[ROM][UNOFFICIAL][7.1.2] AICP 12.1 for Redmi 4A [OMS] - Xiaomi Redmi 4a ROMs, Kernels, Recoveries, & Other

[ROM][UNOFFICIAL][7.1.2] AICP 12.1 for Redmi 4A [OMS] - Xiaomi Redmi 4a ROMs, Kernels, Recoveries, & Other

The ROM should contain everything you need to enjoy Android Nougat. You don't need to install any Add-Ons, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:(Again: Don't do it if you don't know it!)
1. Download the NOUGAT FIRMWARE ,ROM and GApps and transfer them to your device
2. Boot to recovery (TWRP recommended)
3. Wipe system, Cache, data and ART/Dalvik cache
4. Flash Nougat firmware Zipfile
5. Flash the Rom zipfile
6. Flash/Install GApps (optional, needed for e.g. Google Playstore to work)
7. Flash/Install the root solution of choice (optional)
8. Reboot to system
Supported root solutions:Magisk v13.x
SuperSU - stable and beta available (Site by CCMT that took over the the marketing from chainfire)
SuperSU - direct download link for the latest SuperSU directly from the dev (chainfire)
Lineage SU-addon (check your needed version: 14.1 arm or arm64) -> the removal zip is available here too.
If you want to contribute to the AICP or wanna see what is being worked on/merged, feel free to visit our Gerrit review system. (Link is at the bottom!!!)
ROM & Additional links:
Gerrit Code Review
Github
IceColdJelly AICP G+ community
ROM OS Version: 7.1.x Nougat
ROM Kernel: Linux 3.18.xx
ROM Firmware Required: Unlocked bootloader, MIUI 9
Version Information
Status: Stable
You want to see a normal night at the "DEV office", click here!!
XDA:DevDB Information
AICP 12.1, ROM for the Xiaomi Redmi 4A
Contributors
Nik001, muralivijay, ataberkozen for using their vendor/device source and for all who helped me to build this Rom.
Source Code: https://github.com/AICP
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: MIUI 9
Based On: LineageOS
Version Information
Status: UNOFFICIAL
Created 2017-12-24
Last Updated 2017-12-24

Mate, the rom is perfect 0 bugs for now, even the tethering works, but I faced a bit of lag, and I saw the zram was set over 900mb (1800 or so), the swappiness at 0 (so if im not wrong it will not swap to the zram, and therefore the zram has no sense), and the cache pressure was a bit low.
I putted this values with kernel adiutor and now is smooth:
Zram 970mb
Swapiness 60
Vfs cache pressure 80
Hope it helps
Enviado desde mi Redmi 4A mediante Tapatalk
---------- Post added at 01:47 AM ---------- Previous post was at 01:33 AM ----------
Oh and also had to flash the nougat firmware fix, because the backlight on bug appeared
Enviado desde mi Redmi 4A mediante Tapatalk

kentone said:
Mate, the rom is perfect 0 bugs for now, even the tethering works, but I faced a bit of lag, and I saw the zram was set over 900mb (1800 or so), the swappiness at 0 (so if im not wrong it will not swap to the zram, and therefore the zram has no sense), and the cache pressure was a bit low.
I putted this values with kernel adiutor and now is smooth:
Zram 970mb
Swapiness 60
Vfs cache pressure 80
Hope it helps
Enviado desde mi Redmi 4A mediante Tapatalk
---------- Post added at 01:47 AM ---------- Previous post was at 01:33 AM ----------
Oh and also had to flash the nougat firmware fix, because the backlight on bug appeared
Enviado desde mi Redmi 4A mediante Tapatalk
Click to expand...
Click to collapse
What do mean by the backlight bug? you mean when you turn off the screen it only goes black but doesn't turn off?
if that what you mean, please provide me with a link for the fix to the problem mentioned, thanks.

Wizardviper55 said:
What do mean by the backlight bug? you mean when you turn off the screen it only goes black but doesn't turn off?
if that what you mean, please provide me with a link for the fix to the problem mentioned, thanks.
Click to expand...
Click to collapse
On this another rom, theres a link for the Nougat firmware needed to the screen work:
https://forum.xda-developers.com/redmi-4a/development/official-dotos-v1-1-t3716819
Hope it helps mate, im using the rom for 3 days and is perfect I think

kentone said:
On this another rom, theres a link for the Nougat firmware needed to the screen work:
https://forum.xda-developers.com/redmi-4a/development/official-dotos-v1-1-t3716819
Hope it helps mate, im using the rom for 3 days and is perfect I think
Click to expand...
Click to collapse
Thank you for the fast reply, but i didn't find the file you mention, only the dotOS rom and the gapps link, nothing else.

Wizardviper55 said:
Thank you for the fast reply, but i didn't find the file you mention, only the dotOS rom and the gapps link, nothing else.
Click to expand...
Click to collapse
Second post, between DOESN'T and Telegram Group, you didn't read enough!
Enviado desde mi Redmi 4A mediante Tapatalk

kentone said:
Second post, between DOESN'T and Telegram Group, you didn't read enough!
Enviado desde mi Redmi 4A mediante Tapatalk
Click to expand...
Click to collapse
My bad thank you again.

kentone said:
Mate, the rom is perfect 0 bugs for now, even the tethering works, but I faced a bit of lag, and I saw the zram was set over 900mb (1800 or so), the swappiness at 0 (so if im not wrong it will not swap to the zram, and therefore the zram has no sense), and the cache pressure was a bit low.
I putted this values with kernel adiutor and now is smooth:
Zram 970mb
Swapiness 60
Vfs cache pressure 80
Hope it helps
Enviado desde mi Redmi 4A mediante Tapatalk
---------- Post added at 01:47 AM ---------- Previous post was at 01:33 AM ----------
Oh and also had to flash the nougat firmware fix, because the backlight on bug appeared
Enviado desde mi Redmi 4A mediante Tapatalk
Click to expand...
Click to collapse
Install terminal emulator and type "free -m " show me output value

Wizardviper55 said:
What do mean by the backlight bug? you mean when you turn off the screen it only goes black but doesn't turn off?
if that what you mean, please provide me with a link for the fix to the problem mentioned, thanks.
Click to expand...
Click to collapse
Flash. Nougat firnware

Thread closed - Breaching XDA Rules (Rule 13)

Related

[ROM][UNOFFICIAL][8.1.0] AICP - 13.1 - Oreo for MI 5S [OMS]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LAOS) we are now LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
@vache and @dreamstar for the amazing work on athene
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 13.1
Unofficial download link: AICP 13.1 builds
Full Changelog link: No changelog for now
Google Apps: Unofficial opengapps
FAQ:]
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet available for Oreo.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Go to Aicp Extras/Navigation bar, and enable it.
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I keep losing root with Magisk, how do I fix it?
A. Check this out. If that doesn't work for you, ask for help in this thread, read or ask in the Magisk thread on XDA or just re-flash Magisk!
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the root section in the AICP Extras menu.
The ROM should contain everything you need to enjoy Android Oreo. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update) as long as the instructions of your
root solution do not state something else (="persistence on dirty flashing") !
Currently Supported Root Solutions:
Latest magisk
KERNEL:
The kernel in this ROM follows LineageOS source with custom additions. (made by @brigio345)
PREREQUISITE FOR OTA:
To be able to flash using the built-in OTA app, TWRP recovery is needed.
You can still use the LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. The Zipfile gets saved in the "aicp_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
kernel_xiaomi_msm8996
ROM & Additional links:
AICP Gerrit Code Review
AICP on Github
AICP G+ community
Contributors:
@MZO

Download
06/22
Download link: AICP

Do this rom support f2fs?

new rom is up!
check 2nd post

jpg3927 said:
new rom is up!
check 2nd post
Click to expand...
Click to collapse
Our hero is back

New AICP Uploaded with oreo 8.1 and 3.18.95 kernel!
check op's download link!

Thank you so much man! You are restless
Which is the smoothest ROM in your experience?

jpg3927 said:
New AICP Uploaded with oreo 8.1 and 3.18.95 kernel!
check op's download link!
Click to expand...
Click to collapse
I'm not trying to be rude or be such ungratefull for your hardwork releasing various custom ROM, do you have a plan to release a CAF based ROM? Anyway, thanks for your consistent work to longetivity of this device.

Hi, dev, sorry to disturb,I don't know if there is some problem with quick pulldown. In my case(clean install with gapps and Magisk), quick pulldown is broken with smart pulldown turn off.
Except this, this is a good ROM, thanks :good:

I was using PixelExperience and everything was fine. After installing this ROM, I can't use TWRP anymore. It won't show me any of my files, it's like the phone is totally empty, but the system boots up fine, with everything working.
After installing the ROM I also wasn't able to install Magisk.
Any clue about what I should do?
-----------------
Edit: Ok, I already found in Los15.1 thread what I have to do: Install TWRP 3.2.1-1 through fastboot.
-----------------
Edit 2: It worked! So...
IMPORTANT:
Before installing this ROM, make sure you have installed the latest TWRP 3.2.1-1

Wow..Thank a lot man..This is Very stable Rom may be Overal very very stable Thank u Very much dev..

BajinganTengik said:
I'm not trying to be rude or be such ungratefull for your hardwork releasing various custom ROM, do you have a plan to release a CAF based ROM? Anyway, thanks for your consistent work to longetivity of this device.
Click to expand...
Click to collapse
i already uploaded cosmicos
it based on aosp+caf
sent from Redmi Note 3

jpg3927 said:
i already uploaded cosmicos
it based on aosp+caf
sent from Redmi Note 3
Click to expand...
Click to collapse
Does latest Cosmic OS use @brigio345 kernel?

Led notification not work any idea?

Can you build a user version?Not userdebug.

new rom uploaded with seprated vendor and updated kernel
and i will not use 3.18.95 kernel

No quick charging!
After I flashed the rom, I can't get quick charging!

jpg3927 said:
new rom uploaded with seprated vendor and updated kernel
and i will not use 3.18.95 kernel
Click to expand...
Click to collapse
Separated vendor?...and did that mean...that your aicp is supporting Project Treble?

James Blode said:
Separated vendor?...and did that mean...that your aicp is supporting Project Treble?
Click to expand...
Click to collapse
no same as lineage os
Sent from my MI 5s using Tapatalk

jpg3927 said:
no same as lineage os
Click to expand...
Click to collapse
Thank you dear dev....and thanks for this rom.....i love AICP even more then RR....thanks

[ROM][OFFICIAL] AICP - 14.0 - P 9.0 sagit - WEEKLY

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we are now based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
If there are any bugs, either we will sort them out or the GZOSP team, if it concerns their code base. This ROM isn't GZOSP supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 14.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 28.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure might vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
The root solution can be flashed together with every OTA update (= ROM Update).
Currently supported Root Solution:
Magisk stable
Magisk versions >= 17.2 don't usually require to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time.
Unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
To be able to flash using the built-in OTA app, TWRP recovery is needed.
Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_xiaomi_msm8998
Device tree source:
https://github.com/AICP/device_xiaomi_sagit
Vendor source:
https://github.com/AICP/proprietary_vendor_xiaomi
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
[ROM][OFFICIAL] AICP - 14.0 - P 9.0 sagit - WEEKLY, ROM for the Xiaomi Mi 6
Contributors
Miccia
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI 9.3.7
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 9.0
Stable Release Date: 2019-03-21
Created 2017-12-16
Last Updated 2019-03-21

Frequently asked Questions
Which firmware should i use?
You have to use an firmware older then 8.10.25 but at least 8.4.19. Download the 8.4.19 firmware here: https://basketbuild.com/filedl/devs...agit_miui_MI6Global_8.4.19_49003fef39_8.0.zip
Click to expand...
Click to collapse
Which recovery should i use?
You should use this TWRP: https://androidfilehost.com/?fid=6006931924117891801 because the official one is not up to date with this ROM and can't decrypt your data.
Click to expand...
Click to collapse
The Rom doesn't let me add new fingerprints. What is the reason?
You have to use an firmware older then 9.3.21 but at least 8.4.19 because Xiaomi has updated some pathes for the fingerprint data.
Click to expand...
Click to collapse

Thanks, I quite enjoyed aicp on my Mi 4c

Wow, great news. Thanks!

Nice and stable ROM, can you built-in camera2 api HAL3 like shamu?

Big thanks @Miccia
Almost a day with this ROM and don't have any problems. Great work. :good:

Finally. Any chance to port call recording to this rom? How about VoLTE?
Thank you very mich for your work. Will try it later.

Great work

Maybe i missed it but how about credit to Cozzmy13 and xiaobai112220 for the great effort they made so far?

DocRambone said:
Maybe i missed it but how about credit to Cozzmy13 and xiaobai112220 for the great effort they made so far?
Click to expand...
Click to collapse
I'm both an AICP and a Lineage member, and both teams have been mentioned, that's enough credits for me.

Great news, that I'm waiting for.
Thanks.

Critical bug, stuck charge at 90%

otg pendrive doesn't work. it's decribed as need to be fixed but even after format from AICP it still not works
on lineageos lineage-14.1-20171130 from Cozzmy13 it's working
logs attached,thanks
log

fahmi182 said:
Critical bug, stuck charge at 90%
Click to expand...
Click to collapse
100% here

Miccia said:
100% here
Click to expand...
Click to collapse
I think because of this, powerhal bug

fahmi182 said:
I think because of this, powerhal bug
Click to expand...
Click to collapse
Common errors for caf hals, i have the same in my logcat

Miccia said:
Common errors for caf hals, i have the same in my logcat
Click to expand...
Click to collapse
Many users have some bug like me, cant charge, stuck at 90%+

https://plus.google.com/112791584407536662842/posts/D9MjVdBpKPX Here is my bug report about AudioFX. Have you noticed it?
---------- Post added at 11:54 AM ---------- Previous post was at 11:52 AM ----------
fahmi182 said:
Many users have some bug like me, cant charge, stuck at 90%+
Click to expand...
Click to collapse
Yeah I had it too exactly at 90percent. Re-plugging solved the issue.

oliver_jang said:
https://plus.google.com/112791584407536662842/posts/D9MjVdBpKPX Here is my bug report about AudioFX. Have you noticed it?
---------- Post added at 11:54 AM ---------- Previous post was at 11:52 AM ----------
Yeah I had it too exactly at 90percent. Re-plugging solved the issue.
Click to expand...
Click to collapse
We are tracking audiofx from Lineageos

Hello, thank for your ROM, but in this ROM I have common bug of custom ROM with hotspot. Hotspot does not share internet connection. In the other ROM I fixed it with custom Kernel like Hasty and Popkern. Can you fix it?

[ROM] [VOLTE] AICP 12.1 [UNOFFICIAL] [20/2/2018]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LAOS) we are now LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 12.1
Download link: https://drive.google.com/open?id=1Dt5AQj_M8A_9rl6iVyIEfkqLLk1kovqO
Google Apps:
(link the best one for your device, there are several variants out there right now, pico/nano gapps from opengapps.org is almost always a good choice though)
Fingerprint (Goodix)
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm for SDK 25.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Settings -> Navigation -> Enable navigation bar. The bar can be configured separately in its settings.
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I keep losing root with Magisk, how do I fix it?
A. Check this out. If that doesn't work for you, ask for help in this thread, read or ask in the Magisk thread on XDA or just re-flash Magisk!
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the root section in the AICP Extras menu.
The ROM should contain everything you need to enjoy Android Nougat. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update) as long as the instructions of your
root solution do not state something else (="persistence on dirty flashing") !
KERNEL:
The kernel in this ROM Mi's kernel and additions from Deadman.
PREREQUISITE FOR OTA:
To be able to flash using the built-in OTA app, TWRP recovery is needed.
You can still use the LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. The Zipfile gets saved in the "aicp_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/deadman96385/android_kernel_xiaomi_msm8953
ROM & Additional links:
AICP Gerrit Code Review
AICP on Github
AICP G+ community
Contributors:
(mention all the devs who have contributed to your device tree, kernel, vendor, etc,
only mention the main ones though, probably the top four or so, otherwise this list will be a mile long unless if you're a huge kanger xD)
ROM OS Version: 7.1.2 Nougat
Version Information:
Status: TESTING
Release Date: 02-20-2018
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
Android Ice Cold Project , ROM for the Xiaomi Mi A1
Contributors
IamJoker03
Source Code: https://github.com/AICP
ROM OS Version: 7.x Nougat
ROM Firmware Required: Unlocked Bootloader/TWRP Recovery
Version Information
Status: Alpha
Created 2018-02-20
Last Updated 2018-02-20

Reserved
Known Issues :
Goodix (Fixing)
Please downgrade to Nougat Fastboot image before flashing this.
PS :- Thanks to the testers and specially IronHrt on Telegram for testing this ROM.
After flashing ROM, gapps and magisk for those who wish to keep TWRP permanently, flash the twrp installer zip again as installing the ROM updates the boot.img where TWRP is stored.
Peace.

Reserved

screendumps would be nice

It can be my first custom ROM on this A1!
I'll flash it after worktime, thank you :good:
Sent from my Mi A1 using XDA Labs

Nice! Used AICP rom on my find7, I'm definitely gonna flash this. One of the best!

So what about camera in 3rd party apps? Fixed ? :fingers-crossed:

Screenies!

Rajeev said:
So what about camera in 3rd party apps? Fixed ? :fingers-crossed:
Click to expand...
Click to collapse
Fixed [emoji16]
Sent from my Mi A1 using Tapatalk

Camera2api enabled?

Prince Abhinav Gupta said:
Fixed [emoji16]
Click to expand...
Click to collapse
Thanks alot buddy:good:

Rajeev said:
Thanks alot buddy:good:
Click to expand...
Click to collapse
[emoji16]
Sent from my Mi A1 using Tapatalk

If you are on Oreo. Full wipe and flash N fastboot images before trying out AICP..

Prince Abhinav Gupta said:
Fixed [emoji16]
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
No ****?! For real? Just with this ROM or is the fix pulled from LOS? Feeling a strong urge to root/twrp my device and give this a spin! :fingers-crossed:

I will build ROM if tester available
Anyone?

finally its great to see AICP.. Now waiting for OREO the big bang..

wow great to see this rom , gonna flash it right now and any update on hissing noise fix ?

Rajeev said:
Before building rom remove the whole post in ur previous reply
Click to expand...
Click to collapse
Sorry My mistake

i have a dumb question......when flashing this rom do i have to flash it in both the partions...???? its my first time with a dual partion phone....

arunassain said:
Sorry My mistake
Click to expand...
Click to collapse
Its happen. Kindly edit ur previous post. :good:

[ROM][OFFICIAL] AICP - 14.0 - P 9.0 polaris

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we are now based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
If there are any bugs, either we will sort them out or the GZOSP team, if it concerns their code base. This ROM isn't GZOSP supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 14.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 28.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure might vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
The root solution can be flashed together with every OTA update (= ROM Update).
Currently supported Root Solution:
Magisk stable
Magisk versions >= 17.2 don't usually require to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time.
Unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
To be able to flash using the built-in OTA app, TWRP recovery is needed.
Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_xiaomi_sdm845
Device tree source:
https://github.com/AICP/device_xiaomi_polaris
Vendor source:
https://github.com/AICP/proprietary_vendor_xiaomi
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
[ROM][OFFICIAL] AICP - 14.0 - P 9.0 polaris, ROM for the Xiaomi Mi Mix 2S
Contributors
Miccia
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Created 2019-03-21
Last Updated 2019-03-21

Wow! Awesome <3
Thanks :laugh:

Perfect ROM! Awesome!

Build is based on 6th of March. A bit misleading with 23rd of March. Nevertheless, works fine.

No miui-p based firmware for fitst flash?

MacLaughlin said:
Build is based on 6th of March. A bit misleading with 23rd of March. Nevertheless, works fine.
Click to expand...
Click to collapse
2019 03 21 build arrived just now.

AWESOME ROM with Fullscreen gestures, I have installed 21.03 Version which was available after the announcement of the OP.

Device bootloops after ota update for me

MacLaughlin said:
Device bootloops after ota update for me
Click to expand...
Click to collapse
Maybe again the known Magisk or Camera AnXUnity issue? If one of both is installed you may need to uninstall before OTA.
Gesendet von meinem Mi MIX 2S mit Tapatalk

BetaHydri said:
Maybe again the known Magisk or Camera AnXUnity issue? If one of both is installed you may need to uninstall before OTA.
Gesendet von meinem Mi MIX 2S mit Tapatalk
Click to expand...
Click to collapse
Yeah maybe.

on latest build NFC doesn't work

andriu123 said:
on latest build NFC doesn't work
Click to expand...
Click to collapse
Ok the same issue was on LOS Build 13.03
Gesendet von meinem Mi MIX 2S mit Tapatalk

What about auto brightness in this room? It's like other aosp roms?
Στάλθηκε από το Mi MIX 2S μου χρησιμοποιώντας Tapatalk

xatou said:
What about auto brightness in this room? It's like other aosp roms?
Στάλθηκε από το Mi MIX 2S μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
I'm using it since 08:00 AM today and I didn't faced the brightness issue yet.
Regarding NFC I already wrote a bug report on their official Discord channel. It is exactly the same issue like LOS 13.03 build. The NFC Symbol at the settings icon is missing and in setting only Bluetooth is available.
LogCat
View attachment 2019-03-22-16-20-49.txt

Remember LorD ClockaN from HTC Desire HD if I'm not mistaken, well rom seems ok but permissive SELinux, hmm

xatou said:
What about auto brightness in this room? It's like other aosp roms?
Στάλθηκε από το Mi MIX 2S μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
It works fine except in low light conditions. Then the brightness keeps changing all the the time without a reason. So I turn it off in the evening and back on in the morning.

M1chiel said:
It works fine except in low light conditions. Then the brightness keeps changing all the the time without a reason. So I turn it off in the evening and back on in the morning.
Click to expand...
Click to collapse
The same as me. And I have this problem on all the ROMs, including MIUI. That's really annoying ?

New build UP! NFC is fixed

Good job, thanks!

New build up, 27/03/2019.

[ROM] [11] [NIGHTLY] Android Ice Cold Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
NikGapps or OpenGapps
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work), GApps are already included for some a/b devices.
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_xiaomi_sdm660
Device tree source:
https://github.com/AICP/device_xiaomi_lavender
Vendor source:
https://github.com/AICP/proprietary_vendor_xiaomi
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
Android Ice Cold Project, ROM for the Xiaomi Redmi Note 7
Contributors
Nebrassy, semdoc, wartomato, rcstar6696, renascape
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 15.0
Stable Release Date: 2020-06-03
Created 2020-05-18
Last Updated 2020-10-19

Reserved
R Nightly download:
https://www.androidfilehost.com/?w=files&flid=318676
Download:
https://dwnld.aicp-rom.com/
Telegram (memes ahead):
https://t.me/NSSFB
AICP Announcement channel:
https://t.me/aicprom

Reserved
Gcam fix:
https://www.androidfilehost.com/?w=files&flid=318702

good aicp , thanks

One of the best ROMs out there with great devs. I hope it will be good maintained. Gonna give it a try after some days.

I tried it yesterday and love AICP but the camera world crash using HDR and I couldn't find a gcam that worked right.

jmoss1972 said:
I tried it yesterday and love AICP but the camera world crash using HDR and I couldn't find a gcam that worked right.
Click to expand...
Click to collapse
Try this
https://www.celsoazevedo.com/files/android/google-camera/dev-the_dise/

Tried the gcam, it crashes too, I'll keep looking for a gcam that works.

jmoss1972 said:
Tried the gcam, it crashes too, I'll keep looking for a gcam that works.
Click to expand...
Click to collapse
Try TrCamera.V5 or Bruial 7.2.10. If not working change the kernel. Iam on AICP Q unofficial from April, this cameras works great.
Great, good job now official. AICP my favourite rom. EAS is still supported? The unofficial roms before have a very good BB with some EAS kernels. Iam not a gamer and don't found a good HMP with very good BB for AICP Q.

Rangdrol said:
Try TrCamera.V5 or Bruial 7.2.10. If not working change the kernel. Iam on AICP Q unofficial from April, this cameras works great.
---------- Post added at 09:27 AM ---------- Previous post was at 09:24 AM ----------
Great, good job now official. AICP my favourite rom. EAS is still supported? The unofficial roms before have a very good BB with some EAS kernels. Iam not a gamer and don't found a good HMP with very good BB for AICP Q.
Click to expand...
Click to collapse
Was using eas before, while it does improve smoothness and UI performance, it unfortunately causes some really nasty freezes, so I swit he'd back to HMP, you're free to use a custom kernel though

Nebrassy said:
Was using eas before, while it does improve smoothness and UI performance, it unfortunately causes some really nasty freezes, so I swit he'd back to HMP, you're free to use a custom kernel though
Click to expand...
Click to collapse
This good to hear, I will try. With OLK-reloaded-V5, Papermoon 3.7 and Notkernel EAS I never had freezes with AICP Q in daily use (5weeks) and very good BB. Papermoon no. 1 smooth, than OLK. But I never tried games.

Hey. I have a headset problem. The volume change on the headphones does not work.. when I press the button, the volume goes up or down. does anyone have the same?

xander21 said:
Hey. I have a headset problem. The volume change on the headphones does not work.. when I press the button, the volume goes up or down. does anyone have the same?
Click to expand...
Click to collapse
I use headphone with volume control and both work. The volume control of the headphone and volume control of the smartphone. Driver from ViperFx. But I am still on aicp_lavender_q-15.0-UNOFFICIAL-20200412. Tomorrow I want update to the official one, after testing SyberiaOS. But I don't think they change the sound control in the official one.

Rangdrol said:
I use headphone with volume control and both work. The volume control of the headphone and volume control of the smartphone. Driver from ViperFx. But I am still on aicp_lavender_q-15.0-UNOFFICIAL-20200412. Tomorrow I want update to the official one, after testing SyberiaOS. But I don't think they change the sound control in the official one.
Click to expand...
Click to collapse
In lineageos there is also a problem with the volume of the headphones. It's probably a kernel bug. Mokee rom and Pixel experience is ok. they have a different kernel, so they work Hmmm....

xander21 said:
In lineageos there is also a problem with the volume of the headphones. It's probably a kernel bug. Mokee rom and Pixel experience is ok. they have a different kernel, so they work Hmmm....
Click to expand...
Click to collapse
For me it works fine. I have AUDICTUS ADRENALINE 2.0, before install AICP I flashed global rom via fastboot.
---------- Post added at 06:49 PM ---------- Previous post was at 06:34 PM ----------
Where can I find FM radio app?

Really good rom, you know how to do for smali patcher work on your rom? In other roms work

Hi guys, does anyone know how the battery goes? And how is the camera doing?
Thanks.

KackBarton said:
Hi guys, does anyone know how the battery goes? And how is the camera doing?
Thanks.
Click to expand...
Click to collapse
BB is good, but depends what kernel you use. You can change kernel and have 1-2 hours more. Cameras I installed TrCamera V5 and Hypercam (gcams) both works great.

Rangdrol said:
BB is good, but depends what kernel you use. You can change kernel and have 1-2 hours more. Cameras I installed TrCamera V5 and Hypercam (gcams) both works great.
Click to expand...
Click to collapse
Thanks bro.

lheredia1987 said:
Really good rom, you know how to do for smali patcher work on your rom? In other roms work
Click to expand...
Click to collapse
Try one more time all good now, love this rom

Database Develop

welcome