not sure if this is against some xda policy but I opened this thread to share the beta otas with you since the OP of the other thread wanted to close it.
Telegram Channel: https://t.me/attoreo
These require BRA1
CRE1
CRCA (newest)(Janitor87)
The rest require BRC1 (BRA1 to BRC1 update)
CRE2(Janitor 87's link)
or from android file host
Requires BRD1
CRE4(Janitor 87's link)
Its the last? do you know where out the final vercion?
branstonmorgan said:
not sure if this is against some xda policy but I opened this thread to share the beta otas with you since the OP of the other thread wanted to close it.
This beta still require BRA1:
https://drive.google.com/open?id=1UIIr8G7l1eQlXr6dqTxoD7wuX9cRgHQO
Click to expand...
Click to collapse
Where did you get it? Is this the final Version?
Thanks, I was on CRD6 oreo beta and it was fine, except for the battery that was draining a bit quickly and Device Health that kept on stopping (had to disable it), so I went back to BRA1 (BRC1 now from OTA update). Will try this when I get a chance, hopefully it'll be better, or maybe the "official" one will drop soon...
branstonmorgan said:
not sure if this is against some xda policy but I opened this thread to share the beta otas with you since the OP of the other thread wanted to close it.
This beta still require BRA1:
https://drive.google.com/open?id=1UIIr8G7l1eQlXr6dqTxoD7wuX9cRgHQO
Click to expand...
Click to collapse
How to install that? And its trip a knox or not?
juni12 said:
Where did you get it? Is this the final Version?
Click to expand...
Click to collapse
From the att servers and I'm not sure if it's the final version. It runs smoothly and I'm sure they're close to releasing the final version
anarasgarli said:
How to install that? And its trip a knox or not?
Click to expand...
Click to collapse
You have to downgrade back to BRA1 using Odin and then flash it like the other betas(there's a closed thread that has older ones and instructions) it does not trip Knox
Imma_Thai said:
Thanks, I was on CRD6 oreo beta and it was fine, except for the battery that was draining a bit quickly and Device Health that kept on stopping (had to disable it), so I went back to BRA1 (BRC1 now from OTA update). Will try this when I get a chance, hopefully it'll be better, or maybe the "official" one will drop soon...
Click to expand...
Click to collapse
Battery life seems normal so far and I havent had any device health stopping messages on this firmware. I know I wish they would just drop the official these run like official firmwares, most of them anyway :laugh:. I'm tired of having to downgrade back lol :laugh:
Looks like The ATT released the new beta of Oreo build: G935UUEU4CRE2
This build will be able to download in 12-24 hours.
Janitor87 said:
Looks like The ATT released the new beta of Oreo build: G935UUEU4CRE2
This build will be able to download in 12-24 hours.
Click to expand...
Click to collapse
What is Att server's link?
Janitor87 said:
Looks like The ATT released the new beta of Oreo build: G935UUEU4CRE2
This build will be able to download in 12-24 hours.
Click to expand...
Click to collapse
Wow, just set up CRE1. Unless there's a significant change, I'm likely gonna skip this one. lol!
Imma_Thai said:
Wow, just set up CRE1. Unless there's a significant change, I'm likely gonna skip this one. lol!
Click to expand...
Click to collapse
Note that CRE1 just gave me a "Device Health keeps stopping" error, so it's still an issue.
Some bad news the new CRE2 update requires the BRC1 firmware and we dont have an odin flashable of BRC1 the best I can do is to get the BRA1 to BRC1 update zip which means to go from one oreo beta to another we have to odin back to BRA1 flash BRC1 through recovery and then flash the oreo zip after.
Also, is everybody cool with me deleteing some of the older oreo betas? I'm running out of google drive space
The flashing to BRC1 before going to oreo beta is only required on the S7 Edge for some reason.
Hey. I downloaded and uploaded the new firmware. URL is : https://1drv.ms/u/s!AoONmYxVHYIpgY1AL1aSiGWfUBwsmQ
Who can share link on the BRC1 ?
branstonmorgan said:
Some bad news the new CRE2 update requires the BRC1 firmware and we dont have an odin flashable of BRC1 the best I can do is to get the BRA1 to BRC1 update zip which means to go from one oreo beta to another we have to odin back to BRA1 flash BRC1 through recovery and then flash the oreo zip after.
Also, is everybody cool with me deleteing some of the older oreo betas? I'm running out of google drive space
The flashing to BRC1 before going to oreo beta is only required on the S7 Edge for some reason.
Click to expand...
Click to collapse
That makes things more complicated. Have you tried CRE2, and if so, how is it?
Janitor87 said:
Hey. I downloaded and uploaded the new firmware. URL is : https://1drv.ms/u/s!AoONmYxVHYIpgY1AL1aSiGWfUBwsmQ
Who can share link on the BRC1 ?
Click to expand...
Click to collapse
Thanks. Can you share with us how you grab beta firmware file from ATT site? Is there a back door somewhere?
Imma_Thai said:
That makes things more complicated. Have you tried CRE2, and if so, how is it?
Thanks. Can you share with us how you grab beta firmware file from ATT site? Is there a back door somewhere?
Click to expand...
Click to collapse
No I havent tried it yet I took my mom on a mini vacation for mothers day last night and today and I'm just now getting home. I had the files downloaded but couldn't upload them because I didnt have internet out there.
Janitor87 said:
Hey. I downloaded and uploaded the new firmware. URL is : https://1drv.ms/u/s!AoONmYxVHYIpgY1AL1aSiGWfUBwsmQ
Who can share link on the BRC1 ?
Click to expand...
Click to collapse
Could you please download CRE2 for S7 flat (930) and put it in this thread https://forum.xda-developers.com/att-galaxy-s7/how-to/leaked-oreo-builds-t3780026/page4
who can upload G935AUCS4BRD1 firmware for Odin? Can you please share the link.
Also, I found this G935AUCS4BRD1-to-U4CRE2 version of firmware. SHould I upload this build for people?
Maybe we can create a Telegram chat for easy sharing link and news about a firmware?
Janitor87 said:
who can upload G935AUCS4BRD1 firmware for Odin? Can you please share the link.
Also, I found this G935AUCS4BRD1-to-U4CRE2 version of firmware. SHould I upload this build for people?
Maybe we can create a Telegram chat for easy sharing link and news about a firmware?
Click to expand...
Click to collapse
http://t.me/attoreo wait nevermind that's just a channel. Idk about telegram somebody else got this
branstonmorgan said:
http://t.me/attoreo
Click to expand...
Click to collapse
You created a group, not a chat. Can you please re-create again.
Thank you.
Related
Hi guys, there seem to be a couple of people with the same problem I am experiencing with the update to 5.1 on the XT1092 with EU roms.
I orignally was running on the UK ROM but due to an issue I flashed the EU rom onto the phone.
Im now stuck with; 22.21.19.victara_reteu.reteuall.en.EU retgb and whenever i try and do an update it says my software is up to date. I need the OTA link to update to 22.121.19.
Does anyone have a link for this ~12MB OTA anywhere? You'd be helping a lot of us out!
Update: I am flashing the GB Rom back to my XT1092 using the guide found here;
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
GB 5.0 XT1092 ROM
https://mega.co.nz/#!1JZFRbbb!rEhi3q...WQGFvcdMGEjZlA
GB 5.0.2 XT1092 OTA
https://mega.nz/#!vV8WnSbB!Zv1c6DGstUjqUQBkb4jRTANAD8TUbkuIpHhl0P18pEI
Cheers
Alex
I'm in the exact same situation.
Android Version: 5.0
System version: 22.21.19.victara_reteu.reteuall.en.EU.retgb
Build number: LXE22.46-19
I can't update because I can't get my hands on the update to 22.121.19. I can't find it anywhere.
Find the 5.0 XT1092 GB ROM on the link below, download and flash it so you're back on the right version (22.21.19.victara_retgb.retgball.en.GB). When you do you'll be able to download that small 12MB update from 'system udpates'.
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=filename&order=ASC&show=25&page=1
Stylus_XL said:
Find the 5.0 XT1092 GB ROM on the link below, download and flash it so you're back on the right version (22.21.19.victara_retgb.retgball.en.GB). When you do you'll be able to download that small 12MB update from 'system udpates'.
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=filename&order=ASC&show=25&page=1
Click to expand...
Click to collapse
I'm going to try that, I'll report back to this thread when I'm done, at least 4h from now, as FileFactory uploads at 70KB/s.
Kourkis said:
I'm going to try that, I'll report back to this thread when I'm done, at least 4h from now, as FileFactory uploads at 70KB/s.
Click to expand...
Click to collapse
Try the following mirror for RETGBALL_XT1092_5.0_LXE22.46-19_cid7_CFC.xml.zip taken from here:
https://mega.co.nz/#!1JZFRbbb!rEhi3q9Rte1ubLBcIYd6ry2ZmmgiFWQGFvcdMGEjZlA
thefunkydonkey said:
Try the following mirror for RETGBALL_XT1092_5.0_LXE22.46-19_cid7_CFC.xml.zip taken from here:
https://mega.co.nz/#!1JZFRbbb!rEhi3q9Rte1ubLBcIYd6ry2ZmmgiFWQGFvcdMGEjZlA
Click to expand...
Click to collapse
Doing god's work, thanks!
I'll come back and say if this worked in 20 minutes.
------------------------------------------------------------------------
Edit:
I got the small 12MB update now, step 1/2 successful!
Now we just have to wait for the 5.1 OTA for retgb I guess.
Thank you to Stylus_XL and thefunkydonkey for your help!
Kourkis said:
I got the small 12MB update now, step 1/2 successful!
Now we just have to wait for the 5.1 OTA for retgb I guess.
Thank you to Stylus_XL and thefunkydonkey for your help!
Click to expand...
Click to collapse
Do you still have the 12MB file? If possible, can you upload it somewhere?
onmyouji said:
Do you still have the 12MB file? If possible, can you upload it somewhere?
Click to expand...
Click to collapse
I'm really sorry, I didn't think about saving it before applying it.
Kourkis said:
I'm really sorry, I didn't think about saving it before applying it.
Click to expand...
Click to collapse
Hi,
I've just managed to capture that small file, I'm not allowed to link it though (new user, 10 posts needed). Ring back you all if you still need it.
j.e.d.
josecartman said:
Hi,
I've just managed to capture that small file, I'm not allowed to link it though (new user, 10 posts needed). Ring back you all if you still need it.
j.e.d.
Click to expand...
Click to collapse
You would be an absolute legend Just do 10 posts on this thread, lets have a conversation
What did you have for dinner??
aleckz999 said:
You would be an absolute legend Just do 10 posts on this thread, lets have a conversation
What did you have for dinner??
Click to expand...
Click to collapse
It is the uk update file, Blur_Version.22.21.19.victara_retgb.retgball.en.GB.zip, if anyone needs.
I couldn't find the eu version anywhere as well.
Yeah, im gonna flash the UK rom back onto my phone tonight, if you can post the link that would be grand
aleckz999 said:
Yeah, im gonna flash the UK rom back onto my phone tonight, if you can post the link that would be grand
Click to expand...
Click to collapse
Really? All right, let's collect some posts.
---------- Post added at 07:05 PM ---------- Previous post was at 07:01 PM ----------
josecartman said:
Really? All right, let's collect some posts.
Click to expand...
Click to collapse
You've already managed to download the ca. 1.14 GB RETGBALL_XT1092_5.0_LXE22.46-19_cid7_CFC.xml, haven't you?
if anyone wants the UK 12MB 5.0.2 OTA its here
Courtesy of Josecartman
https://mega.nz/#!vV8WnSbB!Zv1c6DGstUjqUQBkb4jRTANAD8TUbkuIpHhl0P18pEI
aleckz999 said:
if anyone wants the UK 12MB 5.0.2 OTA its here
Courtesy of Josecartman
https://mega.nz/#!vV8WnSbB!Zv1c6DGstUjqUQBkb4jRTANAD8TUbkuIpHhl0P18pEI
Click to expand...
Click to collapse
Thanks for posting it so nicely, mate.
Thanks, I have moved back to the UK rom now too. Hopefully we will get the 5.1 update soon.
What I don't understand is when we changed over to the EU version why that disabled our OTA updates.
Yeah, I havnt seen anyone explain why it happens. Its very odd, let me know if you are getting OTAs after flashing the UK rom, I havnt done it yet as It took about 4 hours last night to download the UK image.
Hi,
I saw your post. Id love to have the small ota zip, thanks!
Cheers
Sent from my XT1092 using XDA Free mobile app
---------- Post added at 06:15 PM ---------- Previous post was at 06:13 PM ----------
rakesh84 said:
What I don't understand is when we changed over to the EU version why that disabled our OTA updates.
Click to expand...
Click to collapse
The phone introduces itself as retGB, we'll never get OTA notifications while we are on retEU. It's better to return to retGB even if for that locale 5.1 is not yet available.
Sent from my XT1092 using XDA Free mobile app
aleckz999 - I can confirm I received the 12mb OTA update last night after i flashed the UK rom back.
thefunkydonkey said:
The phone introduces itself as retGB, we'll never get OTA notifications while we are on retEU. It's better to return to retGB even if for that locale 5.1 is not yet available.
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your reply. Please could you elaborate? not sure I understand what you mean by "introduces itself as retgb.
I had previously thought the reason I did not receive updates is because my phone is rooted. What I should have done was unroot while on the EU rom to test if i got a 12mb OTA. aleckz999 if you are still on the EU rom maybe you should try that first?
Now that I am back on the UK rom i have rooted my phone while I wait for 5.1. When I see reports on here that 5.1 is rolling out in the UK will see if i get the OTA and if not unroot to see if I get it.
I have an unlocked bootloader and havn't rooted, still don't recieve the OTAs on the EU rom.
Does anyone have the instructions with the apps that I need to flash the ROM back to GB? I havnt done this for 7 months and I am struggling to find mfastboot
I have got this from the offical bbs in Chinese half a day ago.
Sorry for submit it here , but I can't send it to ROMS, cause I'm a new user on XDA.
MEGA
https://mega.nz/#!FVZVhCJC!b1nzvJARK8YeuwET6xUX7SWFOsWz_11BUl6lrEz61m4
Google Drive
https://drive.google.com/open?id=0B6b9XSOuKWw9Vmc1cjZHcHlMYUE
AndroidFileHost(not uploaded by myself,Page8-4)
https://www.androidfilehost.com/?fid=24591000424941790
You can use TWRP and stock recovery flash this ROM.
It's an official ROM and signed by OP.
I have done nothing to this ROM.
Use adb sideload and stock recovery is the best way to flash it.
And it's easy to flash from H2OS to this one.Use the Setting-System update function and choose this ROM from your Storage.
Could someone add a changelog or any information about the changes they made? Could not find it on the web.
It's a pretty fast update, maybe they optimized ram management?
Works totally fine, no idea what it does though.
Please tell if ram management is fixed
sid_the_stunner said:
Please tell if ram management is fixed
Click to expand...
Click to collapse
Pray to the Dark Lord Cthulhu that they fixed it
Not working for me...
NexusPenguin said:
Not working for me...
Click to expand...
Click to collapse
Make sure you're using the latest ADB when sideloading. Didn't work for me on an older verison.
No idea about the RAM management, nothing decent to compare it to.
Kalone said:
I have got this from the offical bbs in Chinese half a day ago.
Sorry for submit it here , but I can't send it to ROMS, cause I'm a new user on XDA.
From MEGA
https://mega.nz/#!FVZVhCJC!b1nzvJARK8YeuwET6xUX7SWFOsWz_11BUl6lrEz61m4
From Google Drive
https://drive.google.com/open?id=0B6b9XSOuKWw9Vmc1cjZHcHlMYUE
Click to expand...
Click to collapse
Thanks for this dude
blackalice said:
Works totally fine, no idea what it does though.
Click to expand...
Click to collapse
This is just the stock firmare came with your device.I think someone may need it.
You known, who want to flash back from third party ROM.
sid_the_stunner said:
Please tell if ram management is fixed
Click to expand...
Click to collapse
Sorry, but this may be the stock firmare came with your device.
Just for someone who want to flash back to stock ROM.
They didn't provide it on oneplus.net as soon as I known, so I just got it for you from Oneplus's Chinese offical bbs.
NexusPenguin said:
Not working for me...
Click to expand...
Click to collapse
Kalone said:
Sorry, but this may be the stock firmare came with your device.
Just for someone who want to flash back to stock ROM.
They didn't provide it on oneplus.net as soon as I known, so I just got it for you from Oneplus's Chinese offical bbs.
Click to expand...
Click to collapse
Actually it updated me from 3.1.2 to 3.1.3
blackalice said:
Actually it updated me from 3.1.2 to 3.1.3
Click to expand...
Click to collapse
Oh, oneplus already provide OTA update for you of this version.
This must useless to most people.
I am glad that you update with this package.
I recieved this update, but there is a bug with the alert slider and ringtones in it.
After a restart of your device, the ringtone is muted.
That's why I switched to RR.
BTW Is it 3.1.2 or 3.1.3 ? Because in my mirrors thread, I have posted it as 3.1.2 and also the thread says it is 3.1.2 . Can anyone please confirm ?
Thanks
Sent from my OnePlus2 using XDA Labs
Can i flash this update in TWRP? i m on 3.1.0 Version and Rooted
Naman Bhalla said:
BTW Is it 3.1.2 or 3.1.3 ? Because in my mirrors thread, I have posted it as 3.1.2 and also the thread says it is 3.1.2 . Can anyone please confirm ?
Thanks
Click to expand...
Click to collapse
I have flashed it . The setting -about says it's 3.1.3
House.m.d said:
Can i flash this update in TWRP? i m on 3.1.0 Version and Rooted
Click to expand...
Click to collapse
I think you could backup your old system and data.
Then flash it.
Just have a try.
Kalone said:
I have flashed it . The setting -about says it's 3.1.3
Click to expand...
Click to collapse
Thanks. Corrected my thread
Sent from my OnePlus2 using XDA Labs
Kalone said:
I think you could backup your old system and data.
Then flash it.
Just have a try.
Click to expand...
Click to collapse
Ok, made a backup and flashed in recovery and wipded Cache and Dalvik.
No Problem. Now on OxygenOS 3.1.3.
Edit: Must flash SuperSU for Root once again
Kalone said:
I have got this from the offical bbs in Chinese half a day ago.
Sorry for submit it here , but I can't send it to ROMS, cause I'm a new user on XDA.
From MEGA
https://mega.nz/#!FVZVhCJC!b1nzvJARK8YeuwET6xUX7SWFOsWz_11BUl6lrEz61m4
From Google Drive
https://drive.google.com/open?id=0B6b9XSOuKWw9Vmc1cjZHcHlMYUE
Click to expand...
Click to collapse
Where did you get this update from? Can you check the forum again as the phone now says there is a new update available
---------- Post added at 12:22 AM ---------- Previous post was at 12:21 AM ----------
Anybody knows where the update gets downloaded to before getting flashed? TWRP people can pull it from there then flash it manually as it doesn't update otherwise
just read this on the OP forums. I am running stock 3.2.8 and waiting for stable versions of Nougat but if any one of you guys can verify if this is real go at it: (at your own risk)
https://forums.oneplus.net/threads/o...leaked.479065/
People on the OP forum says it works, welp, i'll download it but wait for an official news before installing it, i was waiting for this one to finally install Nougat on my OP (wow the download speed is ****ty af)
Lymnoreia said:
People on the OP forum says it works, welp, i'll download it but wait for an official news before installing it, i was waiting for this one to finally install Nougat on my OP (wow the download speed is ****ty af)
Click to expand...
Click to collapse
Same here. i need a working Android Pay also. im at 3 hrs now until its downloaded
36dbldz said:
Same here. i need a working Android Pay also. im at 3 hrs now until its downloaded
Click to expand...
Click to collapse
Android Pay working on this build for me, it seems. Took the risk and seems to be legit. B8 I had only minor issues with but this already seems a little smoother, it passes Safetynet (B8 did not) and I was able to add cards to AP whereas with B8 I couldnt.
Thread seems to be deleted. Was somebody able to download it before?
The link is still up, here it is :
http://otafs.coloros.com/patch/amaz...6_OTA_017_all_1612100017_e33769e042ed496e.zip
It's very slow to download though.
Anybody with a screenshot of the post maybe? Thread has definitely been removed :L
---------- Post added at 11:19 ---------- Previous post was at 11:18 ----------
Dear God that's slow, and I'm on my school's internet.....
Here is the post with the link (working)
https://forums.oneplus.net/threads/...t-for-oneplus-3.476660/page-214#post-15471301
TheBishopOfSoho said:
Android Pay working on this build for me, it seems. Took the risk and seems to be legit. B8 I had only minor issues with but this already seems a little smoother, it passes Safetynet (B8 did not) and I was able to add cards to AP whereas with B8 I couldnt.
Click to expand...
Click to collapse
Great news! if you have the file mirror it.
The thread has been deleted from oneplus forum.But I have downloaded it.
situ1962 said:
The thread has been deleted from oneplus forum.But I have downloaded it.
Click to expand...
Click to collapse
hey can you share the file name .. im downloading it
just wanna make sure if its legit or not
t-shock said:
Here is the post with the link (working)
https://forums.oneplus.net/threads/...t-for-oneplus-3.476660/page-214#post-15471301
Click to expand...
Click to collapse
You have a OP3 now? Loved Basic Plus on S7E :good:
liam_davenport said:
You have a OP3 now? Loved Basic Plus on S7E :good:
Click to expand...
Click to collapse
Well yes Thanks
I was bored of the S7E and I changed to OP3 and I like it even more
All systems nominal. Don't know what the change log is though, it doesn't show up in the updater.
Any1 flashed it on OB7 or we need to be on OB8 to flash it?
I am on FreedomOS nougat.
They still did not bring back volume down to vibrate.
What are their devs paid for, new accent colors?!?!
sidhg said:
hey can you share the file name .. im downloading it
just wanna make sure if its legit or not
Click to expand...
Click to collapse
It's the same.
http://otafs.coloros.com/patch/amaz...6_OTA_017_all_1612100017_e33769e042ed496e.zip
MoDmO said:
Any1 flashed it on OB7 or we need to be on OB8 to flash it?
I am on FreedomOS nougat.
Click to expand...
Click to collapse
I would wait for the official build if I was you op removed the link for thread there must be a reason for it
Can someone mirror the link? Im only getting 40+ kB/s.
jiyoohji said:
Can someone mirror the link? Im only getting 40+ kB/s.
Click to expand...
Click to collapse
I have the zip file
Let me upload it on AFH
When I try to use wireless update it gives me a not
found error?
sirivan98 said:
When I try to use wireless update it gives me a not
found error?
Click to expand...
Click to collapse
What version are you on,? Is it stock?
mrmazak said:
What version are you on,? Is it stock?
Click to expand...
Click to collapse
I also have the same problem. I have a stock 6.0 android. This problem happend to me when I got my phone 3 days ago.
mrmazak said:
What version are you on,? Is it stock?
Click to expand...
Click to collapse
Yes it is stock just got it three days ago as other user said.
mrmazak said:
What version are you on,? Is it stock?
Click to expand...
Click to collapse
Maybe I could use the local update option on wireless update if i can find a file for the update?
sirivan98 said:
Maybe I could use the local update option on wireless update if i can find a file for the update?
Click to expand...
Click to collapse
Could work. But need too get update that starts at same version you are on.
mrmazak said:
Could work. But need too get update that starts at same version you are on.
Click to expand...
Click to collapse
Says I'm on 6.1 generic
I'm running into this exact same issue. received my phone a few days ago and it gives the "not found" error when trying to download the update.
My device says it's current: "BLU_R0010UU_V6.6_GENERIC 23-08-2016 20:17"
It says it's trying to download: "BLU_R0010UU_V7.4.2_GENERIC_6.0_20161109-1343"
Does anyone have the update file for this so i can do a local update?
Sainiku said:
I'm running into this exact same issue. received my phone a few days ago and it gives the "not found" error when trying to download the update.
My device says it's current: "BLU_R0010UU_V6.6_GENERIC 23-08-2016 20:17"
It says it's trying to download: "BLU_R0010UU_V7.4.2_GENERIC_6.0_20161109-1343"
Does anyone have the update file for this so i can do a local update?
Click to expand...
Click to collapse
Forum has a guides section.
there is an index there
link for firmware
then ota
(https://forum.xda-developers.com/showpost.php?p=67904007&postcount=3)
Won't Update
I'm getting the same error.
mrmazak said:
Forum has a guides section.
there is an index there
link for firmware
then ota
(https://forum.xda-developers.com/showpost.php?p=67904007&postcount=3)
Click to expand...
Click to collapse
I did check the guide, and that firmware/OTA post.
If you had actually checked the OTA links, you'd see that the needed update isn't there. The last OTA available to download from the guide is 6.6, which i'm already on.
I've sent in a ticket through the update app and hopefully they'll reply soon.
Sainiku said:
I did check the guide, and that firmware/OTA post.
If you had actually checked the OTA links, you'd see that the needed update isn't there. The last OTA available to download from the guide is 6.6, which i'm already on.
I've sent in a ticket through the update app and hopefully they'll reply soon.
Click to expand...
Click to collapse
The op in this thread said he was on 6.1
mrmazak said:
The op in this thread said he was on 6.1
Click to expand...
Click to collapse
Ah. You had replied to my post so I thought you were replying to me.
This probably has something to do with the new firmware their rolling out. Hopefully it'll get resolved soon.
Sainiku said:
Ah. You had replied to my post so I thought you were replying to me.
This probably has something to do with the new firmware their rolling out. Hopefully it'll get resolved soon.
Click to expand...
Click to collapse
Honestly, you are here on XDA a developers site. I would have thought you would be happy to have the updates not working since you can just load custom recovery and flash roms made available from community.
mrmazak said:
Honestly, you are here on XDA a developers site. I would have thought you would be happy to have the updates not working since you can just load custom recovery and flash roms made available from community.
Click to expand...
Click to collapse
You'd think that!
Truth is, I couldn't find a single mention of this issue anywhere online, except here.
I've rooted phones before (using guides from XDA even), but i'm not in a position to load custom firmware on this particular phone. I'm using it as a cheap work-phone and the company i work for explicitly require the device not to be rooted or the OS modified in any unofficial way unless needed for development. But XDA is a good resource for finding stock images and is the most active online resource I trust when it comes to android phones.
I contacted Blu and they told me to delete the app data but it still didn't work for me. Also my update is V7.4.2
mrmazak said:
Could work. But need too get update that starts at same version you are on.
Click to expand...
Click to collapse
Any ideas?
sirivan98 said:
Any ideas?
Click to expand...
Click to collapse
I don't.
There are some updates "captured" from other users posted in the forum. Up to v6.6 is listed in the index , linked already.
This link is for update from 7.4.2 up to 8.3
https://forum.xda-developers.com/showpost.php?p=72128380&postcount=2
and here too (same 7.4.2 to 8.3)
https://forum.xda-developers.com/showpost.php?p=72146824&postcount=37
But if the OTA app is not working maybe there is something else wrong.
Do you have sdcard installed? (shouldn't mater but if so try removing it)
Are you connected to wifi?
Maybe Blu is blocking updates because they had posted that roll back.
mrmazak said:
I don't.
There are some updates "captured" from other users posted in the forum. Up to v6.6 is listed in the index , linked already.
This link is for update from 7.4.2 up to 8.3
https://forum.xda-developers.com/showpost.php?p=72128380&postcount=2
and here too (same 7.4.2 to 8.3)
https://forum.xda-developers.com/showpost.php?p=72146824&postcount=37
But if the OTA app is not working maybe there is something else wrong.
Do you have sdcard installed? (shouldn't mater but if so try removing it)
Are you connected to wifi?
Maybe Blu is blocking updates because they had posted that roll back.
Click to expand...
Click to collapse
Just tried to local update from files you posted earlier and got a signature verification failed in bios. Will try to remove and sd card now and get back here
mrmazak said:
I don't.
There are some updates "captured" from other users posted in the forum. Up to v6.6 is listed in the index , linked already.
This link is for update from 7.4.2 up to 8.3
https://forum.xda-developers.com/showpost.php?p=72128380&postcount=2
and here too (same 7.4.2 to 8.3)
https://forum.xda-developers.com/showpost.php?p=72146824&postcount=37
But if the OTA app is not working maybe there is something else wrong.
Do you have sdcard installed? (shouldn't mater but if so try removing it)
Are you connected to wifi?
Maybe Blu is blocking updates because they had posted that roll back.
Click to expand...
Click to collapse
Removing SD card didn't help, any way of getting past the signature verification thing?
I have unlocked SM-N960U and I seem to be unable to get Samsung+ to display the banner for oneUI beta, I then tried several times to do it manually by doing ODIN but I keep getting port problem even after uninstalling and reinstalling the USB cable driver and restarting the computer.
I followed these instructions as posted in another thread
https://www.droidmodders.com/viewtopic.php?f=5&t=6&p=9#p9
https://forum.xda-developers.com/galaxy-note-9/how-to/galaxy-note-9-android-9-pie-beta-t3870521
sillyshyme said:
I have unlocked SM-N960U and I seem to be unable to get Samsung+ to display the banner for oneUI beta, I then tried several times to do it manually by doing ODIN but I keep getting port problem even after uninstalling and reinstalling the USB cable driver and restarting the computer.
I followed these instructions as posted in another thread
https://www.droidmodders.com/viewtopic.php?f=5&t=6&p=9#p9
https://forum.xda-developers.com/galaxy-note-9/how-to/galaxy-note-9-android-9-pie-beta-t3870521
Click to expand...
Click to collapse
Don't use Odin with that firmware. That's not for your device. That's for N960F. Yours is N960U. I believe you have the snapdragon version. This firmware is for the exynos model. Please be careful not to brick your phone. Always properly read the instructions and thread titles.
Maybe someone else can help you with the snapdragon pie version as I own the exynos model. Good luck.
That xda link you posted is also for N960F. Be careful.
sillyshyme said:
I have unlocked SM-N960U and I seem to be unable to get Samsung+ to display the banner for oneUI beta, I then tried several times to do it manually by doing ODIN but I keep getting port problem even after uninstalling and reinstalling the USB cable driver and restarting the computer.
I followed these instructions as posted in another thread
https://www.droidmodders.com/viewtopic.php?f=5&t=6&p=9#p9
https://forum.xda-developers.com/galaxy-note-9/how-to/galaxy-note-9-android-9-pie-beta-t3870521
Click to expand...
Click to collapse
The beta is closed now. And there's no reason to start a whole new thread. There's already a out four threads talking about installing the beta on Snapdragon devices. Use the search bar. Read those threads. If you can't find your answers, then you can ask questions in a pre-existing thread. Although considering the EXACT steps you need to take to install the beta have been spelled out several times (many time by me in various threads), you will find your answers if you take time to look for them.
Honestly though, and I'm genuinely not trying to be mean, but if you have not researched enough to know what version of trh Note 9 you have, or the differences in the versions of the Note 9 or consequences of flashing the wrong firmware, then playing around ODIN is not for you. You need to do some reading and research before you irreversibly brick your thousand dollar phone.
I too have an Xfinity phone and these are the steps I took.
Download this: https://forum.xda-developers.com/attachment.php?attachmentid=4446947
Then download this: https://drive.google.com/file/d/1EjEBXYyIow-TAateuJAON-gpnrcS9mQA/view?usp=sharing
Unzip and flash via patched Odin
Then download this: https://firmware.science/download?url=7159/1488/SS-N960USQS1ARJA-to-U1CRL4-UP
and follow these instructions: https://firmware.science
cshort0982 said:
I too have an Xfinity phone and these are the steps I took.
Download this: https://forum.xda-developers.com/attachment.php?attachmentid=4446947
Then download this: https://drive.google.com/file/d/1EjEBXYyIow-TAateuJAON-gpnrcS9mQA/view?usp=sharing
Unzip and flash via patched Odin
Then download this: https://firmware.science/download?url=7159/1488/SS-N960USQS1ARJA-to-U1CRL4-UP
and follow these instructions: https://firmware.science
Click to expand...
Click to collapse
He was asking about the beta. That's not the beta.
Mr. Orange 645 said:
He was asking about the beta. That's not the beta.
Click to expand...
Click to collapse
Yes that would be android pie
cshort0982 said:
Yes that would be android pie
Click to expand...
Click to collapse
That IS Android Pie, but the build you linked him to is NOT the beta.
Mr. Orange 645 said:
That IS Android Pie, but the build you linked him to is NOT the beta.
Click to expand...
Click to collapse
Pretty sure the beta is closed
cshort0982 said:
Pretty sure the beta is closed
Click to expand...
Click to collapse
you can still install the update.zip from your sdcard
cshort0982 said:
Pretty sure the beta is closed
Click to expand...
Click to collapse
Yes. The beta is closed. But you can go to firmware.science and download the beta update zip. ZRKP.
Again, what you linked him to is NOT the Pie beta or the beta build.
Thanks guys I will just do that.
Mr. Orange 645 said:
Yes. The beta is closed. But you can go to firmware.science and download the beta update zip. ZRKP.
Again, what you linked him to is NOT the Pie beta or the beta build.
Click to expand...
Click to collapse
cshort0982 said:
I too have an Xfinity phone and these are the steps I took.
Download this: https://forum.xda-developers.com/attachment.php?attachmentid=4446947
Then download this: https://drive.google.com/file/d/1EjEBXYyIow-TAateuJAON-gpnrcS9mQA/view?usp=sharing
Unzip and flash via patched Odin
Then download this: https://firmware.science/download?url=7159/1488/SS-N960USQS1ARJA-to-U1CRL4-UP
and follow these instructions: https://firmware.science
Click to expand...
Click to collapse
I'm thinking about trying out the Pie Beta and wanted to try this.
It looks like you're using odin to flash the phone to a firmware thats compatible with the beta update, and than using the traditional update method to actually update to Pie.
I'm really nervous about doing this since I can't find original versions of my firmware (Meaning I can't go back), did everything still work for you? My understanding is that the feature you might lose is Wifi calling, which is an important reason why Xfinitity is so much cheaper.
If you download and run Phone INFO by *Samsung* (Not quotes, stars), does it say your CSC code is CCT?
Thanks
deisama said:
I'm thinking about trying out the Pie Beta and wanted to try this.
It looks like you're using odin to flash the phone to a firmware thats compatible with the beta update, and than using the traditional update method to actually update to Pie.
I'm really nervous about doing this since I can't find original versions of my firmware (Meaning I can't go back), did everything still work for you? My understanding is that the feature you might lose is Wifi calling, which is an important reason why Xfinitity is so much cheaper.
If you download and run Phone INFO by *Samsung* (Not quotes, stars), does it say your CSC code is CCT?
Thanks
Click to expand...
Click to collapse
Wifi calling is working for me on the CRL9. Yes Xfinity phone are CCT.
Here is the link for the only CCT firmware I have found: https://www.sammobile.com/firmwares/galaxy-note9/SM-N960U/CCT/
It will update a few times if you have to revert back.
cshort0982 said:
Wifi calling is working for me on the CRL9. Yes Xfinity phone are CCT.
Here is the link for the only CCT firmware I have found: https://www.sammobile.com/firmwares/galaxy-note9/SM-N960U/CCT/
It will update a few times if you have to revert back.
Click to expand...
Click to collapse
Thanks man, I appreciate the confirmation.
I looked through your history to see if you'd already answered it and noticed that you are also coming from and HTC M8.
You've got great taste in phones
All the links I find to the PIE firmware to flash it are not working and the signup for the beta is closed now. Can someone please post or send me a message to a link to get it
Detroit Amerson said:
All the links I find to the PIE firmware to flash it are not working and the signup for the beta is closed now. Can someone please post or send me a message to a link to get it
Click to expand...
Click to collapse
Go to the main beta thread in the guides and discussion section. The files you need are linked there.
The firmware.science site is no logner running and thats the only links I see. Did I miss something?
Detroit Amerson said:
The firmware.science site is no logner running and thats the only links I see. Did I miss something?
Click to expand...
Click to collapse
Yes you did. You need to go to the main beta thread and do some reading. The updates are linked directly there.