Database Develop

G920F HEADPHONES Volume BOOST Mod (Safe - Stable) --Updated for 5.1.1--

Headphone Boost Mod for 5.1.1 & 5.0.2
Here is my modified file for a nice boost to the audio that isn't too much so it wont blow the earphones you use
works well with custom EQ in SoundAlive (Such as bass etc)
Tested on both 5.0.2 and 5.1.1
doesn't modify the phone internal speakers for safety reasons to the phone
Download 5.1.1 http://www.solidfiles.com/d/345bbbc64c/
Download 5.0.2 http://www.solidfiles.com/d/09d9918f0f/
How To Install:
Download file to phone, use root browser to copy the file and place it in System -- ETC, then set permissions to 0644 (if permissions are already that change them then change it back to 0644​

Rossyyy said:
Here my modified file for a nice boost to the audio that isn't too much
Download http://www.solidfiles.com/d/c2e6a83d2e/mixer_paths.xml
How To Install:
Download file and place it in System --> Etc and set permissions to 0644​
Click to expand...
Click to collapse
Is this only the headphone modified and what about the main speaker and the in-call volume !
thanks

machhho said:
Is this only the headphone modified and what about the main speaker and the in-call volume !
thanks
Click to expand...
Click to collapse
I only felt the headphones was needed

Rossyyy said:
I only felt the headphones was needed
Click to expand...
Click to collapse
thanks , but can you sligtly increase the main speaker

Rossyyy said:
Here my modified file for a nice boost to the audio that isn't too much
Download http://www.solidfiles.com/d/c2e6a83d2e/mixer_paths.xml
How To Install:
Download file and place it in System --> Etc and set permissions to 0644​
Click to expand...
Click to collapse
virus warning

Right click @ download link , and SAVE AS :
:good:

Mc0815 said:
virus warning
Click to expand...
Click to collapse
???

machhho said:
thanks , but can you sligtly increase the main speaker
Click to expand...
Click to collapse
This worked for me: http://www.droidviews.com/boost-headphone-and-speaker-volume-on-galaxy-s6-s6-edge/

reubenskelly1992 said:
???
Click to expand...
Click to collapse
It's just an xml file

Rossyyy said:
It's just an xml file
Click to expand...
Click to collapse
I meant someone wrote virus warning?

raakaysh said:
This worked for me: http://www.droidviews.com/boost-headphone-and-speaker-volume-on-galaxy-s6-s6-edge/
Click to expand...
Click to collapse
thanks

I've tried the same - did not work - messed up the sound during phone calls...had to return back to original.
Used below link to return back to original...
http://forum.xda-developers.com/attachment.php?attachmentid=3277537&d=1429785671

Atakancon said:
I've tried the same - did not work - messed up the sound during phone calls...had to return back to original.
Used below link to return back to original...
http://forum.xda-developers.com/attachment.php?attachmentid=3277537&d=1429785671
Click to expand...
Click to collapse
Yup confirmed it screws out the sound during calls with static noise. Don't use this mod!
G920F

Modified now, it is working perfectly
Inviato dal mio SM-G920F utilizzando Tapatalk

6pudu5 said:
Modified now, it is working perfectly
Inviato dal mio SM-G920F utilizzando Tapatalk
Click to expand...
Click to collapse
no static in calls now then?

It does not work properly.
After installation the volume crackles.

this is why i didnt turn up the speakerphone

Rossyyy said:
this is why i didnt turn up the speakerphone
Click to expand...
Click to collapse
why when this fashion Volume Mod V3 Flashable when calling crackling dynamics

Can this be used on another ROM? Or only works with stock? Thanks.

I have based my mixer_paths.xml on yours hope you don't mind mine has the external speaker volume raised as my S6 does not wake me up in the morning
Well that's what i blame it on lol
I will upload a link when XDA allows me i don't have enough posts :crying:
iNeoTom

Dolby Atmos Lepro 3

Hi Guys,
I have taken the liberty to post Dolby Atmos ported from LeEco Le pro 3 so it can be used for our custom rom’s.
I have tested and working ( including dirty flash over Le Max 2)
Big thanks to original owner @ahrion
dax_lepro3
Collective Dolby Atmos Port Thread

It would probably be more efficient to link my entire thread than just upload the specific Atmos to it. However I have an update coming for that specific one either tomorrow or today in which the original link is removed and replaced with a new link + mirror.

ahrion said:
It would probably be more efficient to link my entire thread than just upload the specific Atmos to it. However I have an update coming for that specific one either tomorrow or today in which the original link is removed and replaced with a new link + mirror.
Click to expand...
Click to collapse
Thanks bro. This is an awesome work.
I will have it linked when you upload the stable version.

saraprobe said:
Thanks bro. This is an awesome work.
I will have it linked when you upload the stable version.
Click to expand...
Click to collapse
Link my thread.

ahrion said:
It would probably be more efficient to link my entire thread than just upload the specific Atmos to it. However I have an update coming for that specific one either tomorrow or today in which the original link is removed and replaced with a new link + mirror.
Click to expand...
Click to collapse
By the way what does deep buffer do?

saraprobe said:
By the way what does deep buffer do?
Click to expand...
Click to collapse
On some ROMs/devices streaming + V4A or Dolby does not work. It appears to be working but you can't hear the difference, flashing the deep_buffer fix deletes audio_policy.conf lines. On some devices this could cause a bootloop. If you don't have that problem, there's no need to flash.

ahrion said:
On some ROMs/devices streaming + V4A or Dolby does not work. It appears to be working but you can't hear the difference, flashing the deep_buffer fix deletes audio_policy.conf lines. On some devices this could cause a bootloop. If you don't have that problem, there's no need to flash.
Click to expand...
Click to collapse
One thing i have noticed with Lemax 2 port was volume tend to fluctuate in when its low. has anyone reported this?

saraprobe said:
One thing i have noticed with Lemax 2 port was volume tend to fluctuate in when its low. has anyone reported this?
Click to expand...
Click to collapse
I would assume this varies by device. However I wouldn't differentiate it with the one that comes with your stock rom. I include a modified version of the dax_default.xml in which I remove the volume heightening restriction and turn on audio regulation/modifications.
ETA: This allows your audio to reach higher highs, lower lows, and more consistent mids. Rather than a locked sound. Turn the left EQ bar all the way up and use V4A and you'll hear your bass thump without being too overbearing.

ahrion said:
I would assume this varies by device. However I wouldn't differentiate it with the one that comes with your stock rom. I include a modified version of the dax_default.xml in which I remove the volume heightening restriction and turn on audio regulation/modifications.
ETA: This allows your audio to reach higher highs, lower lows, and more consistent mids. Rather than a locked sound. Turn the left EQ bar all the way up and use V4A and you'll hear your bass thump without being too overbearing.
Click to expand...
Click to collapse
I noticed stock was locked in Leeco lepro 3

saraprobe said:
I noticed stock was locked in Leeco lepro 3
Click to expand...
Click to collapse
Right. I removed that restriction.

ahrion said:
Right. I removed that restriction.
Click to expand...
Click to collapse
Which one? old upload or new one coming up?

saraprobe said:
Which one? old upload or new one coming up?
Click to expand...
Click to collapse
I removed it in all the Dolby Atmos I've ported.

ahrion said:
I removed it in all the Dolby Atmos I've ported.
Click to expand...
Click to collapse
cool no worries

Hi @ahrion i tried to flash yours over stock rom which has Dolby but i am getting FC.
Can i manually place files or is anything i can do to get it going?

saraprobe said:
Hi Guys,
I have taken the liberty to post Dolby Atmos ported from LeEco Le pro 3 so it can be used for our custom rom’s.
I have tested and working ( including dirty flash over Le Max 2)
Big thanks to original owner @ahrion
dax_lepro3
Collective Dolby Atmos Port Thread
Click to expand...
Click to collapse
It its work on miui rom?

jimbo1212 said:
It its work on miui rom?
Click to expand...
Click to collapse
Try with magisk

Ok i will try it

hi
i try with cydras 20s :sound good (music,film...).but i lost sound in phone :/

coke15 said:
hi
i try with cydras 20s :sound good (music,film...).but i lost sound in phone :/
Click to expand...
Click to collapse
Uninstall or disable Audio FX, then reboot...

Hi. Thanks but i can't find audio fx? No audio fx on apps,neither with titanium?
Where is it hiden?

SoundMod [Nougat 2.33/0.160]

SoundMod​
The increased volume in headphones and Bluetooth headphones.

can you expain please how to install it ? 32.4.a.0.160

kazam2k said:
can you expain please how to install it ? 32.4.a.0.160
Click to expand...
Click to collapse
This mod is installed using TWRP.

this mod only for headphones?

Superrman said:
this mod only for headphones?
Click to expand...
Click to collapse
Yes, only for headphones. Increasing the loudness of the loudspeaker is not suitable, because when the volume is too high, the cutoff protection is activated and the volume is reduced.

Just wanted to say that the 0.160 mod works perfectly on 32.4.A.1.54 with the Magisk Audio Modification Library module :good:
Unfortunately I have to paste the file every time I update AML >.>

do you have this mod for 32.4.a.1.54?

ViciousDiplomat said:
do you have this mod for 32.4.a.1.54?
Click to expand...
Click to collapse
Yes, there is.

N950F/N950FD dual speaker for android pie (9.0)

Nice work by N950FXXU5DSB2
Download File "mixer_gains.xml" and "mixer_paths.xml"
https://drive.google.com/file/d/1EJsHN9LyiUBe419O4EGYgDe4XEXqphVT/view?usp=sharing
https://drive.google.com/file/d/1Sj8S8VKt_9gNEHC0Jtq6tLdJPma-yujF/view?usp=sharing
Backup origin file "mixer_gains.xml" and "mixer_paths.xml"
TWRP copy file to "/system/etc/"
Restart phone enjoy！
Edit file "mixer_gains.xml" can increase handset volume power.(suggest value don't over 36) (40 is very loud！)
<path name="gain-media-speaker">
<ctl name="HPOUT3L Input 1 Volume" value="36" />
<ctl name="HPOUT3R Input 1 Volume" value="36" />
</path>

Any non root method?

good job! tested, working! thank you bro.

Working flawlessly
Thank you so much

non root method would be aprecciated

Nvm. It works on Pie. Thanks.

Any solutions for get dual speakers without ROOT?

Wave3.3 said:
Any solutions for get dual speakers without ROOT?
Click to expand...
Click to collapse
Get two phones :silly:

Not a bat idea ? . We can search stereo mini speakers to buy and attach to phone

I try it sound not working can any one make video what can we do to make it working
Sent from my SM-N950F using Tapatalk

Not working
SM-N950F cihazımdan Tapatalk kullanılarak gönderildi

Tnx alot bro
It works fine...,
Thats a new experience
But can i just ask, are the sound of the ear piece and the main speaker can be adjusted separately?? I mean with those code in mixer_gain.xml ..., or no, just the 36 in gain_media_speaker is for both of them??

Plz make magisk module

Refreshing the link
Will you please refresh the link. The link is not working anymore. I seriously need both the files as i messed up noth the xml pages and not a single sound is working on my phone

ROHBAR said:
Will you please refresh the link. The link is not working anymore. I seriously need both the files as i messed up noth the xml pages and not a single sound is working on my phone
Click to expand...
Click to collapse
Here is a working one! https://forum.xda-developers.com/galaxy-note-8/themes/note-8-soundmod-magisk-module-t3677719
You'll find a Google Drive Link with original mixer files and modded mixer files (Dual Speaker Mod)
He has a TWRP-flashable ZIP and Magisk-flashable ZIP, but you can also extract the modded mixer files and copy them manually.
The mixer files for Oreo (Android 8) also work for Pie (Android 9). I hope this helps.

[MOD][24/02][v2] Dual Speaker Mod For Realme 3 Pro

This mod enables the earpiece to be used as a secondary speaker while playing music or videos.
Disclaimer : I'm not responsible for any damage to your device.
Youtube :
Downloads :
Modded Mixer
Stock Mixer
Steps :
Download the modified mixer [Normal or Boosted]
Rename it to original mixer file name [Only if you have downloaded the boosted version]
Copy the modified mixer file and paste it into /system/vendor/etc
Replace the original mixer
Reboot
Done
NOTE :To uninstall, download the stock mixer and follow the same procedure.
Credits :
Dante63 for his mega-guide
Regards,
acervenky

Changelog
v1 :
Code:
Initial Release
v2 :
Code:
Latest mixer from RUI
Added Headphone Boost
Increase earpiece gain by 2dB
Regards,
acervenky

Does it work on realme 3

BISHOYR2FAT said:
Does it work on realme 3
Click to expand...
Click to collapse
Backup the original file and try it!
If the audio paths are same this file should work without causing any issues.
Regards,
acervenky

Need root broh?

acervenky said:
This mod enables the earpiece to be used as a secondary speaker while playing music or videos.
Disclaimer : I'm not responsible for any damage to your device.
Instructions & Working :
Downloads : Releases
Steps :
Download the modified mixer [Normal or Boosted]
Rename it to original mixer file name [Only if you have downloaded the boosted version]
Copy the modified mixer file and paste it into /system/vendor/etc
Replace the original mixer
Reboot
Done
Credits :
Dante63 for his mega-guide
Regards,
acervenky
Click to expand...
Click to collapse
Can you tell that wether or not realme x will receive such mod??

acervenky said:
Backup the original file and try it!
If the audio paths are same this file should work without causing any issues.
Regards,
acervenky
Click to expand...
Click to collapse
I have tried it and it is not the same do you have any other way?

Abby 244 said:
Can you tell that wether or not realme x will receive such mod??
Click to expand...
Click to collapse
Yes it can definitely get the mod, if I manage to get my hands on the device or find some testers!
Regards,
acervenky

BISHOYR2FAT said:
I have tried it and it is not the same do you have any other way?
Click to expand...
Click to collapse
Please provide all the mixer files from your device!
Regards,
acervenky

acervenky said:
Yes it can definitely get the mod, if I manage to get my hands on the device or find some testers!
Regards,
acervenky
Click to expand...
Click to collapse
Then will it sound like stereo speakers like in some high end mobiles?

Abby 244 said:
Then will it sound like stereo speakers like in some high end mobiles?
Click to expand...
Click to collapse
It depends on the quality and the position of the earpiece! If the earpiece is loud on stock rom, then you'll get better results with this type of mods.
Regards,
acervenky

acervenky said:
Please provide all the mixer files from your device!
Regards,
acervenky
Click to expand...
Click to collapse
Where are they exactly

one might need root access i guess

NagooPhone said:
one might need root access i guess
Click to expand...
Click to collapse
Do you know how to root realme 3?

BISHOYR2FAT said:
Do you know how to root realme 3?
Click to expand...
Click to collapse
there should be guide , let me check it.

NagooPhone said:
there should be guide , let me check it.
Click to expand...
Click to collapse
Okay

BISHOYR2FAT said:
Do you know how to root realme 3?
Click to expand...
Click to collapse
Have you unlocked your bootloader?
Regards,
acervenky

acervenky said:
Have you unlocked your bootloader?
Regards,
acervenky
Click to expand...
Click to collapse
No

Just a tip!
In case FX file manager or Root explorer failed, you can try copy it using TWRP File Manager.Mount System and vendor and Copy files to /vendor/etc and /system_root/vendor/etc and chmod both of them to 0644. Btw nice work OP!

Do you have original file?
how can I get back to the single mode speaker?
I didn't back up the original file by mistake.
Could you be able to upload the original file too?