Cannot mount /vendor - Magisk

Hi, I want to install Magisk but i got this error.
- Mounting /system, /vendor
! Cannot mount /vendor
- Unmounting partitions
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/Magisk-v16.0.zip'
Click to expand...
Click to collapse
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027

Harry0309 said:
Hi, I want to install Magisk but i got this error.
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027
Click to expand...
Click to collapse
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.

HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
Thanks! Helped change recovery.
This is weird because I was using this recovery earlier with magisk and everything was 100% fine.

Hi, I want to

Can someone will tell how to do it step by step procedures I am also facing sam
will tell how to do it step by step procedures I am also facing same issue device mido

@Sajag I flashed recovery with twrp with treble support.

Harry0309 said:
@Sajag I flashed recovery with twrp with treble support.
Click to expand...
Click to collapse
can you send me the link of twrp for treble builds??

Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
EDIT: Sorry, didn't realize you were on mido, and not cheeseburger. Ignore the above.

Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
For mido: https://drive.google.com/open?id=1zdgzjXssY3CFhdxmLeSR0AlqZQQyZ-7F

I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????

Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Try a different rom/ or different twrp

Try other ROMs
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.

Sajag said:
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.
Click to expand...
Click to collapse
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating

Anil Jeenapati said:
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating
Click to expand...
Click to collapse
I am not sure . I flashed the latest version till now there are no new update . I think candy Os is a treble ROM try non treble rom

Using the treble supported TWRP fixed the vendor mount problem but I get into a bootloop when I try to install Magisk (latest version). I'm using the Havoc ROM (Android 8.1.0 - Treble Supported).
Edit: Got Magisk running by using a modified version for Treble.
Direct Link to the custom build of Magisk: Here
Source of the Link: LineageOS 15.1 by abhishek987

Flash this recovery, its for treble:
https://forum.xda-developers.com/re...covery-twrp-exclusive-3-2-1-5-treble-t3775081.
And flash Magisk 16.4 beta or higher

Same problem...
madbat99 said:
Try a different rom/ or different twrp
Click to expand...
Click to collapse
I also suffering that issue

Solution?
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hello I also installed the same ROM plus the Recovery of Red Wolf, remember that since its a treble you cannot mount vendor, but actually its easier than anything, why? cause the RR its based on Lineage OS and this last one is based on Cyanogen Mod, at the end what im trying to say its that the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Example of command with adb sideload: C:\Users\kaks\Downloads\adb\adb sideload "C:\Users\kaks\Downloads\adb\addonsu-15.1-arm64-signed.zip"
www . cyanogenmods.org / root-lineageos-15-1-android-oreo-rom /
Hope this work for you as it did for me

Kakashi171 said:
..the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Click to expand...
Click to collapse
OK, but can I then hide the "rooting" afterwards with Magisk?

HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
THANK YOU SO MUCH THAT HELPED!!
I JUST CHANGED RECOVERY NOTHING ELSE!

Related

[GUIDE] EMUI8 and Treble Rom on P8 Lite 2017

Hey Guys, i want to share the manual update to Oreo Beta and Treble rom installation with you.​
Perform everything to the letter.​
EMUI 8 USERS​
-Download @HassanMirza01 TWRP Image. www.hassanmirza01.blogspot.it/p/elite-twrp.html
-Download update.zip.
-Download update_data_full_public.zip (rename to ''update_data_public'').
-Download update_full_PRA-L11_hw_eu.zip (rename to ''update_all_hw'').
-Download HuRUpdater from forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279.
Put them (all 4 zip files) on a new folder called Oreo in external_sd.​
1 : Flash Twrp from bootloader.
2 : Boot into twrp, click install, select HuRUpdater.zip.
3 : Reboot.
4 : Done. ​
Want install Treble rom on it?​
1 : Download a Trebre GSI desired and put it on sdcard.
2 : Install twrp oreo version: www.drive.google.com/open?id=1rlQPRP234PoXY_yqup3oK_joOZGSIker, to flash use ''fastboot flash recovery_ramdisk Oreotwrp.img''.
3 : In twrp oreo, click on install, install image and select the GSI image and install to a ''system image'' partition.
4 : Wipe and Format Data to f2fs, wipe cache/dalvik/internal storage and reboot.
5 : Reboot and pray.
For troubleshooting look here.
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/​
CREDITS :
@HassanMirza01 for TWRP stuff.
@Atarii
@zxz0O0 For his new flashing tool.
IUME TEAM (@Askuccio_DROID, @Axan @Spectrothedragon @Trail Road @LastStandingDroid @Wire1122 @Razor10707 @dil3mm4.dev ) That provide me nocheck recovery.
Did you find any bugs on the AOSP ROM?, I'm thinking of flashing this now
Also, Did you tried the treble RR 6.0.0 ROM?
joaoj1999 said:
Did you find any bugs on the AOSP ROM?, I'm thinking of flashing this now
Also, Did you tried the treble RR 6.0.0 ROM?
Click to expand...
Click to collapse
No bugs for now , all working fine.
I have not tried it yet.
I don't understand ..
I followed all the steps, but it installed stock EMUI 5 with Android 7..
Now, at boot, it says "Failed verification", and it won't let me install twrp, even if bootloader looks unlocked
raiden99 said:
I don't understand ..
I followed all the steps, but it installed stock EMUI 5 with Android 7..
Now, at boot, it says "Failed verification", and it won't let me install twrp, even if bootloader looks unlocked
Click to expand...
Click to collapse
I pass to ALOO without lost frp, bl or imei. I will post screenshots here once done oreo step :fingers-crossed:
Current situation ..
raiden99 said:
I don't understand ..
I followed all the steps, but it installed stock EMUI 5 with Android 7..
Now, at boot, it says "Failed verification", and it won't let me install twrp, even if bootloader looks unlocked
Click to expand...
Click to collapse
You installed it from PRA-AL00XC01B220? Are you sure that you picked the correct update.zip of b320? I don't think...
Fr0nK said:
You installed it from PRA-AL00XC01B220? Are you sure that you picked the correct update.zip of b320? I don't think...
Click to expand...
Click to collapse
Probably I didn't install it correctly. What should I do now?
raiden99 said:
Probably I didn't install it correctly. What should I do now?
Click to expand...
Click to collapse
Idk what you want to do.
I want to install EMUI 8, but I'm not able to flash twrp because it fails.. even if the bootloader results unlocked.
raiden99 said:
I want to install EMUI 8, but I'm not able to flash twrp because it fails.. even if the bootloader results unlocked.
Click to expand...
Click to collapse
Are you in nougat or in oreo? If you are in nougat you have to digit fastboot flash recovery NAMEOFRECOVERYYYYYY.img and not fastboot flash recovery_ramdisk NAMEOFRECOVERYYYY.img
raiden99 said:
View attachment 4466545
current situation ..
Click to expand...
Click to collapse
why you want to install a chinese version if i tell that you have to rebrand to a honor 8 lite al00?
Delete
DarkJoker360 said:
Delete
Click to expand...
Click to collapse
for me isn't work, follow the steps to the letter. I just done from c432 to al00. wasn't able to flash oreo also tried to echo command from both elite twrp and mine..I'm trying as latest time.
haky 86 said:
for me isn't work, follow the steps to the letter. I just done from c432 to al00. wasn't able to flash oreo also tried to echo command from both elite twrp and mine..I'm trying as latest time.
Click to expand...
Click to collapse
This is the reason why i don't give support to rebranding . I tried so many times before getting the final result. Hope you will achieve that.
- none here -
Fr0nK said:
Since nobody manages to install this and finds many problems in doing so; failing to support everyone. If nobody besides me can install emui8 and treble rom, i delete the guide
Click to expand...
Click to collapse
Pls don't delete this guide I really want to try it later. I'm just little bit worried about bricking my device.
Why you don't just describe how you rebranded your device? Maybe this will help
MIcHiJK said:
Pls don't delete this guide I really want to try it later. I'm just little bit worried about bricking my device.
Why you don't just describe how you rebranded your device? Maybe this will help
Click to expand...
Click to collapse
Too complex(but easy) , too many different situations, can't support this. Sorry.
Fr0nK said:
Too complex(but easy) , too many different situations, can't support this. Sorry.
Click to expand...
Click to collapse
Take your time, but I'm willing to read that too, no matter how "complex"
I successfully installed oreo on my device but now i have a problem. I can't install working gapps. I used amr64 8.0 opengapps but they crash when i try to put my google account so i can't use google play store or any other google service. I also tried GSM install but it's not working. how to fix?

Error 1 after reflashing ROM, can't (un)install Magisk

Hello, so I decided to reflash my ROM because I kept running into issues, and I didn't uninstall Magisk before doing so.
Then when I tried flashing Magisk it showed me error 1. Flashing the uninstaller gives the same error. Magisk Manager shows that it is not installed, Root Checker states that the device is unrooted, and so far the only app that mentioned my phone being rooted is LastPass.
What can I possibly do to reinstall Magisk so it's back on my device in its full grace?
I checked other posts and either they are not related to my problem or didn't help
Phone: Xiaomi Redmi Note 4 Snapdragon, Recovery: official TWRP non-treble, ROM: latest build of official AOSP Extended
Maybe try dirty flashing and flashing Magisk again?
Not Sally when Magisk is already installed, I can flash it again with no problem. Weird that you're having these issues. ?
LennyTheCat said:
Hello, so I decided to reflash my ROM because I kept running into issues, and I didn't uninstall Magisk before doing so.
Then when I tried flashing Magisk it showed me error 1. Flashing the uninstaller gives the same error. Magisk Manager shows that it is not installed, Root Checker states that the device is unrooted, and so far the only app that mentioned my phone being rooted is LastPass.
What can I possibly do to reinstall Magisk so it's back on my device in its full grace?
I checked other posts and either they are not related to my problem or didn't help
Phone: Xiaomi Redmi Note 4 Snapdragon, Recovery: official TWRP non-treble, ROM: latest build of official AOSP Extended
Click to expand...
Click to collapse
Did you wipe everything? Wipe system and data before re flashing your rom.
@LennyTheCat To be absolutely sure what's going on you're going to have to provide the recovery log, saved after you've attempted you flash Magisk.
madbat99 said:
Did you wipe everything? Wipe system and data before re flashing your rom.
Click to expand...
Click to collapse
Yes I did
Didgeridoohan said:
@LennyTheCat To be absolutely sure what's going on you're going to have to provide the recovery log, saved after you've attempted you flash Magisk.
Click to expand...
Click to collapse
Will provide later now I have stuff to do
@Didgeridoohan here's the log file
LennyTheCat said:
@Didgeridoohan here's the log file
Click to expand...
Click to collapse
Try updating your TWRP. That has solved "cannot mount vendor" for other Mido users.
https://forum.xda-developers.com/search/forum/5903?query=mido cannot mount vendor
Didgeridoohan said:
Try updating your TWRP. That has solved "cannot mount vendor" for other Mido users.
https://forum.xda-developers.com/search/forum/5903?query=mido cannot mount vendor
Click to expand...
Click to collapse
well, it has installed no problem, but then my phone got stuck in a bootloop after rebooting. I have to reflash everything now, will tell if it worked later
@Didgeridoohan when I install Magisk, the phone keeps running into bootloops. Clean install of the ROM and Gapps seems to work fine. Tried 16.0 and 16.4 packages
LennyTheCat said:
@Didgeridoohan when I install Magisk, the phone keeps running into bootloops. Clean install of the ROM and Gapps seems to work fine. Tried 16.0 and 16.4 packages
Click to expand...
Click to collapse
Well... You're using a Treble ROM, right? So I'm assuming you're using a Treble modified Magisk version (since there's no official Treble support in Magisk yet)... If not, I'm sure you can find the relevant information in your ROM's thread.
Always go to the source...
Didgeridoohan said:
Well... You're using a Treble ROM, right? So I'm assuming you're using a Treble modified Magisk version (since there's no official Treble support in Magisk yet)... If not, I'm sure you can find the relevant information in your ROM's thread.
Always go to the source...
Click to expand...
Click to collapse
I decided to flash Lineage OS and then I flashed the Magisk package included in the post. Now it's working all squeaky and shiny. Thanks for help anyway

Guide to install Android 8.1 or 9 custom ROM?

The question speaks for itself,I cannot find really any accurate ways to get started because I once tried to install Oreo beta (before official was out) and flashed a Oreo recovery onto Nougat and bricked my phone,and the only way was to use DC Phoenix so for now I have kept my phone on EMUI 8 stock.
So if anyone can tell me the steps to install let's say an Android 8.1 Treble ROM or Android 9 when it gets good as a daily driver,I know that you need to do the following things:
-unlock the bootloader
-install a recovery
-flash a ROM through fastboot or through recovery and after that flash Gapps and a modded version of Magisk
That is pretty self explanatory,but I have seen like that you cannot use TWRP since there is a problem when wiping data and that you need to have Huawei stock recovery and some important things to consider since I see it is pretty easy to brick these phones if you don't follow instructions but since there isn't really clear instructions to do some of these things,I am asking here if anyone can explain to me.
And yes,I do have my bootloader unlock code since as I stated,I tried to do this before.
dinoderda said:
The question speaks for itself,I cannot find really any accurate ways to get started because I once tried to install Oreo beta (before official was out) and flashed a Oreo recovery onto Nougat and bricked my phone,and the only way was to use DC Phoenix so for now I have kept my phone on EMUI 8 stock.
So if anyone can tell me the steps to install let's say an Android 8.1 Treble ROM or Android 9 when it gets good as a daily driver,I know that you need to do the following things:
-unlock the bootloader
-install a recovery
-flash a ROM through fastboot or through recovery and after that flash Gapps and a modded version of Magisk
That is pretty self explanatory,but I have seen like that you cannot use TWRP since there is a problem when wiping data and that you need to have Huawei stock recovery and some important things to consider since I see it is pretty easy to brick these phones if you don't follow instructions but since there isn't really clear instructions to do some of these things,I am asking here if anyone can explain to me.
And yes,I do have my bootloader unlock code since as I stated,I tried to do this before.
Click to expand...
Click to collapse
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
What is gsi?
JoanSB1 said:
What is gsi?
Click to expand...
Click to collapse
Generic System Image.
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
And if I have downloaded a zipped ROM instead of an GSI,I do the same steps but in TWRP I flash the ROM with the Gapps and Magisk,right?
Also,can I use NoCheckRecovery for Oreo when I need to wipe data instead of stock recovery since I think it would come in handy if I would need to re-flash something through that without Huawei checks and it seems to be easier to find?
And I flash the recoveries to recovery_ramdisk,just to be sure,I know some things did change with Oreo so I am asking?
dinoderda said:
And if I have downloaded a zipped ROM instead of an GSI,I do the same steps but in TWRP I flash the ROM with the Gapps and Magisk,right?
Also,can I use NoCheckRecovery for Oreo when I need to wipe data instead of stock recovery since I think it would come in handy if I would need to re-flash something through that without Huawei checks and it seems to be easier to find?
And I flash the recoveries to recovery_ramdisk,just to be sure,I know some things did change with Oreo so I am asking?
Click to expand...
Click to collapse
what rom are you trying to install?
All treble roms come in a .img file not a .zip.
MrViking said:
what rom are you trying to install?
All treble roms come in a .img file not a .zip.
Click to expand...
Click to collapse
Oh,I thought Pixel Experience ROM was meant to be installed through recovery,bloody hell pardon me.
Never mind then.
I am gonna wait for Android 9 to get a bit more stable and that official OpenGapps gets released and then I am going to install it.
Thank you very much for helping me!
dinoderda said:
Oh,I thought Pixel Experience ROM was meant to be installed through recovery,bloody hell pardon me.
Never mind then.
I am gonna wait for Android 9 to get a bit more stable and that official OpenGapps gets released and then I am going to install it.
Thank you very much for helping me!
Click to expand...
Click to collapse
Thats ok, we all make mistakes lol.
Yeah, a pixel experience 9.0 gsi is coming soon, and these GSI's are pretty stable. If you need any more help you can ask me:good:
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
I did those steps trying to flash RROS6 build BENVENUTI (https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-rros-pra-t3774444) and I failed. I don't know what I'm doing wrong. Please help me to install Resurrection Remix! :crying:
JoanSB1 said:
I did those steps trying to flash RROS6 build BENVENUTI (https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-rros-pra-t3774444) and I failed. I don't know what I'm doing wrong. Please help me to install Resurrection Remix! :crying:
Click to expand...
Click to collapse
What is the exact problem you aee having? Bootloop? Error when trying to flash?
dinoderda said:
What is the exact problem you aee having? Bootloop? Error when trying to flash?
Click to expand...
Click to collapse
Error when trying to flash
JoanSB1 said:
Error when trying to flash
Click to expand...
Click to collapse
Tell me the steps in order which you did when you were trying to flash the ROM.
dinoderda said:
Tell me the steps in order which you did when you were trying to flash the ROM.
Click to expand...
Click to collapse
Ok, it clearly says that that Rom is discontinued, read the last post.
Use a gsi from the treble enabled device development forum and flash it with fastboot (yesyou can use android pie 9.0 gsi's as well as long as they don't say sGSI on it.
MrViking said:
Ok, it clearly says that that Rom is discontinued, read the last post.
Use a gsi from the treble enabled device development forum and flash it with fastboot (yesyou can use android pie 9.0 gsi's as well as long as they don't say sGSI on it.
Click to expand...
Click to collapse
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
JoanSB1 said:
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
Click to expand...
Click to collapse
Use ones from the treble enabled device forum. You can even use pie, so why not?
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
JoanSB1 said:
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
Click to expand...
Click to collapse
Here is an android P gsi for this device. It works very well:
https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Can I install anything with lock bootloader?
box710 said:
Can I install anything with lock bootloader?
Click to expand...
Click to collapse
no
MrViking said:
Use ones from the treble enabled device forum. You can even use pie, so why not?
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
Here is an android P gsi for this device. It works very well:
https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
Does the USSD code work? is that it is important to me and I do not know a ROM that works
dinoderda said:
Generic System Image.
Click to expand...
Click to collapse
Is there a guide to install this I paid DC unlock to get bootloader unlocked but on noughat and cannot find a twrp for noughat:good:
Pie gsi
Hi all,
I have installed Pixel Experience (Oreo) gsi ROM no problem. But if I try to flash any Pie gsi ROM it just goes into a boot loop. I flash system via fastboot and seems OK. Reboot and it just boot loops a few times and goes to the recovery screen that prompts to download and install the standard system.
Has anybody come across this or have any suggestions. I have tried a few different Pie gsi ROMs and same thing happens.
Thanks
Mick

Decrypt.zip for Asus Stock Pie ROMs.

Decrypt.zip for Asus Stock Pie ROMs.
Thanks to @SagarMakhar
Download:
https://drive.google.com/file/d/1RUXe6g_gqG_LRM8qi-g9gqjqhm7BA0bO/view?usp=drivesdk
****Procedure: (Different from Oreo).****
1.Flash Rom
2.Reboot to Recovery (TWRP)
3.Mount /Vendor
4.Flash Decrypt.zip
-------------------------------------
#Flash order we used for Oreo wont work.
Hit Thanks if i helped.
Edit[ 30 May 2018] : A new TWRP is been published that doesn't require this zip while flashing stock roms.
Decrypt for Pie stock rom - Asus Max Pro M1
Hi,
Thank to your post, however, when I tried to download the file, it say that I must obtain your approval. Can you give approval to the request or change the publish mode of the file on drive?
Thank you
akhil850 said:
Decrypt.zip for Asus Stock Pie ROMs.
Thanks to @SagarMakhar
Download:
****Procedure: (Different from Oreo).****
1.Flash Rom
2.Reboot to Recovery (TWRP)
3.Mount /Vendor
4.Flash Decrypt.zip
-------------------------------------
#Flash order we used for Oreo wont work.
Hit Thanks if i helped.
Click to expand...
Click to collapse
nemo1810 said:
Hi,
Thank to your post, however, when I tried to download the file, it say that I must obtain your approval. Can you give approval to the request or change the publish mode of the file on drive?
Thank you
Click to expand...
Click to collapse
LINK NOW UPDATED
Thanks You
I can download it now, thank sir .
akhil850 said:
LINK NOW UPDATED
Thanks You
Click to expand...
Click to collapse
:good:
nemo1810 said:
I can download it now, thank sir .
:good:
Click to expand...
Click to collapse
NP, Hit thanks if i helped
didn't worked for me i m on latest pie 053 i updated to latest firware and the i falshed this zip while mounting vendor
Update - It worked after i updated to the latest magisk 19.4 Thanks mate
akhil850 said:
Edit[ 30 May 2018] : A new TWRP is been published that doesn't require this zip while flashing stock roms.
Click to expand...
Click to collapse
@akhil850
The official TWRP????
If not, please provide us the link of that TWRP which doesn't require this zip to be flashed after flashing stock ROM. I am planning to upgrade my device from Oreo to Pie, but I read somewhere that flashing decrypt.zip of Pie is erasing MAC IDs of wifi adapter. Can you please confirm that this zip is not erasing MAC ID of wifi adapter?
dang it, I got system corrupt notice after unlocked bootloader notice. Then it goes turn off.
After that I got that notice again while using pie firmware, any suggestions?

Question pixel experience for redmi note 10s

why Pixel experience rom is not available for redmi note 10s yet?
i beg developers attention, plz make this rom for redmi note 10s
there is not an official TWRP, thats why.... but you can still install GSI roms
maur0p said:
there is not an official TWRP, thats why.... but you can still install GSI roms
Click to expand...
Click to collapse
I have some question
1. Does phone manufacture provide this twrp?
2. how can I install GSI ROMs?
3. Is there any possibility to release the twrp mode?
is there any change to release pixel experience for redmi note 10s
shiblu06 said:
I have some question
1. Does phone manufacture provide this twrp?
2. how can I install GSI ROMs?
3. Is there any possibility to release the twrp mode?
Click to expand...
Click to collapse
1. we already have twrp
2. fastbootd
3. what
Oh btw just to add, lineageos (built from source) booted, but don't expect it to be released soon, nor pixel experience to get released
J6idot said:
1. we already have twrp
2. fastbootd
3. what
Oh btw just to add, lineageos (built from source) booted, but don't expect it to be released soon, nor pixel experience to get released
Click to expand...
Click to collapse
but eventually note 10s will get pixel experience right , i mean without bugs
phoenixnithish2112 said:
but eventually note 10s will get pixel experience right , i mean without bugs
Click to expand...
Click to collapse
too late
does flashing a miui rom;for example miui14; using pe recovery lock the bootloader again?
is there way to flash to the new miui14 without locking back the bootloader?
thank you
kidbetin said:
does flashing a miui rom;for example miui14; using pe recovery lock the bootloader again?
is there way to flash to the new miui14 without locking back the bootloader?
thank you
Click to expand...
Click to collapse
No, you will get a nice bootloop if you try that
tutibreaker said:
No, you will get a nice bootloop if you try that
Click to expand...
Click to collapse
thank you
what rom can i flash with the pe recovery?
kidbetin said:
thank you
what rom can i flash with the pe recovery?
Click to expand...
Click to collapse
none if you want still have a phone to use
There is one rom now https://download.pixelexperience.org/rosemary/
Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
Flash a recovery on your device by typing (replace <recovery_filename> with the actual filename!):
Click to expand...
Click to collapse
fastboot flash boot <recovery_filename>.img
Click to expand...
Click to collapse
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments
portcere said:
Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments
Click to expand...
Click to collapse
Hey, I ran into the same problem today. If I find a solution, I'll let you know. I would be glad if you share too.
I tried again yesterday to install Pixel Experience, and again it just boot loops when booting into recovery mode. I've now reinstalled stock Miui and will try again.
portcere said:
Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments
Click to expand...
Click to collapse
There no recovery partition so it shouldn't. I'm on this ROM currently and have no problems with installation. The guide says that you need to be on latest global a11 miui (12.5.16.0.RKLMIXM). You didn't miss that?
xuser_0 said:
There no recovery partition so it shouldn't. I'm on this ROM currently and have no problems with installation. The guide says that you need to be on latest global a11 miui (12.5.16.0.RKLMIXM). You didn't miss that?
Click to expand...
Click to collapse
I've no idea what version of the bootloader I'm on as getprop ro.bootloader returns 'unknown'
But, as I'm on "latest" v13 Miui, I suspect the bootloader is the wrong one. Do I have to downdate to 12.5 before installing PE?
Edit: I've downdated the device to 12.5 RKLMIXM and have flased the PE recovery image, all okay. It's now installing the PE zip, so fingers crossed that's it.
Edit edit: I have PE on my device! Thank you at @xuser_0 for highlighting were I'd gone wrong.
The key @JohanGriman appears to be to ensure your device is not on the latest Miui but the latest 12.5 version.
Is there any instructions on how to install Magisk on this? I've tried to usual ways (via apk and flashing .zip thru adb sideload) but it fails to repack the boot image. Will a manual patch of the boot image and reflash work?
Edit: I've been able to directly patch the PE recovery image (as used in the installation process) using the Magisk apk on my device. Can I now flash this patched image to the device?
I don't want to try it as other instructions I've found talk about a vbmeta image that needs to be flashed too, and I don't know if that's necesary.... and I don't want to trash my device again!
Just flash it but it will break safetynet. To fix safetynet enable Zygisk, add google play services to deny list and install shamiko.
xuser_0 said:
Just flash it but it will break safetynet. To fix safetynet enable Zygisk, add google play services to deny list and install shamiko.
Click to expand...
Click to collapse
Thanks, that worked perfectly

Categories

Resources