crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
GAPPS: DOWNLOAD GAPPS
First time installing crDroid to your J7 Prime, or coming from another ROM:
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
VoLTE
Screen delay after the first startup, turn on the AOD
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community
XDA:DevDB Information
crDroid, ROM for the Samsung Galaxy J7
Contributors
[email protected], [email protected], exynos7870, Team LineageOS
Source Code: https://github.com/Exynos7870/android_device_samsung_exynos7870-common
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Stock Nougat
Based On: lineageOS
Version Information
Status: Stable
Current Stable Version: 4.2
Stable Release Date: 2018-05-02
Created 2018-05-02
Last Updated 2018-07-25
Reserved
[email protected] said:
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
Features
Click for feature list
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
DOWNLOAD GAPPS
First time installing crDroid to your J7 Prime, or coming from another ROM:
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
VoLTE
Screen delay after the first startup, turn on the AOD
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community
XDA:DevDB Information
crDroid, ROM for the Samsung Galaxy J7
Contributors
[email protected], [email protected], exynos7870, Team LineageOS
Source Code:https://github.com/Exynos7870/android_device_samsung_exynos7870-common
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Stock Nougat
Based On: lineageOS
Version Information
Status: Stable
Current Stable Version: 4.2
Stable Release Date: 2018-05-02
Created 2018-05-02
Last Updated 2018-05-02
Click to expand...
Click to collapse
Good work..!
Awesome!
good work!
Thank you.. I will try this rom, but I have a question. Formatting the phone many times is it dangerous? Can it cause damage to the device?
Hichem Saadani said:
Thank you.. I will try this rom, but I have a question. Formatting the phone many times is it dangerous? Can it cause damage to the device?
Click to expand...
Click to collapse
No
[email protected] said:
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
Features
Click for feature list
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
DOWNLOAD GAPPS
First time installing crDroid to your J7 Prime, or coming from another ROM:
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
VoLTE
Screen delay after the first startup, turn on the AOD
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community
XDA:DevDB Information
crDroid, ROM for the Samsung Galaxy J7
Contributors
[email protected], [email protected], exynos7870, Team LineageOS
Source Code: https://github.com/Exynos7870/android_device_samsung_exynos7870-common
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Stock Nougat
Based On: lineageOS
Version Information
Status: Stable
Current Stable Version: 4.2
Stable Release Date: 2018-05-02
Created 2018-05-02
Last Updated 2018-05-02
Click to expand...
Click to collapse
Is official really? Bro
trancuongdap said:
Is official really? Bro
Click to expand...
Click to collapse
yes, when have a new update you will receive a notification via OTA
Thanks much. I'll try it
I installed the Rom. It is excellent but there is a bug for me. When the device restart, I see a red message about kernel, and when I lock the screen, I can't reopen it. After locking the screen it is impossible to reactivate the phone. I must reboot the phone in order to re-open it. Is there a solution? How can I solve the problem of the kernel?
Thank you for your help.
Hichem Saadani said:
I installed the Rom. It is excellent but there is a bug for me. When the device restart, I see a red message about kernel, and when I lock the screen, I can't reopen it. After locking the screen it is impossible to reactivate the phone. I must reboot the phone in order to re-open it. Is there a solution? How can I solve the problem of the kernel?
Thank you for your help.
Click to expand...
Click to collapse
on the kernel in red on the boot in the upper left? to solve the problem of screen delay turn on the AOD that remains in the settings.
[email protected] said:
on the kernel in red on the boot in the upper left? to solve the problem of screen delay turn on the AOD that remains in the settings.
Click to expand...
Click to collapse
Will the LOS team solve the screen delay?
Who is responsible?
I can not type in Vietnamese
Minhkaka said:
I can not type in Vietnamese
Click to expand...
Click to collapse
Change keyboard that support Vietnamese! Or download Vietnamese language for keyboard from settings.
going to try it tomorrow, downloading...
AmirRouichi said:
going to try it tomorrow, downloading...
Click to expand...
Click to collapse
Try and send feedback pls.
Well thanks to @[email protected] for this rom, its really very fast rom, even AOD does not have any problem (unloacks with double tap on screen / or with the lock button) , also have a lot of customzation for the rom so you don't need to install any other apps, the battery is good but i will use it for 2 days and see. also it has no transparent option for the statusbar :/ and i hope the dep adds duel speaker mod for it, it will be the best rom i think.
Tem como fazer root pelo Super Su?
Can anyone confirm if the camera records videos correctly? With audio and video in sync, without audio delay?
Related
ROM thread text:
This is crDroid for 5" Pixel [sailfish]
crDroid Website: https://crdroid.net/
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
Vendor image for current build - OPM4 July vendor image - DOWNLOAD VENDOR
GAPPS: For now, open gapps unofficial, also courtsey @razorloves - DOWNLOAD GAPPS
OpenGapps: Not Supported anymore, use @razorloves gapps.
First time installing crDroid to your Pixel, or coming from another ROM:
**NOTE** As you probably know by now, marlin and sailfish are weird. You must be on TWRP 3.2.0.0 to install this! 3.2.1.0 does not allow ROM installation. 3.2.0.0 does not encrypt properly, so you must remove your PIN/password before booting to and / or installing it. These installation instructions will assume you already know and have done that.
**NOTE** You are also able to use 3.2.1.-2 (3.2.0.0 or 3.2.1.-2)(Nothing in between)
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip & vendor img to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
5) Flash TWRP ***If you do not do this, you will lose TWRP!***
6) Reboot back into TWRP
7) Flash vendor image
7a) Mount vendor partition, navigate to vendor/overlay and delete that folder
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk 16.2
If you like music like I do and want to make it better, see post #3 for instructions on installing ViPER4Android.
Instructional Video
I Apologize about video quality, but this will help get you an idea of the steps involved.
Steps are the same for Marlin and Sailfish. Use corresponding files for device.
https://youtu.be/mmxIrp7BiRk
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
None that stand out, If you find something that is consistently reproducible, do so and pull a log. Without logs, we cannot fix the bugs. Please report any that you run into, assuming you have tested on a clean install. :good:
NOTE ON SUBSTRATUM
We currently do not have substratum commits in the ROM because they have not updated their repos on git for Oreo. As such, if you want to use Substratum, you will be doing so by allowing root and using legacy mode. you -must- make sure whatever theme you try supports 8.1. Even some that say they support Oreo may only work with 8.0, not 8.1. I'd recommend the following:
Suggestion: whenever installing themes, remove your pin/password so you can get TWRP to mount data.
If you get in a FC/bootloop situation, boot to TWRP, mount data and remove the file /data/system/overlays.xml.
That should allow you to boot and uninstall the overlays without reinstalling anything.
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- @razorloves - Without his device tree and kernel bringup to work from, crDroid for marlin & sailfish would not be possible at all. Apart from the ROM development itself (for which @neobuddy89 bears the largest burden, in addition to the great developers of LineageOS itself), credit for this ROM being able to even build goes to razorloves.
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community
Source Code:
Device tree: https://github.com/razorloves/android_device_google_marlin
Kernel tree: https://github.com/razorloves/android_kernel_google_marlin
Vendor tree: https://github.com/razorloves/proprietary_vendor_google
Credit for all of those trees goes to @razorloves , without whose work crDroid for marlin would be a shell of itself!
XDA:DevDB Information
[ROM] [sailfish] [8.1] [LOS-based] **crDroid**v4.7, ROM for the Google Pixel
Contributors
hokiealumnus, neobuddy89, BHermes21, The rest of the crDroid team
Source Code: https://github.com/crdroidandroid/
ROM OS Version: 8.x Oreo
Based On: LineageOS
Version Information
Status: Nightly
Current Stable Version: v4.0
Stable Release Date: 2018-03-23
Beta Release Date: 2018-01-19
Created 2018-01-20
Last Updated 2018-10-12
I already said it in my post above, but feel it needs repeating. HUGE thanks to @razorloves , without whose marlin bring-up this ROM would still not be built.
Also thanks to @almightysiman for confirming the ROM functions on sailfish.
Side note: You won't find BETA2 for sailfish. I skipped it so sailfish & marlin were on the same version number.
*** NOTE - We cannot actively support audio (or any other) mods. I'm posting this because it works for me and I use it personally. This is not supported by our ROM team. Only the ROM / vendor / gapps and nothing else is supported by the crDroid development team. ***
If you like music as much as I do and prefer to use Viper4Android, install it as follows:
0) This requires Magisk; install Magisk 15.x (whatever is most recent)
1) Using a root explorer (I prefer FX File Explorer), navigate to /system/system/priv-app/AudioFX and rename AudioFX.apk to AudioFX.BAK. Reboot.
2) Install three Magisk modules:
a) Magisk SELinux Permissive Script (Get it here: https://forum.xda-developers.com/apps/magisk/module-magisk-selinux-permissive-script-t3577549)
b) Busybox for Android NDK v1.27.2 by osm0sis (Get it from Magisk downloads in the Magisk app)
c) ViPER4Android FX v2.8 by ahrion, zackptg5 (Also from Magisk downloads)
3) Reboot.
4) Enjoy your better music!
Awesome! :fingers-crossed:
Does this rom have always on display? Didn't see it in the features list
Thanks to all involved who had a part in creating this ROM...
Sorry to be that guy but could someone briefly explain step 7a for me ? I've only flash one Rom so far on my pixel and it did not go smoothly to say the least...
bluedog220 said:
Sorry to be that guy but could someone briefly explain step 7a for me ? I've only flash one Rom so far on my pixel and it did not go smoothly to say the least...
Click to expand...
Click to collapse
You have to mount vendor (TWRP/Mount/Vendor, back), then go to Advanced / file manager/ navigate to /vendor/overlay. Choose delete, swipe right.
Gotta say, this is, so far, the perfect flashing experience in Oreo ROMs. I had no force-closes at setup, and no issues with the flashing process. So far, it has been great. Gonna use it for a few days, but as of now, this looks like my daily driver. Thanks again for this!
Does inlimited original quality photos work? Some ROMs I've noticed it doesn't work
shagbag913 said:
Does inlimited original quality photos work? Some ROMs I've noticed it doesn't work
Click to expand...
Click to collapse
We good! Working on mine.
stompysan said:
We good! Working on mine.
Click to expand...
Click to collapse
Thanks for checking! Sounds like this is going on my pixel
is this supposed to have the stock boot animation or did i screw something up?
shagbag913 said:
is this supposed to have the stock boot animation or did i screw something up?
Click to expand...
Click to collapse
Yep, stock boot animation, at least for now.
Are GAPPS required to avoid problems? FC's bootloops etc. Just wondering cause I don't run gapps anymore and know that some of our oreo roms need GAPPS to function properly
jacobas92 said:
Are GAPPS required to avoid problems? FC's bootloops etc. Just wondering cause I don't run gapps anymore and know that some of our oreo roms need GAPPS to function properly
Click to expand...
Click to collapse
No clue, never tried. That's like running half a ROM for me. You're welcome to try though. Please report back if you do.
Hello somehow started on the dark interface when I used the dark wallpaper nothing changed ?
pepa 77 said:
Hello somehow started on the dark interface when I used the dark wallpaper nothing changed ?
Click to expand...
Click to collapse
Did you delete the overlay folder from vendor?
The dark theme auto switcher was disabled by our Dev. It was causing issues. I'm not surprised it didn't switch for you, but definitely am surprised it was enabled at all.
hokiealumnus said:
Did you delete the overlay folder from vendor?
The dark theme auto switcher was disabled by our Dev. It was causing issues. I'm not surprised it didn't switch for you, but definitely am surprised it was enabled at all.
Click to expand...
Click to collapse
Thanks for clarifying the thing, this is a great Rom Congratulations.?
Really nice for a beta ?
Sent from my Pixel using XDA-Developers Legacy app
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
DOWNLOAD TWRP 3.2.3.0
GAPPS: DOWNLOAD GAPPS
First time installing crDroid to your ENTER-PHONE-NAME, or coming from another ROM: <--THESE MAY NEED UPDATING FOR YOUR PARTICULAR DEVICE; BE THOROUGH IN INSTRUCTIONS-->
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip Sensor.zip to sdcard
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
Camera
Bootanimation (ignore or flash new bootanimation)
Launcher icons very small (install other launcher)
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- arco68
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community
XDA:DevDB Information
crDroid v5.1, ROM for the Samsung Galaxy Tab 3 7.0
Contributors
DarkFrenzy
Source Code: https://github.com/crdroidandroid
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest TWRP 3.2.3.0
Based On: LineageOS 16
Version Information
Status: Beta
Created 2019-02-17
Last Updated 2019-02-28
Screenshots
I congratulate you, my friend. It's really incredible.
It is very pleasing to see that he developed such a device.
hopefully the bugs are soon resolved.
gapps link broken. which gapps do you recommend.
bluetooth constantly getting stopped error. I noticed them for now.
kkalkan said:
gapps link broken. which gapps do you recommend.
bluetooth constantly getting stopped error. I noticed them for now.
Click to expand...
Click to collapse
http://opengapps.org
choose arm 9.0 pico or nano
Bluetooth was fine when i tried
Thanks for the suggestion. bluetooth has failed several times but it is good for now.
Wow this device has so much development
But my sm-t116 no ????
Can you help me @DarkFrenzy
@sasi2006166 soory i cannot help, i just build the rom using s4 mini device tree
sasi2006166 said:
Wow this device has so much development
But my sm-t116 no
Click to expand...
Click to collapse
Hey
How you builded using s4 mini tree
The screen and touchscreen works?
In my Rom won't work
The screen is black but system boots because I can see it with Vysor on pc
Thanks for the reply
~sasi2006166
DarkFrenzy said:
@sasi2006166 soory i cannot help, i just build the rom using s4 mini device tree
Click to expand...
Click to collapse
And what about kernel please reply
dhruvpatel_9880 said:
And what about kernel please reply
Click to expand...
Click to collapse
kernel same
https://github.com/LineageOS/android_kernel_samsung_msm8930-common
Can't flash latest TWRP
I have TWRP 3.0 and this will not flash the crDroid. I've already wiped the system - how do I upgrade to 3.2? I have both Odin and ADB - can't figure out how to get it done! Help?
thearne3 said:
I have TWRP 3.0 and this will not flash the crDroid. I've already wiped the system - how do I upgrade to 3.2? I have both Odin and ADB - can't figure out how to get it done! Help?
Click to expand...
Click to collapse
Install using twrp, switch to image install and select twrp.img install to recovery partition
I think the problem is my unit is not compatible: SM-T210R. Can I assume your ROM won't work either? Thanks!
What's the best ROM for this unit? No bloatware, etc.
@thearne3 probably not, but you are welcome to try, but i highly recommend that you be comfortable in recovering from brick. make sure you have all the means to do so, or are ok with a paperweight.
@DarkFrenzy permission to pull source and port?
With exception of camera, everything works very well, including Freedompop service via Sprint data network. Thanks, @DarkFrenzy!
I have a question...
Will it work on SM-T210?
I think they are both 7" and I don't think they have any differences in hardware.
I will be happy if someone will respond
DarkFrenzy said:
kernel same
https://github.com/LineageOS/android_kernel_samsung_msm8930-common
Click to expand...
Click to collapse
cRDROID ROM WORK ON >>>>>>>>>>>>> SM- T116NU <<<<<<<<<<<<<<<<<<<<<<<<<<<<<MODEL SAMSUNG GALAXY TAB 3 LITE
DarkFrenzy said:
crDroid
Click to expand...
Click to collapse
Working just fine for me (minus the mention known issues) on my Sprint SM-T217, in terms of anything crashing.
SafteyNet will NOT pass on this rom! It's something to do with the kernel or the boot image I think I'm not sure.
Basic Integrity is failing which signifies an OS level problem, not a Magisk problem.
Strangly though, disabling and enabling MagiskHide on each boot causes the SafteyNet to pass. Any ideas OP?
Hopefully the dev can look into this.
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list
Always Have a full functional Backup. Just in case!
DOWNLOAD UN-OFFICIAL BUILDS
DOWNLOAD GAPPS
Telegram Discussion Group - https://t.me/joinchat/AMOzyEOoReX9nBvLnnzYQA
First time installing crDroid to your Xiaomi Mi MAX 2, or coming from another ROM:
** Make sure you're running the latest TWRP Recovery
1) Copy crDroid zip, gapps zip
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
You tell me
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community
Credits :
@Hard_Rock83
@Mohzuned
@MaheshTechnicals
Sources:
Kernel - https://github.com/rakeshraimca/Kernel_xiaomi_oxygen
ROM - https://github.com/crdroidandroid
XDA:DevDB Information
crDroid v5.10, ROM for the Xiaomi Mi Max 2
Contributors
MaheshTechnicals
Source Code: https://github.com/crdroidandroid
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked Bootloader & TWRP Recovery
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 5.10
Stable Release Date: 2019-12-07
Created 2019-09-15
Last Updated 2019-12-07
Reserved
7 Dec 2019 Update
Changelog:
- Latest crDroid sources.
-crDroid 5.10,
-November patch
-Bug fixes and performance improvements
Again one more updated ROM... a big thank you
[email protected] said:
Again one more updated ROM... a big thank you
Click to expand...
Click to collapse
Welcome ?
This ROM is ???.
For audio problem follow this
Flash ROM
Flash beingtejas graphic and audio pie driver
flash Hard rock kernel v5 by beingtejas
Flash gapps
Flash magisk
This is everything you need!!
Just Change the values in kernel auditor if you don't want any overclocking!
Thank you. This is a great rom. Please continue this forum.
Sagar3834 said:
This ROM is .
For audio problem follow this
Flash ROM
Flash beingtejas graphic and audio pie driver
flash Hard rock kernel v5 by beingtejas
Flash gapps
Flash magisk
This everything you need!!
Just Change the values in kernel auditor if you don't want any over locking!
Click to expand...
Click to collapse
Thanks for helping people
BIPU0 said:
Thank you. This is a great rom. Please continue this forum.
Click to expand...
Click to collapse
Sure ?
All the best.. you done a fantastic job..
MaheshTechnicals said:
Sure
Click to expand...
Click to collapse
It's good that development still continued.. :good:
beingtejas said:
It's good that development still continued.. :good:
Click to expand...
Click to collapse
true!
beingtejas said:
It's good that development still continued.. :good:
Click to expand...
Click to collapse
agreed
What about in-call volume toggle, does it work? I really want to try this rom out, but all the other ones that I tried do not support this.
trunapushpa said:
What about in-call volume toggle, does it work? I really want to try this rom out, but all the other ones that I tried do not support this.
Click to expand...
Click to collapse
All pie roms same
Amazfit not working. The one thing important. Lol
I installed it and looks promising , just I think I need graphic driver , what do you advice me.
Because I came from miui the colors there was so pretty, here is pale maybe my ignorance please help .
And also while charging why its slow?
I cannot install Magisk. When I start Magisk install (after ROM and Gappss installing) it says " ! Cannot mount Vendor" and stops further process. What may be the problem. I tried installing from Mi-Globe ROM.
zost said:
I cannot install Magisk. When I start Magisk install (after ROM and Gappss installing) it says " ! Cannot mount Vendor" and stops further process. What may be the problem. I tried installing from Mi-Globe ROM.
Click to expand...
Click to collapse
which recovery u useo?
[email protected] said:
which recovery u useo?
Click to expand...
Click to collapse
Official TWRP 3.2.3.0
zost said:
Official TWRP 3.2.3.0
Click to expand...
Click to collapse
try orange fox10
[email protected] said:
try orange fox10
Click to expand...
Click to collapse
It worked that way. Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][CENTER]**** Disclaimer: I'm not responsible if you destroy your device. Use at your own risk!!! ****[/CENTER][/B]
Android Open Source illusion Project
About us:
AOSIP is a quality custom ROM based purely on AOSP. Twisted with the latest features and blended with stability. We strive for perfection and it shows.
Team Illusion:
Josh Fox (xlxfoxxlx)
Akhil Narang
Brett Montague
Sri Harsha
Harsh Shandilya
Bug reporting:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Source code:
AOSiP Github
Kernel Source
Latest Downloads:
If You like my work please donate some for upcoming projects, updates.
PAYPAL
UPI
[ My Website]
Download TWRP Recovery (orangefox not working)
ROM
FAQ and Install instructions:
Install instructions:
Have an unlocked bootloader, and TWRP installed. (use TWRP trable recovery only.)
Wipe system, vendor, dalvik and data (don't report anything bugs if you dirty flashed over another ROM)
Flash the ROM, reboot to TWRP, then flash GApps, Magisk (again, don't report bugs if you can't reproduce them with just ROM and GApps)
Reboot into the system, and enjoy the illusion!
Current Issues/Information:
* Tell me
Credit/Thanks:
Mike Williams (founder and creator of AOSiP)
Google for Android and AOSP
LineageOS
AICP
ABC ROM
AquariOS
BootleggersROM
PixelExperience
OmniROM
Cory Collins
---------
Any others we may have forgotten to credit
And last but not the least, all our testers, who have helped us to squash many bugs so that we can try to release builds that as are flawless as possible
Credits :
@Hard_Rock83
@Mohzuned
@MaheshTechnicals
XDA:DevDB Information
AOSIP 9.0, ROM for the Xiaomi Mi Max 2
Contributors
MaheshTechnicals
Source Code: https://github.com/AOSiP
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked Bootloader & TWRP Recovery
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 9.0
Stable Release Date: 2019-09-29
Created 2019-09-30
Last Updated 2019-09-30
Reserved
@maheshTechnicals
Hi,bro. Is it possible having a Rom with Signaturen Spoofing enabled? Unfortunate HavocOs is dead.
Thy, Ray
Trying to flash it, third time already, same message: zip code format... something wrong. Maybe is just me, but only for letting you know. Good luck!
zburli said:
Trying to flash it, third time already, same message: zip code format... something wrong. Maybe is just me, but only for letting you know. Good luck!
Click to expand...
Click to collapse
Try with this recovery TWRP
Flashed , rom is super smooth...let me use it for some days, then i comment about other features. Thanks to Mahesh technical for his hard work.
BIPU0 said:
Flashed , rom is super smooth...let me use it for some days, then i comment about other features. Thanks to Mahesh technical for his hard work.
Click to expand...
Click to collapse
Thanks ?
And Mahesh Technicals not Mahesh Technical ☺
Hi, I have a problem with every pie rom.
After first boot, phone get freeze after 1 minute and restart...
with oreo and nougat roms everything is ok, but cant use any pie rom...
any solution, please help...
Gambitore said:
Hi, I have a problem with every pie rom.
After first boot, phone get freeze after 1 minute and restart...
with oreo and nougat roms everything is ok, but cant use any pie rom...
any solution, please help...
Click to expand...
Click to collapse
U need to follow that method
First take a internal storage backup first in to your pc.
1. Flash latest fastboot rom on your MI max 2 via pc
Fastboot rom
2. Flash Treble Recovery on your phone.
Orangefox Recovery
3. Now open recovery mode. Go to wipe section then wipe data /dalvik/system/vendor/
Format your phone. Connect your phone to pc using USB. U r on a recovery mode so go to mount section select all options for mount everything. If some option will not mount just lev it.
4. Download your favorite pie rom file into your pc.
Now copy your favourite Pie Rom Zip & Gapps to your internal storage.
5. Now come to your phone. Go to install section select ROM?+ Gapps+ magisk
It will solve your issue.
thanks for quick reply, all that Im doing, except flashing fastboot rom...
I installed the rom on my Mi Max 2, I have a problem with loading which is always like "slow loading" and another question how do I make the sleep screen not always on? uses up a lot of battery. but the rom is very good.
HumbertoV said:
I installed the rom on my Mi Max 2, I have a problem with loading which is always like "slow loading" and another question how do I make the sleep screen not always on? uses up a lot of battery. but the rom is very good.
Click to expand...
Click to collapse
1. For slow loading decrease scale from developer options.
Window animation scale
Transition animation scale
Animator duration scale
Set it to 0.5x
2. For display always on go to settings /display /Ambient options desable it,,
ROMS UPDATE
Tested series:
AOSIP
Superior OS
Candy ROM
cr droid OS
Smoothness:
AOSIP is better than every OS in the list.
Battery:
Not that much difference as per my use.
Just some tweaks (as discussed in threads) settings in kernel auditor and you are good to go for the more than whole day.
BUGS:
AOSIP
Volume bar is on left side, and no settings to change for it.
Few glitched but will be resolved by next month update.
SUPERIOR OS
Whatsapp detecting for "custom ROM" can be either build error or some minor glitch.
CR DROID OS
Wasnt able to find the setting to turn off the hardware navbar.
CANDY ROM
Pretty ok.
UI is not that okay, and minor glitches for some apps (i.e., Apps crashing automatically)
Shout out @MaheshTechnicals for working on these ROMS.
Thanks a lot for keeping the 9.0 versions alive.
sinhapratik.11136 said:
ROMS UPDATE
Tested series:
AOSIP
Superior OS
Candy ROM
cr droid OS
Smoothness:
AOSIP is better than every OS in the list.
Battery:
Not that much difference as per my use.
Just some tweaks (as discussed in threads) settings in kernel auditor and you are good to go for the more than whole day.
BUGS:
AOSIP
Volume bar is on left side, and no settings to change for it.
Few glitched but will be resolved by next month update.
SUPERIOR OS
Whatsapp detecting for "custom ROM" can be either build error or some minor glitch.
CR DROID OS
Wasnt able to find the setting to turn off the hardware navbar.
CANDY ROM
Pretty ok.
UI is not that okay, and minor glitches for some apps (i.e., Apps crashing automatically)
Shout out @MaheshTechnicals for working on these ROMS.
Thanks a lot for keeping the 9.0 versions alive.
Click to expand...
Click to collapse
Thanks for your feedback ?
MaheshTechnicals said:
Thanks for your feedback
Click to expand...
Click to collapse
No issues.
Could you update me for the bug in AOSIP ROM.
The volume bar on the left, is there any settings which can be tweaked or is that a ROM bug?
sinhapratik.11136 said:
No issues.
Could you update me for the bug in AOSIP ROM.
The volume bar on the left, is there any settings which can be tweaked or is that a ROM bug?
Click to expand...
Click to collapse
It is ROM source bug
MaheshTechnicals said:
It is ROM source bug
Click to expand...
Click to collapse
Thanks for the update. Can it be rectified in the upcoming update?
I Appreciate your hard work bro
But I need some things to know about this rom
does this rom get stuck on call as well as other pie roms ex. havoc and superior os
things i noticed while i was on superior os that people where unable to call me for quite times
so does this rom occurs same issues
using System;
class xda
{
public static void Main(string[] args)
{
Console.WriteLine("THANK YOU FOR YOUR HARD WORK WE APPRECIATE IT <3");
}
}
Hi, is the fingerprint working? Thanks
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
GAPPS: opengapps.org
First time installing crDroid to your ENTER-PHONE-NAME, or coming from another ROM: <--THESE MAY NEED UPDATING FOR YOUR PARTICULAR DEVICE; BE THOROUGH IN INSTRUCTIONS-->
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip <--& vendor img, if applicable--> to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
Nothing Everything Working Fine
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- ENTER-SPECIFIC-THANKS-HERE-IF-YOU-HAVE-THEM
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
XDA:DevDB Information
crDroid, ROM for the Xiaomi Redmi 4a
Contributors
Arpon sarkar
Source Code: https://github.com/crdroidandroid
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 5.8
Stable Release Date: 2019-10-01
Created 2019-10-01
Last Updated 2019-10-01
is anyone trying this, how good is the battery life compared to the other pie roms, is lineage based roms are better in battery than aosp based roms
Redmi 4A abdal said:
is anyone trying this, how good is the battery life compared to the other pie roms, is lineage based roms are better in battery than aosp based roms
Click to expand...
Click to collapse
yes u will get also better bb in crDroid
Arpon sarkar said:
yes u will get also better bb in crDroid
Click to expand...
Click to collapse
OK thanks I will try this rom, do I need quota feature enabled recovery like pe
Redmi 4A abdal said:
OK thanks I will try this rom, do I need quota feature enabled recovery like pe
Click to expand...
Click to collapse
yes now every roms come with quota feature btw Q coming soon stay tuned
When will be android 10 available
Screen auto rotation don't work..... Solution???
Smooth rom, but sometimes the animations are a little bit lags, tho the rom are working fine asf
Can anyone send me apk Quickstep launcher from this rom?
Arpon sarkar said:
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
GAPPS: opengapps.org
First time installing crDroid to your ENTER-PHONE-NAME, or coming from another ROM: <--THESE MAY NEED UPDATING FOR YOUR PARTICULAR DEVICE; BE THOROUGH IN INSTRUCTIONS-->
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip <--& vendor img, if applicable--> to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
Nothing Everything Working Fine
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- ENTER-SPECIFIC-THANKS-HERE-IF-YOU-HAVE-THEM
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
XDA:DevDB Information
crDroid, ROM for the Xiaomi Redmi 4a
Contributors
Arpon sarkar
Source Code: https://github.com/crdroidandroid
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 5.8
Stable Release Date: 2019-10-01
Created 2019-10-01
Last Updated 2019-10-01
Click to expand...
Click to collapse
Excuse me sir, I want to report a bug on the Pie Control feature.
When I want to enable Pie Control, my phone suddenly got black screen and can't do anything, even though I reboot my phone.
I was forced to do hardreset (wipe data, dalvik cache, cache, internal) and lost all my data
I hope you can fix this problem on the next build later.
Thank you so much!
Here is the logcat:
drive*google*com/file/d/1-5wjC00VaqZpjL11zGO8DrrbLd41uVJy/view?usp=drivesdk
godenk789 said:
Excuse me sir, I want to report a bug on the Pie Control feature.
When I want to enable Pie Control, my phone suddenly got black screen and can't do anything, even though I reboot my phone.
I was forced to do hardreset (wipe data, dalvik cache, cache, internal) and lost all my data
I hope you can fix this problem on the next build later.
Thank you so much!
Here is the logcat:
drive*google*com/file/d/1-5wjC00VaqZpjL11zGO8DrrbLd41uVJy/view?usp=drivesdk
Click to expand...
Click to collapse
Oky Thanks for the bug report but i dropped official support for Redmi 4A
Oh k
Arpon sarkar said:
Oky Thanks for the bug report but i dropped official support for Redmi 4A
Click to expand...
Click to collapse
Oh man, I feel sad to hear that...
I like this ROM because it has many customization features without systemUI instability. I have tried many other custom ROMs and I did not last more than 3 days and replaced them due to instability + lack of customization features. So, I hope the next build is released with other maintainer asap :good:
Anyway, thank you for porting this awesome ROM to my phone!
godenk789 said:
Oh man, I feel sad to hear that...
I like this ROM because it has many customization features without systemUI instability. I have tried many other custom ROMs and I did not last more than 3 days and replaced them due to instability + lack of customization features. So, I hope the next build is released with other maintainer asap :good:
Anyway, thank you for porting this awesome ROM to my phone!
Click to expand...
Click to collapse
i'll give a last android q update asap
awesome