Database Develop

[Q] galaxy note not working after update

i just updated my galaxy note and when i rebooted its not getting passed the note N 7000 screen can any one help me with that? i had previously updated it to XXLA3 and it was working fine!

noteN7000 said:
i just updated my galaxy note and when i rebooted its not getting passed the note N 7000 screen can any one help me with that? i had previously updated it to XXLA3 and it was working fine!
Click to expand...
Click to collapse
Was it an OTA or KIES update u did?
U rooted and on stock or any custom rom ?
If not rooted....then u can still try hitting volume up + home + power buttons all at the same time and holding them pressed till the time the same N7000 logo shows up and leave the buttons then. The phone should boot into stock recovery. Now try clearing the cache there if the option is available. If nothing works then either wipe/format your note (warning all data will be lost except the internal/external sd card) or reflash the firmware through PC odin using Dr Ketan's guide from the stickies post in the development section of note forum here on xda.

How did you update you phone? Via kies?

i am new to all these things! i haven't rooted my phone as well! jst went on to "about phone" and update. after which it didn't started. tried the vol. up home key and power didn't worked...

So it was an OTA update. Did you tried pressing volume down + home + power button for booting into download mode?

ya tried that as well but it said custom OS can cause critical problems so canceled it...

noteN7000 said:
ya tried that as well but it said custom OS can cause critical problems so canceled it...
Click to expand...
Click to collapse
vol up+home+power should work. Try that again and keep pressing them till the time the n7000 logo shows up and leave them immediately after it.
if u are not able to get into recovery then the only way for you is to flash via odin.
Refer the guide and roms here-
http://forum.xda-developers.com/showthread.php?t=1424997

does that mean my phone will be rooted?

noteN7000 said:
does that mean my phone will be rooted?
Click to expand...
Click to collapse
No. You just flash the latest firmware you want from the PC odin. The phone will be stock rom and wont be rooted unless you run the rooting tool.
Remember to read the full post !

[Q] I need help

Hey guys, i've recently changed from iphone to android and i'm using galaxy note which i found it an amazing phone, i successfully updated it to the latest version and it was working great then today i tried to update it to the jelly bean and i followed dome steps i found online by downlading some files on the sd card and going to the recovery mode and installing them but suddenly my phone shut down and pressing the power button + volume up button + home button is not doing anything and i don't know what to do so can anyone help me please to solve this problem????

Dr.Andreww said:
Hey guys, i've recently changed from iphone to android and i'm using galaxy note which i found it an amazing phone, i successfully updated it to the latest version and it was working great then today i tried to update it to the jelly bean and i followed dome steps i found online by downlading some files on the sd card and going to the recovery mode and installing them but suddenly my phone shut down and pressing the power button + volume up button + home button is not doing anything and i don't know what to do so can anyone help me please to solve this problem????
Click to expand...
Click to collapse
Did u flash safe kernel before flashing the JB rom? Or did u factory reset/wiped on stock kernel?

dude just saying downloading files and installing wont work.. you need to let us know the exact files you downloaded, method followed, and state of the phone before installing the new rom, as in if it was rooted or what version of rom? anything

shyamub4u said:
Did u flash safe kernel before flashing the JB rom? Or did u factory reset/wiped on stock kernel?
Click to expand...
Click to collapse
No, i just chose the security wipe and if you please can you show me how to just restore my phone to the factory settings without having to go to the recovery mode and i'm sorry but i dont really understand what is the root, flash and kernel excuse me but i am an iphone user.

nokiamodeln91 said:
dude just saying downloading files and installing wont work.. you need to let us know the exact files you downloaded, method followed, and state of the phone before installing the new rom, as in if it was rooted or what version of rom? anything
Click to expand...
Click to collapse
ok the files i've downloaded and put them on the sd card were aokp_n7000_jb_build-2 and gapps-jb-20121011-signed and after copying them on the sd card i pressed the power+volume up+home buttons and chose to wipe everything then i went and chose the aokp_n7000_jb_build-2 and it started installing it then suddenly it turned off and nothing is working since then

hmmm..
ok check if something happens if you press the (vol down + power + home) for a while. report back

nokiamodeln91 said:
hmmm..
ok check if something happens if you press the (vol down + power + home) for a while. report back
Click to expand...
Click to collapse
well nothing is happening at all when pressing the 3 buttons together, all i wanna do is restoring it to factory settings and nothing more but i don't know how to do this now

its the vol down this time not up..
Remove battery
reinsert it after a few secs
again vol down power and home
if nothing happens try charging the battery for a while and try the above steps

1) Charge your phone.
2) Install Kies on your computer.
3) Restart computer
4) Plug phone into computer. Is it detected?
5) Repeat step 4 but after pressing volume down/power/home
6) Repeat step 5 but after using samsung USB jig (you have to buy it but it's cheap)
the samsung USB jig will try to 'force' your phone into the same mode that volume down/power/home does.
I would never ask a regular xda user this question but...
are you sure you have an N7000? does it have a home button? how many contacts are on the battery?
---------- Post added at 08:52 PM ---------- Previous post was at 08:49 PM ----------
Dr.Andreww said:
i successfully updated it to the latest version and it was working great then today i tried to update it to the jelly bean and i followed dome steps i found online by downlading some files on the sd card and going to the recovery mode and installing them but suddenly my phone shut down
Click to expand...
Click to collapse
i hate to say it but he updated to the latest stock and then tried to flash files from recovery.
it sounds to me like mmc_cap_erase bug
assuming, of course, that he doesn't have an i717 and flashed N7000 files over it.
which would just as easily brick
_______________________________________________________________________________________________________________________
OP all hope is not lost though, if you can get into download mode we can save your phone. on the other hand if you are under warranty, go to the Samsung store and tell them you tried to factory reset from stock and it wouldn't boot again (and nothing about rooting etc). you will not be under warranty if you are in the USA or Canada and have an N7000
sounds to me like your flash counter should still be 0

guitarplayerone said:
1) Charge your phone.
2) Install Kies on your computer.
3) Restart computer
4) Plug phone into computer. Is it detected?
5) Repeat step 4 but after pressing volume down/power/home
6) Repeat step 5 but after using samsung USB jig (you have to buy it but it's cheap)
the samsung USB jig will try to 'force' your phone into the same mode that volume down/power/home does.
I would never ask a regular xda user this question but...
are you sure you have an N7000? does it have a home button? how many contacts are on the battery?
---------- Post added at 08:52 PM ---------- Previous post was at 08:49 PM ----------
Of course i'm sure that i have Galaxy Note N7000, the only issue is that i'm just new to the android world and i'm not familiar with the android terms like Root, Flash, Kernel and stuff like these and that's why i'm stuck here
But my question is why can't i go to the recovery mood normally like why pressing the home+power+volume down is not working for me?? btw i'm not in the united states and unfortunately i bought this phone when i was on a vacation and i'm in another country right now
i hate to say it but he updated to the latest stock and then tried to flash files from recovery.
it sounds to me like mmc_cap_erase bug
assuming, of course, that he doesn't have an i717 and flashed N7000 files over it.
which would just as easily brick
_______________________________________________________________________________________________________________________
OP all hope is not lost though, if you can get into download mode we can save your phone. on the other hand if you are under warranty, go to the Samsung store and tell them you tried to factory reset from stock and it wouldn't boot again (and nothing about rooting etc). you will not be under warranty if you are in the USA or Canada and have an N7000
sounds to me like your flash counter should still be 0
Click to expand...
Click to collapse
Of course i'm sure that i have Galaxy Note N7000, the only issue is me being new to the Android world and i'm not familiar with those terms like Root, Flash,Kernel....etc. i'm just wondering, is there a way so i can fix my phone??

Can you get into download mode or not.
Pull battery. Wait a minute. Put battery back in. Hold home power DOWN (not up)
Sent from my GT-N7000 using Tapatalk 2

asf58967 said:
Can you get into download mode or not.
Pull battery. Wait a minute. Put battery back in. Hold home power DOWN (not up)
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Unfortunately i can't

If you can't enter download mode then you're superbricked. You can repartition the chip which is a pretty advanced process and I imagine you'd struggle with it, or you can claim warranty. In future read the forums thoroughly before doing any sort of flashing, start with the stickies and make yourself aware of any and all issues before you flash.
Sent from my GT-N7000 using xda premium

not sure even the battery has any juice left

[ROM] CM11 for T-800

Here is a hacked cm rom for the t-800. I am NOT a dev, or anywhere near one. This rom has some issues that I CANT fix. Camera is rotated 90 degrees, and some other little ones i cant remember. ALL credit goes to @lonespeaker for the boot.img to make the t800 boot, and @eousphoros for his rom for the t-700. Please dont contact me with issues, as i wont be able to fix them. Im just sharing this, as I have had tons of pm asking for it.
You also need to install latest GAPPS
Rom
https://drive.google.com/file/d/0BwPAGUQCA8FDQVhiVU9GSGwyaVE/view?usp=sharing
BIG thanks to @eousphoros and @lonespeaker
Source code
* CyanogenMod
https://github.com/CyanogenMod
* Device specific repos
https://github.com/eousphoros/androi..._klimtwifi.git
https://github.com/eousphoros/androi...exynos5420.git
https://github.com/eousphoros/androi...exynos5420.gi

Ah thank you for this, looking forward to what the future holds.
Edit: I thought I'll add a list of bugs I've found so users know about them and know that suzook also knows but as said he is not a dev and can't fix them.
So if you can live with the following then download away:
Artifacts with animations - rotation of device animation and recents tab animation. Reduce animations in developer settings to 0.5 to make it hardly noticeable.
Recents button does not work at all, does light up though. Map action to home button long press.
Camera is rotated 90° off. Sometimes FC's
Softkeys do not vibrate, can't find the setting to turn on so assume the feature is missing.
That's all I've found for now.
Still better than touchwiz.

Thank you very much for your work!
I tried it and CM11 installs and boot up very well on my T-800.
Only one issue (besides of the things that are written) I have found is that there is no support for exfat for the external sdcard.
I think CM11 is really possible on the T-800 and T-805.

@suzook:
Have you tried repackaging CM11 from the Tab Pro 10.1 (https://download.cyanogenmod.org/?device=picassowifi) for the Tab S?
I think if you remap the target partitions in the installer script, it could flash correctly.
Perhaps you could ask @crpalmer for help on this one.
He's maintaining CM11 for the tab pro 10.1 which is quite similar to the tab s.

Dr. Hurt said:
@suzook:
Have you tried repackaging CM11 from the Tab Pro 10.1 (https://download.cyanogenmod.org/?device=picassowifi) for the Tab S?
I think if you remap the target partitions in the installer script, it could flash correctly.
Perhaps you could ask @crpalmer for help on this one.
He's maintaining CM11 for the tab pro 10.1 which is quite similar to the tab s.
Click to expand...
Click to collapse
Yes I have, it works perfectly except camera and ext SD card doesn't mount. If anyone wants, they can download nightly,replace boot.IMG from this ROM, along with the WiFi folder. It boots and works.
What we REALLY need is a custom kernel, as I believe that is our camera issue.

suzook said:
Yes I have, it works perfectly except camera and ext SD card doesn't mount. If anyone wants, they can download nightly,replace boot.IMG from this ROM, along with the WiFi folder. It boots and works.
What we REALLY need is a custom kernel, as I believe that is our camera issue.
Click to expand...
Click to collapse
Excellent news... Now we can stay up to date with CM11 upstream since the Tab Pro 10.1 is officially supported by CyanogenMod.
I think this is the start of something big for the Tab S users.
The Tab Pro kernel (boot.img) doesn't work?

Dr. Hurt said:
Excellent news... Now we can stay up to date with CM11 upstream since the Tab Pro 10.1 is officially supported by CyanogenMod.
I think this is the start of something big for the Tab S users.
The Tab Pro kernel (boot.img) doesn't work?
Click to expand...
Click to collapse
Well, I didnt try it. Im away from comp. Do you wanna give it a try? Worse case scenario is it wont boot, but you might have to odin back.

suzook said:
Well, I didnt try it. Im away from comp. Do you wanna give it a try? Worse case scenario is it wont boot, but you might have to odin back.
Click to expand...
Click to collapse
I also don't have access to a PC right now (vacation) for a few days.
The Tab Pro is using a generic exynos 5420 kernel so it will probably work. And if not, you should still have access to CWM to reflash the T800 kernel back.
I'd still strongly recommend that any testers have a PC with Odin and a stock ROM ready, just in case.
So any volunteers?

Sorry guys, new link up. The link i had was actually the latest nightly for the tab pro. New link up. Cam should be sorta working at 90degrees, and ext card should now be seen.

PS. The device specific repo links are truncated.

I try tomorrow to flash a Tab pro 10.1 nightly on my Tab S 10.5. I trust in a good TWRP Backup.
Edit: directly flashing from cm-11-20141011-NIGHTLY-picassowifi.zip (that's the actual nightly for the Tab pro 10.1) does not work. I get promptly the message "the rom is for picassowifi but this is chagallwifi". So the zip-file must be modified before flashing in any case.

hurray said:
I try tomorrow to flash a Tab pro 10.1 nightly on my Tab S 10.5. I trust in a good TWRP Backup.
Edit: directly flashing from cm-11-20141011-NIGHTLY-picassowifi.zip (that's the actual nightly for the Tab pro 10.1) does not work. I get promptly the message "the rom is for picassowifi but this is chagallwifi". So the zip-file must be modified before flashing in any case.
Click to expand...
Click to collapse
I think you'll need to replace the updater-script in the picassowifi.zip\META-INF\com\google\android with the T800 one (from the first post).
You can use 7-zip or winrar for this.
Didn't work for suzook.

Just tried flashin picaaso cm, it doesnt boot. gets stuck at samsung logo. This is why we need a custom kernel.
DO NOT FLASH>>>I HAVE A BRICK>>CANT GET INTO ODIN!

Can you get back into CWM?
Are you trying correctly?
Put tablet into download mode. [Hold power and vol down until text shows, then press vol up]

Dr. Hurt said:
Can you get back into CWM?
Are you trying correctly?
Put tablet into download mode. [Hold power and vol down until text shows, then press vol up]
Click to expand...
Click to collapse
Not sure wtf i was thinking flashing a boot.img from another device. As of now im bricked, and cant get into dl mode, so no odin for me. Bummer.

Dr. Hurt said:
Can you get back into CWM?
Are you trying correctly?
Put tablet into download mode. [Hold power and vol down until text shows, then press vol up]
Click to expand...
Click to collapse
Not sure wtf i was thinking flashing a boot.img from another device. As of now im bricked, and cant get into dl mode, so no odin for me. Bummer.

any updates?
Got into CWM or Download mode?
Edit:
vol up + vol down + power for 10 seconds = restart
As soon as it restarts quickly press and hold:
vol down + home = download

Dr. Hurt said:
any updates?
Got into CWM or Download mode?
Edit:
vol up + vol down + power for 10 seconds = restart
As soon as it restarts quickly press and hold:
vol down + home = download
Click to expand...
Click to collapse
Nope. just stuck at samsung screen, reboot to samsung screen.

Thats very sad and strange..
Download mode, when requested, starts before the kernel is even loaded so this is just strange.
Try some of those things listed here:
http://forum.xda-developers.com/showthread.php?t=1069032
- Connect via USB
- Make sure all USB drivers are installed
- Try different versions of odin
As a last resort, take it to a samsung service centre to get the software restored.
I've had that done once before (a few years back)!!

At my tests I am every time able to enter download mode or reset the Tab via power & vol down (and maybe the home button, but I'm not sure for this) for about 10-20 seconds (it was a very long time...).

Samsung Galaxy Tab A 8.0 Smoky Titanium (SM-T350) XAR/USA only!!!

If anyone needs help or advice, then post in this thread. I own this device and I have tried everything and I'll use that knowledge to those who need help. I am currently working on a Cyanogenmod rom for this device.

@Jonathan Kang
Spread your SM-T350 knowledge in this thread too if you can.

ParadoXGodzillA said:
If anyone needs help or advice, then post in this thread. I own this device and I have tried everything and I'll use that knowledge to those who need help. I am currently working on a Cyanogenmod rom for this device.
Click to expand...
Click to collapse
i'm new to this forum, but I've received an OTA update or maybe 4 updates and I'm wondering if I should take them? I just got this tab and it has T350XXU1BPE3 Marshmallow on it already. I would like to Root this and perhaps put a ROM on it, but I'm concerned about Samsung Locking the bootloader and keeping me from doing that.
The new updates are:
T350XXU1BPE3, T350XAR1BPE3, T350XXU1BPI2 & T350XAR1BPI1
Also, how do I root it and are there any good ROMs built for it?

wanb1i said:
i'm new to this forum, but I've received an OTA update or maybe 4 updates and I'm wondering if I should take them? I just got this tab and it has T350XXU1BPE3 Marshmallow on it already. I would like to Root this and perhaps put a ROM on it, but I'm concerned about Samsung Locking the bootloader and keeping me from doing that.
The new updates are:
T350XXU1BPE3, T350XAR1BPE3, T350XXU1BPI2 & T350XAR1BPI1
Also, how do I root it and are there any good ROMs built for it?
Click to expand...
Click to collapse
DISCLAIMER
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research of this topic on your own before you take a look at it. YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you, all, at the same time.
Ok, T350XXU1BPE3 is the XAR version. But anyways, you said you want to root it. There is no unlock bootloaders for Samsung Galaxy Tab A 8.
If you haven't, go to Settings > About Device > Build Number (tap it 7 times until it says Developer Mode)
You will see the Developer Mode settings on the settings bar. Click on that and CheckMark the USB debugging mode.
First: Go to this link and download TWRP for SM-T350 (Lollipop version of TWRP is better than the updated Marshmallow version of TWRP. The Marshmallow version of TWRP has many unsolved bugs.)
Flash this via ODIN. Download ODIN
Turn off your Samsung Device and then go to Download mode (Vol. Down + Power + Home Button) then plug in the USB to PC and the device. ODIN will say, Device Added! Press AP slot and find the TWRP file. Then press Start. It should say RESET OK! Then your device should reboot. If it says failed, REPLY BACK TO ME. These are the methods I have done it and it works awesomely.
Second: Download SuperSU
If you've downloaded the file from the PC transfer the file to any desired folder you want. (Ex: Downloads, Music, etc.)
If you've downloaded the file from the Tablet itself, you should be able to find the file in the downloads section, unless you changed the download file destination.
So turn off your device then go to Recovery Mode (Vol. Up + Power + Home Button) [Don't get mixed up with Download mode!!!]
Then, press the Install slot and locate the SuperSU file from your desired location and press the file. It should say, Do You Want To Flash This File? Swipe right to flash the file. After installing, don't Wipe Cache/Dalvik and Reboot Device. If TWRP asks you to install TWRP DON'T LET IT!!!
Your device should now reboot.
Congrats you have Root.
Reply back to me if you want a Permissive Kernel so you could use and download ViPER4Android for Music FX, and etc.
If you want to know how to install Xposed (for modules such as Youtube Background) reply back to me also. I have a SM-T350 and I would be appreciated to help you and others.
If you want a custom rom for this Tablet, reply back to me also.
I am making a Cyanogenmod for SM-T350, so hitting that Thanks button will contribute me to working harder for all of you guys.
Hit the Thanks button if I have helped you and others!!!
Peace out.

ParadoXGodzillA said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research of this topic on your own before you take a look at it. YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you, all, at the same time.
Ok, T350XXU1BPE3 is the XAR version. But anyways, you said you want to root it. There is no unlock bootloaders for Samsung Galaxy Tab A 8.
If you haven't, go to Settings > About Device > Build Number (tap it 7 times until it says Developer Mode)
You will see the Developer Mode settings on the settings bar. Click on that and CheckMark the USB debugging mode.
First: Go to this link and download TWRP for SM-T350 (Lollipop version of TWRP is better than the updated Marshmallow version of TWRP. The Marshmallow version of TWRP has many unsolved bugs.) Link: www.androidfilehost.com/?fid=24052804347801968
Flash this via ODIN. Download ODIN from here: http://odindownload.com/download/Odin3_v3.12.3.zip
Turn off your Samsung Device and then go to Download mode (Vol. Down + Power + Home Button) then plug in the USB to PC and the device. ODIN will say, Device Added! Press AP slot and find the TWRP file. Then press Start. It should say RESET OK! Then your device should reboot. If it says failed, REPLY BACK TO ME. These are the methods I have done it and it works awesomely.
Second: Download SuperSU from here: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.78-201609011115.zip
If you've downloaded the file from the PC transfer the file to any desired folder you want. (Ex: Downloads, Music, etc.)
If you've downloaded the file from the Tablet itself, you should be able to find the file in the downloads section, unless you changed the download file destination.
So turn off your device then go to Recovery Mode (Vol. Up + Power + Home Button) [Don't get mixed up with Download mode!!!]
Then, press the Install slot and locate the SuperSU file from your desired location and press the file. It should say, Do You Want To Flash This File? Swipe right to flash the file. After installing, don't Wipe Cache/Dalvik and Reboot Device. If TWRP asks you to install TWRP DON'T LET IT!!!
Your device should now reboot.
Congrats you have Root.
Reply back to me if you want a Permissive Kernel so you could use and download ViPER4Android for Music FX, and etc.
If you want to know how to install Xposed (for modules such as Youtube Background) reply back to me also. I have a SM-T350 and I would be appreciated to help you and others.
If you want a custom rom for this Tablet, reply back to me also.
I am making a Cyanogenmod for SM-T350, so hitting that Thanks button will contribute me to working harder for all of you guys.
Hit the Thanks button if I have helped you and others!!!
Peace out.
Click to expand...
Click to collapse
Wow! Thanks for all the detail! For future reference I have and know how to use Odin, ADB/Fastboot, etc. But I really appreciate your help! I don't have time tonight to do this, But I will on Wednesday and will get my Tab rooted with TWRP installed.
Just curious, is the CM your building Nougat by chance? That would be just too cool!
Thanks again!

wanb1i said:
Wow! Thanks for all the detail! For future reference I have and know how to use Odin, ADB/Fastboot, etc. But I really appreciate your help! I don't have time tonight to do this, But I will on Wednesday and will get my Tab rooted with TWRP installed.
Just curious, is the CM your building Nougat by chance? That would be just too cool!
Thanks again!
Click to expand...
Click to collapse
The CM rom should be based on Nougat. Also I would be porting the rom, so not really creating. Glad I helped! If you need any more help, just feel free to ask, that's what this thread is here for.

Those who need a [UNOFFICIAL] Rom for SM-T350. This is highly experimental and is under process of developing.
EVERVOLV (Not maintained by me but by @elginsk8r): http://forum.xda-developers.com/and...volv-galaxy-tab-sm-t350-t3411150#post67607709
Description: It is based on the AOSP project and it is running on a pretty much a Pure-Android experience.

TWRP for SM-T350: http://forum.xda-developers.com/galaxy-tab-a/development/recovery-t3426560
Download Lollipop version of TWRP because it works with Third-Party apps.
The Marshmallow version of TWRP is under development by @ashyx and is also not compatible with Third-Party apps yet.

Have you ever heard of ViPER4Android? In order to run with the best features, then you will need a Permissive Kernel. SeLinux Changer doesn't work with Samsung Marshmallow. (It worked with Lollipop though) In order to get a Permissive Kernel for SM-T350 go to this link: http://forum.xda-developers.com/galaxy-tab-a/development/kernel-galaxy-tab-sm-t555-5-8-2016-t3433560
It is not developed by me, I just put links that will be useful for SM-T350 users, but it was created by @ashyx. Flash it through ODIN!
Happy Flashing! (Please flash it after flashing TWRP if you haven't done so. Also, use the AP slot and choose the .tar file. If it is not extracted from .zip or some other file, extract it, if it's not a .tar)

ParadoXGodzillA said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research of this topic on your own before you take a look at it. YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you, all, at the same time.
Ok, T350XXU1BPE3 is the XAR version. But anyways, you said you want to root it. There is no unlock bootloaders for Samsung Galaxy Tab A 8.
If you haven't, go to Settings > About Device > Build Number (tap it 7 times until it says Developer Mode)
You will see the Developer Mode settings on the settings bar. Click on that and CheckMark the USB debugging mode.
First: Go to this link and download TWRP for SM-T350 (Lollipop version of TWRP is better than the updated Marshmallow version of TWRP. The Marshmallow version of TWRP has many unsolved bugs.) Link: www.androidfilehost.com/?fid=24052804347801968
Flash this via ODIN. Download ODIN from here: http://odindownload.com/download/Odin3_v3.12.3.zip
Turn off your Samsung Device and then go to Download mode (Vol. Down + Power + Home Button) then plug in the USB to PC and the device. ODIN will say, Device Added! Press AP slot and find the TWRP file. Then press Start. It should say RESET OK! Then your device should reboot. If it says failed, REPLY BACK TO ME. These are the methods I have done it and it works awesomely.
Second: Download SuperSU from here: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.78-201609011115.zip
If you've downloaded the file from the PC transfer the file to any desired folder you want. (Ex: Downloads, Music, etc.)
If you've downloaded the file from the Tablet itself, you should be able to find the file in the downloads section, unless you changed the download file destination.
So turn off your device then go to Recovery Mode (Vol. Up + Power + Home Button) [Don't get mixed up with Download mode!!!]
Then, press the Install slot and locate the SuperSU file from your desired location and press the file. It should say, Do You Want To Flash This File? Swipe right to flash the file. After installing, don't Wipe Cache/Dalvik and Reboot Device. If TWRP asks you to install TWRP DON'T LET IT!!!
Your device should now reboot.
Congrats you have Root.
Reply back to me if you want a Permissive Kernel so you could use and download ViPER4Android for Music FX, and etc.
If you want to know how to install Xposed (for modules such as Youtube Background) reply back to me also. I have a SM-T350 and I would be appreciated to help you and others.
If you want a custom rom for this Tablet, reply back to me also.
I am making a Cyanogenmod for SM-T350, so hitting that Thanks button will contribute me to working harder for all of you guys.
Hit the Thanks button if I have helped you and others!!!
Peace out.
Click to expand...
Click to collapse
I am now Rooted! Thanks for your help!
All I need now is a solid Marshmallow/Nougat ROM! How's yours doing? Let me know if you need a tester!

wanb1i said:
I am now Rooted! Thanks for your help!
All I need now is a solid Marshmallow/Nougat ROM! How's yours doing? Let me know if you need a tester!
Click to expand...
Click to collapse
Sure, I will help you, also have you checked out that EVERVOLV rom in the previous posts? Check that out and it is still in beta. It is not maintained by me, but by @elginsk8r. I, currently am working on a Nougat build which will be Cyanogenmod or maybe, I will make a new OS called AnKore (Korean if you move the An to the back of Kore, cause I am South Korean).
Anyways, good luck in the Android World now!

Good to hear that some body work on Android n for this device. Simple is the best.

Quick question will this work on a sm-t357t

You Can't read
temokk said:
Quick question will this work on a sm-t357t
Click to expand...
Click to collapse
Samsung Galaxy Tab A 8.0 Smoky Titanium (SM-T350) XAR/USA only!!! by ParadoXGodzillA

Whats the status on your rom?

ParadoXGodzillA said:
Sure, I will help you, also have you checked out that EVERVOLV rom in the previous posts? Check that out and it is still in beta. It is not maintained by me, but by @elginsk8r. I, currently am working on a Nougat build which will be Cyanogenmod or maybe, I will make a new OS called AnKore (Korean if you move the An to the back of Kore, cause I am South Korean).
Anyways, good luck in the Android World now!
Click to expand...
Click to collapse
Hey, do you have a built rom of Cyanogenmod for this model of tablet ready yet?
Please respond and in advance thank you when you do.

Rdrop said:
Hey, do you have a built rom of Cyanogenmod for this model of tablet ready yet?
Please respond and in advance thank you when you do.
Click to expand...
Click to collapse
Under progress, I have a lot of tests and quizzes for schools, stacked with homework too, so the project will be held back and probably will be finished by the end of February or during the summer. I am working very hard and I am putting more features than the original Cyanogen roms. I will announce after I finish.
@Xdevillived666
The status of the rom is:
Camera working
Themes are working sometimes and sometimes not
Home button is sometimes responsive
NavBar support
ViPER4Android working well (I don't like AudioFX that much)
Screen works perfectly, meaning it's responsive
Lag issues
Game rendering
Spoofing Google Play Store so you can install applications that are incompatible
Nougat Version AOSP, meaning untouched by any bloatware from Samsung
Gallery is unresponsive because of framework
Camera runs smoothly, but may need more options for photography
More to be added! This is just what is in my mind.

I followed the steps in the post above about rooting, but something isn't working correctly.
I installed Odin and flashed the tar file for TWRP. When I reboot into recovery (holding home, power, and up) I get the standard android recovery. I tried to flash the SuperSU file from there just in case and it fails with an invalid signature.
Is there something I missed along the way? I've flashed things with Odin before and didn't really see anything here that seems any different. The flashing in Odin was all boilerplate, passed and saw "RES OK" and the device rebooted.
My tablet is fine, but I can't installed SuperSU!
Thanks in advance.

ParadoXGodzillA said:
Under progress, I have a lot of tests and quizzes for schools, stacked with homework too, so the project will be held back and probably will be finished by the end of February or during the summer. I am working very hard and I am putting more features than the original Cyanogen roms. I will announce after I finish.
@Xdevillived666
The status of the rom is:
Camera working
Themes are working sometimes and sometimes not
Home button is sometimes responsive
NavBar support
ViPER4Android working well (I don't like AudioFX that much)
Screen works perfectly, meaning it's responsive
Lag issues
Game rendering
Spoofing Google Play Store so you can install applications that are incompatible
Nougat Version AOSP, meaning untouched by any bloatware from Samsung
Gallery is unresponsive because of framework
Camera runs smoothly, but may need more options for photography
More to be added! This is just what is in my mind.
Click to expand...
Click to collapse
If I were to try to port CM over to the t350 what device would I use for the port device?
Sent from my SM-T350 using XDA Premium HD app

glockman4519 said:
If I were to try to port CM over to the t350 what device would I use for the port device?
Sent from my SM-T350 using XDA Premium HD app
Click to expand...
Click to collapse
I'm sorry, I am not done with the CM, but what exactly do you mean, "what device would I use for the port device?"

Note 8 port for NFE

Note 8 port for S7/S7E/NFE (F) Variant
By MKUltraBlack
V1.0
https://www.androidfilehost.com/?fid=8889791610682879859
Needs fixed: Iris
????? Maybe more
Working: Secure folder
Applock
USSD codes
Infinity wallpapers
Edge lighting fixed for NFE screen
Game tools working
Air commands
Long press restart to boot to recovery
Bixby (should be)
This is my first blind port, I only own S7 Edge so I might need some logs from users to fix problems. I found 1 guy to help test so it does boot and work etc
The kernel is just stock NFE kernel with dmverity etc removed
It is just 1 rom zip that flashes, no aroma, and selects the correct files to add for NFE
I will update this thread with more details maybe pics if some people can send them to me as I obviously can't get screenshots from NFE as I don't have 1.
Please feel free to leave any problems you find, not a list of what mods you want added though. There are a lot of threads on xda to add volume mods, etc.
Remember this is only V1.0, I will try fix anything that doesn't work in later versions
Credits:
Special thank you to:
@Kill-Switch
For S7/S7E porting method and lots of other help including fixes
@ananjaser1211
For help with NFE method and updater script mods and NFE twrp for themed twrp
@corsicanu
For long press boot to recovery method and other help including fixes

******************
How to install
custom rom
******************
You will need:
*PC with Odin 3.13.1 or above
(https://samsungodin.com)
*TWRP .tar image for your model
Flat: https://eu.dl.twrp.me/herolte/
Edge: https://eu.dl.twrp.me/hero2lte/
*Rom
(Stored on external memory/sdcard)
*Unlocked OEM
To unlock OEM
********************************************
Go to settings, phone information, and tap build number until it says developer options unlocked, press back twice and go into developer options turn on OEM unlock
********************************************
1. Put your phone into download mode by turning your phone off, now press volume down, power and home key at the same time until the screen turns green, then release the buttons.
2. Open Odin on your PC and plug the USB cable into your phone and press volume up.
You will see it is connected to Odin, (there will be a blue rectangle saying com(number)
3. Select the AP section and load your TWRP .tar image in there.
4. Get ready to press volume up, home and power button at same time on your phone now press start on Odin, it will only take a few seconds, as soon as the box goes green and says pass, press the volume up, home and power button combo until TWRP splash screen shows up on your phone screen. Now release button combo and unplug USB cable from your phone.
5. In twrp press wipe, then format. A keyboard will appear, type yes and press enter. Now press back to go to TWRP main screen and press reboot and select reboot to recovery. It will now reboot back into TWRP.
6. Press wipe again, then format, type yes, press enter. (Do this 3 times)
Press back to go to TWRP main screen and press wipe, select advanced wipe, check all boxes apart from OTG and SDCARD and swipe. (Do this 3 times)
Press back to go to TWRP main screen and press wipe then swipe to factory reset. (Do this 3 times)
********************************************
Your phone is now completely clear with no operating system and ready to flash a custom rom. When you downloaded your rom, you stored it on your sd card or external storage, you need to do this as when you do all the wipes it wipes your internal storage but not your sd card, that's why it says in advanced wipe don't check the sd card or OTG boxes.
********************************************
7. Press back until you go to main screen in TWRP and select install, select storage, external (sd card) and select the rom zip. Now just swipe to flash.
Normally it will go into aroma which contains check boxes of extra items to add into the rom, this rom however is a straight flash, it will automatically detect your phone model and select the correct kernel and battery capacity. It will say Installation finished when done. Now go back to main twrp screen and select reboot and press system. The phone will reboot, leave it 10-15mins to allow it to load the rom, be patient. Then you will be at the set up page just like starting a new phone. Set up from there and enjoy the rom.
Sent from my Note 8 using XDA Labs

Reserved also
Sent from my Note 8 using XDA Labs

I have also done a OneUI night mode themed twrp using @ananjaser1211 new 3.4.0 twrp.
Again if you spot any errors please contact me and I will sort them out.
Just flash the .img in twrp to recovery section and reboot to recovery.
Link:
https://www.androidfilehost.com/?fid=8889791610682879875
Sent from my Note 8 using XDA Labs

Gonna give this a try
Sent from my SM-G965F using Tapatalk

Nice

After flashing says No OS installed
Sent from my SM-N975U using Tapatalk

Nice work bro,keep it up

butchieboy said:
After flashing says No OS installed
Click to expand...
Click to collapse
What order did you do it in? That sounds like you wiped everything after installing the rom.
Follow the instructions in post 2
Sent from my Note 8 using XDA Labs

Lol nope, I know better then that. Flashed it twice back to back same results
Sent from my SM-N975U using Tapatalk

butchieboy said:
Lol nope, I know better then that. Flashed it twice back to back same results
Click to expand...
Click to collapse
Did it give an error when flashing
Also what version of Note Fan Edition do you have, F?
Sent from my Note 8 using XDA Labs

Yeah got bootscript error. I have F version Note FE
Sent from my SM-N960U using Tapatalk
Never mind I think I got it figured out.

butchieboy said:
Yeah got bootscript error. I have F version Note FE
Sent from my SM-N960U using Tapatalk
Never mind I think I got it figured out.
Click to expand...
Click to collapse
What is bootscript error, was there a number of something like script ended with error 7
The rom and Kernel are based on F variant. Did you use the new TWRP as well

Using Anans Twrp..sorry about that he knows about the error. Got it sorted out and flashed, Magisk installed. Navigation buttons have no back light on NoteFe F version. Using in United States on At&t. Text working fine. Testing call quality shortly.View attachment 5049861
Sent from my SM-N950F using Tapatalk

hello bro @MKUltraBlack, how did u make secure folder work in ported rom ?
i ported hades rom v12 from note 8 to note fe but cant make secure folder work,,
i already replace ccm smali from note fe to note 8 services.jar but still cant make it work..
im very need secure folder work again..heehe

jaran kepang said:
hello bro @MKUltraBlack, how did u make secure folder work in ported rom ?
i ported hades rom v12 from note 8 to note fe but cant make secure folder work,,
i already replace ccm smali from note fe to note 8 services.jar but still cant make it work..
im very need secure folder work again..heehe
Click to expand...
Click to collapse
There is a thread for secure folder mod on xda:
https://forum.xda-developers.com/galaxy-note-8/development/secure-folder-patch-custom-rom-t3949878
This thread is for my rom, not general help.
If you need help porting a custom rom to another model first make sure you have the original devs permission, then ask that dev what they have done to modify their files
Sent from my Note 8 using XDA Labs

MKUltraBlack said:
There is a thread for secure folder mod on xda:
https://forum.xda-developers.com/galaxy-note-8/development/secure-folder-patch-custom-rom-t3949878
This thread is for my rom, not general help.
If you need help porting a custom rom to another model first make sure you have the original devs permission, then ask that dev what they have done to modify their files
Sent from my Note 8 using XDA Labs
Click to expand...
Click to collapse
i read all guide there and do it what they write,,but still cant make it work,, i change ccm from stok to port,,i ask the dev but may be he is busy..
i port it and use it for my self..i never share anything without their permission,.

Hello, anyone has tested this rom?
SecureFolder works right???

mclongthanh said:
Hello, anyone has tested this rom?
SecureFolder works right???
Click to expand...
Click to collapse
Yes secure folder works, iris recognition doesn't.
Read first post for details
Sent from my Galaxy S9+ using XDA Labs

Working on my N935S, this is awesome. Thanks OP!