Related
I'm trying to flash my sprint marquee to virgin and I needed that file anyone got it? Thanks in advance if I find it before hand I'll post a link and change the thread title
abourdeau said:
You need that DLL for what program?
Click to expand...
Click to collapse
Lgnpst I actually got it to read though with the vs660.dll though. The dll that lg updater spits out is broken or can't be read by reggie.exe.
In case your wondering lg phones don't connect correctly unless you run the lgnpst program first. Then cdma workshop, dfs and other programs will work correctly. Honestly after going through the motions for awhile I think my best bet would be to erase the phones imei using smart flash then rewriting it using qxdm
Q&A for [TOT][RESTORE] LG LS991 ZV5 TOT
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOT][RESTORE] LG LS991 ZV5 TOT. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Stuck on Setup after TOT Restore for the Sprint LG G4
I ran into a problem after I followed the steps to restore my LG G4. Now I cant get through the setup process without it returning me to "Set Internet Connection screen". I have a video of this happening but I'm unable to post the link because I'm a new user.
It still returned me to the same screen after I connected to my home wifi and entered my google account info that I last used on there. I also have a video of this.
Stuck_On_Setup said:
I ran into a problem after I followed the steps to restore my LG G4. Now I cant get through the setup process without it returning me to "Set Internet Connection screen". I have a video of this happening but I'm unable to post the link because I'm a new user.
It still returned me to the same screen after I connected to my home wifi and entered my google account info that I last used on there. I also have a video of this.
Click to expand...
Click to collapse
Possibly try restoring again?
Any way of using this TOT method after flashing the US991 firmware? I keep getting "DoDownload Error!!!"
ironbesterer said:
Possibly try restoring again?
Click to expand...
Click to collapse
Ive tried restoring again and got the same result. Also, when I first ran the flash tool I got a "DBMS" window with four options. After doing some research I found out that this shouldn't be happening. So I made sure that the new MegaLock.ddll was being replaced but i still got the same window.
Stuck_On_Setup said:
Ive tried restoring again and got the same result. Also, when I first ran the flash tool I got a "DBMS" window with four options. After doing some research I found out that this shouldn't be happening. So I made sure that the new MegaLock.ddll was being replaced but i still got the same window.
Click to expand...
Click to collapse
Happening to me as well, tried both Windows 10 64 bit and Windows 8 64 bit.
ijball said:
Happening to me as well, tried both Windows 10 64 bit and Windows 8 64 bit.
Click to expand...
Click to collapse
Are you also stuck trying to get past the "Set Internet Connection"
Thanks A lot GOD BLESS YOU
I have this same issue 2 g4 on bootloop one i was flashed to verizon kdz I will try to flash sprint rooted system img and then flash tot file and let you know
Any way very thanx to you
You are the best
one more Thing Please
any one have the unlocked sprint g4 so please root it and via root explorer please backup the node.db and node_journal.db which was placed on root/system/carrier/app please upload those to .db extensions files and try to unlock ls991 phones
PLEASE UPLOAD THOSE FILE FROM UNLOCKED SPRINT G4
I think this was the solution for unlocking
Thanx in advance
---------- Post added at 06:33 PM ---------- Previous post was at 06:28 PM ----------
Very Very thanx to you
you are the best
one more Thing Please
any one have the unlocked sprint g4 so please root it and via root explorer please backup the node.db and node_journal.db which was placed on root/system/carrier/app please those to .db extensions files and upload it to try to unlock ls991 phones
PLEASE UPLOAD THOSE FILE FROM UNLOCKED SPRINT G4
I think this was the solution for unlocking
By pass DLL
I had the same problem and can fix it, you have to download this file and put it in the DLL option in LG Flash Tool, with TOT Sprint.
http://www.mediafire.com/download/jdlyk28pygp1idj/dll+mod.dll
Stuck_On_Setup said:
Are you also stuck trying to get past the "Set Internet Connection"
Click to expand...
Click to collapse
I'm not encountering that error but I keep getting "DoDownload Error!!!". When given the choice for DBMS, I tried both Korea one, and the Global one. I've read that I shouldn't be getting that prompt in the first place.
LG G4 LS991 Factory reset status 2.
I restore my ls991. but at the end the phone stuck in a blue screen with this message " Factory Reset Status 2". please could you help?
try board DL mode, instead upgrade dL
homero_2000 said:
I restore my ls991. but at the end the phone stuck in a blue screen with this message " Factory Reset Status 2". please could you help?
Click to expand...
Click to collapse
You need to download a hex editor and change the header of the tot file from the LS991 to the US991 version. When flashing use the board DL mode, not upgrade mode. Hope this helps.
Search for 991 and look for VLGLS991 and LS991ZV5_05, change it to your US991 file name. In the picture i modified it for the verizon rom I flashed. Yours will be different since you flashed the US991 version. Good Luck
ijball said:
Any way of using this TOT method after flashing the US991 firmware? I keep getting "DoDownload Error!!!"
Click to expand...
Click to collapse
cudos01 said:
You need to download a hex editor and change the header of the tot file from the LS991 to the US991 version. When flashing use the board DL mode, not upgrade mode. Hope this helps.
Search for 991 and look for VLGLS991 and LS991ZV5_05, change it to your US991 file name. In the picture i modified it for the verizon rom I flashed. Yours will be different since you flashed the US991 version. Good Luck
Click to expand...
Click to collapse
Thanks, I tried this. It flashed but when the phone automatically rebooted, I got the download error on the flash tool. Is that normal? The phone booted properly but I haven't played around it yet. Will let you guys know after I played around with it.
If it flash pass 80% and phone reboot then you are good. Glad it work for you
ijball said:
Thanks, I tried this. It flashed but when the phone automatically rebooted, I got the download error on the flash tool. Is that normal? The phone booted properly but I haven't played around it yet. Will let you guys know after I played around with it.
Click to expand...
Click to collapse
cudos01 said:
If it flash pass 80% and phone reboot then you are good. Glad it work for you
Click to expand...
Click to collapse
Thanks, btw for those that tried this method. Is /carriers/app still in your phone? I can only find an empty /carrier directory.
EDIT: NVM, I tried inserting my non US GSM SIM and it's already being recognized. Will try if I'll have data.
EDIT2: Data is now working. I'm outside US.
Select Board DL
homero_2000 said:
I restore my ls991. but at the end the phone stuck in a blue screen with this message " Factory Reset Status 2". please could you help?
Click to expand...
Click to collapse
For this problem you have to select the Board DL in LG Flash Tool
flash tot problem ls991
AFTER USE THIS METHOD MI LG has remained on a blue screen says factory reset status and puts a large 2
I CAN DO THIS WELL BEFORE THIS
Try board DL mode, instead of Upgrade Mode. Good luck
bryan4mer said:
AFTER USE THIS METHOD MI LG has remained on a blue screen says factory reset status and puts a large 2
I CAN DO THIS WELL BEFORE THIS
Click to expand...
Click to collapse
cudos01 said:
You need to download a hex editor and change the header of the tot file from the LS991 to the US991 version. When flashing use the board DL mode, not upgrade mode. Hope this helps.
Search for 991 and look for VLGLS991 and LS991ZV5_05, change it to your US991 file name. In the picture i modified it for the verizon rom I flashed. Yours will be different since you flashed the US991 version. Good Luck
Click to expand...
Click to collapse
its working , thanks a lot....
Ok guys i have heard lots of Qualcomm 9008 device bricks. I have an idea to fix it. Dont know if it is possible.
First of all refer to this thread : http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
There is a possiblity to write all parts but board diag doesnt work with G4.
I also have Nubia Emmc Write tool. But when i tried to flash rom from exrracted it needs xml file. I think this XML files refers to rom parts on chipset addresses.
So if someone can post or send me kind a file like this or a board diag which is supported with G4 there will be huge possiblity to test.
Please let us know what you think.
gays said z3x easy jtag can repair it!
T-95 said:
gays said z3x easy jtag can repair it!
Click to expand...
Click to collapse
Have you found any working method for g4?
benzersizadam said:
Ok guys i have heard lots of Qualcomm 9008 device bricks. I have an idea to fix it. Dont know if it is possible.
First of all refer to this thread : http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
There is a possiblity to write all parts but board diag doesnt work with G4.
I also have Nubia Emmc Write tool. But when i tried to flash rom from exrracted it needs xml file. I think this XML files refers to rom parts on chipset addresses.
So if someone can post or send me kind a file like this or a board diag which is supported with G4 there will be huge possiblity to test.
Please let us know what you think.
Click to expand...
Click to collapse
I know both g 2 and g3 had hardbrick fixes by grounding a pin out now i do know thT when u go through eemc write board diag u need the tot or kdz of the firmware ure phone was bricked on so if u bricked zv6 u have to get ure boot table from a zv6 tot
for repair need dump from same phone, no i try to find lg g4 h810 dump, only after that can repair it via jtag
T-95 said:
for repair need dump from same phone, no i try to find lg g4 h810 dump, only after that can repair it via jtag
Click to expand...
Click to collapse
I think to find those files to repair via emmc pinouts you need octoplus jtag pro this box give new update for lg g4s dead boot repair
but we want this repair via usb cable as i heard that someone repair it via usb cable in my country but don't really know how
So this was our hope that it was repair by usb cable
I think we want to make some hard work for finding those files to repair this
With my opinion
We need following files to repair this phone
1st msm8992 emmc ddr.mbn
2nd msm8992loader.hex
3rd our phone's rawprogram.xml and some sbl1 files
1st file was shared by someone in xda forum this file is from another phone but same emmc
Br
Shahzaib Jahangir
I think only unbrick z3 easy ztag for now
Shabby The Dev said:
I think to find those files to repair via emmc pinouts you need octoplus jtag pro this box give new update for lg g4s dead boot repair
but we want this repair via usb cable as i heard that someone repair it via usb cable in my country but don't really know how
So this was our hope that it was repair by usb cable
I think we want to make some hard work for finding those files to repair this
With my opinion
We need following files to repair this phone
1st msm8992 emmc ddr.mbn
2nd msm8992loader.hex
3rd our phone's rawprogram.xml and some sbl1 files
1st file was shared by someone in xda forum this file is from another phone but same emmc
Br
Shahzaib Jahangir
Click to expand...
Click to collapse
Cant agree more. If we dump a G4 we can make same way. But we need to be sure that if it works as the same logic with g2 or g3
benzersizadam said:
Cant agree more. If we dump a G4 we can make same way. But we need to be sure that if it works as the same logic with g2 or g3
Click to expand...
Click to collapse
What you exactly mean dump as I see i have dump for ls996 zv6 and zv7 emmc img file which was taken by working phone but my phone is ls991 if you want so i will upload
Sorry for bad english
Br
Shahzaib Jahangir
Shabby The Dev said:
What you exactly mean dump as I see i have dump for ls996 zv6 and zv7 emmc img file which was taken by working phone but my phone is ls991 if you want so i will upload
Sorry for bad english
Br
Shahzaib Jahangir
Click to expand...
Click to collapse
we need a dump from EXACTLY same model.
benzersizadam said:
we need a dump from EXACTLY same model.
Click to expand...
Click to collapse
Ok when i get this phone so i make the dump from it and upload it
Can you please guide me what is the dd commands for backup whole emmc
And one more thing i have octoplus box in this software there is dump nand option but when i start dump nand on this software it was backup the phone on download mode but by backing up it take so long time and the backup file was .bin format if you want this dump backup .bin file or dump.img file
Br
Shahzaib Jahangir
Anyone have luck resurrecting an LG H810 from the Qualcomm 9008 mode yet? Or get the files for OCTOPLUS?
technoid1964 said:
Anyone have luck resurrecting an LG H810 from the Qualcomm 9008 mode yet? Or get the files for OCTOPLUS?
Click to expand...
Click to collapse
I think the only solution is jtag
some device supported it
Hi My phone got bricked LG G4 LS991.
I am about to buy octopus box LG with no-JTAG support will this help me to sort my issue or I need a JTAG one?
Here is the ZV6 LS991 Dump file.
http://www.gsm-file.com/index.php?route=download/confirm&dl_file_id=4035
I have a US991. I am able to create the file system on SD card and the phone while turn on and say Secure Boot Error 1006 and OFFICIAL underneath. I messed around for a while and made it change to LGE AndroidNET USB which does not show boot looping screen, but I can't replicate that again yet on my SD card.. I can do this with the LS991 dump and the files from a KDZ as well. I'm not sure what else to do? The trick here is to create the phones boot loader/file system on an SD card then insert it into the phone so you can get into download mode and flash.
Noksucow1 said:
I have a US991. I am able to create the file system on SD card and the phone while turn on and say Secure Boot Error 1006 and OFFICIAL underneath. I messed around for a while and made it change to LGE AndroidNET USB which does not show boot looping screen, but I can't replicate that again yet on my SD card.. I can do this with the LS991 dump and the files from a KDZ as well. I'm not sure what else to do? The trick here is to create the phones boot loader/file system on an SD card then insert it into the phone so you can get into download mode and flash.
Click to expand...
Click to collapse
how can i write booting files on sd card ?
Noksucow1 said:
I have a US991. I am able to create the file system on SD card and the phone while turn on and say Secure Boot Error 1006 and OFFICIAL underneath. I messed around for a while and made it change to LGE AndroidNET USB which does not show boot looping screen, but I can't replicate that again yet on my SD card.. I can do this with the LS991 dump and the files from a KDZ as well. I'm not sure what else to do? The trick here is to create the phones boot loader/file system on an SD card then insert it into the phone so you can get into download mode and flash.
Click to expand...
Click to collapse
HI, they are working on this I think......in this thread......with some success.
http://forum.xda-developers.com/tmobile-g4/help/unbrick-lg-g4-h811-9008-qualcomm-t3456421
It seems like you have an idea of what is going on.. I guess the idea is to have the proper DUMPS from all the variants.
What do you think about their progress? I think about their progress? Is it related to your suggestions and problems with your LS991? I think they are suggesting to make available all variant dumps.
Reply
benzersizadam said:
Ok guys i have heard lots of Qualcomm 9008 device bricks. I have an idea to fix it. Dont know if it is possible.
First of all refer to this thread : http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
There is a possiblity to write all parts but board diag doesnt work with G4.
I also have Nubia Emmc Write tool. But when i tried to flash rom from exrracted it needs xml file. I think this XML files refers to rom parts on chipset addresses.
So if someone can post or send me kind a file like this or a board diag which is supported with G4 there will be huge possiblity to test.
Please let us know what you think.
Click to expand...
Click to collapse
got a single image file for the lg g4 h811 with the xml files can you send me a copy of the nubia eemc dump tools?????????????? [email protected]
hello dear is these file are unbrick g4 .....can buy it or its fake
---------- Post added at 10:05 PM ---------- Previous post was at 10:04 PM ----------
http://www.easy-firmware.com/index.php?a=browse&b=category&id=17384
I just tried a few trick that all member in here post, and rewrite it in easy step.
For someone who own LG G4 LS991 SPRINT network which is only CDMA and want to make it work on global network whether it is GSM/LTE/CDMA, ... all work.
- No Need to ROOT your phone
1- Connect your phone to PC and transfer the International ROM found in link below, direct under your phone INTERNAL STORAGE
*** ZV6 ROM
*** ZV9 ROM
2- Shut Down you phone
3- Start download mode (Hold Volum Up button and Plug USB cable)
4- Run LGUP re-flashing your current ROM Version (same rom of your current running one) ZV6, ZV9... whatever
5- Look at the progress % bar, when it reach 9%, unplug the usb cable and close the LGUP software
6- Your phone will stay in DOWNLOAD Mode with GREEN TEXT show COM##
7- Run sendcommand tool with specific COM## shown on your mobile screen
8- Run dd command to replace the ROM image you saved inside your INTERNAL STORAGE into your mobile system as instructed in step 1- LINK
9- Wait under the replacing done and you will see the hash tag # appear on the new line
10- type LEAVE to exit your download mode and restart the phone
Cheer, that's done you phone is loading with ROOTED International Network enabled.
If you have your phone done, please simply click THANK....
Also thank to all XDA Developer member for all the reference included in this thread.
Will updating PRL and profile overwrite the Global SIM?
someone tried it as yet? seems a bit risky removing the phone while flashing a rom dont you think???
Also need some elaboration for these 2 steps please:
7- Run sendcommand tool with specific COM## shown on your mobile screen
8- Run dd command to replace the ROM image you saved inside your INTERNAL STORAGE into your mobile system as instructed in step 1- LINK
OP please ADD a disclaimer, THIS METHOD IS TOO RISKY. Just a 1 second delay can brick your device with no download mode. few members have bricked their device by flashing phones with this method, @Agimax and @tabp0le .
Try the long route posted by other member, its safer then this one.
With those two link ROM, they are GSM enabled already.... it's not too risky. It's definitely work.
I already did on a few phone and all success, never fail.
please give zvB rom
who006 said:
please give zvB rom
Click to expand...
Click to collapse
https://qui.click/mmzvb101-gsm
Am I right that for ZVB I should send this command (only change img name)?
dd if=/data/media/0/MellowMallow_LS991ZVB_v1.01_Global.img bs=8192 seek=65536 count=557312 of=/dev/block/mmcblk0
alex1080 said:
Am I right that for ZVB I should send this command (only change img name)?
dd if=/data/media/0/MellowMallow_LS991ZVB_v1.01_Global.img bs=8192 seek=65536 count=557312 of=/dev/block/mmcblk0
Click to expand...
Click to collapse
Yes
is there any video that using sendcommand on lg G4?
When i put LEAVE my phone dont reboot, sorry for my bad english
can someone please help me, I've been trying to get my phone to global for ages but im struggling with this. i dont know where to go, what links are what and which ROM i should run or insert. If theres the video or someone PM me that would be great C:
will this method work for an LS991 on ZVC marshmallow stock ?
anybody tried it on zvc please?
has anybody tried it on zvc yet?
Thanks.
I've successfuly done this process in ZVC but i'm not able to select gsm mode.
Only options are CDMA and LTE.
I tried on ZVC but the phone only restarts
LG G4 LS991.
LG G3 D850 ROM Fulmics 6.6
Recovery TWRP v2.8.7.0 bumped
Does the send command tool only run when the COM port is enabled?
because you try to run it to see if it works, before you activate the COM port and it does not run
Jpitel said:
Does the send command tool only run when the COM port is enabled?
because you try to run it to see if it works, before you activate the COM port and it does not run
Click to expand...
Click to collapse
The send command was closed a while back on zvb you have to force open it throught a dangerous method.
TheMadScientist said:
The send command was closed a while back on zvb you have to force open it throught a dangerous method.
Click to expand...
Click to collapse
Or just use FWUL with lglaf which is not dangerous..
Sent from my LG-H815 using XDA Labs
I want to Upgrade My T mobile G4 h81110o LP to MM But I dont know Which Rom I should Flash With LGUP
Iam Searching More Information About h81110o But No One seems Have the same Software version With me
And 1 more question My Phone Is already sim unlocked If i flash MM KDZ With LGUP Is it will sim pocket my phone ?
Pls Help me Here Guys
QuantumDroid said:
I want to Upgrade My T mobile G4 h81110o LP to MM But I dont know Which Rom I should Flash With LGUP
Iam Searching More Information About h81110o But No One seems Have the same Software version With me
And 1 more question My Phone Is already sim unlocked If i flash MM KDZ With LGUP Is it will sim pocket my phone ?
Pls Help me Here Guys
Click to expand...
Click to collapse
assuming you have a ral h811. as i dont know your version...
theres is antirollback in our phone. if you want to stay in a point where you can switch back and forth from LP to MM flash h81120i thats first MM and thats antirollback V2 if you want to go back to LP flash h811 10n. if you dont care about LP anymore flash latest h81120v.
search it should be around here in this section of r mobile, and you are sim carrier unlock.. flashing any wont lock it back. i have same unlocked carrier. when flashing select refurbished in LG UP
forgot to mention once you flash h81120v or 20o-20p-20q-20r-20s you cant go back to LP.
raptorddd said:
assuming you have a ral h811. as i dont know your version...
theres is antirollback in our phone. if you want to stay in a point where you can switch back and forth from LP to MM flash h81120i thats first MM and thats antirollback V2 if you want to go back to LP flash h811 10n. if you dont care about LP anymore flash latest h81120v.
search it should be around here in this section of r mobile, and you are sim carrier unlock.. flashing any wont lock it back. i have same unlocked carrier. when flashing select refurbished in LG UP
forgot to mention once you flash h81120v or 20o-20p-20q-20r-20s you cant go back to LP.
Click to expand...
Click to collapse
Is it Will not hardbrick or softbrick My h811 10o if i flash 20v I see Another Thread it says if flash the different antirollback Example : i have A V2 And i flash V3 antirollback
Can you Give me A link For the latest and right kdz File for my 10o
I am scared That I Select the wrong Kdz
Should i tick the bin file in LGUP ?
Can you Show me how to Install With LGUP
Thanks :angel:
By the way.. This is my software information
Android = 5.1
Kernel. =3.10.49
Build number = LMY47D-XT
Software version =h81110o
Security software version =MDF v1.1 release 5
QuantumDroid said:
Is it Will not hardbrick or softbrick My h811 10o if i flash 20v I see Another Thread it says if flash the different antirollback Example : i have A V2 And i flash V3 antirollback
Can you Give me A link For the latest and right kdz File for my 10o
I am scared That I Select the wrong Kdz
Should i tick the bin file in LGUP ?
Can you Show me how to Install With LGUP
Thanks :angel:
By the way.. This is my software information
Android = 5.1
Kernel. =3.10.49
Build number = LMY47D-XT
Software version =h81110o
Security software version =MDF v1.1 release 5
Click to expand...
Click to collapse
no it wont.. you are in V2 or V1 you going forward to V3.. now in V3 if you go to V2 then brick. so you are fines as you going to V3.
here is the last KDZ we got from tmobile https://forum.xda-developers.com/tmobile-g4/development/h811-kdz-file-t3607807
you need to unzip KDZ
as for LGUP.. select upgrade....theres a option there with dots to browse for file not sure if its says bin.. you click that to browse the KDZ that you unzipped. once you find it select it.. you should see the KDZ file in there.. then exit LGUP and open it again.. this time tick refurbished and the KDZ should still appear there. you just have to press start and wait till it finishes... NOTE using refurbished will erase all data..
also use a fan next to phone to keep it cool. they get really hot during procedure.
raptorddd said:
no it wont.. you are in V2 or V1 you going forward to V3.. now in V3 if you go to V2 then brick. so you are fines as you going to V3.
here is the last KDZ we got from tmobile https://forum.xda-developers.com/tmobile-g4/development/h811-kdz-file-t3607807
you need to unzip KDZ
as for LGUP.. select upgrade....theres a option there with dots to browse for file not sure if its says bin.. you click that to browse the KDZ that you unzipped. once you find it select it.. you should see the KDZ file in there.. then exit LGUP and open it again.. this time tick refurbished and the KDZ should still appear there. you just have to press start and wait till it finishes... NOTE using refurbished will erase all data..
also use a fan next to phone to keep it cool. they get really hot during procedure.
Click to expand...
Click to collapse
Alright so first I open LGUP , i select upgrade Then Browse the kdz file
Exit and reopen lgup but I Select refurbished now
Should I tick The bin file Besides the kdz file when I reopen it or before reopen it ?
Btw, How to unzip The kdz file?
It's Just a flat .kdz
Should I put my G4 in download mode before starting ?
And Just in case LgUP doesnt recognize my device what should I do ?
QuantumDroid said:
Alright so first I open LGUP , i select upgrade Then Browse the kdz file
Exit and reopen lgup but I Select refurbished now
Should I tick The bin file Besides the kdz file when I reopen it or before reopen it ?
Btw, How to unzip The kdz file?
It's Just a flat .kdz
Should I put my G4 in download mode before starting ?
And Just in case LgUP doesnt recognize my device what should I do ?
Click to expand...
Click to collapse
on LGUP if the bin file is where you browse for file only you need to find KDZ file once select and no need to select any other time .just once exit and no need to select. as it will show you in the path there..
file is h811v20.zip i meant to unzip with winrar or 7zip. to extract h811v20 xxxx.kdz. so you can find file in LGUP.
remove battery .. place battery back when phone is off press vol up
then insert USB keep pressing till a window shows in lg g4 in doenload mode.. then open LGUP. then start if you already have select it kdz file and exited and selected refurbished . then start. i do this 1 a month so its all safe. just keep phone cool with fan close by.
raptorddd said:
on LGUP if the bin file is where you browse for file only you need to find KDZ file once select and no need to select any other time .just once exit and no need to select. as it will show you in the path there..
file is h811v20.zip i meant to unzip with winrar or 7zip. to extract h811v20 xxxx.kdz. so you can find file in LGUP.
remove battery .. place battery back when phone is off press vol up
then insert USB keep pressing till a window shows in lg g4 in doenload mode.. then open LGUP. then start if you already have select it kdz file and exited and selected refurbished . then start. i do this 1 a month so its all safe. just keep phone cool with fan close by.
Click to expand...
Click to collapse
Alright I am Gonna Start The Process Tomorrow
Hopefully It works With no Problem
QuantumDroid said:
Alright I am Gonna Start The Process Tomorrow
Hopefully It works With no Problem
Click to expand...
Click to collapse
it should.. good luck.
raptorddd said:
it should.. good luck.
Click to expand...
Click to collapse
it works now iam on android 6.0
but the worst part is my sim is now locked
what should i do man ?
help !!! :crying:
QuantumDroid said:
it works now iam on android 6.0
but the worst part is my sim is now locked
what should i do man ?
help !!! :crying:
Click to expand...
Click to collapse
first i have unlocked carrier so i can use any sim..
second ive flashed lollipop 10n and all the others v20i-20o-20p-20q-20r-20s-20v and despacito rom N neither locked my carrier or sim..
how long have you had this phone.. i dont know.. do a search as i have not encounter this. search to see what you can find.. like i say ive always done this and my sim if you mean now you insert your sim card and its not registering network.. mine always worked.
raptorddd said:
first i have unlocked carrier so i can use any sim..
second ive flashed lollipop 10n and all the others v20i-20o-20p-20q-20r-20s-20v and despacito rom N neither locked my carrier or sim..
how long have you had this phone.. i dont know.. do a search as i have not encounter this. search to see what you can find.. like i say ive always done this and my sim if you mean now you insert your sim card and its not registering network.. mine always worked.
Click to expand...
Click to collapse
I bought This phone 1 month Ago
I dont know what to do now :crying:
QuantumDroid said:
I bought This phone 1 month Ago
I dont know what to do now :crying:
Click to expand...
Click to collapse
Did you solve it?
Same with me
Just A Quick Update
I have Switched My h811 To H815T (Hongkong)
Iam Not using H811 anymore
Btw Iam on latest marshmallow now
Very Happy with my h815t
QuantumDroid said:
Just A Quick Update
I have Switched My h811 To H815T (Hongkong)
Iam Not using H811 anymore
Btw Iam on latest marshmallow now
Very Happy with my h815t
Click to expand...
Click to collapse
Is it possible to upgrade from H811 to H815t? Or you mean you exchanged your H811 to H815t.. Am having the same issue with my H81110o and flashed with h811v20r. Now the phone is messed up, sim locked, no sound, camera not working and I can't afford another phone at the moment..
Stanwizzy said:
Is it possible to upgrade from H811 to H815t? Or you mean you exchanged your H811 to H815t.. Am having the same issue with my H81110o and flashed with h811v20r. Now the phone is messed up, sim locked, no sound, camera not working and I can't afford another phone at the moment..
Click to expand...
Click to collapse
I exchange my phone with the new one :v