I had a pioneer deh-x6700bt stereo installed recently that has Bluetooth and hands free wired mic that clips behind the rear view mirror. My son in law did the install for me and he works and mods all kinds of cars so I don't think it was the install itself.
Everything works except when I make a call people don't hear me speak and have to grab my phone and turn on the speaker on the phone to use. It pairs with Bluetooth fine using my music via my phone's sd card and pandora etc.
I sent pioneer and email and they sent me a new mic to install, but had the same issue. The phone I'm using is an AT&T S5 on rooted 4.4.4
Wondering if anyone else has had issues with pioneer systems and found a fix.
Ha, Ha 45 views and nuttin? I figured someone would have something to say on the subject.
Tomorrow I will have some time to play around with it and use my wife's unrooted S5. Also borrow other phones to see if they work.
I have a feeling it's a setting within the radio itself (I hope). I'm not ripping it out if I can't get it to work. It is what it is.
The only thing i can think of is you do not have the phone paired proper you should see 2 profiles in your Bluetooth one with a headphone next to it and ine with a telephone reciver next to it for the same unit
Sent from my SAMSUNG-SM-G900A using Tapatalk
Thanks for the reply rurigokou. I actually do have the two profiles synced.
I tried everything and have come to the conclusion it is a problem with the head unit itself. I called best buy and the manager was very gracious and is going to have a tech do some diagnostics on the unit for me.
If they find a problem I'm guessing they will switch out the unit, since that is where I purchased it. I have studded tires on the front of the car and have to grab others for me to take it in (here in Oregon the tires need to be changed early this year cause of the good weather , March 30).
Thanks for the reply rurigokou.
I have exact same issue
Gonna try new mic
TPMS has beenn mentioned a few times in the original thread, but AFAIK no one has managed to find out how/if any TPMS modules will work. I bought a TPMS module from Klyde, it comes with 4 valve caps and a strange mini USB thing that I assume allows you to plug another mini USB device into the unit at the same time.
Unfortunately I cant get it to work with the built in TPMS app that started appearing in ROMs from June either on my old unit or my new one, I ve tried searching for the device in the BT app and the BT in settings but I get nothing, I m awaiting a response from Klyde.
If anyone has any ideas on how to get it to work then let me know, but its good to see TPMS hardware available for these devices - even if its not working . . yet !
Can you share link from TPMS module?
My brain is stuck what is TPMS? I am sure I should know but i don't get it
Guess youre talking about Tire Pressure Metering Sensor?
would you probably add a hint to your OP and title so others know what you mean? Remeber the non-english-speakers here
Yes this is it (Tire Pressure Metering Sensor).
dark alex said:
My brain is stuck what is TPMS? I am sure I should know but i don't get it
Guess youre talking about Tire Pressure Metering Sensor?
would you probably add a hint to your OP and title so others know what you mean? Remeber the non-english-speakers here
Click to expand...
Click to collapse
Yes, its Tyre Pressure Monitoring System, sorry @dark alex.
Billkaza said:
Can you share link from TPMS module?
Click to expand...
Click to collapse
I simply bought it from Klyde, there was no link, I guess you have to ask them.
It turns out it cant be used with DAB, which is why I cant get it to work - the cable to attach it is the same as the DAB module they sent me.
I m not sure if its BT or maybe NFC or something. I ll report back with results when I get it to to work
Does anybody try this TPMS solution with his HU?
http://www.aliexpress.com/item/Smar...77_80_61,searchweb201644_5,searchweb201560_10
Does the app work in landscape mode?
Can the app start with background mode?
Does the external (valve cap) sensor show accurate value?
I have been using this TPMS system in Volkswagen Polo and my MTCB head unit since 3 months now and couldn't be happier with it.
It activates when you press the button because it invokes the reverse camera display source every time you call it into action.
http://www.aliexpress.com/item/Stee...1644_2_79_78_77_82_80_62_81,searchweb201560_6
I have tried these two models purchased at Amazon and they work perfectly. I have them installed on my cars.
The only drawback is that you need Bluetooth 4.0 and HuiFei radio does not have it. I have commissioned an RX USB Bluetooth for Android on Deal Extreme, to see if it works.
So far I'm seeing it in my S5 Galaxy.
All the links:
http://www.amazon.es/Sensores-Inter...2?ie=UTF8&qid=1448974215&sr=8-2&keywords=tpms
http://www.amazon.es/Sistema-Sensor...?ie=UTF8&qid=1448974381&sr=8-67&keywords=tpms
http://www.dx.com/es/p/v40-usb-2-0-...s-android-os-black-silver-250228#.VoqxKORgnDc
http://android.myapp.com/myapp/detail.htm?apkName=com.eckom.tpms
Turns out you need a special lead that I wasnt sent orignally, it plugs into one of the sockets on the back of the unit, theyre sending me one, I ll post again when I get it.
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
dviperbigt said:
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
Click to expand...
Click to collapse
Dont know, ask the seller.
But in any case if it works with a Joyous unit it will work with ANY MTCB head unit. There is no such thing as a "Joying" head unit - Joying/CarJoying are simply re-sellers of Shenzhen Joyous head units.
dviperbigt said:
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
Click to expand...
Click to collapse
Yes I think.
It looks made specifically for these HUs. So I supposed they tested them.
And screens look like built-in TPMS app that I got preinstaled on my HU (KGL). So I supposed it should work.
But I would preffer ecternal sensors, not ibternal ones. I have 4x4 which reqiires regular tire rotation and ibternal sensors are not suitable as I would need to remove and refit them on every tire rotation.
Is there external versio? I couldnt find it on AlliExpress.
The one I mentioned in my first post has valve mounted sensors and obviously works with MTCB head units
pa.ko said:
Yes I think.
I would need to remove and refit them on every tire rotation.
Click to expand...
Click to collapse
Why? Sure, if they are somehow hard coded to location its sort of funny when they might not match the picture, but you only have 4 tires. Its pretty easy to check them when they are low.
You want internal sensors for TPMS. Less chance for losing them.
http://www.ebay.com/itm/Cable-Bueto...Tire-Pressure-Monitoring-System-/271315933336
I understand the point about tire rotation and internal sensors. Would it be possible to make the same rotation in the app, since all sensors are doing the same thing anyway? Eg. If you rotate your right front to right rear, make the same in the app to correspond with the sensor location?
Sent from my Mi-4c using xda premium
Yes, mapping is possible. Depends on product.
dviperbigt said:
Anyone have a idea if this would work with a joying head unit.
http://www.aliexpress.com/item/Wire...61,searchweb201560_8,searchweb1451318400_6150
Click to expand...
Click to collapse
Hi All,
I have also interest for this. Somebody could give some information ? It works, or any other bluetooth type, using with external attached bluetooth 4.0 dongle ?
Well, I found out most of the connections for the TPMS as Klyde didnt send me a lead - power and ground were easy same as the DAB box, then, as its just a mini usb connection its just data + and data -, I know where the one of those wires goes, and narrowed it down to 2 pins for the other, I ve tried both pins and several versions of the TPMS app, but cant get anything. I ve tried looking for BT devices on my phone I thought I found 1 but my phone wouldnt connect and the headunit's BT wouldnt see it, my phone wouldnt connect and after removing all the batteries on the TPMS it still showed up so it couldnt be that. Totally stumped, just cant get it to work.
TPMS-Type
Let me inform you that for some time I'm trying to find a TPMS system that works well with Android auto MTCB-C I have made several purchases and placements from various vendors I will mention my experience to help future stakeholders.
For GS, KD, and JY machines, the following set works very well:
https://www.aliexpress.com/item/TPMS-for-SilverStrong-Android-CAR-DVD-Car-Tire-Pressure-Monitoring-System-4-Sensors-Alarm-Tire-Temperature/32803916037.html?spm=2114.13010608.0.0.IU13AC
It has its own very friendly app and it works with automatic start-up in the background and immediately informs if something goes wrong with the tires of the car, I recommend it for the above!
But last time I discovered another type with external valves that works very well with a Klyde machine and that's it:
https://www.aliexpress.com/item/Car-Tire-Pressure-System-TPMS-Only-for-Klyde-Brabd-Car-DVD-Radio-display-the-tempreature-and/32806152062.html?spm=2114.13010308.0.0.pPlup1
OR
https://www.aliexpress.com/item/TPMS-Tyre-Pressure-Monitoring-System-For-Car-Android-DVD-GPS-Radio-Player-Car-Stereo/32808928613.html?spm=2114.13010308.0.0.OJcJUk
I believe I helped my friends.
spirosme said:
Let me inform you that for some time I'm trying to find a TPMS system that works well with Android auto MTCB-C I have made several purchases and placements from various vendors I will mention my experience to help future stakeholders.
For GS, KD, and JY machines, the following set works very well:
https://www.aliexpress.com/item/TPMS-for-SilverStrong-Android-CAR-DVD-Car-Tire-Pressure-Monitoring-System-4-Sensors-Alarm-Tire-Temperature/32803916037.html?spm=2114.13010608.0.0.IU13AC
It has its own very friendly app and it works with automatic start-up in the background and immediately informs if something goes wrong with the tires of the car, I recommend it for the above!
But last time I discovered another type with external valves that works very well with a Klyde machine and that's it:
https://www.aliexpress.com/item/Car-Tire-Pressure-System-TPMS-Only-for-Klyde-Brabd-Car-DVD-Radio-display-the-tempreature-and/32806152062.html?spm=2114.13010308.0.0.pPlup1
OR
https://www.aliexpress.com/item/TPMS-Tyre-Pressure-Monitoring-System-For-Car-Android-DVD-GPS-Radio-Player-Car-Stereo/32808928613.html?spm=2114.13010308.0.0.OJcJUk
I believe I helped my friends.
Click to expand...
Click to collapse
Thanks for your post - I have the Last type, Klyde themselves supplied me with it, but they did not send me the lead and they did not reply to me when I asked for it, so I had to make one, but I still cannot get it to work, could you post a picture of the lead (the end that plugs into the head unit) so I can see which wires go where (I have seen the picture in your 3rd link before, but I cannot see where all the wires go) ?
Hi Peeps
Really sorry if im in the wrong forum and im here to learn but hope someone can point me in teh correct direction
Im in the U.K and we dont seem to be able to buy Joying head units which seem to be popular in the states.
Im looking at Eonon or Xtrons mainly with the quad core processors and 5.1 Lollipop.
Is there anything i should be looking for or best avoided?
Thanks for any help, i really appreciate it.
Should be able to buy joying in UK they have a warehouse there try Amazon or eBay
Sent from my Nexus 7 using Tapatalk
Thanks, Ive done a search on Amazon and ebay for Joying e90 and get no results, ive also been on the carjoying u.k website and they dont even list the e90 as an available option
Buy from joying direct they will ship via dhl quick
Sent from my A0001 using Tapatalk
I have the xtrons e90 unit in my car. Seems similar to joying ect. One thing that took me ages to figure out as no instructions or guidance was given at all, was that there is two 12v yellow power leads and both need to be plugged in. One needs to go direct into the fusebox or to the battery.
Apparently BMW loses constant 12v power after a certain timer, roughly when the alarm system kicks in. So this means all power is lost to the head unit, including the small amount it needs to keep the MCU memory, which is your radio station presets and stuff. Also causing a much longer boot up. So I had to wire one of the cables into the central locking system fuse. Dead easy but you do need to buy a few bits from amazon for a few quid, otherwise the unit is a ballache.
Hope that helps
Cheers peeps, great advice. I've found auto pumpkin UK now so may order from them. The Xtrons , eonon and pumpkin all look identical so not sure if there is a difference as all seem to come from the same factory?
Should I be looking for the quad core 5.1 versions ?
Cheers all and thanks for the advise.
P.S I'll try and find the central locking fuse and use an add a circuit fuse to it.
Damit17 said:
Buy from joying direct they will ship via dhl quick
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks, I really want to avoid a big hit on import tax to the UK and have somewhere in the uk in case of return
But would joying not show it as a UK sale as they havea warehouse there
Sent from my Nexus 7 using Tapatalk
I have just installed Erisin 3067B purchased directly from their website. It's a MTCD-based head unit. So far it is worth the price, although I had to struggle a bit to get everything working. In particular:
- The manual is almost useless. Moreover there are no installation details
- The head unit is very big and it is needed to move the AC controls in the lower part of the dashboard. I do not see how it is possible to add also the seats heating controls (I don't have them in my E91)
- Cable routing is easy. There are some videos on youtube regarding installation of Zenec car units. It took me 1h to get everything set
These are the problems I encountered:
- Quality of microphone, especially the external one, is very bad.
- The radio presets are lost every time I turn off the radio. No other settings are, therefore I guess it is software bug.
- exFAT is not recognized. So far I tried with a 64GB SDXC card and I only managed to read it when formatted as FAT32.
Andrea69 said:
I have just installed Erisin 3067B purchased directly from their website. It's a MTCD-based head unit. So far it is worth the price, although I had to struggle a bit to get everything working. In particular:
- The manual is almost useless. Moreover there are no installation details
- The head unit is very big and it is needed to move the AC controls in the lower part of the dashboard. I do not see how it is possible to add also the seats heating controls (I don't have them in my E91)
- Cable routing is easy. There are some videos on youtube regarding installation of Zenec car units. It took me 1h to get everything set
These are the problems I encountered:
- Quality of microphone, especially the external one, is very bad.
- The radio presets are lost every time I turn off the radio. No other settings are, therefore I guess it is software bug.
- exFAT is not recognized. So far I tried with a 64GB SDXC card and I only managed to read it when formatted as FAT32.
Click to expand...
Click to collapse
Regards to radio presets read what I put above.
Dec64 said:
I have the xtrons e90 unit in my car. Seems similar to joying ect. One thing that took me ages to figure out as no instructions or guidance was given at all, was that there is two 12v yellow power leads and both need to be plugged in. One needs to go direct into the fusebox or to the battery.
Apparently BMW loses constant 12v power after a certain timer, roughly when the alarm system kicks in. So this means all power is lost to the head unit, including the small amount it needs to keep the MCU memory, which is your radio station presets and stuff. Also causing a much longer boot up. So I had to wire one of the cables into the central locking system fuse. Dead easy but you do need to buy a few bits from amazon for a few quid, otherwise the unit is a ballache.
Hope that helps
Click to expand...
Click to collapse
Dec64 said:
Regards to radio presets read what I put above.
Click to expand...
Click to collapse
Thanks a lot!
There are several empty positions in the fusebox. Do you suggest to wire the BATT+ wire directly or to install it with a 10A fuse?
Andrea69 said:
Thanks a lot!
There are several empty positions in the fusebox. Do you suggest to wire the BATT+ wire directly or to install it with a 10A fuse?
Click to expand...
Click to collapse
you could do either apparently.
Personally i just purchased these, https://www.amazon.co.uk/gp/product/B01E3PQWUE/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
and used one of them in the fuse for the central locking system, as it will always have 12v. Was really simple, tad fidly running the wire that's all.
Andrea69 said:
I have just installed Erisin 3067B purchased directly from their website. It's a MTCD-based head unit. So far it is worth the price, although I had to struggle a bit to get everything working. In particular:
- The manual is almost useless. Moreover there are no installation details
- The head unit is very big and it is needed to move the AC controls in the lower part of the dashboard. I do not see how it is possible to add also the seats heating controls (I don't have them in my E91)
- Cable routing is easy. There are some videos on youtube regarding installation of Zenec car units. It took me 1h to get everything set
These are the problems I encountered:
- Quality of microphone, especially the external one, is very bad.
- The radio presets are lost every time I turn off the radio. No other settings are, therefore I guess it is software bug.
- exFAT is not recognized. So far I tried with a 64GB SDXC card and I only managed to read it when formatted as FAT32.
Click to expand...
Click to collapse
I am having similar problems myself.
-BMW i-BUS it doesn't detect it at all. I need the CAN file for the unit, but no luck as of yet.
-Home button on the unit doesn't work anymore? Factory restore fix's but it stops again after 2 days!
-Most of the settings are locked from view. I access developer mode and it auto kicks me back to bluetooth phone menu.
- Front camera displays track and theres no option to remove it. So annoying!!
- LED colour APP has gone. This went after I did a MCU upgrade which I was given by seller.
- When I power up Clicker is always set to on. Front camera always resets to normal instead of saving mirroring. Other various settings are forgotten as are radio presets.
- Doesn't detect iPhone via USB only Bluetooth. But does charge... Slowly.
You had any luck with yours? I have a E90.
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
maxxoutput said:
Hi Peeps
Really sorry if im in the wrong forum and im here to learn but hope someone can point me in teh correct direction
Im in the U.K and we dont seem to be able to buy Joying head units which seem to be popular in the states.
Im looking at Eonon or Xtrons mainly with the quad core processors and 5.1 Lollipop.
Is there anything i should be looking for or best avoided?
Thanks for any help, i really appreciate it.
Click to expand...
Click to collapse
How you getting on with this? I'm having problems with my e90.
Jay_brown47 said:
I am having similar problems myself.
-BMW i-BUS it doesn't detect it at all. I need the CAN file for the unit, but no luck as of yet.
-Home button on the unit doesn't work anymore? Factory restore fix's but it stops again after 2 days!
-Most of the settings are locked from view. I access developer mode and it auto kicks me back to bluetooth phone menu.
- Front camera displays track and theres no option to remove it. So annoying!!
- LED colour APP has gone. This went after I did a MCU upgrade which I was given by seller.
- When I power up Clicker is always set to on. Front camera always resets to normal instead of saving mirroring. Other various settings are forgotten as are radio presets.
- Doesn't detect iPhone via USB only Bluetooth. But does charge... Slowly.
You had any luck with yours? I have a E90.
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
How you getting on with this? I'm having problems with my e90.
Click to expand...
Click to collapse
Hi. Try from AliExpress. Dhl or tnt etc 5 days is here. Yellow cable must ti be connected for the settings memory.
Hi, I've recently bought a used car and installed a Xtrons PE98MTVPL on it.
Now I have discovered that the used car has TPMS sensors installed on the wheels. What would I need in order try and see if these work with the head unit? Do you need some additional hardware or can I pair the sensors with the head unit as default?
Best regards
David
You need an add-on USB device for TPMS like this: https://www.ebay.com.au/itm/USB-Car...ystem-with-4-External-Sensors-AU/263958460650
First thing you need to know is that there are two main frequencies used, so you would need to match the unit you buy to the frequency used on your wheels. Also I have no idea about compatibility across manufacturers sorry.
Hello everyone, I installed a Seicane kit for my volvo xc60 t6 2009, but when I put reverse I receive the image from the camera, but when I remove the park button I lose the image from the camera. I thought that searching the list of the canbus system for the Volvo brand could correct the problem, but the canbus list does not have the Volvo brand. could someone tell me what to do?
The camera is installed by cable and connected to the reverse light line.