Related
Hi all-so I decided to flash back to stock since my 32GB Nexus was down to about 14GB from flashing ROMS and such.Everything seems to have gone smoothly however when I try the oem unlock command I am told that the device is already unlocked.I proceeded to root and then I tried to flash TWRP but I get permission denied.
Also,my Play Store just crashed when I try and type in an app to search for.
The question is-how do I know which factory image is right for my device?
There are a number of 5.1.1 images,I selected the one marked for all carriers except T-Mobile.Could I have selected the wrong image to be causing some of these problems?
Or should I just go ahead and jump up to 6.0.1-there is only 1 image for that release.
I would't think the image mattered that much but something is wrong here.
I got the phone last week from the Amazon sale and I activated it no problem on Verizon and flashed several ROMS no issue.
Advice is much appreciated.
I really don't understand why anyone would flash to an old version of a ROM. I appreciate that people have different tastes (e.g. don't like material design) or perceive different characteristics (e.g. better battery life) but in general each new ROM brings advantages, stability, security, improvements, so why stick with an old one when you can have new?
Me, I'd definitely go for a full clean install of MMB29K.
And if you insist on root, be aware of the issues with Marshmallow - you need a different kernel (Elementalx is popular) or alternatively flash TWRP and install Chainfire's SuperSU 2.62. I say 2.62 rather than 2.65 because there are numbers of people reporting that root doesn't work with 2.65, which isn't the case with 2.62, and from personal experience 2.62 works absolutely fine on my 6.0.1 N6.
dahawthorne said:
I really don't understand why anyone would flash to an old version of a ROM. I appreciate that people have different tastes (e.g. don't like material design) or perceive different characteristics (e.g. better battery life) but in general each new ROM brings advantages, stability, security, improvements, so why stick with an old one when you can have new?
Me, I'd definitely go for a full clean install of MMB29K.
And if you insist on root, be aware of the issues with Marshmallow - you need a different kernel (Elementalx is popular) or alternatively flash TWRP and install Chainfire's SuperSU 2.62. I say 2.62 rather than 2.65 because there are numbers of people reporting that root doesn't work with 2.65, which isn't the case with 2.62, and from personal experience 2.62 works absolutely fine on my 6.0.1 N6.
Click to expand...
Click to collapse
Thanks for the detailed response. I was running 5.1 initially because that is what the phone booted with and I like full-featured ROMS like BlissPop. I guess I'll give 6.0.1 a whirl.It just seemed like it was too new to be rock solid. I had as many features on my old S3 running 4.4.2 as I have seen since then if not more actually. I am curious about Google Now On Tap however.
Hopefully this gets me fixed up.Cheers.
chiadrum said:
Hi all-so I decided to flash back to stock since my 32GB Nexus was down to about .......
Click to expand...
Click to collapse
It is possible that the issue is caused because you downgraded the bootloader by flashing 5.1.1.
Flash the complete latest stock 6.0.1 images.
Flashing 6.0.1 now. Both times the CMD window has showed me archive does not contain boot.sig and recovery.sig. I am guessing that is normal?
The 5.1.1 started working fine after an update all but I still couldn't install TWRP fyi.
Let's see how Marshmallow tastes!
The "does not contain boot.sig and recovery.sig" is standard. I have no idea why it continues to appear version after version, but it has no effect on the installation.
chiadrum said:
Flashing 6.0.1 now. Both times the CMD window has showed me archive does not contain boot.sig and recovery.sig.
Click to expand...
Click to collapse
Same on my N6 when flashing 6.0.1. When 6.0.1 is running, you can flash TWRP recovery in fastboot mode.
NLBeev said:
Same on my N6 when flashing 6.0.1. When 6.0.1 is running, you can flash TWRP recovery in fastboot mode.
Click to expand...
Click to collapse
Thanks guys.
chiadrum said:
Thanks guys.
Click to expand...
Click to collapse
Ok more strangeness.pPhone is working fine,no issues.However I am unable to unlock bootloader using the fastboot OEM unlock command.
The message is "Not supported command in current status".
Yes,OEM unlock is allowed in Dev Options.I tried turning that off in case the indicator was faulty and then I couldn't even attempt to unlock,immediate failure.
Tried this several times after reboots as well.
Build MMB29K.
Any ideas?
Would it be too simple an answer to say that it's because the phone is already unlocked? You couldn't install a new ROM with a locked bootloader.
I myself have been a bit surprised by the peremptory & derogatory comments of some of the very senior members in these forums when people ask what seem to be questions with obvious answers, and I'm beginning to see their point...
Still, I also recognise that an "easy" question is one that you know the answer to, and I don't want to put people off asking questions. Being knocked back myself several times hasn't stopped me asking.
That's actually a very good point.Perhaps the image came boitloader unlocked.I'll see if I can flash TWRP and install something. I haven't loaded any roms since the initial flash,I was following protocol to unlock,root and then flash.Appreciate the help.Sometimes obvious seems too easy.
chiadrum said:
That's actually a very good point.Perhaps the image came boitloader unlocked.I'll see if I can flash TWRP and install something. I haven't loaded any roms since the initial flash,I was following protocol to unlock,root and then flash.Appreciate the help.Sometimes obvious seems too easy.
Click to expand...
Click to collapse
Confirmed I am an idiot.Device is unlocked already. Wasn't expecting that.The people way smarter than me who prepared that image took care of it for me.
Not an idiot at all. Like I said, an easy question is one that you know the answer to. Experience counts...
It's not the image that is unlocked - it's the device. Once unlocked, you have to specifically lock it again, but it's neither simple nor a good idea. An unlocked device gives you a far better chance to recover from errors.
I'm currently on a stable build of Oxygen OS 5.0.2 Oreo and I was thinking of rooting my phone using Magisk.Most of the guides that I've seen had users root using a nougat based version of OOS or they were on beta. I'll have to unlock the bootloader and flash TWRP but this is where the confusion comes in - Can I root a stable build of OOS? Will I have to switch to beta to root? Also, I'm a little scared about whether this DM-Verity issue will arise or not if I try to root or flash TWRP. So can someone please explain what that Issue really is and will it arise in my case? And if someone can just give me a guide on how to root it, I'll really appreciate it. And are there any known issues which arise after successfully rooting OOS 5.0.2?
No obstacles in rooting stable OOS and no problems should arise after doing it. You just need to make a backup of all your data, unlock bootloader, flash TWRP, flash Magisk and go.
If you trigger dm-verity, tyou have two choices - either ignore it on every reboot or follow a guide about removing it.
anshikohri said:
I'm currently on a stable build of Oxygen OS 5.0.2 Oreo and I was thinking of rooting my phone using Magisk.Most of the guides that I've seen had users root using a nougat based version of OOS or they were on beta. I'll have to unlock the bootloader and flash TWRP but this is where the confusion comes in - Can I root a stable build of OOS? Will I have to switch to beta to root? Also, I'm a little scared about whether this DM-Verity issue will arise or not if I try to root or flash TWRP. So can someone please explain what that Issue really is and will it arise in my case? And if someone can just give me a guide on how to root it, I'll really appreciate it. And are there any known issues which arise after successfully rooting OOS 5.0.2?
Click to expand...
Click to collapse
All things that you are mentioning show clearly that you didn't pay attention to all the basic info for rooting a 3/3T.
Why do u need a guide for Oreo, when you have a guide for nougat?
It's exactly the same method.
Also DM verity is just a warning, so why to be scared.
Maybe you should avoid doing something that you don't understand.
Unleashed by my rooted OP3T on 8.0
RASTAVIPER said:
All things that you are mentioning show clearly that you didn't pay attention to all the basic info for rooting a 3/3T.
Why do u need a guide for Oreo, when you have a guide for nougat?
It's exactly the same method.
Also DM verity is just a warning, so why to be scared.
Maybe you should avoid doing something that you don't understand.
Unleashed by my rooted OP3T on 8.0
Click to expand...
Click to collapse
Well I had a Redmi 2 before this and when I tried to root my lineage Os based on oreo with magisk using the same method I used with Nougat, i bricked my device. So that's why i was a little apprehensive. But thank you for your response.
przemcio510 said:
No obstacles in rooting stable OOS and no problems should arise after doing it. You just need to make a backup of all your data, unlock bootloader, flash TWRP, flash Magisk and go.
If you trigger dm-verity, tyou have two choices - either ignore it on every reboot or follow a guide about removing it.
Click to expand...
Click to collapse
Will I run into trouble with xposed or substratum on OOS?
anshikohri said:
Will I run into trouble with xposed or substratum on OOS?
Click to expand...
Click to collapse
No, if you use compatible modules and themes. I had no problems using both on OOS. Please note that if you install Xposed, you won't be able to use SafetyNet protected apps (Android Pay, Pokemon Go, Snapchat (you have to login before installing Xposed to make it work) etc.).
anshikohri said:
Well I had a Redmi 2 before this and when I tried to root my lineage Os based on oreo with magisk using the same method I used with Nougat, i bricked my device.
Click to expand...
Click to collapse
You aren't being specific enough when you say "same method". The general method is often similar. But you will virtually never use the exact same steps when rooting different Android builds (such as Nouget vs. Oreo). In particular, you always need to use updated versions of files for TWRP and Magisk. By definition, the root exploits will change between Android versions. So using old version Magisk is basically asking for a "soft brick". Not a real brick. It usually just means you need to use the correct version Magisk in order to recover. Or at worst, flash recovery image (or restore TWRP backup - which you should always have a backup of the stock ROM before rooting) then root with the proper files. Don't know anything about your old phone - but I'll guess this is what happened (which is a common enough scenario).
Similarly, you should also use the most current version TWRP. Older versions may sometimes work, depending on the situation. But Oreo (vs. Nougat) in particular, TWRP had to be updated to be compatible. Meaning you must use a Oreo-compatible version of TWRP to avoid problems. Short story, use current version TWRP to avoid problems.
Current versions are:
TWRP 3.2.1-0
Magisk v16.0
Also proceed with the knowledge that this device is very hard to brick. Just flashing TWRP and Magisk will not brick it (not a true brick anyway - a "soft" brick is easy to recover from as already described). Just make sure you are using Magisk for the OP3/3T (not some other device) and the risk is virtually zero. Even in the case of a brick, this device has an unbricking tool. Just be sure to take the following precautions:
- Make a TWRP backup of the stock ROM before you flash Magisk (always amazed at how many folks skip this!) or otherwise have the stock recovery image available in case anything happens. Basically always have a backup plan!
- Find the unbrick tool, and again have it available (at least bookmarked) in case you need it.
- Most importantly, read and understand all the steps and concepts before you begin. As another already mentioned, it seems your knowledge about some of the concepts is a bit lacking.
---------- Post added at 10:30 AM ---------- Previous post was at 10:06 AM ----------
anshikohri said:
Most of the guides that I've seen had users root using a nougat based version of OOS or they were on beta.
Click to expand...
Click to collapse
Beta or Stable doesn't matter. I don't know if I've ever seen a root guide specific to the Beta version, so I'm not even sure what you are talking about.
As far as the guides being for Nougat, I've already addressed that above. Basically, everything is the same, except the file versions (use updated TWRP, Magisk) so that is why nobody has bothered posting new guides for every OOS build.
anshikohri said:
Also, I'm a little scared about whether this DM-Verity issue will arise or not if I try to root or flash TWRP.
Click to expand...
Click to collapse
DM-verity is just a warning screen that appears when you reboot or power-on the phone. It will go away and continue to boot normally after 5 seconds, or just press the power button to dismiss the warning.
Once the phone has TWRP and rooted, you will have the DM-verity warning screen. If you like, you can flash a patched boot image, so you don't see the DM-verity warning screen on reboot/power-on.
You will also have a very similar (but separate) warning screen once the bootloader is unlocked. Unlike the DM-verity screen, the bootloader unlocked warning is impossible to be removed. The only way to remove it is to relock the bootloader, which I would strongly warn you not to do on a modified (TWRP and root) device! The bootloader unlock warning screen is just something you live with if you are rooted (just wait the 5 seconds or press the power button to skip it).
There is also the unlikely event that DM-verity will outright prevent the OS from booting. But this shouldn't happen just from flashing TWRP and Magisk (at least not if you've done it properly). Even if this happens, just restore your TWRP backup, or flash recovery image, and start over - checking what you did (cause you probably did something wrong).
anshikohri said:
And are there any known issues which arise after successfully rooting OOS 5.0.2?
Click to expand...
Click to collapse
This is so vague, as to make it hard to figure out what you are even asking.
In short, No.
Long answer: Some apps will not work with root, such as banking apps and Netflix. But the Magisk "Hide" feature should work to conceal root and make these apps work. It's a whole topic in itself, so read up in existing threads if this applies to you, and you want more info.
Other than that, there isn't anything with Magisk root that I would consider an "issue" and make me want to unroot.
redpoint73 said:
You aren't being specific enough when you say "same method". The general method is often similar. But you will virtually never use the exact same steps when rooting different Android builds (such as Nouget vs. Oreo). In particular, you always need to use updated versions of files for TWRP and Magisk. By definition, the root exploits will change between Android versions. So using old version Magisk is basically asking for a "soft brick". Not a real brick. It usually just means you need to use the correct version Magisk in order to recover. Or at worst, flash recovery image (or restore TWRP backup - which you should always have a backup of the stock ROM before rooting) then root with the proper files. Don't know anything about your old phone - but I'll guess this is what happened (which is a common enough scenario).
Similarly, you should also use the most current version TWRP. Older versions may sometimes work, depending on the situation. But Oreo (vs. Nougat) in particular, TWRP had to be updated to be compatible. Meaning you must use a Oreo-compatible version of TWRP to avoid problems. Short story, use current version TWRP to avoid problems.
Current versions are:
TWRP 3.2.1-0
Magisk v16.0
Also proceed with the knowledge that this device is very hard to brick. Just flashing TWRP and Magisk will not brick it (not a true brick anyway - a "soft" brick is easy to recover from as already described). Just make sure you are using Magisk for the OP3/3T (not some other device) and the risk is virtually zero. Even in the case of a brick, this device has an unbricking tool. Just be sure to take the following precautions:
- Make a TWRP backup of the stock ROM before you flash Magisk (always amazed at how many folks skip this!) or otherwise have the stock recovery image available in case anything happens. Basically always have a backup plan!
- Find the unbrick tool, and again have it available (at least bookmarked) in case you need it.
- Most importantly, read and understand all the steps and concepts before you begin. As another already mentioned, it seems your knowledge about some of the concepts is a bit lacking.
---------- Post added at 10:30 AM ---------- Previous post was at 10:06 AM ----------
Beta or Stable doesn't matter. I don't know if I've ever seen a root guide specific to the Beta version, so I'm not even sure what you are talking about.
As far as the guides being for Nougat, I've already addressed that above. Basically, everything is the same, except the file versions (use updated TWRP, Magisk) so that is why nobody has bothered posting new guides for every OOS build.
DM-verity is just a warning screen that appears when you reboot or power-on the phone. It will go away and continue to boot normally after 5 seconds, or just press the power button to dismiss the warning.
Once the phone has TWRP and rooted, you will have the DM-verity warning screen. If you like, you can flash a patched boot image, so you don't see the DM-verity warning screen on reboot/power-on.
You will also have a very similar (but separate) warning screen once the bootloader is unlocked. Unlike the DM-verity screen, the bootloader unlocked warning is impossible to be removed. The only way to remove it is to relock the bootloader, which I would strongly warn you not to do on a modified (TWRP and root) device! The bootloader unlock warning screen is just something you live with if you are rooted (just wait the 5 seconds or press the power button to skip it).
There is also the unlikely event that DM-verity will outright prevent the OS from booting. But this shouldn't happen just from flashing TWRP and Magisk (at least not if you've done it properly). Even if this happens, just restore your TWRP backup, or flash recovery image, and start over - checking what you did (cause you probably did something wrong).
This is so vague, as to make it hard to figure out what you are even asking.
In short, No.
Long answer: Some apps will not work with root, such as banking apps and Netflix. But the Magisk "Hide" feature should work to conceal root and make these apps work. It's a whole topic in itself, so read up in existing threads if this applies to you, and you want more info.
Other than that, there isn't anything with Magisk root that I would consider an "issue" and make me want to unroot.
Click to expand...
Click to collapse
That certainly cleared all my doubts and my inhibitions. Thank you so much for taking the time to address my questions.
anshikohri said:
That certainly cleared all my doubts and my inhibitions. Thank you so much for taking the time to address my questions.
Click to expand...
Click to collapse
You're certainly welcome. There is a "Thanks" button you can click for any posts that you found helpful, if you care to do so.
And a constructive criticism on forum etiquette: please don't quote a whole huge long post, like you did for my response. I know it's the default when responding to include a quote. But simply delete what isn't directly relevant (maybe keep a few lines, as appropriate) in the interest of keeping the forum free of clutter; and avoid folks have having to scroll down a whole screen/page which is just my post in duplicate. You can still edit the previous post, if you like.
Good luck on rooting. I'm sure it will go fine. Welcome to the dark side.
redpoint73 said:
And a constructive criticism on forum etiquette: please don't quote a whole huge long post, like you did for my response. I know it's the default when responding to include a quote. But simply delete what isn't directly relevant (maybe keep a few lines, as appropriate) in the interest of keeping the forum free of clutter; and avoid folks have having to scroll down a whole screen/page which is just my post in duplicate. You can still edit the previous post, if you like.
As you can see, I'm new to this, so forgive me. I'll keep this in mind the next time I post something and Thank You for your advise and your help.
Click to expand...
Click to collapse
redpoint73 said:
You aren't being specific enough when you say "same method". The general method is often similar. But you will virtually never use the exact same steps when rooting different Android builds (such as Nouget vs. Oreo). In particular, you always need to use updated versions of files for TWRP and Magisk. By definition, the root exploits will change between Android versions. So using old version Magisk is basically asking for a "soft brick". Not a real brick. It usually just means you need to use the correct version Magisk in order to recover. Or at worst, flash recovery image (or restore TWRP backup - which you should always have a backup of the stock ROM before rooting) then root with the proper files. Don't know anything about your old phone - but I'll guess this is what happened (which is a common enough scenario).
Similarly, you should also use the most current version TWRP. Older versions may sometimes work, depending on the situation. But Oreo (vs. Nougat) in particular, TWRP had to be updated to be compatible. Meaning you must use a Oreo-compatible version of TWRP to avoid problems. Short story, use current version TWRP to avoid problems.
Current versions are:
TWRP 3.2.1-0
Magisk v16.0
Also proceed with the knowledge that this device is very hard to brick. Just flashing TWRP and Magisk will not brick it (not a true brick anyway - a "soft" brick is easy to recover from as already described). Just make sure you are using Magisk for the OP3/3T (not some other device) and the risk is virtually zero. Even in the case of a brick, this device has an unbricking tool. Just be sure to take the following precautions:
- Make a TWRP backup of the stock ROM before you flash Magisk (always amazed at how many folks skip this!) or otherwise have the stock recovery image available in case anything happens. Basically always have a backup plan!
- Find the unbrick tool, and again have it available (at least bookmarked) in case you need it.
- Most importantly, read and understand all the steps and concepts before you begin. As another already mentioned, it seems your knowledge about some of the concepts is a bit lacking.
---------- Post added at 10:30 AM ---------- Previous post was at 10:06 AM ----------
Beta or Stable doesn't matter. I don't know if I've ever seen a root guide specific to the Beta version, so I'm not even sure what you are talking about.
As far as the guides being for Nougat, I've already addressed that above. Basically, everything is the same, except the file versions (use updated TWRP, Magisk) so that is why nobody has bothered posting new guides for every OOS build.
DM-verity is just a warning screen that appears when you reboot or power-on the phone. It will go away and continue to boot normally after 5 seconds, or just press the power button to dismiss the warning.
Once the phone has TWRP and rooted, you will have the DM-verity warning screen. If you like, you can flash a patched boot image, so you don't see the DM-verity warning screen on reboot/power-on.
You will also have a very similar (but separate) warning screen once the bootloader is unlocked. Unlike the DM-verity screen, the bootloader unlocked warning is impossible to be removed. The only way to remove it is to relock the bootloader, which I would strongly warn you not to do on a modified (TWRP and root) device! The bootloader unlock warning screen is just something you live with if you are rooted (just wait the 5 seconds or press the power button to skip it).
There is also the unlikely event that DM-verity will outright prevent the OS from booting. But this shouldn't happen just from flashing TWRP and Magisk (at least not if you've done it properly). Even if this happens, just restore your TWRP backup, or flash recovery image, and start over - checking what you did (cause you probably did something wrong).
This is so vague, as to make it hard to figure out what you are even asking.
In short, No.
Long answer: Some apps will not work with root, such as banking apps and Netflix. But the Magisk "Hide" feature should work to conceal root and make these apps work. It's a whole topic in itself, so read up in existing threads if this applies to you, and you want more info.
Other than that, there isn't anything with Magisk root that I would consider an "issue" and make me want to unroot.
Click to expand...
Click to collapse
Hi my oneplus 3t is on Oreo 5.0.2. I flashed twrp recovery nd super su root but when I restarted the phone it's stuck on black screen with white oneplus logo.what should I do now?my phone is going into twrp recovery
Should I flash stock oos 5.0.2 from twrp recovery? Pls guide
mannulko said:
Hi my oneplus 3t is on Oreo 5.0.2. I flashed twrp recovery nd super su root but when I restarted the phone it's stuck on black screen with white oneplus logo.what should I do now?my phone is going into twrp recovery
Should I flash stock oos 5.0.2 from twrp recovery? Pls guide
Click to expand...
Click to collapse
Please don't include page-long quotes in your post. For that matter, don't quote my posts at all, if you aren't going to refer to it, or read it.
And please only post your problem to one thread, per forum rules. It will be answered. Making more posts, will NOT get your question answered any faster. It will just confuse those trying to help you, and confuse you; jumping around to 4 different threads.
So about 3 weeks ago my 2 year old 3T just stopped working out of nowhere. I debated on whether to upgrade for over a week, but eventually decided to replace it with the same, just to have the familiar ROM, & not to have to learn anything new or mess with anything else, since I'm going through a lot of personal stuff right now. Anyway, I got the phone over a week ago and I've tried everything since then to get it running something beside OOS to no avail. Every single time it goes to sleep in another ROM, once I wake it up, touch is no longer responsive. I can't for the life of me figure out why. I have tried so many different things, in so many different ways. I know it might sound ridiculous but at this point I'm just in tears... I really need a functional phone, and I never would have bought another OP3T if I knew I'd be stuck with OOS....
The process I went through as soon as I got it:
Unfortunately I don't remember the version of OOS that it came with
- Unlock bootloader
- Flash TWRP (twrp-3.0.4-1 due to a thread I came across and was confused by)
- Wipe everything
- Flash recommended firmware for my ROM (posted in the ROM's thread)
- Flash my favorite ROM (Unofficial RR)
- Flash Magisk
- Boot, everything seems fine, screen goes off, turn it back on, unable to use touchscreen anymore.
I then used the unbrick tool, and tried again. Same problem. Used unbrick tool, unlocked bootloader, this time tried to flash this unofficial Lineage . Booted. It went to sleep. Woke up. Touchscreen nonfunctional.
I shut it down. Unbrick tool. This time I let it update itself all the way up to the very latest version of OOS. I go through the entire process again, this time flashing TWRP 3.2.1.0, it's the same thing. I've tried going up to open beta and then flashing my roms. I've tried flashing the rom without firmware, without magisk. With gapps. Without gapps. I always format and wipe everything. I also tried this on the off chance it might work.... I have seriously done the process every way imaginable, over twenty times since I got the phone last week.... nothing ever works. I also just tried Cyanogenmod, but it wouldn't flash at all.
I don't know what to do anymore. I just want to have a phone that I don't hate. At this point, I am too tired and I've got too much going on to figure this out on my own anymore. I would be grateful to pay someone at this point just to help me get this working honestly.... so if there's anyone out there who knows how to fix this, please let me know
Did you buy a new unit from somewhere or did you get a second hand unit ? In the latter case, the person who owned the device before you might have replaced the display for whatever reason, replaced displays often run into these kind of issues.
Also, does this happen on all the ROMs ? It seems you're only flashing Nougat roms, It could be that the hardware is not falling in line with the older software (just a guess). Try flashing a newer, latest updated pie rom and see how that works out.
Mizart said:
It seems you're only flashing Nougat roms, It could be that the hardware is not falling in line with the older software (just a guess).
Click to expand...
Click to collapse
What does that even mean? Sounds like you are just making stuff up.
---------- Post added at 12:23 PM ---------- Previous post was at 12:19 PM ----------
SpaceOctopus said:
I shut it down. Unbrick tool. This time I let it update itself all the way up to the very latest version of OOS.
Click to expand...
Click to collapse
At any point, did you flash a full OOS zip (over 1 GB) and not just update patches? That is where I would start, to make sure it's one a completely stock baseline (including firmware, etc.).
You can get the latest full update zip from here: https://forum.xda-developers.com/oneplus-3t/how-to/official-oxygenos-5-0-1-android-8-0-t3728119
@SpaceOctopus
I would try a newer firmware like the
Stable5.0.8 Firmware+Modem_OnePlus3T.zip
I would also recommend the latest TWRP = twrp-3.3.0-1-oneplus3.img
if still not working definitely flash the flash a full OOS zip from the post above which is 5.0.8
else you should try making the jump to a 9.0 PIE ROM, I see an official and unofficial RR if that is your goto ROM, easy to locate in the [INDEX] ROMs, Kernels & Misc. for 3/3T thread
.
Mizart said:
Did you buy a new unit from somewhere or did you get a second hand unit ? In the latter case, the person who owned the device before you might have replaced the display for whatever reason, replaced displays often run into these kind of issues.
Also, does this happen on all the ROMs ? It seems you're only flashing Nougat roms, It could be that the hardware is not falling in line with the older software (just a guess). Try flashing a newer, latest updated pie rom and see how that works out.
Click to expand...
Click to collapse
Brand new from ebay. Sealed in the box.
I did try flashing a more recent version of resurrection remix, but it failed. Any recommendations?
redpoint73 said:
What does that even mean? Sounds like you are just making stuff up.
---------- Post added at 12:23 PM ---------- Previous post was at 12:19 PM ----------
At any point, did you flash a full OOS zip (over 1 GB) and not just update patches? That is where I would start, to make sure it's one a completely stock baseline (including firmware, etc.).
You can get the latest full update zip from here: https://forum.xda-developers.com/oneplus-3t/how-to/official-oxygenos-5-0-1-android-8-0-t3728119
Click to expand...
Click to collapse
I mean, does using the unbrick tool count? I think it completely flashes everything back to stock. Granted it's a very old version of OOS, but either way I will try that next just in case. Thank you.
hhp_211 said:
@SpaceOctopus
I would try a newer firmware like the
Stable5.0.8 Firmware+Modem_OnePlus3T.zip
I would also recommend the latest TWRP = twrp-3.3.0-1-oneplus3.img
if still not working definitely flash the flash a full OOS zip from the post above which is 5.0.8
else you should try making the jump to a 9.0 PIE ROM, I see an official and unofficial RR if that is your goto ROM, easy to locate in the [INDEX] ROMs, Kernels & Misc. for 3/3T thread
.
Click to expand...
Click to collapse
I did try that TWRP eventually. No change. I would probably have switched to pie a while ago, except one small thing. There's an xposed module I'm really attached to, and as far as I'm aware, xposed isn't available on pie? Or at least that's what I've heard/read. It's the xprivacy lua module that lets you control every type of data an app has access to. I think I've tried looking for an alternative and there aren't any, either. :'( You know, sometimes it's just that one small thing... lol
However, I did try to install the most recent version of RR yesterday, and it failed flashing. Don't know why. I'm going to try again after flashing the firmware. Maybe it'll work this time.
Anyway, I'm also going to try what you all have recommended and see what happens. Hopefully something happens. Thank you much for your help
Ok, well, this time it let me install Resurrection Remix latest version. It may not be exactly what I wanted, but it's pretty goddamn close, and it sure as hell isn't OOS! lol
Thanks for your help everyone! I really appreciate it. I do still really wish I knew wtf was happening honestly with it not properly running nougat ROM's, but hey, this works for me. It won't make me want to toss it in a dumpster and set it on fire every time I pick it up. :laugh: :laugh: :laugh:
Maybe I can get someone to figure it out in the future or something, I don't know. I sure wish someone would convert that xprivacy module to work with Magisk though! I'm surprised nobody has even made an alternative or an app or anything like it really.
SpaceOctopus said:
I mean, does using the unbrick tool count? I think it completely flashes everything back to stock. Granted it's a very old version of OOS, but either way I will try that next just in case.
Click to expand...
Click to collapse
I think the unbrick tool does flash the full OOS. But honestly not 100% sure, as I have never actually had to use the unbrick tool (knock on wood!). Which is one reason I decided to pose that as a question.
In any case, if the unbrick did flash an old OOS, best to replace with newer version (or at least the firmware). Updated firmware typically plays better with the current custom ROMs. And old firmware is often a culprit when random bugs occur after flashing a custom ROM. So again, flashing firmware and/or the full update zip (which also flashes the firmware) is best practice in such cases. And if you are in any doubt about the OOS version or corresponding firmware that was installed, it probably doesn't hurt to flash again.
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
SideSkroll said:
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
Click to expand...
Click to collapse
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
zgfg said:
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
Click to expand...
Click to collapse
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
SideSkroll said:
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
Click to expand...
Click to collapse
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
zgfg said:
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
Click to expand...
Click to collapse
Thank you. Thats exactly what I was looking for. I really appreciateyour help.
Btw, no one should have the "hide extensions for known file types" checkbox marked...
Edit: Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
SideSkroll said:
....Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
Click to expand...
Click to collapse
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
SideSkroll said:
Thats exactly what I was looking for...
Click to expand...
Click to collapse
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
zgfg said:
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
Click to expand...
Click to collapse
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
SideSkroll said:
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
Click to expand...
Click to collapse
This small OTA bringing Patch02 over b540 installs even over TWRP (but that was not the case for OTA from eg b535 to b540)
Cannot discuss/compare battery for Omni Pie, since not using Omni
Problem with Camera app does not show on stock Oreo. Even if the app was somehow ported from Huawei, there are maybe problems with integration to Omni.
Various Huawei/Mate models come with different cameras, but there is only one OK Omni ROM (with one Camera app) given to work on all Huawei/Mate models
Btw, somebody else also complained about issues with Camera (and GPS) and decided to go back to stock Oreo.
Similarly, issues you described about black notifications or so must be related to the custom ROM, theme or so.
As a general rule:
- for installing OK ROM, you flash System partition, and nothing else
- you also wipe Data partitiom (containing all your installed apps, incl Magisk Manager, also containing your user settings)
It does not affect any other partition.
Therefore, changes given by NW patch persist - without, you will have (also in that OK ROMs) problems with SIM card(s) and connecting to the network
Also, Magisk, which was flashed to Ramdisk, persists. You must only install Magisk Manager again, because it is user apo, installed to Data partition that was wiped
You must check on the OK side how they advice installing the updates of OK ROMs
(It is questionable if they will get updates any more, since OK team switched to development of ROMs which install over the stock Pie, whereas on P9 you have no stock Pie - only Oreo, and most likely, we will never see stock Pie for P9.
Just check when OK team released last ROM for stock Oreo, and compare with their releases of OK ROMs for stock Pie:
https://openkirin.net/download/
Hence IMO, for updating the OK ROM (if/when it comes), you will again just need to flash its System and to wipe Data (and then to reinstall user apps like Magisk Manager).
Hopefully, you can backup and restore some apps and settings by Titanium.
Whether you don't need to wipe Data for such update - check from the OK support.
On the Open Kirin site you will find Support pages (Faq, HowTo) and also a link to the live Telegram channel
I'm looking for a good source of firmwares, i know the famous sites but some firmwares doesn't seem to be listed. I know in the time os Samsung KIES there were tools which communicated directly with samsung.
For example these firmware builds for the SM-G975Ux aren't listed on most firmware sites but have the December secutiry update with binary/bootloader version 8: G975USQS8IVL1 and G975USQS8IVL2
All the big sites have ROMs for that phone (same one I have). There is no "Ux" model... it's *U or *U1, with the latter being unlocked. IF you search for U1 ROMs you have many selections, but most get the XAA version which will usually change carriers automatically based on the SIM card.
The latest BL=8 version I see there is https://www.sammobile.com/samsung/g...M-G975U1/XAA/download/G975U1UEU8IWB6/1741280/ which is the February 2023 security update. I believe this is the last one we are getting (but I could be mistaken as there may be 1 more security patch, I don't remember).
There's U U1 0 W F N .... I'm looking for the oldest firmware with binary version 8, but it seems the sites don't show all firmwares available.... i'm looking for the oldest firmware with U8 bootloader (or any compatible bootloader with binary 8 version), i could have a look at all sites and try my luck... but they don't seem to have all data. but like i said i prefer some original source xml files... i saw some url's to original samsung servers but can't find them anymore.
There is already a firmware available with the march update.... but you have to be lucky to find them... i'm looking for original sources. like update.zip's and such
Found the first one....
https://fota-cloud-dn.ospserver.net/firmware/TMB/SM-G975U/version.xml
I'd recommend around sammobile and samfw. These are the two sources I use the most
hey!
after I wanted to update my g973f from "G973FXXUGHVK1" to "G973FXXSGHWC2" (I tried odin 3.13 and odin 3.14) and an error occurred, I can't install anything anymore... recovery and download mode work, and I can also flash the original firmware, but the device no longer boots into the system! even custom roms don't want to boot anymore
Can anybody help me further?
Ben1987 said:
hey!
after I wanted to update my g973f from "G973FXXUGHVK1" to "G973FXXSGHWC2" (I tried odin 3.13 and odin 3.14) and an error occurred, I can't install anything anymore... recovery and download mode work, and I can also flash the original firmware, but the device no longer boots into the system! even custom roms don't want to boot anymore
Can anybody help me further?
Click to expand...
Click to collapse
Do you mind explaining a bit more? Do you mean like that it boots you into recovery only or?
WooBLOATERRRR said:
Do you mind explaining a bit more? Do you mean like that it boots you into recovery only or?
Click to expand...
Click to collapse
if i flash a new rom (whether original or custom rom) nothing happens after the reboot... download mode works too, flashing twrp works too! however, the system boot does not work via twrp either... not even a bootloop, the cell phone does not react at all! the task combination for
Right now I don't even care if I get the original firmware or a custom rom running... I hope I didn't brick it (((
My old device was a G930F, its unbreakable make sure you flash the right rom and wipe data and dalvik cache after flashing.... THis ons is locked so it doesn't have fastboot. My G-930F came with fastboot enabled so you can always fastboot a recovery.img. like TWRP
Did you try to download TWRP from twrp.me and "fastboot boot twrp-3.7.0_9-0-herolte.img" ? it should boot to twrp in fastboot mode (hold volume down + home + power).
Ben1987 said:
if i flash a new rom (whether original or custom rom) nothing happens after the reboot... download mode works too, flashing twrp works too! however, the system boot does not work via twrp either... not even a bootloop, the cell phone does not react at all! the task combination for
Click to expand...
Click to collapse
1. is your KG status is broken?
2. Is your bootloader unlocked?
You know how to flash lineageos through twrp right? and how to use odin?
Maybe flash lineageos to see if everything works.... and then revert to original software. Be sure to wipe cache/dalvik and userdata
DaanNL said:
There's U U1 0 W F N .... I'm looking for the oldest firmware with binary version 8, but it seems the sites don't show all firmwares available.... i'm looking for the oldest firmware with U8 bootloader (or any compatible bootloader with binary 8 version), i could have a look at all sites and try my luck... but they don't seem to have all data. but like i said i prefer some original source xml files... i saw some url's to original samsung servers but can't find them anymore.
There is already a firmware available with the march update.... but you have to be lucky to find them... i'm looking for original sources. like update.zip's and such
Found the first one....
https://fota-cloud-dn.ospserver.net/firmware/TMB/SM-G975U/version.xml
Click to expand...
Click to collapse
Yes, I know there are many other variant firmwares out there, but for a U phone (snapdragon) there is really only U and U1... the rest are incompatible.
There is no "older" firmware with binary 8, because the firmwares are packaged with the proper/compatible binary already. Basically, the "binary" is the bootloader version. On Snapdragon phones, you must have the proper BL/binary to flash, as you already know. You can't interchange the binary/BL with the ROM and security updates because they are not made that way.
The update.zip you're looking for are updates sent by Samsung directly, and they can update the ROM (and Binary) from one stock version to another... but, again, they will update both the binary/BL as well as the ROM, so they can't be broken up to only do one or the other.
It sounds like you're trying to get to an older ROM version (for whatever reason) with an older security patch level as well? Basically, this cannot be done on Snapdragon phones. Once you're on an updated binary/BL, you're stuck there (at least today you are).
WooBLOATERRRR said:
I solved the problem! I had unlocked the bootloader, but I also had to deactivate verity via CMD with twrp+adb "adb disable-verity"
ok i've solved the problem now, but does anyone know why i couldn't even start the original stock roms? Actually, the stock ROM should set everything to factory settings...
Click to expand...
Click to collapse
WooBLOATERRRR said:
1. is your KG status is broken?
2. Is your bootloader unlocked?
Click to expand...
Click to collapse
Thank you for helping so quickly with ideas... I would not have expected such quick help with such an old model, even samsung customer service didn't want to help me yesterday
Ben1987 said:
Thank you for helping so quickly with ideas... I would not have expected such quick help with such an old model, even samsung customer service didn't want to help me yesterday
Click to expand...
Click to collapse
Samsung/apple support in a nutshell
schwinn8 said:
Yes, I know there are many other variant firmwares out there, but for a U phone (snapdragon) there is really only U and U1... the rest are incompatible.
There is no "older" firmware with binary 8, because the firmwares are packaged with the proper/compatible binary already. Basically, the "binary" is the bootloader version. On Snapdragon phones, you must have the proper BL/binary to flash, as you already know. You can't interchange the binary/BL with the ROM and security updates because they are not made that way.
The update.zip you're looking for are updates sent by Samsung directly, and they can update the ROM (and Binary) from one stock version to another... but, again, they will update both the binary/BL as well as the ROM, so they can't be broken up to only do one or the other.
It sounds like you're trying to get to an older ROM version (for whatever reason) with an older security patch level as well? Basically, this cannot be done on Snapdragon phones. Once you're on an updated binary/BL, you're stuck there (at least today you are).
Click to expand...
Click to collapse
I've tried different firmwares, its all about snapdragon. You can also flash SM-G975W parts and other snapdragon variants.... there's a lot of variants out there.
I first upgraded and then downgraded to the parts i wanted and am on a rom now with security patch level December 2022, as long as the binary version is the same there's no problem. I've got the latest modem installed and the oldest firmare and bootloader for the latest binary version, i can upgrade or downgrade my bootloader. I already asked someone before if this was possible and if he could confirm because before i was only able to flash CSC and AP i think.
If there's no updates comming anymore why not downgrade and wait for a new leak
I'm also sure we can unlock the bootloader, i'm trying to make an lposed module. I've installed lspatch and lposed and they work fine for some modules. The bootloader unlock has several prerequisites (properties and such) if i can make it look for other properties or something like that we might get an unlock option. Also it looks for an encrypted file on EFS, if someone with an unlocked samsung phone could copy that file we would be a lot further.
It's called /efs/sec_efs/sktdm_mem/encmembership.txt and should be an encrypted file, also if anyone knows how to set ro properties without root (like a stub before the preference controller starts) this would be very usefull.