Database Develop

P9 bricked please help

Hi Guys,
My friend bricked his phone. Im trying to recover it. Its a VNS-L21.
I tried putting the stock rom on it using dload method from
https://boycracked.com/2016/09/13/official-huawei-p9-lite-vns-l21-stock-rom/amp/
and
http://huafirmware.com/8-firmware/16-huawei-p9-lite-vns-l21
but the upgrade fails everytime saying incompatible.
any help is appreciated :fingers-crossed:

My fix for the issue
malikusmanrasheed said:
Hi Guys,
My friend bricked his phone. Im trying to recover it. Its a VNS-L21.
I tried putting the stock rom on it using dload method from
https://boycracked.com/2016/09/13/official-huawei-p9-lite-vns-l21-stock-rom/amp/
and
http://huafirmware.com/8-firmware/16-huawei-p9-lite-vns-l21
but the upgrade fails everytime saying incompatible.
any help is appreciated :fingers-crossed:
Click to expand...
Click to collapse
Hey man, I got a problem just like you and this is the way I fixed it.
Download the Huawei update extractor:
https://forum.xda-developers.com/showthread.php?t=2433454
And use this to open your Update.app you already downloaded.
Extract the 'boot.img' and the 'system.img'.
Now you need fastboot, follow this tutorial:
https://www.xda-developers.com/xda-...tall-adb-and-fastboot-system-wide-in-windows/
Now open terminal/cmd/powershell and open the folder the boot.img and system.img you extracted are in.
Connect your phone in fastboot and run the following commands:
fastboot flash system [Extracted_System.Img]
fastboot flash boot [Extracted_Boot.img]
fastboot reboot
This resolved the issue for me, I hope also for you!

JatanX said:
Hey man, I got a problem just like you and this is the way I fixed it.
Download the Huawei update extractor:
https://forum.xda-developers.com/showthread.php?t=2433454
And use this to open your Update.app you already downloaded.
Extract the 'boot.img' and the 'system.img'.
Now you need fastboot, follow this tutorial:
https://www.xda-developers.com/xda-...tall-adb-and-fastboot-system-wide-in-windows/
Now open terminal/cmd/powershell and open the folder the boot.img and system.img you extracted are in.
Connect your phone in fastboot and run the following commands:
fastboot flash system [Extracted_System.Img]
fastboot flash boot [Extracted_Boot.img]
fastboot reboot
This resolved the issue for me, I hope also for you!
Click to expand...
Click to collapse
Hi Jatan,
Thanks for the reply. I tried that as well with a couple of stock images but all i got was a blank screen. Can you share the stock image that you used?
:good:

for most Stock images when i try to "Fastboot flash system d:\System.img" ( system.img is in D: in my case), i get this error
FAILED (remote: sparse flash write failure)

malikusmanrasheed said:
for most Stock images when i try to "Fastboot flash system d:\System.img" ( system.img is in D: in my case), i get this error
FAILED (remote: sparse flash write failure)
Click to expand...
Click to collapse
How did he brick it? What was he specifically doing (nougat update etc.)? Do you get the same error when you try and flash a boot image, stock recovery or other partitions?
Can you install twrp? If so, try wiping the system & boot partitions in twrp, then try flashing boot & system again in fastboot. If he'd updated to nougat, then you'll need to try and flash the rollback package first then dload a Marshmallow rom and go from there

I would suggest using this tool:
https://forum.xda-developers.com/p9/development/huawei-p9-eva-l09-eva-l19-eva-l29-tool-t3591358
to install this tool to unlock bootloader and install twrp.
After unlocking your bootloader everything on your phone is gone though.
Then in twrp you can try to repair your your partitians by going to wipe->advanced wipe->repair or change...
And thereafter continue with the steps is provided earlier or install a new rom, this is up to you.
I hope it fixes it for you.

colthekid said:
How did he brick it? What was he specifically doing (nougat update etc.)? Do you get the same error when you try and flash a boot image, stock recovery or other partitions?
Can you install twrp? If so, try wiping the system & boot partitions in twrp, then try flashing boot & system again in fastboot. If he'd updated to nougat, then you'll need to try and flash the rollback package first then dload a Marshmallow rom and go from there
Click to expand...
Click to collapse
Hi colthekid,
He just went nuts and wiped everything he could see in the twrp.
After that I have tried to write this via the method jatan suggested:
VNS-L21C185B360
from http://www.stechguide.com/download-huawei-p9-lite-b360-nougat-update/
still no boot.

JatanX said:
I would suggest using this tool:
https://forum.xda-developers.com/p9/development/huawei-p9-eva-l09-eva-l19-eva-l29-tool-t3591358
to install this tool to unlock bootloader and install twrp.
After unlocking your bootloader everything on your phone is gone though.
Then in twrp you can try to repair your your partitians by going to wipe->advanced wipe->repair or change...
And thereafter continue with the steps is provided earlier or install a new rom, this is up to you.
I hope it fixes it for you.
Click to expand...
Click to collapse
I'l try that and update.

i have twrp. repaired the partitions. did the flast via fast boot using the above method
"Now open terminal/cmd/powershell and open the folder the boot.img and system.img you extracted are in.
Connect your phone in fastboot and run the following commands:
fastboot flash system [Extracted_System.Img]
fastboot flash boot [Extracted_Boot.img]
fastboot reboot"
and still the same. It flashes the files fine. but at boot i get a black screen.
I think im using the wrong files. Can anyone please share the link for a full stock rom nougat , or a roll back from nougat to mm (i flashed this VNS-L21C185B360 latest)

or maybe i need to do write the oeminfo or something. Read it somewhere. not clear on what it is

malikusmanrasheed said:
I think im using the wrong files. Can anyone please share the link for a full stock rom nougat , or a roll back from nougat to mm (i flashed this VNS-L21C185B360 latest)
Click to expand...
Click to collapse
Maybe you need to continue this in the P9 Lite forum?
However, in the meantime, this should help you along!!
Firmware... https://forum.xda-developers.com/hu...huawei-p9-lite-firmware-compilations-t3517124 (pick a full MM rom)
Downgrade... https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932 (partway down first post)

colthekid said:
Maybe you need to continue this in the P9 Lite forum?
However, in the meantime, this should help you along!!
Firmware... https://forum.xda-developers.com/hu...huawei-p9-lite-firmware-compilations-t3517124 (pick a full MM rom)
Downgrade... https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932 (partway down first post)
Click to expand...
Click to collapse
This:
Downgrade... https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932 (partway down first post)
solved my problem.
Putting the puzzle back again:
I think the genius removed the oeminfo along with everything else he could see in the twrp wipe menu.
I tried to put multiple firmwares on the device nougat ( as he updated) but the boot still showed blank.
As soon as i flashed the oeminfo --> then MM firmware, the device booted up.
Thank you so much everyone for your help. Really appreciate it :good::good::good::good::good::good:

Excellent! :good::good:
And I'm sure your friend is glad to have a working phone again!
Explains why dload wouldn't work as well. As far as I'm aware the update.app checks oeminfo to make sure the firmware is compatible. Hence if you want to debrand a phone to C432, you have to flash a C432 oeminfo before the C432 update.app will flash successfully. No oeminfo=no compatibility for anything!!!

hi,
please help unbrick my P9
I can't get into fastboot, the only one thing it boots is the eRecovery, (system partition damaged)
---------- Post added at 04:26 AM ---------- Previous post was at 04:11 AM ----------
konstwww said:
hi,
please help unbrick my P9
I can't get into fastboot, the only one thing it boots is the eRecovery, (system partition damaged)
Click to expand...
Click to collapse
somehow i managed to get to fastboot but trying to flash system get error
sending sparse 'system' (449861 KB)...
OKAY [ 14.749s]
writing 'system'...
FAILED (remote: sparse flash write failure)
finished. total time: 15.142s
Update: To get into fastboot is very important that smartphone is connected via USB to PC, then Power-button and VolumeDown together till Phone gets into fastboot.
from there flash TWRP, and reboot to recovery, after that install full Update (Files and guideline is here in first post part 3 and 4 https://forum.xda-developers.com/p9/development/rom-huawei-p9-magic-rainbow-t3601064).

malikusmanrasheed said:
This:
Downgrade... https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932 (partway down first post)
solved my problem.
Putting the puzzle back again:
I think the genius removed the oeminfo along with everything else he could see in the twrp wipe menu.
I tried to put multiple firmwares on the device nougat ( as he updated) but the boot still showed blank.
As soon as i flashed the oeminfo --> then MM firmware, the device booted up.
Thank you so much everyone for your help. Really appreciate it :good::good::good::good::good::good:
Click to expand...
Click to collapse
Can you please send me your full steps. I really need it

PRA-LX1 I want to install stock firmware.

I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.

I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.

MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.

barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.

barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.

JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".

barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?

barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.

similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.

Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???

Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it

Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.

Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!

juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images

tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/

[TIPS] Revert Custom Rom to Official and untouched - Hard restore

Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
7. Use dload methode for update (hold 3 buttons phone and dont release before "dload screen" appears)
8. Unlock your bootloader again (important!) And make a factory reset
9. Your phone reboot (please wait ) and done!
Ok now you are on official version, please update on setting menu >> update and choice, rest on official or flash a custom rom..
P9 lite brick precision:
In my personal experience the "p9 lite" is very easy to flash, mod or other tips and the risk of HARD brick is very very tiny.
If you see this page and your phone bootloop, relax, keep calm at 99,999% you have a little and ridiculous brick
Good luck and flash happy!

hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD

macao1989 said:
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
Click to expand...
Click to collapse
Yes, is good for you.
Not necessary to re-unlock bootloader.

Therand said:
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
Click to expand...
Click to collapse
I can do everything up to point 6... won't enter to twrp... stays on Your device is now booting...
Update: I can now reach point 7 but now won't do dload (3 buttons) method... Huawei logo all the time. Can't even turn off the phone

In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..

Therand said:
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Click to expand...
Click to collapse
I did update the post... 3 hours ago I wasn't able to enter TWRP, some way I did managed, now I can enter fastboot, I did flash custOEM (sorry I don't remember exactly the name but it's the one of your post) .zip file. Now I can't do dload method, stuck on huawei logo. If I try to go to recovery, I got red message "phone fail validation"...
I know, I post on both but I was trying to do everything...
just tried... validation red error message won't let me go to TWRP now...

You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).

Therand said:
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Click to expand...
Click to collapse
How can I wipe all partitions if stuck in Huawei logo? Is there a way to do everything from adb command line? (I'm using Mac and cannot use all the tools I've found here XDA neither hiSuite which is basically a backup photo/video only the Mac version).
Thank for helping, really appreciate
To answer your question in the other thread, yes bootloader is unlocked and I am on C432.

What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)

Therand said:
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Click to expand...
Click to collapse
Before the bootloop I was on L31C900 (on the phone) but I did actually flashed C432B160 because I did rollback. TWRP used I've found in the other post where there's a OEMfile to flash (but for this I need to double check because I did look so many pages which I am not 100% sure.

I not have experience on other model that C435.
But i suggest to find a oeminfo for your variant (C900?)
For TWRP you need flash a version for MarshMallow HERE
Flash it and pas return here (fastboot flash return and first enter to new recovery)

Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?

islandman75 said:
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
Click to expand...
Click to collapse
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.

Therand said:
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Click to expand...
Click to collapse
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...

islandman75 said:
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
Click to expand...
Click to collapse
I not understand.
You not able to switch on your phone without connected charger?

Therand said:
I not understand.
You not able to switch on your phone without connected charger?
Click to expand...
Click to collapse
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?

islandman75 said:
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
Click to expand...
Click to collapse
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.

Therand said:
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Click to expand...
Click to collapse
I'll try. Thank you

Hi, I followed this guide to go back to stock from elite rom. I flashed my oeminfo.img on twrp and then went to dload combination. Do I have to unlock the bootloader after the reboot? Thanks!

Hi,
I followed your guide and it works perfectly thanks!

bricked device with oreo, old unbrick doesnt work

hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...

after over 10 hours of fiddeling around a found a really easy solution:
most of you know HWOTA helps with this, but the "normal" version wont work after flashing oreo. but this version is flashed via twrp and is still working!
but you will need a oreo compatible twrp, which you can find here
i know the links are to mate 9 software, but since the p10 and mate 9 are nearly identical, it works on the p10 as well

can you post the step by step guide?
i am on oreo 8.0.0.046 and want to flash another version, or downgrade to nougat because few things don't work on this version

i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.

johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
failed install twrp- error find twrp 3.0.3, and i replaced to oero mate 9 recovery....
EDIT: success - problem was on the computer

johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
i did sucsses to install twrp but on the second step, when i press on install on twrp, the phone restart to erocovey and failed to find the files. what am i doing wrong?
i think that i am stuck with that version forever....

if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"

johdost said:
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
Click to expand...
Click to collapse
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks

t.h.i said:
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
Click to expand...
Click to collapse
EDIT : the process is sucsses, but its the same version.... 8.0.0.046

Bricked, no TWRP access, any ideas?
Hi.
I know this about a P10, I have a P10 Plus (VKY-L29C605), but the process should be similar, I think.
I bricked my phone after succesfully upgrading from B174 to B321 using HWOTA. After which I decided, since I was at it, to flash the Hyperplus Kernel. This led to a bootloop. To fix it I decided to just go ahead and HWOTA B321 all over again and get over it, and would have probably gone just fine, except I decided to rebrand (C605 > C432) while I was doing that, silly (no, stupid) mistake. This led to the brick I am currently expriencing, I have no recovery access, erecovery or TWRP.
So now I am left trying to unbrick the phone. I extracted the UPDATE.APP for both update_all_hw.zip and update.zip using the Huawei Extractor Tool with no difficulty, except unbricking methods ask for boot.img, which I could not find, so I went along without it and flashed: cust.img, recovery_ramdisk.img (using fastboot recovery_ramdisk command for Oreo), and system.img. All of the commands completed succesfully, but no shebang, still bricked and no recovery access. I figure this has to do with the rebrand as the result after executing the command "fastboot getvar vendorcountry" shows the rebrand pulled through (hw/eu 432).
I am currently downloading HWOTA8.zip (3GB worth of download) to see if I can do something it. I am also downloading the L29C432B360 OTA-FULL, since I believe I am not getting any progress becuase I used the updates for L29C605B321.
The kind people at funkyhuawei told me they could fix it with their tool, but I don't have the money for that right now.
I will post updates, but any ideas would be greatly appreciated.

Many of us have posted over this in the last couple of days. Seems like Funky Huawei unbrick tool was the mehtod to get it work for me. You could try that!

or use dc-phoenix for me it worked (= in the moment i try to capture the usb ports kommunikation so i have the tool with the aktual firmware longer for 3 days :silly:
would first give dc a try 20 bucks for 3 days is ok i think (=

johdost said:
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
Click to expand...
Click to collapse
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.

So I was able to get the C432B360 firmware and I flashed it, but no I can't enter recovery mode because the battery is low (red lightning bolt/red led flash). Anybody know how to charge or force recovery mode boot from fastboot?

If anyone needs, can use my DC-Phoenix account, I don`t need it anymore.
Your username is: cesedy
Your password is: dnL4eHEm

Greting
ure3808 said:
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
Click to expand...
Click to collapse
Greeting,
Can you explain the procedure of how to do it?
Thank you

soft brick? error [Func NO : 11 (recovery image) Error NO : 2 (load failed!)

Hi guys. I tried to see other threads but I haven't fint anything. Probably there is but I'm beginner and I don't understand so much Anyway this is the problem:
model LLD-L31
build number LLD-L31 8.0.0.133(C432)
FPR unlocked
bootloader unloced
I tried to install root(Magisk-v16.4) in my device. So I unlocked bootloader, installed TWPR(Pretorian80 2.3.1) successfully but this error "Failed to unmount '/system'(Device or resource busy)" appeared. So I try to format data by recovery hoping that it could be able to read partitions after that. I couldn't yet flash file.Zip so I tried to upgrade Twpr in latest version installing it in recovey ramdisk.
After that I'm not able anymore to get into twpr cause this error appered:
[Func NO : 11 (recovery image) Error NO : 2 (load failed!)
Now, I fortunatly turn on the phone, using it with no problems. I can enter in fastboot and eRecovery. I tried to swipe data/reset but the same error appears.
Can I fix it easily? Tell me if you have any tips, thank you:good:

scugnizz said:
Hi guys. I tried to see other threads but I haven't fint anything. Probably there is but I'm beginner and I don't understand so much Anyway this is the problem:
model LLD-L31
build number LLD-L31 8.0.0.133(C432)
FPR unlocked
bootloader unloced
I tried to install root(Magisk-v16.4) in my device. So I unlocked bootloader, installed TWPR(Pretorian80 2.3.1) successfully but this error "Failed to unmount '/system'(Device or resource busy)" appeared. So I try to format data by recovery hoping that it could be able to read partitions after that. I couldn't yet flash file.Zip so I tried to upgrade Twpr in latest version installing it in recovey ramdisk.
After that I'm not able anymore to get into twpr cause this error appered:
[Func NO : 11 (recovery image) Error NO : 2 (load failed!)
Now, I fortunatly turn on the phone, using it with no problems. I can enter in fastboot and eRecovery. I tried to swipe data/reset but the same error appears.
Can I fix it easily? Tell me if you have any tips, thank you:good:
Click to expand...
Click to collapse
Hi, Not familiar with that Version of TWRP, can you link please?
Failure to unmount system usually means you have system set as "read only", try to change within twrp (when you get a working version flashed).
You say you tried to update TWRP to latest edition, exactly what edition did you flash?
Anyway eRecovery will rescue the phone back to when first turned on.

Sparkrite said:
Hi, Not familiar with that Version of TWRP, can you link please?
Failure to unmount system usually means you have system set as "read only",try to change within twrp (when you get a working version flashed).
You say you tried to update TWRP to latest edition, exactly what edition did you flash?
Anyway eRecovery will rescue the phone back to when first turned on.
Click to expand...
Click to collapse
Hi man thank you for your answer.
I flashed this versionhttps://dl.twrp.me/surnia/twrp-3.2.3-0-surnia.img.html
,try to change within twrp (when you get a working version flashed).
Click to expand...
Click to collapse
I can't enter anymore within TWPR, only in stock recovery.

What made you flash that version, where does it say its for the H9L ?
Try either of these, I use V.01 :-
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
Make sure you use the following command "fastboot flash recovery_ramdisk NAME.img"
When flashed, issue "fastboot reboot" while holding down Vol+, when bootloader page blanks immediately remove USB lead and continue to hold Vol+ until TWRP appears.
TWRP may stall for a while on LOGO page, be patient.

What made you flash that version, where does it say its for the H9L ?
Click to expand...
Click to collapse
I'm dumb man that's all:silly:
Anyway it's fixed now, I love you (thanks put, at least).
Failure to unmount system usually means you have system set as "read only",try to change within twrp
Click to expand...
Click to collapse
Last thing if you can..
On mount section the option mount system partition read-only is disactivated but, at opening, error appears in the same way so I don't know how to disable it definitively

Try formatting Data and then reboot to TWRP (recovery).

Man I'm a disaster:crying:
I formatted but I also had the brilliant idea to delete the whole system, without creating any backup by twpr, obviously. So now I have no OS in my device:good:
I had look for stock firmware with Firmware Finder and I have find one whit these files(bottom photo). Which have I to download?
Then I'll probably follow this thread(https://forum.xda-developers.com/9-lite/help/os-installed-t3787136) to continue. Is it right??

At this stage you are probably better off using eRecovery to bring your phone back to full stock.
From off press and hold Vol Up and connect USB, wait for eRecovery and select "Download latest version and recovery".
Needs WiFi.

savior

scugnizz said:
savior
Click to expand...
Click to collapse
Ah Great, good to hear.
Now, go and flash TWRP and Magisk, but follow the instructions EXACTLY !