Database Develop

[Q&A] [ROM][4.4.2]Kitkat STABLE V2

Q&A for [ROM][4.4.2]Kitkat STABLE V2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

pranavaryans said:
its buggy. may b ill upload pie etc in next vrsion
Sent from my Q1000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have the following problem by connecting a mini bluetooth keyboard is recognized only then that does not work.

bluetooth keyboard
I have a problem I connected a bluetooth keyboard just that I recognized and configured in the settings bluetooth only that the system does not work.

are the bugs fixed? like slow wifi connection?

hi dev. im Having trouble here. i did a full wipe. my first installed got stock in bootloop. and second install somehow survive "the bootloop" i thought. it actually load the screen. but just keep restarting.. help please.
---------- Post added at 12:19 PM ---------- Previous post was at 11:57 AM ----------
please provide me steps how to install..onejay's runny kitkat and pacrom works well with me. and i want to try this one..thanks..

i need help, i did a full wipe and still ended up in bootllop. tried it three times with the same outcome. please give me the steps in flashing.. just a newbie hope you could help, thanks.

basic steps
1. install twrp recovery
2. copy rom .zip to sd card directory
3. go to recovery
4. select wipe option > advanced wipe > tick on dalvic, cache, data, android secure and system ( no sdcard should be ticked)
5. click on WIPE
6. go to home of TWRP
7. click on install
8. go to directory where you had been put rom.zip
9. click on rom.zip
10. slide the progress bar to right nd installation starts
11. after installation select wipe dalvic and cache option
12. then click on "back"
13.there should be now "reboot to system" option will be seen.
14.selct it
15. wait for 3 to 4 min for bootup process
16.for confirmation try to connected to pc by cabel, when it will be completed your mobile as well as pc will give you sound and red light on mobile
17. done

why is the download link showing "complete an offer"?

Too bad I can't just post this in the right thread but here goes:
I also want to help you test and would love to see a 4.4.4 come to my sensation XL. I would be happy to pay you a few bears of cours Do you think you can make the rom as 'clean' as possible?
Thank you in advance!

HTC Sensation XL
I have installed this android but the sound disapears suddenly.i have put in normal mode but jus the vibration works.sound disapears in all part of sounds: music,clock alarm,ringone calls.what should i do? thanks
---------- Post added at 04:38 PM ---------- Previous post was at 04:29 PM ----------
What should i do about the disaperance of audio,thanks

[Rom][Port][Touch Os v2][Micromax Fire 2] By Raj

Touch Os v2 Rom For Micromax Canvas Fire A104
Ported By Me (Raj Shekhar)
Credits- @Sandeep5303
Features -
1. Super Smooth
2. No Lag found Anywhere
3. Stable and best Rom for gamers
4. Google Kayboard as Default
5. Two File Manager : Mi Explorer and Ex file explorer
6. Root explorer Added
7. Init.d and build.prop tweaks added
8. Nova Material Beta Pro is Default launcher
9. Very Beautiful Ui
10. Awesome Battery Backup
11. Material Walls
12. Fully Deodexed Rom
13. Better Ram Management
14. Google Apps working (Not Added in the Rom )
15. I forgot to make it Pre rooted ( Flash Root.zip By @vibhu0009 )
16. Rest Figure Out Ur self
How to Flash -
1. Reboot into Recovery
2. Wipe Data factory reset
3. Wipe cache partition
4. Wipe dalvik cache
5 .Flash the rom and root.zip
Downloads -
Touch Os v2 - Download
Root.zip - Download
Do Hit Thanks If u like My Work

Good JOB......

arun.negi004 said:
Good JOB......
Click to expand...
Click to collapse
Thanks bro

great work

Sandeep5303 said:
great work
Click to expand...
Click to collapse
Thanks Sandeep bro

nicework.

hi any body can help me '
---------- Post added at 06:42 PM ---------- Previous post was at 06:41 PM ----------
there is not "install from sd card" in my recovery menu what can i do ??

How to flash
I am totally nil in flashing, can you please guide me from start to end and softwareS required to install this rom my device.
As per your instruction I entered into recovering mode by pressing voulume up and power for 5 secinds, then wipe data/factory reset then cache partiotion and after that when i tried to apply update from sdcard its showing Installation abborted.
please help

Error 7
While flashing the Zip file, it says ERROR7: Some symlink error, could not flash file. I'm using TWRP recovery. Is there any solution for this?

Twrp recovery

[ROM] AOSP Nougat 7.1.2 | MoltenMotherBoard

Hi, I am sharing my Nougat ROM for LG-P880 with the XDA community. As a tribute to the original @MoltenMotherBoard, it will continue to be named as such.
AFH download:
https://www.androidfilehost.com/?w=files&flid=109853
ChangeLog
20180122
- Android-7.1.2_r36 (N2G48H)
- kernel
* Optimized kswapd based on kernel-msm/3.10/Bullhead
- Tuned extra_free_kbytes to 4 screen buffers
- Reduced I/O read_ahead_kb from 2048 to 256 for better latency
- Set dalvik.vm.dex2oat-thread = 2
Complete changelog
https://www.androidfilehost.com/?w=files&flid=109853
SELinux for Nougat
SELinux in Nougat has been hardened to never allow text relocation for executables. This is the only rule that we had to relax to enable pre-KitKat blobs to run.
To enable SELinux Enforcing, do this from recovery
Code:
$ adb shell mount /data
$ adb shell touch /data/.selinux
$ adb shell umount /data
Known issues
- MHL not working
- Display freeze on Cast Screen disconnect
- Widevine DRM not working
Broken AOSP components
- Clock
- Browser2
- Music
- Webview
Installation
You need to have custom recovery that can flash multiple zip files without having the reboot. I personally use the official CWM 6.0.4.5 so the instructions will be based on that with no external SD.
>Coming from other ROMs
- wipe userdata/cache
- format /system
- apply ROM zip
- apply Gapps zip ...or more Gapps if using modular Gapps
- format /data and /data/media
- reboot
>Coming from the same ROM
- format /cache
- format /system
- apply ROM zip
- apply Gapps zip ...or more Gapps if using modular Gapps
- reboot
Recommended Gapps is OpenGapps stock. Default webview provider is Google WebView. Please make sure your Gapps include this. Attached you will see my Gapps config.
This is based on Grouper blobs, so as usual barcode/QR scanning will not work and will not consider this as bug. However, Grouper blobs works with Screen Cast, which for me, is more useful than barcode/QR code scanning.
Let the testing begin!!!:fingers-crossed::fingers-crossed::fingers-crossed:

Kernel
Kernel https://github.com/CyanogenMod/lge-kernel-p880/tree/cm-12.1
See attached for patches
Code:
commit 413b3fc527c086450f28acbe92893c71e73ad5b6
Author: demetris <[email protected]>
Date: Wed Nov 4 00:39:13 2015 +0200
Use "git am -3" for .patch files
Use "git apply" for .diff files.

Reserved another

Different installation hmmm Thanks for everything csk1jw

Use TWRP 3.0.2.0 and do the recommend wipes .Have the zip files on a EX sdcard.
By flashing get messages "unknow command log" in red letters
Try to install open gapps for 7.0 beta pico and get errorcode 20 .Witch gapps can i use ?
Flash without gapps and get also the messages in red letters,but
boot normally and it seems working good fast and smooth :good:
Try copy the zip files for gapps to intern sd.In recovery can flash gapps and webview,
clean dalvik/cache , reboot but cant not open playstore
Regards

Can anyone provide me touch recovery for flashing this ROM.
Also need gapps for this ROM, I am unable to access some sites in my country (Kingdom Of Saudi Arabia).
Please provide me touch recovery for this ROM and link for Gapps.
Edit: Attached CWM Touch Recovery v6.0.4.5

Anyone up for helping me????

Salman Al-Badgail said:
Anyone up for helping me????
Click to expand...
Click to collapse
Here is a link for gapps 7.0 stock:
https://www.dropbox.com/s/r4uxxnqkfcxvc6c/open_gapps-arm-7.0-stock-20160910.zip?dl=0
Here is the latest twrp recovery. Please confirm that this is a touch recovery, if it is. I'm sticking with CWM 6.0.4.5. and don't wanna flash TWRP now.
https://www.dropbox.com/s/rq4xiya446h0mgo/twrp-3.0.2-0-p880.img?dl=0

Phil_Smith said:
Here is a link for gapps 7.0 stock:
https://www.dropbox.com/s/r4uxxnqkfcxvc6c/open_gapps-arm-7.0-stock-20160910.zip?dl=0
Here is the latest twrp recovery. Please confirm that this is a touch recovery, if it is. I'm sticking with CWM 6.0.4.5. and don't wanna flash TWRP now.
https://www.dropbox.com/s/rq4xiya446h0mgo/twrp-3.0.2-0-p880.img?dl=0
Click to expand...
Click to collapse
@Phil _Smith
I use TWRP 3.0.2.0 .How get you the stock gapps to work? I can flash,but googleservices is not working !!

sourly64 said:
@Phil _Smith
I use TWRP 3.0.2.0 .How get you the stock gapps to work? I can flash,but googleservices is not working !!
Click to expand...
Click to collapse
I suggest you try CWM 6.0.4.5.
I remember that there always had been some problems with TWRP and AOSP-based ROMs.
---------- Post added at 07:27 PM ---------- Previous post was at 06:41 PM ----------
Is there any chance to get the xposed framework to work on this rom? Or is there simply no version available for android 7.0?

Phil_Smith said:
I suggest you try CWM 6.0.4.5.
I remember that there always had been some problems with TWRP and AOSP-based ROMs.
---------- Post added at 07:27 PM ---------- Previous post was at 06:41 PM ----------
Is there any chance to get the xposed framework to work on this rom? Or is there simply no version available for android 7.0?
Click to expand...
Click to collapse
Please do provide me CWM 6.0.4.5.
Thanks

Salman Al-Badgail said:
Please do provide me CWM 6.0.4.5.
Thanks
Click to expand...
Click to collapse
Here you are, sir! Hope you got adb working, as I only found this as an .img
(For myself I use Rom Manager).
https://www.dropbox.com/s/7kpdaoobfizmlum/cwm_6.0.4.5.img?dl=0
Edit: Ah, but I remember that flashing .img files is easy via twrp (a little bit ironic)

Phil_Smith said:
Here you are, sir! Hope you got adb working, as I only found this as an .img
(For myself I use Rom Manager).
https://www.dropbox.com/s/7kpdaoobfizmlum/cwm_6.0.4.5.img?dl=0
Click to expand...
Click to collapse
Thanks for providing me, many sites are blocked by govt here this is only the reason I am troubling you. Sorry.
Adb is working fine. Thanks again @Phil_Smith
---------- Post added at 11:16 PM ---------- Previous post was at 11:11 PM ----------
I found CWM Touch Recovery (6.0.4.5) HERE

I attached CWM Touch 6.0.4.5 (please do check)
Edit: Attachment Not working

Salman Al-Badgail said:
Thanks for providing me, many sites are blocked by govt here this is only the reason I am troubling you. Sorry.
Adb is working fine. Thanks again @Phil_Smith
---------- Post added at 11:16 PM ---------- Previous post was at 11:11 PM ----------
I found CWM Touch Recovery (6.0.4.5) HERE
Click to expand...
Click to collapse
No problem, I know - I read your previous post

Bluetooth does not work for me. The device is detected properly, but then there is no sound playing from my external audio speaker. Can anyone comfirm the Bluetooth issue?

Phil_Smith said:
Bluetooth does not work for me. The device is detected properly, but then there is no sound playing from my external audio speaker. Can anyone comfirm the Bluetooth issue?
Click to expand...
Click to collapse
Confirmed. Will investigate. Device paired and connected but no sound.

It is too slow on my device

fukuli053 said:
It is too slow on my device
Click to expand...
Click to collapse
Give it a couple of shots (that is reboots). At first nothing worked for me eighter, but it gets stable and really fast after like 4 restarts or so!

fukuli053 said:
It is too slow on my device
Click to expand...
Click to collapse
Well, it can't be. Nougat UX is faster than Marshmallow.
What's your Gapps installation?

[ROM][4.4.4]DayDream for Huawei Y560-U02[port]

The ROM is based on cm11.
Copy to microSD card Cyanogenmod 11 ROM. Reboot to recovery (TWRP).
Wipe (without rm-rf): dalvik cache, data, cache. Flash Rom through TWRP. After flashing - factory reset.
Reboot system, setup sim cards. Check APN. If it is not written, write it yourself. Done.
Download:
https://drive.google.com/file/d/1j8wW4r-hb2OYcoNxMSqSJFeHbyxumAK3/view?usp=sharing
Open es file explorer , go to device/efs/imei/imeino1 and imeino2 , write your imei numbers. Calls and sms will works without this, but better to write your imei numbers.
Gapps:
http://opengapps.org/#downloadsection , recommended 4.4 pico
On your own risk.
Source:
https://4pda.ru/forum/index.php?showtopic=601981&view=findpost&p=64908598

this rom is good
but crashed google wizard after flashing gapps (and rom not work)
thanks to you bro
Do not be tired

Sorry for asking this.
but as far as I see, custom roms for y560-u02 have been ported from core33g.
there are newer lineage os roms out there for core33g, is it possible to port them for y560-u02?

Failure of the persist partition

TwRP does not want the persist partition, both automatically and manually. Please, send a copy of persist with xiaomi.eu. Earlier links that I found are out of date or in error in zip / rar.

SpiderSGS6 said:
TwRP does not want the persist partition, both automatically and manually. Please, send a copy of persist with xiaomi.eu. Earlier links that I found are out of date or in error in zip / rar.
Click to expand...
Click to collapse
I recently posted the solution for this issue on numerous threads
Download the required Dipper images Rom:
Fastboot Rom Link : dipper_global_images_9.6.27_20190627.0000.00_9.0_g lobal_30e0fc22ef.tgz
FYI Trivia: the release date of the firmware doesn't matter, If you use diff or Beyond Compare to analyse file differences you will find nothing different.
Unpack the fastboot rom, and manually extract the persist.img and then place it into the sd folder of your phone using recovery file manager.
Boot to TWRP
Go to advanced , then terminal
type: dd if = / sdcard / persist.img of = / dev / block / bootdevice / by-name / persist
After its finished reboot to system, finished
If that helped you click thanks instead of saying it.
if it doesn't work for you, there are several other ways to do this.
---------- Post added at 08:47 PM ---------- Previous post was at 08:35 PM ----------
SpiderSGS6 said:
TwRP does not want the persist partition, both automatically and manually. Please, send a copy of persist with xiaomi.eu. Earlier links that I found are out of date or in error in zip / rar.
Click to expand...
Click to collapse
Also
You should try using this version of TWRP, it does not have encryption issues.
https://drive.google.com/open?id=1NsbRBiloJ1CBKFZFYGbDP7d0oae5ATfu

The system works. Thanks a lot!

SpiderSGS6 said:
The system works. Thanks a lot!
Click to expand...
Click to collapse
Congrats, and you are welcome!

tsongming said:
I recently posted the solution for this issue on numerous threads
Download this Fastboot Rom : http://en.miui.com/download-346.html Download the Full Stable fastboot version and not the Recovery version.
FYI Trivia: the release date of the firmware doesn't matter, If you use diff or Beyond Compare to analyse file differences you will find nothing different.
Unpack the fastboot rom, and manually extract the persist.img and then place it into the sd folder of your phone using recovery file manager.
Boot to TWRP
Go to advanced , then terminal
type: dd if = / sdcard / persist.img of = / dev / block / bootdevice / by-name / persist
After its finished reboot to system, finished
If that helped you click thanks instead of saying it.
if it doesn't work for you, there are several other ways to do this.
---------- Post added at 08:47 PM ---------- Previous post was at 08:35 PM ----------
Also
You should try using this version of TWRP, it does not have encryption issues.
https://drive.google.com/open?id=1NsbRBiloJ1CBKFZFYGbDP7d0oae5ATfu
Click to expand...
Click to collapse
The ROM from this site is zip file and doesn't have a persist.img inside
can't see any other (fastboot) version there to download...

yarecco said:
The ROM from this site is zip file and doesn't have a persist.img inside
can't see any other (fastboot) version there to download...
Click to expand...
Click to collapse
Here I posted a photo of the rom unpacked. Note that the persist.image is there: https://forum.xda-developers.com/showpost.php?p=79814349&postcount=4
Basically you need the stable fastboot rom for your device ( Global or Chinese) It must be the fastboot rom and not the recovery rom.

tsongming said:
Here I posted a photo of the rom unpacked. Note that the persist.image is there: https://forum.xda-developers.com/showpost.php?p=79814349&postcount=4
Basically you need the stable fastboot rom for your device ( Global or Chinese) It must be the fastboot rom and not the recovery rom.
Click to expand...
Click to collapse
I know and I found that ROM but not from the link from the first post which does'nt contain any fastboot ROM.
You can find it here:
https://mirom.ezbox.idv.tw/en/phone/dipper/roms-global-stable/

yarecco said:
I know and I found that ROM but not from the link from the first post which does'nt contain any fastboot ROM.
You can find it here:
https://mirom.ezbox.idv.tw/en/phone/dipper/roms-global-stable/
Click to expand...
Click to collapse
Well the ROM was updated so the link now apparently goes to the newer build. At the end of the day any fastboot ROM with the built-in flashall.bat script will include all of the needed images.
Here is an additional site that includes multiple releases
https://xiaomifirmware.com/roms/download-official-miui-roms-for-xiaomi-mi8-dipper/
Sent from my Xiaomi MI 8 using XDA Labs

tsongming said:
I recently posted the solution for this issue on numerous threads
Download the required Dipper images Rom:
Fastboot Rom Link :
FYI Trivia: the release date of the firmware doesn't matter, If you use diff or Beyond Compare to analyse file differences you will find nothing different.
Unpack the fastboot rom, and manually extract the persist.img and then place it into the sd folder of your phone using recovery file manager.
Boot to TWRP
Go to advanced , then terminal
type: dd if = / sdcard / persist.img of = / dev / block / bootdevice / by-name / persist
After its finished reboot to system, finished
If that helped you click thanks instead of saying it.
if it doesn't work for you, there are several other ways to do this.
---------- Post added at 08:47 PM ---------- Previous post was at 08:35 PM ----------
Also
You should try using this version of TWRP, it does not have encryption issues.
Click to expand...
Click to collapse
What version?, your link doesn't work

Leoleo96 said:
What version?, your link doesn't work
Click to expand...
Click to collapse
The Q version if using Q and vice versa.
The links work, just fine. It's my account on AFH. ( See screenshot)
You may have to wait a few seconds for the source link to open. I checked it just now, obviously and it immediately loaded.

tsongming said:
The Q version if using Q and vice versa.
The links work, just fine. It's my account on AFH. ( See screenshot)
You may have to wait a few seconds for the source link to open. I checked it just now, obviously and it immediately loaded.
Click to expand...
Click to collapse
Regarding the fastboot rom, the link works. Also it's on the official site. People can't be bothered to click thanks but want direct links. Nope sorry.

tsongming said:
The Q version if using Q and vice versa.
The links work, just fine. It's my account on AFH. ( See screenshot)
You may have to wait a few seconds for the source link to open. I checked it just now, obviously and it immediately loaded.
Click to expand...
Click to collapse
Google drive link of your twrp still not work for me..
I use twrp-3.3.1-1-dipper but i think It doesnt work...
I should sede some files in persist folder right? (I cant see anything with twrp folder navigation)
I aso try ti flash by fastboot command but It says that i can't flash that partition (and more now phone Is frp Google locked because i cant log of i have no connection )

tsongming said:
Regarding the fastboot rom, the link works. Also it's on the official site. People can't be bothered to click thanks but want direct links. Nope sorry.
Click to expand...
Click to collapse
Here is a hint: it's a fastboot rom on the official site. You must use a desktop to download.
You can find direct links on the OP of the Xiaomi.eu thread, here on XDA it's on the OP.
---------- Post added at 09:46 PM ---------- Previous post was at 09:43 PM ----------
Leoleo96 said:
Google drive link of your twrp still not work for me..
I use twrp-3.3.1-1-dipper but i think It doesnt work...
I should are some files in persist folder right? (I cant sede anything with twrp folder navigation)
I aso try ti flash by fastboot command but It says that i can't flash that partition (and more now phone Is frp Google locked )
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=4349826312261636232
---------- Post added at 09:48 PM ---------- Previous post was at 09:46 PM ----------
tsongming said:
Here is a hint: it's a fastboot rom on the official site. You must use a desktop to download.
You can find direct links on the OP of the Xiaomi.eu thread, here on XDA it's on the OP.
---------- Post added at 09:46 PM ---------- Previous post was at 09:43 PM ----------
https://androidfilehost.com/?fid=4349826312261636232
Click to expand...
Click to collapse
Okay, give a few minutes, and I will be back with you. When I get back home

@ Leoleo96
Okay, I just made an All in One thread with all possible Persist solutions and links checked : https://forum.xda-developers.com/mi-8/help/one-repair-persist-issues-t4036919

Thank you so much tomorrow i try