[/B][/B]XT180x (Global)device or Moto g5S plus (x-mean 3/4/5/6..
★★★See the Video guide first before go ahead
Oreo flash and relock 8.1 step by step video with full commands
https://youtu.be/aX09gvYadkM Old Hindi
Or
New in English with november ROM zip. (custom to Stock 8.1)
https://youtu.be/u0iiAkfNXQw
Fix IMEI-00 without efs
https://youtu.be/TKS1JDNkIN8
Or
4k quality English
Just uploaded
https://youtu.be/7friDoYXsuM
With esf backup and restore
https://youtu.be/skdw3sGFrEw
★Custom ROM to stock without error https://youtu.be/EZSxAcJyz6g
Bootloop recovering guide in english
Step by step
https://youtu.be/wfUYrpDayd8
★Stock ROM to custom go easy
https://youtu.be/EQ796kUgJ0E
Recover your phone from bootloop or bricked device or any types of networking issues.
please download the Rom with ADM download manager mobile app.
open ADM folder and move the file to internal storage (Root folder)
Check the system update
and restart phone
again check system update online
update have come press download and install.
your system will reboot automatically
keep patience and sure you have 60% over battery.
Kindly note that
★★★★★
ROM link:-https://drive.google.com/file/d/14nWazUMHTyk-od6SF3KJOXVTOWZoC_Do/view?usp=drivesdk
or
See above for letest video guide link in english with ROM zip and new commands.
But you should go ahead before see the video guide first.
★★give a big thanks :good::good:to XDA team .
about install custom rom ,root,mobile security and more tech fun.
Facebook page
https://m.facebook.com/C-Tech-Technology-fun-237264700358197/
If you want to back from custom ROM to your official ROM and also if you want to flash with latest version of Moto Senders ROM YOU SHOULD TRY THIS ROM WITH MY COMMANDS.Please keep a back up (must efs file back up from TWRP)before going through this process.
?
ALL IN ONE JUNE PATCH ROM LINK FLASH IF YOU NEED
For Oreo Commands go to video guide .|^
June patch Old commands (More for new go through video guide abovewith relock and letest ROM zip.)
You can use the commands together paragraph wise an enter or one by one and enter.
Enjoy.
For older OR Letest dated ROM for checking OTA(you should choose letest dated ROM for best results this commands)
download[] with a good download manager, unzip all files to minimal adb root folder and boot your phone in fast boot mode and connect to pc and use my commands one by one and enter every time.
Want to buy with high(4000/-) discount from Amazon buy from Moto G5S Plus (Lunar Grey, 64GB)
https://www.amazon.in/dp/B071HWTHPH/ref=cm_sw_r_cp_apa_i_YC1cBbT6EXNRYy
★@Best back cover with 360° full camera protection only 195/-
https://youtu.be/FPbhgYQd4qY
†★★★If You wanna support me,give as you wish My★
UPI ID: [email protected] from Google Tej.
If you don't have install it for support both you and me.Link bellow
I’m inviting you to join Tez, a simple and secure payments app by Google. Here’s my code OF583 - just enter it before your first transaction. Once you’ve sent your first payment, we’ll each get ₹51! https://g.co/tez/OF583
Relock boot loader or OEM back your guarantee.
Pulakroykan said:
Recover your phone from bootloop or bricked device or any types of networking issues.
If you want to back from custom ROM to your official ROM and also if you want to flash with latest version of Moto Senders ROM YOU SHOULD TRY THIS ROM WITH MY COMMANDS.
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
*************
You can use the commands together paragraph wise an enter or one by one and enter.
Enjoy.
Download letest dated rom february( https://androidfilehost.com/?w=files&flid=214680) ,download[] with a good download manager, unzip all files to minimal adb root folder and boot your phone in fast boot mode and connect to pc and use my commands one by one and enter every time
Click to expand...
Click to collapse
*************************
Don't sign up your device just restart in fast boot mode.
And type this commands.
If you like my work please give 5 ★ right above corner
Pulakroykan said:
*************************
Don't sign up your device just restart in fast boot mode.
And type this commands.
Click to expand...
Click to collapse
After so many people use wrong commands and lost their time or device.
So give a worm thanks if you like my work.
Pulakroykan said:
After so many people use wrong commands and lost their time or device.
So give a worm thanks if you like my work.
Click to expand...
Click to collapse
My questions?
1. Does your ROM support XT1805 too?
2. By locking the bootloader, can i get official update (OTA)? or will it still block the OTA?
TY
Pulakroykan said:
Recover your phone from bootloop or bricked device or any types of networking issues.
If you want to back from custom ROM to your official ROM and also if you want to flash with latest version of Moto Senders ROM YOU SHOULD TRY THIS ROM WITH MY COMMANDS.
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
*************
You can use the commands together paragraph wise an enter or one by one and enter.
Enjoy.
Download letest dated rom february( https://androidfilehost.com/?w=files&flid=214680) ,download[] with a good download manager, unzip all files to minimal adb root folder and boot your phone in fast boot mode and connect to pc and use my commands one by one and enter every time
Click to expand...
Click to collapse
My imei = 0
Help
Yes,
tomhtg90 said:
My questions?
1. Does your ROM support XT1805 too?
2. By locking the bootloader, can i get official update (OTA)? or will it still block the OTA?
TY
Click to expand...
Click to collapse
XT1805 -code name Senders, device Moto g5S plus. so yes the ROM made for this.
Fully support OTA Update.
Try to my advice,don't panic
krupuk said:
My imei = 0
Help
Click to expand...
Click to collapse
Reboot device to fastboot and
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot.
Cause and Solve of IMEI 0
Pulakroykan said:
Reboot device to fastboot and
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot.
Click to expand...
Click to collapse
***************
1) Fully disable computer antivirus and smart screen filter
2)Use letest ROM with latest commands
3) Download the ROM with good download manager.
4)Unzip all files and folder to minimal adb root folder
5)use letest Motorola driver
6)give full processing time.
Enjoy
I just can't believe this.
There is an extremely important piece of info the fool that created this thread did not state - and is sure to cause issues for other fools that will just load anything on their device without knowing what it is they are loading.
The firmware linked is for the us variant of the g5s plus. US meaning the United States.
So if you did do as instructed, and have problems
Hahahahahahahaha - you got exactly what you deserved. Enjoy your paper weight
This thread created for global ROM,
Phazmos said:
I just can't believe this.
There is an extremely important piece of info the fool that created this thread did not state - and is sure to cause issues for other fools that will just load anything on their device without knowing what it is they are loading.
The firmware linked is for the us variant of the g5s plus. US meaning the United States.
So if you did do as instructed, and have problems
Hahahahahahahaha - you got exactly what you deserved. Enjoy your paper weight
Click to expand...
Click to collapse
***********
What do you mean boro?? The link for the ROM is fully global which supports all all Moto g5S plus,no problems.Where is written US??
whether this will work on Indian Variant XT1804 ???
can anyone confirm that IMEI won't be = 0 ?
Phazmos said:
I just can't believe this.
There is an extremely important piece of info the fool that created this thread did not state - and is sure to cause issues for other fools that will just load anything on their device without knowing what it is they are loading.
The firmware linked is for the us variant of the g5s plus. US meaning the United States.
So if you did do as instructed, and have problems
Hahahahahahahaha - you got exactly what you deserved. Enjoy your paper weight
Click to expand...
Click to collapse
It's global firmware
---------- Post added at 11:08 AM ---------- Previous post was at 11:08 AM ----------
mightyjai said:
whether this will work on Indian Variant XT1804 ???
can anyone confirm that IMEI won't be = 0 ?
Click to expand...
Click to collapse
Yes will work
I am Indian ,and I am back
mightyjai said:
whether this will work on Indian Variant XT1804 ???
can anyone confirm that IMEI won't be = 0 ?
Click to expand...
Click to collapse
Don't worry I am back two times form PE ROM. NO problem boro.
IMEI = 0
I'm getting IMEI = 0
You should backup before that,Use moto flash tool
Pulakroykan said:
***********
What do you mean boro?? The link for the ROM is fully global which supports all all Moto g5S plus,no problems.Where is written US??
Click to expand...
Click to collapse
its_zitesh_official said:
I'm getting IMEI = 0
Click to expand...
Click to collapse
Install this tool ,and install motorola driver, download letest official moto ROM,on usb debugging to Detect device with fb command . After select rom zip and enter.
http://rsdlite.en.lo4d.com
RSD Lite is a Motorola tool which can be used to install software on Motorola Android phones and tablets.
The application can be used for a number of reasons and can be a very useful tool for installing root (or rooting) a phone, but only if it's an Android phone.
The application interface of RSD Lite is pretty bare-bones and includes some technical details that would only be understood by more intermediate users.
With that said, using RSD Lite will certainly void your warranty and if you're not familiar with rooting or flashing Motorola devices, then it could brick your phone. Conversely, the tool can also be used to unbrick a device.
RSDLite is licensed as Freeware for Windows (32-bit and 64-bit) operating system / platform from mobile phone tools without restrictions. RSDLite 6.2.4 is available to all software users as a free download (Freeware).
Some people facing this problem but it caused moto failed to write IMEI in some device.So use a back up tool like √♀ back should store in your pendrive.
You might use
its_zitesh_official said:
I'm getting IMEI = 0
Click to expand...
Click to collapse
Reboot device to fastboot and
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot.
not working for me, baseband change to m8953_27.36.07.41u and imei 0. Flashing valdus, pixel, rr not helping too.
Try to my advice,don't panic
AmNeZiS said:
not working for me, baseband change to m8953_27.36.07.41u and imei 0. Flashing valdus, pixel, rr not helping too.
Click to expand...
Click to collapse
This is unfortunate ,
Try this method.
1)clear data,internal from TWRP 16 recovery
2)phone flash to official recovery.img
3)use all commends correctly don't restart
4)Use Relock command from text.
5)OEM relocked ,and fast boot reboot.
6)when you done successfully give a thanks.
Pulakroykan said:
Reboot device to fastboot and
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot.
Click to expand...
Click to collapse
Pulakroykan said:
This is unfortunate ,
Try this method.
1)clear data,internal from TWRP 16 recovery
2)phone flash to official recovery.img
3)use all commends correctly don't restart
4)Use Relock command from text.
5)OEM relocked ,and fast boot reboot.
6)when you done successfully give a thanks.
Click to expand...
Click to collapse
not working too...
Pulakroykan said:
XT1805 -code name Senders, device Moto g5S plus. so yes the ROM made for this.
Fully support OTA Update.
Click to expand...
Click to collapse
Why my device shows 4G instead of LTE symbol
Related
I downloaded Android Marshmallow after reading news about it through settings/about/system updates.
After downloading, the phone restarted but updatation was stuck after flashing TWRP screen (error screen photo attached)
My phone is
bootloader unlocked,
recovery TWRP
rooted
ROM is stock.
It seems the OTA update will be completed once I have stock recovery,
I have following queries
Is it necessary to revert to stock recovery to complete OTA update?
If yes, how to achieve it, what i learnt through search, I need to find Stock ROM zips and extract recovery (boot.img) and then flash it through adb?
where to look for thea stock rom and is there any easier method
It's risky, a lot of users here for some reasons got stuck whit locked/unlocked bootloader unable to boot and flash anything.
Here you can find all the motog stock roms http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=50
You should wait for the complete rom image for your country/model to pop there instead doing that risky thing you want do.
Thanks
Recently stock rom for xt1079 has been added to the list.
But I m trying to download from filefactory since yesterday but due to some reason, it stops in between and resume isn't supported.
Are there any other hosts
Are you sure the region of that xt1079 is right for your phonr ? check the phone box and the info inside settings to know which region/carrier you have, you must use the same identical 100% stock to avoid problems
And, do no relock bootloader !!!
yes i bought this through online retailer in India.
It is xt1079 Asia
I see in xda forum of moto g 2nd gen most of the time ppl are talking about xt1078.
What's the difference between xt1078/1079 and can't I use xt1078 ROM.
Rooting procedure meant for xt1078 worked fine for me
And Sir is relocking bootloader very risky ? suppose something goes wrong wont I be able to unlock or restore nandroid backup.
Thanks to support from Dr.nic I am finally on android 6.0
Although I have relocked my bootloader, but it is recommended to leave as it is.
If anyone stumbles here with same problem like mine i.e. unable to upgrade to android 6.0 just because of custom recovery, then pls download the firmware from filefactory.com link and flash. I'll add flashing commands as well to this post in near future.
if you have already done this rom change etc, the you must already be having fastboot, adb etc.
after connecting in fastboot mode holding VolDown and Power for few secs
run following commands
[this is for android 6.0 firmware]
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
I am not great expert, do this only if you have some idea, I may not be able to help you much if something goes wrong.
I can only say it worked for me
So the other day I tried to go back to stock from resurrection remix using a stock 5.1 file I found on this website. I used to flash and all that kind of stuff a while ago but haven't in a while and lost my touch. So basically I know I did it wrong and now there is no OS on the phone. I can access both TWRP and Fastboot mode but that's it. When I try to boot it shows the bootloader unlock screen, vibrates and then goes to a black screen that flashes the little android guy with his stomach open every so often. I tried flashing both stock and RR twice and still nothing. Any help would be greatly appreciated!
P.S. I have the Verizon XT1096 Variant.
Speedy712 said:
So the other day I tried to go back to stock from resurrection remix using a stock 5.1 file I found on this website. I used to flash and all that kind of stuff a while ago but haven't in a while and lost my touch. So basically I know I did it wrong and now there is no OS on the phone. I can access both TWRP and Fastboot mode but that's it. When I try to boot it shows the bootloader unlock screen, vibrates and then goes to a black screen that flashes the little android guy with his stomach open every so often. I tried flashing both stock and RR twice and still nothing. Any help would be greatly appreciated!
P.S. I have the Verizon XT1096 Variant.
Click to expand...
Click to collapse
So you have the Motorola USB drivers installed:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Recent versions of ADB/Fastboot.
Latest stock firmware:
firmware.center/firmware/Motorola/Moto%20X%20%282nd%20gen-2014%29/Stock/XT1096/
Probably VICTARA_VERIZON_XT1096_5.1_LPE23.32-25-5_cid2_CFC.xml.zip
Extract the firmware and put the 4 ADB/Fastboot files in the folder with the firmware files.
Boot into Bootloader Mode and connect the phone, make sure the phone says "connected..."
Shift + right-click inside that folder, Open command window here... Paste these commands, BUT CHECK THE NUMBER of sparsechunks your firmware has:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Thank you so much!! I tried this before with no avail. I think the website I used for the commands didn't have the first few that you had. But it worked, my phone booted up. Thanks again so much!
Speedy712 said:
Thank you so much!! I tried this before with no avail. I think the website I used for the commands didn't have the first few that you had. But it worked, my phone booted up. Thanks again so much!
Click to expand...
Click to collapse
You're welcome, glad it worked!
If you want to try custom roms again, I've been using TWRP 3.0.2-1 and it seems to have no issues so far (and I'm running the latest CM Nightlies).
Gus Ghanem said:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
so with this method you dont have to use the motofastboot?
fakieskr8333 said:
so with this method you dont have to use the motofastboot?
Click to expand...
Click to collapse
If you mean Motorola's mfastboot, no you don't have to, I always use the lastest fastboot to flash stock firmware, custom recovery, etc.
Of course, it's always best to have an unlocked bootloader, but then you lose warranty.
Gus Ghanem said:
If you mean Motorola's mfastboot, no you don't have to, I always use the lastest fastboot to flash stock firmware, custom recovery, etc.
Of course, it's always best to have an unlocked bootloader, but then you lose warranty.
Click to expand...
Click to collapse
I am on mac so hopefully that is not causing any issues, but I am having the same exact problem as the OP. But I was missing that first command so I am thinking that'll fix it. When in twrp whenever I tried to flash anything or wipe partitions it threw up all kinds of errors about the partitions not being mounted and stuff. Do you think missing that first command would mess up the partition table or something?
This is the errors i got when trying to wipe.
http://imgur.com/0p3lH9Q
I have been out the android scene for over a year now so I am a little rusty lol.
fakieskr8333 said:
I am on mac so hopefully that is not causing any issues, but I am having the same exact problem as the OP. But I was missing that first command so I am thinking that'll fix it. When in twrp whenever I tried to flash anything or wipe partitions it threw up all kinds of errors about the partitions not being mounted and stuff. Do you think missing that first command would mess up the partition table or something?
This is the errors i got when trying to wipe.
http://imgur.com/0p3lH9Q
I have been out the android scene for over a year now so I am a little rusty lol.
Click to expand...
Click to collapse
The first two commands are not necessary, but they wouldn't cause any problems, nor fix any:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
But before you start flashing anything on a phone, you should have the latest stock firmware on it, so that you have the latest bootloader and partition table. Some versions of TWRP (3.0) may have been corrupting partitions. You should try reflashing the latest partition table and bootloader from the latest firmware, then reflashing the latest TWRP 3.0.2-1.
I'm not familiar with macs... Is the phone encrypted?
Gus Ghanem said:
The first two commands are not necessary, but they wouldn't cause any problems, nor fix any:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
But before you start flashing anything on a phone, you should have the latest stock firmware on it, so that you have the latest bootloader and partition table. Some versions of TWRP (3.0) may have been corrupting partitions. You should try reflashing the latest partition table and bootloader from the latest firmware, then reflashing the latest TWRP 3.0.2-1.
I'm not familiar with macs... Is the phone encrypted?
Click to expand...
Click to collapse
no it was never encrypted. I have redownloaded the latest firmware on the chance that my download was corrupted or something. Should I flash the partition and boot images then restart into the bootloader before flashing the rest?
fakieskr8333 said:
no it was never encrypted. I have redownloaded the latest firmware on the chance that my download was corrupted or something. Should I flash the partition and boot images then restart into the bootloader before flashing the rest?
Click to expand...
Click to collapse
I guess it's safest to just flash the whole firmware as I have listed in the commands; these commands are contained in an XML file that comes with the firmware (flashfile.xml), the "reboot bootloader" after the partition table and bootloader flash, comes from Motorola's flashing instructions.
Gus Ghanem said:
I guess it's safest to just flash the whole firmware as I have listed in the commands; these commands are contained in an XML file that comes with the firmware (flashfile.xml), the "reboot bootloader" after the partition table and bootloader flash, comes from Motorola's flashing instructions.
Click to expand...
Click to collapse
Thanks, I am at work now but as soon as I get home I will give it a go. I have been on iOS for over a year now and my moto has been dead since about a month after moto allowed us to unlock the verizon variant. Stupid thing lol.
how do I check the amount of sparsechunks that I have. Sorry for the dumb question
---------- Post added at 02:04 PM ---------- Previous post was at 01:44 PM ----------
I just finished doing this. I am kind of a noob at this so bear with me. I tried this and I get this message that says "Boot up failed" when I try normal powerup. I'm kind of scared..
ABSOLUTE LEGEND
i was stuck since almost 36 hours, good i dint lose hope and smash the x against the wall
YOUR A LIFE SAVER Fakieskr
I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?
If your phone is defined in the device manager as COM port 9008, you can restore it according to this instruction.
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
The file 'blank-flash.bat' can be taken in the folder "mbm-ci", the cat will be in the unpacked firmware.
https://mirrors.lolinet.com/firmware/moto/chef/official/RETAIL/fastboot_chef_oem_user_9_PPT29.74-25_64be_release-keys-cid50_oem.tar.gz
After installing this file, the phone will be able to boot into fastboot.
After that, you can restore the phone by flashing the same downloaded firmware using the method described here.
https://web.telegram.org/#/[email protected]
[1:27:03 PM]
smyaknti.tar.gz
:
admin
Set your device in fastboot mode do the following and skip the
fastboot -w
step if you don't want to format everything :
fastboot oem fb_mode_set
fastboot -w
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
(If you have more or less sparsechunk files then continue or terminate beforehand accorfingly)
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot oem fb_mode_clear
fastboot reboot
Just yesterday, I so restored my phone from a brick, obtained after installing an unofficial TWRP and firmware RR.
Good luck.
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
This is the January Patch Stock ROM
NitrodiumSK said:
I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?
Click to expand...
Click to collapse
You did not "Brick" your device per se. Probably some improper file was flashed. If you have not wiped your phone, you can just simple try to fastboot flash the stock boot image. It may solve the issue. If not then do a clean flash to either the stock ROM or any custom ROM from this AFH link.
Note that the Custom ROMs are still in beta due to a VoLTE issue and thus are not released on XDA Dev DB yet. They are safe to flash though and are stable if you do not need VoLTE.
You can also ask for more help at the official telegram channel for the device.
smyaknti said:
You did not "Brick" your device per se. Probably some improper file was flashed. If you have not wiped your phone, you can just simple try to fastboot flash the stock boot image. It may solve the issue. If not then do a clean flash to either the stock ROM or any custom ROM from this AFH link.
Note that the Custom ROMs are still in beta due to a VoLTE issue and thus are not released on XDA Dev DB yet. They are safe to flash though and are stable if you do not need VoLTE.
You can also ask for more help at the official telegram channel for the device.
Click to expand...
Click to collapse
I thank you very much for your help. I was able to successfully flash the stock firmware from the link you provided. I only have a small question. The stock ROM zip, is it updated after every security patch OTA update?
NitrodiumSK said:
I thank you very much for your help. I was able to successfully flash the stock firmware from the link you provided. I only have a small question. The stock ROM zip, is it updated after every security patch OTA update?
Click to expand...
Click to collapse
Yes, the complete firmware file is different with every new build released. You can install OTA with the current fastboot flashed stock ROM but provided it has to be "FULLY STOCK". Else the update will fail.
smyaknti said:
Yes, the complete firmware file is different with every new build released. You can install OTA with the current fastboot flashed stock ROM but provided it has to be "FULLY STOCK". Else the update will fail.
Click to expand...
Click to collapse
Alright gotcha! Thanks a lot for your help
Hello dear Mates!
I purchased a cellphone yesterday Motorola Power One. its working fine, but I want to ask n know two things,
1. It has unlocked "bootloader" and on all restart it says to relock it to secure it. If I relock it, will still work or stop working?
2. It has Android 8.1.0 SKU XT1942-1 BUILD NUMBER OPT28.81-45 When I click update it shows Your Device is up-to-date
Android version 8.1.0
Current Version OPT28.81-45
Security Patch level September 1, 2018
But today I saw this update
XT1942-2_CHEF_RETAIL_9.0_PPTS29.74-29-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I want to know can I update this version and how to?
Please help me as quickly as possible
Thanks and regards
azhar
No issue downgrade
You can downgrade one power there is no issue of you downgrade it don't worry
NitrodiumSK said:
I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?
Click to expand...
Click to collapse
Any how can anybody provide stock rom oem fastboot mode with March update???
azhar63 said:
Hello dear Mates!
I purchased a cellphone yesterday Motorola Power One. its working fine, but I want to ask n know two things,
1. It has unlocked "bootloader" and on all restart it says to relock it to secure it. If I relock it, will still work or stop working?
2. It has Android 8.1.0 SKU XT1942-1 BUILD NUMBER OPT28.81-45 When I click update it shows Your Device is up-to-date
Android version 8.1.0
Current Version OPT28.81-45
Security Patch level September 1, 2018
But today I saw this update
XT1942-2_CHEF_RETAIL_9.0_PPTS29.74-29-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I want to know can I update this version and how to?
Please help me as quickly as possible
Thanks and regards
azhar
Click to expand...
Click to collapse
Yeah bro flash this room via fastboot commands
motorola one power
my moto one power starts freezing and when i restart its touch stop working....i flashed stock rom using twrp but still same problem and also try to flash rom using fastboot but still its system ui not responding and phone freezes and touch not working after reboot...please help please!!!:crying:
aum25 said:
Yeah bro flash this room via fastboot commands
Click to expand...
Click to collapse
Did you flash that rom in 1942- 1 ??? I have the same model num and running oreo... Want to update pie??? Were you successful in doing that ? Because that firmware file was for 1942-2 ? Plz share experience.
rudranshrajput said:
my moto one power starts freezing and when i restart its touch stop working....i flashed stock rom using twrp but still same problem and also try to flash rom using fastboot but still its system ui not responding and phone freezes and touch not working after reboot...please help please!!!:crying:
Click to expand...
Click to collapse
Did you install any third party app or it happens by itself? I had the same problem but i was messing around with the moto app launcher. Anyhow, try flashing this stock rom with latest june security patch. Don't use TWRP, it is a full rom. Use Fastboot mode. Also backup your device, if you want your files back. This will do a clean install of the rom.
Here is the link: https://drive.google.com/file/d/1lLmDvX4R4o2Jqrhp1RQflap27jxe4hXS/view
Steps:
1) Boot your device into fastboot mode
2) Open flashall.bat and wait for flashing
3) Reboot
colorist said:
If your phone is defined in the device manager as COM port 9008, you can restore it according to this instruction.
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
The file 'blank-flash.bat' can be taken in the folder "mbm-ci", the cat will be in the unpacked firmware.
https://mirrors.lolinet.com/firmware/moto/chef/official/RETAIL/fastboot_chef_oem_user_9_PPT29.74-25_64be_release-keys-cid50_oem.tar.gz
After installing this file, the phone will be able to boot into fastboot.
After that, you can restore the phone by flashing the same downloaded firmware using the method described here.
https://web.telegram.org/#/[email protected]
[1:27:03 PM]
smyaknti.tar.gz
:
admin
Set your device in fastboot mode do the following and skip the
fastboot -w
step if you don't want to format everything :
fastboot oem fb_mode_set
fastboot -w
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
(If you have more or less sparsechunk files then continue or terminate beforehand accorfingly)
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot oem fb_mode_clear
fastboot reboot
Just yesterday, I so restored my phone from a brick, obtained after installing an unofficial TWRP and firmware RR.
Good luck.
Click to expand...
Click to collapse
thanks by you my device just boot up in fastboot mod
thank you very much
best regard
Need help with phone bricked.
I was installing the Arrows OS in Motorola one power and after rebooting, the set is in the bricked mode now it's not responding to anything. Can anyone please guide how can I fix it?
I got similar problem.when I'm flashing arrows or others custom ROMs(1custom ROM,2twrp installer)and restart my phone no restarting only bricked.help only blankflash
Phone bricked after installing arrow is on p30 note xt1942-1
I tried the blankflash method but not working, I'm getting I/O error
Any ideas?
Hello, I tried to install a rom on my moto z3 play and now it does not start. With "blankflash" I managed to make it turn on in mode fastboot but i try to install the original rom but it says "Oem_locked". Then install the moto smart asistant tool but it didn't work either, inside "moto asistant" I get "Error combining the connected device, please connect it and try again", when I connect it, an unsupported device appears. It is rare because the previous times I use the program, I download the official rom of the device and install it, but now it does not work. In "connected devices" it does not appear as "Qualcomm_Qdloader 9008" but appears as "Fastboot beckham S".
I'm really desperate I don't know what to do. If anyone knows how I can fix it please I need your help.
Is there a way to enable usb debugging from the "fastboot"?
Mica_Diazz531 said:
Hello, I tried to install a rom on my moto z3 play and now it does not start. With "blankflash" I managed to make it turn on in mode fastboot but i try to install the original rom but it says "Oem_locked". Then install the moto smart asistant tool but it didn't work either, inside "moto asistant" I get "Error combining the connected device, please connect it and try again", when I connect it, an unsupported device appears. It is rare because the previous times I use the program, I download the official rom of the device and install it, but now it does not work. In "connected devices" it does not appear as "Qualcomm_Qdloader 9008" but appears as "Fastboot beckham S".
I'm really desperate I don't know what to do. If anyone knows how I can fix it please I need your help.
Is there a way to enable usb debugging from the "fastboot"?
Click to expand...
Click to collapse
I believe your only option is RSD Lite if you have a windows 7 pc
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
sd_shadow said:
I believe your only option is RSD Lite if you have a windows 7 pc
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Click to expand...
Click to collapse
Thank you !! I will try to do that, first I will see if I can get a pc with windows 7. that would be the only solution?
Mica_Diazz531 said:
Hello, I tried to install a rom on my moto z3 play and now it does not start. With "blankflash" I managed to make it turn on in mode fastboot but i try to install the original rom but it says "Oem_locked". Then install the moto smart asistant tool but it didn't work either, inside "moto asistant" I get "Error combining the connected device, please connect it and try again", when I connect it, an unsupported device appears. It is rare because the previous times I use the program, I download the official rom of the device and install it, but now it does not work. In "connected devices" it does not appear as "Qualcomm_Qdloader 9008" but appears as "Fastboot beckham S".
I'm really desperate I don't know what to do. If anyone knows how I can fix it please I need your help.
Is there a way to enable usb debugging from the "fastboot"?
Click to expand...
Click to collapse
Try this:
Connect your device to the PC in Fastboot mode and in the command prompt type:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
Restart the device in Fastboot mode and follow the procedure for flashing the rom normally.
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot bluetooth flash BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase cache
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
If you have problems with carrier signal and / or wifi, see this link: https://forum.xda-developers.com/showpost.php?p=83152527&postcount=4
fastbook flash instructions
Loko_vr said:
Restart the device in Fastboot mode and follow the procedure for flashing the rom normally.
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot bluetooth flash BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase cache
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Hi. I want to flash a rom using fastboot into my mz3 Play. I can't find a tutorial on it. After I download the ROM:
1. I unzip it to the desktop?
2. connect the phone to usb in fastboot mode?
3. Run the commands in fastboot?
or do I have to unzip the ROM into the ADB / fastboot folder?
kc12 said:
Restart the device in Fastboot mode and follow the procedure for flashing the rom normally.
Hi. I want to flash a rom using fastboot into my mz3 Play. I can't find a tutorial on it. After I download the ROM:
1. I unzip it to the desktop?
2. connect the phone to usb in fastboot mode?
3. Run the commands in fastboot?
or do I have to unzip the ROM into the ADB / fastboot folder?
Click to expand...
Click to collapse
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my perry_f using XDA Labs
kc12 said:
Hi. I want to flash a rom using fastboot into my mz3 Play. I can't find a tutorial on it. After I download the ROM:
1. I unzip it to the desktop?
2. connect the phone to usb in fastboot mode?
3. Run the commands in fastboot?
or do I have to unzip the ROM into the ADB / fastboot folder?
Click to expand...
Click to collapse
Using fastboot, unzip the firmware files in the same folder as adb / fastboot and then follow the commands listed above.
Note:
The bootloader must be unlocked.
The adb drivers must be installed.
The device must be started in fastboot mode.
Loko_vr said:
Using fastboot, unzip the firmware files in the same folder as adb / fastboot and then follow the commands listed above.
Note:
The bootloader must be unlocked.
The adb drivers must be installed.
The device must be started in fastboot mode.
Click to expand...
Click to collapse
Thank you for responding! Presently my bootloader is unlockable. I have already done as you described and the rom flashed without issues. Thanks again.
---------- Post added at 11:07 PM ---------- Previous post was at 10:56 PM ----------
sd_shadow said:
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my perry_f using XDA Labs
Click to expand...
Click to collapse
Thank you for the link. The tutorial is great for someone who is knowledgeable in fastboot. But my experience with fastboot is limited with booting and flashing twrp. And maybe a few simple other commands. The tutorial didn't have any information regarding what I was supposed to do with the ROM zip after I downloaded it. However, your tutorial had several links and following one link to another and to another.. ... I was able to determine that what you do with the zip file kind of depends on how you have set up your adb/ fastboot. And because of another article you wrote I was able to determine unzipping the rom in my abd/fastboot folder was what I needed to do. So, thank you for your knowledge, which is light years ahead of mine.
---------- Post added at 11:09 PM ---------- Previous post was at 11:07 PM ----------
sd_shadow said:
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my perry_f using XDA Labs
Click to expand...
Click to collapse
Thank you for the link. The tutorial is great for someone who is knowledgeable in fastboot. But my experience with fastboot is limited with booting and flashing twrp. And maybe a few simple other commands. The tutorial didn't have any information regarding what I was supposed to do with the ROM zip after I downloaded it. However, your tutorial had several links and following one link to another and to another.. ... I was able to determine that what you do with the zip file kind of depends on how you have set up your adb/ fastboot. And because of another article you wrote I was able to determine unzipping the rom in my abd/fastboot folder was what I needed to do. So, thank you for your knowledge, which is light years ahead of mine.
kc12 said:
Thank you for responding! Presently my bootloader is unlockable. I have already done as you described and the rom flashed without issues. Thanks again.
---------- Post added at 11:07 PM ---------- Previous post was at 10:56 PM ----------
Thank you for the link. The tutorial is great for someone who is knowledgeable in fastboot. But my experience with fastboot is limited with booting and flashing twrp. And maybe a few simple other commands. The tutorial didn't have any information regarding what I was supposed to do with the ROM zip after I downloaded it. However, your tutorial had several links and following one link to another and to another.. ... I was able to determine that what you do with the zip file kind of depends on how you have set up your adb/ fastboot. And because of another article you wrote I was able to determine unzipping the rom in my abd/fastboot folder was what I needed to do. So, thank you for your knowledge, which is light years ahead of mine.
---------- Post added at 11:09 PM ---------- Previous post was at 11:07 PM ----------
Thank you for the link. The tutorial is great for someone who is knowledgeable in fastboot. But my experience with fastboot is limited with booting and flashing twrp. And maybe a few simple other commands. The tutorial didn't have any information regarding what I was supposed to do with the ROM zip after I downloaded it. However, your tutorial had several links and following one link to another and to another.. ... I was able to determine that what you do with the zip file kind of depends on how you have set up your adb/ fastboot. And because of another article you wrote I was able to determine unzipping the rom in my abd/fastboot folder was what I needed to do. So, thank you for your knowledge, which is light years ahead of mine.
Click to expand...
Click to collapse
I recommend LMSA's Flash Rescue it's easier
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
sd_shadow said:
I recommend LMSA's Flash Rescue it's easier
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Click to expand...
Click to collapse
My phone is a sprint variant. I wanted to flash the brazil variant and the US canada variant, in hopes of one would solve my issue and I could get my bootloader unlocked. I couldn't get them to flash with the rescue tool. I followed someone's instructions where they were able to trick the tool by replacing the files in the lmsa's rom folder. Unfortunately I couldn't get either one to flash in the lmsa tool past 64%. They fail. So I had to fastboot them. Unfortunately I still can't get fastboot to retrieve my unlock data.
I unlocked the bootloader a few months ago, flashed TWRP and installed Magisk and rooted. Discovered I can't use my work profile while rooted and Google Pay won't work with an unlocked bootloader. So I unrooted and removed Magisk, and locked the bootloader again. Then I got this notification for an OTA update to Android 11, but it fails at step 3 of 6, I assume it's because of TWRP.
I asked Motorola to send me the image(s) necessary for the recovery_a and recovery_b partitions but they refuse to help, despite the fact that as the owner of the device, I also own a license to use every piece of software that comes with it. Can anyone here provide me with the stock recovery image(s)? My phone gives me a notification every 10-20 minutes that this Android 11 update is available and it's incredibly frustrating that I can't get rid of it and Motorola won't give me what I need to fix it.
Thx in advance to anyone willing to help.
Look at https://mirrors.lolinet.com/firmware/moto/kiev/official/
Use the file that matches what you have on your phone.
Thank you for the link. However, my build number [QZKS30.Q4-40-95-9] isn't listed. Should I try QZKS30.Q4-40-95-6?
Kor1134 said:
Thank you for the link. However, my build number [QZKS30.Q4-40-95-9] isn't listed. Should I try QZKS30.Q4-40-95-6?
Click to expand...
Click to collapse
build number is not model number. As long as your device is "kiev" you can download any one of the firmware packages.
Or just download the 11 to start with
Fandroid Tech said:
build number is not model number. As long as your device is "kiev" you can download any one of the firmware packages.
Click to expand...
Click to collapse
I understand, thank you for clarifying, but all I need is the recovery image. I just didn't want to flash a recovery image with a different build number in the unlikely event there's a difference between my build and whichever build I download. I'd prefer not to flash the whole system if I can avoid it, but whatever, I guess I'll just throw Android 11 in it.
Thx.
So, can someone let me know exactly how to flash the oem images to this phone? I booted into the bootloader and ran the following commands:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery_a recovery.img
fastboot flash recovery_b recovery.img
fastboot flash dtbo dtbo.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot erase carrier
fastboot erase userdata
fastboot erase metadata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot reboot
Now it just boot loops when powering on and entering charging mode.
EDIT: nevermind, I missed super.img_sparsechunk.9, all good now.
XT2113-2
Kor1134 said:
I unlocked the bootloader a few months ago, flashed TWRP and installed Magisk and rooted. Discovered I can't use my work profile while rooted and Google Pay won't work with an unlocked bootloader. So I unrooted and removed Magisk, and locked the bootloader again. Then I got this notification for an OTA update to Android 11, but it fails at step 3 of 6, I assume it's because of TWRP.
I asked Motorola to send me the image(s) necessary for the recovery_a and recovery_b partitions but they refuse to help, despite the fact that as the owner of the device, I also own a license to use every piece of software that comes with it. Can anyone here provide me with the stock recovery image(s)? My phone gives me a notification every 10-20 minutes that this Android 11 update is available and it's incredibly frustrating that I can't get rid of it and Motorola won't give me what I need to fix it.
Thx in advance to anyone willing to help
Click to expand...
Click to collapse
1st. rsdlite, 2nd. fastbootd, 3rd. make back-up(s), 4th. checkout L-os, its a PLETHORA of relevant info ex. dual partition issues and resolutions. AND i do believe
i know this is a bit l8, HOWEVER, in the event it is not too l8 OR you find yourself requiring assistance hmu. ive spent last couple months DARING my kiev to transform into this elusive paperweight...to no avail. along the way ive learn_ed a couple-o-tings, this and the photon q are amazing marvels of techno{imo}
ciao
if anyone has kiev ?s, i MIGHT be albe to help. i am no self professed aficionado or anything but ive been learning about moto's for a few years.
ciao