Database Develop

[RECOVERY] Carliv Touch Recovery for Canvas Turbo A250/Clones

Carliv Touch Recovery for Canvas Turbo A250/Clones​
Requirements
1. Phone Rooted and Mobile Uncle Tools (Flash through Phone)
2. Sp Flash Tool(Fflash it from PC)
Downloads
NEW: Carliv Touch Recovery v2.7 (port using stock recovery) Original Thread by @carliv
Old: Carliv Touch Recovery 2.4 (build with CTR 2.4) Original Thread by @yuweng
Instructions (Flash using phone)
1. Download the recovery to your internal sd-card and rename it to "recovery.img"
2. Open Mobile uncle tools and select Recovery Update
3. Flash recovery file
4. Done
Instructions (Flash through SP Flash Tools)
1. Install drivers for your phone and download SP Flash Tools and drivers.
2. Click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device (you can drag from your stock rom folder)
3.Check only recovery.img, preloader and uncheck all others.
4. Switch off your phone (Wait 1 min).
5. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
6. Click the Download option (present on the right of Firmware > Upgrade option) and SP Flash Tools will start looking for your phone.
7. Connect your phone. SP Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
8. After the process completes, a green ring will appear on your device signalling that the process was successful.
9.Disconnect and turn on your phone.
Credits
@carliv
@adrpat
@yuweng
@FSadino​
ALWAYS REMEMBER!!!
I Will Not Be Responsible For Any Bricked Devices or Any Problem So Use It At Your Own Risk.​
XDA:DevDB Information
Carliv Touch Recovery OLD 2.4 & NEW 2.7, Tool/Utility for the Micromax Canvas Turbo A250
Contributors
FSadino, @carliv, @adrpat, @yuweng
Source Code: http://forum.xda-developers.com/android/development/guide-how-to-port-custom-cwm-based-t2970004
Version Information
Status: Stable
Created 2015-02-09
Last Updated 2015-02-11

Reserved
F.A.Q.

* Canvas A210/Clones *​

If you like to see, this is my Carliv Touch Recovery (2.4) http://www.mediafire.com/download/ycj0f0r8wjbhv7i/recovery.img
Aroma File manager don't work with touch (only keys), the rest, the touch it´s ok
flashable with mobileuncle MTK tool
Continua o Bom trabalho !!!

adrpat said:
If you like to see, this is my Carliv Touch Recovery (2.4) http://www.mediafire.com/download/ycj0f0r8wjbhv7i/recovery.img
Aroma File manager don't work with touch (only keys), the rest, the touch it´s ok
flashable with mobileuncle MTK tool
Continua o Bom trabalho !!!
Click to expand...
Click to collapse
device?

Wiko darkfull and clones....

adrpat said:
Wiko darkfull and clones....
Click to expand...
Click to collapse
Where you download it? Can you share the sorce link?

FSadino said:
Where you download it? Can you share the sorce link?
Click to expand...
Click to collapse
it´s made by me ...
the sorce it´s the same as yours
used carlivImageKitchen

adrpat said:
it´s made by me ...
the sorce it´s the same as yours
used carlivImageKitchen
Click to expand...
Click to collapse
Which base carliv-recovery you used? I think mine doesn't have touch

FSadino said:
Which base carliv-recovery you used? I think mine doesn't have touch
Click to expand...
Click to collapse
use "CarlivTouch-recovery-2_4-1080x1920" its more stable
---------- Post added at 10:49 PM ---------- Previous post was at 10:21 PM ----------
I noticed that already exists a final version a Carliv Touch Recovery v2.7 rebuilt from base (cwm 6.0.3.7)
so here you have already compiled by me
DOWNLOAD
you can use this kitchen to compile your way, just edit the res folder in ramdisk. use as sorce my recovery27 in the link above
recalls that the result recovery can not pass 6 Mb
Credits for Carliv (obvious...)

adrpat said:
use "CarlivTouch-recovery-2_4-1080x1920" its more stable
---------- Post added at 10:49 PM ---------- Previous post was at 10:21 PM ----------
I noticed that already exists a final version a Carliv Touch Recovery v2.7 rebuilt from base (cwm 6.0.3.7)
so here you have already compiled by me
DOWNLOAD
you can use this kitchen to compile your way, just edit the res folder in ramdisk. use as sorce my recovery27 in the link above
recalls that the result recovery can not pass 6 Mb
Credits for Carlvic (obvious...)
Click to expand...
Click to collapse
I didnt use this kitchen to compile my recovery but tomorrow i will use carliv_2.7 and kitchen.
If i succed, i will update this thread and give you the right credits
Thanks you so much
greets

@adrpat Now i see were you get the information to port default.prop... I used CTRv2.4 to port automatically carliv_recovery_v2.4 and then i get that info (from default.prop) and port manually carliv_recovery_2.7
Thanks for your help bro.

Kenzo/Kate Firmware **UpToDate-7.3.9-Download**

Kenzo/Kate Firmware by @reemar
The newest firmware there is, made by me:
- it came from latest version of global beta by miui.
- extracted firmware and create zip u to flash at Recovery!
Q/A:
It is VoLTE working on this firmware?
It should work now, but i can't test It becouse my provider has no VoLTE. Try and tell me!
Any risk of relocking bootloader flashing this firmware?
Absolutely not. NO emmc_appsboot.mbn = NO BOOTLOADER F****ups
aka - it will not relock your bootloader
Why i need this firmware?/What it is good for?
If you want to flash a CM13/14/14.1/AOSP N rom, you need to flash this updated firmware first.
it FIXED and improves Signal, Gyroscope, Accelerometer, Magnetic sensors in Redmi Note 3
For what reason i have to choose this firmware instead of another one?
If you have flashed another firmware, you probably have those issues: battery percentage not working, camera autofocus not working, low signal strenght. If not, stay on your firmware.
BUT, this firmware is the great and latest, so u probably should ONLY flash that Firmware
Where are you getting it from?
I'm extracting the firmware from official beta/developers release of xiaomi miui.
i'm taking the firmware only and give it to you to be use, on any rom u want!
How to install:
-reboot to recovery
-wipe whatever u want, (i wipe dalvik and cache cos i'm dirty )
-mount everything u can tick such as firmware and system
-install firmware
-afterwards factory reset is recommended although not must cos we R dirty
-install your rom/gapps/kernel whatever
-reboot and say thanks!!
-Enjoy
Dictionary:
Dirty = dirty flash, not wipe everything, aka 'flash over' cos we lazy to backup and restore stuff's
KENZO = the official global version of Redmi note 3 SD650 and its 150mm height
KATE = the Special Edition version of Redmi note 3 SD650 and its 152mm height
SD = snapdragon motherboard, come on guys, u suppose to know that..
Downloads: Version: 7.3.9 - (09/03/2017)
Kenzo: Mod Edit: Link Removed
Kate: https://forum.xda-developers.com/redmi-note-3/development/firmware-los-13-14-14-1-aosp-m-n-t3557513
*Kate firmware will be maintain by @[email protected]
NEWS - 10/03/17:
reemar said:
UPDATE-UPDATE-UPDATE:
7.3.9 Firmware is out, not many changes but the latest, enjoy!
Click to expand...
Click to collapse

Thank you so much!
I'm on ZCX TWRP and running RR 6.0.1 and i have MIUI backup 6.0.1 (All partitions) can flashing this firmware before restoring backup work?

reemar said:
Kenzo MIUI FIRMWARE 7.2.16:
The newest firmware. i made it:
it came from 7.2.16 version of global beta by miui - the latest
(16/02/2017)
NO emmc_appsboot.mbn = NO BOOTLOADER F****ups
aka - it will not relock your bootloader
here is the download link:
https://www.multiup.org/download/f0...b432/Kenzo_MIUI_FIRMWARE_7.2.16_by_REEMAR.zip
Click to expand...
Click to collapse
Are You made it? Is Just copying some files in your zip from the fastboot images make you developer of this frameware?
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 10:32 AM ---------- Previous post was at 10:28 AM ----------
And i think there is no need of make a new theard every week
Sent from my Redmi Note 3 using Tapatalk

amar2cool99 said:
Are You made it? Is Just copying some files in your zip from the fastboot images make you developer of this frameware?
Click to expand...
Click to collapse
How can he make it.... Offcourse he copied it frm fastboot file
But I thinks he deserves thanks for the same... He is sharing... He is caring.
A lill bit of respect towards him shud b appreciated

Is there any improvement with signals?? I'm on lineage os.
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 10:51 AM ---------- Previous post was at 10:41 AM ----------
You should upload it on Google drive or Androidhost, all your links are full of ad's, download not working on any links.
Sent from my Redmi Note 3 using Tapatalk

Can anyone explain how to make a flashable firmware like this? I want to create my own for my Kate.

dn* said:
Can anyone explain how to make a flashable firmware like this? I want to create my own for my Kate.
Click to expand...
Click to collapse
+1
Here are so many kate-owners...and no one makes firmware-files...this is really sad!

dn* said:
Can anyone explain how to make a flashable firmware like this? I want to create my own for my Kate.
Click to expand...
Click to collapse
Download the latest fastboot version of the latest firmware. Compare to see what's in these flashable firmwares and check the Images directory of the fastboot firmware. Copy them over to the flashable zip. That's probably the easiest way.

dn* said:
Can anyone explain how to make a flashable firmware like this? I want to create my own for my Kate.
Click to expand...
Click to collapse
Maybe the easiest way to do that by downloading custom miui rom like multirom, xiaomi.eu, epic, etc as ur wish then, extract only the firmware-update and meta inf, inside meta inf look for updater-script and edit it with any kind of text based app editor like notepad++ or else, or the meta inf you can take from the strix cm14 firmware, or psyman, etc. Finally repack it again, using rar, 7zip, or else, with .zip format. And enjoy.
Sent from my Redmi Note 3 using Tapatalk

It's possible to flash this firmware on my rom aicp 7.1.1?? Reblock bootloader it???

MIUI beta 7.2.16 firmware is identical to beta 7.2.9 firmware. Those who have already flashed 7.2.9 don't need to flash 7.2.16.

amar2cool99 said:
Are You made it? Is Just copying some files in your zip from the fastboot images make you developer of this frameware?
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 10:32 AM ---------- Previous post was at 10:28 AM ----------
And i think there is no need of make a new theard every week
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
The copying of files = made it, download the 1.5gb,extract files, someone Need to do it
And this time it was me

Adv_Sushil_Tater said:
Is there any improvement with signals?? I'm on lineage os.
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 10:51 AM ---------- Previous post was at 10:41 AM ----------
You should upload it on Google drive or Androidhost, all your links are full of ad's, download not working on any links.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
This server contain uptobox and some other top quality links,
I'll share the links from within in 26 hrs

I'm on I can flash this firmware 13.1 MM CM without reinstalling the whole rom?

LeoYL said:
MIUI beta 7.2.16 firmware is identical to beta 7.2.9 firmware. Those who have already flashed 7.2.9 don't need to flash 7.2.16.
Click to expand...
Click to collapse
How to find same firmware version.
Sorry for question because I don't know.

cool&hot said:
How to find same firmware version.
Sorry for question because I don't know.
Click to expand...
Click to collapse
Verify MD5 of each file, or CRC32. You can easily verify CRC32 using WinRAR.

LeoYL said:
Verify MD5 of each file, or CRC32. You can easily verify CRC32 using WinRAR.
Click to expand...
Click to collapse
Thanks for sharing

WhatsApp can't installed using this firmware

Thanks for your time. I dirty flashed over lineage os 14.1 and it works perfectly.

JaRi1976 said:
WhatsApp can't installed using this firmware
Click to expand...
Click to collapse
What? Whatsapp runs here without any problem...something other maybe wrong?

{Android 7 - EMUI 5.0} VNS-L** C***B360 - links

Small guide to update to B370-B371 Nougat!
1. From anywhere you are (B336, B329, B170-160-130) you have to prepared in dload folder a B160/B161 stock firmware (B160 for DS, B161 for SS).
2. Flash oeminfo/custom.bin (for SS phone or DS phone ) for your phone localisation: C150, C185, C432.
3. After that firmware become corrupted and need to be repaired from dload folder via 3 keys pressed / dialer code / emui error message.
4. Once you have a functional B160/B161 firmware install Firmware Finder (+proxy addon) and check <Use new firmware> and <Use system updater>.
5. Reconfigure WI-Fi connection from indications in Firmware Finder Proxy.
6. Search for B370/B371 firmware (B370 for DS, B371 for SS) of 1,94 Gb size for your phone localisation and send it to updater.
7. From there it is downloaded, verified and reboot to emui updater wich make his work and bring you B370/B371 firmware.
PS: - for flashing oeminfo/custom.bin i recomand this tool which make that work just fine.
- if you have a flash-able zip of oeminfo/custom.bin i recommend flashing with twrp.
VNS-L31C432B380
- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v83116/f1/full/update.zip
VNS-L31C432B381
- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v83105/f1/full/update.zip
VNS-L21C432B380
- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v83144/f1/full/update.zip
VNS-L21C432B381
- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v83119/f1/full/update.zip
VNS-L31C185B360
- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v77099/f1/full/update.zip
- http://update.hicloud.com:8180/TDS/...afnaf/update_data_full_VNS-L31_hw_meafnaf.zip
VNS-L21C185B360
- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v77098/f1/full/update.zip
- http://update.hicloud.com:8180/TDS/...afnaf/update_data_full_VNS-L21_hw_meafnaf.zip
VNS-L23C605B362
- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v77299/f1/full/update.zip
- http://update.hicloud.com:8180/TDS/...-L23_hw_la/update_data_full_VNS-L23_hw_la.zip
VNS-L31C636B361
- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v77171/f1/full/update.zip
- http://update.hicloud.com:8180/TDS/...cseas/update_data_full_VNS-L31_hw_spcseas.zip
VNS-L22C636B360
- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v76989/f1/full/update.zip
- http://update.hicloud.com:8180/TDS/...cseas/update_data_full_VNS-L22_hw_spcseas.zip

Its official version, NO BETA?
Wytapatalkowane P9L
LowSilverBora ?

Charles app metod
in b360 ram is more free

what about C432 localization?

still waiting for that...

I see! After all the beta program was just closed today..

SALVO9 said:
what about C432 localization?
Click to expand...
Click to collapse
[emoji12]

Hipom said:
[emoji12]
Click to expand...
Click to collapse
Yes but I meant this build 360...

How to install? I'm on B336

What would happen if i download 1.2gb version and put update.app into dload folder on c432?

Are they rootable by the same methods for b336?

Coolyou said:
What would happen if i download 1.2gb version and put update.app into dload folder on c432?
Click to expand...
Click to collapse
I would not recommend that because that is a completely different localization.. but if you decide to do that please inform us on the results

saeidf2 said:
Charles app metod
in b360 ram is more free
Click to expand...
Click to collapse
I am On Marshmallow L21c185b150 please tell me how can I install it without any brick etc.

I think number 360 is closer to official version ( P9 official is B377 )
i'm not sure what will happen if dload C185B360 on C432B336
so i'm waiting for L31C183 oeminfo

I can install this ROM on b432?
Wytapatalkowane P9L
LowSilverBora ?

New links for localisation 636 in post #1!

VNS-L31C636B361 has 3 pkg (v=77209)
1.2GB update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v77209/f1/full/update.zip
352mb update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v77209/f1/full/VNS-L31_hw_spcseas/update_full_VNS-L31_hw_spcseas.zip
408mb update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v77209/f1/full/public/update_data_full_public.zip
_______
i find that all B36X has an additional pkg named "public"

Hello
Update c185b360.zip + HwDataFull b336.zip is ok. (Test no Dload)
Good it is written Build number c432b336 but it is normal datafull c432b336.
Systeme is b360 : Android Security Patch Level 1 February 2017 and Kernel Version February 13, 2017.:silly:

Chisetdel31260 said:
Hello
Update c185b360.zip + HwDataFull b336.zip is ok. (Test no Dload)
Good it is written Build number c432b336 but it is normal datafull c432b336.
Systeme is b360 : Android Security Patch Level 1 February 2017 and Kernel Version February 13, 2017.:silly:
Click to expand...
Click to collapse
change the link by filelist.xml , you can get the correct datafull pkg and public pkg urls

pigrass said:
change the link by filelist.xml , you can get the correct datafull pkg and public pkg urls
Click to expand...
Click to collapse
OK THANK YOU,
DATAFULL L31C636B361
http://update.hicloud.com:8180/TDS/...cseas/update_data_full_VNS-L31_hw_spcseas.zip

[ROM][AROMA][A2017X][B03 8.0.0][stock] SL!M7 DF!NR

A2017X_O_B03_AROMA_SL!M7_DF!NR​
Just for fun....no more no less...​
For our dedicated stock users :cyclops:​
Since some users had some troubles to make the stock B03 work on latest magisk and have full system permissions, I thought....let's have a look. Main goal was to have this all-in system permission and magisk working
As it remained fully stock with some adaptions, I hope you'll ENJOY !
Modifications :
* full system r/w
* latest magisk 18.0
* removed most unwanted apps and the ability to remove more
* safetynet pass cts in one take
* flash center clock / remove carrier if needed
* added media
* youtube
* adaway
* full working Dolby Atmos
* wifi working...and ofc all the rest
*.....
Installation : NOTE : for those having trouble installing, flash the twrp 3.2.10 with the universal bootstack (don't forget the modem)
1. unlocked, twrp3218 (non-treble) installed (or compatible one for oreo...)
2. flash A2017GV1.3.0B03_BootStack or your preferred Oreo bootstack or the ones from HERE - mind the MODEM !
3. flash A2017X_O_B03_AROMA_SL!M7_DF!NR - check what you want, let it finish. When you want to center clock and remove carrier name : don't reboot yet and flash 4. (mount SYSTEM), otherwise boot
4. so if you want to center clock and remove carrier flash : A2017X_V1.3.0B03_carrier_clockthemer or only the carrier removed
5. wipe dalvik/cache and boot
6. setup phone and reboot again !
7. you should now have a fully working SL!M7
Contributors :
@raystef66
Credits :
@totmakina
@vzihome
@Tulsadiver
@asderdd
ROM OS Version : OREO 8.0.0
Source : ZTE stock-rom A2017V1.3.0B03 / original ZTE upload/reuploaded Download Center
Kernel : ZTE stock
Security Patch : 2018-11-01
Version Information :
Status : Stable ofc
Created : 2019-02-02
Uploaded : 2019-02-03

reserved

I'm already downloading it. we will see how the battery works also.
I thank @raysteff for creating it and @vzihome for giving me help in b22.

Good job, keep it up

Hell ya man, keep bringing in the goodies!

Awesome! Thanks. Does this still force encrypt data? Will check it out, any chance of doing a b22 sl!m7?
raystef66 said:
A2017X_O_B03_AROMA_SL!M7_DF!NR​
Just for fun....no more no less...​
For our dedicated stock users :cyclops:​
Since some users had some troubles to make the stock B03 work on latest magisk and have full system permissions, I thought....let's have a look. Main goal was to have this all-in system permission and magisk working
As it remained fully stock with some adaptions, I hope you'll ENJOY !
Modifications :
* full system r/w
* latest magisk 18.0
* removed most unwanted apps and the ability to remove more
* safetynet pass cts in one take
* flash center clock / remove carrier if needed
* added media
* youtube
* adaway
* full working Dolby Atmos
* wifi working...and ofc all the rest
*.....
Installation :
1. unlocked, twrp3218 (treble) installed (or compatible one for oreo...)
2. flash A2017GV1.3.0B03_BootStack or your preferred Oreo bootstack or the ones from HERE - mind the MODEM !
3. flash A2017X_O_B03_AROMA_SL!M7_DF!NR - check what you want, let it finish. When you want to center clock and remove carrier name : don't reboot yet and flash 4. (mount SYSTEM), otherwise boot
4. so if you want to center clock and remove carrier flash : A2017X_V1.3.0B03_carrier_clockthemer
5. wipe dalvik/cache and boot
6. setup phone and reboot again !
7. you should now have a fully working SL!M7
Contributors :
@raystef66
Credits :
@totmakina
@vzihome
@Tulsadiver
@asderdd
ROM OS Version : OREO 8.0.0
Source : ZTE stock-rom A2017V1.3.0B03 / original ZTE upload/reuploaded Download Center
Kernel : ZTE stock
Security Patch : 2018-11-01
Version Information :
Status : Stable ofc
Created : 2019-02-02
Uploaded : 2019-02-03
Click to expand...
Click to collapse

vzihome said:
Awesome! Thanks. Does this still force encrypt data? Will check it out, any chance of doing a b22 sl!m7?
Click to expand...
Click to collapse
Thnx!
Encrypted.
I would do a slim B22 yes but as you know, every 15 to 30 days they come with a new update....so the one I would make would be fast-outdated....we'll see

I understand life gets in the way but I appreciate everything that you do for us. :highfive:
raystef66 said:
Thnx!
Encrypted.
I would do a slim B22 yes but as you know, every 15 to 30 days they come with a new update....so the one I would make would be fast-outdated....we'll see
Click to expand...
Click to collapse

hi all
im now on the stock Oreo ROM a2017UV2.0B20.
the boot loader is unlocked.
how i flash TWRP?
i want to try this ROM ?
Ty,,,,,

raystef66 said:
Thnx!
Encrypted.
I would do a slim B22 yes but as you know, every 15 to 30 days they come with a new update....so the one I would make would be fast-outdated....we'll see
Click to expand...
Click to collapse
You have to work faster buddy !
It's ****ing great Papa like always .... Thank so much ... Appreciate it
And on the B22 take your time ( yet hurry up )

It is a good rom. The good thing is that now you can write. It is a rom to take into account if we like the stock roms. Very complete.

Tnx a lot for your work. Your roms are the best )
We have a way to disable the encryption? I really hate the forced encryption because it slows the phone a little bit

dumyro said:
Tnx a lot for your work. Your roms are the best )
We have a way to disable the encryption? I really hate the forced encryption because it slows the phone a little bit
Click to expand...
Click to collapse
I've format data partition before installation, and then my phone was not encripted
Sent from my [device_name] using XDA-Developers Legacy app

raystef66 said:
Thnx!
Encrypted.
I would do a slim B22 yes but as you know, every 15 to 30 days they come with a new update....so the one I would make would be fast-outdated....we'll see
Click to expand...
Click to collapse
thanks for this,i love the stock roms.On P4da there is a slim version based on b22.The mifavor firmwares are really good.
china works on stable version now

I have problem with this rom. After installing it stuck on boot logo. I came from Lineage 16, deleted Vendor partition, format other all and it not help :/. I have Axon A2017G. OFC I used every file provided in this thread (Recovery, Bootstack).

Hi raystef66,
I'm struggling to install this new version of the rom. Flashing the posted TWRP ends up with a non booting recovery.
So I was trying to flash another version of TWRP directly trom twrp.me website (3.2.3-0), this boots but flashing the rom ends up wit non booting system.
Is it necessary to do something as a prerequisite for this rom when changing from SL!M V1.2B10 ?
Thnx in advance

paradix^ said:
Hi raystef66,
I'm struggling to install this new version of the rom. Flashing the posted TWRP ends up with a non booting recovery.
So I was trying to flash another version of TWRP directly trom twrp.me website (3.2.3-0), this boots but flashing the rom ends up wit non booting system.
Is it necessary to do something as a prerequisite for this rom when changing from SL!M V1.2B10 ?
Thnx in advance
Click to expand...
Click to collapse
try other bootstacks in the OP like b20v1 by DrakenFX

atakan33 said:
try other bootstacks in the OP like b20v1 by DrakenFX
Click to expand...
Click to collapse
Ok, but should I need a special bootstack flashed to make TWRP work?

@Predatorhaze could you point me to where the room is at? I would like to try it out. Thanks!
raystef66 said:
Thnx!
Encrypted.
I would do a slim B22 yes but as you know, every 15 to 30 days they come with a new update....so the one I would make would be fast-outdated....we'll see
Click to expand...
Click to collapse
Predatorhaze said:
thanks for this,i love the stock roms.On P4da there is a slim version based on b22.The mifavor firmwares are really good.
china works on stable version now
Click to expand...
Click to collapse

Great work! Does this by any chance support wifi-calling/VoLTE? I think Unjustified said at one point that those would only work on stock roms, so if those work on this rom that would be amazing.

[CLOSED][rom] Samsung Experience 8.5 spreadtrum & exynos Game Life

ROM Samsung Experience 8.5 Game Life for Samsung J3 V3
?????Modo Nigth Samsung..???
(SPREADTRUM & EXYNOS)
(New links) Optimize online Game in Samsung J3 2016 ¡without root!
Configuration PUB Gfxt tool for Android
Video en español abajo
Mod for Free Fire Full HD !!!???
Root magiks:
View attachment 4722395
??!SE 8.5 Style S9 v1 ¡?Rom Samsung J3 2016 J320M/G/M/F/FN & J320AZ,AG,A,w8 & J321AZ
Caution
-Read the ROM installation instructions correctly
-Error reports without the device variant and the records can not be considered errors
-Be sure to provide detailed information when reporting errors
-Press the 'Thank you' button instead of saying it will keep me motivated to do more
Click to expand...
Click to collapse
Screenshot:View attachment 4721443 View attachment 4721444 View attachment 4721445 View attachment 4721446
Click to expand...
Click to collapse
General Features
If you served the ROM you want to help me like me, you can help me by donating US $ 1,2,3,4,5 .......
V1
-Based on compilation J320AZTUS3BQL1, in base J320AZTUS3AQG1 (AQG1)
_Security patch December
-Completely deodexed
-Without secondary application only those of samsung
-Multiwindows
-Compatible with models [J320AZ/W8/ AG / A] Also for J321AZ
-[Battery LIFE without power saving mode activated]
-Playing 8 to 6 hours in a row
-Social networks and youtube 10 to 8 hours in a row
-Normal use from 18 to 16 hours
-Games like the fire free, PUBG Mobile, World of Tanks Blitz go fluid
V2
-Full Without secondary application only those of samsung
-Bootanimation black ATT
-Different sound when starting
v3
Added:
-Game Home
-Game Tuner
-Game ToolS
To activate Game Launcher after starting it go settings> applications> search Game Laucher and activate it
There is still no supersu method in 7.1.1you can install xposed but it will fail Galaxy theme recommend installing a theme first after xposed
Bug J321AZ/0AZ/AG/G F/FN and G
Solution:
After installing the custom Rom, the network will take a long time to grab Solution go settings> Mobile networks> Access point name> select the 2 option, they give in to add after they restart their cell phone and install any theme
Installation steps for J320AZ/AG/A J321AZ
On android 6.0.1
1- Be completely in the complication J320AZTUS3AQG1 . J320AUCS3AQG1 and J320AUES2APJ2 on J321AZ AQG1
2-Follow these steps to be superuser https://forum.xda-developers.com/galaxy-j3-2016/how-to/root-j320a-j320az-alternate-method-t3627225
3-Then download and install flashfire
4-Download the Custom ROM and pass it to the micro sd or internal memory
5-To use flashfire go settings change the date to year 2013
6-Open flashfire give permissions, then select flash zip or OTA, they look for the downloaded file they select it, select Mount/system read/ write
7-select wipe , they select the first 3, they select internal storage and select the pigeon
8=Selec FLAHS and OK
9=Wait 10 to 20 minutes and enjoy
10=Well, if you install the rom, the files of the internal memory will not be deleted. Reset the factory cell phone from settings
On android 7.1.1
1-Use odin to downgrade to android 6.0.1 After unzipping the folder come 4 files select in the corresponding places, same as in the csc file you will have to decompress it with 7-zip and odin select PIT and look for the PIT in the csc folder as you select it when you return to 6.0.1
do not download more of that compilation if it's not going to leave error
2-Then remove the battery from your cell phone, put it back again press home key plus volume up button more power button select restart factory and restart
3-Follow the steps of android 6.0.1
Below for models M / G / F / FN
Downloads: {Mod edit}

Mod Edit: Please DO NOT quote the entire OP
edgar43 said:
ROM Samsung Experience 8.5 Game Life for Samsung J3 V3
Modo Nigth Samsung..
(SPREADTRUM & EXYNOS)
......................................
Click to expand...
Click to collapse
can i use it on j320G sir? or not?

Greenpeanut said:
can i use it on j320G sir? or not?
Click to expand...
Click to collapse
If you can use it with that model

Mod Edit: Please DO NOT quote the entire OP
edgar43 said:
ROM Samsung Experience 8.5 Game Life for Samsung J3 V3
Modo Nigth Samsung..
(SPREADTRUM & EXYNOS)
......................................
Click to expand...
Click to collapse
youre back

Also please release one ui v1.. I want to try it really bad.[/QUOTE]
Yes, I will upload it bro but it is for the samsung exynos

edgar43 said:
Also please release one ui v1.. I want to try it really bad.
Click to expand...
Click to collapse
Yes, I will upload it bro but it is for the samsung exynos[/QUOTE]
j320fn? And which Android?

V3 for j320FN?

Bootloop for j320FN, the phone starts, arrives at the welcome screen, where it lets you choose the languages, and then restarts, I have already tried to do wipe data and wipe cache and davilk cache but the rom remains in bootloop. ( before installing this rom I had lineage os and not the stock firmware )

MR207 said:
Bootloop for j320FN, the phone starts, arrives at the welcome screen, where it lets you choose the languages, and then restarts, I have already tried to do wipe data and wipe cache and davilk cache but the rom remains in bootloop. ( before installing this rom I had lineage os and not the stock firmware )
Click to expand...
Click to collapse
You're sure you have flashed the correct files? Have you also flashed the" fix file " before flashing the rom?
---------- Post added at 12:23 PM ---------- Previous post was at 12:23 PM ----------
MR207 said:
Bootloop for j320FN, the phone starts, arrives at the welcome screen, where it lets you choose the languages, and then restarts, I have already tried to do wipe data and wipe cache and davilk cache but the rom remains in bootloop. ( before installing this rom I had lineage os and not the stock firmware )
Click to expand...
Click to collapse
Also which version have you installed? And have you used the turtorial?

2gg1 said:
You're sure you have flashed the correct files? Have you also flashed the" fix file " before flashing the rom?
---------- Post added at 12:23 PM ---------- Previous post was at 12:23 PM ----------
Also which version have you installed? And have you used the turtorial?
Click to expand...
Click to collapse
I have lineage os with root permissions, I installed flashfire and I followed the tutorial to install the rom. The version I tried is V2 and V3 FN model. I also tried using twrp but it doesn't work anyway. I will try to restore the stock firmware with odin and follow the tutorial step by step

MR207 said:
I have lineage os with root permissions, I installed flashfire and I followed the tutorial to install the rom. The version I tried is V2 and V3 FN model. I also tried using twrp but it doesn't work anyway. I will try to restore the stock firmware with odin and follow the tutorial step by step
Click to expand...
Click to collapse
Did you flashed the fix file before on twrp

2gg1 said:
Did you flashed the fix file before on twrp
Click to expand...
Click to collapse
No?, where is link of fix file?

MR207 said:
No?, where is link of fix file?
Click to expand...
Click to collapse
Here: {Mod edit: Link removed}
I have found it on the developers youtube channel
Please tell if it worked now

2gg1 said:
Here: ...
I have found it on the developers youtube channel
Please tell if it worked now
Click to expand...
Click to collapse
Don't work
---------- Post added at 10:48 AM ---------- Previous post was at 10:43 AM ----------
F and FN are 2 differents model. If rom Is the same for both i think that i need to install the PHN baseband for FN.

MR207 said:
Don't work
---------- Post added at 10:48 AM ---------- Previous post was at 10:43 AM ----------
F and FN are 2 differents model. If rom Is the same for both i think that i need to install the PHN baseband for FN.
Click to expand...
Click to collapse
Try that. If i remember i have installed the phn then the fix then the rom

2gg1 said:
Try that. If i remember i have installed the phn then the fix then the rom
Click to expand...
Click to collapse
Yea it works, FN model needs the phn baseband. but the rom is android 6.0.1 not 7.1

works on j320h????????????

MR207 said:
Yea it works, FN model needs the phn baseband. but the rom is android 6.0.1 not 7.1
Click to expand...
Click to collapse
what phn baseband i need pls

when i used the rom it was great but i had a problem, galaxy themes and galaxy store don work
can any one help me