[ROM][Unofficial][7.1.2]Resurrection Remix-N 5.8.5[X3c50][Alpha] - Lenovo Vibe X3 ROMs, Kernels, Recoveries, & Other

Resurrection Remix Unofficial for Lenovo Vibe X3
About Resurrection Remix:
Resurrection Remix Rom is based on LineageOS, SlimRom, OmniRom and Original Remix Rom Builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
Many things from the previous versions were tweaked with mods, are now included by default in the Rom. So, Enjoy!​
What's working :
Boots
RIL (Calls, SMS, Data)
Camera
Fingerprint
Wi-Fi
Bluetooth
Video Playback
Audio
Sensors
LED
GPS
NFC
MIC (Thanks to Edgard McQueen for telling me correct ACDB ID's)
MTP (only works with USB Debugging as for now)
Not Working :
Call Echo on receiver side
IR
Video Recording (works with OpenCamera but only till 1080p)
Install Instructions :
1. Download the Latest Build RR 5.8.5
2. reboot to recovery.
3. Flash RR 5.8.5
4. Flash Gapps
5. Reboot
6. Enjoy!
Download
RR-5.8.5​

Doubt
Does this rom have all the features of the stock rom like.Dolby Atmos,VR etc

Belram said:
Does this rom have all the features of the stock rom like.Dolby Atmos,VR etc
Click to expand...
Click to collapse
No, this is based on AOSP and will not have Vibe UI specific features.
---------- Post added at 12:33 PM ---------- Previous post was at 12:32 PM ----------
supersayan1000 said:
Resurrection Remix Unofficial for Lenovo Vibe X3​
About Resurrection Remix:
Resurrection Remix Rom is based on LineageOS, SlimRom, OmniRom and Original Remix Rom Builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
Many things from the previous versions were tweaked with mods, are now included by default in the Rom. So, Enjoy!
Not Working :
Camera
Mic
IR
Install Instructions :
1. Download the Latest Build RR 5.8.5
2. reboot to recovery.
3. Flash RR 5.8.5
4. Flash Gapps
5. Reboot
6. Enjoy!
Download
RR-5.8.5​
Click to expand...
Click to collapse
Will this also work for Indian version of Vibe X3 (x3a40)?

Belram said:
Does this rom have all the features of the stock rom like.Dolby Atmos,VR etc
Click to expand...
Click to collapse
I'll add Dolby once it's stable

Belram said:
Does this rom have all the features of the stock rom like.Dolby Atmos,VR etc
Click to expand...
Click to collapse
anantharam said:
No, this is based on AOSP and will not have Vibe UI specific features.
---------- Post added at 12:33 PM ---------- Previous post was at 12:32 PM ----------
Will this also work for Indian version of Vibe X3 (x3a40)?
Click to expand...
Click to collapse
Haven't got time to try it on row rom, I think it'll work if you use Chinese twrp by wzsx

Possible solution of the infrared port, via init.d script, need to check:
#!/system/bin/sh
chown system:system /sys/class/leds/infrared/transmit
chown system:system /sys/class/leds/infrared/brightness

I just used the Chinese twrp and installed this ROM in x3 a40 but it does not boot up.
Any solutions

Nizam Fa said:
I just used the Chinese twrp and installed this ROM in x3 a40 but it does not boot up.
Any solutions
Click to expand...
Click to collapse
flash Chinese rom first, 1626

Edgard.McQueen said:
flash Chinese rom first, 1626
Click to expand...
Click to collapse
Can you give me the link

Nizam Fa said:
Can you give me the link
Click to expand...
Click to collapse
pan.baidu.com/s/1dFeWzPB?errno=0&errmsg=Auth%20Login%20Sucess&&bduss=&ssnerror=0&traceid=#list/path=%2F存档%2FLenovo_X3%2FX3c50线刷工具和线刷包&parentPath=%2F存档
drive.google.com/file/d/0BwE3vM3IGxkPejBNcUlCeW1XRkE/view
please read instruction for flash chinese rom on x3a40

Edgard.McQueen said:
pan.baidu.com/s/1dFeWzPB?errno=0&errmsg=Auth%20Login%20Sucess&&bduss=&ssnerror=0&traceid=#list/path=%2F
Click to expand...
Click to collapse

Edgard.McQueen said:
flash Chinese rom first, 1626
Click to expand...
Click to collapse
Dirty flash over 1626?

Predator_XxX said:
Dirty flash over 1626?
Click to expand...
Click to collapse
lol no, I updated the ROM and fixed mic, I think you'll be able to flash it on X3a40 now :silly:

supersayan1000 said:
lol no, I updated the ROM and fixed mic, I think you'll be able to flash it on X3a40 now :silly:
Click to expand...
Click to collapse
mic is fixed but no sound when using headphone. Everytime I insert headphone os crashes and phone s switched off. When making call headphone works properly..

KnightHunt said:
mic is fixed but no sound when using headphone. Everytime I insert headphone os crashes and phone s switched off. When making call headphone works properly..
Click to expand...
Click to collapse
Haven't tested headphones yet ? I'll look into it later, I'm trying to get the camera working for now

Flashlight not working
supersayan1000 said:
Haven't tested headphones yet ? I'll look into it later, I'm trying to get the camera working for now
Click to expand...
Click to collapse
The flashlight is not working either. Please fix these things, I love Resurrection Remix and would love to use it as my daily driver ROM.

Help
after testing your rom I went back to stock rom( using qfil)
Now my pc wont detect my phone..
when I installed old rr rom and revert to stock every thing was fine
Your new rom has serious issue
I cant install any rom
PLEASE Help!!

Duke0404 said:
The flashlight is not working either. Please fix these things, I love Resurrection Remix and would love to use it as my daily driver ROM.
Click to expand...
Click to collapse
Flashlight module is connected to camera so it won't work until we fix camera

supersayan1000 said:
Flashlight module is connected to camera so it won't work until we fix camera
Click to expand...
Click to collapse
USB drivers don't seem to be working either. My computer recognizes device when in recovery but not when switched on. Besides I am also facing frequent crashes and random reboots. Please fix. Thank you for your support

Duke0404 said:
USB drivers don't seem to be working either. My computer recognizes device when in recovery but not when switched on. Besides I am also facing frequent crashes and random reboots. Please fix. Thank you for your support
Click to expand...
Click to collapse
Yeah I noticed last night that windows can't detect phone, strangely it works fine on Linux. And I never really faced random reboots need to see about that. By the way, I'm gonna abandon RR for few weeks

Related

[ROM] Android Nougat [7.0/7.1] for Lenovo K3 Note

An AOSP Nougat [7.0/7.1] ROM has been ported to JiaYu S3 [MT6752] based on M.A.D. [ROM] [7.1] Unofficial AOSP N . :highfive:
The sun of 'N' is rising for K3 Note.
Is there any Dev to port N to the Lenovo K3 Note like JiaYu S3?
Mahbub Supriyo said:
An AOSP Nougat [7.0/7.1] ROM has been ported to JiaYu S3 [MT6752] based on M.A.D. [ROM] [7.1] Unofficial AOSP N . :highfive:
The sun of 'N' is rising for K3 Note.
Is there any Dev to port N to the Lenovo K3 Note like JiaYu S3?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=781484&st=0#entry54634454
I need help with kernel
with the current setup and kernel,it is impossible to port 7.0 roms from jiayu s3 in the way 6.0 roms are being ported.however developers are working on it and you can expect it one day.
Here is what i found > https://giveawaytricks.in/install-aosp-android-7-1-nougat-lenovo-k3-note/
mugik04 said:
http://4pda.ru/forum/index.php?showtopic=781484&st=0#entry54634454
I need help with kernel
Click to expand...
Click to collapse
I can help you with the kernel
sandeep.sethi said:
I can help you with the kernel
Click to expand...
Click to collapse
I made a kernel from Jiayu S3 (built in drivers from K3note there). There are problems with a sound (I added the tfa driver to a kernel - perhaps that I missed that). I added CAM CAL similar to source code 6.0 - but cameras don't give operation signs.
Here in this post on 4pda (I have no access to spread links to XDA - I have no 10 posts)
At the moment I download the source code (in the form of archive). on Github didn't begin to load.
Xakep1993 said:
Here in this post on 4pda (I have no access to spread links to XDA - I have no 10 posts)
Click to expand...
Click to collapse
here is
Source 7 Android kernel code for Lenovo K3 Note
HTML:
https://yadi.sk/d/lGBl0Z7WxwvJp
Xakep1993 said:
I made a kernel from Jiayu S3 (built in drivers from K3note there). There are problems with a sound (I added the tfa driver to a kernel - perhaps that I missed that). I added CAM CAL similar to source code 6.0 - but cameras don't give operation signs.
Here in this post on 4pda (I have no access to spread links to XDA - I have no 10 posts)
At the moment I download the source code (in the form of archive). on Github didn't begin to load.
Click to expand...
Click to collapse
thing is i need the source code without it ,it is hard for me to know
---------- Post added at 07:05 AM ---------- Previous post was at 06:53 AM ----------
sa_vas73 said:
HTML:
https://yadi.sk/d/lGBl0Z7WxwvJp
Click to expand...
Click to collapse
ok working on this now
Thanks for Effort to port smooth and faster 7 on K3N.
I've found a 7.1 ROM here- "www(dot)needrom.com/download/aosp-8/comment-page-5/#comment-303899". It works fine for me.
But some issues found-
1. DT2W not works.
2. Rill not works.
3. Bluetoothe.
4. Notification light ignite randomly.
5. Auto Rotation is so logy.
6. Flashlight not works.
7. Camera.
primarily above are diagnosed to me.
Excluding the above it works fine for me. Looks so nice. Works smooth on wifi.
Waiting for the next stable update.
Thanks.
Mahbub Supriyo said:
Thanks for Effort to port smooth and faster 7 on K3N.
I've found a 7.1 ROM here- "www(dot)needrom.com/download/aosp-8/comment-page-5/#comment-303899". It works fine for
Dt2w I didn't add support.
Ril works, the patch put after a firmware? (After a patch it is necessary to do wipe) and if on normal to do to stitch right after a firmware
Click to expand...
Click to collapse
Xakep1993 said:
Mahbub Supriyo said:
Thanks for Effort to port smooth and faster 7 on K3N.
I've found a 7.1 ROM here- "www(dot)needrom.com/download/aosp-8/comment-page-5/#comment-303899". It works fine for
Dt2w I didn't add support.
Ril works, the patch put after a firmware? (After a patch it is necessary to do wipe) and if on normal to do to stitch right after a firmware
Click to expand...
Click to collapse
for now we need to to fix camera and sound
do you have kernel source from cheshkin
Click to expand...
Click to collapse
Waiting for a real STABLE version. ?
I'm on Androium VUI 1.2 again ?
Hope, I'll be back soon on N...
Thanks.
How to update N
Finally, I flashed this ROM and my world, it's so smooth and has a great battery. The modem helped improved my LTE speed on band 7 will have to wait for a more stable one but this is a great step in the right direction.
Kudos to all who ported this ROM and fixing some bugs so far.
I did installed 7.1 asop rom in my k3 note.It was showing as invalid imei.I tried to change the imei no using chamelephon(imei change) app.But the phone shows no sim card.I also flashed the Universal 3g/4g fixing zip using twrp.But it's not working.Please help me to fix imei and also nvram problem
assaultsethu said:
I did installed 7.1 asop rom in my k3 note.It was showing as invalid imei.I tried to change the imei no using chamelephon(imei change) app.But the phone shows no sim card.I also flashed the Universal 3g/4g fixing zip using twrp.But it's not working.Please help me to fix imei and also nvram problem
Click to expand...
Click to collapse
I also tried chamelephoen, but it not worked in 7.1.
obulesh.p said:
How to update N
Click to expand...
Click to collapse
You can follow this instruction.
assaultsethu said:
I did installed 7.1 asop rom in my k3 note.It was showing as invalid imei.I tried to change the imei no using chamelephon(imei change) app.But the phone shows no sim card.I also flashed the Universal 3g/4g fixing zip using twrp.But it's not working.Please help me to fix imei and also nvram problem
Click to expand...
Click to collapse
chamelephon doesn't work anymore in 7.1. I've tried it out, but...
Mahbub Supriyo said:
chamelephon doesn't work anymore in 7.1. I've tried it out, but...
Click to expand...
Click to collapse
same here...

[ROM] Mokee

Hello,
I just open this thread to discuss about the rom and share issues.
The rom is very close to Android stock.
Issues that I have encountered (Build: 2017-10-08):
-Led notification is blinking very very fast (and change settings does nothing)
-Bluetooth audio (for music and video) does not work (I haven't tried calls)
Camera works, fingerprint is fast as in MIUI, run smoothly
You must format data before flashing (or it will bootloop)
Link: https://download.mokeedev.com/?device=chiron
Wahoux said:
Hello,
Issues that I have encountered (Build: 2017-10-08):
-Led notification is blinking very very fast (and change settings does nothing)
-Bluetooth audio (for music and video) does not work (I haven't tried calls)
Camera works, fingerprint is fast as in MIUI, run smoothly
You must format data before flashing (or it will bootloop)
Link: https://download.mokeedev.com/?device=chiron
Click to expand...
Click to collapse
- Bluetooth audio bug is same as that in Mokee Xiaomi Mi 6 rom, dev has replied in their forums the next nightly should have it fixed.
- Notification light bug will not be fixed until source is out (dev replied on when i listed the bug on Mokee forums)
Another thing ive noticed:
- The rom included a non-official xposed port for nougat which I cant remove, only disable
- Rom does not pass safetynet. Tried magisk+hide to no avail
Wahoux said:
Hello,
I just open this thread to discuss about the rom and share issues.
The rom is very close to Android stock.
Issues that I have encountered (Build: 2017-10-08):
-Led notification is blinking very very fast (and change settings does nothing)
-Bluetooth audio (for music and video) does not work (I haven't tried calls)
Camera works, fingerprint is fast as in MIUI, run smoothly
You must format data before flashing (or it will bootloop)
Link: https://download.mokeedev.com/?device=chiron
Click to expand...
Click to collapse
Ugh, no bluetooth audio is a killer for me. I do like the idea of a near stock Android though...
Safetynet is the killer for me. Need bank apps to work.
duraaraa said:
Safetynet is the killer for me. Need bank apps to work.
Click to expand...
Click to collapse
True, but if they pre-installed xposed and made it un-removable, then safety net will always fail...
I am loving this ROM! The battery life doesn't seem as good as eu rom. Also notice volume for YouTube seems low at Max setting. Other than that this is amazing stick room with Xposed and Gravity box!
---------- Post added at 09:00 PM ---------- Previous post was at 08:39 PM ----------
BTW... Bluetooth for calls works flawlessly
ugene1980 said:
- Bluetooth audio bug is same as that in Mokee Xiaomi Mi 6 rom, dev has replied in their forums the next nightly should have it fixed.
- Notification light bug will not be fixed until source is out (dev replied on when i listed the bug on Mokee forums)
Another thing ive noticed:
- The rom included a non-official xposed port for nougat which I cant remove, only disable
- Rom does not pass safetynet. Tried magisk+hide to no avail
Click to expand...
Click to collapse
Seems the buildbot is failing for our device
http://build.mokeedev.com/nightly/
ninjazin said:
Seems the buildbot is failing for our device
http://build.mokeedev.com/nightly/
Click to expand...
Click to collapse
Yep, hopefully someone will look into it soon.
ugene1980 said:
- Bluetooth audio bug is same as that in Mokee Xiaomi Mi 6 rom, dev has replied in their forums the next nightly should have it fixed.
- Notification light bug will not be fixed until source is out (dev replied on when i listed the bug on Mokee forums)
Another thing ive noticed:
- The rom included a non-official xposed port for nougat which I cant remove, only disable
- Rom does not pass safetynet. Tried magisk+hide to no avail
Click to expand...
Click to collapse
Safetynet doesn't pass with xposed.. uninstall it
Shoot. No VOLTE on T-Mobile.. Every time I make a call I notice it drops to 3g or H+. Anyone know a fix?
Also, when making a 3 way conference call the phone app force closes and can't open.
11/11 build of Mokee is just out~ go grab it!
ugene1980 said:
11/11 build of Mokee is just out~ go grab it!
Click to expand...
Click to collapse
Hi,
Woah... 11/11 released on 10/11 ! that is looking into the future
Anyways, jokes apart, did you try it and if so, is Bluetooth audio working ? It's something I would need
By the way : I just looked into the Mokee source. It seems they have the source for device and vendor.
Anyone knows if the msm8996 kernel for xiaomi would work with these ? tat would allow to build other ROM's.
Regards.
NexusPenguin said:
Hi,
Woah... 11/11 released on 10/11 ! that is looking into the future
Anyways, jokes apart, did you try it and if so, is Bluetooth audio working ? It's something I would need
By the way : I just looked into the Mokee source. It seems they have the source for device and vendor.
Anyone knows if the msm8996 kernel for xiaomi would work with these ? tat would allow to build other ROM's.
Regards.
Click to expand...
Click to collapse
Have not tried it~ (bt-audio should be fixed as the mi6 had the same issue and is fixed with currently nightly, dev also added aptx+aptxhd in addition to a2dp)
Mix2 hasnt had it's source released, the maintainer for mix2 happens to be the maintainer for the mi6 (which had it's sources released). As the both use smiliar hardware (sd835, camera sensor) they messed around to get the mix2 rom up. Which is why somethings will not work properly until mix2 sources are released (like the prox sensor and the notif light)
ugene1980 said:
Have not tried it~ (bt-audio should be fixed as the mi6 had the same issue and is fixed with currently nightly, dev also added aptx+aptxhd in addition to a2dp)
Mix2 hasnt had it's source released, the maintainer for mix2 happens to be the maintainer for the mi6 (which had it's sources released). As the both use smiliar hardware (sd835, camera sensor) they messed around to get the mix2 rom up. Which is why somethings will not work properly until mix2 sources are released (like the prox sensor and the notif light)
Click to expand...
Click to collapse
OK... anywyas : 10/11 doesn't work properly it seems... Got a ****load of errors at boot and then it's stuck at "Looking for updates"
Back to EPIC ROM...
Regards.
NexusPenguin said:
OK... anywyas : 10/11 doesn't work properly it seems... Got a ****load of errors at boot and then it's stuck at "Looking for updates"
Back to EPIC ROM...
Regards.
Click to expand...
Click to collapse
that sucks...Full wipe?
Downloading now. First I Will try dirty over which I am currently running. If that doesn't work I will do a full wipe. Last version of mokee running great for me
stu5797 said:
Downloading now. First I Will try dirty over which I am currently running. If that doesn't work I will do a full wipe. Last version of mokee running great for me
Click to expand...
Click to collapse
It was. Just needed BT audio. if you confirm i'll switch ASAP
On the newest mokee! You need to wipe everything and do a clean install. Dirty flash and you get a bunch of errors and need to reboot into recovery
stu5797 said:
On the newest mokee! You need to wipe everything and do a clean install. Dirty flash and you get a bunch of errors and need to reboot into recovery
Click to expand...
Click to collapse
It works? BT audio? ::highfive:

[ROM][7.1.2] Unofficial LineageOS 14.1 for Galaxy S7 Edge

Unofficial LineageOS for Galaxy S7 Edge
Super smooth LineageOS build based on latest sources
What’s working
Ambient display
Camera with latest fixes
Microphone
Fingerprint reader
All sensors
SD Card
Capacitive backlight options
Wi-Fi Hotspot
Bugs
- You cannot open apps when RAM is full unless you close some active ones. *fixed*
- Mic recording not working *fixed*
- You tell me
Install Instructions
1. Download ROM.
2. Wipe dalvik, cache, data and system.
3. Flash the rom in recovery.
4. Reboot device.
Download :
Build 1 :
https://drive.google.com/open?id=0B6RG6jVMM3Yvdkl3clByTTF2U1E
Build 2 :
https://drive.google.com/file/d/0B6RG6jVMM3YveGNtc2MtXzhid1k/view?usp=sharing
Telegram group :
https://t.me/joinchat/FPu8TkPADo26EgjbVon3Iw
Credit :
Thanks to @NoXXX for helping test builds
Thank you to @ProtoDeVNan0 for all his help and support
deedwar
Andrw0830
FevaX
Jesec
SaschaNes
Thanks to deedwar and Andrw0830 for sources
XDA:DevDB Information
Unofficial LineageOS, ROM for the Samsung Galaxy S7 Edge
Contributors
dylanneve1
Source Code: [url]https://github.com/LineageOS[/URL]
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Stable
Created 2017-10-17
Last Updated 2017-10-17
Just tried this rom for fun ... and what do you know? The first LineageOS for hero2lte with a working good quality camera. If bluetooth is OK, too, this is a great job! Thanks!
stepstra said:
Just tried this rom for fun ... and what do you know? The first LineageOS for hero2lte with a working good quality camera. If bluetooth is OK, too, this is a great job! Thanks!
Click to expand...
Click to collapse
Thanks, Bluetooth should work fine
how about fixing crackling speaker with google assistant on?
btw great to see more aosp roms so keep up
darkoj2007 said:
how about fixing crackling speaker with google assistant on?
btw great to see more aosp roms so keep up
Click to expand...
Click to collapse
Still here and thanks
dylanneve1 said:
Still here and thanks
Click to expand...
Click to collapse
So awesome to see You here! For everyone who doesn't know, Dylan is a really nice Dev who used to build roms outside XDA for some time, but he finally joined us!
just installed this, photos are still coming out in ultra low quality (blurring with no definition). Am I missing something here? using stock camera
shreddeddonut said:
just installed this, photos are still coming out in ultra low quality (blurring with no definition). Am I missing something here? using stock camera
Click to expand...
Click to collapse
Use HTC cam, camera in Gapps package doesn't work
Gapps package overrides snap if it includes Google camera
stepstra said:
Just tried this rom for fun ... and what do you know? The first LineageOS for hero2lte with a working good quality camera. If bluetooth is OK, too, this is a great job! Thanks!
Click to expand...
Click to collapse
Is battery better now? A few updates ago battery would only last 4ish hours and super fast drain with screen off.
Hey is this patched against Krack? That wifi hack
Hi
Thanks for your efforts
Will I receive new release ota if I install this rom?
Cheers
Yves911 said:
Hi
Thanks for your efforts
Will I receive new release ota if I install this rom?
Cheers
Click to expand...
Click to collapse
No you would not
DreddJudge said:
Hey is this patched against Krack? That wifi hack
Click to expand...
Click to collapse
Should be
This ROM is running very good on my end with Kermit kernel. I think tomorrow I'll run the kernel it comes with to see how that compares. I'd like to hear the dev thoughts on custom over included kernel for battery or performance or just stability.
What's the correct flash order if I want working root? Is the below correct?
1. ROM
2. Gapps
3. SuperSu from lineage site
Can I use magisk or will I keep getting google services errors?
New build coming soon
Changelog
- Audio recording issue fixed
- RAM issue should be fixed
Viceroy_N said:
What's the correct flash order if I want working root? Is the below correct?
1. ROM
2. Gapps
3. SuperSu from lineage site
Can I use magisk or will I keep getting google services errors?
Click to expand...
Click to collapse
That is correct order. I would use CM root. I wouldn't recommended magisk unless you absolutely need it causes lag, stutter and fc
dylanneve1 said:
New build coming soon
Changelog
- Audio recording issue fixed
- RAM issue should be fixed
Click to expand...
Click to collapse
does this mean crackling speaker also?
darkoj2007 said:
does this mean crackling speaker also?
Click to expand...
Click to collapse
To fix crackling issue turn off "Ok Google detection"
dylanneve1 said:
To fix crackling issue turn off "Ok Google detection"
Click to expand...
Click to collapse
we know about this but thanks for reply anyway keep up the good work

[ROM][T710/T715][8.x] Resurrection Remix 20180601 [ABANDONED]

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
Resurrection Remix the ROM has been based on CM, slim. omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device.
Requirements:
- twrp 3.2.0+
- backup everything before install
- wipe data before upgrading from LineageOS 14.1 or stock rom
Install:
- Flash zip in TWRP
- Don't forget about gapps (arm 8.1)
Google apps should be installed via recovery immediately after installing ROM.
If you reboot into ROM before installing Google apps, you must factory reset and then install them, otherwise expect crashes.
Not working:
mic
stuff, I haven't checked
Download:
T710: https://drive.google.com/open?id=195qu6ymAMdN43bMnOmXCRAtn7mct5F_B
T715: https://drive.google.com/open?id=1p5xNv41RWiD7IwwCw1bkNeTCP6DwNs_K
Device sources:
https://github.com/bonuzzz
bonuzzz said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
Resurrection Remix the ROM has been based on CM, slim. omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device.
Requirements:
- twrp 3.2.0+
- backup everything before install
- wipe data before upgrading from LineageOS 14.1 or stock rom
Install:
- Flash zip in TWRP
- Don't forget about gapps (arm 8.1)
Google apps should be installed via recovery immediately after installing ROM.
If you reboot into ROM before installing Google apps, you must factory reset and then install them, otherwise expect crashes.
Not working:
mic
stuff, I haven't checked
Download:
T710: https://drive.google.com/open?id=195qu6ymAMdN43bMnOmXCRAtn7mct5F_B
T715: https://drive.google.com/open?id=1p5xNv41RWiD7IwwCw1bkNeTCP6DwNs_K
Device sources:
https://github.com/bonuzzz
Click to expand...
Click to collapse
Great job keep it up.
@bonuzzz plz help me, after flashing this rom and restoring back official nougat caused my sensors to disappear what can I do plz help me.....
Androbots said:
@bonuzzz plz help me, after flashing this rom and restoring back official nougat caused my sensors to disappear what can I do plz help me.....
Click to expand...
Click to collapse
do clean install of stock rom
bonuzzz said:
do clean install of stock rom
Click to expand...
Click to collapse
I restored the TWRP backup that I made before flashing RR and all seems good again. I mean previously all sensors just disappeared and then I flashed RR again no luck there but then I restored the TouchWiz backup and this time sensors were back . Thanks for the response appreciate that.
So, not to try it?
It kills sensors and only odin will fix?
I installed it on t715. Working good except mic of course and stand by is not good if sim is in... But I detected same problem as on resurrection - after wipe this Los and restored stock from twrp mic also not working on stock... @bonuzzz, first of all thank for great efforts!
And this problem is twrp or linage os related?
Thanks
ivanox1972 said:
I installed it on t715. Working good except mic of course and stand by is not good if sim is in... But I detected same problem as on resurrection - after wipe this Los and restored stock from twrp mic also not working on stock... @bonuzzz, first of all thank for great efforts!
And this problem is twrp or linage os related?
Thanks
Click to expand...
Click to collapse
It depends on how you returned to stock rom. with twrp backup or with odin?
@bonuzzz Twrp, first.
Of course,, odin solved all...
But twrp restore inherits all err from los to twz...
Will this work on SM-T815Y?
After flashing this my back and recent button lights no longer work. Is there a way to fix this?
new t710 test build
@ripee has a build up for the 710 were testing.
everything works
thanks to the device trees from @bonuzzz.
all of the source files are up at github.com/ripee
latest build fixed video camera
wifi 5gz works, fingerprint works, camer and video recorder works
aosp camera and video have an issue related to the viewfinder window sizing, but it works.
bluetooth works playing audio
he wanted to let others know. so here i post.
build in my signiture
---------- Post added at 04:51 PM ---------- Previous post was at 04:36 PM ----------
@ripee has a build up for the 710 were testing.
everything works
thanks to the device trees from @bonuzzz.
all of the source files are up at github.com/ripee
latest build fixed video camera
wifi 5gz works, fingerprint works, camer and video recorder works
aosp camera and video have an issue related to the viewfinder window sizing, but it works.
bluetooth works playing audio
he wanted to let others know. so here i post.
build in my signiture

Quick Charge ROMs

Can someone tell me which ROM(s) supports Quick Charge?
Havoc OS Unofficial. But you've to reboot phone after putting charger. It works just a little slower than MIUI, quiet a decent fast charging rom. Also xenonHD 8.1 rom by Sanek is good.
xperia ray said:
Havoc OS Unofficial. But you've to reboot phone after putting charger. It works just a little slower than MIUI, quiet a decent fast charging rom. Also xenonHD 8.1 rom by Sanek is good.
Click to expand...
Click to collapse
Thank you
Any 7.1 rom have it, and it works like a charm, even while using the phone
slash1432422 said:
Any 7.1 rom have it, and it works like a charm, even while using the phone
Click to expand...
Click to collapse
That is absolutely correct. I went back from Havoc 2.9 to XenonHD.
All works great including microg. Best rom ever für mimax 2.
And i used to have havoc in my device for about 1 year. Everything with XenonHD is flawless. I' ll stay with this Rom. Big thanks to sanek!!
RayfG said:
That is absolutely correct. I went back from Havoc 2.9 to XenonHD.
All works great including microg. Best rom ever für mimax 2.
And i used to have havoc in my device for about 1 year. Everything with XenonHD is flawless. I' ll stay with this Rom. Big thanks to sanek!!
Click to expand...
Click to collapse
XenonHD 8.1 or there is 7.1 Xenon too?
xperia ray said:
XenonHD 8.1 or there is 7.1 Xenon too?
Click to expand...
Click to collapse
I am on 8.1 and downloaded the rom early. Unfortunate the thread is closed due to missing kernel sources i think.
Greetz, Ray
RayfG said:
I am on 8.1 and downloaded the rom early. Unfortunate the thread is closed due to missing kernel sources i think.
Greetz, Ray
Click to expand...
Click to collapse
That i tried. First rom with echo and volume level fix. Great one. Try Havoc by Sanek. You can PM me for more info. Btw how's QC working on Xenon? You noted mA?
xperia ray said:
That i tried. First rom with echo and volume level fix. Great one. Try Havoc by Sanek. You can PM me for more info. Btw how's QC working on Xenon? You noted mA?
Click to expand...
Click to collapse
QC is very fine, but i did not measure. I am content with QC. It works even with phone on. Where do i get havoc Form sanek?
In the Hardrock havoc FM radio did not work, sound was a mess, in call volume wasn 't fixed etc.
RayfG said:
QC is very fine, but i did not measure. I am content with QC. It works even with phone on. Where do i get havoc Form sanek?
In the Hardrock havoc FM radio did not work, sound was a mess, in call volume wasn 't fixed etc.
Click to expand...
Click to collapse
havoc pie by Sanek https://drive.google.com/file/d/1-0tfBylz5kjEjs0tDLtTskn3qms4AED5/view with incall vol working and also QC
[email protected] said:
havoc pie by Sanek https://drive.google.com/file/d/1-0tfBylz5kjEjs0tDLtTskn3qms4AED5/view with incall vol working and also QC
Click to expand...
Click to collapse
Thanks for providing the download link!
If anyone gets the "Oops! There was a problem with the network" message, just click on the download icon in the upper right and file should download properly.
---------- Post added at 12:51 PM ---------- Previous post was at 12:27 PM ----------
xperia ray said:
Havoc OS Unofficial. But you've to reboot phone after putting charger. It works just a little slower than MIUI, quiet a decent fast charging rom. Also xenonHD 8.1 rom by Sanek is good.
Click to expand...
Click to collapse
Can you please provide download link for xenonHD 8.1 rom by Sanek? Is there an English thread for this one?
Thanks!
---------------
Nevermind, I found it here: https://4pda.ru/forum/index.php?showtopic=838678&st=4200#entry89753953 , post #4208.
Best to use Chrome so you can translate from Russian .
CatalystWon said:
Thanks for providing the download link!
If anyone gets the "Oops! There was a problem with the network" message, just click on the download icon in the upper right and file should download properly.
---------- Post added at 12:51 PM ---------- Previous post was at 12:27 PM ----------
Can you please provide download link for xenonHD 8.1 rom by Sanek? Is there an English thread for this one?
Thanks!
---------------
Nevermind, I found it here: https://4pda.ru/forum/index.php?showtopic=838678&st=4200#entry89753953 , post #4208.
Best to use Chrome so you can translate from Russian .
Click to expand...
Click to collapse
English thread
https://forum.xda-developers.com/mi-max-2/development/xenonhd8-1-0-unofficial-call-wokr-t3989463

Categories

Resources