Related
First up - Let me say that the complete credit to the method goes to two members here as in the thread https://forum.xda-developers.com/galaxy-tab/help/galaxy-tab-active-2-forum-question-t3712591
BUT BUT BUT what the two experts have missed out is on explaining a clear step by step guide for a complete noob like me . So this is an attempt to explain every step. My tab had root in less than 10 mins .
why i needed the root ?
16gb is not enough for the tab so i wanted to apps and data to be moved to the sd card .
Here are the steps
On the Pc
1. Download the stock firmware (must be the same as in your tab) from samfirmware or any other source.
2. Extract the firmware and the extract archive called AP... . Once extracted you will have a boot.img file in it.
On the TAB
3. Activate developer options by clicking the software version 5 times.
4. In the developer options check OEM unlock and USB debugging
5. Download Magisk Manager v16 from xda and install on the TAB.
Connect the tab to the pc
6. Copy the boot.img file from pc to the tab.
7. Run Magisk Manager and in settings choose the output format as odin compatible tar,
8. Click the INSTALL button in the MAGISK manager and choose 'patch boot image file'
9. After a few minutes a dark screen will appear will read all ok boot image patched...now copy that patched_boot.img.tar file from the tab to the PC and rename it as boot.img.tar
On the Tab
10. Recheck under developer options if check OEM UNLOCK and USB DEBUGG
11. DELETE the GOOGLE account (crucial)
12. Switch of the tab
13. Go to download mode by holding vol down, menu and power together , once asked press vol up to go to the download mode.
14. Connect tab to PC.
On the PC
15. Download ODIN and once downloaded right click and run as administrator.
16. Choose AP and select the previously patched boot.img.tar file.
17. Click START
On the TAB
18. It will run the download and restart , restart will say "VERIFICATION FAILED and aask to RESET and erase .
19. CLICK RESET
20. wait for reset saying ERASING and let the tab restart.
NOW the next step is the most crucial one and it is where i got stuck as none of the members who have rooted their device mention it. I did all of the above procedures repeatedly and failed to get root until i realized there was one FINAL CRUCIAL STEP before enjoying the root.
LAST STEP
ON THE TAB
After the TAB restarts , fill in the initial details (google , samsung account, wifi etc) and before you do anything else INSTALL THE MAGISK MANAGER V16 app you downloaded from XDA .......thats it ....you have root access now . ENJOY!
How did you install Magisk?
When I open Magisk Manager v5.6.4, I get a "Magisk is not installed" and I only have the settings option.
No "install" options.
I have the same tablet. don't know of any twrp that can work with it, therefore leaving me with Magisk Manager only.
Id' be glad to get some help
Thanks,
SOLVED: You must have a functioning network interface in order for the "install" button to appear and you need internet connection to "install the v16 zip".
Magisk is OpenSource though, right? so probably it can be changed to allow offline installation as well.
Rooteed
Well Crap...I just got my Nice, New, Sparkleing Tab Active2 and cant root it yet. I have the New US version SM-T397U Unlocked model. cant find a Stock firmware on Sammobile as of yet...any ideas?
EDIT: Neeeevermind... I did a lil hacking and cracking (for about 26min, lol) to find the files I needed for the SM-T397U. If anyone is looking for em let me know and I'll shoot em' your way. Guessing I'm the first person to root a T397U, hope more will follow. I havent even had this thing 6 hours yet. Thanks for the write up and all those that contributed to the tools and info!
I followed every steps till the end and everything went smoothly. But once I rebooted the tablet, I got the red label on the top left corner: "custom binary blocked by OEM lock". The tablet won't boot properly anymore "OEM unlock" was enabled in the Developers options, I double checked to be sure before flashing.
Edit:
Actually, the "custom binary blocked by OEM lock" appears as soon as I modify the system partition (I wanted to modify the Generic.kl in the keylayout folder on the system partition). If you do not touch anything, everything is fine.
[X-POST from here ]
Worked perfectly, Thank you very much!
WARNING: THIS WILL WIPE EVERYTHING ON YOUR TABLET.
Backup all of your important files before you flash the patched boot.img using odin.
I tried to backup my app data using samsung switch and it worked, but didn't restore most of my device settings and all of my app data.
(Good thing I kept backups for my important apps that had in app backup functionality - like Nova launcher and Squid)
Keep in mind that you probably won't be able to get OTA updates after you perform these steps, it doesn't matter though since this tablet isn't going to be updated that frequently (The 8.0 update is going to come at the end of 2018, source)
Hello.
I tried this but when i using the magisk manager i have an error meassage and the following log:
- Copying image to cache
- Device platform: armeabi-v7a
- Existing zip found
1038+1 records in
1038+1 records out
1063528 bytes transferred in 0.022 secs (48342181 bytes/sec)
- Unpacking boot image
MagiskBoot v18.1(18100) (by topjohnwu)
- Boot Image Modification Tool
mmap failed with 12: Out of memory
! Unable to unpack boot image
! Installation failed
Can you help what i did wrong?
Thank you
oem unlock does not appear
SOLUTION FOUND
how do you oem unlock
I have wasted hours on this, waited weeks, tried the date trick with a legit setup, but the oem unlock never appears, running oldest version of firmware 7.1.1 feb 2018, what gives?
Tried reinstalling firmware via odin, successful flash but no factory reset. Suspect this made no difference. Got the security fail on PIT error, needed a new version of odin and selecting individual AP etc. files fixed this.
apparently you need a samsung or google account
So trying a samsung account... no dice
Now trying adding a sim card as well... success
OK after months of waiting and trying things, this just worked!
Update- I lost the date trick, have to wait 7 days after step 7 on auto date, just appears in developer options no need to press manual update.
https://forum.xda-developers.com/galaxy-s8+/how-to/guide-how-to-skip-rmm-prenormal-install-t3749468
- try downloading UK rom which was released before december '17 (october)
See if it lets the below process work again?
0/ install sim card (was not even the original carrier one in my case although my phone is not carrier locked)
1/ factory reset
2/ on reboot skip all accounts, do not enter a name do not turn on wifi, accept minimal amounts of things
3/ set date to 1/4/19 - turn off automatic date
4/ turn off automatic software updates
5/ enable developer options and turn off auto update system
6/ turn on wifi (date changes)
6b/ change date back
7/ Install samsung account (I went to samsung cloud) (date not changed but software update now triggered despite not touching manual update)
8/ (for interest look at manually check for software updates - it already says 1/4/19 last checked)
9/ reboot
10/ (date is now changed back to today again without my permission)
11/ (it pops up asking to install an update, despite auto updates turned off. - LATER)
12/ (last checked software date is now today (because I left wifi on I think through a reboot) this is 4/5/19 over 1 month later)
13/ go to developer options for the 27868745# time
OEM UNLOCK APPEARED HOLY ****
It is between Bluetooth HCI snoop log and Running services on the dev page, top of the developer options
Since the RMM prenormal thing triggered I had to do this again, so the above instructions do work.
If you stuff up the date just factory reset and start again. Reflash not required
I used a brand new throwaway samsung account for this but thats possibly up to you.
RMM state prenormal
OK now that I've jumped through hoops, installed TWRP
I go to reboot and it's locked recovery again - repeat above OEM unlock reappearing act steps fixes RMM=prenormal. Now it's official again.
Apparently you need to install an RMM patch as well which is not mentioned in this thread.
https://forum.xda-developers.com/showpost.php?p=75360965&postcount=22
So, odin -> ap -> TWRP download
quickly press power-up-home when it resets!!!
recovery is not seandroid enforcing appears and TWRP starts.
1. back up all partitions to microsd!
2. install
a TWRP -> magisk
b TWRP -> RMM disabler - this writes to /system defeating the purpose of magisk???
wipe cache/dalvik reboot
on boot:
"Verification failed"
"Unable to restart your device the integrity verification has failed.... erase all your data"
Well recovery boots this time not an RMM error thats nice... oh it runs a few commands and automatically restarts again.
"Verification failed..."
I guess that is a boot loop then, thanks TWRP for not stopping at a menu ffs.
Reflash TWRP with odin, now it halts at TWRP menu.
https://forum.xda-developers.com/ga...t/how-to-recover-verification-failed-t3775722
Apparently I should put in download mode and cancel - Result = fail & TWRP bootloop -> reinstall TWRP
unmountable /data partition - yep thats me - could try format to exfat - ext4 - Result = Verification failed ffs
---------- Post added at 01:52 PM ---------- Previous post was at 01:00 PM ----------
Take 3
"Looks like you didnt flash encryption breaker." no-verity-no-encrypt_ashyx.zip or no-verity-opt-encrypt-6.0 zip well duh of course but which one for t395
https://www.androidinfotech.com/no-verity-opt-encrypt-versions/
seems a few up to 6.0
BTW if you don't press reset and instead try and reboot into recovery you don't have to reflash TWRP
Verification FAIL.
https://forum.xda-developers.com/galaxy-note-8/how-to/guide-how-to-root-device-encryption-t3742493
Take 4 - try reinstating boot.img with no mods.
Try flashing stock AP -> twrp -> DMM fix -> magisk in quick succession & booting tablet
Verification Failed! Reset
Goes to recovery - less errors on TWRP (no mount errors like before) but verification failed again.
Because TWRP is installed I don't get the erasing screen as described by OP....? TWRP does something very quickly I think it says formatting cache, it is doing a standard factory reset. Trying manual factory reset with TWRP does not work.
So I think I need TWRP to prevent DMM tripping and install magisk but I need stock recovery to avoid the verification failing constantly.
Or a new version of TWRP that supports encryption? 3230+ I have 3230...?
Try Stock RO system - twrp - dm verity - magisk
Verification failed. Reset - no dmm error thats nice. TWRP did some extra stuff.
Verification failed again.
#&%^&^#%$#[email protected]#%[email protected]#%#$%
Option 556
Install dmverity patch using stock recovery.
Gives error can't find /misc partition - pretty sure these are TWRP zips only.
Magisk website says install TWRP so I can't see how to avoid TWRP and this annoying verification fail. Maybe try an older version of magisk???
Verification bootloop FIX:?
I tried booting stock, it says something like data corrupt on start, looks the same as the verification failed but with the different message. I let it erase/factory reset with stock recovery.
DMM preload did not trigger on this!
As soon as it succeeded I installed TWRP in case DMM triggers.
Now with fixed data partition (presumably) retry TWRP
1. no verity patch (6.0)
2. magisk
cannot install DMM as it alters system partition...?
No cache wipe.
Lets see what happens...... Black screen but this time
'encryption failed' reset. Press reset.... TWRP does a factory reset
'encryption failed'
LOL now I have an encryption failed bootloop.
Reinstall stock and use stock factory reset again - boot to recovery straight away, wipe data & cache
Now install TWRP (not booted once yet)
Install verity patch 6.0
install magisk 19.1
Boot system for the first time. - got a bootloop? no just taking it's sweet time. Fingers crossed!
Android is starting... WELCOME
HOLY **** IT WORKED
DMM patch not installed and it hasn't tripped DMM yet (the old 7 day wait issue)
SUMMARY:
1/ ensure DMM is official and not preload, OEM unlocked etc with above post steps
2/ flash stock AP - do NOT boot system yet
3/ stock recovery - wipe data and cache
4/ download odin mode - install twrp-3.2.3.0-gtactive2lte-7.1.2.tar
5/ twrp - install no-verity-opt-encrypt-6.0.zip
6/ twrp - install magisk 19.1
7/ Boot system for the first time
So I have not installed RMM patch (system untouched) but I did install the no encryption/dm verity patch.
It actually boots now.... will update if further problems
Interestingly OEM unlock has disappeared, so RMM must be prenormal so it will probably die on reboot. Argh. But everything is restoring OK for now. See what happens...
Magisk app auto installed and passes safetynet. Preserve force enctyption and AVB 2.0/dm-verity unchecked.
Annoyingly despite backing up all my messages to samsung they are not restoring past 20 april. Not the end of the world.
Skype keeps stopping.
Reboot and YES only officially released binaries are allowed to be flashed boot loop.
So lets do this again!
SUMMARY:
1/ ensure DMM is official and not preload, OEM unlocked etc with above post steps
8skip 2/ flash stock AP - do NOT boot system yet
8skip 3/ stock recovery - wipe data and cache
4/ download odin mode - install twrp-3.2.3.0-gtactive2lte-7.1.2.tar
5/ twrp - install no-verity-opt-encrypt-6.0.zip
6/ twrp - install magisk 19.1
7/ Boot system for the second time
Pretty sure I already tried this so it won't work. &^%#@&^$#$#%#$%@##%@
Oh great it has managed to install the update and now the date fix doesn't work. &^#%&^#$#@$%@#$
After waiting 7 days
1/ Use stock recovery factory reset, then immediately hold down-home-power download mode
2/ Odin TWRP, then immediately hold up-home-power to enter TWRP
2a/ TWRP swipe to allow modifications (for RMM patch)
3/ TWRP install RMM patch
4/ TWRP install no verity patch
5/ TWRP install latest Magisk
NB Magisk seems to install itself as an app - its just there.
...Safetynet pass despite RMM editing /system phew
Hello,
With the last version of Magisk, we no longer have the setting to choose the output format as odin compatible tar.
How can we deal with this, please ?
Regards,
Driss35 said:
Hello,
With the last version of Magisk, we no longer have the setting to choose the output format as odin compatible tar.
How can we deal with this, please ?
Regards,
Click to expand...
Click to collapse
You don't have to choose any file type. Magisk scans files automatically.
Also, if your file type is ".lz4", you have to change it to ".img". Unless, you can't continue.
@Drnms thanks for this thread. But, some places have to be updated because of new Magisk versions.
Did App data remain after rooting
Drnms said:
First up - Let me say that the complete credit to the method goes to two members here as in the thread https://forum.xda-developers.com/galaxy-tab/help/galaxy-tab-active-2-forum-question-t3712591
BUT BUT BUT what the two experts have missed out is on explaining a clear step by step guide for a complete noob like me . So this is an attempt to explain every step. My tab had root in less than 10 mins .
why i needed the root ?
16gb is not enough for the tab so i wanted to apps and data to be moved to the sd card .
Here are the steps
On the Pc
1. Download the stock firmware (must be the same as in your tab) from samfirmware or any other source.
2. Extract the firmware and the extract archive called AP... . Once extracted you will have a boot.img file in it.
On the TAB
3. Activate developer options by clicking the software version 5 times.
4. In the developer options check OEM unlock and USB debugging
5. Download Magisk Manager v16 from xda and install on the TAB.
Connect the tab to the pc
6. Copy the boot.img file from pc to the tab.
7. Run Magisk Manager and in settings choose the output format as odin compatible tar,
8. Click the INSTALL button in the MAGISK manager and choose 'patch boot image file'
9. After a few minutes a dark screen will appear will read all ok boot image patched...now copy that patched_boot.img.tar file from the tab to the PC and rename it as boot.img.tar
On the Tab
10. Recheck under developer options if check OEM UNLOCK and USB DEBUGG
11. DELETE the GOOGLE account (crucial)
12. Switch of the tab
13. Go to download mode by holding vol down, menu and power together , once asked press vol up to go to the download mode.
14. Connect tab to PC.
On the PC
15. Download ODIN and once downloaded right click and run as administrator.
16. Choose AP and select the previously patched boot.img.tar file.
17. Click START
On the TAB
18. It will run the download and restart , restart will say "VERIFICATION FAILED and aask to RESET and erase .
19. CLICK RESET
20. wait for reset saying ERASING and let the tab restart.
NOW the next step is the most crucial one and it is where i got stuck as none of the members who have rooted their device mention it. I did all of the above procedures repeatedly and failed to get root until i realized there was one FINAL CRUCIAL STEP before enjoying the root.
LAST STEP
ON THE TAB
After the TAB restarts , fill in the initial details (google , samsung account, wifi etc) and before you do anything else INSTALL THE MAGISK MANAGER V16 app you downloaded from XDA .......thats it ....you have root access now . ENJOY!
Click to expand...
Click to collapse
Hi Dmms,
Please confirm if the data remained (i.e. was not erased) after the rooting?
Thanks in advance.
Hi, in case it is still relevant:
- Tab does a factory reset when booting first time after the boot img is flashed, data on the device is lost. Data on the SD card is not affected
- In my case, flashing boot.img with Odin didn't work. Odin said success, but no root. Heimdall worked fine, tab was rooted at first attempt
Does this guide also work for Android 9 ?
Edit: So it works with Android 9 also but I had to unpack the boot.img with 7zip ZS according to this post https://forum.xda-developers.com/t/samsung-a40-how-to-root.3929496/post-79902328
and re-pack it with normal 7zip according to these steps:
Do you have the boot.img.lz4 file to boot.img unpacked?
You have renamed the magisk_patched.img to boot.img?
You used the normal 7zip to package into a .tar file? Not the 7zZs?
You used the normal Odin 3.14?
Hello, did you manage to remove the "format as internal" lock?
Hi guys,
Trying to root this tablet, when I load the patched magisk file in Odin and perform the download. The tablet restarts and loads like normal but the tablet isn't rooted.
Any ideas?
alguma fortma?
First there are shortcuts for this, but I wanted to be sure I covered every step and where one is at each point, since it can be helpful for recovery or simply to see where one is. There are of course other ways but I just went through on a GM1917 and verified each of these steps, so that others do not need to piece together multiple threads. I'm assuming here we want to start from scratch, never a bad idea if you are willing to lose data, or else you have no choice and need to start from scratch.
Posts used:
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585
https://forum.xda-developers.com/oneplus-7-pro/development/recovery-unofficial-twrp-recovery-t3931322
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
I'm going to disable Encryption as well, because when written TWRP was not decrypting it and also because I find it a pain and simply put I do not need it on my phone, but those steps are optionally shown below, as well as root.
Next I'm doing this using files for the GM1917 (US/Internaltional), but you can replace both the fastboot version and the OTA for your device and the current version.
Before you begin: I'm assuming an unlocked boot loader
Be warned the steps below result in total loss of all DATA on the phone
Time: This takes about 45 minutes to an hour to complete.
I'm assuming you can get to fastboot mode, beyond that your phone can be seriously messed up, but as we are starting from scratch it should be ok.
Boot into Fastboot mode: (Vol- & Vol+ & power)
Use: 9.5.3-GM21AA-OnePlus7ProOxygen_21.O.07_OTA_007_all_1905120542_aa37bad-FASTBOOT to restore a prestine copy of 9.5.3 to slot A (only writes slot A)
Force it to power off on reboot (Vol+ & Power)
Reboot to fastboot mode (vol- & vol+ & power)
Now you should check which slot are you using with this command "fastboot getvar current-slot"
Now you should change the slot in use with this command "fastboot --set-active=*" you should replace with the slot is not in use, for example if you are using slot a the command will be "fastboot --set-active=b"
Now you should flash the twrp in the boot partion using this command "fastboot flash boot twrp.img"
Now reboot the device with in recovery mode scrolling the menu with the volume button and selecting "Recovery Mode" with the power button
Now we have TWRP on Slot B and 9.5.3 on Slot A we are on Slot B
If asked to decrypt, if not skip this step: Format Data, Then Internal Storage, Data and cache
Upload the 9.5.4 OTA Image: adb push OnePlus7ProOxygen_21.O.08_OTA_008_all_1905230032_1ef7fd0dc3.zip /cache
Upload the twrp image: adb.exe push test-twrp-3.3.1-2-guacamole.img /cache
Now Install 9.5.4: using TWRP to slot B
- Install -> /cache -> OnePlus7ProOxygen_21.O.08_OTA_008_all_1905230032_1ef7fd0dc3.zip
Go in advanced menu
Click on "Install Recovery Ramdisk"
Choose the recoveryimgfilename.img
Swipe to install
Reboot -> Select Slot A
Reboot Select Recovery
We now have TWRP on slots A and B. 9.5.3 on Slot A and 9.5.4 on Slot B
Back in TWRP we are now on Slot A:
Upload the 9.5.4 OTA Image: adb push OnePlus7ProOxygen_21.O.08_OTA_008_all_1905230032_1ef7fd0dc3.zip /cache
Upload the twrp image: adb.exe push test-twrp-3.3.1-2-guacamole.img /cache
Now Install 9.5.4: using TWRP to slot B
- Install -> /cache -> OnePlus7ProOxygen_21.O.08_OTA_008_all_1905230032_1ef7fd0dc3.zip
Go in advanced menu
Click on "Install Recovery Ramdisk"
Choose the recoveryimgfilename.img
Swipe to install
We now have TWRP on slots A and B. 9.5.4 Slots A and B
At this point you can boot up 9.5.4 Stock from Slot A by selecting Reboot System or we can root / disable encryption
To disable encryption (suggested if you do not care as it makes TWRP easier):
Optional: block the ROM from encrypting storage as we can not currently decrypt.
upload the zip: adb push Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip /cache
- Install -> /cache -> Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip
Note: this only affects the current slot (A in this case) which is fine
Reboot->System
At this point you have 9.5.4 Stock without Encryption on Slot A, With Encryption (and unused) on Slot B, and TWRP on Slots A and B.
Complete inital setup (I do the minimal at this point)
- Set a password, to verify if Dm-Verity_ForceEncrypt is working or not
Enable Developers Options
Enable Advanced Reboot in Developers Options
Note: My suggestion is to now power off and restart to ensure you have Wifi, as this is picky for some reason, and it is best to be sure.
Power -> Off
Power back on and verify that Wifi is still working, it should be.
If you want root:
Power -> Recovery
Upload Magisk: adb push Magisk-v19.2.zip /cache
- Install -> /cache -> Magisk-v19.2.zip
Wipe Dalvik
Reboot System
Finally: Verify that Safenet is passing in Magisk, it should be
You have 9.5.4 Stock with Encryption and Root on Slot A, With Encryption (and unused) on Slot B, and TWRP on Slots A and B. I hope having this in one place can help others, as I've tried to lay out exactly what I did each step of the way.
Parting suggestion: Maybe a good time to create a backup, one with EFS and Modem to just to be safe!
ERIC
I would love to leave this device permanently decrypted as well for convenience, but I do want lockscreen security enabled.
On the 6T, if you flash the dm_verity disabler zip, the drawback is that you couldn't enable lockscreen security. You could set a PIN, but the system would never recognize it, even if it was entered correctly. So once your screen went off, you had to either format internal storage from recovery to boot into a no-lockscreen system, or use file manager in TWRP to manually delete the files to disable lockscreen.
I'm thinking that 7Pro is the same way. Can someone confirm?
Thanks
reaper000 said:
I would love to leave this device permanently decrypted as well for convenience, but I do want lockscreen security enabled.
On the 6T, if you flash the dm_verity disabler zip, the drawback is that you couldn't enable lockscreen security. You could set a PIN, but the system would never recognize it, even if it was entered correctly. So once your screen went off, you had to either format internal storage from recovery to boot into a no-lockscreen system, or use file manager in TWRP to manually delete the files to disable lockscreen.
I'm thinking that 7Pro is the same way. Can someone confirm?
Thanks
Click to expand...
Click to collapse
I'm using A pattern, and fingerprint without issues. on 9.5.3 and 9.5.4.
ERIC
trying to use this guide and getting fastboot: unrecognised option `--set-active=b'
reaper000 said:
I would love to leave this device permanently decrypted as well for convenience, but I do want lockscreen security enabled.
On the 6T, if you flash the dm_verity disabler zip, the drawback is that you couldn't enable lockscreen security. You could set a PIN, but the system would never recognize it, even if it was entered correctly. So once your screen went off, you had to either format internal storage from recovery to boot into a no-lockscreen system, or use file manager in TWRP to manually delete the files to disable lockscreen.
I'm thinking that 7Pro is the same way. Can someone confirm?
Thanks
Click to expand...
Click to collapse
I saw o xXx Telegram that you can decrypt 7 Pro and also have lock screen security...
I too can confirm working lockscreen while remaining decrypted. Much appreciation to the OP!
Though I took a few shortcuts and used an otg USB drive, it still worked. Here's what I did:
(keep in mind that I am on 9.5.3, already had an unlocked bootloader, and had already used a patched boot.img that I injected via fastboot to achieve root)
To decrypt:
- downloaded dm_verity disable zip, magisk 19.2, and TWRP installer zip, and copied them to USB drive. Also, backup internal storage.
- used Magisk manager app to flash TWRP installer and Magisk 19.2
- reboot to recovery
- formatted internal storage (type yes, completely formatted the data partition and lost all media, photos, downloads, etc)
- twrp factory reset
- flashed dm-verity disabler zip and magisk 19.2 from otg USB drive
- reboot to system
Complete initial setup, repopulate internal storage with mefia (mp3, downloads, etc) from backup.
To upgrade to 9.5.4 once decrypted:
- download full 9.5.4 zip
- reboot to TWRP
- flash 9.5.4 zip and TWRP installer
- reboot to TWRP
- flash dm_verity disable zip and Magisk
- wipe dalvik
- reboot to system
Life is so much better decrypted.
earthbend said:
trying to use this guide and getting fastboot: unrecognised option `--set-active=b'
Click to expand...
Click to collapse
Need a newer version of fastboot this that case.
reaper000 said:
I too can confirm working lockscreen while remaining decrypted. Much appreciation to the OP!
Though I took a few shortcuts and used an otg USB drive, it still worked. Here's what I did:
(keep in mind that I am on 9.5.3, already had an unlocked bootloader, and had already used a patched boot.img that I injected via fastboot to achieve root)
To decrypt:
- downloaded dm_verity disable zip, magisk 19.2, and TWRP installer zip, and copied them to USB drive. Also, backup internal storage.
- used Magisk manager app to flash TWRP installer and Magisk 19.2
- reboot to recovery
- formatted internal storage (type yes, completely formatted the data partition and lost all media, photos, downloads, etc)
- twrp factory reset
- flashed dm-verity disabler zip and magisk 19.2 from otg USB drive
- reboot to system
Complete initial setup, repopulate internal storage with mefia (mp3, downloads, etc) from backup.
To upgrade to 9.5.4 once decrypted:
- download full 9.5.4 zip
- reboot to TWRP
- flash 9.5.4 zip and TWRP installer
- reboot to TWRP
- flash dm_verity disable zip and Magisk
- wipe dalvik
- reboot to system
Life is so much better decrypted.
Click to expand...
Click to collapse
I have tried your steps, but failed to decrypt the data partition.
I also tried different ways to flash:
* Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip then Magisk-v19.3.zip
* Magisk-v19.3.zip then Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip
* Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip then Magisk-v19.3.zip then Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip
but all failed.
My 1+7 Pro is GM1910.
Decryption is quite easy on my OnePlus 5T. Could you help me with some hint?
tinyfish said:
I have tried your steps, but failed to decrypt the data partition.
I also tried different ways to flash:
* Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip then Magisk-v19.3.zip
* Magisk-v19.3.zip then Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip
* Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip then Magisk-v19.3.zip then Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip
but all failed.
My 1+7 Pro is GM1910.
Decryption is quite easy on my OnePlus 5T. Could you help me with some hint?
Click to expand...
Click to collapse
I suppose "decrypt" is actually a misnomer.
The more accurate description is "disable forced encryption on initial and subsequent boots".
You aren't actually decrypting your current data partition, you're preventing a BLANK data partition from being encrypted upon initial boot of a virgin operating system.
The reason I'm saying all this is the most common reason for the no_verity disable zip to fail is because users have not done a factory reset AND not formatted their internal storage (you have to type the word "yes" or you haven't done it) before flashing no_verity and magisk.
Also ensure your no_verity disabler zip wasn't a bad download (md5 checksum)
If this doesn't work, then you're left with what I've termed a "scorched earth format" (you select everything except usb drive to wipe in advanced wipe, and then format internal storage with a typed yes). You then install FROM A USB DRIVE the latest full ota zip + twrp on both slots with the appropriate twrp reboots, then magisk + no_verity, twrp reboot then magisk yet again and finally system reboot.
reaper000 said:
I suppose "decrypt" is actually a misnomer.
The more accurate description is "disable forced encryption on initial and subsequent boots".
You aren't actually decrypting your current data partition, you're preventing a BLANK data partition from being encrypted upon initial boot of a virgin operating system.
The reason I'm saying all this is the most common reason for the no_verity disable zip to fail is because users have not done a factory reset AND not formatted their internal storage (you have to type the word "yes" or you haven't done it) before flashing no_verity and magisk.
Also ensure your no_verity disabler zip wasn't a bad download (md5 checksum)
If this doesn't work, then you're left with what I've termed a "scorched earth format" (you select everything except usb drive to wipe in advanced wipe, and then format internal storage with a typed yes). You then install FROM A USB DRIVE the latest full ota zip + twrp on both slots with the appropriate twrp reboots, then magisk + no_verity, twrp reboot then magisk yet again and finally system reboot.
Click to expand...
Click to collapse
I have formatted the data partition, and the Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip is valid.
Anyway I succeeded after upgrade to latest H2OS 9.5.5, with the same steps.
Thanks for your help.
Time-Saver!
QUOTE=egandt;79606005]First there are shortcuts for this, but I wanted to be sure I covered every step and where one is at each point, since it can be helpful for recovery or simply to see where one is. There are of course other ways but I just went through on a GM1917 and verified each of these steps, so that others do not need to piece together multiple threads. I'm assuming here we want to start from scratch, never a bad idea if you are willing to lose data, or else you have no choice and need to start from scratch.
Posts used:
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585
https://forum.xda-developers.com/oneplus-7-pro/development/recovery-unofficial-twrp-recovery-t3931322
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
I'm going to disable Encryption as well, because when written TWRP was not decrypting it and also because I find it a pain and simply put I do not need it on my phone, but those steps are optionally shown below, as well as root.
Next I'm doing this using files for the GM1917 (US/Internaltional), but you can replace both the fastboot version and the OTA for your device and the current version.
Before you begin: I'm assuming an unlocked boot loader
Be warned the steps below result in total loss of all DATA on the phone
Time: This takes about 45 minutes to an hour to complete.
I'm assuming you can get to fastboot mode, beyond that your phone can be seriously messed up, but as we are starting from scratch it should be ok.
Boot into Fastboot mode: (Vol- & Vol+ & power)
Use: 9.5.3-GM21AA-OnePlus7ProOxygen_21.O.07_OTA_007_all_1905120542_aa37bad-FASTBOOT to restore a prestine copy of 9.5.3 to slot A (only writes slot A)
Force it to power off on reboot (Vol+ & Power)
Reboot to fastboot mode (vol- & vol+ & power)
Now you should check which slot are you using with this command "fastboot getvar current-slot"
Now you should change the slot in use with this command "fastboot --set-active=*" you should replace with the slot is not in use, for example if you are using slot a the command will be "fastboot --set-active=b"
Now you should flash the twrp in the boot partion using this command "fastboot flash boot twrp.img"
Now reboot the device with in recovery mode scrolling the menu with the volume button and selecting "Recovery Mode" with the power button
Now we have TWRP on Slot B and 9.5.3 on Slot A we are on Slot B
If asked to decrypt, if not skip this step: Format Data, Then Internal Storage, Data and cache
Upload the 9.5.4 OTA Image: adb push OnePlus7ProOxygen_21.O.08_OTA_008_all_1905230032_1ef7fd0dc3.zip /cache
Upload the twrp image: adb.exe push test-twrp-3.3.1-2-guacamole.img /cache
Now Install 9.5.4: using TWRP to slot B
- Install -> /cache -> OnePlus7ProOxygen_21.O.08_OTA_008_all_1905230032_1ef7fd0dc3.zip
Go in advanced menu
Click on "Install Recovery Ramdisk"
Choose the recoveryimgfilename.img
Swipe to install
Reboot -> Select Slot A
Reboot Select Recovery
We now have TWRP on slots A and B. 9.5.3 on Slot A and 9.5.4 on Slot B
Back in TWRP we are now on Slot A:
Upload the 9.5.4 OTA Image: adb push OnePlus7ProOxygen_21.O.08_OTA_008_all_1905230032_1ef7fd0dc3.zip /cache
Upload the twrp image: adb.exe push test-twrp-3.3.1-2-guacamole.img /cache
Now Install 9.5.4: using TWRP to slot B
- Install -> /cache -> OnePlus7ProOxygen_21.O.08_OTA_008_all_1905230032_1ef7fd0dc3.zip
Go in advanced menu
Click on "Install Recovery Ramdisk"
Choose the recoveryimgfilename.img
Swipe to install
We now have TWRP on slots A and B. 9.5.4 Slots A and B
At this point you can boot up 9.5.4 Stock from Slot A by selecting Reboot System or we can root / disable encryption
To disable encryption (suggested if you do not care as it makes TWRP easier):
Optional: block the ROM from encrypting storage as we can not currently decrypt.
upload the zip: adb push Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip /cache
- Install -> /cache -> Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip
Note: this only affects the current slot (A in this case) which is fine
Reboot->System
At this point you have 9.5.4 Stock without Encryption on Slot A, With Encryption (and unused) on Slot B, and TWRP on Slots A and B.
Complete inital setup (I do the minimal at this point)
- Set a password, to verify if Dm-Verity_ForceEncrypt is working or not
Enable Developers Options
Enable Advanced Reboot in Developers Options
Note: My suggestion is to now power off and restart to ensure you have Wifi, as this is picky for some reason, and it is best to be sure.
Power -> Off
Power back on and verify that Wifi is still working, it should be.
If you want root:
Power -> Recovery
Upload Magisk: adb push Magisk-v19.2.zip /cache
- Install -> /cache -> Magisk-v19.2.zip
Wipe Dalvik
Reboot System
Finally: Verify that Safenet is passing in Magisk, it should be
You have 9.5.4 Stock with Encryption and Root on Slot A, With Encryption (and unused) on Slot B, and TWRP on Slots A and B. I hope having this in one place can help others, as I've tried to lay out exactly what I did each step of the way.
Parting suggestion: Maybe a good time to create a backup, one with EFS and Modem to just to be safe!
ERIC[/QUOTE]
Hello @tinyfish
Just dropping a note to thank you for the procedure. I wanted to achieve the same thing and I have been doing so through my own trial-and-error (and I'm actually documenting my steps as I go with the same intention of sharing to the community).
Apparently someone already beat me to it and I even used this written procedure. It worked for me. Although there are a few "differences" in the way I did it:
1. Instead of OOS version 9.5.4 I used OOS version 9.5.13 which is the latest Android Pie for the OnePlus 7 Pro as of this writing.
2. I used the latest version of the "DM-Verity and Forced Encrypt Disabler" zip which is version 10.20.2019 as of this writing. The older version didn't work and resulted to "Settings" app force-closing and thereby preventing me from booting. I didn't investigate but I assume that the reason is because the 05.21.2019 version is "older" than the OOS version 9.5.13 that I was flashing. I could be wrong. But it is important that I write it here so that it is made known and investigated by someone who has the time/knowledge/energy for it.
There are certain important apps that I use that couldn't run properly on Android 10, so I had to revert to Android 9 (Pie).
Thank you once again!
How to Root Note 9 with Magisk on Android 10 (Q) without Custom Recovery (Eg.. TWRP)
This method will work with most of the latest Samsung devices running Android 9/10. (Tested and Working on Galaxy Note 9 (Exynos) with Android 10 Q).
WARNINGS: I am not responsible for any damage made. Your device warranty will be void. Do it at your own risk.
Warning: Before Installing Magisk
Installing Magisk WILL trip KNOX
Installing Magisk for the first time REQUIRES a full data wipe. Backup before continue.
You have to have your bootloader unlocked before following the instructions
REQUIREMENTS: (Basic knowledge about android rooting.)
Stock Firmware
Odin v3.14.1
Magisk Manager (You can find in Downloads section of Magisk Thread, I used Magisk Manager v7.5.1)
STEP 1 Unlocking Bootloader (This may need to Wipe your Data/Factory Reset.)
Enable Developer Mode on the Galaxy Note 9
To Enable Developer Mode Open Settings option.
Under Settings option, select About phone, then choose Software Information.
Scroll down the screen and tap Build number several times until you see a message that says "Developer mode has been enabled".
Tap on the Back button and you will see the Developer options menu under Settings, and select Developer options.
Toggle the OEM Unlock option on
Then tap on the Turn On button
STEP 2 Patching and Flashing (This may need to Wipe your Data/Factory Reset.)
Download the firmware for your device.
Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5
Install the latest Magisk Manager
In Magisk Manager: Tap Install → Install → Select and Patch a File and select the AP tar file.
Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar
Copy the patched file to your PC with adb pull /sdcard/Download/magisk_patched.tar. Do not use MTP as it is reported to corrupt files. (I have copied with MTP)
Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files (I have used CSC instead of HOME_CSC). (Never flash only an AP file, as Odin can shrink your /data file-system if you do). Important: Uncheck “Auto Reboot” in Odin Options!
Magisk is now successfully flashed to your device! But there are still several steps before you can properly use the device.
STEP 3 Wipe data/factory reset (This may need to Wipe your Data/Factory Reset. : D)
We now want to boot into the stock recovery to factory reset our device. Full data wipe is mandatory! Do not skip this step.
Press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press the combo key to boot to recovery (e.g. on the Note 9 it is Power + Bixby + Volume Up). Since we want to boot into stock recovery, continue pressing the volume up button until you see the stock recovery screen. (I had to release power button when Note 9 logo appeared).
Use volume buttons to navigate through the stock recovery menu, and the power button to select an option. Choose Wipe data/factory reset to wipe the data of the device.
This time, we can finally boot to the system with Magisk. Select Reboot system now, and immediately press the combo key to recovery. After seeing the bootloader warning screen, release all buttons so it can boot to the system. (Just select Select Reboot system now)
The device will automatically reboot for the first time it boots. This is completely normal and done by design.
After the device is booted up, do the usual initial setup. The following steps will need an internet connection.
You shall see Magisk Manager in your app drawer; if not, manually install the Magisk Manager APK and continue to the next step. The app would be a stub and it shall automatically upgrade to the full Magisk Manager when you open it.
Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Voila! Enjoy Magisk
How to Root Note 9 with Magisk on Android 10 (Q) with Custom Recovery (Eg.. TWRP)
This method will work with most of the latest Samsung devices running Android 10. (Tested and Working on Galaxy Note 9 (Exynos) with Android 10 Q).
WARNINGS: I am not responsible for any damage made. Your device warranty will be void. Do it at your own risk.
Warning: Before Installing Rooting your device
Rooting your device WILL trip KNOX
Rooting your device for the first time may REQUIRES a full data wipe. Backup before continue.
You have to have your bootloader unlocked before following the instructions
REQUIREMENTS: (Basic knowledge about android rooting.)
Stock Firmware
Odin v3.14.1
TWRP For Android 10
Magisk Latest Stable ZIP or (I used Magisk Canary from Github)
DM-Verity, Force Encryption, and Disc Quota Disabler (I used Dm-Verity & ForceEncrypt Disabler v02.02.2020)
STEP 1 Unlocking Bootloader (This may need to Wipe your Data/Factory Reset.)
Enable Developer Mode on the Galaxy Note 9
To Enable Developer Mode Open Settings option.
Under Settings option, select About phone, then choose Software Information.
Scroll down the screen and tap Build number several times until you see a message that says "Developer mode has been enabled".
Tap on the Back button and you will see the Developer options menu under Settings, and select Developer options.
Toggle the OEM Unlock option on
Then tap on the Turn On button
STEP 2 Flashing Stock Firmware (This may need to Wipe your Data/Factory Reset.)
Reboot to download mode
To Boot into the Download Mode Power Off your device
Make sure you have a USB Type-C cable connected to your PC
Then press and hold the Volume Down and Bixby buttons at the same time
Hold these two buttons down and you insert the USB Type-C cable
Continue holding these two buttons down until you are greeted with the splash screen for Download Mode
Press the Volume Up button to bypass the splash screen and enter the Odin Mode
Now open Odin on your PC, Flash your firmware AP, BL, CP and CSC files. Important: Check “Auto Reboot” in Odin Options and keep your device in your hand and eye on Odin.
After you get flash got PASS! in Odin your device will restart and you will see blue screen saying you device is updating (or similar statement) for 2-5 seconds and then your device will restart again. (Next Step is Very Importent).
As soon as the screen turns off for second restart you have to press Power + Bixby + Volume Up to boot into the stock recovery. (I had to release power button when Note 9 logo appeared).
Use volume buttons to navigate through the stock recovery menu, and the power button to select an option. Choose Power Off and remove your USB Type-C cable from your device.
STEP 3 Flashing TWRP(This may need to Wipe your Data/Factory Reset.)
Now your device is in power off state you have to boot into the Download Mode to flash TWRP. (You can get info on STEP 2 to boot into Download Mode)
Now open/reset Odin on your PC and go to the Odin option uncheck “Auto Reboot”
Click on the AP button to select TWRP file (Eg: twrp-3.3.1-r3.7-q-crownlte.tar) and click Start. (Next Step is Very Importent).
After you get flash got PASS! in Odin Press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press the combo key to boot to recovery (e.g. on the Note 9 it is Power + Bixby + Volume Up). Since we want to boot into TWRP recovery, continue pressing the volume up button until you see the TWRP recovery screen. (I had to release power button when Note 9 logo appeared).
STEP 4 Rooting You Device (This may need to Wipe your Data/Factory Reset.)
In TWRP you have to swipe to allow the modification
Now format your data Tap Wipe->Format Data and type yes to continue. (You can Skip step 2 and 3)
No go back to TWRP home screen by pressing back button multiple times and tap Reboot and then click Recovery. (Your device will restart to TWRP recovery mode).
Insert your USB Type-C cable to connect your device to PC.
You will get your device MPT drive in my computer, Copy Magisk Canary zip file and Dm-Verity & ForceEncrypt Disabler v02.02.2020 zip file to your device.
Now you have to flash Magisk Canary in TWRP click Install and select Magisk Canary zip and start flashing. Then flash ForceEncrypt Disabler in TWRP. (If you get the mount error whioe installing ForceEncrypt Disabler then just ignore it and move to next step).
Click reboot to boot your system.
Done! Enjoy
Biometrics and fingerprint work after root?
Trimis de pe al meu SM-N960F folosind Tapatalk
Detonatte said:
Biometrics and fingerprint work after root?
Trimis de pe al meu SM-N960F folosind Tapatalk
Click to expand...
Click to collapse
Yes it works
Guessing this is non snapdragon use only. I don't see any models this works with but root isn't possible with North American note9 as far as I know. The boot loader is locked down.
I don't understand...where, how flash magisk_patched.tar ????
Please edit title to say this is Exynos only
thanks ..
secure folder still work after root?
Detonatte said:
I don't understand...where, how flash magisk_patched.tar ????
Click to expand...
Click to collapse
Follow STEP 2 Patching and Flashing (This may need to Wipe your Data/Factory Reset.)
Download the firmware for your device from sammobile or via Frija
Unzip the downloaded firmware on your PC and copy the AP tar file to your mobile device. (It is normally named as AP_[device_model_sw_ver].tar.md5).
Install the latest Magisk Manager on you mobile device.
In Magisk Manager: Tap Install → Install → Select and Patch a File and select the AP tar file that you have copied from your pc.
Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar.
Copy the patched magisk_patched.tar file to your PC with adb pull /sdcard/Download/magisk_patched.tar. (Do not use MTP as it is reported to corrupt files. (I have copied with MTP)).
Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files (I have used CSC instead of HOME_CSC). (Never flash only an AP file, as Odin can shrink your /data file-system if you do). Important: Uncheck “Auto Reboot” in Odin Options!
macgyver40 said:
Guessing this is non snapdragon use only. I don't see any models this works with but root isn't possible with North American note9 as far as I know. The boot loader is locked down.
Click to expand...
Click to collapse
Yes this is only for Exynos version, before posting this tutorials I don't have info about this.
TokedUp said:
Please edit title to say this is Exynos only
Click to expand...
Click to collapse
Done.
moaz1988 said:
thanks ..
secure folder still work after root?
Click to expand...
Click to collapse
Currently I am not using this System-as-root method to root my device because working version of Dm-Verity & ForceEncrypt Disabler is released so I am using TWRP method to root my device so I can't test secure folder on this rooting method. Now my device is rooted with Magisk via TWRP and secure folder is working without any issue so I think it will work with this method too.
Zer0De8th work perfect root with: twrp-3.3.1-r3.7-q-crownlte.tar, Magisk-v20.3(20300).zip and Disable_Dm-Verity_ForceEncrypt_02.02.2020.zip
Thx very much man!!!
Detonatte said:
Zer0De8th work perfect root with: twrp-3.3.1-r3.7-q-crownlte.tar, Magisk-v20.3(20300).zip and Disable_Dm-Verity_ForceEncrypt_02.02.2020.zip
Thx very much man!!!
Click to expand...
Click to collapse
Glad to know it works for you.
And SecureFolder work perfectly!
Trimis de pe al meu SM-N960F folosind Tapatalk
Hello
Thanks to the authors of this tutorial, and others on XDA, I completed a detailed procedure to Root the Galaxy Note 9 SM-N960F under Android 10 with the Recovery Custom TWRP which allows the backup and restoration of all partitions.
This procedure may seem long because it is very detailed because there are very important points not to miss so that the partitions are not locked by Android 10.
I hope the French / English translation is good because I am very bad in English
cordially
https://forum.xda-developers.com/showpost.php?p=81695605&postcount=324
Montero try backup and restore with TWRP? Work??
Trimis de pe al meu SM-N960F folosind Tapatalk
Yes work very fine for All partitions
Detonatte said:
Zer0De8th work perfect root with: twrp-3.3.1-r3.7-q-crownlte.tar, Magisk-v20.3(20300).zip and Disable_Dm-Verity_ForceEncrypt_02.02.2020.zip
Thx very much man!!!
Click to expand...
Click to collapse
Me too....
Restoring my data using Titanium Backup..
Samsung acc working
How to enable hidden menu since no more CSC folder (feature.xml)?
inamie said:
Me too....
Restoring my data using Titanium Backup..
Samsung acc working
How to enable hidden menu since no more CSC folder (feature.xml)?
Click to expand...
Click to collapse
Here is the new location for CSC feature.xml "/odm/etc/omc/XXX- your country code/conf/cscfeature.xml".
You have to Decode / Encode CSC files use OmcTextDecoder .
Many of the old CSC features don't work on Samsung Android Q
Zer0De8th said:
Here is the new location for CSC feature.xml "/odm/etc/omc/XXX- your country code/conf/cscfeature.xml".
You have to Decode / Encode CSC files use OmcTextDecoder .
Many of the old CSC features don't work on Samsung Android Q
Click to expand...
Click to collapse
Thanks,
Any idea how to set Magisk Manager.
New version 7.5.2 no option to hide selected application..
cant use certain apps like shopee pay and ewallet on rooted device.
Previous version 7.5.1 no problem.
Did google remove the option of adopted storage? I don't see it on my SM-T295. I rooted it so I was wondering if there is a Magisk Module that can make sd card act like adopted storage.
Thank you.
Can you tell how did you root your tab please.
Dharmtej said:
Can you tell how did you root your tab please.
Click to expand...
Click to collapse
I have tried many methods dude
Before Installing Magisk
Installing Magisk WILL trip KNOX
Installing Magisk for the first time REQUIRES a full data wipe (this is NOT counting the data wipe when unlocking bootloader). Backup your data before continue.
Download Odin (only runs on Windows) that supports your device.
Unlocking BootloaderUnlocking the bootloader on modern Samsung devices have some caveats. The newly introduced VaultKeeper service will make the bootloader reject any unofficial partitions in some circumstances.
Allow bootloader unlocking in Developer options → OEM unlocking
Reboot to download mode: power off your device and press the download mode key combo for your device
Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
Go through the initial setup. Skip through all the steps since data will be wiped again in later steps. Connect the device to Internet during the setup.
Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means the VaultKeeper service has unleashed the bootloader.
Your bootloader now accepts unofficial images in download mode
Instructions
Use either samfirm.js, Frija, or Samloader to download the latest firmware zip of your device directly from Samsung servers.
Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5
Press the Install button in the Magisk card
If your device does NOT have boot ramdisk, check the “Recovery Mode” option
Choose “Select and Patch a File” in method, and select the AP tar file
Start the installation, and copy the patched tar file to your PC using ADB:
adb pull /sdcard/Download/magisk_patched_[random_strings].tar
DO NOT USE MTP as it is known to corrupt large files.
Reboot to download mode. Open Odin on your PC, and flash magisk_patched.tar as AP, together with BL, CP, and CSC (NOT HOME_CSC because we want to wipe data) from the original firmware.
Your device should reboot automatically once Odin finished flashing. Agree to do a factory reset if asked.
If your device does NOT have boot ramdisk, reboot to recovery now to enable Magisk (reason stated in Magisk in Recovery).
Install the Magisk app you’ve already downloaded and launch the app. It should show a dialog asking for additional setup.
Let the app do its job and automatically reboot the device. Voila!
I have tried this one
I have tried flashing unofficial twrp
unofficial twrp 3.4.0 Root Samsung SM-T295 - unofficial twrp
download twrp 3.4.0 root Samsung SM-T295, user who own Samsung SM-T295 can root it by following the below instructions
unofficialtwrp.com
Can you help me please ?
This Will Safely Update Your Rev4 Through Rev10/A Firmware To Last Build Released G935VVRSBCTC1 And Allow You To Keep Root With Odin Flashable Firmware. This Will Only Update Firmware That Is Safe To Update And Keep Current BootloadersRoot For Rev11/B Bootloader Can Be Found Here
Downloads:
G935VVRSBCTC1.7zUSERDATA_AIO_G935_REV4_10_PERSIST_ROOT_11_01_22.tar.md5 -- This is the file that roots the phoneOdin3_v3.14.1_3B_PatcheD.7zS7 Flat Verizon Files Found Here
Instructions For Installing New Firmware And Rooted All At Once This Will Wipe Phone
1. Reboot phone too download mode Pwr + VolDwn + Home
2. Load Firmware in appropriate slots use regular CSC file not Home CSC and load Userdata file in the UserData slot in odin and flash
3. Phone will reboot too recovery and process the csc files then reboot on its own
4. When phone reboots back too recovery and you see the error screen then the recovery options screen you will need too Wipe Data/Factory reset.
5. Click reboot system.
6. Go through setup and check that you are rooted.
Rebooting Too Safestrap Recovery
1. Reboot phone as you would too boot stock recovery Pwr + VolUp + Home. It takes up too 40 seconds too boot recovery. Ignore the mount system errors on info screen
2. Enter recovery.
3. Too leave just reboot system ignore no system installed message if you get it
4. There is screen lag issues on scrolling in recovery. There is aroma file manager that takes care of this issue while in recovery but selecting zips too install may present a problem for this you can use the kernel manager recovery flash option while phone is booted too system. Simply select zip too flash and phone will reboot too recovery and flash it and reboot back too system. Most other function in recovery should work the issue is just scrolling too select files.
5. Flashfire is installed as an alternative as well
Features:
1. SuperSu Root- Do not try and update to make disable app notifications too get rid of update notice.
2. Safetrap recovery-Still working out scrolling issue
3. Flashfire
4. Kernel tweaks CPU governor set too Conservative
5. Entropy/Swapiness set to High
6. Build Prop tweaks to combat lag
7. Bloat removed from rom
8. Knox removed from rom
Bugs:
Eng Boot Image causes lag
Safestrap Recovery has scrolling issues
Random Reboots will most likely happen
Safetynet will not pass
Battery life may not be optimal
SuperSu cannot be updated
Flashfire may need date changed too 2016 to function if it just keeps closing on you
mine
is it possible you can get android 12 on the s7 edge verizon?
CodeNotSoGenious said:
is it possible you can get android 12 on the s7 edge verizon?
Click to expand...
Click to collapse
no