Database Develop

mute-when-flipped-face-down doesnt work

the mute-when-flipped-face-down doesnt work!! (new phone)
so i checked for this in the registry according to this well-known-tweak:
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"
but it is set to 1, so it should work, but it just doesnt.
I have it lying flat face-down on a very horizontal desk, but it still rings!
any suggestions?
thanks!

Flip off
I had the same misunderstanding. The flip ringer silence functions by turning the phone when it begins to ring and laying it face down. Hope this helps.

pilib said:
I had the same misunderstanding. The flip ringer silence functions by turning the phone when it begins to ring and laying it face down. Hope this helps.
Click to expand...
Click to collapse
hi m8!
thanks for your reply
1. then this whole function becomes much less interesting i think
2. i tried your suggestion: didnt work as well.

it should be nice to have it muted while display face the table but the real usage gives sense as well ... the phone is ringing you look who is calling and then put it back on table to mute it ... if you want to have permanent mute then simply activate vibrate / silent mode ...

babedieboe said:
hi m8!
thanks for your reply
1. then this whole function becomes much less interesting i think
2. i tried your suggestion: didnt work as well.
Click to expand...
Click to collapse
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"

andres_lol said:
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"
Click to expand...
Click to collapse
FaceDownMuteRing is set to 1 default (as i have it now) and it doesnt work now.
You say i should set it to 0: that doesnt make sense. 1 = true,
in this case meaning to mute when facedown......
Not?

Mine is set to 0 and does not work....
R

babedieboe said:
FaceDownMuteRing is set to 1 default (as i have it now) and it doesnt work now.
You say i should set it to 0: that doesnt make sense. 1 = true,
in this case meaning to mute when facedown......
Not?
Click to expand...
Click to collapse
i have seted in 1 and works ok, already check it

Mine is set to 1 and works, if i set it to 0 it doesnt work.
Seems like you have a duff phone there, id send it back for a replacement or get them to fix it.

ok - set mine to 1, did not work. Figured a reg change might need a soft reboot - which I did and now - IT WORKS
R

rakh1 said:
Mine is set to 0 and does not work....
R
Click to expand...
Click to collapse
Are you aware that this doesn't work if you are called and your phone is already facing down!? This function requiers you to flip the phone face down when you get a call (from the starting position when it is on its back). If it is facing down already you need to flip the phone 360 degreeds over its longest axis to mute it.
This function is not suitable for meetings in which you cannot be disturbed. In that case you need to put it on silent or vibrate mode manually in the config menu.

aware of that yes.
set to 1, reboot, tried
set to 0, reboot, tried
set to 1, reboot, tried
nothing works.....mmm

Do your accelerometors work? Does the web and photos move around the screen as you rotate the device? Does the ball game work?
I simply changed the value from 0 to 1 and reset.
Left the phone face up on my desk and called it. Then turned it face down and the ring was muted...
R

yes, the game works....
IT WORKS NOW!
i reinstalled (hard reset) and all ok now.......mmm

babedieboe said:
yes, the game works....
IT WORKS NOW!
i reinstalled (hard reset) and all ok now.......mmm
Click to expand...
Click to collapse
i tried it after 3 hard resets! each time worked only once till the first soft reset. after a soft reset the value in the registry stayed "tweaked" but with no effect.

Mine is set to 1 and it works gr8

mine works no problem... make sure you are using the new ROM's. (and btw having the phone so that it is silent when ever the phone is face down is silly, coz it may be in you pocket (or hand bag 4 women) and face down and then it wont ring... no good. the default method, of looking at the screen and then turning in face down is a good idea tho...)

I had the same problem - didn't work no matter what i did. Recently i updated the ROM to 1.93 and this fixed the problem. Works like a charm now.

205_lacoste said:
This function is not suitable for meetings in which you cannot be disturbed. In that case you need to put it on silent or vibrate mode manually in the config menu.
Click to expand...
Click to collapse
You can set this to go to vibrate automatically if you're in a meeting (that's in your schedule)

KukurikU said:
i tried it after 3 hard resets! each time worked only once till the first soft reset. after a soft reset the value in the registry stayed "tweaked" but with no effect.
Click to expand...
Click to collapse
kukuriku, my dear friend let me help you:
in the tweaks thread there is a mistake. registry should be 1 not 0 (like somebody already write here). that's also the default. use your head m8!

Screen Off DUring Calls - Still

Hi there,
I have done the two tweaks recommended to stop the screen going off during calls but now have the following situation:
The screen still goes off during calls, but if I turn the screen back on once, it will stay on for the duration of the call, a feature I thought had been introduced in the new official HTC ROM. I am still on 1.37.405.1 or something like that, the one that came with my Orange Diamond originally.
However, turning the screen back on only brings it back to a low-light status, as if the screen was locked..?
All very confusing. Anyone have any ideas?
Thanks.

I just rest my thumb on the touch sensitive centre button and my screen stays on, no tweaks .I am still on the Orange stock rom.

I also have this problem after doing the two tweaks.
Even upgraded to the 1.93 CHT rom.
Any one encountered this also ? Any solution ? Thanks!

http://forum.xda-developers.com/showthread.php?t=398265
Point no.8 would solve this problem

mitto said:
http://forum.xda-developers.com/showthread.php?t=398265
Point no.8 would solve this problem
Click to expand...
Click to collapse
No it doesn't, the screen still goes off right after starting the call.

Have you soft reset the device after you have edited the registry?
Tried both ways?
It works on my diamond.

It used to work but after upgraded to ROM 1.93.
The tweak no longer work. Any one have the same problem ?

I would have thought u need to reapply reg fix as when u update rom it restore orig settings

Originally Posted by L o r d R a j
Done.
This is what I did
* HKLM\Drivers\BuiltIn\RIL\BatteryTimeoutInCall set to = 0 default = 5
* HKLM\Drivers\BuiltIn\RIL\BatterySuspendTimeoutInCall to = 0 default = 5
* HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall to = 0 default = 0
* HKCU\ControlPanel\Phone Sleep to = 0 default = 1
* HKCU\ControlPanel\Backlight\LightSensorPollingEnable to = 0 default = 1
That done..
Restart the phone (I waited for a minute or so)
Backlight remains on now.
Then, just for the hell of it.. went back into the registry and set back the default values for:
lightsensorpollingenable
Phone sleep
Fast dormant
Checked again.. still works.

I decided to test all of those settings separate, the one that fixes it is the HKCU\ControlPanel\Backlight\LightSensorPollingEnable. All the others did nothing.

Faded colours

Does anyone have this issue? The colours i see are like very faded. The white is kinda yellow-ish.

bibimixer said:
Does anyone have this issue? The colours i see are like very faded. The white is kinda yellow-ish.
Click to expand...
Click to collapse
Maybe livedisplay setting ?

I have this yellow whites too. Even with live display set on day or turned off

Izmash said:
I have this yellow whites too. Even with live display set on day or turned off
Click to expand...
Click to collapse
Turn it on and tune it cold.

MUG3NHC said:
Turn it on and tune it cold.
Click to expand...
Click to collapse
It's not working. When I set it on, then change a setting (color calibration or the color temperature) it doesn't do anything, even with a reboot. Any idea why ?

Izmash said:
It's not working. When I set it on, then change a setting (color calibration or the color temperature) it doesn't do anything, even with a reboot. Any idea why ?
Click to expand...
Click to collapse
The slider for night will only show a difference at night and the same with the one for day. Drag and release to see the difference

MUG3NHC said:
The slider for night will only show a difference at night and the same with the one for day. Drag and release to see the difference
Click to expand...
Click to collapse
I knew that, it just wasn't working because I was in battery saving mode. Anyway thanks for the help

How to port Lollipop Rom to another Bay Trail tablet? (Touchscreen problems).

Hi, I've been trying some Lollipop Roms on my Ramos I9s, because it's limited to 4.4.4. Almost same specs, except for the screen size and resolution. Everything works perfect, but I can't use them because I have problems with the touchscreen: only a quart of the screen is touchable, and it's necessary to flip the tablet to touch other parts of the interface. The X and Y axis are inverted too. I used the getevent -p command with adb:
(WITH MY STOCK 4.4.4 ROM)
add device 2: /dev/input/event5
name: "goodix_ts"
events:
KEY (0001): 014a
ABS (0003): 0030 : value 0, min 0, max 255, fuzz 0, flat 0, resolution 0
0032 : value 0, min 0, max 255, fuzz 0, flat 0, resolution 0
0035 : value 0, min 0, max 1920, fuzz 0, flat 0, resolution 0
0036 : value 0, min 0, max 1200, fuzz 0, flat 0, resolution 0
0039 : value 0, min 0, max 255, fuzz 0, flat 0, resolution 0
(WITH TECLAST 5.0 ROM)
add device 2: /dev/input/event5
name: "goodix_ts"
events:
KEY (0001): 014a
ABS (0003): 0030 : value 0, min 0, max 255, fuzz 0, flat 0, resolution 0
0032 : value 0, min 0, max 255, fuzz 0, flat 0, resolution 0
0035 : value 0, min 0, max 4096, fuzz 0, flat 0, resolution 0
0036 : value 0, min 0, max 4096, fuzz 0, flat 0, resolution 0
0039 : value 0, min 0, max 255, fuzz 0, flat 0, resolution 0
The differences are the max numbers: 1920x1200 (display resolution) on stock kitkat, and 4096x4096 on the Teclast rom. Is there a way to config the event5 or the touchscreen module, and make it compatible with my screen? Thanks for the help.

Screen remains yellow after disabling blue light filter

I've had my Note 9 (SM-N960U) for a month, and I love it. However, one annoying issue keeps popping up. I have the blue light filter automatically enabled between sunset/sunrise. Sometimes the screen remains yellow/red after sunrise. When that happens, I manually toggle the blue filter, but the screen retains a yellow/red tint. I can reboot the phone, but it never recovers the stock blueish/white tint. The only solution that I have found is a factory reset, which returns the color temperature to normal. This has happened twice, and it is a major PITA restoring all of my apps and settings. FWIW, I am on the latest firmware and April security patch. Anyone else have this issue?

any fixes?

iamkani said:
any fixes?
Click to expand...
Click to collapse
Cause of Night Mode triggered, see this fix:
https://forum.xda-developers.com/galaxy-s9-plus/help/weird-night-mode-type-issue-t3764161

iamkani said:
any fixes?
Click to expand...
Click to collapse
If you use the Google books app see if you have the night mode set on in that app. I was having this weird issue and I saw that I had set the tone to night mode for night time reading. That was causing my whole phone to become yellow instead of only doing it to the app.