So like the title said i have replaced the battery in my P9, with an original battery. It has the same part number and all that. I have noticed that the phone won't charge the replacement battery, i have returned the new battery in warranty and revived another one. Same thing, the phone starts up as soon as you plug in any kind of power source to it , like a charger, but no charging notification. The notification light pulses in rare intervals (some thing of 10 secs or more) but it's not steadily on like when normally charging. And the most vexing thing is : if i replace the original battery it charges. Unfortunately the the original battery now has the bad habit of cutting out on me at random from anywhere 47% or bellow .... The phone is nearly 3 year old now.
Have you given the new batteries some time to charge? Maybe they were delivered to you fully discharged.
First one was on 85% the second on 60% or so. I kept the 1st one on charger for a whole weekend... Still nothing
Have you tried to callibrate the original battery (you say it suddenly drops if below 40%)?
Yes, I have allowed the battery to run down to 3% and the phone turning itself off. Then fully charged it while being off. So the original battery is just plain old, nearly 3y old. The problem is that the phone refuses to charge the new batteries regardless of original charge. Also it turns automatically on when you plug in a charger, not just showing the charge animation. That is not normal behavior.
olaf2k4 said:
Recalibrate how?
Click to expand...
Click to collapse
Did you try to search?!
There is a thread on battery calibration (XDA, Huawei P9, Q and A
https://forum.xda-developers.com/showpost.php?p=75592069&postcount=18
zgfg said:
Did you try to search?!
There is a thread on battery calibration (XDA, Huawei P9, Q and A
https://forum.xda-developers.com/showpost.php?p=75592069&postcount=18
Click to expand...
Click to collapse
I've done that after reading you'r message , but i have already done the steps not req root. And i'm not willing to root my phone.
P9 also not charging
Did you manage to find a resolution to this issues? I'm having the same problem with my P9. I changed my battery, and it now won't charge. It turns on ok, and everything seems to be working. When I plug in the charging cable, it makes the sound it usually does, the battery symbol flashes green but instantly turns white again. When the phone is off, plugging the cable in switches it on, but no charge. I've had two replacement batteries, both have the same issue. Also, the original battery is now doing the same. I'm wondering if I damaged something while removing the battery.
domj81 said:
Did you manage to find a resolution to this issues? I'm having the same problem with my P9. I changed my battery, and it now won't charge. It turns on ok, and everything seems to be working. When I plug in the charging cable, it makes the sound it usually does, the battery symbol flashes green but instantly turns white again. When the phone is off, plugging the cable in switches it on, but no charge. I've had two replacement batteries, both have the same issue. Also, the original battery is now doing the same. I'm wondering if I damaged something while removing the battery.
Click to expand...
Click to collapse
I think it's problem in charging IC or port.
Hi all
Had same issue with replacement battery
After replacement battery isn't charging. Problem is in bad connections
(probably from long shelf storage connectors got rusty)
Voltage was fine but temperature reading was way off (very low -2) and phone didn't charge battery
Problem is that there was no error message about battery temp.
After cleaning the contactors battery reading became normal and it started charging
Anybody ever had any solution to this problem? I have the same issue. Battery replaced - not taking any charge. If micro USB charger plugged in - the phone turns on. If it is already turned on plugging in the charger the screen flashes the % of the charge and nothing.
Related
I have this strange problem that just cropped up. After a full recharge the other day the battery showed normal draining. When I tried to recharge it wouldn't; neither from the wall charger or usb by computer. So the battery showed steady drain unless charging, but never got more charge. Finally when turning on the phone on battery alone it shows 1% charge, and there's nothing I can do about it, the phone will turn itself off.
Diagnostics: I measured the battery voltage and it is ~4.2 volts. This seems like a full battery yet the phone doesn't see it.
I measured the voltage at the battery terminals in the phone while hooked up to charger which was ~4.2 volts. So it seems the battery is being charged.
Why is the phone not seeing the battery charge? Is the battery dead even though it measures 4.2v?
I did run the gps before this happened using gps tool, bit I think I turned it all off. Anyway more than one soft reset didn't help.
Thanks,
Ed
ATT Tilt 8925 running gthing Blackwood rom with Vista BatteryHide. Original ATT radio.
No real answer here but perhaps something to try:
I am dealing with another member who has a similar problem.
http://forum.xda-developers.com/showthread.php?t=377675&page=2 From post 17 onward.
With battery in, the orange charge light comes on and all seems normal. However with a few seconds of turning on the message that the main battery is critcally low comes up and the phone turns off. He has tried another battery with the same result. This happens even with the charger connected.
(EDIT: I have now read that his has - for no obvious reason started to work ok - Now even more convinced it's a charging circuit lock-up issue - given time and possibly a bit of battery fiddling and it comes good in the end - see No 2 below)
Now I'm wondering whether this could be one of two things:
1.
A hardware fault - possibly in the charging circuit or more crudely one of the battery circuit board connectors is not connecting.
OR
2.
The circuit that controls charging has to put it crudely become "stuck" in a similar fashion to those who get the RLOD red LED showing when they connect the charger. A commonly accepted trick for overcoming the RLOD is to connect the charger and wriggle the battery on and off the four contact pins. This presumably has the effect of forcing the charging circuit to re-set itself. I just wonder whether it might have the same effect in your situation.
Mike
hey.. that would be me with the similar issue.
i just tried a couple more things.. check out the thread.
More info.
Battery in and out holding the power button had no effect. Phone runs fine while plugged in. Plug it in and after 5 seconds the amber LED turns to red. While plugged in the red led will flash amber every so often.
I measured the battery voltage as I turned the phone on, it dropped to ~ 3.98v, then came back to 4.1v as the phone turned itself off. It gets all the way to my Today screen before going off. Just sitting in the phone with it off is 4.1v. Hook up the charger and the battery sees 4.18 and rising after 20 seconds. These are direct measurements at the battery terminals while in the phone.
So this looks like a software issue to me. The phone is charging the battery and there is plenty of power to run the phone, the phone somehow doesn't see it that way. It sees a dead battery. Well, I guess it could be a voltage sensor gone bad , somewhere somehow. Next step is to hard reset and see if it makes any difference.
edit: While plugged in and the screen on, the led stays amber. When the screen goes off(set for 2 minutes) the led turns red. Screen back on, led amber. I just set the screen not to go off while plugged in(charging), we'll see. The power is showing 7% now and says charging, too early to tell if it's rising or not.
edit 2: It stayed on the charger for several hours and never moved past 7%. Tried a hard reset with no luck. Next step is to send it to a repair shop(I bought it used) and hopefully spend only the $95-$125 they quoted.
Will keep you apprised.
Ed
elknimrod said:
I have this strange problem that just cropped up. After a full recharge the other day the battery showed normal draining. When I tried to recharge it wouldn't; neither from the wall charger or usb by computer. So the battery showed steady drain unless charging, but never got more charge. Finally when turning on the phone on battery alone it shows 1% charge, and there's nothing I can do about it, the phone will turn itself off.
Diagnostics: I measured the battery voltage and it is ~4.2 volts. This seems like a full battery yet the phone doesn't see it.
I measured the voltage at the battery terminals in the phone while hooked up to charger which was ~4.2 volts. So it seems the battery is being charged.
Why is the phone not seeing the battery charge? Is the battery dead even though it measures 4.2v?
I did run the gps before this happened using gps tool, bit I think I turned it all off. Anyway more than one soft reset didn't help.
Thanks,
Ed
ATT Tilt 8925 running gthing Blackwood rom with Vista BatteryHide. Original ATT radio.
Click to expand...
Click to collapse
Att Tilt Power/Battery Issues.
I am having somewhat similar issues with my Tilt, with the power/battery problems as described previously. I woke up this morning, and attempted to turn my phone on, and it wouldnt come on at all. I then plugged it into the ac adapter, and the LED comes on, and goes green. I waited a few moments, then powered the phone on to take a look at the battery life, and the phone boots up, then reboots during the splash screen. After it reboots itself, I check the battery indicator and it shows 1%. If I exit the battery screen, and re-enter it, it will say 100%. Now, as soon as I remove the charger from the system, it automatically powers down. I played with it for about 15 minutes, but needed to head to work, so I took the phone with me, and attempted to use my car charger. Same problem. Now, I figured, fine, I'll see how it behaves while I am at work, so I brought my charger to work, and have it plugged in at my desk, and if I leave it plugged in and on, it stays on for about 5 minutes, then automatically reboots. LED stays green, but phone will not stay on, if unplugged, or plugged in for longer than 5 minutes. I have never dropped it, and have babied the phone like no other, concidering I paid $400 for it. I'm a little bummed out, but cant determine if its a battery or hardware problem. Any advice/input for me from any of you guys? before I head to the ATT store, and cry for a new phone? Thanks a bunch for any responses to this.
*UPDATE* After I got off work, I went into my local ATT store, explained the situation, and was given a brand new replacement phone in like 10 minutes. I was under 30 days owning it, so he just swapped it out, barley any questions asked. (altho i explained my situation in detail as it was). So.... hopefully it doesnt happen again, or else I'll have to use the warranty. Anyways, Any insight on what may cause this would always be helpful for both myself and the community. =)
new news
EDIT: They got it Monday and I got it back Friday. Good turnaround! They fixed the problem, it works perfectly now. I recommend these people.
Ed
Sent it off to Cell Phone Repair(CPR) in Chicago that gave me an estimate of $95 (inc. ship. back) based on my description. They just called and told me it was corrosion around and in the power/usb port. They got it yesterday and will send it back repaired tomorrow with a 90 day warranty. No more saunas for this phone(it was only one! )
I'll let you know if they work out well or not.
Ed
elknimrod said:
I have this strange problem that just cropped up. After a full recharge the other day the battery showed normal draining. When I tried to recharge it wouldn't; neither from the wall charger or usb by computer. So the battery showed steady drain unless charging, but never got more charge. Finally when turning on the phone on battery alone it shows 1% charge, and there's nothing I can do about it, the phone will turn itself off.
Diagnostics: I measured the battery voltage and it is ~4.2 volts. This seems like a full battery yet the phone doesn't see it.
I measured the voltage at the battery terminals in the phone while hooked up to charger which was ~4.2 volts. So it seems the battery is being charged.
Why is the phone not seeing the battery charge? Is the battery dead even though it measures 4.2v?
I did run the gps before this happened using gps tool, bit I think I turned it all off. Anyway more than one soft reset didn't help.
Thanks,
Ed
ATT Tilt 8925 running gthing Blackwood rom with Vista BatteryHide. Original ATT radio.
Click to expand...
Click to collapse
My Diamond won't charge to full capacity! I tried to charge it overnight two times and the first time my telephone charged it was 70 procent charged after 1 night. (7/8 hours) and the second night (5/6 hours) with the same percent when i woke up. I had it once 100% but after installing hardSPL and the hardreset it drop instantly to 40%. (i just installed that , and nothing more.)
Connected the telephone to the charger again and i've got a full lit led ring. After turning the device on the ring went 'charging' again. The capacity was 75%. In windows.
kenny89 said:
My Diamond won't charge to full capacity! I tried to charge it overnight two times and the first time my telephone charged it was 70 procent charged after 1 night. (7/8 hours) and the second night (5/6 hours) with the same percent when i woke up. I had it once 100% but after installing hardSPL and the hardreset it drop instantly to 40%. (i just installed that , and nothing more.)
Connected the telephone to the charger again and i've got a full lit led ring. After turning the device on the ring went 'charging' again. The capacity was 75%. In windows.
Click to expand...
Click to collapse
Definatly sounds like a faulty cell in your battery
At least its not the phone thats broken, a battery is easily replaced.
I also have a strange battery issue! Mine won't charge if the Diamonf is switched on.
The Battery only will charge if I switch the Touch Diamond OFF, If it’s turned off, not only the display. With Running OS, when I plug the AC adaptor, it only show few seconds the charging breathing LEDs and then stops, the indicator also doesn’t show the charge symbol but the full charged battery instead but the LED indicator is not full white as it should be in full charge state and the battery of course drains down… I’ve tested with another AC adaptor, another USB charger, even car charger (I have the HTC original one), still the same behaviour.
Could this be related to the developer HardSPL? I also have this behaviour after that installation... weird
Any kind of help would be appreciated!
Its unlikely its the hardspl. I would guess hardware issue, but if it charges while off then thats unlikely too.
I assume you've tried a hard reset already to rule out any application interferring with it?
Also what happens when you plug into your PC? same thing?
My best guess at this stage with most likely at the top:
1) Software issue - try hard reset
2) Battery issue - try another battery, or once fully charged look for a big drop in battery very quickly. There are some battery manager/monitors you can download which can monitor the voltage for you. If you can show me the drop in voltage of the battery i can conclusivly tell you if the battery has a fault.
3) Hardware issue with the phone - that would just suck!
update: Replaced my battery and charged it through the adapter, full 100%.But here's something that is stranger... I installed the battery in another diamond and that battery indicator was 100% full..
I hope that it was a battery problem, because i had so much troubles with the diamond so far! The new battery is lasting much longer, it's been 6hours and it didn't even lost a bar. (still 100%)
kenny89 said:
update: Replaced my battery and charged it through the adapter, full 100%.But here's something that is stranger... I installed the battery in another diamond and that battery indicator was 100% full..
I hope that it was a battery problem, because i had so much troubles with the diamond so far! The new battery is lasting much longer, it's been 6hours and it didn't even lost a bar. (still 100%)
Click to expand...
Click to collapse
A fully charged cell has about 4.3v across it. As its drained of current the voltage drops to about 3.3v, when its fully depleted.
The phone uses this voltage level to display the current capacity of the battery
If a cell fails in the battery, as its capacity reduces its not able to provide enough current. Power = current x voltage
If the phone tries to draw normal current, the voltage drops excessivly to conserve the above formula. This shows in the phone as a decrease in battery capacity. The voltage across the battery drops to below 3.3v before the remaining cells are depleted, and although there is still enough current to suply the phone, there isnt enough voltage. Overall there isnt enough power (P=IV)
A rested battery may show enough voltage for a short while (when you first put it in) but the voltage will drop drasticly as soon as any significant current is drawn.
This is a really common failure in a bettery, and you can spot it very quickly when you see sharp drops in the battery meter.
someone1234 said:
I
Also what happens when you plug into your PC? same thing?
Click to expand...
Click to collapse
Yes, same thing...
My best guess at this stage with most likely at the top:
1) Software issue - try hard reset
Click to expand...
Click to collapse
Don of course and even reflashed without installing any application, just synced with PC... same issue. In the mean time I even reflashed the stock SPL to try... and the Diamond is now charging in Off modus, so I'll turn it on tomorrow to give it a trial
2) Battery issue - try another battery, or once fully charged look for a big drop in battery very quickly. There are some battery manager/monitors you can download which can monitor the voltage for you. If you can show me the drop in voltage of the battery i can conclusivly tell you if the battery has a fault.
Click to expand...
Click to collapse
I guess the Battery has an issue, but none is available quickly in my country, I'll have to try to order one abroad... let's check...
Thanks anyway for your advices...
I flashed my TD from 1.37.081 to 1.37.707.1 today and my battery went to 30 percent and not long after it wend dead again.
But there's something strange that i've discovered today.. my charger charges my phone really slow (with original cable and charger) but with the 3rd party adapter i charged todat (adapt htc, specifications are the same of the original adapter) it's normal and my phone doesn't warm up ( max 20 degrees celcius) so much as with the HTC adapter (40 or more degrees celcius?).
I flashed my TD from 1.37.081 to 1.37.707.1 today and my battery went to 30 percent and not long after it wend dead again.
But there's something strange that i've discovered today.. my charger charges my phone really slow (with original cable and charger) but with the 3rd party adapter i charged todat (adapt htc, specifications are the same of the original adapter) it's normal and my phone doesn't warm up ( max 20 degrees celcius) so much as with the HTC adapter (40 or more degrees celcius?).
Check the current on the 3rd party charger.
kenny89 said:
(adapt htc, specifications are the same of the original adapter)
Click to expand...
Click to collapse
output 5V/1A , same specs. input is a little different (110-220hz, 0,2A) against (110-220hz, 0,15A).. but that isn't a problem right? The output is the same.
Thats really strange. Yeah its the output that matters,
There should be no difference at all!
Yeah.. my Touch Diamond is f**** up as h****.. that's not only the problem. I used some GPRS today and my phone makes noises just like when you put a telephone next a speaker and it receives sms/calls. That's when i'm surfing on the web :O!
On top of that, my speaker quits after x seconds/minutes and doesn't make any sound at all and then works after x seconds/minutes. But it doesn't work after x seconds in the Touch Flo mp3player. So my ' precious diamond' is pretty worthless right now.
XzaniX said:
I also have a strange battery issue! Mine won't charge if the Diamonf is switched on.
The Battery only will charge if I switch the Touch Diamond OFF, If it’s turned off, not only the display. With Running OS, when I plug the AC adaptor, it only show few seconds the charging breathing LEDs and then stops, the indicator also doesn’t show the charge symbol but the full charged battery instead but the LED indicator is not full white as it should be in full charge state and the battery of course drains down… I’ve tested with another AC adaptor, another USB charger, even car charger (I have the HTC original one), still the same behaviour.
Could this be related to the developer HardSPL? I also have this behaviour after that installation... weird
Any kind of help would be appreciated!
Click to expand...
Click to collapse
Check your settings: settings > power > checked off the "when device is turned on, do not charge...." ?
kenny89 said:
Yeah.. my Touch Diamond is f**** up as h****.. that's not only the problem. I used some GPRS today and my phone makes noises just like when you put a telephone next a speaker and it receives sms/calls. That's when i'm surfing on the web :O!
On top of that, my speaker quits after x seconds/minutes and doesn't make any sound at all and then works after x seconds/minutes. But it doesn't work after x seconds in the Touch Flo mp3player. So my ' precious diamond' is pretty worthless right now.
Click to expand...
Click to collapse
That noise is caused by a harmonic of the GSM signal. It sounds like the grounding is not correct, either for the speaker or possibly a whole section of the circuit.
Not good!
I have the same thing - battery left on overnight does not result in 100% indication. Yet it often creeps up much higher after I have removed the charger! Have come to the conclusion that it is a software problem - terminal voltage tests OK.
bakman said:
Check your settings: settings > power > checked off the "when device is turned on, do not charge...." ?
Click to expand...
Click to collapse
-hi Bakman, of course this was my first check Anyway, is getting worse, now it even won't charge when switched off So I'll send it for repair I guess... I hate to wait for a new device, pay a huge amount of money for it and when you finally get it, it's defective
robinbb said:
I have the same thing - battery left on overnight does not result in 100% indication. Yet it often creeps up much higher after I have removed the charger! Have come to the conclusion that it is a software problem - terminal voltage tests OK.
Click to expand...
Click to collapse
Same issue here. When charging the phone while it's *on*, it results in the indicator stopping at 75%-80%, no matter how long I charge.
I think once when charging through PC/USB, this did not happen and the battery did charge to full.
A soft reset results in the indicator displaying 100% battery however.
So is this a battery problem, or software/hardware problem?
Ildefonse said:
Same issue here. When charging the phone while it's *on*, it results in the indicator stopping at 75%-80%, no matter how long I charge.
I think once when charging through PC/USB, this did not happen and the battery did charge to full.
A soft reset results in the indicator displaying 100% battery however.
So is this a battery problem, or software/hardware problem?
Click to expand...
Click to collapse
Sounds definately like a s/w problem to me, they will have to provide a fix in a ROM update I guess. Mine is OK at the minute though. Is yours UK or grey import?
Err, I bought the WWE version in Holland. Actually someone bought it for me, but that's not the point.
I did find out that using the advanced config tool to disable the setting "GPRS auto attach" really saves a lot of battery power! Yesterday my phone was idling the whole day and night, and battery only dropped 10-20%.
Hi,
Just purchase 2 HTC HD2 replacement batteries from ebay (Non original)
and facing a problem in charging both of them.
When I power up the phone it shows 80%, but when charger is connected,
it does not show the charging icon and the notification LED keeps blinking between amber and green.
Any one got any idea? Both the batteries defective?
I use a meter to measure the batteries, one got 4v the other 4.02v.
Seems ok but just cannot charge inside the phone.
Help and advise needed. Thank you.
Got the same issue here. They will charge up to 68% then stop.
Have to turn off phone and plug in again to charge the final bit - OR - take them out and put in caddy charger.
Battery replacement charging problem
I also have the same problem but this issue happen only if you use the device while charging the battery. If the issue occur try turn off the screen (not power off) and wait around 3-5 mintues then it continue charging the battery without any problem. The problem is occur only if we use the power too much such as Telephone call, Wifi, GPS then it back to blink green and amber again and again. Howerver I found out that sometime after soft reset the battery report it have been charge during green and amber blinking (in my case I upload youtube of 120MB and take quite a long time around 2-3 hours the battery indicate 6% and not increased until I softreset them then become 72%)
Howerver, this is almost not acceptable since it should be charged normally in any condition.
touchu said:
I also have the same problem but this issue happen only if you use the device while charging the battery. If the issue occur try turn off the screen (not power off) and wait around 3-5 mintues then it continue charging the battery without any problem. The problem is occur only if we use the power too much such as Telephone call, Wifi, GPS then it back to blink green and amber again and again. Howerver I found out that sometime after soft reset the battery report it have been charge during green and amber blinking (in my case I upload youtube of 120MB and take quite a long time around 2-3 hours the battery indicate 6% and not increased until I softreset them then become 72%)
Howerver, this is almost not acceptable since it should be charged normally in any condition.
Click to expand...
Click to collapse
Do you guys think this is due to "low quality" batteries that could not be charge properly in the phone. Can only be charged using cradle....??????
same issue here, except mine will go amber/green regardless of power % left.
I have seen mine doing amber/geen even when it'[email protected] 10% with screen off.
That would all seem to point at the phone drawing more power than can be put in the battery at the same time.
I reported it to the ebay seller in anycase, who says he will contact the factory.
cheap ebay batteries causing problems?
My cheap battery does the same if I use cheap craddle that came with it. However if I use original charger and stock cable it is all fine.
Oh yes and original battery used in cradle does the same orange/green.
However in any case living it for 3-4 minutes starts charging process.
When it's charged up fully it's def a massive improvement on the original though. I can get almost 50 hours out of it now, the original one I had only got 24 at a push
blanco360 said:
When it's charged up fully it's def a massive improvement on the original though. I can get almost 50 hours out of it now, the original one I had only got 24 at a push
Click to expand...
Click to collapse
what actual battery do you have Blanco, any chanve of a link to where you bought it, i have ordered a momax but are still waiting, this standard battery is killing me
this one
http://cgi.ebay.co.uk/New-2x-Batter...ries_MobilePhoneBatteries?hash=item2a035b4473
blanco360 said:
this one
http://cgi.ebay.co.uk/New-2x-Batter...ries_MobilePhoneBatteries?hash=item2a035b4473
Click to expand...
Click to collapse
thanks for that, and you definatly think it lasts longer than the original htc ? are you a heavy user?
Yes - BUT - mine came with a 750mA, and I think you guys will have a 1230 right?
Ok basically I had my first battery drained completely (my phone was around 1 year ++).
I've been experiencing battery drains on my phone such that it is discharging faster than it chargers and I also realized that I'm unable to connect to the PC/ unable to mount SD card.
Knowing that my problem exists, I went on to a repair shop and they replaced my port for $S90 SGD. After replacing my port, I was happy that my phone can finally be connected to my PC without any problems..
Until one day, I realized my phone was discharging faster and soon it reaches 0% on my screen. I quickly plugged in the AC wall adapter and continuing using (by right it shouldn't go flat). To my surprise it went flat and I couldn't charge my battery at all, I was having the Orange LED light.
So I went to the repair shop again and they sort of bumped my battery up and charged my phone. Seeing that my battery discharges faster than it charges, they told me they my battery is damaged and so I went on to get a new battery...
New battery came, I plugged in, turned my phone on successfully without any problems. Battery was at 65%. I left it few hours to charge and WTF my battery turns to 19% and eventually flatten out again .
Now here's the thing.
My 1st battery, (Totally unable to charge, No blinking orange LED)
My 2nd battery, when I leave it for a few hours (I plugged it in and there's orange LED), and soon there's not even an orange LED light anymore.
I really do not know what the hell is wrong with my phone. I'm so disappointed. I just thought that it might not be my battery's problem because a brand new battery shouldn't have any problems..
Really need some advice noww :crying:
Gonna cry. Wth is wrong with my phone?!
xLuck515 said:
Really need some advice noww :crying:
Gonna cry. Wth is wrong with my phone?!
Click to expand...
Click to collapse
You might have apps that are drawing too much current, a charger that's not supplying enough or is not recognized as ac charging.
Install current widget or something similar to see both how fast your battery is draining and how much current the charger is supplying.
xLuck515 said:
Really need some advice noww :crying:
Gonna cry. Wth is wrong with my phone?!
Click to expand...
Click to collapse
My old Inc S did the same thing as what your describing, and the charger port was faulty. I had to wiggle the cord into the perfect position to get it to charge, and even then it only actually charged half the time. Got it replaced by bell.
When you plug your charger cord in, does it wiggle a lot to the left or right? As in more that it normally should?
Nonverbose said:
You might have apps that are drawing too much current, a charger that's not supplying enough or is not recognized as ac charging.
Install current widget or something similar to see both how fast your battery is draining and how much current the charger is supplying.
Click to expand...
Click to collapse
The problem is I can't even turn on my phone at all to install any apps because my battery is completely drained. I just don't get it how come my phone drains the battery faster than it charges. Perhaps it's my charger not supplying enough power .
It's my second battery already and I'm now sure that it is not a battery problem.
Should I change an adapter (like maybe the iPhone adapter head) and use my usb cable to charge my phone. Will it provide more current
ZaySk said:
My old Inc S did the same thing as what your describing, and the charger port was faulty. I had to wiggle the cord into the perfect position to get it to charge, and even then it only actually charged half the time. Got it replaced by bell.
When you plug your charger cord in, does it wiggle a lot to the left or right? As in more that it normally should?
Click to expand...
Click to collapse
Well, I am not sure whether if it was charging port that was fault. It indeed charged when I tried my 2nd battery when it first came it had 65%. I went on to charge it and the percentage drops when it was charging (when the phone is off) . Perhaps it's not the apps that are draining all the current.
My phone is losing current... My 2nd battery is also completely drained off after sometime and I'm unable to on my phone. Irritating max.
My charging port just got replaced because I cannot mount my SD to the computer and I had it replaced and I was able to connect to the computer and LED indicates it charges.
What could be the other reasons that my phone is losing current? I'm not sure about hardware parts, but maybe perhaps it's the charging gland or whatever things inside the phone that is damaged?
Leave charger plugged in while light flashing. If the light goes off unplug and plug again. You might need to do a few times but the orange light should stay on eventually. Let it charge a while before switching back on. Good luck.
The other day I was in a hospital and my phone was next to the bed but the charger wire was tangled in the bed. So a nurse came up and rolled out the bed and the phone fell from quite high on the (hard) floor.
It still worked, screen wasn't cracked so I didn't think much of it.
But now, the phone can be charged with the charger. As soon as I unplug the charger there are 2 things that can happen:
1. The phone keeps saying it's charging. Other than that the phone is fully functional. Battery drain is much higher though, in 10 minutes I lose 7% battery.
2. The charging icon in the battery will flash on and off. When I switch off the screen, the lock-screen immediatly turns on and the text charging blinks, it's like someone is plugging in the charger and takes it out immediatly, battery drain is even higher when this occurs, I lose 50% within the hour, depending of what I'm doing.
Sometimes the problem is not there, the phone will function normally, but the problem will come back within 1 or 2 hours and usually when I plug in a charger and take it out later. Also, sometimes it seems the phone is not charging and the charge indicator will stay at a certain percentage but when I reboot the phone it it fully charged (according to the indicator).
First I thought it was an android problem. But when I switch off the phone the charging image appears as well and starts blinking, also the menu and back button flash on and off. It's also quite difficult to switch on the phone at this point and the battery image shows only the outline of the battery, not how much charge is in it.
So far I tried 2 other chargers, 2 other batteries (1 original Samsung and 1 after market). Rebooted the phone many times and left the battery out for an hour.
Anyone knows of what causes such a problem? Of course, the fall was the start of the problem. Could there be some pins bent in the usb socket of the phone?
vinz3nt said:
The other day I was in a hospital and my phone was next to the bed but the charger wire was tangled in the bed. So a nurse came up and rolled out the bed and the phone fell from quite high on the (hard) floor.
It still worked, screen wasn't cracked so I didn't think much of it.
But now, the phone can be charged with the charger. As soon as I unplug the charger there are 2 things that can happen:
1. The phone keeps saying it's charging. Other than that the phone is fully functional. Battery drain is much higher though, in 10 minutes I lose 7% battery.
2. The charging icon in the battery will flash on and off. When I switch off the screen, the lock-screen immediatly turns on and the text charging blinks, it's like someone is plugging in the charger and takes it out immediatly, battery drain is even higher when this occurs, I lose 50% within the hour, depending of what I'm doing.
Sometimes the problem is not there, the phone will function normally, but the problem will come back within 1 or 2 hours and usually when I plug in a charger and take it out later. Also, sometimes it seems the phone is not charging and the charge indicator will stay at a certain percentage but when I reboot the phone it it fully charged (according to the indicator).
First I thought it was an android problem. But when I switch off the phone the charging image appears as well and starts blinking, also the menu and back button flash on and off. It's also quite difficult to switch on the phone at this point and the battery image shows only the outline of the battery, not how much charge is in it.
So far I tried 2 other chargers, 2 other batteries (1 original Samsung and 1 after market). Rebooted the phone many times and left the battery out for an hour.
Anyone knows of what causes such a problem? Of course, the fall was the start of the problem. Could there be some pins bent in the usb socket of the phone?
Click to expand...
Click to collapse
I had a problem recently in which even though I kept my phone on charging (and it showed that it is charging), the battery percentage either remained same or it went down even though it was plugged in.. went to samsung and they said the usb port is damaged and they replaced it.. I think the same resolution will be for your problem
Mmm....makes sense. What does Samsung charge for that?
Sent from my GT-P7310 using XDA Premium HD app