I previously converted my XT1096 to XT1095 and when I finally decided to flash a 8.1 rom I have yet to find one with working sim detection and baseband shows unknown. I have since restored back to original XT1096 firmware and restored my original EFS and still have no luck so any help would be much appreciated.
lownslow200sx said:
I previously converted my XT1096 to XT1095 and when I finally decided to flash a 8.1 rom I have yet to find one with working sim detection and baseband shows unknown. I have since restored back to original XT1096 firmware and restored my original EFS and still have no luck so any help would be much appreciated.
Click to expand...
Click to collapse
I tried one or two unofficial 8.0/8.1 ROMs on my XT1097 and wouldn't detect the SIM card. Do you mean you still have no SIM on stock firmware? You have to flash the modem from the firmware that supports your Region/Carrier:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Right now, only Mokee has official 8.1 releases, which I haven't tried, so I don't know if it's detecting the SIM on all variants.
Gus Ghanem said:
I tried one or two unofficial 8.0/8.1 ROMs on my XT1097 and wouldn't detect the SIM card. Do you mean you still have no SIM on stock firmware? You have to flash the modem from the firmware that supports your Region/Carrier:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Right now, only Mokee has official 8.1 releases, which I haven't tried, so I don't know if it's detecting the SIM on all variants.
Click to expand...
Click to collapse
I have sim detection on stock and any 5.1-7.1.2 rooms just no luck on any of the 8.1 rooms even though others with the same variant have confirmed that they do have sim detection. I was just wondering if anyone else that converted to XT1095 had the same issues and if so how did they fix it.
lownslow200sx said:
I have sim detection on stock and any 5.1-7.1.2 rooms just no luck on any of the 8.1 rooms even though others with the same variant have confirmed that they do have sim detection. I was just wondering if anyone else that converted to XT1095 had the same issues and if so how did they fix it.
Click to expand...
Click to collapse
Try manually adding your Access Point Names (APN) under the Cellular Networks settings.
Gus Ghanem said:
Try manually adding your Access Point Names (APN) under the Cellular Networks settings.
Click to expand...
Click to collapse
None of the options under mobile network are available everything is greyed out can't change anything there and also tried dialing*#*#4636#*#* to get to pho e info and can't change anything there. I thought restoring back to 100% stock XT1096 and restoring my original modem and EFS would do the trick but it was more a wast of time lol. Hopefully with future development things will work out eventually.
Any conclusion? I just did the same with my girlfriends phone. XT1096 and flashed MOKEE 8.1, no sim detection and terrible battery drain although I have MOKEE 8.1 running on my XT1095 perfectly.
It's odd because it works in 7.1.2 on the XT1096 though. 8.1 works just fine on the XT1095
Related
Hey everyone! Not sure if the solution to this is posted somewhere else but i've got an issue (kind of) with my XT1058, a Rogers Moto X. I just unlocked the bootloader and flashed the T-Mobile zip with the 4.4 Software (and it's running beautifully btw, with minimal errors) and I seem to be able to get AWS LTE, however i've lost the 2600 MHz frequency. Anyone know if flashing the radios from the Rogers 4.2.2 file over this 4.4 T-Mobile will cause any problems? And if you can, how do you go about to do it? I'd like to get my original radios back.
superdork21 said:
Hey everyone! Not sure if the solution to this is posted somewhere else but i've got an issue (kind of) with my XT1058, a Rogers Moto X. I just unlocked the bootloader and flashed the T-Mobile zip with the 4.4 Software (and it's running beautifully btw, with minimal errors) and I seem to be able to get AWS LTE, however i've lost the 2600 MHz frequency. Anyone know if flashing the radios from the Rogers 4.2.2 file over this 4.4 T-Mobile will cause any problems? And if you can, how do you go about to do it? I'd like to get my original radios back.
Click to expand...
Click to collapse
You're better off flash the sbf 4.4 at&t modem files , the 4.2 modem firmware will cause the settings to force close on kitkat
Sent on my Moto X
Or even the retail brasil 4.4 modem files, it is a newer modem rev then AT&T has and 2600 Mhz LTE (band 7). I have used it and can confirm it works without issue but I didn't use the 2600 Mhz support(but I know 100% it has it)
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Steve-x said:
Or even the retail brasil 4.4 modem files, it is a newer modem rev then AT&T has and 2600 Mhz LTE (band 7). I have used it and can confirm it works without issue but I didn't use the 2600 Mhz support(but I know 100% it has it)
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
i falshed tmobile radio on a verizon firmware and i don t see any difference
same poor cellular band
Steve-x said:
Or even the retail brasil 4.4 modem files, it is a newer modem rev then AT&T has and 2600 Mhz LTE (band 7). I have used it and can confirm it works without issue but I didn't use the 2600 Mhz support(but I know 100% it has it)
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
So basically I download the 4.4 for Brasil and extract the non hlos and fsg files and flash them with fast boot and that should restore the radios for Rogers right? Sounds like an easy fix, I'll give it a try!
I'm loving the T-Mobile version though! It's great, just wish I can replace that 4g icon with LTE at the top
superdork21 said:
So basically I download the 4.4 for Brasil and extract the non hlos and fsg files and flash them with fast boot and that should restore the radios for Rogers right? Sounds like an easy fix, I'll give it a try!
I'm loving the T-Mobile version though! It's great, just wish I can replace that 4g icon with LTE at the top
Click to expand...
Click to collapse
Yes, that is correct.
And I agree, I'd much rather have the phone say HSPA or LTE instead of the stupid "4g" that the american providers insisted upon.
So I followed Steve-X's advice and I can confirm that it works! Just had to download the retail Brasil 4.4 firmware from the sbf portal and I used the mfastboot to flash the sequence outlined in his post above. A million thanks!!
1053 vs 1058
Tradeoff seems to be between 1053 without a couple possibly useful LTE bands and 1058 with locked bootloader and hard-to-remove ATT bloatware . Got the 1053, then the 1060 ( in hopes it might be possible to flash a new modem and gain access to magical non-existant LTE bands ) which I am returning, and may indeed get the 1058 if it seems worth the work to unlock and maybe get a more modemy device. Sense?
So I have a Chilean XT1097, which I converted to Pure. To update it to 5.0 I needed an EFS backup; if I didn't restore it I'd get a "no signal" icon on the status bar, along with no IMEI and an unknown baseband version. If I restored the EFS backup everything was fine. The thing is that I just updated to 5.1 using the OTA, and whether I restore my EFS or not does nothing; I get something even worse; status bar has a "no SIM icon", and along with the unknown baseband if I hit the IMEI combination on the Dialer instead of showing me a simple "IMEI" screen with no number, as it did on no-EFS 5.0, the app now crashes.
I've tried the following:
Updating from 5.0 with EFS restored
Updating from 5.0 with EFS restored, restoring the backup again on 5.1
Updating from 5.0 without EFS restored, restoring EFS on 5.1
On 5.0 with EFS restored, backed it up again (since previous backup was in 4.4.4), updated to 5.1, restored backup.
None of these work. Any ideas?
Thank you.
I have an XT1097 from Telus in Canada. with 5.0 I could use the modem from my providers 4.4.4 or 5.0.1 build and it worked fine. When I tried the original XT1095 5.1 soak the modem worked without any issue. I assume maybe that was simply because it was a soak test. In the final version you're using it sounds like they went back to a model specific modem again. It probably isn't compatible with a 5.0.x modem which is why it doesn't work for you. You may have no choice but to wait for 5.1 from your provider to use it. If I get time and feel like playing I may give it a shot myself this weekend.
Steve-x said:
I have an XT1097 from Telus in Canada. with 5.0 I could use the modem from my providers 4.4.4 or 5.0.1 build and it worked fine. When I tried the original XT1095 5.1 soak the modem worked without any issue. I assume maybe that was simply because it was a soak test. In the final version you're using it sounds like they went back to a model specific modem again. It probably isn't compatible with a 5.0.x modem which is why it doesn't work for you. You may have no choice but to wait for 5.1 from your provider to use it. If I get time and feel like playing I may give it a shot myself this weekend.
Click to expand...
Click to collapse
Yup, this seems to be the case. I don't have the original ROM my phone came with, so I guess I'll flash the Brazilian 5.0. I hope that when it updates to 5.1 I have no modem issues (for what it's worth, updating to 5.0 didn't require me to restore my EFS backup!).
Which phone model and provider do you have specifically, I can look for the 5.0.x update for it assuming there is one.
Steve-x said:
Which phone model and provider do you have specifically, I can look for the 5.0.x update for it assuming there is one.
Click to expand...
Click to collapse
XT1097 on Movistar Chile, latest there is 5.0.2. Shouldn't I need a 5.1-specific modem, though?
alvareo said:
XT1097 on Movistar Chile, latest there is 5.0.2. Shouldn't I need a 5.1-specific modem, though?
Click to expand...
Click to collapse
Most likely but I figured it would be nice to have the original 5.0.2 for your specific phone but I don't see it in my list of firmware.
Steve-x said:
Most likely but I figured it would be nice to have the original 5.0.2 for your specific phone but I don't see it in my list of firmware.
Click to expand...
Click to collapse
Yeah, I couldn't find it either. The closer I got was the Claro Chile (the only other carrier that offers the phone here) 4.4.4 which, due to a falling out they had with Motorola up there in Mexico, stopped selling and updating Motorola phones.
Steve-x said:
I have an XT1097 from Telus in Canada. with 5.0 I could use the modem from my providers 4.4.4 or 5.0.1 build and it worked fine. When I tried the original XT1095 5.1 soak the modem worked without any issue. I assume maybe that was simply because it was a soak test. In the final version you're using it sounds like they went back to a model specific modem again. It probably isn't compatible with a 5.0.x modem which is why it doesn't work for you. You may have no choice but to wait for 5.1 from your provider to use it. If I get time and feel like playing I may give it a shot myself this weekend.
Click to expand...
Click to collapse
Alright, the solution is to never restore EFS. I suppose it can also be accomplished by flash stock modem and fsg on 5.0.
A few details:
First, I'm running 100% stock everything. However, this issue has also happened on Cyanogenmod 13, and both Motorola support and my carrier aren't very helpful, telling me to clear the cache which obviously hasn't worked.
I did an OTA update from Android 5.1 and I get no signal at all now. I have no idea why this is, it only seems to occur on Android 6.0.
What model is your device? Have you tried just flashing the modem files for your device?
Red_81 said:
What model is your device? Have you tried just flashing the modem files for your device?
Click to expand...
Click to collapse
Apologies, I should add this as an edit. Model number says Moto X (2nd Generation), System version 24.11.18.victara_tmo.tmo.en.US tkpca. Not sure what else you need, modem files have been reflashed but still no luck Out of ideas.
what is "tkpca" end of system version? Telus ? And this FW is for T Mobile XT1095. I guess your phone is XT1097. Maybe you flashed wrong FW before update . You should flash right FW or you can flash only modem to get signal back
md07 said:
what is "tkpca" end of system version? Telus ? And this FW is for T Mobile XT1095. I guess your phone is XT1097. Maybe you flashed wrong FW before update . You should flash right FW or you can flash only modem to get signal back
Click to expand...
Click to collapse
It worked on the 5.1 FW that I flashed though, and doesn't work on any version of 6.0. I flashed the FW provided by Moto on here:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images (Moto X (2nd Gen) Pure Edition: L-5.1-LPE23.32-21.3 TMO)
(And yes I have reflashed the modem)
I had this issue too with the OTA I received on xt1092 EU. I reflashed the modem with 5.1 fw, while keeping everything else on 6.0 fw. Worked for me, might work for you too. Good luck.
I have the same issue, on what I had thought was an EU xt1092. I uploaded the xt 1095 5.1 stock files to it a while ago and rooted and it has been fine. Did Marshmallow original OTA yesterday and it's lost cell signal. Some more investigation shows the imei of the phone to a be a AU variant! Wasn't expecting that. Reflash to xt1095 stock 5.1 bought service back again. Have tried a few different modem files, But I can't get signal with 6.0. Any ideas? Or any magic modem files . I also can't sideload the EU 6.0 OTA, it fails with signature problems.
I'm experiencing the same problem. I received the OTA a few days before Christmas, and now I'm still without signal. Just tried flashing Android 5.0 modem partition (from Motorola), but it didn't work.
My phone is the XT1097, but everywhere I searched said that the XT1097 and XT1095 were the same phone. I'll try flashing the modem partition from the 5.1 recovery image, I'm just waiting for Motorola to give me access to it.
EDIT: and yes, I flashed 5.1 from Motorola and it worked like a charm. Then OTA came and it messed up my phone's signal.
I have 5.1 modem files from moto for the xt 1095 and they haven't worked for me .
StillBrilliant, did you have the 1092 modem files or the 1095 ones? If you have 1092 is there any chance you can post them.
Just flashed the 5.1 image modem, and it still doesn't work. Any ideas?
RockyTV said:
Just flashed the 5.1 image modem, and it still doesn't work. Any ideas?
Click to expand...
Click to collapse
The modems from xt1095 and xt1097 are not the same. Which xt1097 do you have?(country and carrier)
TobeXtobes said:
I have 5.1 modem files from moto for the xt 1095 and they haven't worked for me .
StillBrilliant, did you have the 1092 modem files or the 1095 ones? If you have 1092 is there any chance you can post them.
Click to expand...
Click to collapse
You need the xt1092 modem. However there is more than one xt1092. Do you have reteu, retes, or retde?
Sent from my XT1095 using Tapatalk
AGISCI said:
The modems from xt1095 and xt1097 are not the same. Which xt1097 do you have?(country and carrier)
Click to expand...
Click to collapse
My XT1097 is from Brazil, no carrier, bought it directly from Motorola's site. The weird thing I've found is that the update version has retbr in its name.
EDIT: fixed it. Found a thread that had the retail images for XT1097. Downloaded the Brazil version and flashed the modem. It works now.
I thought mine was a reteu, but not so sure now.... Imei listed it as an Australian phone! (I bought it from someone who reviews tech) I am in the UK, but now not so sure which modems I need!
TobeXtobes said:
I thought mine was a reteu, but not so sure now.... Imei listed it as an Australian phone! (I bought it from someone who reviews tech) I am in the UK, but now not so sure which modems I need!
Click to expand...
Click to collapse
In fastboot run:
fastboot getvar all
It should tell you what the phone truly is.
Sent from my XT1095 using Tapatalk
Ah, ro.carrier says reteu
TobeXtobes said:
Ah, ro.carrier says reteu
Click to expand...
Click to collapse
Ok, here is the full 6.0 for reteu:
http://www.filefactory.com/file/6q0pj4hr2sh5/VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml.zip
Use the commands in fastboot:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
That should get you back on the correct modem for your phone. Or if you want just flash everything in this zip to be 100% stock 6.0 for the reteu model.
Sent from my XT1095 using Tapatalk
Thank you, I think I might flash the whole thing back to stock with that and start again.
As a bit of a newb here, the fastboot system system.img command isn't working for this chunked image. What is the system image command for sparse, or the quickest way to rechunk them together. I've been searching but I have come up with about 15 different methods!
By the way, flashing the modem files from that image worked. Thank you but I would still like to go back to stock.
Same issue signal drop after upgrading to 6
i am having the same issue after upgrade to 6. Signal drops a lot. Works fine when connected to 3g or 4g networks, but drops to 2g networks. What could be the reason.
My phone model is moto g 2014 (XT1068) Titan
Recently I unlocked my phone's bootloader to install official lineage OS 7.1.1, I had successfully installed it everything works fine unless the network.
I tried to search the network it says error while searching networks. I have ensured that the aeroplane mode is off, I tried to clear cache, factory reset and all other related solutions, but still the problem encounters. After that I downgraded my phone to official marshammalow version, but the problem continues, when I run the caqtest I came to know that it shows the error that "phone iccid unkonwn, sim iccicd is null, phone and sim iccicd compare error"
Also i tried to turn on voice and data radio on using *#*#4636#*#* (Because it says radio is off in information status) but that does nothing
Please help me how to fix it
sumashash said:
My phone model is moto g 2014 (XT1068) Titan
Recently I unlocked my phone's bootloader to install official lineage OS 7.1.1, I had successfully installed it everything works fine unless the network.
I tried to search the network it says error while searching networks. I have ensured that the aeroplane mode is off, I tried to clear cache, factory reset and all other related solutions, but still the problem encounters. After that I downgraded my phone to official marshammalow version, but the problem continues, when I run the caqtest I came to know that it shows the error that "phone iccid unkonwn, sim iccicd is null, phone and sim iccicd compare error"
Also i tried to turn on voice and data radio on using *#*#4636#*#* (Because it says radio is off in information status) but that does nothing
Please help me how to fix it
Click to expand...
Click to collapse
Did you try with other SIM?
Yes
Yes of course I tried other sim and also both of these sims in my phone are working fine with other devices
Please help me
vayavalla said:
Did you try with other SIM?
Click to expand...
Click to collapse
First of all thanks for your reply on my post
Please help me, I just gone through all the posts related to this, but I didn't get any solution regarding this.
Sorry, no idea
Enviado desde mi Moto G 2014 mediante Tapatalk
Got the solution
vayavalla said:
Sorry, no idea
Enviado desde mi Moto G 2014 mediante Tapatalk
Click to expand...
Click to collapse
Hey there,
I got the solution, my phone is working perfectly alright now,
Here i am explaining what i did to solve this network issue because this might help somebody who are facing the same problems related to network.
I just downloaded the official Marshmallow 6.0 stock ROM for this Indian Model Moto G 2014 XT1068 (Dual Sim)
And then connected my phone to PC in fastboot mode
And then using the mfastboot tool i did only flash NON-HLOS.bin and fsg.mbn using the command
Thats it
Note: My phone is running on Lineage OS 7.1.1 titan version and i flashed the modem files of Marshmallow Version
sumashash said:
Hey there,
I got the solution, my phone is working perfectly alright now,
Here i am explaining what i did to solve this network issue because this might help somebody who are facing the same problems related to network.
I just downloaded the official Marshmallow 6.0 stock ROM for this Indian Model Moto G 2014 XT1068 (Dual Sim)
And then connected my phone to PC in fastboot mode
And then using the mfastboot tool i did only flash NON-HLOS.bin and fsg.mbn using the command
Thats it
Note: My phone is running on Lineage OS 7.1.1 titan version and i flashed the modem files of Marshmallow Version
Click to expand...
Click to collapse
Didn't you say before that you had flashed stock?
Hi,
I'm using MetroPCS service w/ sim card my Moto E5 Play XT1921-5 (Sprint Firmware). The phone came with Assurance Wireless out of the box. Talk and text work fine but data does not work whatsoever. I've tried every combination of t-mobile's and Metro PCS's APN settings but to no avail. I've done the OEM unlock and applying the fix included in the"XT1921-5 AUTO_APN PERMANENT" zip file via the ADB tool, drivers and all.
I entered in one of the latest recommended official APN settings and now I get an error saying that the APN settings aren't even available anymore and I get the error now when I try to even click on the apn settings tab in android. Talk and text still work though. There was never an option to add APN settings in the first place. I could only edit the two existing APN profiles. I tried running InfinityBox AST to apply the fix but I got a "smart card not found" error.
I've reset the network settings multiple times along with doing a couple factory resets.
Anyhow, I'm wondering if the data issue is because it's innately a sprint phone? Is it possible to flash my phone with the MetroPCS or T-Mobile firmware or is there a universal/unlocked firmware that I can flash it with (without bricking it)? Perhaps I should flash it with custom firmware, if it's possible to root my model. Please let me know what the best course of action is to take.
Thanks
Sakima said:
Hi,
I'm using MetroPCS service w/ sim card my Moto E5 Play XT1921-5 (Sprint Firmware). The phone came with Assurance Wireless out of the box. Talk and text work fine but data does not work whatsoever. I've tried every combination of t-mobile's and Metro PCS's APN settings but to no avail. I've done the OEM unlock and applying the fix included in the"XT1921-5 AUTO_APN PERMANENT" zip file via the ADB tool, drivers and all.
I entered in one of the latest recommended official APN settings and now I get an error saying that the APN settings aren't even available anymore and I get the error now when I try to even click on the apn settings tab in android. Talk and text still work though. There was never an option to add APN settings in the first place. I could only edit the two existing APN profiles. I tried running InfinityBox AST to apply the fix but I got a "smart card not found" error.
I've reset the network settings multiple times along with doing a couple factory resets.
Anyhow, I'm wondering if the data issue is because it's innately a sprint phone? Is it possible to flash my phone with the MetroPCS or T-Mobile firmware or is there a universal/unlocked firmware that I can flash it with (without bricking it)? Perhaps I should flash it with custom firmware, if it's possible to root my model. Please let me know what the best course of action is to take.
Thanks
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my Moto E (4) using Tapatalk
I found it that it's not working because it's the sprint firmware. So can I flash the phone safely with MetroPCS firmware?
Sakima said:
I found it that it's not working because it's the sprint firmware. So can I flash the phone safely with MetroPCS firmware?
Click to expand...
Click to collapse
Not the full firmware if the bootloader is locked.
You likely can flash the modem firmware.
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Sent from my ocean using XDA Labs
What's the correct file to utilize to flash with adb? Is there a separate one for T-Mobile and sprint? If so, which carrier files should I use?
Should I use the file from the following web page?:
https://www.getdroidtips.com/stock-rom-sprint-moto-e5-play/
Can the modem firmware be extracted from the main MetroPCS firmware or do I have to download it separately from somewhere else?
Sakima said:
Can the modem firmware be extracted from the main MetroPCS firmware or do I have to download it separately from somewhere else?
Click to expand...
Click to collapse
Firmware is available from
https://mirrors.lolinet.com/firmware/moto/
Run
Code:
fastboot getvar all
To find codename, software channel, software version.
See
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Or you can post the getvar all here and I'll try to help.
Sent from my ocean using XDA Labs
Sakima said:
Can the modem firmware be extracted from the main MetroPCS firmware or do I have to download it separately from somewhere else?
Click to expand...
Click to collapse
I can assist you in flashing the entire firmware if you are ok with unlocking the bootloader.