HI, How are you all ..
i am new here, last monday i bought xperia x1.
Now the Problem is I am unable to send Text Message (sms) I write message and send but after some time message appear " your message cannot be sent " I Check my Sim Card and try to another mobile and work fine,.. Only Problem in Xperia X1..
Only SMS Problem..
other function work fine,,,
Please solve my problem give me idea or suggestion or any trick
dukhi said:
HI, How are you all ..
i am new here, last monday i bought xperia x1.
Now the Problem is I am unable to send Text Message (sms) I write message and send but after some time message appear " your message cannot be sent " I Check my Sim Card and try to another mobile and work fine,.. Only Problem in Xperia X1..
Only SMS Problem..
other function work fine,,,
Please solve my problem give me idea or suggestion or any trick
Click to expand...
Click to collapse
1st: welcome to xda
I understand you are still on stock rom, did you install other apps? always helpful to add as many details as possible
did you update to latest version via SEUS?
read here and compare your settings
then i read somewhere a hard reset would help (will restore default settings), consider it
cheers
reply`
Thank you sir for reply
Actuelly i am using Windows Mobile first time i dont know about Rom. and i never upgrade mobile..
Last night i reset everything from
Setting --> System --> Clear Storage and enter password 1234 then mobile restart and everything come to default..
So please help me step by step because am new to window mobile.
am very thank full to you.
s
Nobody reply me
100 people view this page but only 1 answer .. no anyone here for help me. bye
don't get impatient and discouraged so fast, the response time is always variable
maybe you get an answer within minutes, maybe you don't get one for various reasons, help here is still optional and not mandatory, that's as it is
some here even have a real life
are you able to connect to internet in general, browse, read, whatever and only SMS don't work or is there a general connection setup problem? I would check that first (if not already done)
do you have a new X1? any idea about installed firmware (aka stock rom, when from SE)?
second thing you should consider is SEUS - the SE Update Service, you dl part of the connect software to your pc (go to SE home, support, select X1, ->update service, dl application) which then enables you to connect to SEUS
try to update to the latest firmware and retry sensing an sms
then drop some feedback
cheers
DrakenKorin said:
don't get impatient and discouraged so fast, the response time is always variable
maybe you get an answer within minutes, maybe you don't get one for various reasons, help here is still optional and not mandatory, that's as it is
some here even have a real life
are you able to connect to internet in general, browse, read, whatever and only SMS don't work or is there a general connection setup problem? I would check that first (if not already done)
do you have a new X1? any idea about installed firmware (aka stock rom, when from SE)?
second thing you should consider is SEUS - the SE Update Service, you dl part of the connect software to your pc (go to SE home, support, select X1, ->update service, dl application) which then enables you to connect to SEUS
try to update to the latest firmware and retry sensing an sms
then drop some feedback
cheers
Click to expand...
Click to collapse
Dear when i update the phone the following error appear !
Code:
The Phone contain manipulated software and is not supported by this application
i am not understand,,,
dukhi said:
Dear when i update the phone the following error appear !
Code:
The Phone contain manipulated software and is not supported by this application
i am not understand,,,
Click to expand...
Click to collapse
I should have asked earlier: is it a used X1? somehow doesn't sound like new...
search for software information, e.g under start - settings - system - about device (location depends on firmware version) and tell me what you find
get the device into bootloader and tell me what's displayed there, sounds like you are not on stock rom anymore
cheers
One simple thing. Did you check the sms service number? Its easy to forget this because nowadays it is common for smartphones (and dumb phones too) to get this number automatically from the sim card. Nonetheless I would check it to make sure you dont fall victim to such a basic detail. You can check it here: Phone\Settings\Services\Mailbox and SMS\
You can look for the correct number on your carrier's website (or you call them).
hello dear friends....I had some strange issue 2 days ago...my apps settings restore to time that I just installed them....
i would to hard reset my phone and it was a good time to doing it...so I did hard reset but after it another problem,call and SMS didn't work....some strange problems,so I Task 29 my phone but it hang on SE logo....
No way,I tried to SEUS my phone and this error appeared....
The Phone contain manipulated software and is not supported by this application
what I suppose to do???
First of all: Don't mess around with things like task 29 if you don't know what they actually do. Task 29 completely erases the rom section of your phone so it's no suprise your phone is no longer able to boot. Now you have to flash another rom in order to use your phone again.
Another remark, the fact that you use tools like task 29 and afterwards you try to use SEUS only confirms that you have no clue what you're actually doing. SEUS only works with original software, as soon as you change to a custom rom or even if you only install hard spl SEUS won't work anymore. So you need to read the corresponding tutorials (hard spl, back to spl, custom roms, task 29) and either get it done the right way or reverse to stock spl and rom. Good luck.
tnx dear friend for ur compelete answer,U are right,my mistake and I appriciate for ur guidence....
I have installed another ROM from SDcard and my problem is solved now,tnx again.....
Hello people,
I would like to ask for some suggestions before buying my first Windows Phone. (preferably a Lumia)
I would like to buy a WP8.1 phone that can be rooted. I am a little bit confused by all these terminology (flashing, rooting, unlocking, jailbreak, etc...) so let me explain what I mean by rooting:
I need full filesystem access, and the ability to run commands on the phone, install additional software.
The phone is strictly for debugging a certain application, It doesn't matter how the phone looks and such, the only thing matters it need to have Windows 8.1 and I have to be able to root it.
Can you please tell me which Windows 8.1 devices can be rooted currently?
Can you please recommend me such device(s) that is 100% rootable?
No Windows Phone can be 100% rooted.
You can use Developer tools to debugging
galaris said:
Hello people,
I would like to ask for some suggestions before buying my first Windows Phone. (preferably a Lumia)
I would like to buy a WP8.1 phone that can be rooted. I am a little bit confused by all these terminology (flashing, rooting, unlocking, jailbreak, etc...) so let me explain what I mean by rooting:
I need full filesystem access, and the ability to run commands on the phone, install additional software.
The phone is strictly for debugging a certain application, It doesn't matter how the phone looks and such, the only thing matters it need to have Windows 8.1 and I have to be able to root it.
Can you please tell me which Windows 8.1 devices can be rooted currently?
Can you please recommend me such device(s) that is 100% rootable?
Click to expand...
Click to collapse
Root is a concept derived from Linux. So little Windows Phone users talk about this. For your purpose, the Widows Developer tools should do the trick.
As per my suggestion.
There is Huawei WP8.0 Device. That you can even unlocked Bootloader or can flash custom ROM. (You can update it to the 8.1 or v10)
Other Samsung/Lumia Device (Having SD-Card Support) can be Interop/Capability unlocked to test high-privileges application. (Pure App Developer Mode)
Any WP 8.0 Supports WP 8.1/WP10*
galaris said:
Hello people,
I would like to ask for some suggestions before buying my first Windows Phone. (preferably a Lumia)
I would like to buy a WP8.1 phone that can be rooted. I am a little bit confused by all these terminology (flashing, rooting, unlocking, jailbreak, etc...) so let me explain what I mean by rooting:
I need full filesystem access, and the ability to run commands on the phone, install additional software.
The phone is strictly for debugging a certain application, It doesn't matter how the phone looks and such, the only thing matters it need to have Windows 8.1 and I have to be able to root it.
Can you please tell me which Windows 8.1 devices can be rooted currently?
Can you please recommend me such device(s) that is 100% rootable?
Click to expand...
Click to collapse
I suggest you a lumia 830, best balance performance and possiblity to hack slot sd card, it's a new series lumia x30 and you can interop ulock it with rom rebuilder or vcreg mods!!
At present, there are no publicly available hacks that I know of for "100% root" on a WP8.x device. Capability unlock - which only requires registry editing - is the closest you can get right now, I think. Interop/capability unlocks typically also mean full file system access - either on-device, via USB, or both - though you may still run into restrictions (for example, you can't edit or delete a file that the OS has a non-shared HANDLE open on).
Samsung phones probably have the most interop/capability-unlock software released for them, but the other options that @djamol suggested above would work too.
theres the developer unlock which gives you more but not 100% root.
as far as is know there is no complete unlock yet for all WP after WP7.
Thank you all, greatly appreciate your input!
I went with Samsung ATIV S !
Brand new here, looking to unlock, root and then flash a standard Android build or custom DeGoogled ROM for my new device. I was looking to find a way to unlock the bootloader to start and found that Huawei have stopped giving out unlock codes and that the info around unlocking wasn't great so I made a note of all my steps as below.
Please let me know if this works for you and if you have any issues, please also read and follow the guidelines carefully as there are lots of things like using all the applications as an administator and changing directories that are important.
I am also looking for a way to install TWRP or another recovery thing on this device so I don't brick it, as I want to root the tablet and muck around with it. Has anyone got any experience of doing this successfully and does anyone have links to methods to create a cloned backup of the standard OS?
This was done on a brand new Mediapad M3 Lite 8 (the Wifi version, not LTE) with Android 7.0, EMUI 5.1, CPN-W09, build CPN-W09C100B251 - BUT will probably work on the LTE version, the non-lite version and the 7 and 10 inch models.
IMPORTANT: This costs money and is done through the DC Unlocker tool, it costs 4 credits (4 euros/dollars) for the Mediapad M3 Lite 8 (Wifi, not LTE) as Huawei now do not offer the bootloader code AT ALL . I have copied/streamlined the steps below that were found as guides originally at the dc unlocker website, check their site guides to find originals.
Step 1 - Developer Options enable
Go to settings, about tablet, tap build number 7 times to unlock developer options
Go to developer options, enable OEM unlock, enable USB debugging
Step 2 - Enable manufacture mode
If your phone has a dialpad, enter dial pad code *#*#2846579#*#*
IF your phone doesn't have a dialpad, go to calculator and enter ()()2846579()()=
This willl take you to a developer menu, select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode".
Step 3 - Install drivers
Connect your Android device to your PC with a usb cable and either install Hisuite from the connected drive that will attach, or download it from the Huawei website by searching for Huawei Hisuite and going to their official website.
To check this has worked, go to Device Manager on your PC and look for Modems - there should be an entry called Android Adapter Modem - if this is not present try disconnecting/reconnecting your device and restarting Hisuite.
Step 4 - Read bootloader code
Download the latest DC Unlocker tool from dc-unlocker dot com and extract it, then AS AN ADMINISTRATOR (right click and Run as Administrator) run the client.exe (was called dc-unlockerclient2.exe)
Click Select Manufacturer dropdown and change to Huawei Phones, not Modems, press the magnifier/search icon at bottom left and your phone info should be found. This should also
Step 5 - Buy credits from the dc unlocker site as a new user, try 4 credits first and then login with these new user details in the dc unlocker application on your PC, this will show your credits and the phone connected as well as the cost. Click the Unlocking icon on the top right and click Read botloader code to get your code. Make a note of this/copy it somewhere.
Step 6 - Go back to the folder that dc unlocker is in
Go into the unzipped folder and then copy the location of this folder by clicking on the address bar in File Explorer and copying this location, you'll have something similar to
C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403
Step 7 - Turn off your phone and turn it back on holding the Vol down and Power buttons to enter fastboot mode, connect your device to your PC
Step 8 - Open cmd by searching for cmd in windows, right click cmd and open it as administrator, you'll get the black and white windows terminal
In the terminal type "cd C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403" (or the path for the latest version of the dc unlocker you have downloaded) without the quotation marks and with YOUR directory path as described above. The command cd just changes directory to the one you give. Your terminal should now show the above directory as the path in which it now sends commands, i.e the > mark is now displayed after the directory path we copied
Step 9 - Type "adb devices" without quotation marks to start the adb daemon
Step 10 - Type "fastboot devices" without quotation marks and you should see a device number with the word fastboot next to it.
Step 11 - Now type "fastboot oem unlock" without the quotation marks, followed by a space and then your bootloader unlock code i.e
fastboot oem unlock XYZ123456789
Step 12 - Your device should show a screen asking you to accept the unlock, then onto another screen where you should press the power key to continue onto booting your factory reset unlocked device.
Step 13 - You might have to disconnect the USB cable and reboot your device now, and you'll set up the device from scratch again - but now the bootloader unlocked, allowing you to load stuff like TWRP if you can find the right version - which I can't right now! :good:
I have also now been able to install TWRP by using the TWRP image specifically for BAH-W09 found on page 17 of the "TWRP (greatslon mod)" in the link provided by pitapart
thread. I can't post links yet which is why I'm typing to source....
I have been trying to flash SuperSU using the latest 2.82 zip but keep getting the error "Extracting Ramdisk - Failure, aborting", which is the same error I'm getting when trying to root using SRKtool, both the 2.1 universal version and the 2.0 Huawei version, using option 1 for Mate P8 or option 6 for systemless.
I've downloaded a system root version of SuperSU (google "supersu system mode", first XDA thread) and flashed using TWRP, it says it has installed but the SuperSU app doesn't show root, and typing "su" in TWRP console doesn't show I can do commands in superuser mode. Can anyone help?
I recently have been purchased the LTE version of this device. Although I cannot try this out currently, I probably will in the future so please keep us updated about your experiments for reference!
avkjbl5bak said:
I have also now been able to install TWRP by using the TWRP image specifically for BAH-W09 found on page 17 of the "TWRP (greatslon mod)" in the link provided by pitapart
thread. I can't post links yet which is why I'm typing to source....
I have been trying to flash SuperSU using the latest 2.82 zip but keep getting the error "Extracting Ramdisk - Failure, aborting", which is the same error I'm getting when trying to root using SRKtool, both the 2.1 universal version and the 2.0 Huawei version, using option 1 for Mate P8 or option 6 for systemless.
I've downloaded a system root version of SuperSU (google "supersu system mode", first XDA thread) and flashed using TWRP, it says it has installed but the SuperSU app doesn't show root, and typing "su" in TWRP console doesn't show I can do commands in superuser mode. Can anyone help?
Click to expand...
Click to collapse
Hi,
Were you ever able to get your Mediapad M3 Lite 8 rooted? I really like this tablet but, need the 5 Ghz wifi band which requires root from everything I have read.
Thanks
howgies said:
Hi,
Were you ever able to get your Mediapad M3 Lite 8 rooted? I really like this tablet but, need the 5 Ghz wifi band which requires root from everything I have read.
Thanks
Click to expand...
Click to collapse
I have my Mediapad M3 Lite rooted by magisk.
I followed the unlock guide and unlocked the bootloader.
I couldn't find my exact firmware I downloaded the most recent one I could find.
I extracted the boot.img with Huawei Update extractor and copied it to my phone.
I download and installed latest magisk app.
I opened the magic app-> install -> install -> patch the boot image file which I then flashed through fastboot.
I then opened magisk -> install -> Direct install.
Everything works but like me you take a risk in not using the exact boot.img.
I tried and installed TWRP which worked but the volume keys would let me run the script I was trying to rebrand the phone. In the end it isn't necessary to root the phone.
sd26 said:
I followed the unlock guide and unlocked the bootloader.
I couldn't find my exact firmware I downloaded the most recent one I could find.
I extracted the boot.img with Huawei Update extractor and copied it to my phone.
Click to expand...
Click to collapse
Very bad idea and advice:
- people often uses wrong firmware or wrong version;
- a boot from a different version can be incompatible, you can be sure only too late!
The right thing is to boot to TWRP then in the console, using "dd" command do a copy of original boot!
nicolap8 said:
Very bad idea and advice:
- people often uses wrong firmware or wrong version;
- a boot from a different version can be incompatible, you can be sure only too late!
The right thing is to boot to TWRP then in the console, using "dd" command do a copy of original boot!
Click to expand...
Click to collapse
Very poor reply, you did not read my post properly, just jumped in to demonstrate your superciliousness. No advice was given and you missed the word risk. More productive use of replying would have been to include the actual command required anyway which is:
dd if=/dev/block/boot-device/by-name/boot of=boot.img
Helping wasn't the point your trying to make.
sd26 said:
Very poor reply, you did not read my post properly, just jumped in to demonstrate your superciliousness. No advice was given and you missed the word risk. More productive use of replying would have been to include the actual command required anyway which is:
dd if=/dev/block/boot-device/by-name/boot of=boot.img
Helping wasn't the point your trying to make.
Click to expand...
Click to collapse
if my reply is too poor, report it to mods...
A post like your IS an advice because people read and follow it. What is wrong is not that you write or my opinion but people behaviour
I read the "risk" word but a lot of people would not. This is also the reason I don't wrote the dd command: search and learn! Most of the messages you read here are of people who have broken their own terminal because just followed a post like your, without knowing what are doing.
N
sd26 said:
Everything works but like me you take a risk in not using the exact boot.img.
Click to expand...
Click to collapse
I see in your first screenshot the fingerprint-id menuentry is gone.... does your fingerprint-sensor working properly ?
I rooted my mediapad m3 lite 10 in the same way, but my boot-image is the right version. ( installed is BAH-W09C100B257, firmware downloaded with the huawei firmware finder app is exactly BAH-W09C100B257) . My fingerprint menuentry is gone too.....and the sensor doesnt work (with the working registered fingerprint before the rooting)
Marc
#marcg# said:
I see in your first screenshot the fingerprint-id menuentry is gone.... does your fingerprint-sensor working properly ?
I rooted my mediapad m3 lite 10 in the same way, but my boot-image is the right version. ( installed is BAH-W09C100B257, firmware downloaded with the huawei firmware finder app is exactly BAH-W09C100B257) . My fingerprint menuentry is gone too.....and the sensor doesnt work (with the working registered fingerprint before the rooting)
Marc
Click to expand...
Click to collapse
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.
sd26 said:
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.
Click to expand...
Click to collapse
I have
avkjbl5bak said:
Brand new here, looking to unlock, root and then flash a standard Android build or custom DeGoogled ROM for my new device. I was looking to find a way to unlock the bootloader to start and found that Huawei have stopped giving out unlock codes and that the info around unlocking wasn't great so I made a note of all my steps as below.
Please let me know if this works for you and if you have any issues, please also read and follow the guidelines carefully as there are lots of things like using all the applications as an administator and changing directories that are important.
I am also looking for a way to install TWRP or another recovery thing on this device so I don't brick it, as I want to root the tablet and muck around with it. Has anyone got any experience of doing this successfully and does anyone have links to methods to create a cloned backup of the standard OS?
This was done on a brand new Mediapad M3 Lite 8 (the Wifi version, not LTE) with Android 7.0, EMUI 5.1, CPN-W09, build CPN-W09C100B251 - BUT will probably work on the LTE version, the non-lite version and the 7 and 10 inch models.
IMPORTANT: This costs money and is done through the DC Unlocker tool, it costs 4 credits (4 euros/dollars) for the Mediapad M3 Lite 8 (Wifi, not LTE) as Huawei now do not offer the bootloader code AT ALL . I have copied/streamlined the steps below that were found as guides originally at the dc unlocker website, check their site guides to find originals.
Step 1 - Developer Options enable
Go to settings, about tablet, tap build number 7 times to unlock developer options
Go to developer options, enable OEM unlock, enable USB debugging
Step 2 - Enable manufacture mode
If your phone has a dialpad, enter dial pad code *#*#2846579#*#*
IF your phone doesn't have a dialpad, go to calculator and enter ()()2846579()()=
This willl take you to a developer menu, select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode".
Step 3 - Install drivers
Connect your Android device to your PC with a usb cable and either install Hisuite from the connected drive that will attach, or download it from the Huawei website by searching for Huawei Hisuite and going to their official website.
To check this has worked, go to Device Manager on your PC and look for Modems - there should be an entry called Android Adapter Modem - if this is not present try disconnecting/reconnecting your device and restarting Hisuite.
Step 4 - Read bootloader code
Download the latest DC Unlocker tool from dc-unlocker dot com and extract it, then AS AN ADMINISTRATOR (right click and Run as Administrator) run the client.exe (was called dc-unlockerclient2.exe)
Click Select Manufacturer dropdown and change to Huawei Phones, not Modems, press the magnifier/search icon at bottom left and your phone info should be found. This should also
Step 5 - Buy credits from the dc unlocker site as a new user, try 4 credits first and then login with these new user details in the dc unlocker application on your PC, this will show your credits and the phone connected as well as the cost. Click the Unlocking icon on the top right and click Read botloader code to get your code. Make a note of this/copy it somewhere.
Step 6 - Go back to the folder that dc unlocker is in
Go into the unzipped folder and then copy the location of this folder by clicking on the address bar in File Explorer and copying this location, you'll have something similar to
C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403
Step 7 - Turn off your phone and turn it back on holding the Vol down and Power buttons to enter fastboot mode, connect your device to your PC
Step 8 - Open cmd by searching for cmd in windows, right click cmd and open it as administrator, you'll get the black and white windows terminal
In the terminal type "cd C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403" (or the path for the latest version of the dc unlocker you have downloaded) without the quotation marks and with YOUR directory path as described above. The command cd just changes directory to the one you give. Your terminal should now show the above directory as the path in which it now sends commands, i.e the > mark is now displayed after the directory path we copied
Step 9 - Type "adb devices" without quotation marks to start the adb daemon
Step 10 - Type "fastboot devices" without quotation marks and you should see a device number with the word fastboot next to it.
Step 11 - Now type "fastboot oem unlock" without the quotation marks, followed by a space and then your bootloader unlock code i.e
fastboot oem unlock XYZ123456789
Step 12 - Your device should show a screen asking you to accept the unlock, then onto another screen where you should press the power key to continue onto booting your factory reset unlocked device.
Step 13 - You might have to disconnect the USB cable and reboot your device now, and you'll set up the device from scratch again - but now the bootloader unlocked, allowing you to load stuff like TWRP if you can find the right version - which I can't right now! :good:
Click to expand...
Click to collapse
Did you ever get and answer to your question about cloning or getting the original factory images. I've been trying on and off for 9months. I have unlocked the bootloader and backed up using TWRP (from the 10inch model), but when I relocked the bootloader everything fell apart... unstable boot loops, etc. not sure if I had to wipe recovery I burned with TWRP or what. Also TWRP does not back-up the data partition I think due to encryption (from other posts I read). My goal was to rebrand a pile of the Chinese version tablets I have to US because we use them in our product, and the US are not available, so rebranding would give me more time before to find a replacement. Any clues would help!!!
sd26 said:
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.
Click to expand...
Click to collapse
I successfully rooted my CPN-L09 without loosing fp sensor, have a look here: https://forum.xda-developers.com/mediapad-m3/help/to-patch-boot-img-magisk-v17-3-t3938629
Hi
im a new member but have been using the site for ages.
my mediapad m3 is also wifi only and im trying to get the code for the bootloader to be unlocked except for the fact that my calculator app isn't scientific enough (lol) to include brackets.
what do I do to get the code or update my calc app?
alex
bigprat9 said:
Hi
im a new member but have been using the site for ages.
my mediapad m3 is also wifi only and im trying to get the code for the bootloader to be unlocked except for the fact that my calculator app isn't scientific enough (lol) to include brackets.
what do I do to get the code or update my calc app?
alex
Click to expand...
Click to collapse
You have to use the calculator in landscape mode (turn on auto-rotate) and then the bracket buttons will appear.
So I finally got around to installing this on my stock version. I found 16GB was too limiting and I was hoping to use the SD card to expand the space so I could use it for a few more years. I purchased the code from DC_unlocker.
A couple of things I noticed while following the guide. To enter fastboot mode, holding down the volume down and power button doesn't seem to work. What you to do is while it's off, hold down the volume down button and plug in the microusb cable, while continuing to hold it down. You could also enter fastboot using an ADB command.
Also I couldn't wipe anything before installing the new roms, I got error messages. I'm not sure what that means. Anyways after installing android 9, it seemed to take a very long time to first boot. The graphic animation is going, but I wasn't sure if it was working so I hard reset once, tried to boot again and then waited again, hard reset again and put it down thinking I would have to look into the error messages and when I came back it was up and running.
Hi, I'm hoping someone can help me out here.
A few days ago, I followed the instructions unlocking the bootloader of my Mediapad M3 lite 8 (CPN-W09) and sure enough, I successfully unlocked the bootloader. However I've now run into another problem - I cannot get the FRP on the tablet to be unlocked!
Nothing I've tried seems to get it to unlock. The (only) Google account used on the tablet has been my own, and it's been no problem signing back into my account when factory resetting the tablet. One time when investigating it, after a factory reset it did say that it was "restricted" but again, adding my Google account details on the setup was no issue, but even after then deleting the account (which, if I'm right, should set FRP to "unlocked") when I enter into fastboot mode it still shows FRP as locked! And it shows it no matter what I do, wherever the Google account is "active" on the tablet or not, and the last four or five times I've did a factory reset with both data and cache partition wipes done and nothing budges. I think I'm at a lost cause here - the "OEM Unlock" option in the developer settings is totally greyed out. ?
Of course, the tablet is still "usable" but there is no way to carry out special functions after unlocking the bootloader, like rooting, install TWRP, custom ROM etc. and it just kinds of stands in a limbo.
I've tried searching here on XDA and the web in general, high and low, to see if this problem has affected anyone else, and strangely it doesn't seem to happen to anyone else!
For the record, I've also tried hardreset.info's FRP unlock tool which claimed to be successful, but it clearly wasn't!
I hope someone out there might have a solution to my woe - as I think I've partially crippled by M3 Lite 8 otherwise by trying to unlock the bootloader.
lawhec said:
Hi, I'm hoping someone can help me out here.
A few days ago, I followed the instructions unlocking the bootloader of my Mediapad M3 lite 8 (CPN-W09) and sure enough, I successfully unlocked the bootloader. However I've now run into another problem - I cannot get the FRP on the tablet to be unlocked!
Nothing I've tried seems to get it to unlock. The (only) Google account used on the tablet has been my own, and it's been no problem signing back into my account when factory resetting the tablet. One time when investigating it, after a factory reset it did say that it was "restricted" but again, adding my Google account details on the setup was no issue, but even after then deleting the account (which, if I'm right, should set FRP to "unlocked") when I enter into fastboot mode it still shows FRP as locked! And it shows it no matter what I do, wherever the Google account is "active" on the tablet or not, and the last four or five times I've did a factory reset with both data and cache partition wipes done and nothing budges. I think I'm at a lost cause here - the "OEM Unlock" option in the developer settings is totally greyed out. ?
Of course, the tablet is still "usable" but there is no way to carry out special functions after unlocking the bootloader, like rooting, install TWRP, custom ROM etc. and it just kinds of stands in a limbo.
I've tried searching here on XDA and the web in general, high and low, to see if this problem has affected anyone else, and strangely it doesn't seem to happen to anyone else!
For the record, I've also tried hardreset.info's FRP unlock tool which claimed to be successful, but it clearly wasn't!
I hope someone out there might have a solution to my woe - as I think I've partially crippled by M3 Lite 8 otherwise by trying to unlock the bootloader.
Click to expand...
Click to collapse
You could try to lock bootloader back, and before to unlock bootloader again, first just unlock OEM .
surdu_petru said:
You could try to lock bootloader back, and before to unlock bootloader again, first just unlock OEM .
Click to expand...
Click to collapse
I did try this at the time, and I couldn't get it to work. But I had another try at it yesterday and I managed to get the bootloader locked again, toggle OEM unlock to "off" and unlocked the bootloader once more and it worked!
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
I used to do some rooting previously with Android handsets in the past, but the last time was two years ago (rooting & upgrading an Alcatel handset to Android 6.0) and FRP was new to me, throwing me off.
I've donated some Euros to you as an appreciation for your work & advice. Merci beaucoup!
lawhec said:
I did try this at the time, and I couldn't get it to work. But I had another try at it yesterday and I managed to get the bootloader locked again, toggle OEM unlock to "off" and unlocked the bootloader once more and it worked!
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
I used to do some rooting previously with Android handsets in the past, but the last time was two years ago (rooting & upgrading an Alcatel handset to Android 6.0) and FRP was new to me, throwing me off.
I've donated some Euros to you as an appreciation for your work & advice. Merci beaucoup!
Click to expand...
Click to collapse
Thank you very much too
Hello
I followed the steps here to unlock the bootloader with my btv-dl09, that worked fine even its not lite.. :fingers-crossed:
but now, any clues? may i ll try the way of lawhec with
lawhec said:
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
Click to expand...
Click to collapse
but cant find the TWRP 3.3.1-1?
may u Mean
[Recovery][Official] TWRP 3.3.1-10 [G97*0][Snap][3.Jan.20]
[Recovery][Official] TWRP 3.3.1-12 Snapdragon [N97x0][10.Nov.19]
[RECOVERY][ROOT]TWRP 3.3.1-1 Galaxy J6+/J610F/FN/G/DS
???
if so, why u choose one of these? No Clue for me^^ plz let me know
greetz
ADD: just found
Developed By :letschky
twrp-3.1.1-1-next.img
Jul 13, 2017 | 03:32PM
maybe these? looks pretty old but still working? Oo