Secure Fail: Modem issue - Samsung Galaxy A6 Questions & Answers

Hey Guys, since there is no A6+ forum on XDA so far, I am putting my question in this forum hopefully I get your support.
I have A6+, I flashed official firmware with the right model number, and the process is successful using ODIN tool and I get the green message "PASS".
but after the reboot, it shows this message:
SECURE FAIL: MODEM
Security Error: this phone has been flashed with unauthorized software & is locked.
Any help is appreciated.

you have solved the problem ?

any one have sulition to fix flash a605x

Related

Soft brick update custom rom to stock 6.0.1

I have a SM-G900V that was on a custom 4.4.4 ROM. I'm selling the phone and wanted to give a stock but updated phone to the guy.
I downloaded the latest for 6.0.1 for the Verzion G900V and flashed it in Odin. It got a write fail. I tried again and it went further but then got another write fail.
Now when I try to boot the phone it goes to Software update failed error. I can boot again by long holding the power button. The phone is still recognized in Odin.
The bootloader was unlocked
The emmc was 15.
The build number of the custom ROM was: Build: KTU84P- G900VRU1ANI2
I'll keep searching for a solution but the guy I'm selling the phone to is freaking out so any and all help would be much appreciated.
update
I tried flashing the same build as what was on the phone AN12 and it failed with an Auth fail error in Odin. I did some research and saw that could be a CSC problem. I tried using Kies because I read you can find the CSC code that way. I couldn't get Kies to 'talk' to the phone. It saw that a phone was connected but it wouldn't created the connection. I tried firmware recovery but I need the serial number and Samsung in its infinite wisdom doesn't put the serial number on the sticker inside the phone (at least it doesn't on US Verizon).
It's a phone from Verizon (originally bought on contract) in the US and I have been using US Verizon downloads from either updato or sammobile (for the 4.4.4)
I could realy use some help. I'd like not to bork the phone by just trying hail mary solutions.

What does Secure Check Fail (Radio) mean?

A few days ago, I got an update for my Samsung Note 5 (SM-N920V) which is currently running Nougat, from Verizon Software Upgrade Assistant. I tried to run the update from my laptop and the update failed. I tried to run the repair and the repair failed. The error my phone was showing was "Secure Check Fail (Radio)." My device was bricked. I tried using Kies and SmartSwitch, but still get Secure Check Fail (Radio). I tried using ODIN, but still the error would show "Secure Check Fail (Radio)" at the end of the download. After using ODIN to download just the PIT file, it's working again, but I have in the settings "Service Provider: KT twophone service" and only have CDMA option for mobile networks (no APN settings). I was previously using this on a GSM network (not one of the big names).
Does anyone know what the "Secure Check Fail (Radio)" means?
Or how to get GSM access back on the phone?
(I am not trying to root the phone, I just want the stock Verizon version back!!)
akumm44 said:
A few days ago, I got an update for my Samsung Note 5 (SM-N920V) which is currently running Nougat, from Verizon Software Upgrade Assistant...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3220229
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
i have an n920t after flash with rom to convert it into n920c the baseband is unkown and there is no imei now ,i must do what ? flash modem ? with what please help me
valpo13m said:
i have an n920t after flash with rom to convert it into n920c the baseband is unkown and there is no imei now ,i must do what ? flash modem ? with what please help me
Click to expand...
Click to collapse
This is why you make a backup

vwz s8 won't install stock firmware

Ok try and do this as best as I can......
I bought a vwz S8 G950U used off someone from offer up was working fine when I bought it so when I got home I factory reseted to get all the users apps games etc off it and then it asked for a Google log in info (which I don't know) and I tryed to email the person but won't respond
So I tryed to install factory to binary to bypass it from what I been reading says I can do well I can get in factory binary now but now I cannot install oem stock firmware which I have downloaded 7.0 (what was on it ) says factory binary samsmobile and xda but every time odin3 gives me a fail message I have tryed odin3 3.127,3.13.1,3.12.3 and I think 1 more but every time I get a error....
So right now when I turn on the it his to factory binary mode and don't know of this helps but the battery won't charge past 80%....
What I'm asking if someone can be kind enough to help me out with this issue
P.S. I also tryed to instill Oreo 8.0 also but failed as well....
I can get any I go and post pics if that helps as well
Thank you in advance Jason A.KA. PpperoniRedd
trying to flash SM-G950U to stock and I keep getting SW Rev Check Fail fused 5 Binary 1
could anyone point me to what file i need to use i would appreciatw greatly as it has been a week and i have search on google and youtube and i can't figure it out
VZW S8 that had had FRP lock so i flashed to combination file and now I have only binary mode when the phone boot
when i go in binary mode and check under settings i have the followings
SM-G950U
Android 8.0
Secuirty Level Feb 1 2017
baseband: G950USQU5CRF1
Kernel 4.4.16-13344735
build NRD90M.FA70_G950USQU5ARG4
Download mode I have
Carrier : VZW
RPMB fuse blow
RPMB Provisioned
Current Binary: Samsung official
System Status : Official
FRP Lock : off
warranty void 0x0.
qualcom secure boot enabled
RP SWREV B5 (2.1.1.1.1) K4 S5
secure download enabled
G950usqu5crf1
I have the same problem, somebody already fix the problem?
does anyone know where to go after that error?, same error here if someone can point to the right direction will be appreciated
i have the same issue too, any idea guys?
0x0null said:
i have the same issue too, any idea guys?
Click to expand...
Click to collapse
5th digit back is boot loader bit number. This error is commonly from trying to flash with older firm Ware than on the devices
TheMadScientist said:
5th digit back is boot loader bit number. This error is commonly from trying to flash with older firm Ware than on the devices
Click to expand...
Click to collapse
I don't think so because i have 2 S8 with similar issues. I have the latest march firmware plus its confirmed bit5

N950XU (LDU) Flash Fail

Hey all. I decided to pick up a Note 8 Snapdragon variant LDU on eBay to see if I can get it to work on a stock rom. After researching through numerous posts on XDA and videos on YouTube, I took the plunge and decide to see for myself. I wanted to use a stock rom to get past the 70% battery cap on LDU's.
Some people claimed they were able to get it to run a stock rom and some failed. (Yes, this is a LDU. I bought it from a liquidator on eBay).
Here's exactly what I did (I've tried flashing many different roms, but to no avail).
1. Tried to enable OEM unlocking through developer options using date method = did not work.
2. Found me2151's thread on rooting Snapdragon variant of Note 8 = bootloop with QVPASS = 1 QVDONE = 1 prior to Samsung Note8 logo
3. Found a comment on me2151's thread saying they had the same bootloop... Solution was to check "phone bootloader update" (link here)
4. Tried above method in the comments and checked phone bootloader update = did not work, still on bootloop
5. Downloaded a stock rom for N950XU with Frija. ROM is N950USQS5CRL1, released 2018-12-27
6. Flashed the rom using ODIN v3.13.1_3B patched = did not work, "Security Error: This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost."
7. I'm still able to go into download mode despite that error, but I have no idea what to flash now...
Any help is appreciated! Just want to get it to boot to Android, don't even care if it's the retail rom.
Hey ,I have the same issue, also bought the phone from a liquidator last week, Did you find any workaround?
azrael235 said:
Hey ,I have the same issue, also bought the phone from a liquidator last week, Did you find any workaround?
Click to expand...
Click to collapse
We might have bought it from the same place then.
Which bootloader version is your phone on? If you didn't flash a newer ROM and is still on bootloader rev 1, then you may be able to fix it.
hi, i was able to remove modem fail error by flashing a modified version of cp file

My note 9 is blocked on "Custom Binary Blocked By FRP Lock", Odin doesn't worked

Hello everyone,
I'm currently experiencing a problem on my Note 9 since yesterday. I can no longer start it and every time I try I have a red message in the top left that says "Custom Binary Blocked By FRP Lock". I specify that I bought the phone new and I did not try to install any exotic firmware or whatever. After many searches, I wanted to install from the site Sammobile and the software Odin the right firmware while obviously wanting to keep my data (several well done tutorials are present on Youtube).
After many attempts to flash the phone with Odin (an old version as well as a new one) and from several firmwares (more or less recent as well), nothing works, the phone keeps restarting in loop as long as I keep the buttons pressed to tell me always the same message: "Custom Binary Blocked By FRP Lock".
A big thank you to whoever can help me !

Categories

Resources