but not one single bubble.
It does cut a tiny bit of the screen off which gives a weird depth to the screens appearance so for that I give it 9/10. If it was totally clear or just had the black at the top and bottom it would be 10/10 for sure.

Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk

DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
I'm using the original one and is perfect with the original case/Bumper.
Mine is not so perfect and the screen is slightly cover on the edge. is not a huge problem, but is noticeble if you see the phone from a side.
in any case is far better than the original plastic protector and perfect with a case.

DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.

niijonodhg said:
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
Click to expand...
Click to collapse
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk

Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.

DeathStroke said:
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Which case do you have?
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
Honestly, I haven't noticed.

niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
The one that came in the box. I want to order a 3d tempered glass and a premium case so that they can work together. Looking yet for a compatible combo.
Sent from my ONEPLUS A5010 using Tapatalk

niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
I just removed the protector to see how the screen looks naked. The "grainy-ness" is gone. I also noticed a potential problem with the protector. The adhesive doesn't go all the way to the top or bottom of the protector, so when I removed it I found a lot of dust stuck to the top and bottom bezel of the phone. This could cause scratches. Even though the scratches would not be on the display, I don't want scratches anywhere on the glass. If I keep this phone I'll try an IQshield.

With the bubbles settling behind, a lot of little dust has been captured.

I also notice grainy-ness. I'm likely going to ditch it and just go naked...

I just got my for 10€. And yes, it still crops a bit from both sides but not like OP3/3T/5. And yes, there is grainy-ness as stated above. You cant notice on black background but on white yes.

I bought the '5T full scratch protection' bundle with my phone. I have an unopened "3D Tempered Glass Screen Protector" and an opened (but unused) "Sandstone Protective Case". My plan was going to be to use the case until Spigen comes out with a 5T case, but I just decided to rock the case that came with my 5T instead.

lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
To be frank I wouldn't have noticed the grainy screen till I read your comment. But now that I've read it.... The screen protector does induce the grainy effect. It's a perfect fit imho, though it definitely does give out that grainy effect. I'm guessing I'll stop noticing it in a couple of days time.

I had an extra IQshield (wet apply) protector for a Pixel 2 XL. I cut a little off the top and it fit fine. I must say, the IQshield is very clear, no grainy screen for me.

I have to put my 2 cents in on this. The official tempered glass is pretty great. I had no issue installing, it stayed in place, zero bubble at all, and feels great. using it with the official sandstone case.

Finally, Tempered glass inexpensive full back adhesive for the Note

Someone finally did it, a Tempered glass inexpensive full back adhesive for the Note 8, not just the edges. I have to say first that I was VERY Skeptical of this tempered glasses claim to have full adhesive and stick to the phone properly. I am one of those people who has literally tried an insane amount of tempered glasses I think Amazon had to offer, finally settling on the Dome Glass but if /when it breaks you are shelling out another 45 bucks plus the install procedure can be a bit much for some.
But anyway this tempered glass went on so easy with the provided guard rail I truly couldn’t believe it. It laid down and adhered to the phone with a little help from the provided squeegee then I just pressed the edges down and voila!! The ENTIRE glass protector lays down edges and everything no bubbles. Went on just as easy as a tempered glass for a flat screen. This tempered glass is just what I have been looking for since I got my Note 8. Well done… SingularityProducts
Pros:
1. Very easy install with tools provided
2. True tempered glass
3. Fingerprints and smudges are minimal and wipe off easily
4. No dot matrix
5. Touch screen sensitivity stayed not hampered
6. Was $13.89 when I bought mine, but now I see it is $18.89 still better than $45, $34, etc the others with this claim cost
Cons:
1. I truly could not think of one con, very happy with this product I am buying another right now in case this one breaks
2. Price increase from $13.89 to $18.89
https://www.amazon.com/gp/product/B077GSJ55T/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Pics or I don't believe it
Sent from my Pixel 2 XL using Tapatalk

I think I got something similar to this. Php 1,300 so around $25.
It isnt full coverage (It cuts the screen and leaves the curve where it drops off exposed) and this first one I got had a flaw in the adhesive and has 3 permanent bubbles on the adhesive itself.
I had this replaced then on the second one was perfect. No bubbles. Although one speck of dust made it through. It isn't easy to install and requires a lot of patience and slow application to get the bubbles out.
Technique for the is to let it adhere on the top then slowly work it to the bottom. Starting with the center then working to the edges also works but takes more time. It may have also caused the permanent bubbles to the adhesive as the seller who sold me this forced to press the bubbles out instead of working it out to the edges.
Pictures of the box, kit, and on the Note 8 to follow in a bit.
With the effort for this and the non full coverage I might consider the Whitestone Dome because I am tired trying out different protectors.
I have tried TPU (issue is the s-pen leaves marks on the protector), various edge adhesive protectors (some fit well some don't but all have the dot matrix and eventually dust gets in and in my use case of using the phone while walking in the rain water gets in), and finally this full adhesive but NOT FULL COVERAGE ONE). So far this is the best I have tried BUT lint still gathers on the edges and is driving me bonkers with the cleaning it out...

raphael.atienza said:
I think I got something similar to this. Php 1,300 so around $25.
It isnt full coverage (It cuts the screen and leaves the curve where it drops off exposed) and this first one I got had a flaw in the adhesive and has 3 permanent bubbles on the adhesive itself.
I had this replaced then on the second one was perfect. No bubbles. Although one speck of dust made it through. It isn't easy to install and requires a lot of patience and slow application to get the bubbles out.
Technique for the is to let it adhere on the top then slowly work it to the bottom. Starting with the center then working to the edges also works but takes more time. It may have also caused the permanent bubbles to the adhesive as the seller who sold me this forced to press the bubbles out instead of working it out to the edges.
Pictures of the box, kit, and on the Note 8 to follow in a bit.
With the effort for this and the non full coverage I might consider the Whitestone Dome because I am tired trying out different protectors.
I have tried TPU (issue is the s-pen leaves marks on the protector), various edge adhesive protectors (some fit well some don't but all have the dot matrix and eventually dust gets in and in my use case of using the phone while walking in the rain water gets in), and finally this full adhesive but NOT FULL COVERAGE ONE). So far this is the best I have tried BUT lint still gathers on the edges and is driving me bonkers with the cleaning it out...
Click to expand...
Click to collapse
Lint gathers on the side but at least the touch sensitivity is not affected. Also part of the screen is cut off and the edges are actually exposed.
Also it is weird that the manufacturer kept the black border even if this is full adhesive and again NOT FULL COVERAGE.

I think these are the same full adhesive protectors offered at AliExpress. Ordered one 3 weeks ago. Crap. Bubbles, cuts parts of display left, right, top, bottom. Inacceptable, full adhesive or not. Got it refunded and would not order it again.
Gesendet von meinem SM-N950FD mit Tapatalk

raphael.atienza said:
Lint gathers on the side but at least the touch sensitivity is not affected. Also part of the screen is cut off and the edges are actually exposed.
Also it is weird that the manufacturer kept the black border even if this is full adhesive and again NOT FULL COVERAGE.
Click to expand...
Click to collapse
If it doesn't cover the edges then that wouldn't work for me. I'm glad you like it, but for me, it's worthless if it doesn't cover the whole screen.
---------- Post added at 10:17 AM ---------- Previous post was at 10:16 AM ----------
ayinde6 said:
Someone finally did it, a Tempered glass inexpensive full back adhesive for the Note 8, not just the edges. <SNIP>
https://www.amazon.com/gp/product/B077GSJ55T/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Please post pictures as proof.

Mr. Orange 645 said:
If it doesn't cover the edges then that wouldn't work for me. I'm glad you like it, but for me, it's worthless if it doesn't cover the whole screen.
---------- Post added at 10:17 AM ---------- Previous post was at 10:16 AM ----------
Please post pictures as proof.
Click to expand...
Click to collapse
Uh I don't like it but it is good enough until I get a Whitestone Dome or other alternatives. I do not want to leave it bare and naked.

raphael.atienza said:
Uh I don't like it but it is good enough until I get a Whitestone Dome or other alternatives. I do not want to leave it bare and naked.
Click to expand...
Click to collapse
Gotcha. I'm using a wet apply screen protector for now. I like it other than the S-Pen leaves marks in it.

Mr. Orange 645 said:
Gotcha. I'm using a wet apply screen protector for now. I like it other than the S-Pen leaves marks in it.
Click to expand...
Click to collapse
Is it TPU? Is the Spigen one good? or maybe the wraparound Ringke?
Also which S-Pen Tip are you using the grey or the black one?

raphael.atienza said:
Is it TPU? Is the Spigen one good? or maybe the wraparound Ringke?
Also which S-Pen Tip are you using the grey or the black one?
Click to expand...
Click to collapse
Iit's the Armor suit Wet apply one it's not TPU, but is a soft screen protector.
I'm using the black tip. the white one was too hard and really dug into the screen protector.

Photos pf singularity tempered glass
Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.

ayinde6 said:
Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.
Click to expand...
Click to collapse
It's that full adhesive?

borijess said:
It's that full adhesive?
Click to expand...
Click to collapse
The first post explains it.
ayinde6 said:
Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.
Click to expand...
Click to collapse
That looks great! Looks like I'll be ordering one soon.

ayinde6 said:
Disclaimer I am not a photographer so sorry if the pictures aren't great I had to use an iPad to take them...as you can see Mine is not catching any lint, like the dome glass, wet install ones, and TPU. Also, as you can see in the pictures my box is different than the one posted in the above post. Not sure which brand theirs is.
Click to expand...
Click to collapse
Ooooh. Looks nice! Might order this...

raphael.atienza said:
Lint gathers on the side but at least the touch sensitivity is not affected. Also part of the screen is cut off and the edges are actually exposed.
Also it is weird that the manufacturer kept the black border even if this is full adhesive and again NOT FULL COVERAGE.
Click to expand...
Click to collapse
The one that I bought myself the box is different from yours and mine covers the screen fully, well more than this one.

borijess said:
It's that full adhesive?
Click to expand...
Click to collapse
Yes adhesive on the entire back of the screen

Tip, if you start screen protector from the top and work down using the squeegee provided then you can work out remaining bubbles with your fingers as long as you don't trap any dust under the screen should be bubble free

ayinde6 said:
Tip, if you start screen protector from the top and work down using the squeegee provided then you can work out remaining bubbles with your fingers as long as you don't trap any dust under the screen should be bubble free
Click to expand...
Click to collapse
Did you use the plastic jig that came with it? Some of the TGSPs i've bought in the past for my S8+ came with a jig like that, but they always set the TGSP about a millimeter too low so it wound up cutting off part of the status bar. NEVER enough to matter, but was still annoying. How's the alignment with this one?

Mr. Orange 645 said:
Did you use the plastic jig that came with it? Some of the TGSPs i've bought in the past for my S8+ came with a jig like that, but they always set the TGSP about a millimeter too low so it wound up cutting off part of the status bar. NEVER enough to matter, but was still annoying. How's the alignment with this one?
Click to expand...
Click to collapse
Yes I used to jig that came with it and IMO it is perfect it sits "right" below the selfie cam yeah I think I am set for screen protection for now may be I will re-review in a couple of weeks, see how it holds up.

Here are some more pics to show screen coverage. Again I am not a photographer lol I use the edge screen Sidebar a lot with no issues.