Database Develop

Updating ROM after Unlock, Root and TWRP applied

Hi, I am preparing for updating my L09 rom to newer version - B182 and I got some uncertainty regarding the following matters - what are the steps to take before attempting the update with /dload folder method
1. I have unlocked phone. Do I need to relock it back to stock?
2. I have TWRP recovery. Do I need to revert to stock?
3. I have root. Do I need to unroot?
4. Would these steps wipe my storage?
5. After update rooting back would wipe the phone - is that correct?
I tried to find answers in other threads, I found answers not clear and I will be grateful if someone could explain the correct procedure to me.
Thanks in advance!

Hi, after couple of hours of reading through different threads I got to the point I decided to update the rom, which finished successfully.
I took the following steps:
1. I unrooted the rom with SuperSU unroot option (choosing “no” when asked about replacing boot image). Than the phone restarted.
2. I created “dload” folder on my external SD card and placed update.app file containing latest rom there.
3. I restarted my P9 holding Volume up and Power buttons simultaneously. The system begun to update – finishing after two-three minutes with restart of my phone.
4. The system was updated without wiping anything – so settings, passwords etc. were preserved.
5. After the update, my bootloader was replaced with stock and was locked. And I got no root anymore.
As I am happy with the result I wanted to share this experience with others who as me are searching for the simple answers for these very basic questions.
Cheers!

piotrkalb said:
Hi, after couple of hours of reading through different threads I got to the point I decided to update the rom, which finished successfully.
I took the following steps:
1. I unrooted the rom with SuperSU unroot option (choosing “no” when asked about replacing boot image). Than the phone restarted.
2. I created “dload” folder on my external SD card and placed update.app file containing latest rom there.
3. I restarted my P9 holding Volume up and Power buttons simultaneously. The system begun to update – finishing after two-three minutes with restart of my phone.
4. The system was updated without wiping anything – so settings, passwords etc. were preserved.
5. After the update, my bootloader was replaced with stock and was locked. And I got no root anymore.
As I am happy with the result I wanted to share this experience with others who as me are searching for the simple answers for these very basic questions.
Cheers!
Click to expand...
Click to collapse
I want to do the same, go to full stock. I already have B182 version and want to try the public beta.
Did you flash the stock recovery?
the steps are:
1-unroot(i will do with the toolkit). dont need the stock recovery?
2-put the dload folder in sdcard and flash

Nu9, I am afraid I don't know the exact answer... I suggest you to post your query on one of Nougat beta threads. I think you shall find there the answers.

piotrkalb said:
3. I restarted my P9 holding Volume up and Power buttons simultaneously. The system begun to update – finishing after two-three minutes with restart of my phone.
Cheers!
Click to expand...
Click to collapse
So you updated the device even when you have TWRP? strange.

I used the same method when I debranded my device. After flashing twrp and oeminfo files, I simply created the dload folder and manually flashed B136 release, and immediately after that B182 release. Worked perfectly.

DallasCZ said:
So you updated the device even when you have TWRP? strange.
Click to expand...
Click to collapse
Yes - correct. I guess it works only if you got full rom image in "update.app" file. Mine B182 was something about size of 2 gigs.

piotrkalb said:
Yes - correct. I guess it works only if you got full rom image in "update.app" file. Mine B182 was something about size of 2 gigs.
Click to expand...
Click to collapse
I have one b182 with 1.5G size, is the same?
Enviado do meu EVA-L09 através de Tapatalk

Nu9 said:
I have one b182 with 1.5G size, is the same?
Enviado do meu EVA-L09 através de Tapatalk
Click to expand...
Click to collapse
I used this one - published by Fauert
http://forum.xda-developers.com/showpost.php?p=69203933&postcount=914
https://drive.google.com/file/d/0B4b...w?usp=drivesdk
size = 2,8 gb
Hope this helps.

piotrkalb said:
I used this one - published by Fauert
http://forum.xda-developers.com/showpost.php?p=69203933&postcount=914
https://drive.google.com/file/d/0B4b...w?usp=drivesdk
size = 2,8 gb
Hope this helps.
Click to expand...
Click to collapse
This one comes with themes? Last rom flashed don't have themes instaled
Enviado do meu EVA-L09 através de Tapatalk

Nu9 said:
This one comes with themes? Last rom flashed don't have themes instaled
Enviado do meu EVA-L09 através de Tapatalk
Click to expand...
Click to collapse
I just checked - my themes are there and are working. I dont use them , so for me its not a deal-breaker

Relock bootloader

Hello everyone. I am new at this site and i want your help to relock the bootloader of my p8 lite ALE-21.
I took the unlocking number from huawei site, i locked it but now i want to relock it because sometimes in apps like facebook it's a little bit slower (not much). Can not install any update package.
I tries to relock it by using this command " fastboot oem lock " or "fastboot oem relock" but i get the same message that is saying that is FAILED. So if anyone know what can i do to relock it just reply to thread.

ArgisL said:
Hello everyone. I am new at this site and i want your help to relock the bootloader of my p8 lite ALE-21.
I took the unlocking number from huawei site, i locked it but now i want to relock it because sometimes in apps like facebook it's a little bit slower (not much). Can not install any update package.
I tries to relock it by using this command " fastboot oem lock " or "fastboot oem relock" but i get the same message that is saying that is FAILED. So if anyone know what can i do to relock it just reply to thread.
Click to expand...
Click to collapse
I don't think bootloader is causing your phone to slow down also you can still update your by sdcard.
.
For relocking I think you need to type that code too. The code which was used to unlock the phone.

Suleiman01 said:
I don't think bootloader is causing your phone to slow down also you can still update your by sdcard.
.
For relocking I think you need to type that code too. The code which was used to unlock the phone.
Click to expand...
Click to collapse
I tried to update the device from the update package from software update of the device and also i am getting an installing error because the bootloader is unlocked. Please tell me how can i update it from the sdcard.
When i tried to relock it i used the same code that i used to unlock it.

ArgisL said:
I tried to update the device from the update package from software update of the device and also i am getting an installing error because the bootloader is unlocked. Please tell me how can i update it from the sdcard.
When i tried to relock it i used the same code that i used to unlock it.
Click to expand...
Click to collapse
It's easy. Download the firmware from Huawei's official website. There will be a pdf file and dload folder. The instructions to update the phone is in that pdf file (with pictures).

Suleiman01 said:
It's easy. Download the firmware from Huawei's official website. There will be a pdf file and dload folder. The instructions to update the phone is in that pdf file (with pictures).
Click to expand...
Click to collapse
I will try it..
Any suggestions to rlock the bootloader ?

ArgisL said:
I will try it..
Any suggestions to rlock the bootloader ?
Click to expand...
Click to collapse
Try typing fastboot oem relock (without code).
By the way it isn't worth relocking your phone. It won't just boost your device.

Suleiman01 said:
Try typing fastboot oem relock (without code).
By the way it isn't worth relocking your phone. It won't just boost your device.
Click to expand...
Click to collapse
I know that but i think it is better to get any factory settings ..
Thank you for your help..
I'll try to update it and if there is something else i am gonna tell you

Hi!
bootloader unlocked don´t have anything to do with rom performance!
Unlocked only allows to change rom images.
New updates came with better performance, like B600 ( dual sim ) or B601 ( single sim ).
To flash a Huawei ROM you need to have a Huawei recovery, not TWRP.
How to do a force update.
Use PC, download the rom, extract the update.app file from rom.
Create a folder in sd card with name dload.
Copy the update.app file to inside dload folder.
Turn OFF the phone.
Press vol +, vol - and power at same time and wait to installing finish it!
I let you here the default Huawei recovery. -> recovery.img
.

persona78 said:
Hi!
bootloader unlocked don´t have anything to do with rom performance!
Unlocked only allows to change rom images.
New updates came with better performance, like B600 ( dual sim ) or B601 ( single sim ).
To flash a Huawei ROM you need to have a Huawei recovery, not TWRP.
How to do a force update.
Use PC, download the rom, extract the update.app file from rom.
Create a folder in sd card with name dload.
Copy the update.app file to inside dload folder.
Turn OFF the phone.
Press vol +, vol - and power at same time and wait to installing finish it!
I let you here the default Huawei recovery. -> recovery.img
.
Click to expand...
Click to collapse
I tried to do that without sdcard. I just created the dload folder and i pasted the update.app file . I did that with the volume and the power keys but nothing happened. The sd card is neccassery?

ArgisL said:
I tried to do that without sdcard. I just created the dload folder and i pasted the update.app file . I did that with the volume and the power keys but nothing happened. The sd card is neccassery?
Click to expand...
Click to collapse
Hmmm!?
I think not...
dload was with out caps, right?
.

persona78 said:
Hmmm!?
I think not...
dload was with out caps, right?
.
Click to expand...
Click to collapse
"dload" just like i write it

persona78 said:
Hmmm!?
I think not...
dload was with out caps, right?
.
Click to expand...
Click to collapse
I am asking that because i patsed on the storage of the phone

ArgisL said:
I am asking that because i patsed on the storage of the phone
Click to expand...
Click to collapse
No. It doesn't matter. dload folder should be in root directory either in sdcard or internal storage.

Suleiman01 said:
No. It doesn't matter. dload folder should be in root directory either in sdcard or internal storage.
Click to expand...
Click to collapse
I am getting installatjiin error with both ways

ArgisL said:
I am getting installatjiin error with both ways
Click to expand...
Click to collapse
You can't just upgrade to latest version, it has to be done in steps...
My P8 Lite was on LP Build 130 (single sim), I had to upgrade it to B133 first then B170, before being able to upgrade to MM.
What version is your phone running?
p.s. you *do* require an SD Card to perform manual upgrades...
This is an excerpt from the B170 upgrade documentation
Version introduction
The following versions can be upgraded.
Versions can be upgraded ALE-L21C432B160 ALE-L21C432B150 ALE-L21C432B136 ALE-L21C432B134 ALE-L21C432B132 Upgrade package
Upgrade package Info
Main package Software\dload\UPDATE.APP Vendor package Test\TestSoftware\vendor\UPDATE.APP Upgrade tools Micro SD card Upgrade environment requirements
Check current upgrade environment
To make sure that the Micro SD card is available and can be read and write.
Notes: A Micro SD card of 4GB or more should be available. It is recommended that The Micro SD card is made by Sandisk, Kingstone, or Kingmax.
To make sure that the power of the battery is enough to run the upgrade process. It is recommended that the power of the battery is more than 40%.
Upgrade operations will erase all user data. So if there are some important information, you should backup them before upgrade.
To make sure the model of LCD is not BOE_NT35521S or your phone will be black after upgrading. Method: enter:*#*#2846579#*#* -> Veneer Informations ->Apparatus Info -> LCD Model
Click to expand...
Click to collapse

acolwill said:
You can't just upgrade to latest version, it has to be done in steps...
My P8 Lite was on LP Build 130 (single sim), I had to upgrade it to B133 first then B170, before being able to upgrade to MM.
What version is your phone running?
p.s. you *do* require an SD Card to perform manual upgrades...
This is an excerpt from the B170 upgrade documentation
Click to expand...
Click to collapse
That is the version i am running now.
It is a custom rom based on official

ArgisL said:
That is the version i am running now.
It is a custom rom based on official
Click to expand...
Click to collapse
To be perfectly honest, when I updated from LP to MM I noticed the phone was considerably slower... Try using the phone tools to limit apps running at start-up and/or do a full wipe.
One thing I did find useful on my LG G4 after several phone flashes was to do an SD trim (fstrim on Google play), this forces the phone to wipe and free up the partially written nand blocks

acolwill said:
To be perfectly honest, when I updated from LP to MM I noticed the phone was considerably slower... Try using the phone tools to limit apps running at start-up and/or do a full wipe.
One thing I did find useful on my LG G4 after several phone flashes was to do an SD trim (fstrim on Google play), this forces the phone to wipe and free up the partially written nand blocks
Click to expand...
Click to collapse
I'll try everything tthat you said to me and i will reply for any trouble

Wrong build number - How to reflash ?

Hi !
I have a NEM-L51C432. I recently installed the new update available (B357) using Huawei Firmware Finder.
Due to some issues, I then decided to rollback to a previous build using the dload method. I succeeded, although I can't recall if the one which worked was B350 or B355.
The problem is, my build is still B357 in the "About phone" menu even though I have the March security patch.
I also noticed that the clock app is missing. Moreover, I get a notification telling me that apps are non-compatible with my phone when I install/update them, even though they work fine.
I can't update system apps (like Chrome or WebView for instance) due to different signature.
I have no idea if these things are related.
So, can someone please tell me how can I get my phone to display the correct build number and eventually correct the other issues in the process ? I'm ready to wipe and re-flash if I have to.
Side question, when I download from HFF in order to use the dload method, most of the time I have the choice between one, two, or even three zips to download.
Each contain a UPDATE.APP file, but I don't get the same files when I extract from it, depending on the zip I downloaded.
Can someone explain me this as well as which file I should prefer (update.zip or one of the other two if available) ?
Thank you.

You need to flash all 3 files via dload.
There is a detailed quide in my signature for dload method. You can flash b350/355/357 or above using that.

shashank1320 said:
You need to flash all 3 files via dload.
There is a detailed quide in my signature for dload method. You can flash b350/355/357 or above using that.
Click to expand...
Click to collapse
Thank you for your answer.
Do you mean I need the three zips from HFF ? For instance, if I try to download B355, I have the choice between these :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v84990/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...90/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...l/NEM-L51_hw_eu/update_full_NEM-L51_hw_eu.zip
They all have a UPDATE.APP within them, but they don't have the same files when I extract. What should I do ?

Zarou said:
Thank you for your answer.
Do you mean I need the three zips from HFF ? For instance, if I try to download B355, I have the choice between these :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v84990/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...l/NEM-L51_hw_eu/update_full_NEM-L51_hw_eu.zip
They all have a UPDATE.APP within them, but they don't have the same files when I extract. What should I do ?
Click to expand...
Click to collapse
Let me check the files on PC. Will guide you further

shashank1320 said:
Let me check the files on PC. Will guide you further
Click to expand...
Click to collapse
Okay, thanks.
Today I tried re-flashing the update.zip file of all versions via dload, even MM versions. In the end, the only one which worked was the FullOTA-MF-PV of NEM-L51C432B350. All other versions failed to install at 5 %.
I don't know if this is related, but this is the only update which is available as "PV", whatever that means.
In any case, as I said in my first post, my build number is still B357 (while it should be 350) and I don't have the Huawei clock app. Some system apps are impossible to update as well. Plus, this will probably cause issue with future updates...

Zarou said:
Okay, thanks.
Today I tried re-flashing the update.zip file of all versions via dload, even MM versions. In the end, the only one which worked was the FullOTA-MF-PV of NEM-L51C432B350. All other versions failed to install at 5 %.
I don't know if this is related, but this is the only update which is available as "PV", whatever that means.
In any case, as I said in my first post, my build number is still B357 (while it should be 350) and I don't have the Huawei clock app. Some system apps are impossible to update as well. Plus, this will probably cause issue with future updates...
Click to expand...
Click to collapse
Pv is something you can flash via twrp. Regarding misssing apps, flash the smaller file, around 600-800 MB, via twrp and it will restore apps, themes, fm radio etc.

shashank1320 said:
Pv is something you can flash via twrp. Regarding misssing apps, flash the smaller file, around 600-800 MB, via twrp and it will restore apps, themes, fm radio etc.
Click to expand...
Click to collapse
Can't flash the update.zip with TWRP (at least, with OldDroid's). However, I did managed to get back missing apps by flashing the second zip file, thank you about that.
Doesn't work with the third one though, and my build number is still wrong. Any idea about how to fix this ?

Zarou said:
Can't flash the update.zip with TWRP (at least, with OldDroid's). However, I did managed to get back missing apps by flashing the second zip file, thank you about that.
Doesn't work with the third one though, and my build number is still wrong. Any idea about how to fix this ?
Click to expand...
Click to collapse
Which build number you flash and which is the one showing?
yes, only 2nd file will work and bring back the missing apps.

shashank1320 said:
Which build number you flash and which is the one showing?
yes, only 2nd file will work and bring back the missing apps.
Click to expand...
Click to collapse
In the end, I solved the issue by extracting the VERSION.img file from the UPDATE.APP of the third zip and flashing it with TWRP.
I then updated to B355 and B357 with HFF proxy.
Weird thing is, the B357 update re-locked my bootloader and when I unlocked it again, I was stuck with an old version of Google Play Services which couldn't be updated (different signature issue). Luckily, I had a backup from the previous update but this is weird.
Thanks for your help. You've done a lot.

[GUIDE][ROOT] how to root your P9 LITE MINI

I did not find a subforum dedicated to P9 lite mini version so I will post this guide here , as I know that many users that have this phone wish to have it rooted but don't know how.
I apologise to mods in advance if this is wrong place to post this.
Before I start, I will tell you that I am not a programmer and that I just followed a guide to the letter that @txmt5 told me about. So all credits go to him.
Lets start:
0. Make sure that your phone has USB DEBUGGING enabled.
1. a) You will need unlocked bootloader. There is simple official solution to get unlock code by huawei. Just go to their website , UNLOCK tab and follow instructions.
b) Once you get unlock code just use this simple tool by @Mandrigan. BE WARNED : use only unlock bootloader option as other options may brick your phone.
There is also an option to use cmd but I found this one easier to follow and it worked anyway.
Once you unlock your bootloader your phone will give you a warning about it before every boot. This is normal for every device just that some keep silent about it
2. Just install magisk app by @topjohnwu from here. As you do not have costum recovery (as far as I know it is still not developed for our device) you will not be able to root it as usual but it will require additional steps.
3. Get an original unpatched version for your frimware from here. It is really important that you find a right one. It will use the same code that is written in your "update info" in settings so it is easy to find.
4. From the update.zip file you hopefully downloaded in step before you will need to extract BOOT.img file.
To do this use huawei update extractor app by @worstenbrood. I personally use version 0.9.9.5 and extracted only BOOT.img .
It may look like it hangs on full green bar once you extract it. If it hangs for more than 5 minutes it is safe to cancel it and take the BOOT.img file it created. This happened to me and it worked anyways.
5. Put the BOOT.img file from previous step on your device and use magisk on it. It will create patched_boot.img that you will transfer back to your PC
6. Download adb fastboot tools (put patched_boot.img from previous step inside that folder) and HiSuite (just for huawei drivers)
7. Connect your phone to your PC and go to fastboot tools folder (from previous step) and shift+right click anywhere in that folder and take open CMD window here option.
The commands are as follows :
Code:
adb reboot bootloader
after it reboots input
Code:
adb fastboot flash boot patched_boot.img
Your device should be rooted now
You will have root permission but you will not be able to use any other fancy magisk repo app as you do not have TWRP or other custom recovery. And there is really high chance that you will have to repeat this whole thing after every update (it is just my guess) .
I really hope that this guide will help someone
P.S. I wish to thank all people that I tagged and let them know that it was not my wish to spam them but to give them proper credit.

batman1950 said:
5. Put the BOOT.img file from previous step on your device and use magisk on it. It will create patched_boot.img that you will transfer back to your PC
Click to expand...
Click to collapse
Hi, I'm grateful for your contribution to this community. Users who come through here will appreciate.
Can you talk to me about step 5?

breathislava said:
Hi, I'm grateful for your contribution to this community. Users who come through here will appreciate.
Can you talk to me about step 5?
Click to expand...
Click to collapse
I am really glad that you find my guide helpful.
When you go to magisk->install you will need to patch boot file.
Since wedo not have custom recovery you need to provide a path (impossible)
to BOOT.img file so magisk can patch it.
So you just put boot.img you downloaded to phome or sd card and provide path to it

batman1950 said:
I am really glad that you find my guide helpful.
When you go to magisk->install you will need to patch boot file.
Since wedo not have custom recovery you need to provide a path (impossible)
to BOOT.img file so magisk can patch it.
So you just put boot.img you downloaded to phome or sd card and provide path to it
Click to expand...
Click to collapse
I don't understand!
I don't find any "Install" option. Since TWRP is not available for this device, how to proceed?
Can you give me more details?
Until now, I flashed a "ready to be flashed" pre-rooted kernel and I owned SuperUser rights.
Now I want to patch a self-made one. How can I do?

breathislava said:
I don't understand!
I don't find any "Install" option. Since TWRP is not available for this device, how to proceed?
Can you give me more details?
Until now, I flashed a "ready to be flashed" pre-rooted kernel and I owned SuperUser rights.
Now I want to patch a self-made one. How can I do?
Click to expand...
Click to collapse
on newest magisk ver. press install (huge bottun next to magisk icon)-->install--> patch boot image

batman1950 said:
on newest magisk ver. press install (huge bottun next to magisk icon)-->install--> patch boot image
Click to expand...
Click to collapse
I don't find it!
Can you post a screenshot?

breathislava said:
I don't find it!
Can you post a screenshot?
Click to expand...
Click to collapse
for some reason I can't post screenshots -.- I will do it as soon as I get to my laptop

batman1950 said:
for some reason I can't post screenshots -.- I will do it as soon as I get to my laptop
Click to expand...
Click to collapse
Ok, in the meantime, can you explain the whole step 5?

breathislava said:
Ok, in the meantime, can you explain the whole step 5?
Click to expand...
Click to collapse
You just need to put BOOT.img file from step 4. anywhere on your device and use magisk on it.
really don't know how to tell it differently

batman1950 said:
You just need to put BOOT.img file from step 4. anywhere on your device and use magisk on it.
really don't know how to tell it differently
Click to expand...
Click to collapse
What a dumb I am! I forgot to say you that the phone is offline. To understand better my issue, you can read here.
I never thought internet connection was necessary. For now, I have neither a data plan nor a wi-fi internet connection. Is there a way to solve?
Thanks for your patience

breathislava said:
What a dumb I am! I forgot to say you that the phone is offline. To understand better my issue, you can read here.
I never thought internet connection was necessary. For now, I have neither a data plan nor a wi-fi internet connection. Is there a way to solve?
Thanks for your patience
Click to expand...
Click to collapse
I really don't know :/

batman1950 said:
I really don't know :/
Click to expand...
Click to collapse
OK! Thanks!

TWRP available soon
breathislava said:
I don't understand!
I don't find any "Install" option. Since TWRP is not available for this device, how to proceed?
Can you give me more details?
Until now, I flashed a "ready to be flashed" pre-rooted kernel and I owned SuperUser rights.
Now I want to patch a self-made one. How can I do?
Click to expand...
Click to collapse
I'm currently working on a TWRP port for this device. I have only a single problem with data partition.

ioanvlad67 said:
I'm currently working on a TWRP port for this device. I have only a single problem with data partition.
Click to expand...
Click to collapse
Is there any progress )

It doesn't flash it

Vaios1231 said:
It doesn't flash it
Click to expand...
Click to collapse
what step you have a problem with? And are all other steps completed ?

batman1950 said:
what step you have a problem with? And are all other steps completed ?
Click to expand...
Click to collapse
I got it now. All you have to do is not type adb fastboot and just type fastboot flash...
Also another problem that I'm having with rooting another p9 lite mini is that I can't get the bootloader unlock code from huawei anymore. Any solutions? Huawei seems to not want to give you the code anymore.

Vaios1231 said:
I got it now. All you have to do is not type adb fastboot and just type fastboot flash...
Also another problem that I'm having with rooting another p9 lite mini is that I can't get the bootloader unlock code from huawei anymore. Any solutions? Huawei seems to not want to give you the code anymore.
Click to expand...
Click to collapse
I had to type adb as I was on CMD...you were on powershell?
I think they MUST give it to you as it is your phone after all

batman1950 said:
I had to type adb as I was on CMD...you were on powershell?
I think they MUST give it to you as it is your phone after all
Click to expand...
Click to collapse
I was on cmd. Also i have e-mailed Huawei support to give it to me. Do you get the unlock code option on their site? I swear 4 days ago i got it and now it is gone... If you would like, you could add me on discord or such to tell you more details.

Vaios1231 said:
I was on cmd. Also i have e-mailed Huawei support to give it to me. Do you get the unlock code option on their site? I swear 4 days ago i got it and now it is gone... If you would like, you could add me on discord or such to tell you more details.
Click to expand...
Click to collapse
It must be on their site. I will check tonight when I get home

Bootloop on pra_lx1 p8 lite 2017 oreo twrp and hurupdater issue

Hello everyone.
Last night i am tried to update my EMUI 5.0.2 Pra-lx1 p8 lite 2017 phone to the Oreo update 8.0.0.322 downloaded from Team TMs' huawei firmware finder.
My phone is allready "Bootloader unlocked" and "FRP unlocked" there is no problem. I can reach to TWRP( there is a huge problem i will explain it).
on the top of my way i got EMUI 5.0.2 and i unlocked the bootloader and FRP.
then i installed the EliteTWRP-3.2.1.
after this i downloaded
HuRUpdater 0_3.zip
and the 3 neccesery FullOTA-MV-OP files that includes the
update.zip
update_data_full_public.zip
update_full_PRA-L11_hw_eu.zip
then i do everything exatly on this thread
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
and voilla!!! i got the Oreo update installed.
BUT....
i dont get the file manager app its lost!
i can not get themes or get in any of huawei apps sign in or get in!
so for this. my next step is goint to do reflash the oreo how i did it again.
BUT....
i can not do this because the instaled TWRP does NOT support OREO. Applause for this
so i'am tried 3 different TWRP that can be used on HUAWEI phones.
First one is this i dont know who is the developer but ists intercafe is chinese or korean.
https://drive.google.com/file/d/1rlQPRP234PoXY_yqup3oK_joOZGSIker/view
i tried to instal this over adb fastboot. BUT I can NOT. Because Oreo will do this on RAMDISK_RECOVERY!!!! WOOOWWWW
i did this and i reinstaled the oreo update like i did it first but in this new TWRP.
İt flashed my OREO but on the bootlogo the HUAWEI opening sound curropted before finished the sound and gets to restart.
after restart eRecovery opens and give me TWO funcional choises!!! Like Jig SAW
anyway...
the first option is DOWNLOAD LATEST VERSION AND RECOVERY
BUT for my chanse!!!! or mean bad LUCK!!! eRecovery WiFi doesnt see the EDUROAMs ACCESS POINTS WELL RIGHT!!!!
so i passed the first one and we are on the MAGICAL point.
the second option is the WIPE DATA/FACTORY RESET
on this time i CAN NOT DO THIS BECAUSE THE ORGININAL RECOVERY PART IS GONE!!!! YEAP I CAN NOT DO FACTORY RESET.
WHEN i choose this option it will go to the TWRP recovery nice huh!? NO.
so what will i do i know my phone is not BRICKED YET! İF THERE İS TWRP THERE İS HOPE!
BUT I DO NOT KNOW WHAT SHOULD I DO RIGHT KNOW
please help me....

with this Recovery (TWRP)( not usefull beacuse you can not use them )
https://forum.xda-developers.com/p8lite/p8-lite-2017-development/recovery-recoveryoreonocheck-install-t3777974
i found this under a members signature and i give a try but it wont work this gives me just a big error
But this error gets my phone a factory reset after than i flashed this Recovery (better then the chinesee korean languges type one ;D )
https://forum.xda-developers.com/p8lite/p8-lite-2017-development/unofficial-twrp-3-2-1-0-oreo-t3773970
and i tried to flash the Oreo update again with HuRUpdater_0_3.zip
but now I am at the begining. System works there is no issue over hardware.
But there is missing system apps like File Manager. Themes and so on....
And the best thing is The BUILD NUMBER is 8.0.0.046(08TO)
BUT I flashed the f*ckn' 8.0.0.322!!!!! WHY GOD!!!! WHY!!!!
Could anybody iluminte about what the hell is going on right now please i need to know why is why

Dude you need to rename the files before you put them in the folder
HuRUpdater 0_3.zip --> just delete the number (HuRUpdater.zip)
update_data_full_public.zip --> update_data_public.zip
update_full_PRA-L11_hw_eu.zip --> update_all_hw.zip

marstonpear said:
Dude you need to rename the files before you put them in the folder
HuRUpdater 0_3.zip --> just delete the number (HuRUpdater.zip)
update_data_full_public.zip --> update_data_public.zip
update_full_PRA-L11_hw_eu.zip --> update_all_hw.zip
Click to expand...
Click to collapse
thanks for your response. but i mention it i did it everything right. i do not think that only delete 3 piece of character get back the File manager or themes or huawei applications .

z1rqdym said:
thanks for your response. but i mention it i did it everything right. i do not think that only delete 3 piece of character get back the File manager or themes or huawei applications .
Click to expand...
Click to collapse
It would, main issue is that HuRUpdater is made for many Huawei phones not just for prague, when you flash the HuRUpdater.zip it can only flash the update.zip because you don't need to rename it. It doesn't flash the other zips because they're not named correctly, hence the updater can't find the zips to flash.

marstonpear said:
It would, main issue is that HuRUpdater is made for many Huawei phones not just for prague, when you flash the HuRUpdater.zip it can only flash the update.zip because you don't need to rename it. It doesn't flash the other zips because they're not named correctly, hence the updater can't find the zips to flash.
Click to expand...
Click to collapse
there is a misunderstood i allready rename the 3 update files. i used two times the nocheck recovery method and works well but the issue is the same. i only dont rename the hurupdater file. i will give a try now.

Let me know if it works, if that doesn't work for you too I can't help you but I just uploaded the stock oreo erecovery to GDrive and you can download it and flash it to recovery_ramdisk partition (because you are on Oreo) then make a factory reset or go back to nougat https://drive.google.com/open?id=157C0CI5CqSEzvQRB7Yt5K1WPtYBcaO08
EDIT: I didn't read it right sorry that you can't connect to wifi. Try wiping data-cache-dalvik-system on TWRP and then flashing the HuRUpdater.zip
You may also have a bad download, I mean one of the zip files you have may be corrupted

marstonpear said:
Let me know if it works, if that doesn't work for you too I can't help you but I just uploaded the stock oreo erecovery to GDrive and you can download it and flash it to recovery_ramdisk partition (because you are on Oreo) then make a factory reset or go back to nougat https://drive.google.com/open?id=157C0CI5CqSEzvQRB7Yt5K1WPtYBcaO08
EDIT: I didn't read it right sorry that you can't connect to wifi. Try wiping data-cache-dalvik-system on TWRP and then flashing the HuRUpdater.zip
You may also have a bad download, I mean one of the zip files you have may be corrupted
Click to expand...
Click to collapse
same result i did it just you are said. it flashed oreo and it booted and works. But there is no File manager can not use themes. Build number is 8.0.0.046(08TO). I can make call connect to internet over LTE / 3G / EDGE.
is this issue are from that my phone is from another region instead from europe? İ downloaded the PRA-LX1C432B322-(8.0.0.322) from Team MT FirmwareFinder over Huawei host servers three times. even i download the stock nougat rom in the same way. I flashed the nougat but this time build number is NRD-testkeys . same issue file manager themes not appear or work.

z1rqdym said:
same result i did it just you are said. it flashed oreo and it booted and works. But there is no File manager can not use themes. Build number is 8.0.0.046(08TO). I can make call connect to internet over LTE / 3G / EDGE.
is this issue are from that my phone is from another region instead from europe? İ downloaded the PRA-LX1C432B322-(8.0.0.322) from Team MT FirmwareFinder over Huawei host servers three times. even i download the stock nougat rom in the same way. I flashed the nougat but this time build number is NRD-testkeys . same issue file manager themes not appear or work.
Click to expand...
Click to collapse
If you get that build number issue on nougat it might be about your oeminfo partition. Try flashing PRA-LX1C432 oeminfo on this thread : https://forum.xda-developers.com/8-lite/how-to/share-oeminfo-t3740734
Beware, it locks your bootloader, so unlock it after you flash the file. Then start erecovery and download the nougat firmware to get your device ready for Oreo, then flash the HuRUpdater.zip . I hope this works!

marstonpear said:
If you get that build number issue on nougat it might be about your oeminfo partition. Try flashing PRA-LX1C432 oeminfo on this thread : https://forum.xda-developers.com/8-lite/how-to/share-oeminfo-t3740734
Beware, it locks your bootloader, so unlock it after you flash the file. Then start erecovery and download the nougat firmware to get your device ready for Oreo, then flash the HuRUpdater.zip . I hope this works!
Click to expand...
Click to collapse
is this rebranding changes my device IMEI adress? if it is so my unlock code do not work?

z1rqdym said:
is this rebranding changes my device IMEI adress? if it is so my unlock code do not work?
Click to expand...
Click to collapse
I don't think it changes the IMEI. I had a pra-lx1c464(Turkey) and I rebranded it to c432 I had no issues with it. It will change your device to Dual-SIM though if you have a single SIM device, which has no effect at all. I can still use my bootloader unlock code, and I have used it many time again and again after rebranding the device. Also you're trying to install PRA-LX1C432B322 Oreo right? Your device should be branded as PRA-LX1C432 first

is it neccesery to download the nougat rom from eRecovery over wifi?

z1rqdym said:
is it neccesery to download the nougat rom from eRecovery over wifi?
Click to expand...
Click to collapse
I'm not sure but it is necessary to have it branded as PRA-LX1C432

I will give a try flash the oeminfo c432 then try to flash nougat with nocheck image.

nope nothing works... I flashed the oem info from the link that you givin here. but the oeminfo doesnt change the Build number but the device changed to honor 8 lite chinese normal version on nougat. After flashed the oreo the build number dont changed and the themes not working file manager also not excist.

Factory reset
z1rqdym said:
nope nothing works... I flashed the oem info from the link that you givin here. but the oeminfo doesnt change the Build number but the device changed to honor 8 lite chinese normal version on nougat. After flashed the oreo the build number dont changed and the themes not working file manager also not excist.
Click to expand...
Click to collapse
Have you tried to reset the phone to its factory defaults . In this way I fixed missing apps problem .

I tried factory reset over Recovery bu it doesnt changed any thing. Then i tried the factory reset from the settings of the rom. Same result.

I just installed it manually. I have the 8.0.0.46 (08TO) but I don't have any issue, I have apps and themes..is it correct the version not should I expecting something different?
Please let me know

Same build number as in my settings. Themes wont work because regional issues. When i change phones language to english themes apps works well. Thats the themes app i admit it but.. in the other hand i dont get the in games(i dont remember the original name of it) app comes with oreo. I dont have the huawei login future anymore i think this is because of the unlocked bootloader not tried to look again then do a factory reset. I can not rebrand my phone. I know because when i flash europen oeminfo or not if i install the stock emui 5.0.3 again it says no build number against test keys . On the other side i can use my phone well i dont have any problem. And i forgot to say i dont even the file manager i installed the hidisk apk that i found on internet.
My advise is dont do this to your phones wait for a official update. But for us this is a long hard road