So, i have a P10 vtr-l29c432, bootloader unlocked, with twrp installed and from future rom installed, and now i want to go back to stock rom with Huawei recovery, to use the official updates via ota without problems. I'm not a noob but this is my first Huawei device and things are way more complicated compared with oneplus or nexus devices. My question is how to do it, because what i've so far is confusing me, if someone could explain me or give me some instructions i will appreciate it, thanks!
Hi!
same situation here. I would very much like to go back to stock but I'm not sure how... I saw a tutorial but I am not certain that that is what I need. Any confirmation would be very appreciated!!!
Tx & best
Exact same problem here on the p10 vtr-l09, seems to be a few different methods out there, either don't work or too confusing
You can try to update your phone with my guide.
This will reformat the system and your phone is on stock after a factory reset (reset is important when you come from another rom).
After factory reset you should be able to lock the bootloader.
Important is that you have in mind which Android version is installed and which phone model you have.
No warranty for this, I didn't try it or know someone with the same situation. But after learning something about how emui works it shouldn't be a problem.
did anyone tried this? I'm using custom rom from openkirin project and I would like to get back to stock. I have the stock recovery
On openkirin's website is a tutorial.
You need to extract system.img, ramdisk.img and kernel.img from update.app and flash them with Fastboot. After this boot into eRecovery and make a factory reset.
Jannomag said:
On openkirin's website is a tutorial.
You need to extract system.img, ramdisk.img and kernel.img from update.app and flash them with Fastboot. After this boot into eRecovery and make a factory reset.
Click to expand...
Click to collapse
Yeah I tried to follow the instructions which they put in three separate articles, however the last one is landing on the main page and I don't see the flasing instructions. Here is the link:
https://openkirin.net/user_guide/how-to-flash-extracted-partition-images/
Doesn't work in all countries but worth a try:
Go to eRecovery (not recovery) and use wifi to go back to stock.
Worked for me.
amducias said:
Yeah I tried to follow the instructions which they put in three separate articles, however the last one is landing on the main page and I don't see the flasing instructions. Here is the link:
https://openkirin.net/user_guide/how-to-flash-extracted-partition-images/
Click to expand...
Click to collapse
Then do it like I wrote, the Fastboot commands should be clear if you already installed the Rom.
WiFi downloads don't work if you're rooted, you need to flash stock ramdisk manually before you can download via eRecovery.
ej8989 said:
Doesn't work in all countries but worth a try:
Go to eRecovery (not recovery) and use wifi to go back to stock.
Worked for me.
Click to expand...
Click to collapse
You're a life saver!!! Thank you very much!
Jannomag said:
WiFi downloads don't work if you're rooted, you need to flash stock ramdisk manually before you can download via eRecovery.
Click to expand...
Click to collapse
Maybe he didn't install magisk when he was on one of the OpenKirin roms, so ramdisk is still stock. I used this eRecovery WiFi method when I was on fRomFuture, no magisk installed.
amducias said:
You're a life saver!!! Thank you very much!
Click to expand...
Click to collapse
You're welcome.
Use huru updater as it is safest back to stock option for latest Huawei devices. Lookup tool right here in xda.
absynteZero said:
If the phone is already with last version, i cant be sure it can be possible, ask the post autor about manual oreo udpate. from my remember his name is Jannomag
Click to expand...
Click to collapse
Jannomag here, it's possible to "update" to the same version. My script just tells the recovery to install the given update files. The recovery will overwrite the system without removing user data.
This should work without any issues but it can happen, that bugs are still present after this. If you want to fix firmware issues a complete factory reset is much more effective.
absynteZero said:
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
That is it.
Related
I know that there are some threads over this topic, but there is nowhere a specific answer. I have currently Sokkoban's ROM, and I want to revert to the official build. Can someon provide me with the necessary files in order to flash a stock recovery? I found only this answer, but there are no available links for the files. I would appreciate if anyone could help me. I have ALE L21- dual european edition, running on custom rom based on C432B574.
Thanks in advance.
Edit: tried with the HuaweiUpdateExtractor with the UPDATE.APP file, and flashed the first 3 images (boot, recovery cust) but I get an error while trying to flash the system.img.
http://www.carbontesla.com/2016/07/download-huawei-p8-lite-b574-full-marshmallow-firmware-europe/ download this, put dload folder on sd card, and flash with 3 buttons method
speedster_no1 said:
http://www.carbontesla.com/2016/07/download-huawei-p8-lite-b574-full-marshmallow-firmware-europe/ download this, put dload folder on sd card, and flash with 3 buttons method
Click to expand...
Click to collapse
Thanks. I am gonna try it tomorrow. I 've been trying all day to find a way. I hope this will work!
Edit : it didn't work. Thanks anyway.
spirto82 said:
Thanks. I am gonna try it tomorrow. I 've been trying all day to find a way. I hope this will work!
Edit : it didn't work. Thanks anyway.
Click to expand...
Click to collapse
Sokkoban too said to flash 4 images, but i too got error while flashing system image...
Sent from my ALE-L21 using XDA-Developers mobile app
amageek said:
Sokkoban too said to flash 4 images, but i too got error while flashing system image...
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
It got messy after installing the 4 images. I tried this post and got myself with B052 and emui 4.0. Later I tried our post MEGA-THREAD ALE-L21, ALE-L23, ALE-L02, Converting, Root, Unbrick, Updating, Xposed - chapter 4: Unbricking but nothing.
spirto82 said:
It got messy after installing the 4 images. I tried this post and got myself with B052 and emui 4.0. Later I tried our post MEGA-THREAD ALE-L21, ALE-L23, ALE-L02, Converting, Root, Unbrick, Updating, Xposed - chapter 4: Unbricking but nothing.
Click to expand...
Click to collapse
Well for now, i am happy with sokkoban's deodexed rom..
Got light painting, removed bloatware, xposed compatible... So no complains.. I just wanted to make sure that going back is possible, and some say it is by flashing 4 images... But not with us.. Anyways will keep you updated if i find something new...
amageek said:
Well for now, i am happy with sokkoban's deodexed rom..
Got light painting, removed bloatware, xposed compatible... So no complains.. I just wanted to make sure that going back is possible, and some say it is by flashing 4 images... But not with us.. Anyways will keep you updated if i find something new...
Click to expand...
Click to collapse
You are absolutely right. Although Sokkoban's ROM is really very good, you cannot go back to the official easily. Still din't try to flash another rom, like cm 11 and then go back to the official. If anyones does try it, he should let us know.
spirto82 said:
I know that there are some threads over this topic, but there is nowhere a specific answer. I have currently Sokkoban's ROM, and I want to revert to the official build. Can someon provide me with the necessary files in order to flash a stock recovery? I found only this answer, but there are no available links for the files. I would appreciate if anyone could help me. I have ALE L21- dual european edition, running on custom rom based on C432B574.
Thanks in advance.
Edit: tried with the HuaweiUpdateExtractor with the UPDATE.APP file, and flashed the first 3 images (boot, recovery cust) but I get an error while trying to flash the system.img.
Click to expand...
Click to collapse
You need to flash the original recovery(which you already have). Then put dload folder in sdcard and upgrade manually. You might get BALONG bug (because this happened to me) so I recommend you to start from beginning( the very first firmware for your model/country). For me it was B120. It contained two dload folders one was the system and the other was vendor file. You need both files.
Suleiman01 said:
You need to flash the original recovery(which you already have). Then put dload folder in sdcard and upgrade manually. You might get BALONG bug (because this happened to me) so I recommend you to start from beginning( the very first firmware for your model/country). For me it was B120. It contained two dload folders one was the system and the other was vendor file. You need both files.
Click to expand...
Click to collapse
Tried everything. Even the files for converting into dual. The only thing I managed to get, was: Sokkoban's ROM, and after a factory reset, I got B052 with EMUI 4. Hopefully someone will find a way and create a guide.
spirto82 said:
Tried everything. Even the files for converting into dual. The only thing I managed to get, was: Sokkoban's ROM, and after a factory reset, I got B052 with EMUI 4. Hopefully someone will find a way and create a guide.
Click to expand...
Click to collapse
I reverted back using the same procedure. What do you mean by converting files to dual? Isn't your phone already dual sim?
---------- Post added at 05:34 PM ---------- Previous post was at 05:27 PM ----------
Suleiman01 said:
I reverted back using the same procedure. What do you mean by converting files to dual? Isn't your phone already dual sim?
Click to expand...
Click to collapse
If you are on B052 (official) and did not have balong bug then I think you can update to emui 4.0/Android 6.0 without any issues.
Suleiman01 said:
I reverted back using the same procedure. What do you mean by converting files to dual? Isn't your phone already dual sim?
If you are on B052 (official) and did not have balong bug then I think you can update to emui 4.0/Android 6.0 without any issues.
Click to expand...
Click to collapse
I used MEGA-THREAD ALE-L21, ALE-L23, ALE-L02, Converting, Root, Unbrick, Updating, Xposed - chapter 4: Unbricking but didn't work. Then I tried to revert to B052, but as I wrote before, I had Sokkoban's ROM and after a factory reset, I had B052 with emui 4.0 installed. If you know a working procedure to return to the official build, I suggest you write a guide.
spirto82 said:
I used MEGA-THREAD ALE-L21, ALE-L23, ALE-L02, Converting, Root, Unbrick, Updating, Xposed - chapter 4: Unbricking but didn't work. Then I tried to revert to B052, but as I wrote before, I had Sokkoban's ROM and after a factory reset, I had B052 with emui 4.0 installed. If you know a working procedure to return to the official build, I suggest you write a guide.
Click to expand...
Click to collapse
By the way do you have nandroid backup of official rom? If yes restore it via twrp. This could save you a lot of time. The method I used isn't difficult but it takes time.
On sokoban's rom. Flash the original recovery (recommend that you extract it from the firmware you are going to flash).Use the oldest one (link given below) emui 3.1/Android 5.0 for dual sim
Now put dload file in sdcard/internal memory and upgrade the phone.
If you have balong bug put dload2(rename it to dload) folder in sdcard/ internal memory and upgrade.
Now later you may upgrade to Android 6.0/emui 4
Link for firmware Europe
https://goo.gl/KQ0b6L
Suleiman01 said:
By the way do you have nandroid backup of official rom? If yes restore it via twrp. This could save you a lot of time. The method I used isn't difficult but it takes time.
On sokoban's rom. Flash the original recovery (recommend that you extract it from the firmware you are going to flash).Use the oldest one (link given below) emui 3.1/Android 5.0 for dual sim
Now put dload file in sdcard/internal memory and upgrade the phone.
If you have balong bug put dload2(rename it to dload) folder in sdcard/ internal memory and upgrade.
Now later you may upgrade to Android 6.0/emui 4
Link for firmware Europe
https://goo.gl/KQ0b6L
Click to expand...
Click to collapse
No, I used TWRP backup.
When I tried to extract the images from an official ROM (I have done so many attempts that, I cannot remember which ROM I used), I was able to flash 3 out 4 files. The one I couldn't was the system. When I tried through classic (dload etc), It got stuck at 2% and would give me an error.
But that's all in the past. lol
At this moment, my phone is at the service center with no warranty cause my wifi adapter is not working. From what I've heard, such ptoblems, need mainboard replacement and I cannot afford it at this moment. So I am going to stuck with this phone till it's dead, and of course not going to install any ROM, just because I cannot update anything..... cheers!!!
spirto82 said:
I know that there are some threads over this topic, but there is nowhere a specific answer. I have currently Sokkoban's ROM, and I want to revert to the official build. Can someon provide me with the necessary files in order to flash a stock recovery? I found only this answer, but there are no available links for the files. I would appreciate if anyone could help me. I have ALE L21- dual european edition, running on custom rom based on C432B574.
Thanks in advance.
Edit: tried with the HuaweiUpdateExtractor with the UPDATE.APP file, and flashed the first 3 images (boot, recovery cust) but I get an error while trying to flash the system.img.
Click to expand...
Click to collapse
Well tbh, you can simply convert the system.img using simg2img.exe and then make a flashable zip.
then you can install the system.img withing recovery
Hey guys, I was hoping to flash a pure stock 7.x preferably via twrp.
A buddy of mine a year ago and me to flash pure Nexus for him but now needs a stock phone for business security net purposes.
Is there a link for this? I've searched and have come up short.
I'm guessing it'll have to update bootloader, radio and kernel as well?
I know how to do this via command line. Was really hoping for a way to do it on the fly since this is not my phone and taking a PC for a TWRP ready device is a hassle.
mrkhigh said:
Hey guys, I was hoping to flash a pure stock 7.x preferably via twrp.
A buddy of mine a year ago and me to flash pure Nexus for him but now needs a stock phone for business security net purposes.
Is there a link for this? I've searched and have come up short.
I'm guessing it'll have to update bootloader, radio and kernel as well?
I know how to do this via command line. Was really hoping for a way to do it on the fly since this is not my phone and taking a PC for a TWRP ready device is a hassle.
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Pkt_Lnt said:
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Click to expand...
Click to collapse
Thanks for the links,
But I was really hoping TWRP flash able.
Does TWRP allow flashing these images?
mrkhigh said:
Thanks for the links,
But I was really hoping TWRP flash able.
Does TWRP allow flashing these images?
Click to expand...
Click to collapse
Google search says that TWRP can not flash factory images.
Check the TWRP FAQ if you'd like.
http://teamw.in/FAQ/
Pkt_Lnt said:
Google search says that TWRP can not flash factory images.
Check the TWRP FAQ if you'd like.
http://teamw.in/FAQ/
Click to expand...
Click to collapse
That's what I thought.
Thanks for the links,
But I'm still looking for TWRP flashable if anyone knows of one?
This should be a relatively easy thing so I'm surprised it doesn't exist
there is no reason for it to HAVE to be twrp flashable, just google for "NEXUS ROOT TOOLKIT" you will see on there restore to stock, and re-lock boot-loader, not positive but i think twrp cant flash stock unrooted images, i could be wrong
leo5111 said:
there is no reason for it to HAVE to be twrp flashable, just google for "NEXUS ROOT TOOLKIT" you will see on there restore to stock, and re-lock boot-loader, not positive but i think twrp cant flash stock unrooted images, i could be wrong
Click to expand...
Click to collapse
TWRP can flash a stock image if someone creates it. Unless there is something odd about the nexus, but I doubt that. The only thing that shouldn't be flashed stock would be recovery.
I don't think I need to use some toolkit... adb and fastboot commands are simple enough.
I was hoping to avoid needing a PC at another persons house, I mean that is kinda the point of twrp.
I am surprised this doesn't exist. It does for every other device I've owned. It's honestly just a wiped clean, twrp backup of a stock device with TWRP installed.
If I owned the device I would make it for you guys. It seems something that is lacking that is really handy.
I guess I'll round up a laptop. Thanks for the links and suggestions.
Google has done that for you already. Just unpack the archive you choose and the four images are in there.
https://developers.google.com/android/images
I thought we've already decided I cannot flash these images with TWRP....
mrkhigh said:
I thought we've already decided I cannot flash these images with TWRP....
Click to expand...
Click to collapse
http://www.droidviews.com/now-flash-image-files-using-twrp-2-8-4-0/
Different Google search gave this. I can find nothing else on TWRP site or G+
Appears you can also use FlashFire.
Thanks for the help.
OP could flash one of the stock lite ROMs in the development forum and get the TWRP-flashable stock ROM he's looking for. Danvdh and tupac4u both offer one that is nothing more a debloated stock ROM.
TWRP is able to flash system images from 3.0.2 and on. Just unpack the archive and select install img. Remember to flash stock kernel and newest radio and bootloader too (bare in mind that flashable bootloader is harder to find. You might have to find older one and update the files inside on your own). Afterwards flash stock recovery and lock bootloader with a zip. Now you can just reboot it. It's not that hard.
Lawstorant said:
....bare in mind that flashable bootloader is harder to find....
Click to expand...
Click to collapse
For Nexus 6 https://forum.xda-developers.com/showthread.php?p=59728002/
Thank you.
I went ahead and simply flashed him 100% stock via flash and fastboot.
This is probably resolved now, just adding info though. I had flashed stock 7.1.1 zip downloaded from google via twrp 3.0.3.0. It removed twrp itself too and I was back on stock.
mrkhigh said:
I am surprised this doesn't exist. It does for every other device I've owned. It's honestly just a wiped clean, twrp backup of a stock device with TWRP installed.
I guess I'll round up a laptop. Thanks for the links and suggestions.
Click to expand...
Click to collapse
Try the app FlashFire.
I read here, somewhere, that you need stock recovery to do the update. Since I have flashed another recovery (and rooted and installed Xposed), I'm not sure if I can update to EMUI5.
Furthermore, I'm not even sure how to do the update. The update (b351) is available in FF and checks out as "compatible", but I don't know what the install procedure is. Especially without stock recovery.
Any help or info is much appreciated
yeah, you should flash stock recovery thru ADB and thn try updating...
Not adb but fastboot
thomaskmaagaard said:
I read here, somewhere, that you need stock recovery to do the update. Since I have flashed another recovery (and rooted and installed Xposed), I'm not sure if I can update to EMUI5.
Furthermore, I'm not even sure how to do the update. The update (b351) is available in FF and checks out as "compatible", but I don't know what the install procedure is. Especially without stock recovery.
Any help or info is much appreciated
Click to expand...
Click to collapse
You will also need to reflash the stock boot.img, since you're rooted.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
You will also need to reflash the stock boot.img, since you're rooted
Click to expand...
Click to collapse
Thanks a lot. Any help, perhaps, on where I get that. And the recovery mentioned above?
Oh, and why is it not possible to flash the ROM like if it was a custom one? Just wondering
thomaskmaagaard said:
Thanks a lot. Any help, perhaps, on where I get that. And the recovery mentioned above?
Oh, and why is it not possible to flash the ROM like if it was a custom one? Just wondering
Click to expand...
Click to collapse
That you may need to find your own. Well in custom ROMs, they are designed to work with custom recoveries like TWRP. While in stock, the whole system is inside update.app, which can't be read by a custom recovery.
adriansticoid said:
That you may need to find your own. Well in custom ROMs, they are designed to work with custom recoveries like TWRP. While in stock, the whole system is inside update.app, which can't be read by a custom recovery.
Click to expand...
Click to collapse
Okay, thanks anyways, again. I guess it's time to hunt down those images
thomaskmaagaard said:
Okay, thanks anyways, again. I guess it's time to hunt down those images
Click to expand...
Click to collapse
You can ask @DRUGER for that.
Any links to stock recovery and whatever else needed?
Jstyants said:
Any links to stock recovery and whatever else needed?
Click to expand...
Click to collapse
Check repository thread
Jstyants said:
Any links to stock recovery and whatever else needed?
Click to expand...
Click to collapse
You can also extract stock images from update.app
Hello!
I have a Huawei Mate 9 (MHA-L29C432B190). Yesterday I tried to root my Phone to play Pokemon Go with fake gps. After I managed to root my phone, I couldn't boot into TWRP Recovery Mode anymore.
Because I still had some files I needed to flash I installed Flashfire from the PlayStore. I think after I flashed the newest Magisk version(The flash failed because of Error:1), my device got unrooted. But I think my device is still partly rooted because I can't get into Pokemon Go. Everytime I try to start it I get stuck the loading screen. So right now I can't flash anything to get my root back and I don't have the root to use alternative flash applications. I also tried to start return my phone to stock back with a update.app But it can't be installed. I also can't use "fastboot flash recovery twrp.img" I always get " Writing 'recovery'...FAILED (remote:command can't be used/allowed)". And also after some reboots my oem unlock got turned off and I can't turn it on anymore.
I don't have any ideas anymore what to do. I thought I could root my device, so I could unroot properly with superuser. I tried some other application like KingRoot oder OneClickRoot but both of them don't have a rooting method for the Huawei Mate 9 yet. Btw I don't have a backup because of my naivety.
I hope you guys can help me . I appreciate any ideas
Thanks in advance
In summary what do u want???
Sent from my iPhone using Tapatalk Pro
abuk91 said:
In summary what do u want???
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
Either way I want a method to root my phone without some flash application or I want a way to return my phone to stock. Or a method to fix TWRP would be fine too.
Kyranix said:
Either way I want a method to root my phone without some flash application or I want a way to return my phone to stock. Or a method to fix TWRP would be fine too.
Click to expand...
Click to collapse
Do a Google search for:
"Return to stock (your model number)"
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Do a Google search for:
"Return to stock (your model number)"
I already did and everything I found didn't work
Kyranix said:
Do a Google search for:
"Return to stock (your model number)"
I already did and everything I found didn't work
Click to expand...
Click to collapse
What did you find? What have you tried?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
What did you find? What have you tried?
I tried to do Upgrades with many different stock firmwares for my model
Kyranix said:
What did you find? What have you tried?
I tried to do Upgrades with many different stock firmwares for my model
Click to expand...
Click to collapse
That doesn't tell me anything. That just tells me that you tried flashing.
It doesn't tell me anything about exactly what you tried to flash or what errors you got when you flashed. I need more precise information to help you. Your simple answers aren't helping me understand anything about what you have going on with your device.
What tools have you used? What guide/instructions did you use? What files have you used? What errors did you get? What results did you get. What do mean "didn't work"? "Didn't work" can mean many things.
I might be able to help you fix your device but I can't fix ignorance.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
That doesn't tell me anything. That just tells me that you tried flashing.
It doesn't tell me anything about exactly what you tried to flash or what errors you got when you flashed. I need more precise information to help you. Your simple answers aren't helping me understand anything about what you have going on with your device.
What tools have you used? What guide/instructions did you use? What files have you used? What errors did you get? What results did you get. What do mean "didn't work"? "Didn't work" can mean many things.
I might be able to help you fix your device but I can't fix ignorance.
First I tried to do a force upgrade with a "dload" folder with a update.app file on my sdcard . After booting into this upgrade mode by pressing vol up + vol down + power button my device starts to install the stock firmware, but after it reaches 5% I get the message "Error with installing" and a Link to the same site when you boot into twrp. This always happens no matter which file I use. Next I tried to do a normal upgrade by calling this number "*#*#2846579#*#*" (The dload folder is still on my sdcard). But when I start the software upgrade I get booted into twrp and like I said in my post, always when I try to get into twrp I get stuck on the "Your device is booting screen". This is what I tried and basicly every site on google is saying I should try to do one of these two methods
(Here a guide for example: https://www.getdroidtips.com/full-guide-install-stock-firmware-huawei-smartphone/)
(My file in my last try: https://www.getdroidtips.com/huawei-mate-9-stock-firmware-collections/)
Kyranix said:
That doesn't tell me anything. That just tells me that you tried flashing.
It doesn't tell me anything about exactly what you tried to flash or what errors you got when you flashed. I need more precise information to help you. Your simple answers aren't helping me understand anything about what you have going on with your device.
What tools have you used? What guide/instructions did you use? What files have you used? What errors did you get? What results did you get. What do mean "didn't work"? "Didn't work" can mean many things.
I might be able to help you fix your device but I can't fix ignorance.
First I tried to do a force upgrade with a "dload" folder with a update.app file on my sdcard . After booting into this upgrade mode by pressing vol up + vol down + power button my device starts to install the stock firmware, but after it reaches 5% I get the message "Error with installing" and a Link to the same site when you boot into twrp. This always happens no matter which file I use. Next I tried to do a normal upgrade by calling this number "*#*#2846579#*#*" (The dload folder is still on my sdcard). But when I start the software upgrade I get booted into twrp and like I said in my post, always when I try to get into twrp I get stuck on the "Your device is booting screen". This is what I tried and basicly every site on google is saying I should try to do one of these two methods
(Here a guide for example: https://www.getdroidtips.com/full-guide-install-stock-firmware-huawei-smartphone/)
(My file in my last try: https://www.getdroidtips.com/huawei-mate-9-stock-firmware-collections/)
Click to expand...
Click to collapse
Stock upgrades are not going to work if you are rooted and have TWRP.
Stock updates require stock recovery and an unmodified system partition(no root).
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Stock upgrades are not going to work if you are rooted and have TWRP.
Stock updates require stock recovery and an unmodified system partition(no root).
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Yeah I have already seen, but I can't find an other method to return my Huawei Mate 9 to stock and I don't really have an root.
Kyranix said:
Yeah I have already seen, but I can't find an other method to return my Huawei Mate 9 to stock and I don't really have an root.
Click to expand...
Click to collapse
But you have TWRP, that won't work. You need stock recovery, custom recovery can't flash stock updates.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
But you have TWRP, that won't work. You need stock recovery, custom recovery can't flash stock updates.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
And can you please tell me how to do it then. You can also send me a guide
Kyranix said:
And can you please tell me how to do it then. You can also send me a guide
Click to expand...
Click to collapse
I am not sure why you are not doing this in your device forum?
https://forum.xda-developers.com/mate-9
It seems that there would be more assistance specific to your device.
or did I miss something?
Moscow Desire said:
I am not sure why you are not doing this in your device forum?
https://forum.xda-developers.com/mate-9
It seems that there would be more assistance specific to your device.
or did I miss something?
Click to expand...
Click to collapse
Well thats because I already had problems to post this thread because I am new to xda
Moscow Desire said:
I am not sure why you are not doing this in your device forum?
https://forum.xda-developers.com/mate-9
It seems that there would be more assistance specific to your device.
or did I miss something?
Click to expand...
Click to collapse
Well thats because I already had problems to post this thread because I am new to xda But thanks for pointing it out, I will probably try it there again. Maybe there I will have more luck
Kyranix said:
Well thats because I already had problems to post this thread because I am new to xda [emoji14] But thanks for pointing it out, I will probably try it there again. Maybe there I will have more luck
Click to expand...
Click to collapse
Even new members(less than 10 posts) can post in device specific Q&A fora, new members are only blocked from posting in "development" fora and threads.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hey community,
i googled a lot and searched a lot here, didnt help.
Basically i wiped everything using TWRP by accident... Now i dont have any OS on my P10... I can still go to fastboot mode, erecovery and normal recovery...
any ideas what to do? i already tried dloading the correct firmware, it didnt work.
BaumFX said:
Hey community,
i googled a lot and searched a lot here, didnt help.
Basically i wiped everything using TWRP by accident... Now i dont have any OS on my P10... I can still go to fastboot mode, erecovery and normal recovery...
any ideas what to do? i already tried dloading the correct firmware, it didnt work.
Click to expand...
Click to collapse
https://forum.xda-developers.com/p10/how-to/guide-manual-updgrade-to-update-oreo-t3758286
Did it help, what @glehel posted?
I want to know, because I want to provide this guide also for fixing problems like you have ... or had.
Use dload forced method with first before using scripts.
Just download the correct firmware for your device, if you know the firmware-version you had, use the exact one, because it was approved for installation:
http://pro-teammt.ru/firmware-database/?firmware_model
Extract the the update.zip and put the update.app into a folder called dload on your sdcard.
Start you phone while holding all 3 buttons, this will launch th dload process.
This way you maybe safe some time.
LwannaCM said:
Just download the correct firmware for your device, if you know the firmware-version you had,
Click to expand...
Click to collapse
Is there a way to retrieve the exact name of the installed stock firmware? For my VTR-L09C432 there are multiple versions listed (like 360, 365, etc). Also I am wondering what's the difference between FullOTA-MF / OTA-MF / FullOTA-MF-PF, etc.
tadeussenf said:
Is there a way to retrieve the exact name of the installed stock firmware? For my VTR-L09C432 there are multiple versions listed (like 360, 365, etc). Also I am wondering what's the difference between FullOTA-MF / OTA-MF / FullOTA-MF-PF, etc.
Click to expand...
Click to collapse
No, you can´t check your version, but if you choose an older firmware, you should be fine. Afterwards you can update to a newer version.
The only problem might be, if you already had oreo installed, then you should use it again for restore, because the partitionlayout changed from nougat to oreo.
All version named B1XX are Nougatfirmwares
All version named B3XX are Oreofirmwares.
Choose a FULLOTA for updates, the others are just incremental and won´t help you in your case.
To be exact you should use a FullOTA-MF-PV. The PV stands for public version and all other firmwares are just internal builds from huawei.
LwannaCM said:
Lot's of great information
Click to expand...
Click to collapse
Thanks alot, this was exactly the information I was looking for!
BaumFX said:
Hey community,
i googled a lot and searched a lot here, didnt help.
Basically i wiped everything using TWRP by accident... Now i dont have any OS on my P10... I can still go to fastboot mode, erecovery and normal recovery...
any ideas what to do? i already tried dloading the correct firmware, it didnt work.
Click to expand...
Click to collapse
If you don't want to go back to stock firmware, you also have the option of custom roms such as Lineage OS or one of the others in this forum.
If you go with stock firmware, I suggest you make a Nandroid back-up before you flash TWRP. You can easily do this by booting into twrp instead of flashing (eg: fastboot boot twrp.img). After creating and copying the back-up to your PC, you can proceed with flashing twrp and never have to worry about the softbricking again =).
BaumFX said:
Hey community,
i googled a lot and searched a lot here, didnt help.
Basically i wiped everything using TWRP by accident... Now i dont have any OS on my P10... I can still go to fastboot mode, erecovery and normal recovery...
any ideas what to do? i already tried dloading the correct firmware, it didnt work.
Click to expand...
Click to collapse
Good evening, try this: https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165, it really works, I rescue my P10 from a hard brick