Database Develop

[M.A.D.] [ROM] [6.0.1] Unofficial CyanogenMod 13 - Doogee X5

CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the unofficial build of CM 13 for Doogee X5 made by the M.A.D. team.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download rom from here: https://www.facebook.com/MediatekAndroidDevelopers/
OR from xda DevDB (DOWNLOAD Tab)
Download Gapps from OpenGapps: http://opengapps.org/, choose ARM and Android 6.0
boot to recovery
wipe data if you are not coming from CM13.0 already
install rom and gapps
Reboot
XDA:DevDB Information
Unofficial CyanogenMod 13 - Doogee X5, ROM for all devices (see above for details)
Contributors
fire855, superdragonpt, DerTeufel1980
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Stock Android 6.0
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-08-18
Last Updated 2016-08-26

Reserved

Minimal F.A.Q
Q: After ROM boot up, I'm getting SetUP wizard errors / other Gapps FC / Black screen on first boot, why ?
A: On marshmallow based Roms, you need to flash ROM and gapps at the same time
TWRP even allows you to flash multiple .zip files
Q: Why no Mediatek Engineering Menu?
A: Its Mediatek proprietary, ugly , not needed on our builds.
Relevant features used on Mediatek E. Menu have been ported to our builds already using aosp / our implementations ( Sensors calibration , Band Mode, etc)
Q: App "x" is not working, why?
A: First make sure the app works under Marshmallow
Q: Something wrong with my Bluetooth, can't connect /pair with my "x" device , car-BT
A: Bluetooth should be backwards compatible , some OEMs don't also follow some guidelines , surely can be improved.
Post your BT model, Car model and year to help us out determining compatibility issues

one more

Thank you guys!!!
Asking permissions to port to my Infinix HOT 2
Will compile later for sure.
@fire855

superdragonpt said:
one more
Click to expand...
Click to collapse
Lazy spammer
Get back home from your vacations

Nonta72 said:
Thank you guys!!!
Asking permissions to port to my Infinix HOT 2
Will compile later for sure.
@fire855
Click to expand...
Click to collapse
Feel free to port it but you must give proper credits.
- The M.A.D. team -

fire855 said:
Feel free to port it but you must give proper credits.
- The M.A.D. team -
Click to expand...
Click to collapse
Of course I will.
But someone bested me in its fixing bugs in our HOT 2.
I will tell him to give proper credits when he uploads it.
Now, if I want to compile myself, will I need some patches ?
If yes, which ones ?
Thanks again !!!

Awesome work ! Will a port to Doogee X6 be available later ?
Best regards.

:good:
Thanks to you guys and all.
I hereby Ask for permissions to Port this to my TECNO W4
 @fire855 :good:

Nonta72 said:
Of course I will.
But someone bested me in its fixing bugs in our HOT 2.
I will tell him to give proper credits when he uploads it.
Now, if I want to compile myself, will I need some patches ?
If yes, which ones ?
Thanks again !!!
Click to expand...
Click to collapse
Yes, you need patches for missing symbols and RIL. Camera needs no more changes with MM blobs. I can't release these changes. You need to do that on your own or search for it if someone else released useful code.
- The M.A.D. team -

iykeDROID™ said:
:good:
Thanks to you guys and all.
I hereby Ask for permissions to Port this to my TECNO W4
@fire855 :good:
Click to expand...
Click to collapse
Yes, you can port it but give proper credits.
- The M.A.D. team -

BlackGunZ said:
Awesome work ! Will a port to Doogee X6 be available later ?
Best regards.
Click to expand...
Click to collapse
Has the X6 official Android 6.0 Update?
This Rom is based on the X5 6.0 Update with 3.18 kernel.
- The M.A.D. team -

fire855 said:
Has the X6 official Android 6.0 Update?
This Rom is based on the X5 6.0 Update with 3.18 kernel.
- The M.A.D. team -
Click to expand...
Click to collapse
Yes, X6 has a released 6.0 update with 3.18 kernel too !
Best regards.

Thanx a lot!:good:

fire855 said:
Yes, you need patches for missing symbols and RIL. Camera needs no more changes with MM blobs. I can't release these changes. You need to do that on your own or search for it if someone else released useful code.
- The M.A.D. team -
Click to expand...
Click to collapse
OK
Thank you!

Great Work, thanks a lot for CM13

fire855 said:
Yes, you can port it but give proper credits.
- The M.A.D. team -
Click to expand...
Click to collapse
NICE...always gonna give proper credit

link
Can you fix it?
Anyways thank you very much for this fantastic ROM!

As you are compiling CM13 for doogee x5? I took your tree and vendor, downloaded the source code CM13, but I have on user that to userdebug, eng piled on error. You in cyanogenmod source code to change anything but the tree and the vendor yet?

[ROM][LineageOS][N801x/N8000][ALPHA][10/08/2017]Nougat

LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
It can be used without any need to have any Google application installed.
CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
STATUS: ALPHA
This is a preview build, do not install it if you want a stable ROM.
This is a preview of what is going down on CM14.1
Rom is in beta state so many bugs are to be expected!
All the source code is available on my Github.
I do this on my free time and unfortunately I don't have much.
Any help is a appreciated!
LINKS IN SECOND POST
Source code: https://github.com/lirokoa
CREDITS:
The whole Cyanogenmod team
Special thanks @dhiru1602 for his awesome work on exynos 4
All people who works on the Exynos 4 SOC, they desserve it
XDA:DevDB Information
LineageOS N801X/N8000, ROM for the Samsung Galaxy Note 10.1
Contributors
lirokoa
Source Code: https://github.com/lirokoa
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Created 2016-11-22
Last Updated 2017-08-10

How to install:
Follow the usual procedure, important things is to use supported recovery, you can download it from the download section.
Also do not forget, wipe everything, install rom, then gapps without reboot between!
Others recovery will not be supported!
Also if you come from another ROM, full wipe is required.
FAQ:
Which Gapps to use? OpenGapps works great, you can get them from here
After installing ROM + Gapss, GApps keep crashing: Just update your recovery with the provided twrp (in cm-13.0 thread)
Keyboard does not work: enable hardware keyboard in settings.
If you don't want to see cursor while using S-Pen, you can disable it it in settings / inputs
Camera is not working: use google camera
SECURITY WARNING:
SElinux is set to permissive, I'm tired of rewriting those rules...

DOWNLOAD LINKS:
-10/08/2017:
-N801X: https://forum.xda-developers.com/devdb/project/dl/?id=26049
-N8000: https://forum.xda-developers.com/devdb/project/dl/?id=26052
Changelog:
- LineageOS update
Old releases :
-05/03/2017:
-N801X: https://forum.xda-developers.com/devdb/project/dl/?id=23476
-N8000: https://forum.xda-developers.com/devdb/project/dl/?id=23482
Changelog:
- LineageOS update
-16/01/2017:
-N801X: https://forum.xda-developers.com/devdb/project/dl/?id=22630
-N8000: https://forum.xda-developers.com/devdb/project/dl/?id=22631
Changelog:
- Welcome LineageOS
- Power off charging fixed
-09/12/2016:
-N801X: http://forum.xda-developers.com/devdb/project/dl/?id=21976
-N8000:http://forum.xda-developers.com/devdb/project/dl/?id=21998
Changelog:
- Android 7.1.1
- Fixed DRM
- Attempt to fix wifi tethering
-01/09/2016:
-N801X: http://forum.xda-developers.com/devdb/project/dl/?id=21696
-N8000:http://forum.xda-developers.com/devdb/project/dl/?id=21924

downloading now. Thanks lirokoa!!
*Edit - flashing crashes at checking md5 and reboots the recovery, Using TWRP 2.8.7

Any updates here guys?
Have a GT N8000 needing some care

Will try tonight thanks

lirokoa said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0, which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
Hi Lirokoa, do you still use github? i dont think there is updates for your cm14.1 work. cheers.

Great ROM
I installed the ROM yesterday. It has been very stable and fast. Thanks for extending the life of my tablet again.

This should work on a GT N8000 shouldn't it ?
I am downloading now
http://forum.xda-developers.com/showthread.php?t=1910913&page=2

Excellent Work
Fast, smooth, perfect...
Thanks

Dude you are awesome. Been rocking cm since buying my note new years ago. The one device that just will not die. Thank you for not forgetting her as so many older devices often get forgotten.

Just tried to Install on my GT N8000
It doesn't work it says its not for this model Bugger I was looking forward to Nougat on my N8000
Thanks anyway
Gaz

So for so good nice job

Would there be any way to get this ROM to install on a GT N8000 ??

little_lerroyy said:
Hi Lirokoa, do you still use github? i dont think there is updates for your cm14.1 work. cheers.
Click to expand...
Click to collapse
I'll clean up a bit and push in the next few days.

lirokoa said:
I'll clean up a bit and push in the next few days.
Click to expand...
Click to collapse
Oh awesome! BTW fantastic work you have done with the n801X. Much appreciated.

If you want to install on N8000:
Unzip updater-script (META-INF/com/google/android/) and remove first string. Replace it.

Gazzasore said:
Would there be any way to get this ROM to install on a GT N8000 ??
Click to expand...
Click to collapse
If you don't need radio capabilities, you can still install n8013 version. Try this: http://forum.xda-developers.com/showpost.php?p=64397238&postcount=76. Everything is working.

kodasnl said:
If you don't need radio capabilities, you can still install n8013 version. Try this: http://forum.xda-developers.com/showpost.php?p=64397238&postcount=76. Everything is working.
Click to expand...
Click to collapse
OK any idea what prgram they used to edit the ROM is this way
Cheers

Gazzasore said:
OK any idea what prgram they used to edit the ROM is this way
Cheers
Click to expand...
Click to collapse
Open Rom with 7Zip and edit with Notepad++.

[ROM] KENZO [7.1.1] LINEAGE OS -by Infinity {VoLTE} [18/01/2017]

LineageOS 14.1 is a free, community built, aftermarket firmware distribution of Android 7.1.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.​
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Hi all,
This is Unofficial build of LineAgeOS based on android 7.1.1 by me.
Steps to flash :
1. Download the latest build & GApps
2. Clean Flash the build & then GApps
3. If you want VoLTE then download the v2 patch by @Sudeep Duhoon and flash at the end
------------------------------------------------------------------------------------------------------------------
What's Working :
Boots
RIL (Calls, SMS, Data)
VoLTE
Fingerprint
Wi-Fi
Bluetooth
Camera
And other basic stuff
What's Not :
You Tell Me
Known Bugs :
LineageOS 14.1 is still in development. Some stuff will be missing or bugged. Flashlight is still buggy but it is not falut from my side
Find any bug ?
Please report and also give me logcat (if possible)
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Sources: https://github.com/LineageOS
Device specific sources: https://github.com/infinity06
Credits: For Development @Infinity and my helping friends @neonkat @rocknegi @TheDarkStrix @GreekDragon @AmolAmrit and many more
For VoLTE @Sudeep Duhoon
For device releated sources @TheStrix
Version Information:
Android OS Version: 7.1.1 (nougat)
Kernel Version: 3.10.x
Status: Unofficial
Created: 14/01/2017
Last Updated: 15/01/2017

What is the kernel used?
@Infinity

Reserved

some screenshots

reserve 2
last one

Goodix fingerprint supported?

Would be appreciated if u give details screenshots and features supported
Sent from my Redmi Note 3 using Tapatalk

have otas?

Camera and flash are buggy?
Thanks for your hardwork

Why another LOS 14.1??
Sent from my Redmi Note 3 using XDA Labs

What's the point of this ROM?

rmira said:
What is the kernel used?
@Infinity
Click to expand...
Click to collapse
I will upload my device tree , kernel and vendor on github. I will add this to OP but give me some time

leletoconnor said:
Goodix fingerprint supported?
Click to expand...
Click to collapse
Check and report.
I have fpc1020 fingerprint which works fine

0_RoXoR_0 said:
Would be appreciated if u give details screenshots and features supported
Click to expand...
Click to collapse
Features are same as cm14.1
And wait for screenshots i am adding it in OP

[email protected] said:
Camera and flash are buggy?
Thanks for your hardwork
Click to expand...
Click to collapse
Use camu app inbuilt app may crash sometime

Infinity said:
Check and report.
I have fpc1020 fingerprint which works fine
Click to expand...
Click to collapse
Is there still flashlight/camera bugs

tom jp said:
Is there still flashlight/camera bugs
Click to expand...
Click to collapse
For me camera is good but flashlight is still an issue
Blame Xiaomi for that

and any different with minz1 build?

Deleted

Nice work bro
Don't bother for the comments by people about why another build
Keep up the good work

[ROM][UNOFFICIAL][DISCONTINUED] LineageOS 15.1 for Xiaomi Mi6

LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for LineageOS 15.1 builds for Xiaomi Mi 6. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
WARNING:
This is an early preview of LineageOS 15.1, there's no guarantee it'll work stable.
Database migration from previous LineageOS is currently NOT supported, you MUST perform a data wipe before.
Tips:
SELinux works in permissive
FBE is currently not supported
NFC is a bit buggy and drains a lot in standby, disable it when you don't use it.
You need at least MIUI Global Oreo 8.2.8 firmware, otherwise you'll get error 7 when installing the zip. Latest MIUI Global Oreo firmware is recommended.
Installation:
First time flashing LineageOS 15.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (I recommend twrp-3.2.1-0-sagit-blankaf-3.img as it works with /vendor (/cust) partition and February security patch decryption.)
Perform a nandroid backup of your current ROM (Optional)
Format data & wipe system, data, cache and dalvik cache
Flash LineageOS
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/LineageOS
https://github.com/blankaf/device_xiaomi_sagit
https://github.com/blankaf/vendor_xiaomi_sagit
https://github.com/blankaf/kernel_xiaomi_msm8998
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
ROM
https://www.androidfilehost.com/?w=files&flid=248834
Firmware
https://androidfilehost.com/?w=files&flid=237301
XDA:DevDB Information
LineageOS 15.1 for Xiaomi Mi6, ROM for the Xiaomi Mi 6
Contributors
blankaf
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Created 2018-02-24
Last Updated 2018-04-08

"Battery is draining like crazy!!!!!!" Disable NFC when you don't use it

blankaf said:
"Battery is draining like crazy!!!!!!" Disable NFC when you don't use it
"Bootloop!!!!" You need to "format data" as this rom is not FBE at the moment.
Click to expand...
Click to collapse
hope that battery drain is fixed on next releases. does QC working fine?

zilan said:
hope that battery drain is fixed on next releases. does QC working fine?
Click to expand...
Click to collapse
Yes it does.

thanks!

How's battery life?
Maybe some day we will receive official?
If not how ofter you will be update this rom?
Tapatalk - Xiaomi Mi6

Great work.Thank you

@blankaf
It's good practice to mention in credits people who works you based on
device_xiaomi_sagit - it's based on xiaobai https://github.com/thune-xiaobai/android_device_xiaomi_sagit/tree/lineage-15.1-unclean
vendor_xiaomi_sagit - based on NisseCool
few days ago I saw what repo you forked but you delete it
unfortunately, I haven't chance to find any of your previous project.
could you tell as please your achievement as a developer
thanks

wojtoo said:
@blankaf
It's good practice to mention in credits people who works you based on
device_xiaomi_sagit - it's based on xiaobai https://github.com/thune-xiaobai/android_device_xiaomi_sagit/tree/lineage-15.1-unclean
vendor_xiaomi_sagit - based on NisseCool
few days ago I saw what repo you forked but you delete it
unfortunately, I haven't chance to find any of your previous project.
could you tell as please your achievement as a developer
thanks
Click to expand...
Click to collapse
Ummm, do you know who made blankaf? Hint: the answer is in your post.

Does this have the new launcher and camera features?

Ultraschorsch said:
Ummm, do you know who made blankaf? Hint: the answer is in your post.
Click to expand...
Click to collapse
How its related to my post?
so now we have same undercover developer who can disappear by night ?
good luck

wojtoo said:
How its related to my post?
so now we have same undercover developer who can disappear by night ?
good luck
Click to expand...
Click to collapse
Just don't use the ROM.
XDA isn't meant to be personal. Just a webpage to share work.
If you don't like it just don't use it I guess.
Whatever gets done is usually added to github so any changes can be forked into others builds so improvement happens regardless of the developer abandoning the project etc.
That's the point of android development. Its open source so progress is shared.
Don't worry too much and go with the flow

Dobsgw said:
Just don't use the ROM.
XDA isn't meant to be personal. Just a webpage to share work.
If you don't like it just don't use it I guess.
Whatever gets done is usually added to github so any changes can be forked into others builds so improvement happens regardless of the developer abandoning the project etc.
That's the point of android development. Its open source so progress is shared.
Don't worry too much and go with the flow
Click to expand...
Click to collapse
What Dobsgw said

Installed. So far working great. I will test more.
Tapatalk - Xiaomi Mi6

ermacwins said:
Does this have the new launcher and camera features?
Click to expand...
Click to collapse
no, but it's stable, smooth, looks like power hal implemented correctly
only charging light not working

When we got official los15.1 ?
Its have interesting changes in official ui.

Thanks for your hard work!
I flashed this ROM,and found a issues.
Every time I put the Sim card into the phone. it just pop up"com.android.phone has stopped"over and over again.
If there is no Sim card in it , it is normal.

I don't have this issue
Tapatalk - Xiaomi Mi6

LineageOS 15.1 - 25th Feb
SELinux is now enforcing (Huge thanks to @DanWard)
Upstream kernel to 4.4.118
Blobs from MIUI Global Oreo 8.2.24
Some misc tweaks
Synced with LineageOS code
lineage-15.1-20180225-UNOFFICIAL-sagit.zip
NFC might still drain a lot of battery, disable it when you don't use it!
I am pretty sure goodix fingerprint sensor works but I can't test it as I have fpc, If someone tested the goodix fingerprint sensor would be appreciated! Confirmed working
If you find any bugs that weren't there in last build a logcat would be very appreciated!

Liaoyiwa said:
Thanks for your hard work!
I flashed this ROM,and found a issues.
Every time I put the Sim card into the phone. it just pop up"com.android.phone has stopped"over and over again.
If there is no Sim card in it , it is normal.
Click to expand...
Click to collapse
Wow thanks great job

[ROM][UNOFFICIAL][instantnoodlep][13] LineageOS 20

Disclaimer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
Hi there,
Here are some unofficial build based on fresh android 13!
You can expect regular weekly/monthly releases till the official lineage 20 release for our device
LineageOS is a free, community-built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restores the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions :
https://wiki.lineageos.org/devices/instantnoodlep
What's not working ?
You tell me.
Downloads.
ROM & Recovery: Google Drive
Gapps: MindTheGapps
Sources.
Kernel tree : android_kernel_oneplus_sm8250
Hardware tree : android_hardware_oplus
Device trees : device_oneplus_sm8250-common
device_oneplus_instantnoodlep
Vendor tree : android_vendor_oneplus_sm8250-common
android_vendor_oneplus_instantnoodlep
Android version: 13
Required firmware: IN2025-C.33+ or analog EU/CN etc. variant
Security patch level: October, 2022
Credits to @LuK1337 and the whole LineageOS team and community @Neil_Armstrong_ for a post template

Sweetness, rocking this rom and all seems to be working fine on my Verizon simmed IN2025.

HolyHog said:
Sweetness, rocking this rom and all seems to be working fine on my Verizon simmed IN2025.
Click to expand...
Click to collapse
Enjoy

Hello,
Thanks for the efforts.
Is it possible to upgrade from Los 19 without deleting data ?

ErenJones said:
Hello,
Thanks for the efforts.
Is it possible to upgrade from Los 19 without deleting data ?
Click to expand...
Click to collapse
Well you actually can give it a shot, but no guarantee that it would work without issues. Or just make a backup to be safe

Hello! I want to ask you a few questions if possible:
- Does this ROM have Dolby Atmos?
- Does it support 120hz?
- When will it become official?

AbyssLumine said:
Hello! I want to ask you a few questions if possible:
- Does this ROM have Dolby Atmos?
- Does it support 120hz?
- When will it become official?
Click to expand...
Click to collapse
Lineageos doesn't shipping with Dolby, 120 Hz supported as usual, the point of this is giving UNOFFICIAL builds till official lineage 20

Is the build steps the same as in https://wiki.lineageos.org/devices/instantnoodlep/build
Except replacing the branch to lineage-20 ?
Also the changelog points to lineage 19.1
https://www.lineageoslog.com/19.1

ErenJones said:
Is the build steps the same as in https://wiki.lineageos.org/devices/instantnoodlep/build
Except replacing the branch to lineage-20 ?
Also the changelog points to lineage 19.1
https://www.lineageoslog.com/19.1
Click to expand...
Click to collapse
Yeah, same build steps nothing special