LG G3 Not Turning on or Charging after my accident - Device Repair

I was following the instruction on Here
And I runned this code...
Code:
fastboot erase aboot ( this command will erase aboot.img from phone)
fastboot flash aboot aboot.img ( this command will flash aboot to phone )
fastboot erase boot
fastboot flash boot boot.img
fastboot erase laf
fastboot flash laf laf.img
fastboot erase rpm
fastboot flash rpm rpm.img
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot erase modem
fastboot flash modem modem.img
fastboot erase misc
fastboot flash misc misc.img
fastboot erase sbl1
fastboot flash sbl1 sbl1.img
fastboot erase tz
fastboot flash tz tz.img
fastboot erase dbi
fastboot flash dbi dbi.img
fastboot reboot
exit
But all the flash command worked and the erase worked. Then my phone turned off. I tried to turn it on but I can't.. :crying::crying:
Plz Help

Related

[Q] problem flashing mi3

i have problem fastboot flashing for my mi3, i use miflash and developers rom,but i have stuck my phone,and it said 'remote: size too large' like on pict,can anyone give me how to solve this problem?
thanks before
Download a mi3 fastboot image from miui site
Extract the files from image folder and put in a folder where you have adb
Put the phone in fastboot mode ( power + volume down )
open adb, copy paste those and let the magic happen!
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem NON-HLOS.bin
fastboot flash modem1 NON-HLOS.bin
fastboot flash system system.img
fastboot flash system1 system.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash userdata userdata.img
fastboot flash boot1 boot.img
fastboot reboot

How to re-lock XT1925-6 on firmware ALI_RETAIL_8.0.0_OPS27.104-15-10-4

With firmware ALI_RETAIL_8.0.0_OPS27.104-15-10-4 rooted enable adb and unlock oem boot loader in the system settings,
reboot in fastboot mode and run:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
wen it finish the process DO NOT PRESS ENTER erase fastboot reboot and run this command ONE BY ONE and wait for each one to finish before adding the next one
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash boot boot.img
fastboot oem lock
fastboot oem fb_mode_clear
xjunior said:
I'm trying to re-lock my bootloader, but nothing works
Always get a boot loader not signed error and bad key ,
Did anybody relocked this specific model?
I've tried this method and a few others with different firmware and bat file and individually flashing the commands
Click to expand...
Click to collapse
Just saying if you trying to relock the bootloader to send it into moto you can't. The second you request your unlock key it voids the warranty and flags your device for there repair department.
I've figure out
With firmware ALI_RETAIL_8.0.0_OPS27.104-15-10-4 rooted enable adb and unlock oem boot loader in the system settings,
reboot in fastboot mode and run:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
wen it finish the process DO NOT PRESS ENTER erase fastboot reboot and run this command ONE BY ONE and wait for each one to finish before adding the next one
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash boot boot.img
fastboot oem lock
fastboot oem fb_mode_clear
Will this bring back the video calling option? I have the same device

HELP! INFOImage signed with key bad key (Moto G6 xt-1922-3) Can't flash stock rom.

HI, i need your help!
I bricked my phone, i could only see a black screen.
I have managed to get around that by flashing the bootloader back.
Now my phone only boots into bootloader no matter what.
The reason is, when i try to flash a stock rom i get the message (INFOImage signed with key bad key) on almost every .img
I've tried downloading the regions that seemed to be mine but they don't work. RETAIL, RETEU, TELEU, VIPEU and so on...
My phone was brought from T-Mobile. it is the xt-1922-3 variant.
AND YES, the bootloader is unlocked. (i've also managed to flash some sort of stock recovery because twrp wouldn't work, because i can't tap the screen)
I have the same problem. How do I solve it?
@Alyctro
DUDE, YOU HAVE A MOTO G6 PLAY.
Try the RETAIL firmware listed here:
https://mirrors.lolinet.com/firmware/moto/aljeter/official/
If you're trying to relock the bootloader, which should fix the "bad key" message, follow this:
Code:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash boot boot.img
fastboot oem lock
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot flash fsg fsg.mbn
fastboot oem fb_mode_clear
Otherwise, this should work, but you'll still get "bad key" message when flashing boot.img and recovery.img (this is due to the bootloader being unlocked):
Code:
fastboot erase userdata
fastboot erase cache
fastboot erase modemst1
fastboot erase modemst2
fastboot erase carrier
fastboot erase DDR
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash oem oem.img
fastboot flash logo logo.bin
fastboot flash dsp adspso.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot erase cache
fastboot reboot
Ragarianok said:
@Alyctro
DUDE, YOU HAVE A MOTO G6 PLAY.
Try the RETAIL firmware listed here:
https://mirrors.lolinet.com/firmware/moto/aljeter/official/
If you're trying to relock the bootloader, which should fix the "bad key" message, follow this:
Code:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash boot boot.img
fastboot oem lock
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot flash fsg fsg.mbn
fastboot oem fb_mode_clear
Otherwise, this should work, but you'll still get "bad key" message when flashing boot.img and recovery.img (this is due to the bootloader being unlocked):
Code:
fastboot erase userdata
fastboot erase cache
fastboot erase modemst1
fastboot erase modemst2
fastboot erase carrier
fastboot erase DDR
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash oem oem.img
fastboot flash logo logo.bin
fastboot flash dsp adspso.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot erase cache
fastboot reboot
Click to expand...
Click to collapse
i need help too. it says image signed with bad key when flashing bootloader.img. i have a retus moto g6. any help is appreciated
Ragarianok said:
@Alyctro
DUDE, YOU HAVE A MOTO G6 PLAY.
Try the RETAIL firmware listed here:
https://mirrors.lolinet.com/firmware/moto/aljeter/official/
If you're trying to relock the bootloader, which should fix the "bad key" message, follow this:
Code:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash boot boot.img
fastboot oem lock
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot flash fsg fsg.mbn
fastboot oem fb_mode_clear
Otherwise, this should work, but you'll still get "bad key" message when flashing boot.img and recovery.img (this is due to the bootloader being unlocked):
Code:
fastboot erase userdata
fastboot erase cache
fastboot erase modemst1
fastboot erase modemst2
fastboot erase carrier
fastboot erase DDR
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash oem oem.img
fastboot flash logo logo.bin
fastboot flash dsp adspso.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot erase cache
fastboot reboot
Click to expand...
Click to collapse
@Ragarianok
Perfect, it works, moto g 6 play XT1922-5_ALJETER, thanks.

Bootloop with Motorola Logo

Well, I'll tell you ... Well, I bought a Moto G5S Plus for that of late 2018, everything worked fine within normal, sometimes when I restarted it, there were some System errors that did not respond to which I did not pay much attention, because then it worked normal ... until the beginning of this year, the memory was a little full, so I inserted a Micro SD to free up some space and move many images that I had there. I turned it off to insert the SD and when I went to turn it on, it did not pass the Motorola Logo. I thought it was on drums or something, I reset it, did various things to it and to this day, it continues like this ...
In the first instance, not knowing much or nothing about the topic, try this:
Unsuccessfully, then I also tried clearing the cache via Fastboot, but also had no solution ...
Then there was the Hard Reset through Fastboot or reinstalling the Rom through AVOID, because I have many documents, especially Notepads with important information, as well as contacts and multimedia material that I need to recover ...
So I decided to keep looking and luckily I found an interesting post in this forum:
https://www.htcmania.com/showthread....1543&styleid=6
This gave me hope again, besides that I am lucky to have a Moto G2, so I tried the steps described in that post ... And I realized that it obviously works, it does not erase the data from the computer ... Then I proceeded to do it with the Moto G5S Plus and some commands did not work, I did a little research and realized that the files of each ROM were totally different, so I found some specific commands for the Moto G5S Plus:
(Downloading this rom: SANDERS_RETAIL_8.1.0_OPS28.65-36-14_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml)
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
I also found another version of commands that differs a bit
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
In that case, following the instructions in the aforementioned post,
(https://www.htcmania.com/showthread....1543&styleid=6), I decided to take into account the recommendations and AVOID commands such as:
fastboot flash partition gpt.bin
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
Everything that could erase data, but I also had doubts about these, I don't know what action they perform:
fastboot flash partition gpt.bin
fastboot oem fb_mode_set
fastboot erase DDR
fastboot oem fb_mode_clear
Finally, I decided to just use these commands, but the phone remained the same in the Logo Bootloop:
fastboot devices
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
It is here, when I ****ing turn to experts like you, since I don't know what else to do and I still have many doubts ... Do you think that data has been deleted with these procedures or is everything still the same? Is there a way to install the TWRP to save data?
Many videos and forums that I have read say that it can also be BATTERY FAILURE, but I very much doubt that it is, in addition to removing the battery from this model, yes I'm not bad I think you have to remove the display and well, many technicians do not know Buy for it ... Also normal charge when I charge it to full and the battery is consumed in the normal percentage, so that's why I don't think ... But I do need that if they are so kind to give me a hand, because I no longer know What else to do, I really sometimes make my head a madhouse with this topic ...
Friends I thank you and I am very aware. Really thank you very much
Help me!! PLEASE!!

How To Guide Unbrick Mi 11 Ultra via fastboot commands (softbrick/boobloop)

Download and extract model specific firmware zip to the fastboot folder.
Enter fastboot by turning the device off and then turning it on using pwr+vol down for few seconds.
If it doesn't turnoff, then let the battery drain out on its own and then retry to enter fastboot.
Execute each of the below commands in the CMD window, one at a time. If you get any errors after executing any of these commands, then don’t leave the process mid-way. Rather continue executing the rest of the commands and then check the results.
Fastboot commands​fastboot erase boot_ab
fastboot flash xbl_ab xbl.elf
fastboot flash xbl_config_ab xbl_config.elf
fastboot flash abl_ab abl.elf
fastboot flash aop_ab aop.mbn
fastboot flash tz_ab tz.mbn
fastboot flash featenabler_ab featenabler.mbn
fastboot flash hyp_ab hypvm.mbn
fastboot flash modem_ab NON-HLOS.bin
fastboot flash bluetooth_ab BTFM.bin
fastboot flash dsp_ab dspso.bin
fastboot flash keymaster_ab km41.mbn
fastboot flash devcfg_ab devcfg.mbn
fastboot flash qupfw_ab qupv3fw.elf
fastboot flash uefisecapp_ab uefi_sec.mbn
fastboot erase imagefv_ab
fastboot flash imagefv_ab imagefv.elf
fastboot flash shrm_ab shrm.elf
fastboot flash multiimgoem_ab multi_image.mbn
fastboot flash cpucp_ab cpucp.elf
fastboot flash qweslicstore_ab qweslicstore.bin
fastboot flash logfs logfs_ufs_8mb.bin
fastboot flash rescue rescue.img
fastboot flash storsec storsec.mbn
fastboot flash spunvm spunvm.bin
fastboot flash rtice rtice.mbn
fastboot flash vendor_boot_ab vendor_boot.img
fastboot flash vm-bootsys_ab vm-bootsys.img
fastboot flash super super.img
fastboot flash cust cust.img
fastboot flash dtbo_ab dtbo.img
fastboot flash vbmeta_ab vbmeta.img
fastboot flash vbmeta_system_ab vbmeta_system.img
fastboot erase metadata
fastboot flash metadata metadata.img
fastboot erase userdata
fastboot flash userdata userdata.img
fastboot flash boot_ab boot.img
fastboot flash logo logo.img
fastboot set_active a
fastboot reboot
If the device is still boot looping, fastboot -w (as the final option) and repeat all the above commands step-by-step.

Categories

Resources