Testing developer options with the 7+ plus, I enabled sRGB, but now I can't disable it. Toggling sRGB does nothing and I'm stuck with a yucky red hue for everything.
I've tried factory reset, and turning on and off pin code login and restarting to no avail. Will I need to install the original firmware?
Related
To get around banding issue I was using that hack to enable 32bit colors. As a side effect I was getting that red screen sometimes when I turn on the phone. Now I am on Mango and that hack doesn't work anymore. So I tried to return all reg keys to a default values. But I still get that red screen.
Is there any other way to enable 32bit colors? If not is there any way to get rid of the red screen issue?
I've fixed that by resetting the phone
you solve that problem, if you restart your phone several times, like 3 or 4.
i have the same problem, after enable 32bits, and restart several times, and the phone automatically disables the 32 bits.
hope it works for you.
I turn off my phone every night. Since I'm on the Mango at least 10 days, phone has been restarted at least 10 times. It didn't help. I wouldn't mind if I had 32bit.
So, my phone seems to have commited seppuku.
I'd modded it with CM 12.1 and a couple of Xposed modules, and it has been working flawlessly until this afternoon.
After coming back from lunch, I pickup my phone to check on notifications, but the screen seems unresponsive, no matter what I'd do, it would stay black. I tried mashing the power button, volume, nothing. At all.
So I forced a reboot by holding the power button for 10 seconds or so, and it just wouldn't go past the bootloader warning, I tried rebooting several times already and even tried going into TWRP recovery, but it would just get stuck loading, never showing the interface..
So then, after a while googling, i found this thread and I got back to stock Lollipop 5.0.2. But now the problem is that the phone refuses to use my SIM cards, it detected both of them and named the first one.
I've got no phone service, no data service, nothing at all. The weird thing is that when I try to make a phone call it tells me that I must disable airplane mode before doing so (which I obviously have disabled, no reason for me to enable it). I tried enabling airplane mode, disabling it again, enabling it then rebooting, then disabling it... nothing has worked so far. I've dug into the the phone settings as well without success.
I don't know what to do, I'm out of options... Someone please help me
My XT1092 powered down by itself at 4% yesterday, so I plugged it into a power bank and left it on its own for a while. At 24%, I tried to power it on, and the device boots, but gets stuck on the final image of the boot sequence for longer than usual, before booting into a black screen. From here, I can do some things, like Moto Display and Voice still work (I can get it as far as opening the camera, but anything else requires me to unlock my device, even tho I don't have a password), and notifications like WhatsApp and Gmail come in fine and can be seen, but the moment I swipe up from Display to unlock it, I can't do anything. Touchscreen is unresponsive in camera interface when launched, but volume to capture and screenshots work. Moto Gestures don't work, except double twist in camera interface to launch front camera. From a thread on reddit, this is apparently not the first time something like this has happened, but it's incredibly frustrating to get this. I've only had my Moto X for 3 months, since April, and in that time, I've had to factory reset it twice and send it in for repairs once due to a faulty power button. I've connected it to a PC in hopes of backing my stuff up, but while PC recognizes XT1092, it says there is nothing on the phone. Wiped the cache twice in an attempt to fix, and boot through fastboot, but once again, no luck. Running stock 5.1, unrooted, locked. Can access recovery menu, so whatever I can access from there is probably my best bet.
P.S. What does reboot to bootloader and view recovery logs mean?
Same thing here. Happened twice to me also. Not sure what causes it.
http://forum.xda-developers.com/moto-x-2014/help/boot-animation-phone-stuck-t3148085
KB Smoka said:
Same thing here. Happened twice to me also. Not sure what causes it.
http://forum.xda-developers.com/moto-x-2014/help/boot-animation-phone-stuck-t3148085
Click to expand...
Click to collapse
The new boot ipscreen doesn't appear on my device, but WhatsApp has warned me of date and time wrong, set to July 1, through Moto Display.
I am having the exact same issue. Has anybody had a luck resolving it short of a factory reset?
My phone battery died last night. I plugged my phone in, let it get about 15% charge, then tried to turn it back on. The phone boots like normal, but after the boot animation goes away, the screen is black. Active notifications still seem to work, and I can hold the power button to get the Power Down option. I can boot into the bootloader & access recovery just fine. However, my phone is fully stock (no root, no bootloader unlock, no anything). I can't seem to access ADB when the phone is powered normally (ie, when I'm at this mysterious black screen), but it's possible that USB debugging isn't even enabled.
So far, I've found a bunch people who've said a full factory reset will fix the problem, but I'm looking for another solution, or at least a way to grab my data before I reset. Since my bootloader's still locked, I can't seem to use fastboot boot to boot into TWRP, and I can't find any other way to access my data to copy it off the phone. I've tried wiping the cache using the stock recovery to no avail. Any suggestions?
Hi all, forgive me if this has already been asked in some form.
My girlfriends Verizon Moto X lost battery one day while she was playing a game. After she charged and tried booting again, it just booted to a black screen. It still runs through the full boot animation. Weirdly enough, active display will still show her information (and can be interacted with until unlocked), and holding power will bring up a power menu for shutdown. The camera gesture also works to launch it, but you can't interact with anything at all. Safe mode provides the exact same issues.
She is running the latest 5.1 update and is fully stock. She also does not wish to root or flash a custom recovery.
I have tried to pull the data, which windows recognizes as a media device, but shows empty when clicked on. OSx immediately says that the storage can not be accessed over android file transfer. I plugged it in for ADB but ADB won't seem to find it when its turned on. It is recognized in fastboot though. I also wiped the cache via the stock recovery, but that didn't help.
I believe a factory reset will be the solution to the black screen, but she has a bunch of photos she would really like to save. Is there anyway for me to actually get them off of the phone? If she can get those, I can get it factory reset for her no problem.
Thanks for any advice!
The exact same thing has happened to my girlfriend's phone as well and I'm also looking for a solution to recover the data. Moto X (2014) Pure, 5.1
The device boots. The Motorola boot animation plays all the way through, the screen brightness dims slightly as normal, and then the Amber Alert from the previous night vibrates the phone several times and displays over a fully black background. There are no soft buttons and no status bar. The home screen appears not to have loaded (yet?)
Attempts to click "OK" to close the alert fail.
The phone is hot. It is working hard. Something stuck in a loop?
The power button will bring up the "Power Off" prompt with no issues. The animation plays smoothly and the phone can be powered off as normal. The phone is able to recognize touch input here.
Calling the phone while it's on will play a ringtone. It is receiving calls.
Plugging the phone into a computer will show up as an MTP device. However, there are no contents listed.
Sometimes, the phone will prompt that the "System" process is not responding and will ask to close it. This has no effect.
Booting into Safe Mode has no effect.
Clearing the application cache from recovery mode has no effect.
I have a CSE degree but absolutely no Android experience. Forensics on a NAND dump or something like that isn't out of the question, unless it's not possible. Hope you're able to get some help.
Edit: Some other threads with the same issue:
http://forum.xda-developers.com/mot...-screen-to-recover-data-t3168103#post62117413
http://forum.xda-developers.com/moto-x-2014/help/black-screen-boot-t3161110
https://www.reddit.com/r/MotoX/comments/3cf4gr/51_black_screen_after_turning_on/
https://www.reddit.com/r/MotoX/comments/3aqr95/moto_x_2nd_gen_black_screen_after_update/
https://www.reddit.com/r/MotoX/comments/383ej6/black_screen_on_startup/
I am having the exact same issue. Has anybody had a luck resolving it short of a factory reset?
My phone battery died last night. I plugged my phone in, let it get about 15% charge, then tried to turn it back on. The phone boots like normal, but after the boot animation goes away, the screen is black. Active notifications still seem to work, and I can hold the power button to get the Power Down option. I can boot into the bootloader & access recovery just fine. However, my phone is fully stock (no root, no bootloader unlock, no anything). I can't seem to access ADB when the phone is powered normally (ie, when I'm at this mysterious black screen), but it's possible that USB debugging isn't even enabled.
So far, I've found a bunch people who've said a full factory reset will fix the problem, but I'm looking for another solution, or at least a way to grab my data before I reset. Since my bootloader's still locked, I can't seem to use fastboot boot to boot into TWRP, and I can't find any other way to access my data to copy it off the phone. I've tried wiping the cache using the stock recovery to no avail. Any suggestions?
Update?
Hello,
I am having this issue as well.
Unfortunately I am unable to perform any form of factory reset, the bootloader also just brings me to the black screen and I am unable to use soft keys. The kicker for me is that I cannot connect to my PC with a working USB. I used to have that available and now no device is recognized.
Hello,
yesterday my Redmi 9C NFC lock screen didn't work and the only thing that worked was to turn off the phone, restart it, switch to airplane mode and mute it. So I factory reset it and after booting up I got the activation screen. So I filled in the password, gave the verification code from the SMS, but the phone still remains on the same screen. Does anyone know what to do with it?
Thanks in advance for your response