Hey guys,
i´ve a question: Is your fingerprint-button uneven too? When you keep your p20 / the fingerprint-button in light, on the left site from button it´s like uneven. The surface isn´t flat.
In the picture you can see, how big the uneven surface is.
Greets from germany
bilder-upload.eu/upload/440667-1524085711.png
Mine is all good!
P.S I can't see your picture...
Related
Not sure if anyone else has noticed or has this but when my screen is off it looks like there is fluid or something on the inner part of the screen. Almost like grease looks like on water .
Any ideas anyone.
Same problem here! It´s only in the middle of the screen - (1 cm border) - the same for u?
you can only notice it when you tilt the screen to a light! you dont see it in the dark..
It's probably just the screen protector...
I honestly cannot see anything like grease on water below the screen when the phone is off. Possibly because all I see is grease on the screen from my fingers.
its just where the original screen protector was on it. I had the same. 1cm border arround screen. just give it a good scrub with a soft pollishing cloth to get it off
joel78 said:
Same problem here! It´s only in the middle of the screen - (1 cm border) - the same for u?
you can only notice it when you tilt the screen to a light! you dont see it in the dark..
Click to expand...
Click to collapse
Yea , same for me . Sorry but its not where the sreen protector is as it has never had one being tempered glass.
Hmm sounds like a warranty return then
it should have been a protector there. sure it's tempered glass, but the digitizer on top of it is plastic.
same problem
I have the same problem on the middle of the screen: 1cm x 2cm area.I can see it with dark background. If I tick this area with the stylus, it moves like some fluid.
I will try to take photos later.
Its under the glass , there is no screen protector on the device. My camera is broken so hopefully some photos will come up later
I have the same problem on my "original Touch" - I noticed that it's visible only when screen is pointed to some polarized light (for example laptop display, fluorescent tubes in subway). In the subway I can hardly read the text. Under the sunlight or under the normal bulb it's not visible (or barelly visible from very sharp angle).
I heard there is some polarization film under the plastic-glass that can get released and make this liquid effect.
My friend noticed this even on his Eten x500+, but not so bad.
This was one of the reason I get my Diamond - because I need to send Touch for warranty repair.
It's a bad news that this problem persists on Diamond
look at this http://forum.xda-developers.com/showthread.php?t=293311
Yea I think the last user is probably right . I keep it in my jeans front pocket so it could be presure on the screen.
I know I have seen someone else had this issue with the Diamond I can see the light coming out from around the lens on the phone but only on one side, is this something that can be fixed or should I return the phone? Sorry I searched and seached and can't find where I read about this.. Thanks to anyone that can help..
Front lense? You mean front screen? Like light coming out from the edges of the screen?
yup mine has light leaking from the right side of the screen (NOT LENS!)
front screen
Yes I am talking about the front screen it is the left side it looks as if teh glass is lifting on the left side and the light is ecasping so is there a way to click it back in place without breaking it? Thanks
Same here. Unless you want to brave voiding our warranty by taking it apart, I would exchange the phone. I'm definitely returning mine this week. I can already foresee moisture getting in there and screwing up the screen.
isnt this normal?
every set got this issue
anyone here doesnt have this issue?
Btw i'm using Touch Pro, not Diamond
So are you saying that the light around the screen is suppose to be normal I can't see it being a good thing for the phone at all..
Hi, I bought my 4X last couple of days.
Im very happy, but now I have one question about display.
I was surfing on the internet and I noticed that on top of the display, there is slightly brown or yellowish tint
Its visible on white or light grey background.
I noticed it isnt on LCD panel becasue when I look closer or in another angle the effect like disappeared.
It looks like sea-bow effect or glass reflection on gorilla glass or something similar but only with yellowish tint.
I red in reviews that the display is in some distance from glass, maybe there is slightly color distortion between glass and display?
My build is 1.1
Did you notice something similar on your 4X? Is it normal? Maybe Im too sensitive?
Thanks in advance.
So, I try to look at the display with white background in the dark room and I can definitely notice sea-bow or reflection on the glass. Its changing the position when I change the angles during the view on display. Anyone notice this? Would be very appreciated.
Yes, i seen to. But it's a very light effect. Is not a problem for me. If you don't advertise this to me I would not seen it.
Anyone other noticed this issue? Thanks.
smoke2 said:
Anyone other noticed this issue? Thanks.
Click to expand...
Click to collapse
To be honest, no. I tried to do in your way, I'm not blind, but I simply don't see nothing abnormal in mine Optimus 4X HD.
I have this problem too, and my Optimus 4x is 3 months old. Maybe it is cause by the overheat problem? Since the phone heat up mostly at the top part when playing games or browsing.
It could be that when the phone heats up, the glue melts and the screen gets "dirty" or its because of screen bleeding or because of pixels getting damaged because of the heat.
I also do notice it. Try to look at the phone at a very steep angle, I see that my screen has a blue tint on the bottom and a weird other tint on the upper side. I bought my phone on march 2013 Only noticable on white backgrounds.
Good afternoon for all! I need your help! Yesterday I accidentally dropped my phone and when I looked at the screen I noticed two little problems, it works perfectly, but it has one dark scratch and a little dark spot, but I don't know if they are in the Touch Panel (Or Gorilla Glass, I don't Know) Or they are in the LCD Panel. The Scratch looks dark in front, but if you look putting the phone aside, it illuminates and looks white. The Dark spot becomes larger if you apply pressure. This two problems are almost not noticeable until I open White or Clear colors screens.
I would be very grateful if someone could help me to know from where is the problem, the Digitalizer or from the LCD. Sorry for my bad english! I Still learning!
It's the LCD, i had the same problem with my phone.
Thank's!
Hakkinan said:
It's the LCD, i had the same problem with my phone.
Click to expand...
Click to collapse
Really? :/ Thanks bro, do you know how much do they cost? (The digitalizer and the LCD?
ejsmsupersoyelm said:
Really? :/ Thanks bro, do you know how much do they cost? (The digitalizer and the LCD?
Click to expand...
Click to collapse
I have no idea bro, fortunately i got a replacement.
I noticed that tilting the screen if my S10+ make the white turn a little bit into pink... anyone else? It's really really barely noticeable. I have leaved on original screen protector and since to me for now is fitted perfectly on the screen, I don't want to take it off only to check that it's the cause of this kind of "rainbow effect ". Someone else could check it?
Sorry for my english...
Yeah, noticed the same. My S9+ don't have it. Also S9+ screen is is more white compared to S10
Have peeled screenprotector of but stays the same. Screens looks better though without protector.
My S9+ also have more "white" screen compared to this S10+, however screen shifted a little bit to blue/green if tilted...
I've noticed it as well on my S10e without the screen protector. Not that noticeable and not as bad as the Pixel 3 but once you see it, you can't un-see it
Could be wrong but OLED/AMOLED have this trait - not issue but rather if screen is tilted it will have a red/pink hue - same when I had a Mate 20 Pro and while the same its less noticeable on S10+ ( better panel maybe )
Blacks are spot on but whites aren't perfect.
So i think i will leave the screen protector on until i'll have to replace it...
I have this issue too, TMobile US. But only towards the bottom portion of the screen, the top part is fine. Which leads me to believe it's a defect in my particular case. It's very distracting. Also fingerprint sensor works whenever it feels like.
Have to return it now.
Rick1vr6 said:
I have this issue too, TMobile US. But only towards the bottom portion of the screen, the top part is fine. Which leads me to believe it's a defect in my particular case. It's very distracting. Also fingerprint sensor works whenever it feels like.
Have to return it now.
Click to expand...
Click to collapse
Mine is different, i notice this pink/purple hue only tilting the screen more than 30 deg in any direction, if i look at it straight, whites are perfect.
Mine is the opposite , I keep blue light filter on all the time and the Samsung screen gaurd
When tilt i get a greener tinge
Just looks normal, tilt any screen or look at it from oblique angle things look differently
Sent from my SM-G975F using Tapatalk