Database Develop

Has anyone tried this charger?

My dog ate my charger and I'm looking to buy this one till I order a new one. Anybody have any thoughts on it?
http://www.bestbuy.com/site/insigni...lack/5690015.p?id=1219148349637&skuId=5690015

Seems like it would work but there are two things i would like to point out. First this is not a quick charge 2.0 charger so fast charge will not work with it, it will charge at normal rate. Also for myself i try to get wall chargers with removable cables just in case my pet eats thru it I can replace them easily and trust me i have gone through 4 cables in the last 4 months. That said i have had good experiences with ones bought from Ebay as well since the prices are far too tempting.

Is rapid charge the same as quick charge?

blane3298 said:
Is rapid charge the same as quick charge?
Click to expand...
Click to collapse
Usually not at all. What people claim as "rapid charge" is just a small increase in amperage (usually 2+ amps). By reference, USB 2.0 spec is 500mA.
Quickcharge 2.0 increases both the voltage and the amperage it can supply (is. even more wattage). The exact values are negotiated by the phone and what it draws - which is dependent on the current phase of charging.

Here's the exact same one we got with our note 4, OEM and everything! Plus it's way cheaper than the insignia one
http://www.amazon.com/Samsung-Adaptive-Charger-Qualcomm%C2%AE-Technology/dp/B00TEUVEIO/ref=sr_1_1?ie=UTF8&qid=1433819960&sr=8-1&keywords=samsung+fast+charge

Cuppeerr said:
Here's the exact same one we got with our note 4, OEM and everything! Plus it's way cheaper than the insignia one
http://www.amazon.com/Samsung-Adaptive-Charger-Qualcomm%C2%AE-Technology/dp/B00TEUVEIO/ref=sr_1_1?ie=UTF8&qid=1433819960&sr=8-1&keywords=samsung+fast+charge
Click to expand...
Click to collapse
That's the one I've been looking at as well but some of the comments claim it's fake. I know it's not a huge risk at 13 dollars but still kind of apprehensive.

This is the one I've been using and it's fantastic.
http://www.amazon.com/Qualcomm-Cert...pebp=1433829116966&perid=0N8X3T7X2AQ168Q9Q67B

You guys are awesome! Definitely ordering the aukey one when I get home

I ended up getting these. Good reviews (samsung users reported that phone identified using fast charger connection) and decent prices.
http://www.amazon.com/gp/product/B00W9XLPBE?redirect=true&ref_=ya_st_dp_summary
http://www.amazon.com/gp/product/B00TDC0WJA?redirect=true&ref_=ya_st_dp_summary
I'll report back here after testing them Friday went they arrive! Eeeek! I'm excited lol!

Just got the chargers. All seem to work well and indicate fast charging via phone. Will report back if they fail or anything unexpected.

Can I use the fast charging brick with another cord and have fast charging?

Which charger to use with Nexus 6? (no quickcharge)

Which charger to use? (no quickcharge)
I bought a Samsung charger for my upcoming Nexus 6, i don't want to use the quick charger that comes with the phone. I am starting to suspect that this one is also a quick charger, can anyone look at the attached pictures and tell me? Also if it isn't a quick charger i would like to use it for the long run so my second question is would my battery be affected because of what says on the back of the box that i highlighted? In the highlight are also the specs of the charger, can someone clear this up for me?
EDIT: I cannot post pictures on the forum just yet, so here are the specs
10W Samsung travel adapter, Input 100-240VAC 50-60Hz, Output 5.0VDC 2A
Use only with compatible Samsung devices

mohijavata said:
I bought a Samsung charger for my upcoming Nexus 6, i don't want to use the quick charger that comes with the phone. I am starting to suspect that this one is also a quick charger, can anyone look at the attached pictures and tell me? Also if it isn't a quick charger i would like to use it for the long run so my second question is would my battery be affected because of what says on the back of the box that i highlighted? In the highlight are also the specs of the charger, can someone clear this up for me?
EDIT: I cannot post pictures on the forum just yet, so here are the specs
10W Samsung travel adapter, Input 100-240VAC 50-60Hz, Output 5.0VDC 2A
Use only with compatible Samsung devices
Click to expand...
Click to collapse
2 amp will deliver 2 amp, which is what the turbo charger will deliver, so yes it will turbo charge. Why don't you want to turbo charge?

danarama said:
2 amp will deliver 2 amp, which is what the turbo charger will deliver, so yes it will turbo charge. Why don't you want to turbo charge?
Click to expand...
Click to collapse
I want to use the phone for a couple of years and don't want to shorten the battery life and also have the risk of inflating battery and everything that comes with it. What kind of charger should i buy to charge it in some "normal" time? The salesman in Samsung store told me this one charges Note 4, Galaxy S5 - which is why i bought it - the S5 doesn't have the quickcharge tech so i instantly thought it was an ordinary charger. On the other hand, my Galaxy Nexus official charger is rated for 1.0 A which surely isn't strong enough to charge the 6 properly so i am confused with what kind of a charger and with what ratings should i get? Thank you in advance.

mohijavata said:
I want to use the phone for a couple of years and don't want to shorten the battery life and also have the risk of inflating battery and everything that comes with it. What kind of charger should i buy to charge it in some "normal" time? The salesman in Samsung store told me this one charges Note 4, Galaxy S5 - which is why i bought it - the S5 doesn't have the quickcharge tech so i instantly thought it was an ordinary charger. On the other hand, my Galaxy Nexus official charger is rated for 1.0 A which surely isn't strong enough to charge the 6 properly so i am confused with what kind of a charger and with what ratings should i get? Thank you in advance.
Click to expand...
Click to collapse
2amps isn't going to shorten the life below 2 years. Higher amps only shorten life if they are above battery tolerances, which 2 amps is not.
Anyway, you'll want a 1 or 1.2 amp charger for slow charging

danarama said:
2amps isn't going to shorten the life below 2 years. Higher amps only shorten life if they are above battery tolerances, which 2 amps is not.
Anyway, you'll want a 1 or 1.2 amp charger for slow charging
Click to expand...
Click to collapse
Can i use this charger safely with the Nexus 6? After some researching this one is actually quickcharge 1.0 by the specs so i it should not be so "harsh" with the temperature on the phone.

mohijavata said:
Can i use this charger safely with the Nexus 6? After some researching this one is actually quickcharge 1.0 by the specs so i it should not be so "harsh" with the temperature on the phone.
Click to expand...
Click to collapse
Yes.

If I were you, I would use the charger that comes with the Nexus 6. Which is tested by Motorola to work properly. I've had my Nexus 6 since December 2014 and no problems. I charge through my laptop will at work though.

logicrulez said:
If I were you, I would use the charger that comes with the Nexus 6. . .
I charge through my laptop will at work though.
Click to expand...
Click to collapse
He wants slow charging. So charging through laptop / pc will be fine.
Charge cspacity of usb ports is 500 mA (900 mA for USB 3.0), that's good for slow charging.
Also 1-dollar charger from eBay will be fine.

NLBeev said:
He wants slow charging. So charging through laptop / pc will be fine.
Charge cspacity of usb ports is 500 mA (900 mA for USB 3.0), that's good for slow charging.
Also 1-dollar charger from eBay will be fine.
Click to expand...
Click to collapse
He wants it but hasn't got a valid reason to want it. The motorola charger is the best charger to use and it won't shorten his battery life.

danarama said:
He wants it but hasn't got a valid reason to want it. The motorola charger is the best charger to use and it won't shorten his battery life.
Click to expand...
Click to collapse
And slow charging won't lengthen it.;(

NLBeev said:
And slow charging won't lengthen it.;(
Click to expand...
Click to collapse
Nope. So the only thing that will change is his phone will take longer to charge.
That said for me, turbo charge stopped working and I'm very annoyed.
Google have first sent me a new charger which still hasn't arrived. Though I think the issue is the phone. But I wanted to avoid a refurb as long as possible. Can't live without turbo charge now.

I have this charger, http://www.walmart.com/ip/Belkin-F8J031TT04-BLK-Micro-Wall-car-Chrg-Kit-2.1a-10w-W-4ft/40457559, but i got just the charger for $20. It most definitely doesnt turbo charge, it takes atleast 2 hours, so id say its a "normal" charge for this phone and i think its better than the turbo charger, because it doesnt get hot and its still decently fast

danarama said:
. . .
Google have first sent me a new charger which still hasn't arrived. Though I think the issue is the phone. But I wanted to avoid a refurb as long as possible. Can't live without turbo charge now.
Click to expand...
Click to collapse
The turbo output is only supplied on turbo enabled devices. So there is something wrong with switching to turbo modes 9 V and/or 12 V
I am curious what is the cause of this issue.
Did you try an 'charge app' like Ultra Fast Charger.?

NLBeev said:
The turbo output is only supplied on turbo enabled devices. So there is something wrong with switching to turbo modes 9 V and/or 12 V
I am curious what is the cause of this issue.
Did you try an 'charge app' like Ultra Fast Charger.?
Click to expand...
Click to collapse
I think its a usb port issue myself.
I don't know what a charge app is. I am monitoring my input though. I know the issue is not software as it just stopped working one day last weekend with no software changes.
Actually,.could even be the battery as.my wireless charger is very slow now too.

danarama said:
I think its a usb port issue myself.
I don't know what a charge app is. I am monitoring my input though. I know the issue is not software as it just stopped working one day last weekend with no software changes.
Actually,.could even be the battery as.my wireless charger is very slow now too.
Click to expand...
Click to collapse
There are some apps in the play store claiming to boost the battery charge.
When wireless charging is also slow, than it could be indeed the battery.
Maybe a complete discharging ?
BTW
Turbo mode is only active when the battery is less than 75% charged.

NLBeev said:
There are some apps in the play store claiming to boost the battery charge.
When wireless charging is also slow, than it could be indeed the battery.
Maybe a complete discharging ?
BTW
Turbo mode is only active when the battery is less than 75% charged.
Click to expand...
Click to collapse
I don't believe they can but I'm not.going.to try anyway.

You should use a 5 Volt 2 Amp charger, those chargers are the one's that most phones use. Most new phones are using Qualcomm's Quick Charge 2.0, which you should use but if you are not comftorable then the 5 Volt 2 Amp will work good.

Errr, QuickCharge will in fact degrade a battery faster, it's still used because most phones only have a 2 year lifespan.
A non QuickCharger will also make it run less hot while charging and also be less likely to cause cell expansion. Not sure why there's so many people denying this.
EDIT:
Including some sources:
http://www.sciencedaily.com/releases/2015/04/150414094117.htm
Please don't tell him that it won't degrade his battery when it definitely will. It's basic chemistry.
To OP:
Any regular non Quick USB charger of reputable make will do fine. I use an older HTC charger. Don't get a super cheap offbrand one as it probably has fluctuating voltage which will also damage your battery.

seshmaru said:
Errr, QuickCharge will in fact degrade a battery faster, it's still used because most phones only have a 2 year lifespan.
A non QuickCharger will also make it run less hot while charging and also be less likely to cause cell expansion. Not sure why there's so many people denying this.
EDIT:
Including some sources:
http://www.sciencedaily.com/releases/2015/04/150414094117.htm
Please don't tell him that it won't degrade his battery when it definitely will. It's basic chemistry.
To OP:
Any regular non Quick USB charger of reputable make will do fine. I use an older HTC charger. Don't get a super cheap offbrand one as it probably has fluctuating voltage which will also damage your battery.
Click to expand...
Click to collapse
Actually you've misread (or not read fully). No one disputes the science. That article isn't accurate. All it says is "too quickly" and if you read what I have said, is that the turbo charger is within acceptable tolerances. I.E. It is not "too quickly"

danarama said:
Actually you've misread (or not read fully). No one disputes the science. That article isn't accurate. All it says is "too quickly" and if you read what I have said, is that the turbo charger is within acceptable tolerances. I.E. It is not "too quickly"
Click to expand...
Click to collapse
I think you're not understanding the basic chemistry. More heat = more degradation of the Li-ion battery, regardless of tolerances. A lower power charge will always degrade the battery slower. This isn't about tolerances.

Anker PowerIQ inconsistent charging

Has anyone had issues using Anker PowerIQ chargers with the Nexus 5X? I've purchased an Anker 2nd Gen Astro E4 13000mAh 2-Port (3A Output) and when connected to the Nexus 5X it keeps connecting and disconnecting. It does not appear to be a cable issue (my old 2A charger works fine through the same cable). Meanwhile the Anker charges the old Nexus 5 without any issue - it's just the Nexus 5X that seems to experience problems.
I'm wondering whether it's Anker's PowerIQ having trouble working out the correct power draw for the Nexus 5X. If anyone's had similar issues with PowerIQ or other chargers, I'd love to hear potential fixes or confirmation that I'll need to switch it out for something else.

I have encountered the exact same issue with the Anker Astro E4 battery. At first I figured it was the cheap Aliexpress USB-A to C cable I was using, but I think you're onto something about the PowerIQ not knowing how to negotiate with the 5X correctly. I contacted Anker Support on Twitter yesterday and was told to contact [email protected] about the issue. I haven't yet pursued that avenue, but I'll update once I have.

I don't think I have any issue with my PowerIQ non-quick charging 6 port desktop charger or 2-port battery park (15600 mah)

I have the same issue with my Nexus 5X. After I posted a negative review due to this on Amazon, Anker reached out to me and has shipped one of their 4 port chargers which they think will resolve the issue. We shall see...

It still could be a cable issue. The difference is that your Anker may contain smarter charging tech inside and it is self regulating what the cable is asking for (possibly 3A) when it cant really deliver that. With your other charger, it is possible it is blindly delivering an overcharge for its rated max and may brown out soon if not over time.

minnemike said:
It still could be a cable issue. The difference is that your Anker may contain smarter charging tech inside and it is self regulating what the cable is asking for (possibly 3A) when it cant really deliver that. With your other charger, it is possible it is blindly delivering an overcharge for its rated max and may brown out soon if not over time.
Click to expand...
Click to collapse
In my case, I'm 99% certain it's not the cable, as I'm using an OEM / Google A->C cable.

Andeh23 said:
In my case, I'm 99% certain it's not the cable, as I'm using an OEM / Google A->C cable.
Click to expand...
Click to collapse
Does fast charging display with that cable?

fosser2 said:
Does fast charging display with that cable?
Click to expand...
Click to collapse
I honestly don't know, as I don't have an OEM type A wall charger to test it with. I would assume so, since it came from Google. I did receive Anker's 4 port car charger last night, but need to wait until this evening commute (once my battery drains) to see whether it works. Plugging it in this morning showed just "charging" when I was at 98%, but it wasn't cutting in and out like the 2 port one was.

Andeh23 said:
I honestly don't know, as I don't have an OEM type A wall charger to test it with. I would assume so, since it came from Google. I did receive Anker's 4 port car charger last night, but need to wait until this evening commute (once my battery drains) to see whether it works. Plugging it in this morning showed just "charging" when I was at 98%, but it wasn't cutting in and out like the 2 port one was.
Click to expand...
Click to collapse
My OEM cable is on its way as well. If you get a chance to test it on a different charger later on, please post the results. I would love to see that OEM cable say "charging rapidly."

Followup: I tested the Anker 4 port charger with the OEM Google A->C cable, and it does register as "charging rapidly." Using Ampere, I measured 1340 mA / 4.08 V peak to it. I also tested my new Tronsmart charger (with built-in USB C cable), which measured 1710 mA / 3.903 V peak.

I have same disconnect issues with aukey quickcharge battery pack

After a little back and forth with Anker email support, they are sending me an Anker PowerCore+ 10050 USB-C Battery Pack as a replacement for the Astro E2 not charging the 5x correctly - at no charge! Very impressed. It's been shipped but I haven't received it yet - from what I can tell spec-wise it has native USB Type C and A ports, but I can't yet confirm if this can fast charge the 5x at the same output as the stock wall charger.
I'll report back once I've had time to test.

sounds like an combo issue of the cable and battery pack/charger.
have you guys seen the thread about a google engineer (benson leung) reviewing usb -c cables?
basically usb-c standard cables should have a resistor in them which the phone uses to detect if the charger is able to supply 3A or not. without this (most cables seem to not have this, including the oneplus one) the phone thinks it can draw 3A and tries to do so. this can result in damaging you charger as that is more than it can produce. but apparently it can also damage components in your phone as the current it thinks it is receiving is higher than the actual current being received.
The disconnection issue sounds like the charger has a protection mechanism and realizes the phone is trying to draw more power than it can provide, so it cuts off to prevent overloading.

I tried the PowerDrive 2 and it has the same isse where it charges for a few seconds, stops, then charges for a few seconds, etc. I emailed thier support but have not heard back.

I have the same issue with Aukey PA-12, tried two different cables. The charger works fine with my wife's quick charging phone.... I hope it is a kernel issue that can be fixed. The original Google charger works flawlessly.

Mi5 and QC with original charger+cable - What values expected in apps like Ampere?

Hello everyone,
Ever since I got this Mi5 (125GB 4GB version) I've been trying everything I can so see it its behavior matches what is advertised. I should start off by saying so far so good.
Coming from a Moto X xt1092 I was used to some sort of indication that I was plugged to a QC enabled charger, not just a regular one. On this Mi5, however, and keep in mind that I'm under Lineage OS, I have no indication. I can count the minutes it takes to fill up a dead battery or maybe just 50% percent of it, but I'd like a sure and bullet proof indication. Also keep in mind that I'm using the original charger and cable - said charger that has the QC symbol on it.
Reading other threads, I noticed some posters were advised apps like Ampere - which I installed. Now, what kind of values should I expect from the app when charging? As of now, it hits a maximum of 1610 mA. What should I be looking at and what are the cutoffs above which I can be sure it's quick charging, as opposed to just regular charging?
Thank you in advance.
Added info: just set it to charge at 4%. 38 min later it was at 29%. It seems to me that 25% in 38 min is below QC 3 or even 2 standard (as it is often said that despite the mi5 being QC3 compatible, the original charger is QC2).

So, any chance one of you mi 5 owners can grab that app and give me some reference numbers? Just so I know for sure that I need to try and get a refund for the charger the phone shipped with.

4.1260 V
2860 mA
Edit
Miui 8.2 by xiaomi.eu
7.2.9 beta weekly
Mi5 64/3gb

Thank you.
Yeah that's way higher higher​ than what I'm getting. Also, under technology I have "Li-ion", and a much lower Voltage.
Weird.
Something is definitely up.

zoejo said:
Thank you.
Yeah that's way higher higher​ than what I'm getting. Also, under technology I have "Li-ion", and a much lower Voltage.
Weird.
Something is definitely up.
Click to expand...
Click to collapse
the brick you get in the box is qc2. The device supports qc3 though and if the device is hot it will go upto 1610ma only buy a qc 3 brick roughly your charge should be done in 1hr 15-1hr 30 minutes

I knew the charger was qc2, I just thought it would go higher than 1610, which is exactly the top mA registered. Thanks for that info - I guess there's nothing wrong with it.
I have a qc3 charger on the way too.

The shipped charger has max current of 2.5A and indeed, during the first 10% ampere shows value near that (23XX mA on my phone). It will then gradually decrease down to 0.01A when the capacity is above 95%. Using real QC 3.0 charger (I have both Tronsmart and Aukey), the first 10% it can reach 28XX mA. The ending is similar, though.

I use the stock charger and cable that came in the box. I bought it here in macedonia. But i dont have an idea for wich market it is destined. I can confirm that it charges the phone to 85-90% in less than an hour, then it gets slow as stated above

Yeah I don't get those times, not even nearly. As you can see from the screen shot it took about two hours, most of which with screen off and no activity.

Do you have the same oem charger that i pictured above?

try to use different cable or different charger like aukey or tronsmart..
FYI original charger which support QC 3.0 Just MDY 08-EH

Azzam_Farid said:
try to use different cable or different charger like aukey or tronsmart..
FYI original charger which support QC 3.0 Just MDY 08-EH
Click to expand...
Click to collapse
No only mainland china mi5 ships with QC 3 other regions where mi5 is sold only gets qc2 charger Google it if you want

Well mine was bought in Macedonia (south east europe) and i got a qc 3.0. indeed it is not with a local standard socket so i use a smalla dapter for the plug, but the point is that it depends to wich parts of the world xiaomi "officially" export, and to wich parts of the worlds (most of them) local companies undertake an adventure to import a batch of several hundred or thousands units from xiaomi, thus meaning destined for local chinese market

v1k1n9 said:
Do you have the same oem charger that i pictured above?
Click to expand...
Click to collapse
Yes, the exact same. But as that's not an European plug, I wonder if that's why I get different performance - it came with an adaptor.
I'm awaiting a new cable and charger in the mail soon that should clear it up.

Miui 7.5 global stable

Fataldose said:
Miui 7.5 global stable
Click to expand...
Click to collapse
Damn.
This is original charger and cable? Any US to EU adapter by any chance?
Here's hoping it's not lineage os related.

zoejo said:
Damn.
This is original charger and cable? Any US to EU adapter by any chance?
Here's hoping it's not lineage os related.
Click to expand...
Click to collapse
It's stock charger bro.

Using the stock charger, a qc2.0 one (given with the international version of MI5), I get about 2200ma - 2300ma. I haven't tried a quick charger 3.0. However, check your kernel as well. The stock one of Lineage OS have an issue with quick charging, working once only after boot. I use DragonXia kernel and the qc works all the time.
To check if it is kernel issue, shutdown your phone and them connect the charger. I will start charging but using the recovery/boot kernel based on marshmallow, which (at least for me) hasn't got the issue of qc. Observe then the speed of charge and report.

georgekav33 said:
Using the stock charger, a qc2.0 one (given with the international version of MI5), I get about 2200ma - 2300ma. I haven't tried a quick charger 3.0. However, check your kernel as well. The stock one of Lineage OS have an issue with quick charging, working once only after boot. I use DragonXia kernel and the qc works all the time.
To check if it is kernel issue, shutdown your phone and them connect the charger. I will start charging but using the recovery/boot kernel based on marshmallow, which (at least for me) hasn't got the issue of qc. Observe then the speed of charge and report.
Click to expand...
Click to collapse
Tested a mi5, same variant as mine, just today, with same lineage OS version. Also original charger and cable. Values are the same as yours, well above mine.
However, my original cable is defective, and has been refunded as the phone wasn't being recognized on the pc (which was a problem when flashing roms). A new one is in the mail, and in a day or two I suspect it'll solve the issue. I'll let you know.

Keep in mind apps are a bad way to check for QC capability.
My xiaomi stock charger puts out 1,8A @ 6V with 70% full battery(the higest current is being used between 20-50%, i'll try that later on)
Ampere only shows battery voltage(3,7-4,2V) instead of charging voltage and the ampere display is way off actual current

Question Pixel 7 WIreless Charging Not Working

Hey Friends
I am using Pixel 7. I just bought a wireless charger. Everything which has option for wireless charging is getting charged with that wireless charger but my Pixel 7 is not charging wirelessly.
Any solution for that.
thnX

Is there a reason you are not telling us wich mysterious charger has the problem ?

DJ-Tumor said:
Is there a reason you are not telling us wich mysterious charger has the problem ?
Click to expand...
Click to collapse
I tried on 3 different wireless charger same result, thn had a word with Google customer care and they said it's a on going problem with many devices and their tech team is looking into it.
wireless chargers I tried are from brands spigen, unigen, baseus

My P7 just came in and tested it on my three chargers. ALL WORK flawlessly.
Xiaomi 25W. Jootech 15W and another 5/10W unbranded cheap charger.
Soo...either you have a crap case on your device stopping it from charging, or your pixel is defective.

just to drop you a line:
Yootech + Xiaomi charger support Max Speed of 12W @ Pixel 7.
Actually I saw 13,5W at some time, but mostly it´s like 12,7W.

I'm having the same problem with different pixels since the 13 update.
They kinda fixed something, because it now charges, but sometimes and very slow.

You need the right charger. Industry are total idiots.
Most want you to buy QuickCharge chargers with the qualcom tech inside.
Obviously Google, Samsung and Apple switched/chose PowerDelivery are as "their charging tech".
Buy something like this:
https://www.amazon.de/dp/B09QM3NCS4?psc=1&ref=ppx_yo2ov_dt_b_product_details
It has both worlds and other than the 33W charger who never exceeded 18W when charged on both ports I didn´t see this one throttle down anything.
Additionally there are differences in the charging stand. I don´t really get it and since there is no information of built in chips or whatever best you can do is take their promises for real. I can confirm this with my own experience. Yootech Stand was pretty slow with the Xiaomi Mi10. Now is the king in the ring with the Pixel 7 by 0,5W.
Try this one:
https://www.amazon.de/dp/B09H2S98MK?psc=1&ref=ppx_yo2ov_dt_b_product_details
It is often recommended with google phones.
But It was in fact minimal slower than the other two I have here, so I´m going to send it back.
12-14W are possible with this thing.
If you want the total wireless power you´ll need the absurd expensive and UGLY Google stand.

Tested my WCS now couple times:
Yootech 13-15W
Xiaomi 12-14W
Funfact: Putting the Pixel upside down on the chargers give 1 extra Watt of charging speed.
Prooves many of the stands are too small for todays smartphones.
This "effect" will differ with phone-size and case used on the phone.

DJ-Tumor said:
You need the right charger. Industry are total idiots.
Most want you to buy QuickCharge chargers with the qualcom tech inside.
Obviously Google, Samsung and Apple switched/chose PowerDelivery are as "their charging tech".
Buy something like this:
https://www.amazon.de/dp/B09QM3NCS4?psc=1&ref=ppx_yo2ov_dt_b_product_details
It has both worlds and other than the 33W charger who never exceeded 18W when charged on both ports I didn´t see this one throttle down anything.
Additionally there are differences in the charging stand. I don´t really get it and since there is no information of built in chips or whatever best you can do is take their promises for real. I can confirm this with my own experience. Yootech Stand was pretty slow with the Xiaomi Mi10. Now is the king in the ring with the Pixel 7 by 0,5W.
Try this one:
https://www.amazon.de/dp/B09H2S98MK?psc=1&ref=ppx_yo2ov_dt_b_product_details
It is often recommended with google phones.
But It was in fact minimal slower than the other two I have here, so I´m going to send it back.
12-14W are possible with this thing.
If you want the total wireless power you´ll need the absurd expensive and UGLY Google stand.
Click to expand...
Click to collapse
DJ-Tumor said:
Tested my WCS now couple times:
Yootech 13-15W
Xiaomi 12-14W
Funfact: Putting the Pixel upside down on the chargers give 1 extra Watt of charging speed.
Prooves many of the stands are too small for todays smartphones.
This "effect" will differ with phone-size and case used on the phone.
Click to expand...
Click to collapse
Hey I am from India so tried 4-5 wireless charger available here but none of thm I found working, only one charger I found I shows battery percentage when I keep my phone on it but it doesn't also charge my phone.
But I tried wireless charging other device with my Pixel 7 using battery share option and those able to get charge from my Pixel 7 so this means wireless charging is working fine for my Pixel 7, if I am not wrong.
So I need to get an proper wireless charger, am I correct?
I had a word with customer care for Pixel and they said any Qi enabled charger will work with Pixel 7 but all the wireless charger I tried support Qi enabled devices but thn also no luck.
Any specific charger I need to look for other than Pixel wireless charker it's too costly in India.
Plz suggest

First thing to try is put the naked phone on the wireless charger.
Had several cases where family members were moaning about wireless charing it wasnt the several chargers they tried but their "beloved" phone-case
Charger recommenadion: charger with "𝙂𝙖𝙉 𝙄𝙄𝙄" like the one from pluggify
Stand recommendation: INIU Wireless Charger Stand
/EDIT: I can only repeat....ANY STAND I´ve put my P7 on WORKED flawlessly.
The fastest one is indeed the one in my car by 0,5-1W charging speed.
I tried 5 different ones so far.

I got this one, and it works. Charging slow, but for me it's OK: Anker 10W Max Wireless Charger, 313 Wireless Charger (Pad). I got a slim no name TPU case on my device all the time.
These are said to be working (German Android forums):
SAMSUNG EP-P4300B
INIU Wireless Charger, 15W
MoKo Wireless Charger + + QC Charger
Pixel Stand 2 (of course)
Amazon Brand - Eono C1
Belkin BoostCharge

+1 on Anker qi charger. It maxes out at 11W for me with a case on so it's a little slow I guess, but I keep it bedside and use it at night with an 85% limit set to (theoretically) save battery life - so it works fine for me.
https://www.amazon.com/Anker-Wireless-PowerWave-Qi-Certified-Charging/dp/B083B9HB6Q?ref_=ast_sto_dp

I got a 35W Heymix GaN charger and the Iniu 15W charger stand. Still no luck getting my P7 to charge. I'm beginning to think it is faulty. This is my second one. First one had problems making and receiving calls. I never had these problems with Samsung . . .

DJ-Tumor said:
First thing to try is put the naked phone on the wireless charger.
Had several cases where family members were moaning about wireless charing it wasnt the several chargers they tried but their "beloved" phone-case
Charger recommenadion: charger with "𝙂𝙖𝙉 𝙄𝙄𝙄" like the one from pluggify
Stand recommendation: INIU Wireless Charger Stand
/EDIT: I can only repeat....ANY STAND I´ve put my P7 on WORKED flawlessly.
The fastest one is indeed the one in my car by 0,5-1W charging speed.
I tried 5 different ones so far.
Click to expand...
Click to collapse
t-ryder said:
I got this one, and it works. Charging slow, but for me it's OK: Anker 10W Max Wireless Charger, 313 Wireless Charger (Pad). I got a slim no name TPU case on my device all the time.
These are said to be working (German Android forums):
SAMSUNG EP-P4300B
INIU Wireless Charger, 15W
MoKo Wireless Charger + + QC Charger
Pixel Stand 2 (of course)
Amazon Brand - Eono C1
Belkin BoostCharge
Click to expand...
Click to collapse
O.J. Simpson said:
+1 on Anker qi charger. It maxes out at 11W for me with a case on so it's a little slow I guess, but I keep it bedside and use it at night with an 85% limit set to (theoretically) save battery life - so it works fine for me.
https://www.amazon.com/Anker-Wireless-PowerWave-Qi-Certified-Charging/dp/B083B9HB6Q?ref_=ast_sto_dp
Click to expand...
Click to collapse
finally got wireless charger in India with which my Pixel is charging wirelessly.
https://www.amazon.in/gp/product/B09LRYMW9K/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
thnx for all the info and suggestions.

Revhead said:
I got a 35W Heymix GaN charger and the Iniu 15W charger stand. Still no luck getting my P7 to charge. I'm beginning to think it is faulty. This is my second one. First one had problems making and receiving calls. I never had these problems with Samsung . . .
Click to expand...
Click to collapse
Now on my THIRD Pixel 7. What a pile of garbage this phone is. Couldn't get wireless charging working and they replaced it. Now I'm back to not receiving some calls. I never had any problems like this with Samsung . . .

Now on my THIRD Pixel 7. What a pile of garbage this phone is. Couldn't get wireless charging working and they replaced it. Now I'm back to not receiving some calls. I never had any problems like this with Samsung . . .
Click to expand...
Click to collapse
I never had any problems like this with Pixel 7 . . .

New Folder said:
I never had any problems like this with Pixel 7 . . .
Click to expand...
Click to collapse
Lucky you. Not so lucky me. Now on my third SIM too.

Revhead said:
Lucky you. Not so lucky me. Now on my third SIM too.
Click to expand...
Click to collapse
Something is wrong with your device or methods. Are you swapping your Note 3 sim with the Pixel 7 or not registering it correctly with the network? Your frustration is palpable and maybe it's time to just go back to Sammy and cut your losses. Either that or put aside the Note 3 and focus on getting the setup for the P7 working as most of us here have done. The device is not a piece of garbage as you state so start over again with a reset and working sim and ask questions from that standpoint.

Thanks for the advice. I'll keep you posted. I want to like this phone, it just keeps letting me down . . .

Revhead said:
Thanks for the advice. I'll keep you posted. I want to like this phone, it just keeps letting me down . . .
Click to expand...
Click to collapse
Well there have been instances of faulty hardware so perhaps an RMA? Or did you do that already? Oh I just looked and you're on your third device. It would help if we knew more about your setup. Like carrier, wireless charger not working, type of sim (physical or eSim) maybe even country you're in. I would start from scratch and factory reset with a brand new physical sim from the carrier, put the sucker in when prompted and connect to the network. Don't restore anything yet even though it's a pain to reset everything back up. Just make sure it works and perhaps go to a store like Best Buy and test out the Google wireless charger. If you can make and receive calls and texts, get data and charge wireless then go from there. Failing any of those simple things would require another RMA. It's really a nice device so I hope you get it figured out.