Database Develop

[rom] [xt901] [4.3] [unofficial] cm10.2 [4g fix] [us cellular] [10/6/2013]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (JB), which is designed to increase performance and reliability over stock Android for your device.
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS
First time installing CyanogenMod 10.2 to your Motorola Electrify M, or coming from another ROM:
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- WIPE CACHE & DALAVIK CACHE (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Reboot
DOWNLOAD:
ROM - http://titanroms.com/upload - 10/6/2013
GAPPS - http://goo.im/devs/BaNkS/GApps%204.3

RESERVED

Reserved one more time

This ROM is Dev'd by ekylypse, a new user here, however he is known on other forums. Once he has 10 posts I will have him switched over to the OP.

mark for xt901 cm 10.2

[ROM][Marshmallow][6.0][Unofficial] crDroid Android

crDroid build will always mainly be based on CyanogenMod with some extra and few features (Cool and useful)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
CREDITS
CM Rom
Slim Rom
Omni Rom
Many More.....
Kernel Credit Varun Chitre
Download:
Sprout4
Sprout8
Gapps:
Open Gapps
Screenshot : See on Screenshot tap
First time installing crDroid :
- Make sure you're running a proper working Recovery (TWRP)
- Copy GApps and crDroid zip to your internal SDCard
- Boot into Recovery
- Format factory,Wipe cache,data,system
- Flash crDroid zip
- Flash GApps zip
- Flash SuperSU (not mandatory. We have CyanogenMod su access inside)
- Reboot
- Don't restore Apps using Titanium Backup!
Source Code : https://github.com/crdroidandroid
XDA:DevDB Information
Crdroid-6.0, ROM for the OEM Cross Device Development
Contributors
nazmul.rr
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-11-13
Last Updated 2015-11-13

Bugs and screenshots?

hp5942 said:
Bugs and screenshots?
Click to expand...
Click to collapse
See screenshot tap

does this have the same bug of data not working when single sim present (as in CM13 beta)?

Very smooth rom... Data was working for me even with one sim. Sim switching fixed (present in CM12.1) and no lag in recorded videos

There is no Data bug :v

Is there CM Theme Engine

crdroid updated

nazmul.rr said:
crdroid updated
Click to expand...
Click to collapse
Can you plz provide changelog for the build.

nazmul.rr said:
crdroid updated
Click to expand...
Click to collapse
is data working?

sprout8 support please.

hanuraiga said:
is data working?
Click to expand...
Click to collapse
Not working on Airtel. Checked both on GSM and WCDMA mode. It is not working at all.

nazmul.rr said:
crdroid updated
Click to expand...
Click to collapse
bro what about tweaks can you giv me screenshot of tweaks?

I can't use busybox here..How to install busybox.When I tried to install ad away it says that it's s-on like HTC mobile.I don't get it.What does it mean?

PuLKit4xd said:
Not working on Airtel. Checked both on GSM and WCDMA mode. It is not working at all.
Click to expand...
Click to collapse
Try using legacy DHCP setting from developer options.

Has some problem on data connection for me

Crdroid updated & added sprout8 link

Looks good, nice work there

updated

Thanks...
Nice work man

[ROM][ham][7.1.x][OFFICIAL][WEEKLIES] Lineage Android Distribution for ZUK Z1

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
KNOWN ISSUES
- Report with logs
!!! BUG REPORTS WITHOUT LOGS WILL BE IGNORED !!!
Android: adb logcat
Radio: adb logcat -b radio
Kernel: adb shell dmesg
Full Bugreport: Developer Menu -> Bugreport
HOW TO INSTALL LINEAGEOS
- Make sure your phone is running the firmware last shipped on cm-13.0.
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- IMPORTANT: Do a Factory Reset. (Wipe data & cache)
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
* * * MODERATOR WARNING: users who violate FORUM RULES in this thread will have their account restricted or disabled without further warning! Please follow Forum Rules when posting * * *
- Reboot
DOWNLOADS
LineageOS:
https://download.lineageos.org/ham
Google Apps:
OpenGApps (recommended: arm, 7.1.1, nano)
SOURCECODE
Device tree: https://github.com/LineageOS/android_device_zuk_ham
Kernel: https://github.com/LineageOS/android_kernel_cyanogen_msm8974
HOW TO CONTRIBUTE
Use our code review system to send patches: https://review.lineageos.org
HOW TO BUILD
- repo init -u ssh://[email protected]/LineageOS/android.git -b cm-14.1
- add local manifest to .repo/local_manifests/
- repo sync -j4
- . build/envsetup.sh
- brunch ham
Local manifest:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="LineageOS/android_device_qcom_common" path="device/qcom/common" remote="github" />
<project name="LineageOS/android_device_zuk_ham" path="device/zuk/ham" remote="github" />
<project name="LineageOS/android_kernel_cyanogen_msm8974" path="kernel/cyanogen/msm8974" remote="github" />
</manifest>
SUPPORT ME
Do you like my work? Consider donating me some beer!
​
XDA:DevDB Information
LineageOS for Ham, ROM for the Lenovo Zuk Z1
Contributors
ashwin007
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2017-03-07
Last Updated 2017-03-07

Thanks man for your work and also for bringing Official Los 14.1 for this device:victory:

Good job.

Already installed.
Thanks a lot..
Sent from my ZUK Z1 using Tapatalk

needs a fresh install. will not install over unofficial Lineage.

Thanks man!
Inviato dal mio ZUK Z1 utilizzando Tapatalk

Do I need to install CM 13 or would a clean flash over unofficial CM 14.1 work?

Really great to see official LineageOS for ham :good:

ddishu2 said:
Do I need to install CM 13 or would a clean flash over unofficial CM 14.1 work?
Click to expand...
Click to collapse
Clean flash over CM14.1 unofficial.

Finally!! Thanks a lot.

Great. Thanks a lot. Can I try a dirty install over unofficial Lineage 30.1.17?

Thanks a lot.
bug:
ipv6 usb tethering not working.
it possible to add ipv6 USB tethering in this ROM ??
any unofficial patch available?

Thank you @ashwin007 ! Great job, everything is perfect here.
One question, can we make FINGERPRINT UNLOCK without pressing the button? To be able to use touch home button without pressing it.
It was possible on the unofficial rom and as well on official LOS14.1 for Mi5 it's working perfectly.
If it's not possible can you provide separated fix?
Thank you!

At last. Thanks for great job. LOS 14.1.1.

I am getting some error while flashing this ROM.. please check out my screenshot and guide me.

tanmeshn said:
I am getting some error while flashing this ROM.. please check out my screenshot and guide me.
Click to expand...
Click to collapse
Mate you sure you're not directly coming from COS? If you are, you might want to flash MM Firmware first and then try flashing the zip.
This error usually occurs when the present firmware isn't up to date.

I am facing very slow charging rate..

Shivver said:
Thank you @ashwin007 ! Great job, everything is perfect here.
One question, can we make FINGERPRINT UNLOCK without pressing the button? To be able to use touch home button without pressing it.
It was possible on the unofficial rom and as well on official LOS14.1 for Mi5 it's working perfectly.
If it's not possible can you provide separated fix?
Thank you!
Click to expand...
Click to collapse
it doesn't need to press. Just touch.
---------- Post added at 06:27 AM ---------- Previous post was at 06:24 AM ----------
sahu.prashant said:
Mate you sure you're not directly coming from COS? If you are, you might want to flash MM Firmware first and then try flashing the zip.
This error usually occurs when the present firmware isn't up to date.
Click to expand...
Click to collapse
here too. i flashed it after wipe /system /data /cache
so i disabled check zip...

sahu.prashant said:
Mate you sure you're not directly coming from COS? If you are, you might want to flash MM Firmware first and then try flashing the zip.
This error usually occurs when the present firmware isn't up to date.
Click to expand...
Click to collapse
Mate I tried many Roms.. and currently I am using CM13 latest and last official nightly ... Don't know why I am getting that error.

tanmeshn said:
Mate I tried many Roms.. and currently I am using CM13 latest and last official nightly ... Don't know why I am getting that error.
Click to expand...
Click to collapse
Now that's funny.... :silly:
Like @magnet1215 suggested you can try disabling check zip signature in TWRP settings.
If that doesn't work either, I'm sorry I'm outta ideas then.

[ROM][CM14.1][UNOFFICIAL] LineageOS 14.1 for Galaxy S7 Edge (hero2lte)

// Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
// Info
It's unnoficial LineageOS14.1 for Galaxy S7 Edge (hero2lte)
I strongly recommend to perform a backup of your current rom before installation.
LineageOS 14.1 has been closed https://www.lineageoslog.com/build/scheduler
I will continue to give support
Currently LineageOS 14.1 for Galaxy S7 is receiving only minor changes (mostly security fixes).
Regarding going from unofficial builds to official - or official to unofficial builds that can be done by as described here:
https://wiki.lineageos.org/signing_builds.html#test-keys-to-official-or-vice-versa
To migrate from unofficial build to official - or official to unofficial builds:
1. download this script
2. ensure that file has LF (UNIX-style) line endings
3. put it on your phone
4. reboot into recovery
5. make a full backup!
6. go to the folder where script is located
7. run: ./migrate.sh official
8. WARNING! rebooting phone now would end in data corruption!
9. flash the official build now (after flashing official build it is safe to reboot)
10. flash Gapps (and any addons)
11. reboot
you can also stay with my build, will continue to give support
What’s working
Audio
Bootanimation
Brightness
Bluetooth
Camera
Microphone
Fingerprint reader
NFC
Wi-Fi ( do not enable root, otherwise WiFi-Direct does not work)
LED
RIL (calls, sms, microphone, data)
All sensors
GPS
SD Card
- make a full Backup from your device
- Full wipe device (system, data, cache, dalvik)
- Install your Build
- Install Gapps
- Wipe Cache and Art/Dalvik
- Reboot
- Wait for 1st boot
- Enjoy
Update can be downloaded to your mobile phone via lineageos_updates and
if it is not possible to install the update automatically.
(Select in twrp) install/select Storage/internal storage/superordinate folder/data/lineageos_updates.
OTA
https://www.los-legacy.de/14.1/hero2lte
update: Monthly
Telegram Chat for hero2lte and herolte
if ota is not available you can download from here
https://androidfilehost.com/?w=files&flid=272450
Download gapps ama64
https://opengapps.org/​
// Donate Us
PayPal.Me
// Source Code
https://github.com/LineageOS
https://github.com/Exodusnick
// Partners & Friends for German
https://www.los-legacy.de/partners/for German
https://android-freaks.de/forum/thread/46-rom-unofficial-samsung-s7-herolte-hero2lte-lineageos-14-1/
XDA:DevDB Information
[ROM][CM14.1][UNOFFICIAL] LineageOS 14.1 for Galaxy S7 Edge (hero2lte), ROM for the Samsung Galaxy S7 Edge
Contributors
Exodusnick
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2018-06-01
Last Updated 2020-11-06

Reserved

the next build will come today

see OP
Changelog 01.06.2018

you can now update over ota

Is this rom by any chance only for G935F users? I have a G935S and I still get the "Error 7" despite cleanly installing and using the method to fix it.
Even though most roms on this forum work fine, other than this one.

@sambow23
TARGET_OTA_ASSERT_DEVICE := heroltebmc,herolteskt,heroltektt,heroltelgt,heroltexx,herolte
TARGET_OTA_ASSERT_DEVICE := hero2ltebmc,hero2lteskt,hero2ltektt,hero2ltelgt,hero2ltexx,hero2lte
is your device listed ?

Exodusnick said:
@sambow23
TARGET_OTA_ASSERT_DEVICE := heroltebmc,herolteskt,heroltektt,heroltelgt,heroltexx,herolte
TARGET_OTA_ASSERT_DEVICE := hero2ltebmc,hero2lteskt,hero2ltektt,hero2ltelgt,hero2ltexx,hero2lte
is your device listed ?
Click to expand...
Click to collapse
I don't think so.

Info from Dylan:
Ivan is already maintainer for both flat and edge 15.1
He just can't put his builds official until GPS is fixed
Idk when that will be though
For now people need your 14.1 builds I think too .
Thanks for the info Dylan

question: are there problems with my build ?

Working fine for me ???
Fast & reliable ?
Well done, thank you.

Exodusnick said:
question: are there problems with my build ?
Click to expand...
Click to collapse
none at all...
running 3days with microG
build is stable
everything works as listed...

only one question: how is camera's quality?

Everything seems to be good so far.
Only installed the rom last night though.
Battery life seems good.
No crashes or FC

GregoryHouse15 said:
only one question: how is camera's quality?
Click to expand...
Click to collapse
I haven't had a problem. It's fast and good quality. ?

Telegram Chat for hero2lte and herolte

test build Upload to OTA server

test build out now for S7 Edge via OTA
https://www.los-legacy.de/hero2lte after

there's just one thing missing wifi direct and display casting don't work

build 12.06.2018 via Ota
Changelog
Upload to OTA server in 50min.
Create MD5 checksum file
Transfer Rome to database
URL:https://www.los-legacy.de/hero2lte
Filename: lineage-14.1-20180612-UNOFFICIAL-hero2lte.zip
Device: hero2lte
Storage Directory:/data/lineageos_updates
patch_level 2018-06-05
OS Version: 14.1
2018-06-12 03:07:47
Romtype: unofficial
MD5SUM: 57c54870da19bfcfa99c407cadacc7f7
SIZE: 490270547

[B][ROM][11.0][OFFICIAL]Spark OS v5.0 [Polaris][/B]

Spark OS v5.0
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
View attachment 5343259
​AOSP based rom with customization focused on stability and most of all smoothness.​
What works?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Bluetooth
Fingerprint reader
NFC
Lights
Sound / vibration
What's broken?
**Include Device Specific Issues here**
None, You tell me if find!
View attachment 5343261
Reboot to recovery
Wipe data, cache, and dalvik if coming from another ROM
Flash ROM zip
(optional) Flash GApps (for vanilla builds)
(optional) Flash Magisk (root)
Format data if encrypted (if you are at MIUI, this will be mandatory)
Reboot and voila!
Upgrading to a Newer Build
Reboot to recovery
Wipe cache and dalvik
Flash ROM zip
(optional) Flash Magisk
Reboot and voila!
View attachment 5343263
ROM Download
Magisk
NikGApps
View attachment 5343267
Spark OS Source
Device Specific Trees
Kernel Source
Join our Telegram channel : https://t.me/SparkOSCommunity
Join our Telegram Support goup: http://t.me/spark_polaris​
Spark OS, ROM for polaris
Device: MI Mix 2S (polaris)
Maintainer: Julival Bittencourt (@bittencourtjulival)
Build Type: Official
ROM OS Version: 11.0
ROM Kernel: Linux 4.9.273 (Etude-Op.11-No.5)
ROM Firmware Required: Latest Firmware
Version Information
Status: Stable
Current Stable Version: 5.0
SELinux Status: Enforced
Release Date: 2021-Jul-20[/SIZE]

good

Thank you, tomorrow I will test it.

Hello- Just installed this ROM and its great so far but am having one issue, I cant send any text messages.
I can receive them and the network and sim are fine but I just cant send them.
Does anyone have any clues as to why ?
Cheers, LL-

I can't install games,it's incompatible. ..
Like SKY, NBA, SPACE MARSHAL... .
Netflix, planty more.....