Related
Help with D405n bootloader and stock recovery
Ok, so I am completely new to the rooting, bootloader and recovery community, and Android in general. I was trying to unlock my bootloader, following an XDA tutorial, on how to do it on all "LG L90 varients". It was an old post, from 2014. I hard bricked my phone, waited a long time for someone to be able to help, and thankfully someone referred me to a very helpful post on how to unbrick LG L90's. So now I am unbricked, I rerooted my phone, and trying to install the Cyanogen ROM. I believe my phone still has the stock recovery and the bootloader is locked. After about an hour of searching, I found nothing helpful. So I want to know if anyone can help me. I want to unlock my bootloader and change my recovery. I don't know what I have to do first, and don't know how. Here is some info on my phone which may be helpful.
Android version: 5.0.2 (Lollipop)
Kernal version: 3.4.0+
Software version: V20a-OP1-SI
LG D405n L90
Firmware: VUK/Virgin Mobile (United Kingdom) V20a
Please reply in a noob friendly way, so I understand. Thank you.
Check this link for instructions for unlock boot loader and install custom recovery but don't use its files because you are in version 20a (android 5.02) and they maybe outdated:
http://forum.xda-developers.com/showthread.php?t=2839690
Go here for updated custom recovery and check some posts down for aboot for 20a
http://forum.xda-developers.com/showthread.php?t=2826150
Don't forget to read well the posts and don't make any mistake or you may brick your phone again.
Good luck [emoji1]
Warimation said:
Check this link for instructions for unlock boot loader and install custom recovery but don't use its files because you are in version 20a (android 5.02) and they maybe outdated:
http://forum.xda-developers.com/showthread.php?t=2839690
Go here for updated custom recovery and check some posts down for aboot for 20a
http://forum.xda-developers.com/showthread.php?t=2826150
Don't forget to read well the posts and don't make any mistake or you may brick your phone again.
Good luck [emoji1]
Click to expand...
Click to collapse
I saw it before, which is how I bricked my phone, using the wrong version. However I found a v20a download on some cyanmod.pl forum, went with Cyanogen, hated it so went back to stock, lol. Anyway, thank you for the help.
Why the CM hate?
Can you pls share why did you hate it? Currently I am in process of figuring out how get custom rom on my d405n v20a, but from what you say, maybe I should stop trying. But I cannot imagine something can be worse than L90 Lollipop...
TRBiteMyFury said:
I saw it before, which is how I bricked my phone, using the wrong version. However I found a v20a download on some cyanmod.pl forum, went with Cyanogen, hated it so went back to stock, lol. Anyway, thank you for the help.
Click to expand...
Click to collapse
Hello! I would like to ask you for a favor. Could you pretty please explain to me how you unbricked your device the first time? I did the exact same mistake and used the wrong version in that post Now my device doesn't display anything, except when I plug it into the computer or to the charger without the battery on it. Also I see a 63,9 MB drive when I plug the phone into the pc. I believe you experienced the same things since we did the same mistake. So please help me, it's my only phone and I really want it back :crying: If it's a big and hard process, then just give me the links you used to find the instructions/solution. Thanks for your time and I count on you!
Lazgeor said:
Hello! I would like to ask you for a favor. Could you pretty please explain to me how you unbricked your device the first time? I did the exact same mistake and used the wrong version in that post Now my device doesn't display anything, except when I plug it into the computer or to the charger without the battery on it. Also I see a 63,9 MB drive when I plug the phone into the pc. I believe you experienced the same things since we did the same mistake. So please help me, it's my only phone and I really want it back :crying: If it's a big and hard process, then just give me the links you used to find the instructions/solution. Thanks for your time and I count on you!
Click to expand...
Click to collapse
Hey, Lazgeor. I'm really sorry for the late reply. If you still have the same problem, here is the reply that I followed: http://forum.xda-developers.com/showpost.php?p=61808443&postcount=9
Make sure you have the right LOADER.img file. Take your battery out and whatever it says on the label is your phone model, if it's an LG L90 D410 then you can download the LOADER.img file from the reply, if not you can Google the right LOADER.img for your phone.
If you brick it even hard to where it only shows in Device Manager under "Ports (COM and LPT)" I can also show you what thread I followed. You loose everything when it gets bricked but you might be lucky if you had a gmail signed in with auto-sync on. It should recover most data such as app data, photos, etc.
TRBiteMyFury said:
Hey, Lazgeor. I'm really sorry for the late reply. If you still have the same problem, here is the reply that I followed: http://forum.xda-developers.com/showpost.php?p=61808443&postcount=9
Make sure you have the right LOADER.img file. Take your battery out and whatever it says on the label is your phone model, if it's an LG L90 D410 then you can download the LOADER.img file from the reply, if not you can Google the right LOADER.img for your phone.
If you brick it even hard to where it only shows in Device Manager under "Ports (COM and LPT)" I can also show you what thread I followed. You loose everything when it gets bricked but you might be lucky if you had a gmail signed in with auto-sync on. It should recover most data such as app data, photos, etc.
Click to expand...
Click to collapse
Hello! Thanks for your reply I found that reply about a month ago as I was searching desperately to find a solution about my phone. Thankfully it worked and since then my phone has been working perfectly. However, my IMEI number became 0 after that tutorial, but I found a solution about that too in another post (after I asked for help first ). It's here for people who are wondering: http://forum.xda-developers.com/lg-l90/help/lost-imei-device-t3285130 Thanks for posting me this message. I may have fixed my problem but others have not and it will help them!
Hello everyone!
I have a bricked qhs dload 9008 LG G4 ls991 and I've been searching in the past five months a method to unbrick this phone via usb.
I found a post in a forum that it seem that they unbrick one of this phone, the only problem "the forum it's totally in russian". I use google translate and think I got the idea. I let you the link if someone has the same problem and want to try the solution
http://4pda.ru/forum/index.php?showtopic=676146&st=5400#entry54915015
I'll give a try with my phone
Joc1890 said:
Hello everyone!
I have a bricked qhs dload 9008 LG G4 ls991 and I've been searching in the past five months a method to unbrick this phone via usb.
I found a post in a forum that it seem that they unbrick one of this phone, the only problem "the forum it's totally in russian". I use google translate and think I got the idea. I let you the link if someone has the same problem and want to try the solution
http://4pda.ru/forum/index.php?showtopic=676146&st=5400#entry54915015
I'll give a try with my phone
Click to expand...
Click to collapse
did this work
i was under the understanding to this day that a octoplus box with jtag was the only way to fix this device
i havnt had a g4 in a few months so things may have changed but last i heard that was the only way
Hi and a very pleasant day. I know this thread may be dated but it's still relevant due to the fact that a lot of users like my self is still facing this problem in 2018. I have an LG G4 LS991 that I have mistakenly downgraded *not knowing the file flashed would be lower version* anyways, I was able to read full flash and have the firmware extracted and saved. The firmware version is "ZVI" which is the latest.
Moreover, I have read in forums where you can do a direct emmc boot repair via sd card. Only thing you wil need is the systemImage.bin file. If you know how to get this or can provide me with some information on how I can etract it for use, then I would happily oblige. email me [email protected]
icoolie said:
Hi and a very pleasant day. I know this thread may be dated but it's still relevant due to the fact that a lot of users like my self is still facing this problem in 2018. I have an LG G4 LS991 that I have mistakenly downgraded *not knowing the file flashed would be lower version* anyways, I was able to read full flash and have the firmware extracted and saved. The firmware version is "ZVI" which is the latest.
Moreover, I have read in forums where you can do a direct emmc boot repair via sd card. Only thing you wil need is the systemImage.bin file. If you know how to get this or can provide me with some information on how I can etract it for use, then I would happily oblige. email me [email protected]
Click to expand...
Click to collapse
Check below link if anything helps...
https://forum.xda-developers.com/tmobile-g4/general/lg-g4-h811-complete-unbrick-guide-100-t3461629
icoolie said:
Hi and a very pleasant day. I know this thread may be dated but it's still relevant due to the fact that a lot of users like my self is still facing this problem in 2018. I have an LG G4 LS991 that I have mistakenly downgraded *not knowing the file flashed would be lower version* anyways, I was able to read full flash and have the firmware extracted and saved. The firmware version is "ZVI" which is the latest.
Moreover, I have read in forums where you can do a direct emmc boot repair via sd card. Only thing you wil need is the systemImage.bin file. If you know how to get this or can provide me with some information on how I can etract it for use, then I would happily oblige. email me [email protected]
Click to expand...
Click to collapse
http://bit.do/unbrick9008
Sent from my LG-H815 using XDA Labs
Please anybody help me, I purchased imported LG G4 T-Mobile H811 10n
I accidentally hard bricked it while flashing MM 20o kdz on low battery and it's totally dead (no download mode, no charging etc) after that I goes to gaffar market Delhi and able to alive my g4 once again.
But after coming home I noticed, that buddy flashed wrong firmware in my phone it flashed h810 MM 20c
Now my phone contains a lot of bugs ( no app is uninstalling, not able to set screen lock pin etc) now I try to flash MM H811 20o by LGUP, but it fails every time after 4% - 7%
Please help me is there anyway to fixed it, can I restored it as I brought lollipop 5.1 H811 10n
Please help
Thank in advance ( and sorry for my bad English)
saranshcrazier said:
Please anybody help me, I purchased imported LG G4 T-Mobile H811 10n
I accidentally hard bricked it while flashing MM 20o kdz on low battery and it's totally dead (no download mode, no charging etc) after that I goes to gaffar market Delhi and able to alive my g4 once again.
But after coming home I noticed, that buddy flashed wrong firmware in my phone it flashed h810 MM 20c
Now my phone contains a lot of bugs ( no app is uninstalling, not able to set screen lock pin etc) now I try to flash MM H811 20o by LGUP, but it fails every time after 4% - 7%
Please help me is there anyway to fixed it, can I restored it as I brought lollipop 5.1 H811 10n
Please help
Thank in advance ( and sorry for my bad English)
Click to expand...
Click to collapse
did you phone had tmobile apps.? maybe its not a h811.? a frankenphone means parts from other phone but motherboard is not h811.
maybe try this.???
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
I'll try it may be it works
I'll try it may be it works
Uppercut not working
I tried it, same pop up at 4% "invalid kdz file", and there is something appearing on download mode "LGL991" etc. Please help
saranshcrazier said:
I tried it, same pop up at 4% "invalid kdz file", and there is something appearing on download mode "LGL991" etc. Please help
Click to expand...
Click to collapse
maybe your phone its not a h811 . only way to make sure is to take out motherboard and read model number in mb plate.
raptorddd said:
maybe your phone its not a h811 . only way to make sure is to take out motherboard and read model number in mb plate.
Click to expand...
Click to collapse
When I saw my hardware info in about phone it shows h810, but in download mode when kdz file flashing failed, mobile shows LGL991 zvb and before all this trouble it is T-Mobile H811 LP. I'm so tired what to do please help
saranshcrazier said:
When I saw my hardware info in about phone it shows h810, but in download mode when kdz file flashing failed, mobile shows LGL991 zvb and before all this trouble it is T-Mobile H811 LP. I'm so tired what to do please help
Click to expand...
Click to collapse
same answer you quote me,
maybe your phone its not a h811 . only way to make sure is to take out motherboard and read model number in mb plate.
raptorddd said:
same answer you quote me,
maybe your phone its not a h811 . only way to make sure is to take out motherboard and read model number in mb plate.
Click to expand...
Click to collapse
I take out motherboard but didn't see any number on it
saranshcrazier said:
I take out motherboard but didn't see any number on it
Click to expand...
Click to collapse
search for a video of G4 dissasembly. your potherboard its still attached in those pics. i beleive its on the other side of that plaque.
Hello everyone,
Im new at Rooting, but I'm good at following instruction from videos, forums, and whatever I get my hands on. I have an LG G4, that I recently rooted. There are some issue with Root, and some applications I cant run (like snapchat- I had tried with Rootswitcher and Magisk but failed).
I followed instructions from several videos and forums here at Xda-Devs. But nothing seems to work. I have download multiple firmwares but everytime i get an error. the lgflashtool14 goes up to 9 % and there is some logs in my phone, but everything stops.
Also I want to mentioned that this are the steps that i rooted
Please any help will be appreciated, I want to go back to stock. :fingers-crossed:
Edit : I have tried all variants of the firmware, some they not even get stuck they say " contact administrator "
An3ru said:
Hello everyone,
Im new at Rooting, but I'm good at following instruction from videos, forums, and whatever I get my hands on. I have an LG G4, that I recently rooted. There are some issue with Root, and some applications I cant run (like snapchat- I had tried with Rootswitcher and Magisk but failed).
I followed instructions from several videos and forums here at Xda-Devs. But nothing seems to work. I have download multiple firmwares but everytime i get an error. the lgflashtool14 goes up to 9 % and there is some logs in my phone, but everything stops.
Also I want to mentioned that this are the steps that i rooted
Please any help will be appreciated, I want to go back to stock. :fingers-crossed:
Edit : I have tried all variants of the firmware, some they not even get stuck they say " contact administrator "
Click to expand...
Click to collapse
why flash other variants? what phone you have,?? why use flashtools and not LGUP try LGUP.
raptorddd said:
why flash other variants? what phone you have,?? why use flashtools and not LGUP try LGUP.
Click to expand...
Click to collapse
Hey Raptorddd,
I have a LG G4 h811. And i been trying using LGUp but when i plug my phone under model it says "unlnown". I been trying to fix with but with no solution. Well other t mobile variants i meant there are like 4 out there and i have different errors.
An3ru said:
Hey Raptorddd,
I have a LG G4 h811. And i been trying using LGUp but when i plug my phone under model it says "unlnown". I been trying to fix with but with no solution. Well other t mobile variants i meant there are like 4 out there and i have different errors.
Click to expand...
Click to collapse
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
raptorddd said:
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
Click to expand...
Click to collapse
Hey man, I followed your instructions, and in one side of the motherboard says, EAX #####501_h810_main_1.0. Would that be the firmware im looking for.??
*edit : its weird since I look up the H810 is a ATT, but I got this Phone in Tmobile
*edit 2: by dialing *#*#244773825625#*#* it gives me this - HW version Rev1.0 - Factory Version LGH811AT-01-V20r-310-260-jan-11-2017-arb03-SW ORIGINAL VERSION *same as the factory version*- Anti rollback version 3-
An3ru said:
Hey man, I followed your instructions, and in one side of the motherboard says, EAX #####501_h810_main_1.0. Would that be the firmware im looking for.??
*edit : its weird since I look up the H810 is a ATT, but I got this Phone in Tmobile
*edit 2: by dialing *#*#244773825625#*#* it gives me this - HW version Rev1.0 - Factory Version LGH811AT-01-V20r-310-260-jan-11-2017-arb03-SW ORIGINAL VERSION *same as the factory version*- Anti rollback version 3-
Click to expand...
Click to collapse
go by what the motherboard says.. if you got it from tmobile return it.
yes seems yours its a att 810
motherboard is what determines your variant other things can be edited but not that number and printing on mitherboard
yes weird they might be refurbishing phone using other motherboards
raptorddd said:
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
Click to expand...
Click to collapse
Well I got it more than a year, unfortunately. Also I tried LGup and it gets the port and what software Im using, But model says unknown. I want to select the phone, but first i have to select the model, is there any fix in this situation?!
raptorddd said:
go by what the motherboard says.. if you got it from tmobile return it.
yes seems yours its a att 810
motherboard is what determines your variant other things can be edited but not that number and printing on mitherboard
yes weird they might be refurbishing phone using other motherboards
Click to expand...
Click to collapse
Ok, but i might not be able to return it since its past the year. And with LGup I open the software and states that MODEL "unknown" and gets the COM port and the software im runing in a small window. Is there any fix for it, that you know of?.
An3ru said:
Well I got it more than a year, unfortunately. Also I tried LGup and it gets the port and what software Im using, But model says unknown. I want to select the phone, but first i have to select the model, is there any fix in this situation?!
Click to expand...
Click to collapse
do you have the h810 KDZ .? not sure i can help much more.. maybe try in the KDZ go back to stock thread or do search..
or try updating this files
https://forum.xda-developers.com/showpost.php?p=73631178&postcount=931
raptorddd said:
do you have the h810 KDZ .? not sure i can help much more.. maybe try in the KDZ go back to stock thread or do search..
or try updating this files
https://forum.xda-developers.com/showpost.php?p=73631178&postcount=931
Click to expand...
Click to collapse
I have it, but I attempt to flash it with lgflashtools and still stuck at 9%. Also tried LGup, and still im unable to do anything with that program
I want to Upgrade My T mobile G4 h81110o LP to MM But I dont know Which Rom I should Flash With LGUP
Iam Searching More Information About h81110o But No One seems Have the same Software version With me
And 1 more question My Phone Is already sim unlocked If i flash MM KDZ With LGUP Is it will sim pocket my phone ?
Pls Help me Here Guys
QuantumDroid said:
I want to Upgrade My T mobile G4 h81110o LP to MM But I dont know Which Rom I should Flash With LGUP
Iam Searching More Information About h81110o But No One seems Have the same Software version With me
And 1 more question My Phone Is already sim unlocked If i flash MM KDZ With LGUP Is it will sim pocket my phone ?
Pls Help me Here Guys
Click to expand...
Click to collapse
assuming you have a ral h811. as i dont know your version...
theres is antirollback in our phone. if you want to stay in a point where you can switch back and forth from LP to MM flash h81120i thats first MM and thats antirollback V2 if you want to go back to LP flash h811 10n. if you dont care about LP anymore flash latest h81120v.
search it should be around here in this section of r mobile, and you are sim carrier unlock.. flashing any wont lock it back. i have same unlocked carrier. when flashing select refurbished in LG UP
forgot to mention once you flash h81120v or 20o-20p-20q-20r-20s you cant go back to LP.
raptorddd said:
assuming you have a ral h811. as i dont know your version...
theres is antirollback in our phone. if you want to stay in a point where you can switch back and forth from LP to MM flash h81120i thats first MM and thats antirollback V2 if you want to go back to LP flash h811 10n. if you dont care about LP anymore flash latest h81120v.
search it should be around here in this section of r mobile, and you are sim carrier unlock.. flashing any wont lock it back. i have same unlocked carrier. when flashing select refurbished in LG UP
forgot to mention once you flash h81120v or 20o-20p-20q-20r-20s you cant go back to LP.
Click to expand...
Click to collapse
Is it Will not hardbrick or softbrick My h811 10o if i flash 20v I see Another Thread it says if flash the different antirollback Example : i have A V2 And i flash V3 antirollback
Can you Give me A link For the latest and right kdz File for my 10o
I am scared That I Select the wrong Kdz
Should i tick the bin file in LGUP ?
Can you Show me how to Install With LGUP
Thanks :angel:
By the way.. This is my software information
Android = 5.1
Kernel. =3.10.49
Build number = LMY47D-XT
Software version =h81110o
Security software version =MDF v1.1 release 5
QuantumDroid said:
Is it Will not hardbrick or softbrick My h811 10o if i flash 20v I see Another Thread it says if flash the different antirollback Example : i have A V2 And i flash V3 antirollback
Can you Give me A link For the latest and right kdz File for my 10o
I am scared That I Select the wrong Kdz
Should i tick the bin file in LGUP ?
Can you Show me how to Install With LGUP
Thanks :angel:
By the way.. This is my software information
Android = 5.1
Kernel. =3.10.49
Build number = LMY47D-XT
Software version =h81110o
Security software version =MDF v1.1 release 5
Click to expand...
Click to collapse
no it wont.. you are in V2 or V1 you going forward to V3.. now in V3 if you go to V2 then brick. so you are fines as you going to V3.
here is the last KDZ we got from tmobile https://forum.xda-developers.com/tmobile-g4/development/h811-kdz-file-t3607807
you need to unzip KDZ
as for LGUP.. select upgrade....theres a option there with dots to browse for file not sure if its says bin.. you click that to browse the KDZ that you unzipped. once you find it select it.. you should see the KDZ file in there.. then exit LGUP and open it again.. this time tick refurbished and the KDZ should still appear there. you just have to press start and wait till it finishes... NOTE using refurbished will erase all data..
also use a fan next to phone to keep it cool. they get really hot during procedure.
raptorddd said:
no it wont.. you are in V2 or V1 you going forward to V3.. now in V3 if you go to V2 then brick. so you are fines as you going to V3.
here is the last KDZ we got from tmobile https://forum.xda-developers.com/tmobile-g4/development/h811-kdz-file-t3607807
you need to unzip KDZ
as for LGUP.. select upgrade....theres a option there with dots to browse for file not sure if its says bin.. you click that to browse the KDZ that you unzipped. once you find it select it.. you should see the KDZ file in there.. then exit LGUP and open it again.. this time tick refurbished and the KDZ should still appear there. you just have to press start and wait till it finishes... NOTE using refurbished will erase all data..
also use a fan next to phone to keep it cool. they get really hot during procedure.
Click to expand...
Click to collapse
Alright so first I open LGUP , i select upgrade Then Browse the kdz file
Exit and reopen lgup but I Select refurbished now
Should I tick The bin file Besides the kdz file when I reopen it or before reopen it ?
Btw, How to unzip The kdz file?
It's Just a flat .kdz
Should I put my G4 in download mode before starting ?
And Just in case LgUP doesnt recognize my device what should I do ?
QuantumDroid said:
Alright so first I open LGUP , i select upgrade Then Browse the kdz file
Exit and reopen lgup but I Select refurbished now
Should I tick The bin file Besides the kdz file when I reopen it or before reopen it ?
Btw, How to unzip The kdz file?
It's Just a flat .kdz
Should I put my G4 in download mode before starting ?
And Just in case LgUP doesnt recognize my device what should I do ?
Click to expand...
Click to collapse
on LGUP if the bin file is where you browse for file only you need to find KDZ file once select and no need to select any other time .just once exit and no need to select. as it will show you in the path there..
file is h811v20.zip i meant to unzip with winrar or 7zip. to extract h811v20 xxxx.kdz. so you can find file in LGUP.
remove battery .. place battery back when phone is off press vol up
then insert USB keep pressing till a window shows in lg g4 in doenload mode.. then open LGUP. then start if you already have select it kdz file and exited and selected refurbished . then start. i do this 1 a month so its all safe. just keep phone cool with fan close by.
raptorddd said:
on LGUP if the bin file is where you browse for file only you need to find KDZ file once select and no need to select any other time .just once exit and no need to select. as it will show you in the path there..
file is h811v20.zip i meant to unzip with winrar or 7zip. to extract h811v20 xxxx.kdz. so you can find file in LGUP.
remove battery .. place battery back when phone is off press vol up
then insert USB keep pressing till a window shows in lg g4 in doenload mode.. then open LGUP. then start if you already have select it kdz file and exited and selected refurbished . then start. i do this 1 a month so its all safe. just keep phone cool with fan close by.
Click to expand...
Click to collapse
Alright I am Gonna Start The Process Tomorrow
Hopefully It works With no Problem
QuantumDroid said:
Alright I am Gonna Start The Process Tomorrow
Hopefully It works With no Problem
Click to expand...
Click to collapse
it should.. good luck.
raptorddd said:
it should.. good luck.
Click to expand...
Click to collapse
it works now iam on android 6.0
but the worst part is my sim is now locked
what should i do man ?
help !!! :crying:
QuantumDroid said:
it works now iam on android 6.0
but the worst part is my sim is now locked
what should i do man ?
help !!! :crying:
Click to expand...
Click to collapse
first i have unlocked carrier so i can use any sim..
second ive flashed lollipop 10n and all the others v20i-20o-20p-20q-20r-20s-20v and despacito rom N neither locked my carrier or sim..
how long have you had this phone.. i dont know.. do a search as i have not encounter this. search to see what you can find.. like i say ive always done this and my sim if you mean now you insert your sim card and its not registering network.. mine always worked.
raptorddd said:
first i have unlocked carrier so i can use any sim..
second ive flashed lollipop 10n and all the others v20i-20o-20p-20q-20r-20s-20v and despacito rom N neither locked my carrier or sim..
how long have you had this phone.. i dont know.. do a search as i have not encounter this. search to see what you can find.. like i say ive always done this and my sim if you mean now you insert your sim card and its not registering network.. mine always worked.
Click to expand...
Click to collapse
I bought This phone 1 month Ago
I dont know what to do now :crying:
QuantumDroid said:
I bought This phone 1 month Ago
I dont know what to do now :crying:
Click to expand...
Click to collapse
Did you solve it?
Same with me
Just A Quick Update
I have Switched My h811 To H815T (Hongkong)
Iam Not using H811 anymore
Btw Iam on latest marshmallow now
Very Happy with my h815t
QuantumDroid said:
Just A Quick Update
I have Switched My h811 To H815T (Hongkong)
Iam Not using H811 anymore
Btw Iam on latest marshmallow now
Very Happy with my h815t
Click to expand...
Click to collapse
Is it possible to upgrade from H811 to H815t? Or you mean you exchanged your H811 to H815t.. Am having the same issue with my H81110o and flashed with h811v20r. Now the phone is messed up, sim locked, no sound, camera not working and I can't afford another phone at the moment..
Stanwizzy said:
Is it possible to upgrade from H811 to H815t? Or you mean you exchanged your H811 to H815t.. Am having the same issue with my H81110o and flashed with h811v20r. Now the phone is messed up, sim locked, no sound, camera not working and I can't afford another phone at the moment..
Click to expand...
Click to collapse
I exchange my phone with the new one :v