TWRP 3.2.3-0 for Moto Z2 Play (albus)
Latest TWRP changelog :
3.2.3-0 full changelog
Working/Bugs :
I have just basically tested and all seems to be working (including decryption of /data and mount External SDCard).
Installation Guide :
Make sure you have unlocked bootloader.
Reboot to bootloader and install.
Use command: fastboot flash recovery twrp-3.2.3-0-albus.img to install.
Download Link :
twrp-3.2.3-0-albus.img
How to use TWRP for first time:
1- Unlock Bootloader (search in Google how to do);
2- Flash TWRP via CMD and reboot recovery;
3- Boot in TWRP and allow permission to modify system (internal storage don't be accessible);
4- Go to Wipe > Format Data > type YES and swipe (you will see an error formatting data);
5- Back to TWRP Menu, go to Reboot and Recovery;
6- In TWRP, go to Wipe > Format Data > type YES and swipe again (TWRP will decrypt internal storage);
7- Reboot to TWRP one more time and internal storage will be accessible;
8- DONE!!!
How to Root Stock Oreo:
1- Boot in TWRP;
2- Go to Backup > mark Boot and System partition > Swipe to backup (don't needed system_image);
3- After this, go to Restore > select Boot and System > Swipe to restore;
4- After finished, install zip Magisk (17.1 or 17.3);
5- Reboot and DONE!!!
You don't need flash F2FS zip and too don't need any command in the terminal.
You don't need to do anything else!
Click to expand...
Click to collapse
Credits :
@Junior Passos
Thanks so much to @Dees_Troy, @Santhosh M and @vache.
:highfive:
Thanks for this Junior. I've installed it and works. Over wrote the previous ver so didn't have to format data. Finally able to make a backup straight to the sdcard.
Thanks,i had temporarily boot TWRP 3.2.0.I'm now able to mount internal and external sd-card.New TWRP successfully decrypt my data partition.I have installed magisk and it works now.Many many thank
I cannot backup any partition on micro sd card, it's only saying "updating partition details..."
Borchuck said:
I cannot backup any partition on micro sd card, it's only saying "updating partition details..."
Click to expand...
Click to collapse
SD Card in TWRP works without no problem.
i try to boot & try to flash in xt1710-06 but just say
fastboot boot twrp-3.2.0-0-albus.img
downloading 'boot.img' ...
and the device just get freeze... i need to press all buttons to restart....
and i try with twrp_3.1.1-0_albus.img
and is not possible get in twrp
Junior Passos said:
SD Card in TWRP works without no problem.
Click to expand...
Click to collapse
For me it shows nothing under the "Progress:" and I've tried two different sd cards.
Borchuck said:
For me it shows nothing under the "Progress:" and I've tried two different sd cards.
Click to expand...
Click to collapse
Hi,
Have you flashed TWRP or temporarily boot into TWRP ?
I have temporarily boot into TWRP,and the Backup stucks too
Gesendet von meinem Moto Z2 Play mit Tapatalk
Archerous said:
Hi,
Have you flashed TWRP or temporarily boot into TWRP ?
I have temporarily boot into TWRP,and the Backup stucks too
Gesendet von meinem Moto Z2 Play mit Tapatalk
Click to expand...
Click to collapse
Yes, I have temporarily boot. Are you suggesting I should flash it? Anyway, thanks for help!
Borchuck said:
Yes, I have temporarily boot. Are you suggesting I should flash it? Anyway, thanks for help!
Click to expand...
Click to collapse
Dont flash it,if you not have the original recovery.img.Without original recovery,you cant update your phone via OTA
Gesendet von meinem Moto Z2 Play mit Tapatalk
Archerous said:
Dont flash it,if you not have the original recovery.img.Without original recovery,you cant update your phone via OTA
Gesendet von meinem Moto Z2 Play mit Tapatalk
Click to expand...
Click to collapse
Well, in fact, first what I've done after purchasing the phone was disable Updater.apk and unlocked bootloader -I don't care about OTA. I only want to know is this TWRP working well and could be used as a daily driver. If yes I would gladly flash it. All in all I could make recovery backup, right?
Borchuck said:
Well, in fact, first what I've done after purchasing the phone was disable Updater.apk and unlocked bootloader -I don't care about OTA. I only want to know is this TWRP working well and could be used as a daily driver. If yes I would gladly flash it. All in all I could make recovery backup, right?
Click to expand...
Click to collapse
Ok,then you can flash it.Or ask the OP with a pn
Gesendet von meinem Moto Z2 Play mit Tapatalk
Archerous said:
Ok,then you can flash it.Or ask the OP with a pn
Gesendet von meinem Moto Z2 Play mit Tapatalk
Click to expand...
Click to collapse
I've flashed it and it work absolutely great! Thank you so much.
One more question: can you tell me what is "System image" backup? I thought I have full system partition backup when I choose just "System" and "Data" if I want to store my settings and apps...
Borchuck said:
I've flashed it and it work absolutely great! Thank you so much.
One more question: can you tell me what is "System image" backup? I thought I have full system partition backup when I choose just "System" and "Data" if I want to store my settings and apps...
Click to expand...
Click to collapse
You don't have to backup the system image since stock images are available.
Please keep in mind that TWRP does not backup the extremely important /data/media folder. See also https://twrp.me/faq/backupexclusions.html. So I usually do the following: Via TWRP's terminal I move media to media2 and then backup the data partition. When the backup is finished I move media2 back to media (you also have to do that when you restore your backup obviously).
Borchuck said:
Yes, I have temporarily boot. Are you suggesting I should flash it? Anyway, thanks for help!
Click to expand...
Click to collapse
Temporary boot don't have successfull permissions to create system backup. For this, use permanent flash.
bear263 said:
Thanks for this Junior. I've installed it and works. Over wrote the previous ver so didn't have to format data. Finally able to make a backup straight to the sdcard.
Click to expand...
Click to collapse
Borchuck said:
I've flashed it and it work absolutely great! Thank you so much.
One more question: can you tell me what is "System image" backup? I thought I have full system partition backup when I choose just "System" and "Data" if I want to store my settings and apps...
Click to expand...
Click to collapse
I have the alternate TWRP installed.
Can I just flash this in fastboot and overwrite the other with no other steps needed?
pizza_pablo said:
I have the alternate TWRP installed.
Can I just flash this in fastboot and overwrite the other with no other steps needed?
Click to expand...
Click to collapse
Yes, it should overwrite previous one.
Borchuck said:
Yes, it should overwrite previous one.
Click to expand...
Click to collapse
Great, so I won't have to wipe anything, just carry on with a new version of TWRP?
pizza_pablo said:
Great, so I won't have to wipe anything, just carry on with a new version of TWRP?
Click to expand...
Click to collapse
If you've wiped in previous version then it's already done. You can start using this.
Borchuck said:
If you've wiped in previous version then it's already done. You can start using this.
Click to expand...
Click to collapse
Piece of mind is priceless!
Thanks, again!
Related
Hi to all!! I've done a little modification to the original CWM to add support to the secondary partition we use in every CM/MIUI etc...
All is done! Now works without an error of mounting "/sd-ext" due to an "unknown volume type!!" in recovery.fstab.
I also included the recovery for the SDMerge and also a linux script. Sorry, but the archive is too big to post it here on xda so i had to upload it on 4shared.
Requirements:
1) Rooted phone (obviously!!)
Instuctions Windows:
1) Download the package from 4shared
2) Extract it in any folder you prefer
3) Make sure you have USB Debugging on
4) Run "CWM-Installer.bat" as administrator
5) Hit enter
6) Wait, if it takes too long simply disconnect the device and reconnect it immediatly.
5) Enjoy the new recovery!!:victory:
Instructions Ubuntu/Debian/Mint:
1) Download the package from 4shared
2) Extract it
3) Make sure you have the sdk properly installed with adb (if not check here: http://forum.xda-developers.com/showthread.php?t=2100673 )
4) Run the script by typing
Code:
./CWM-Installer.sh
5) Enjoy the new recovery
The script is for stock roms but it works well even on CM or CM-Based ROMs so don't worry if you get errors, it's normal.
If you want your old recovery back you can open the CWM-Installer.bat with an editor and replace this
Code:
Files\adb push Files\recovery.img /data/local/recovery.img
With this:
Code:
Files\adb push Files\[COLOR=Red]CWMrecovery_orig[/COLOR].img /data/local/recovery.img
or if you want the recovery for the SDMerge just replace:
Code:
Files\adb push Files\recovery.img /data/local/recovery.img
with this:
Code:
Files\adb push Files\SDmergerecovery.img /data/local/recovery.img
And then run the script again.
Feel free to post comments!!
Download here:
http://www.4shared.com/archive/8HmnogYQ/CWM-Installer-E400tar.html
wow, long time no see...
keep it up buddy
yayakuya said:
wow, long time no see...
keep it up buddy
Click to expand...
Click to collapse
Thanks yaya, I was busy with work and home and I haven't internet at home so I can't download the huge GBs of a repo.
Works like said great job keep it up buddy!
Cobmaster said:
Hi to all!! I've done a little modification to the original CWM to add support to the secondary partition we use in every CM/MIUI etc...
All is done! Now works without an error of mounting "/sd-ext" due to an "unknown volume type!!" in recovery.fstab.
Requirements:
1) Rooted phone (obviously!!)
Instuctions:
1) Download the attachment
2) Extract it in any folder you prefer
3) Make sure you have USB Debugging on
4) Run "CWM-Installer.bat" as administrator
5) Hit enter
6) Wait, if it takes too long simply disconnect the device and reconnect it immediatly.
5) Enjoy the new recovery!!:victory:
The script is for stock roms but it works well even on CM or CM-Based ROMs so don't worry if you get errors, it's normal.
IT DOESN'T WORK WITH SDMerge MOD!!!
If you want your old recovery back you can open the CWM-Installer.bat with an editor and replace this
Code:
Files\adb push Files\recovery.img /mnt/extra-sd/recovery.img
With this:
Code:
Files\adb push Files\[COLOR=Red]CWMrecovery_orig[/COLOR].img /mnt/extra-sd/recovery.img
And then run the script again.
Feel free to post comments!!
Click to expand...
Click to collapse
i created a flashable zip for the recovery her it is please thank me.:good:
jeffreyvh said:
i created a flashable zip for the recovery her it is please thank me.:good:
Click to expand...
Click to collapse
I used the script written a long time ago for who has only the device rooted but hasn't the recovery installed... Btw good job!
@Cobmaster, could you make similar recovery specifically for data2sdext on stock rom?
I already create similar mod based on this tutorial and it works flawlessly but lack of support from recovery (i.e can't backup/restore from sd-ext)
andwie said:
@Cobmaster, could you make similar recovery specifically for data2sdext on stock rom?
I already create similar mod based on this tutorial and it works flawlessly but lack of support from recovery (i.e can't backup/restore from sd-ext)
Click to expand...
Click to collapse
Are you talking about e405? Or you want a recovery modded to support the partition table in stock rom?
I think I can but I need more specs of the partitioning you use for the sd. I need the specific "/dev/block/mmcblk***" of the partitions in the sd. Nothing more (and a little bit of time obviously!).
Cobmaster said:
Are you talking about e405? Or you want a recovery modded to support the partition table in stock rom?
I think I can but I need more specs of the partitioning you use for the sd. I need the specific "/dev/block/mmcblk***" of the partitions in the sd. Nothing more (and a little bit of time obviously!).
Click to expand...
Click to collapse
it's for stock rom in E400 (E400 and E405 shared the same partitioning system though).
it's the same partition structure created by CWM recovery :
swap -> /dev/block/mmcblk1p1
ext4 -> /dev/block/mmcblk1p2 -> mounted as /data
vfat -> /dev/block/mmcblk1p3
thanks again for your effort
andwie said:
it's for stock rom in E400 (E400 and E405 shared the same partitioning system though).
it's the same partition structure created by CWM recovery :
swap -> /dev/block/mmcblk1p1
ext4 -> /dev/block/mmcblk1p2 -> mounted as /data
vfat -> /dev/block/mmcblk1p3
thanks again for your effort
Click to expand...
Click to collapse
Here it is, to flash it use my script replacing the recovery.img with the one attached and report if it works or not.
Btw, are you sure that the "/data" partition is ext4? Because if it's wrong the recovery doesn't mount it.
Very sorry for the very late reply, I just had the time to test your new recovery (I had to create flashable zip for it since the script didn't work) and it work perfectly.
Now we have alternative to increase data partition without having to edit apps like gellmar's StockMergE400, means it will be compatible with all stock-based rom :victory:
Thanks again @Cobmaster :good:
Don't worry about it. It's very pleasing to see that it works.
hi!
@Cobmaster, could you make recovery for E405?
after make SDMerge MOD from '' lgl3e405.blogspot.com/2013/05/sd-merge-mod-for-e405-under-testing.html''. i can't restore my backup and i can't mount internal sd.
can you help me. Sorry for my english. i am not good
dricoarmani said:
hi!
@Cobmaster, could you make recovery for E405?
after make SDMerge MOD from '' lgl3e405.blogspot.com/2013/05/sd-merge-mod-for-e405-under-testing.html''. i can't restore my backup and i can't mount internal sd.
can you help me. Sorry for my english. i am not good
Click to expand...
Click to collapse
Could you give me the link of the recovery for e405?
and if you can give me the partition layout of your phone using this: https://play.google.com/store/apps/details?id=com.cls.partition
Or this:
https://play.google.com/store/apps/details?id=me.kuder.diskinfo
Cobmaster said:
Could you give me the link of the recovery for e405?
and if you can give me the partition layout of your phone using this: https://play.google.com/store/apps/details?id=com.cls.partition
Or this:
https://play.google.com/store/apps/details?id=me.kuder.diskinfo
Click to expand...
Click to collapse
How about L5 E455 users? what do you think would happen if i try this recovery on e455?
will it brick it for good ?
-Rant
most of my previous droid phones were SE and then Sony and i never had to deal with any of this
int mem/int sd/ext sd crap. just int mem and sdcard .period
now i've two Chinese tablets and a sammy and now this e455 cuz i needed an affordable dual sim.
man, it's a clusterF. most my backups wont work cuz they've restored on the wrong partition and
yesterday i got some error message like "this dosnt work on emulated storage" and i was like wtf?
/Rant off
Axims said:
How about L5 E455 users? what do you think would happen if i try this recovery on e455?
will it brick it for good ?
-Rant
most of my previous droid phones were SE and then Sony and i never had to deal with any of this
int mem/int sd/ext sd crap. just int mem and sdcard .period
now i've two Chinese tablets and a sammy and now this e455 cuz i needed an affordable dual sim.
man, it's a clusterF. most my backups wont work cuz they've restored on the wrong partition and
yesterday i got some error message like "this dosnt work on emulated storage" and i was like wtf?
/Rant off
Click to expand...
Click to collapse
It will probably get bricked. It's a matter of kernel...
Sent from my LG-E400 using xda premium
Cobmaster said:
It will probably get bricked. It's a matter of kernel...
Sent from my LG-E400 using xda premium
Click to expand...
Click to collapse
hi all,
i have a problem with sdmerge roms. when i install a rom with sdmerge wipe doesn't work.
in cwm i see wipe done succesfully, but nothing happens, and when i reboot i have the same background, same apps etc...
with this update i could fix the problem?
lomax84 said:
hi all,
i have a problem with sdmerge roms. when i install a rom with sdmerge wipe doesn't work.
in cwm i see wipe done succesfully, but nothing happens, and when i reboot i have the same background, same apps etc...
with this update i could fix the problem?
Click to expand...
Click to collapse
only use gellmar recovery, because it is fixed for sdmerge
kien_vip said:
only use gellmar recovery, because it is fixed for sdmerge
Click to expand...
Click to collapse
Where can i find gellmar recovery?
Do you mean step1?
Inviato dal mio LG-E400 con Tapatalk 2
lomax84 said:
Where can i find gellmar recovery?
Do you mean step1?
Inviato dal mio LG-E400 con Tapatalk 2
Click to expand...
Click to collapse
it contain in step 2 or you can see it on some sdmerge rom
im on a roll tonight haha,
next up for release is my custom build of TWRP 3.0.0 recovery this is the latest version of the highly popular TWRP custom recovery.
a
this recovery is fully working as far as i can tell except that it takes a short time to boot so be patient, once booted it is fine,
this recovery also has F2FS support to go with my new custom release
3 Ways to install now, odin image, standard flashable zip (should work from older TWRP) and a basic img file that can be flashed via terminal or TWRP
download links:
changelog
Code:
Fixed MTP
Fixed display brightness
thanks to hennymcc for the help and his device trees that i have modified a little
instructions for converting data to F2FS without losing data(hopefully)
requirements:
microsd card
1. boot into TWRP
2. select the backup options
3. choose your external microsd card using the choose storage button
4. make sure data is selected and start backup
5. once backup is complete, go to wipe and then advanced wipe, select data and click repair or change filesystem and then change file system
6. select f2fs and follow instructions until format is done,
7. restore the backup of data you just made
8. be sure to flash my DMPKern in odin before attempting to boot after f2fs conversion
any suggestions or comments feel free to ask and any donations however small would be greatly appreciated also
XDA:DevDB Information
TWRP3 For G800F, Tool/Utility for the Samsung Galaxy S5 Mini
Contributors
DJ_Steve
Version Information
Status: Beta
Current Beta Version: 1.1
Beta Release Date: 2016-02-14
Created 2016-02-12
Last Updated 2016-11-20
I'm trying to flash it via twrp 2.8.1.0 but without success
Gesendet von meinem SM-G800F mit Tapatalk
no_means_no said:
I'm trying to flash it via twrp 2.8.1.0 but without success
Gesendet von meinem SM-G800F mit Tapatalk
Click to expand...
Click to collapse
its not a zip you can flash its an odin tar.md5 thats been zipped - extract it then use odin to flash
DJ_Steve said:
its not a zip you can flash its an odin tar.md5 thats been zipped - extract it then use odin to flash
Click to expand...
Click to collapse
Excuse my stupidity. I just saw a zip file and thought I might flash it via twrp. now I flashed via odin with success. But the new twrp crashes on backup.
Hasnt crashed once on me what error did it show
Sent from my SM-G800F using Tapatalk
DJ_Steve said:
Hasnt crashed once on me what error did it show
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
sorry, no error. It just freezes pretty early, once at 5%, once at 2%
It would be great if we have it for the g800h as jackeagle build of twrp can't flash aroma zip :v
no_means_no said:
sorry, no error. It just freezes pretty early, once at 5%, once at 2%
Click to expand...
Click to collapse
I think i know why that is will fix and upload today
Sent from my AOSP on Grouper using Tapatalk
sasukesama said:
It would be great if we have it for the g800h as jackeagle build of twrp can't flash aroma zip :v
Click to expand...
Click to collapse
Would love to build for g800h ill have a looksie later
Sent from my AOSP on Grouper using Tapatalk
DJ_Steve said:
I think i know why that is will fix and upload today
Sent from my AOSP on Grouper using Tapatalk
Click to expand...
Click to collapse
good to hear that. just let me know whenever you reuploaded
Very buggy with me.. :/
Back to TWRP v2.8.7.0
Will the internal storage be formated as well or only the data partition (apps and their data only) ?
internal storage will format as its stored on /data aswell
DJ_Steve said:
I think i know why that is will fix and upload today
Sent from my AOSP on Grouper using Tapatalk
Click to expand...
Click to collapse
Did you already upload a new version after the first one freezing while doing backups?
Gesendet von meinem SM-G800F mit Tapatalk
no_means_no said:
good to hear that. just let me know whenever you reuploaded
Click to expand...
Click to collapse
just updated link in main page
I can't make a backup to internal storage or external SDcard.
Error: Failed to mount '/system' (Permission denied)
hmmm interesting ok ill look into that as im not sure why its failing that one
tapptapp said:
I can't make a backup to internal storage or external SDcard.
Error: Failed to mount '/system' (Permission denied)
Click to expand...
Click to collapse
I get the same error as well. At least this version of TWRP can SEE my 64 GB microSD. 2.8.7.0 couldn't see it.
I haven't tried this yet,but I certainly will at some point. I just wanted to say thanks for all your work on this device.It is really appreciated!
ive disabled to download for now until i fix the issue.
Hi guys
if anyone is interested in testing out this boot image i created for my c636b172
removes all encrypt, perfect mounting options for all partitions (this took a while to figure since some caused bootloops)
also reduced voltages for wifi module (may be unstable, if anyone has problems let me know i can try and adjust, otherwise if im not getting problems ill just keep decreasing it)
how to install
1. make sure twp is installed
2. in data/dalvik-cache delete arm and arm64 folders.
3. boot into twrp > wipe cache and dalvik
4. flash the boot image in twrp (flash image select image flash to boot)
5. if you had su installed, flash the zip again
6. go to wipe cache and dalvik again (just in case)
7. reboot and enjoy, theoretically should be slightly faster, and less overhead.
Download
https://www.dropbox.com/s/msda9a3smy9lqb4/modBootv2.img?dl=0
if anyone has a request for their specific boot image let me know and ill add the same values.
Thank you for your work. Is this only for C636 devices or would this work on any device.
Could your reassemble it to add features like DT2W (doubletap to wake)?
audioralf said:
Thank you for your work. Is this only for C636 devices or would this work on any device.
Could your reassemble it to add features like DT2W (doubletap to wake)?
Click to expand...
Click to collapse
i think DT2W is disabled, no flags of it in the boot image, you can try this guide.
https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
the boot image is for the c636, im not sure if you can flash it on another base you can try just have a stock boot.img handy
or to be safe you can send me your boot.img and ill edit it the same.
Thank you for your friendly offer!
I am back on C432B156 with supersu modified boot. The original boot img linked here
https://forum.xda-developers.com/mate-9/development/stock-boot-img-library-t3573312
Mine is https://mega.nz/#!EABCVJwb!wopFOGqJzbpIX6edxM5Y9IVeZAIJ_CAJYUn3q4cc074
I recognized that I have no adb access in TWRP 3.02.2
I can not mount my pc connection. Would this be fixed?
Gesendet von meinem MHA-L29 mit Tapatalk
audioralf said:
Thank you for your friendly offer!
I am back on C432B156 with supersu modified boot. The original boot img linked here
https://forum.xda-developers.com/mate-9/development/stock-boot-img-library-t3573312
Mine is https://mega.nz/#!EABCVJwb!wopFOGqJzbpIX6edxM5Y9IVeZAIJ_CAJYUn3q4cc074
I recognized that I have no adb access in TWRP 3.02.2
I can not mount my pc connection. Would this be fixed?
Gesendet von meinem MHA-L29 mit Tapatalk
Click to expand...
Click to collapse
no, twrp 3022 doesnt have MTP access right now.
Thank you for the info.
Which advantage is on daily usage. I guess I would have to install supersu again, for it modifies the boot.
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Mount does work in 3.1.0. Though you have to tap on "Mount USB Storage", then unmount before it actually mounts..
ante0 said:
Mount does work in 3.1.0. Though you have to tap on "Mount USB Storage", then unmount before it actually mounts..
Click to expand...
Click to collapse
ill try this
always thought it didnt work since it worked fine in 303
Hi Virtyx,
I very appreciate your work, good hope to use,
but i have some not understand the installation in STEP 2 (in data/dalvik-cache delete arm and arm64 folders) what to do?
Hope you can help explain more STEP 2 detail.
I have L29-C636b172 and unlocked Bootloader.
A lot of Thanks.
xjeepnsk said:
Hi Virtyx,
I very appreciate your work, good hope to use,
but i have some not understand the installation in STEP 2 (in data/dalvik-cache delete arm and arm64 folders) what to do?
Hope you can help explain more STEP 2 detail.
I have L29-C636b172 and unlocked Bootloader.
A lot of Thanks.
Click to expand...
Click to collapse
Using a file Explorer with root support, navigate to /data/dalvik-cache and remove those 2 folders. Alternatively use a terminal app and 'rm -rf /data/dalvik-cache/arm*'.
I guess you could use the file manager or terminal in twrp.
ante0 said:
Using a file Explorer with root support, navigate to /data/dalvik-cache and remove those 2 folders. Alternatively use a terminal app and 'rm -rf /data/dalvik-cache/arm*'.
I guess you could use the file manager or terminal in twrp.
Click to expand...
Click to collapse
Hi ante0,
I succeeded, Thank you so much
Hello sir,
My mate 9 stuck in boot loop....
And I can't access to recovery too
Can u make scatter file for mate 9 to fix boot loop
How to go from OOS 5.0 to Stock Nouga
Since you've made the spelling error twice, its Nougat, not "Nouga.".
I think the best way you could do it is flash the special Open Beta build on the Open Beta thread and then flash the stable build zip.
Whichever way you do the reversion, you will lose partial data, as N and O do not support each others app installations.
Z.boy said:
How to go from OOS 5.0 to Stock Nougat
Click to expand...
Click to collapse
If you are unlocked bootloader, flash twrp 3.1.1-2 and clear dalvik data cache and system, and just flash them through twrp
dont use twrp 3.2.0-0 because you cant install magisk, it shows installed but magisk doesnt seem to be recognized in apps
I've just done that, and everything seems working flawlessly
Pls do hit thanks if i help you
izukamikain said:
If you are unlocked bootloader, flash twrp 3.1.1-2 and clear dalvik data cache and system, and just flash them through twrp
dont use twrp 3.2.0-0 because you cant install magisk, it shows installed but magisk doesnt seem to be recognized in apps
I've just done that, and everything seems working flawlessly
Pls do hit thanks if i help you
Click to expand...
Click to collapse
Does your solution avoid erasing internal storage? Because that's the part that's preventing me as it can take too long getting my backups into the phone again.
rebelpixel said:
Does your solution avoid erasing internal storage? Because that's the part that's preventing me as it can take too long getting my backups into the phone again.
Click to expand...
Click to collapse
i never format my internal sdcard partition
it's taking too long time to backup and restore it again
as i said, only format dalvik cache data and system thru twrp and you're good to go
download special edition nougat revert zip file and flash it via recovery
http://oneplusroms.s3.amazonaws.com...337224&Signature=BEA4IHd/rVFqoPd2gh7EvwaoSeg=
notes :
The build will wipe app and cache data, but Internal Storage will be saved (ie: pictures and files)
Users who revert their device back to the special build can still OTA update the device to Android O build at a later date.
Steps to revert:
Download special build
Copy to Internal storage
Reboot to recovery Mode to install
Choose “Install from Local”
Choose the downloaded build to install
I have rooted Samsung Note 8 NZC version with help of Magisk. After booting again, I found I can't use Samsung Health since the knox or something has tripped so, I uninstalled Magisk and still they detect the device as rooted. Now I'm stuck as I don't have root privileges and also can't use Samsung Health. I read the post to use Samsung Health by using build prop application but that need root and I don't have that anymore. Please help.
...
Sent from my Galaxy Note 8 using XDA Labs
Dejan Sathanas said:
...
Sent from my Galaxy Note 8 using XDA Labs
Click to expand...
Click to collapse
Okay I'll try rooting again
After rooted again use a root explorer like mixplorer, go to root/ system/ build.prop. open that file, search for the line
Code:
ro.config.tima=1
change it to
Code:
ro.config.tima=0
Reboot, and you should be good to go
Gesendet von meinem SM-N950F mit Tapatalk
Logel said:
After rooted again use a root explorer like mixplorer, go to root/ system/ build.prop. open that file, search for the line
Code:
ro.config.tima=1
change it to
Code:
ro.config.tima=0
Reboot, and you should be good to go
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
Thank given, I will try rooting again and post what happens.
Recovery Mode
I can reboot to recovery without ODin as I rooted before so should I just go to recovery and install magisk from files without wiping device or not? Or I should use recommended method here? I am confused help me out.
If you only uninstalled magisk, but you still have custom binaries (twrp) you can simple flash magisk.zip again and your device is rooted again.
Gesendet von meinem SM-N950F mit Tapatalk
Logel said:
If you only uninstalled magisk, but you still have custom binaries (twrp) you can simple flash magisk.zip again and your device is rooted again.
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
But do I need to wipe device? Or just copy magisk.zip to device and reboot into recovery and flash with read only installation mode in recovery?
No need to wipe anything.
Reboot to twrp and flash that stuff. I always use the modify option - not read only.
I don't want to read, i will modify my system [emoji39]
You do all at your own risk! But that's the way i do it always
Gesendet von meinem SM-N950F mit Tapatalk
Logel said:
No need to wipe anything.
Reboot to twrp and flash that stuff. I always use the modify option - not read only.
I don't want to read, i will modify my system [emoji39]
You do all at your own risk! But that's the way i do it always
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
I am trying to reboot to recovery after copying magisk and other 3 files on internal storage, but it doesn't show the zip file that I just copied??
nimitmama said:
I am trying to reboot to recovery after copying magisk and other 3 files on internal storage, but it doesn't show the zip file that I just copied??
Click to expand...
Click to collapse
What zip files you talking about?
Logel said:
What zip files you talking about?
Click to expand...
Click to collapse
3 zip files are magisk.zip, n950 root for oem issue devices, rmm state bypass. I copied them in internal memory and when i reboot to twrp they are not present there. I think i will just be needing to flash magisk but i cant see it in twrp.
nimitmama said:
3 zip files are magisk.zip, n950 root for oem issue devices, rmm state bypass. I copied them in internal memory and when i reboot to twrp they are not present there. I think i will just be needing to flash magisk but i cant see it in twrp.
Click to expand...
Click to collapse
Please help, I cant see magisk and oem issue zips in my twrp recovery. I am going through directories but still cant find it. Do I need to wipe the phone again then copy the zip files?
They should be in Magisk Manager folder, not Download folder - if downloaded via Magisk.
leicablue said:
They should be in Magisk Manager folder, not Download folder - if downloaded via Magisk.
Click to expand...
Click to collapse
Thanks to al for help. Finally I had to wipe again and root from beginning from TWRP and everything is working fine.