Database Develop

Lenovo a7000-a won't boot & can't enter to recovery

Hello, i have spartphone Lenovo a7000-a, with TWRP Recovery and custom rom "Resurrection remix". When i wanted to update rom to newer version, mobile stuck on booting, and he falled to endless restarting. I can't enter to recovery, i can't do anything with mobile.
i used smart phone flash tool, with stock rom, but tool can't find my mobile.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Mobile stuck on this screen, and sometimes restarts and again stuck on this screen.
i hope that anybody can help me, I don't know what else to do. Many thanks for helping

Firstly, install mediatek vcom drivers, don't use the add hardware option in device manager. Right click proper .inf file in explorer and click install, click continue with the installation on the warning prompt. If you are on Windows 8/8.1/10 search for how to install unsigned drivers and do the same. Then download the twrp package from this forum. It should have boot.img and recovery.img . Install with sp flash tool, select the scatter file from the folder and make sure both boot and recovery are ticked. Go to options ->download and make sure both checksums are ticked. SP flash tool dropdown menu should show download only. Click download/start/whatever and connect powered off phone with a good data cable. Flash should start and it'll finish soon. Now disconnect data cable, press both volume buttons firmly and press power button. Don't let go unless you see a Lenovo logo. It should boot into TWRP. You custom ROM may not boot but now you have TWRP.
Edit: Here is the TWRP link http://forum.xda-developers.com/lenovo-a7000/development/twrp-recovery-lenovo-a7000-mm-t3358436. Do NOT untick boot.img. If you can't get to recovery you must flash boot.img as well

fingerwarrior said:
Firstly, install mediatek vcom drivers, don't use the add hardware option in device manager. Right click proper .inf file in explorer and click install, click continue with the installation on the warning prompt. If you are on Windows 8/8.1/10 search for how to install unsigned drivers and do the same. Then download the twrp package from this forum. It should have boot.img and recovery.img . Install with sp flash tool, select the scatter file from the folder and make sure both boot and recovery are ticked. Go to options ->download and make sure both checksums are ticked. SP flash tool dropdown menu should show download only. Click download/start/whatever and connect powered off phone with a good data cable. Flash should start and it'll finish soon. Now disconnect data cable, press both volume buttons firmly and press power button. Don't let go unless you see a Lenovo logo. It should boot into TWRP. You custom ROM may not boot but now you have TWRP.
Edit: Here is the TWRP link http://forum.xda-developers.com/lenovo-a7000/development/twrp-recovery-lenovo-a7000-mm-t3358436. Do NOT untick boot.img. If you can't get to recovery you must flash boot.img as well
Click to expand...
Click to collapse
Hi i tried your way, but i got error error.
here is how i proceeded:
where i made a mistake?

There are two possibilities here,
1. Your phone is not really A7000, rather it is A7000 plus or turbo
2. The installed partitions are different enough that SP Flash tool refuses to flash it.
You can try to flash the stock rom S228 if you are sure it is lenovo A7000. If it again throws out same error and you are perfectly SURE it is lenovo a7000, you can try to format first and then flash the rom, although it is not recommended.

fingerwarrior said:
There are two possibilities here,
1. Your phone is not really A7000, rather it is A7000 plus or turbo
2. The installed partitions are different enough that SP Flash tool refuses to flash it.
You can try to flash the stock rom S228 if you are sure it is lenovo A7000. If it again throws out same error and you are perfectly SURE it is lenovo a7000, you can try to format first and then flash the rom, although it is not recommended.
Click to expand...
Click to collapse
1.) I have lenovo a7000-a
2.) I also tried a7000-a stock firmware, but when i downloaded it via SPFlashTool, downloading stuck at Download DA 100% and then i get timeout.
EDIT:
it seems that, mobile is soft-bricked, without recovery.
But i can enter to META mode & FACTORY mode. I can Flash (via SPFlashTool) but it stucks at Download DA 100% (on red line).
Downloading stuck on this screen and then i get Timeout.

Powering said:
1.) I have lenovo a7000-a
2.) I also tried a7000-a stock firmware, but when i downloaded it via SPFlashTool, downloading stuck at Download DA 100% and then i get timeout.
EDIT:
it seems that, mobile is soft-bricked, without recovery.
But i can enter to META mode & FACTORY mode. I can Flash (via SPFlashTool) but it stucks at Download DA 100% (on red line).
Downloading stuck on this screen and then i get Timeout.
Click to expand...
Click to collapse
I also have Lenovo a7000-a. Tried flashing stocks roms (as per other thread) as stock ROM but still gets grey screen and white lines.
What ROM build number are you using. Can you share the link?
I just want to revert back to original (stock) ROM and make it work again.
Sent from my Pixel XL using Tapatalk
---------- Post added at 01:03 PM ---------- Previous post was at 01:02 PM ----------
fingerwarrior said:
There are two possibilities here,
1. Your phone is not really A7000, rather it is A7000 plus or turbo
2. The installed partitions are different enough that SP Flash tool refuses to flash it.
You can try to flash the stock rom S228 if you are sure it is lenovo A7000. If it again throws out same error and you are perfectly SURE it is lenovo a7000, you can try to format first and then flash the rom, although it is not recommended.
Click to expand...
Click to collapse
What's the stock ROM for Lenovo a7000-a? I have grey screen and white lines.
Sent from my Pixel XL using Tapatalk

Bro i advise you to follow the below link and download the stock rom again and flash it again by spflashtool
And follow every step as mentioned in the below link
http://forum.xda-developers.com/lenovo-a7000/development/flashing-stock-rom-via-sp-flash-t3364235

PrashantRana said:
Bro i advise you to follow the below link and download the stock rom again and flash it again by spflashtool
And follow every step as mentioned in the below link
http://forum.xda-developers.com/lenovo-a7000/development/flashing-stock-rom-via-sp-flash-t3364235
Click to expand...
Click to collapse
I tried this, but process stucks at "Download flash 0%" (yellow bar)

Powering said:
I tried this, but process stucks at "Download flash 0%" (yellow bar)
Click to expand...
Click to collapse
as your download is not starting so it may be possible that driver are not correctly installed

Unbrick P9 single sim (using DC Phoenix)

There are many cases of people recovering their bricked phones but their solutions arent so clear when browsing the thread. For example, threads get abandoned once their phone was recovered, leaving people like me confused or stranded. I decided after days of trying to recover my phone share what I did to revive my P9. I hope this can help you.
Disclaimer***
- DC Phoenix costs 15 euros for 15 credits to use for 72h after initial flash (small price to pay compared to sending to repair shop or having a useless brick).
- i am NOT responsible for what you do to your phone if it broke
- this is what worked for ME, but im confident it would work for yours but no guarantees
- please read as it might give you some background information
- Bootloader code changes
- serial number resets to ABCDEF012345678
As most people on XDA, we like to flash stuff on to our phones. I was on EMUI 4.1 MM and I wanted to update to EMUI 5 Nougat. I did so successfully by installing twrp, flashing C432 oem info, and flashing B136 via SD card force update, and then using software update in the settings app to B182. Finally, I managed to flash B361 nougat via HuaweiUpdater2.0 and HiSuite.
Then, I decided to try and root my P9 but somewhere along the way, which I cant remember, I flashed the wrong recovery or something and my phone wouldn't boot - it was stuck at the huawei boot logo. I panicked and tried doing all these things using SRK tools, and HiSuite recovery mode, and eventually I was left with a super hard bricked P9. And for the next 3 days I tried all sorts of stuff to recover my phone. I really think I had tried everything (except sending to repair shop). Believe me, I think I had all of the symptoms of everyone in other threads along the way of trying to recovery it. I downloaded about 4 - 6 firmware files just trying to flash and flash but it kept being stuck at 5% or some error. I even bought the 15 euro credit to use DC Phoenix, which allowed me to flash the firmwares but it didn't change anything besides making my semi brick to brick again vice versa.. Nothing seemed to work. This was using Method 1 in their unbricking guide.
What worked.
There was a second method in the DC Phoenix unbricking guide, but the reason I didn't consider this method is because it required me to flash my P9's image file (.dgtks file) which seemingly can only be downloaded from DC Phoenix's download page (searched everywhere but nada). There is only the P9 Dual SIM image file, and I was afraid that this would have been very bad to flash. But in the end I had no real choice cause my warranty was void when I'd unlocked my bootloader.
Here's what I did:
Using DC Phoenix's guide, follow the steps for method 2.
When the guide points you to downloading the image file, find the image for EVA-AL10 (P9 Dual SIM) and flash it.
I followed the exact steps in the guide for method 2. *dont forget to remove your sd card during the process*
Once the flashing has finished, it should boot up briefly to encrypt the storage and reboot into update install screen. If not, then the phone should be fully booted up. There are no themes or any useful apps at this stage.
At this point you must flash your desired firmware using the force update method.
Simple - copy the dload folder of your firmware on to your sd card. On the home screen of your phone, there should be a tool (sorry i cant remember which) and once opened to have an option to force update via sd card. click that and you should be all good with your working phone. In my case, I wanted to flash the firmware EVA-L09C432B136. I copied its contents into the sdcards dload and flashed it without a hitch (i even got ota updates).
Please ask questions if you are unsure because I've probably missed some important stuff.
EDIT:
After flashing with DC Phoenix, for some reason the serial number becomes ABCDEF0123456789, and the bootloader unlock code changes, so the code is different from what you would get from the Huawei bootloader code

Thanks ever so much for above. I was bricked into a corner for the last day or so!

You are a life saver. I had accidentally installed the NRD90M test-keys version of Android N. Caused all sorts of issues. One of the issues with NRD90M was the fact there was no keyboard installed. I relied on google voice. When it restarted it wanted to be reactivated against my google account. FRP Lock had enabled itself. I used a USB A to USB C adapter and physically connected a computer keyboard and was able to enter credentials. I used DC Phoenix to flash the EVA-AL10 firmware as you did. I then used their HCU software to change my vender and country to hw,eu. After doing that I had to use DC Phoenix again to reflash EVA-AL10. Once reflashed I used the Software app on the phone to install VIE-L09C432B180 from the SD Card. I am now all working with Android M using a C432 (eu) firmware on a New Zealand Huawei P9 Plus. I should be able to install Android N now OTF. Thanks for your detailed post.

Question: so moodie007, do you confirm me: on P9 PLUS you flashed at the start the AL10 version of the "standard" P9 ?
It's not clear:
Once reflashed I used the Software app on the phone to install VIE-L09C432B180 from the SD Card
Click to expand...
Click to collapse
What software app did you used to install that firmware? the standard eRecovery (Vol+ Vol - Pwr buttons?)

Thank you so much, you literally saved my life.

what is the DC Phoenix,is it the same as the sd card?

moodie007 said:
You are a life saver. I had accidentally installed the NRD90M test-keys version of Android N. Caused all sorts of issues. One of the issues with NRD90M was the fact there was no keyboard installed. I relied on google voice. When it restarted it wanted to be reactivated against my google account. FRP Lock had enabled itself. I used a USB A to USB C adapter and physically connected a computer keyboard and was able to enter credentials. I used DC Phoenix to flash the EVA-AL10 firmware as you did. I then used their HCU software to change my vender and country to hw,eu. After doing that I had to use DC Phoenix again to reflash EVA-AL10. Once reflashed I used the Software app on the phone to install VIE-L09C432B180 from the SD Card. I am now all working with Android M using a C432 (eu) firmware on a New Zealand Huawei P9 Plus. I should be able to install Android N now OTF. Thanks for your detailed post.
Click to expand...
Click to collapse
can you give me a username and code,I'm in china,I cannot buy it use Alipay .and my phone is bricked,would help me,thx.

Hmm i think my phone is bricked, im unable to get into the menu to update the Update.app file from the dload folder on the SD card, i cant even get the phone to switch off it just keeps restarting itself and freezing on the 'your device has been unlocked and cant be trusted' screen....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if i try and turn the phone of it just turns itself back on and freezes on that screen again
Im able to get to the Fastboot & recovery mode screen if i hold volume down button.......
and if i hold down both the volume and power buttons i get this screen....
and not the firmware update screen i should be getting.
It has been suggested that i need to use DC Phoenix program to fix the phone but will this work seeings as i cant even get the phone to boot or even switch off??

BlockABoots said:
Hmm i think my phone is bricked, im unable to get into the menu to update the Update.app file from the dload folder on the SD card, i cant even get the phone to switch off it just keeps restarting itself and freezing on the 'your device has been unlocked and cant be trusted' screen....

if i try and turn the phone of it just turns itself back on and freezes on that screen again
Im able to get to the Fastboot & recovery mode screen if i hold volume down button.......

and if i hold down both the volume and power buttons i get this screen....
if i try and turn the phone of it just turns itself back on and freezes on that screen again
Im able to get to the Fastboot & recovery mode screen if i hold volume down button.......

and if i hold down both the volume and power buttons i get this screen....

and not the firmware update screen i should be getting.
It has been suggested that i need to use DC Phoenix program to fix the phone but will this work seeings as i cant even get the phone to boot or even switch off??
Click to expand...
Click to collapse
Install twrp through fastboot. Go into twrp. From there you can find a fix for your phone. You can install oeminfo and flash ROM. Good luck

rhodondendron said:
Install twrp through fastboot. Go into twrp. From there you can find a fix for your phone. You can install oeminfo and flash ROM. Good luck
Click to expand...
Click to collapse
Does twrp work with Nougat fw then, as i thought it didnt??

BlockABoots said:
Does twrp work with Nougat fw then, as i thought it didnt??
Click to expand...
Click to collapse
Yes...
But boot in dl mode with power +- and stay ....BUT REMOVE CABLE.....

rayman95 said:
Yes...
But boot in dl mode with power +- and stay ....BUT REMOVE CABLE.....
Click to expand...
Click to collapse
Holding the power and volume buttons doesnt boot me into the force update screen though, instead i get this screen....

Try to install twrp in fastboot and reboot immediately without the cable...

BlockABoots said:
Does twrp work with Nougat fw then, as i thought it didnt??
Click to expand...
Click to collapse
Twrp work fine with nougat. Find thread called twrp P9 with decryption support emui 5.x. Work like charn

rhodondendron said:
Twrp work fine with nougat. Find thread called twrp P9 with decryption support emui 5.x. Work like charn
Click to expand...
Click to collapse
Says its for the PLUS model only.
Im trying to use command lines via adb but keep getting 'FAILED (remote: Command not allowed)' responses, any ideas?

BlockABoots said:
Says its for the PLUS model only.
Im trying to use command lines via adb but keep getting 'FAILED (remote: Command not allowed)' responses, any ideas?
Click to expand...
Click to collapse
Just try this dude. https://forum.xda-developers.com/p9/development/twrp-t3565703/page1

same problem
where the same problem sir BlockABoots hows your p9?

Alfombra said:
where the same problem sir BlockABoots hows your p9?
Click to expand...
Click to collapse
Its still bricked atm
---------- Post added at 08:24 PM ---------- Previous post was at 08:20 PM ----------
rhodondendron said:
Just try this dude. https://forum.xda-developers.com/p9/development/twrp-t3565703/page1
Click to expand...
Click to collapse
The issue im having when trying to adb to the phone is i keep getting a message saying 'FAILED (remote: Command not allowed)'.
If i type adb devices its showing no devices, its as if the PC cant detect the phone, but when i plug it into the PC it makes the USB connection sound and also if i run HiSuite it says there is no device connected but if i select the recovery option it then detects the phone but after checking says there are no available packages for my model

BlockABoots said:
Its still bricked atm
---------- Post added at 08:24 PM ---------- Previous post was at 08:20 PM ----------
The issue im having when trying to adb to the phone is i keep getting a message saying 'FAILED (remote: Command not allowed)'.
If i type adb devices its showing no devices, its as if the PC cant detect the phone, but when i plug it into the PC it makes the USB connection sound and also if i run HiSuite it says there is no device connected but if i select the recovery option it then detects the phone but after checking says there are no available packages for my model
Click to expand...
Click to collapse
From what I get, you still can go to fastboot&rescue mode right? Just flash twrp through fastboot. No need for adb dude. (use fastboot command instead of adb command dude)
You can't connect adb if you can't boot. From the twrp you can try to fix your phone. Maybe change the oeminfo, or flash a rom, even shutdown your phone to do three button rom install. Do you get what I am saying?

rhodondendron said:
From what I get, you still can go to fastboot&rescue mode right? Just flash twrp through fastboot. No need for adb dude. (use fastboot command instead of adb command dude)
You can't connect adb if you can't boot. From the twrp you can try to fix your phone. Maybe change the oeminfo, or flash a rom, even shutdown your phone to do three button rom install. Do you get what I am saying?
Click to expand...
Click to collapse
fastboot commands dont appear to work either, i was trying early on with a recovery file.....

[RECOVERY] TWRP for LG G6 H870 (unofficial)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CONGRATS TO @davidporter1010 ON THE FIRST EVER ROOTED LG G6!!!
Video review by @davidporter1010 https://www.youtube.com/watch?app=desktop&persist_app=1&noapp=1&v=alH4YEiV5bc
A message to those with other variants of the G6:
The H870 International variant is the only one with an official bootloader unlock from LG.
Should there be a time where your flashing mechanisms get cracked, simply mention my name on this thread or via private message and I would be happy to create a thread with TWRP for your device.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
BUILD 4
Do the captcha and then wait 3 seconds before pressing the get link button, close any ads or poups
You can donate here to help me buy an H870 and that way I can further contribute towards development:
paypal.me/VoRt3xElarixx
You can find the recovery here:
https://drive.google.com/file/d/0B7S6ou836i7AVjhjNlpqQTdoSlk/view
FULL STEPS FOR OBTAINING ROOT
Follow LG's bootloader unlocking instructions here before you begin!
1. Download the latest TWRP .img for your device from this thread
2. Use the same fastboot tool you downloaded in the LG unlock instructions to flash TWRP using the command:
Code:
fastboot flash recovery twrp-x.x.x-x-h870.img
* Replace x.x.x-x with the actual version you are flashing!
3. Enter "fastboot reboot recovery" into the fastboot tool
4. Swipe to allow modifications, then hit wipe and tap format data, type "yes" and press enter
3. Install SuperSU, or Magisk to gain root and make system bootable, or just flash
no DMvertity opt file to make system bootable without root
8. Go to [Reboot] -> [System].
Wait 2-5 minutes for your device to finish setting itself up.
Github:
https://github.com/Nima0003/TWRP-H870
CREDITS:
@jcadduono for the template of this thread @jimbomodder for helping me pull the stock recovery @Rashed97 for the early TWRP test build he did from source

1st

So...we are on the way to have a fully functional recovery??
i see all has stopped...lineage..twrp...
Hurry up....we need to flashhhhhh
ahahaa
thanks for all....

Nice hows this build to your last one have you submited it to twrp for official status ?

can't get this one to work, I have an italian h870 i guess it's an international version
unlocked via LG developer
downloaded platform tools from android studio
flashed twrp-3.1.1-0-h870.img, done this multiple times
fastboot flash recovery twrp-3.1.1-0-h870.img
target reported max download size of 536870912 bytes
sending 'recovery' (22824 KB)...
OKAY [ 0.505s]
writing 'recovery'...
OKAY [ 0.240s]
finished. total time: 0.746s
Click to expand...
Click to collapse
in this version of platfor tools i don't have the command to reboot into recovery so i reboot into system and then adb reboot recovery
done this the phone shows the broken android image and then reboots into system after few seconds
any help about it?
thanks

You're doing it wrong.
In order for TWRP to stick, you need to do this :
1. Flash the image like you did.
2. Don't reboob. Press vol down+power at the same time until the phone restarts. Keep pressing those buttons andWait for the lg logo to appear, then release power button.This way the menu for hard reset will appear. Confirm and voila, you will enter in TWRP.
---------- Post added at 02:39 PM ---------- Previous post was at 02:37 PM ----------
@nima0003 ,could you tell us why the old thread was closed?
I saw in recovery it shows H872, not H870. This means it's a rip off?

kimitza said:
You're doing it wrong.
In order for TWRP to stick, you need to do this :
1. Flash the image like you did.
2. Don't reboob. Press vol down+power at the same time until the phone restarts. Keep pressing those buttons andWait for the lg logo to appear, then release power button.This way the menu for hard reset will appear. Confirm and voila, you will enter in TWRP.
---------- Post added at 02:39 PM ---------- Previous post was at 02:37 PM ----------
@nima0003 ,could you tell us why the old thread was closed?
I saw in recovery it shows H872, not H870. This means it's a rip off?
Click to expand...
Click to collapse
Old thread was closed because the links I used to keep statistics were also pay per click links, and no it's not a rip-off, it's a port.

strikerdj2011 said:
Nice hows this build to your last one have you submited it to twrp for official status ?
Click to expand...
Click to collapse
Yes but I need help uploading sources to github as I am not fimaliar with git, if anyone knows how and can help me, we will have official builds.

piggarello said:
So...we are on the way to have a fully functional recovery??
i see all has stopped...lineage..twrp...
Hurry up....we need to flashhhhhh
ahahaa
thanks for all....
Click to expand...
Click to collapse
Nothing has stopped, I was very busy, and XDA locked my threads, also my PC wireless chip broke so I need a new one which I can't afford.

Cmon Devs..!!

piggarello said:
Cmon Devs..!!
Click to expand...
Click to collapse
Development hasn't stopped

Good new!

nima0003 said:
Yes but I need help uploading sources to github as I am not fimaliar with git, if anyone knows how and can help me, we will have official builds.
Click to expand...
Click to collapse
https://help.github.com/articles/adding-an-existing-project-to-github-using-the-command-line/

kimitza said:
You're doing it wrong.
In order for TWRP to stick, you need to do this :
1. Flash the image like you did.
2. Don't reboob. Press vol down+power at the same time until the phone restarts. Keep pressing those buttons andWait for the lg logo to appear, then release power button.This way the menu for hard reset will appear. Confirm and voila, you will enter in TWRP.
---------- Post added at 02:39 PM ---------- Previous post was at 02:37 PM ----------
@nima0003 ,could you tell us why the old thread was closed?
I saw in recovery it shows H872, not H870. This means it's a rip off?
Click to expand...
Click to collapse
Done this, the LG logo appears before and after the unlock warning but i can't enter reset mode in this way
It's volume down button not up? should i release and then repush the power button?
it seems that android bootlock warning screen interferes with the process

scarliga said:
Done this, the LG logo appears before and after the unlock warning but i can't enter reset mode in this way
It's volume down button not up? should i release and then repush the power button?
it seems that android bootlock warning screen interferes with the process
Click to expand...
Click to collapse
Once you flashed twrp in fastboot, disconnect from pc, the hold vol down+ power, keep holding until you see LG logo and then quickly let go of power button and re-press. It will then show stock recovery, follow instructions to do factory reset and it will boot twrp after showing LG logo again

Done, thank you
now got this error while wiping data
EDIT: something gone wrong with encryption, it wiped me data and removed recovery
When connected via USB in TWRP it shows as an H872 but it's an H870
I've flashed the open eu kdz with uppercut, is it related to it?
any guess about it?

nima0003 said:
Yes but I need help uploading sources to github as I am not fimaliar with git, if anyone knows how and can help me, we will have official builds.
Click to expand...
Click to collapse
If you are not familiar with git, vive gitkraken a try.
Also you can join twrp IRC Channel, they will give all the support you need.

Will there be any root options for the dual SIM version?

unknownblkman said:
Will there be any root options for the dual SIM version?
Click to expand...
Click to collapse
No.
Enviado desde mi LG-H870 mediante Tapatalk

reformatted in download mode with uppercut
I still don't understand why twrp detects my phone as an H872.
I can't flash lineageos because it fail the initial hardware check, also I guess twrp is not fully functional as I wasn't able to flash LG-H87010f-Flashable.COMPLETE.zip in the usual way

[GUIDE] Unbrick your Nokia 5

If your phone got stuck in 900E mode
-Hold Vol Up + Power for a few times to boot the phone to recovery mode
-Flash the ORIGINAL boot, system partitions and detele the data and cache partitions (choose flash image in TWRP for img files) (I used this yadi.sk/d/rcNFNnPp3MhtMe )
-Flash SuperSU in the recovery to patch the boot partition then reboot
If your phone got bootloop-ed
-Hold Vol Up + Power until the screen turns off then release
-Open OnlineUpdateTool (patched) and load your firmware in nb0 format
-Plug in your phone, it'll reboot to download mode
-Proceed to reflash the firmware
If your phone got stuck in 9008 mode
-Use @heineken78 's nb0 tools ( drive.google.com/file/d/0B3Wy4Ok3qGszaXhzM29YOEhrMW8 ) to extract the nb0 firmware
-Take the rawprogram, patch0 and firehose file with images in the rawprogram (search with the keyword filename) and put it inside a folder, rename according to the xml
-Load rawprogram, patch0 and firehose in QFIL, one by one to boot the phone
-You can use the firmware above for QFIL
Credits
@hikari_calyx for the method
@Quixote78 for OST and patch
These methods should also work on Nokia 2, 6, 7 (Although firmware isn't available for Nokia 7) and 8 in theory.
And, you can use EDL cable to force enter Qualcomm 9008, which doesn't work on Nokia 8. (Nokia 7 may not work either)
Click to expand...
Click to collapse

These methods should also work on Nokia 2, 6, 7 (Although firmware isn't available for Nokia 7) and 8 in theory.
And, you can use EDL cable to force enter Qualcomm 9008, which doesn't work on Nokia 8. (Nokia 7 may not work either)
Nokia 3? It has a MT6737M processor.

Hi, I'm now using Mac, where can I find the onlineUpdateTool? I have googled for quite some time.
Thanks
---------- Post added at 07:54 AM ---------- Previous post was at 07:46 AM ----------
Hi, I've found your onlineUpdateTool.zip, however, it requires password, could you please provide me? Tks

Hi, actually, my case is not bootlooped, it stucks on the recovery mode screen when I turn my phone on.
Please assist.

mrsilver256 said:
Hi, actually, my case is not bootlooped, it stucks on the recovery mode screen when I turn my phone on.
Please assist.
Click to expand...
Click to collapse
Password is 123
For stock recovery, power off the phone and plug in with OnlineUpdateTool open (rom loaded) and proceed to reflash
For TWRP, flash boot and system, delete data and cache then SuperSU root it

wolfyapl said:
Password is 123
For stock recovery, power off the phone and plug in with OnlineUpdateTool open (rom loaded) and proceed to reflash
For TWRP, flash boot and system, delete data and cache then SuperSU root it
Click to expand...
Click to collapse
Hi,
Is the stock rom is in here (nokia 5 included in name)
//mega.nz/#F!1ENgnThL!FyL9uYCC3Dq-16elThKAPg,
do I need to extract it to get nbo file?
Thank you

Hi,
I've run onlineUpdateTool.zip on windows 10 and it stops working all the time.

mrsilver256 said:
Hi,
I've run onlineUpdateTool.zip on windows 10 and it stops working all the time.
Click to expand...
Click to collapse
Have you installed it?

I don't really understand the thread
Help me. I don't think mine is bootloop because once it shows the Powered by android logo, after a few seconds it shut itself down. I've tried multiple methods like wipe data factory reset and installing OTA zips in the recovery mode but no luck at all. Is there any way to solve this problem?
I would really appreciate all the help.

mizuke said:
Help me. I don't think mine is bootloop because once it shows the Powered by android logo, after a few seconds it shut itself down. I've tried multiple methods like wipe data factory reset and installing OTA zips in the recovery mode but no luck at all. Is there any way to solve this problem?
I would really appreciate all the help.
Click to expand...
Click to collapse
If you use TWRP, reflash the ORIGINAL system.img and boot.img. Otherwise, reboot to bootloader

mrsilver256 said:
Hi,
I've run onlineUpdateTool.zip on windows 10 and it stops working all the time.
Click to expand...
Click to collapse
I'm running windows 7 and it's doing the same. :crying::crying:

mizuke said:
I'm running windows 7 and it's doing the same. :crying::crying:
Click to expand...
Click to collapse
Guys, install OST, patch it, and run from the installation folder after deleting config file

mrsilver256 said:
Hi,
I've run onlineUpdateTool.zip on windows 10 and it stops working all the time.
Click to expand...
Click to collapse
mizuke said:
I'm running windows 7 and it's doing the same. :crying::crying:
Click to expand...
Click to collapse
Try delete file: OnlineUpdateTool.exe.config in installation folder and start program again buddy.

thank you for this great post, i have nokia 5 ta-1024 and its dead, please provide me link of nokia ta-1024 firmware.

My nokia got bootlooped?Help please!!
I have powered android logo,(i was at twrp screen and i tried to set english theme i put file ui.zip to the sd card twrp/theme/ ticked first ZIP box at the first section and slided and then my phone nokia 5(TA-1053 ) rebooted and then i cant get to twrp again :\

Hi all, I have try to install this firmware ND1-3700-0-00WW-B03.nb0 on my Nokia 5 but when this phone restarts, I receive this message on Online Update Tool..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

roxy94 said:
Hi all, I have try to install this firmware ND1-3700-0-00WW-B03.nb0 on my Nokia 5 but when this phone restarts, I receive this message on Online Update Tool..
Click to expand...
Click to collapse
Same problem here...

SimGa said:
Same problem here...
Click to expand...
Click to collapse
Same on my ta1024 ...omg dead phone without system... what to do?
Is this tool error or wrong firmware / nbo file maybe? its like a adb error ...
Now im using my lumia 950 ...

dex87xda said:
Same on my ta1024 ...omg dead phone without system... what to do?
Is this tool error or wrong firmware / nbo file maybe? its like a adb error ...
Now im using my lumia 950 ...
Click to expand...
Click to collapse
You need to flash any security OTA for 7.1 and then you can flash any firmware with OST

Hi,
I need help. I tried to flash Android 8 and it only says No command and I can't enter into the OS
Any help?
Thanks

[GUIDE] Unbrick your device or recover from bootloop

Assalamu alaikum people,
Those on the telegram group know that I bugged you a lot about needing data partition. Because of my experience with unbricking and recovering the device, I can tell you a sureshot method that works to restore the device. Do not use this method if your device already works. There seems to be a lot of files inside the data partition which are necessary for the stock ROM to work. This method asks you to wipe data partition and so system update will not work. This should be a last resort. .
Many people seem to have come to the situation where they are in fastboot, and it says frp locked, so they cannot flash new twrp. And the system seems to be in bootloop and it does not work. What to do from there?
1. Download this file ->https://www.androidfilehost.com/?fid=673956719939832337.
2. In your SDCard, create a folder called TWRP and inside it, create a folder called BACKUPS (all in capitals). Inside this, create a folder called 7xtwrpbackup (small letters) and paste the contents of the zip that you have downloaded into this.
3. Boot to twrp in your device and go to restore. There you should see a folder 7xtwrpbackup. If you select it, you will get a checkbox below with recovery_ramdisk like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Select Yes and after restore complete, go back and select reboot and reboot to recovery.
5. Now, the new twrp will boot. In the new twrp, I want you to first go to wipe -> advanced wipe -> select dalvik/art cache, cache, data, internal storage and system.
6. Come back once again and select wipe, and this time, select format data. It will ask you to type yes. After that is done, come back once again.
7. Now select install and in that, install the openkirin RR image from telegram group or here -> https://forum.xda-developers.com/honor-view-10/development/rom-t3753555 (This step is optional because openkirin RR has a greater chance of booting than stock ROM. You can skip this step and directly boot stock)
8. Your system must boot now. If it boots, then all partitions are good. You can boot stock.
9. You can now can download stock from my post here and repeat from step 5-> https://forum.xda-developers.com/9-lite/development/stock-img-unlock-indian-version-t3767569
If this does not work, then look at the second method in the next post

Second method
If your first method does not work, then you can try this second method. Make sure you have enough data left in your internet connection (1.8 GB ish) before starting the process. Please note that this method will lock your bootloader, install stock recovery, flash the stock system and boot your phone. Of course, even if it relocks the bootloader, you can still unlock it using your code.
1. Download the zip
https://www.androidfilehost.com/?fid=746010030569970895
2. Extract it into sdcard directly (i.e. extract it to the root folder of your sdcard)
3. Make sure you have enough battery left (atleast 15%). Power off your phone. Now, press and hold vol up + Vol down + power buttons until the honor logo comes. Then, you can release all the keys. The system will go into emui recovery and restore your phone.
You will have stock phone at the end of the process.
Note:-If you still have bootloop at Honor logo, then power off the phone. Hold vol up + power button until the honor logo comes. It will boot into stock recovery. From there, you can do a factory reset and erase cache partition. Then the phone will definitely boot up.

Bricked my device Twrp doesn't work
Hello, I have bricked my honor 9 lite AL10(Indian Version). I have formatted my vender directory through Twrp by mistake now my device shows erecovery and reboots. Fastboot is working fine and FRP and Devices both shows unlocked means I can flash through fastboot. I don't want to lose my internal memory data.
Help me to unbrick my device !! :crying:

Oushal kDee said:
Hello, I have bricked my honor 9 lite AL10(Indian Version). I have formatted my vender directory through Twrp by mistake now my device shows erecovery and reboots. Fastboot is working fine and FRP and Devices both shows unlocked means I can flash through fastboot. I don't want to lose my internal memory data.
Help me to unbrick my device !! :crying:
Click to expand...
Click to collapse
Download vendor partition from here https://forum.xda-developers.com/9-lite/development/stock-img-unlock-indian-version-t3767569

Hello i am siddharth, i have relocked my oem by fastboot oem relock -------- after that yes/no option came i click on yes. It starts factory formatting after completion of formatting when the phone starts its showing your device has failed verification and got stuck in it. When i press reboot option it will directly comes to erecovery mode wher the option came to download new recovery when i connect my phone with wifi it starts searching for some time after that system update failed.
When i starts mobile directly to fastboot mode by pressing volume down button and power button the white screen with android comes appear i.e fastboot mode screen. In that screen in green colour i found that
Phone Relock
FRP lock
When ever i m trying to find the device in fastboot mode by typing fastboot devices my device showing there but no other command is working such as fastboot oem unlock -------, fastboot flash system system.img, all the time it comes Failed.
I have downloaded many UPDATE.APP and tried to load that by dload method but every time after 5% it come Failed to install.
I have downloaded UPDATE.APP form ur given link also. This is only the image in which my phone comes upto 23% install after dat failed.
Nothing working for me. Kindly help me.
Mail me if there is any solution @
[email protected]

i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help

None of the method worked for me my device still bootloops no matter what system.img or rom zip file i flash. The emui recovery method didn't work for me as it loaded up to 5% and then failed instantly. Please help me unbrick my 9 lite bro. Could you provide me the boot.img? i think my phone got bricked because i tried to i install magisk on treble rom (i guess?). But anyway PLEASE HELP ME (

Try extracting kernel.img from an update and flash that. It fixed it for me.

hi twrp is bootlooping as well
cant access
---------- Post added at 07:15 PM ---------- Previous post was at 06:52 PM ----------
hey i used the twrp from the link made a backup restored it now a get bootloop cant get into twrp it goes in ti it then it fcs then am back to bootloader unlocked warning

hi anyone got custom.img and userdata.img from this LLDL31C432B130 800130 a need to restore my device

Same Problem
[email protected] said:
i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help
Click to expand...
Click to collapse
Even I'm facing the same problem, if anyone has solution plz help.
---------- Post added at 10:15 AM ---------- Previous post was at 10:10 AM ----------
[email protected] said:
i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help
Click to expand...
Click to collapse
Even I'm facing the same problem.

mine goes to 5% doesnt do anything and then it fails

aveemashfaq said:
If your first method does not work, then you can try this second method. Make sure you have enough data left in your internet connection (1.8 GB ish) before starting the process. Please note that this method will lock your bootloader, install stock recovery, flash the stock system and boot your phone. Of course, even if it relocks the bootloader, you can still unlock it using your code.
1. Download the zip
https://www.androidfilehost.com/?fid=746010030569970895
2. Extract it into sdcard directly (i.e. extract it to the root folder of your sdcard)
3. Make sure you have enough battery left (atleast 15%). Power off your phone. Now, press and hold vol up + Vol down + power buttons until the honor logo comes. Then, you can release all the keys. The system will go into emui recovery and restore your phone.
You will have stock phone at the end of the process.
Note:-If you still have bootloop at Honor logo, then power off the phone. Hold vol up + power button until the honor logo comes. It will boot into stock recovery. From there, you can do a factory reset and erase cache partition. Then the phone will definitely boot up.
Click to expand...
Click to collapse
But this is for L31
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
My phone's frp and bootloader locked,and phone is booting to erecovery,what to do

need help with LLD-AL10C675 indian version
I have flashed a cutom treble rom phh-treble to be specific,used it for couple of days and then tried instaling the magisk from magiskmanager and after its done when i reboot it shows error mode with message Func no:10(boot img ) and func no:2 , i can boot into fastboot mode both frp and phone unlocked ,can some please help me to get back my phone into a usable condition thank you

sunny_deed said:
I have flashed a cutom treble rom phh-treble to be specific,used it for couple of days and then tried instaling the magisk from magiskmanager and after its done when i reboot it shows error mode with message Func no:10(boot img ) and func no:2 , i can boot into fastboot mode both frp and phone unlocked ,can some please help me to get back my phone into a usable condition thank you
Click to expand...
Click to collapse
To help you a full firmware is required and that's not available for (India c675) yet!
Before any modification to system you should have a full firmware in hand.

BS4388 said:
To help you a full firmware is required and that's not available for (India c675) yet!
Before any modification to system you should have a full firmware in hand.
Click to expand...
Click to collapse
yea that was a pretty big mistake i made without looking for it, i have been told by someone that we can pull out all the require d imgs from a phone in good working condition, i asked in the hopes that someone would be generous enough to do that for me , thank you ,and also does anyone have any idea about when the full firmware will be released

sunny_deed said:
yea that was a pretty big mistake i made without looking for it, i have been told by someone that we can pull out all the require d imgs from a phone in good working condition, i asked in the hopes that someone would be generous enough to do that for me , thank you ,and also does anyone have any idea about when the full firmware will be released
Click to expand...
Click to collapse
What's wrong with the version (675) from here :-
https://www.mobileheadlines.net/download-huawei-honor-9-lite-firmware-files/

Sparkrite said:
What's wrong with the version (675) from here :-
https://www.mobileheadlines.net/download-huawei-honor-9-lite-firmware-files/
Click to expand...
Click to collapse
there is no Fullota version in there

sunny_deed said:
there is no Fullota version in there
Click to expand...
Click to collapse
Go:
https://forum.xda-developers.com/9-lite/development/stock-rom-indian-firmware-c675-t3813875

sunny_deed said:
there is no Fullota version in there
Click to expand...
Click to collapse
My bad, I was only trying to help.............
Anyway you have it now (post above) thanks to @BS4388 and @VigneshS007 .