Related
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
I have exactly the same issue. With identical error codes. Still trying to work out a solution.
on the Huawei website, the had a bootloader.img installer for older models but none for the p10/ p10 plus
Any advice would be appreciated
Let phone completely discharge even it power off automatically. Then put the phone on the charging it will boot up to system then go to settings >advanced settings>back up&reset> reset all settings
when it boot i cant see anything except black . i can only turn off or volume.
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Blackball said:
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Click to expand...
Click to collapse
it doenst work , i tried all combination. it always go to error when i tried. is it possible that some flash box could fix?
I never heard that someone killed his fastboot. Press longer the vol -
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
rosarioglen18 said:
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
Click to expand...
Click to collapse
sadly , i havent found any solution yet. sorry . i also wish to fix it
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
DallasCZ said:
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
Click to expand...
Click to collapse
thank you ,unfortunately it not possible to go to fastboot mode, when the phone on error state. pc also not detect. i apreciate the help.
1-the second link i posted is about to flash service stock firmware trough force update (vol+,vol-,power). have you tried?
2-what the phone does when you try to start the fastboot mode (connect with pc, turn phone off, turn phone on with vol- and power)?
3-what is your model number L09CxxxBxxx?
I have sam problem last 3 days and i cannot solwed
solution
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
p10 no recovery
franmasco said:
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
Click to expand...
Click to collapse
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
---------- Post added at 10:21 AM ---------- Previous post was at 10:09 AM ----------
fresigi said:
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
Click to expand...
Click to collapse
ps,,the model and VTR-L09 EUROPE, IF USE DLOAD, IS 5% BLOCK
p10 no recovery
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.[/QUOTE]
fresigi said:
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
[/QUOTE]
Hi, I was having the same problem. Mate 8 EMUI 8.
After looking everywhere and trying all the options available, I wasnt able to resolve.
Finally, I tried FunkyHuawei and got my system back through eRecovery.
Gave them the readings like version no. , build no...etc through fastboot. The required info is on their site. They then reverted with a link of the firmware which I flashed through their FuHunbrick tool. It force updates the entire full last version.
After flashing and booting, the system didnt boot but was able to go to eRecovery and restored my previous version.
If you or anyone else stuck at this error, they can try at their own risk as they dont guarantee anything.
Edit: you should and will be able to boot into fastboot once the battery is totally down and phone shuts off completely. Just press volume down button and insert usb. Try again and again if it doesnt work first time.
Thanks.
Help
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
elchino!!! said:
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
Click to expand...
Click to collapse
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
apat26 said:
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
Click to expand...
Click to collapse
Hi. I did the battery part and the part of the pressing the vol - is and connecting to pc. It started but didn't got into fastboot or bootloader, just turned on normally and then I ran the adb command "adb reboot recovery" and I had to do the battery part again. I am afraid to run "adb reboot bootloader" because the risks of the draining out the battery. I mean my phone does not enter into recovery.
Hello folks,
so a friend of mine is a complete noob and have this problem with his p9 plus.
The phone keeps rebooting itself in an endless loop, i can't access recovery and only when plugged in to the PC i can access fast-boot.
Phone is locked, FRP Lock.
With getvar command i managed to get this info:
rescue_phoneinfo: VIE-L09C113B170
seems that there is no full zip of this rom anywhere just partial ota (found those with firmware finder) but even with that when i try to flash recovery i get command not allowed.
On the fastboot screen of the phone i have this reboot reason AP_S_PANIC
anyone knows a how to get the phone out of this? (i was thinking that maybe unlocking the bootloader could be of any use, but in the request page it's needed the Product_ID and i don't have it. (can't *#*#1357946#*#*)
I don't know if it does work in a locked bootloader.
I have my P9+ for a week and maybe if you download a firmware compatible with your version and try to 'hard' update the phone, using a SD card with a update file on a dload folder and restarting the phone pressing VolUp + VolDown +Pwr, you can restore your friend's phone.
I'm sorry if I didn't help, I am myself stucked trying to rollback my version to MM and have the NFC and the Bluetooth working again...
myself also got this problem..please anyone..
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
try booting recovery from fastboot "fastboot boot *twrp image*.img"
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install..........
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Well i am not at all an expert in miui, infact this is my first mi phone. But i think this tool called xiaomi adb/fastboot tool can help u. Google it.... It is available in reddit. One piece of general advice : before any kind of experiment always keep a preparation for the worst case scenario. I think ur phone is stuck at boot. U can try to hold the power button for about 10-15 seconds to turn off. Also just relax and have patience... It will b solved. Let me know how it goes.
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Nevermind I misread... If you think clarity or the firmware messed up your phone I could give you my kernel and firmware for you to restore it
Though if you're desperate for a solution, I'd transfer a ROM into your phone and start over with it, you can flash MIUI also by flashing https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view after it
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Ok I solved the problem using this method.
So I removed back cover, disconnected battery, connected the 2 points with a twizzer then flashed STOCK rom and it worked!! So relieved!
Thank you for the help anyway.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
chandan shah said:
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Click to expand...
Click to collapse
Problem solved.
I got revived my redmi 4 again from softbricked locked bootloader,
By trying an older rom
santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgzWith miflash-20220218 in edl mode .
hi friends, i need so much your help!.
I have xaiomi mi5, the operating system of the cellphone has been updated, and then the device has entered the loop.
He can not get up at all.
I've tried to do so far:
FAST BOOT - but even the computer can not read the device despite all the permissions I have approved for the computer.
MIPCSUIT - does not work well because the computer does not recognize the device.
Your help must be smart and good people!
I am also stuck with the same problem.
At least I can get fastboot.
I think if you OK to loose data then just go to recovery mode with Volume up + power button pressed together. And wipe all. This may solve the problem. But I don't want to loose data I am skipping this option.
If any one knows other way to unbrick without full wipe then please let us know.
Thanks
have you unlocked bootloader?
you can try run by fastboot twrp recovery mode.
Code:
fastboot boot twrp.img
after few seconds phone boot to recovery, you can encrypt the phone and copy data.
twrp is here
My bootloader is locked I think.
I tried that command. Didn't boot to twrp.
Any other way.
Anyway Thanks for suggesting.
Are you on latest MIUI global stable? I think Xiaomi's guys ****ed it up this time around and got bootloop for everybody on latest update.
Take a read here and good luck: http://en.miui.com/thread-2776961-1-1.html
ok listen me... if you have got unlock permission and unlocked your phone or you have unlock code.. you must bind your acc with other xiaomi phone easly enter your acc and bind acc now go fastboot download mi flash unlocker install adb driver and unlock then you can flash stock rom i had that problem and i solved
Hello,
I had similar issue.
To be able to start phone/miui you should remove sim card,
in my case it was connected to connecting to cell network that caused reboot.
Than it will be possible to update phone using WiFi.
For me issue was solved with V9.5.2.0.NAAMIFA update.
BR Jarek.
jarek102 said:
Hello,
I had similar issue.
To be able to start phone/miui you should remove sim card,
in my case it was connected to connecting to cell network that caused reboot.
Than it will be possible to update phone using WiFi.
For me issue was solved with V9.5.2.0.NAAMIFA update.
BR Jarek.
Click to expand...
Click to collapse
Lifesaver here!
This worked perfectly for me! Go figure?
Cheers
You can try
I tried version gemini global images v10.2.2.0. OAAMIXM 2019115 GLOBAL but failed then tried v8.11.22.20181122.000 8.0 GLOBAL but failed then 2 month later i tried with good battery and good on off and main important is version GEMINI GLOBAL IMAGES 6.11.10 _20161110 and version GEMINI GLOBAL IMAGES V7.2.4.0.MAAMIDC 20160129. AND GUESS WHAT SUCCESS. NEVER TRY WITHOUT BATTERY AND WITHOUT EDL POINT. EDL POINT FOR UNLOCKING BOOTLOCK AND DOWNLOAD SOFTWARE FLASH FILES WITH GOOD INTERNET WITHOUT INTERUPPT SO FLASH SUCCESS. MY 2 MOTHERBOARD OF MI5 SAVED WITHOUT HARDWARE. HOW TO KNOW SOFTWARE OR HARDWARE....1ST CHECK CHARGING HAPPENING OR NOT IN SWITCH OFF AND CAN IT GO TO FASTBOOT MODE OR RECOVERY MODE. IF ALL THIS GOOD GO FOR FLASH IN SAME PROCESS. OTHERWISE HARDWARE AS STATED THAT RESISTOR ALSO PLAY A VITAL ROLE IN BOOTING OR STUCK AT MI LOGO. MOISTURE IN PHONE UNDER IC REQUIRE HEAT WITH PASTE AT HARDWARE LEVEL.
On Saturday appeared an OTA update to do on my mi A2 but after installed and restarting it died. It does not enter recovery mode and the screen is always on with android one bootscreen logo.
PS: I never flash the phone and i never change anyting in the system of the phone.
The only response that i have in the phone is enter in it Fastboot menu. I read some threads and untill now i cant fix my phone.
I will try to explain what i do:
I've tried using this tool https://forum.xda-developers.com/mi-a2/how-to/mi-a2-toolkit-unlock-bootloader-root-t3834585.
I try option 3 (Unbrick/Revert to Stock/Force update and the program tell me to unlock the bootloader.
When i tried to unlock bootloader by option 1 and then 1, 2 and 3 ( Unlock flashing critical, unlock OEM , unlock flashing ) the programs says: Failed Unlock is not allowed.
Then i try the response 9 to this thread https://forum.xda-developers.com/mi-a2/help/impossible-flashing-xiaomi-mi-a2-t3837565 to try unlocked the bootloader
But i have the same response ( Flashing Unlock is not allowed )
I read and i try but i cant unbrick my phone, someone can help?? Thanks
We are in the same boat buddy, the same thing happened to the phone of my wife.
It *sounds* like the update failed, and normally that would mean it would switch the slot back to the one that was working and boot that.
But you've tried a bunch of options from some tool, I've no idea what it did, as the tool doesn't tell you what commands it's doing.
I'd suggest to go to fastboot and see if you can tell which slot is active, then switch it to the other slot, then do fastboot reboot and cross your fingers
I have the same problem (for other reasons, but exactly the same problem). You can also try "fastboot oem edl", but it did not work for me, so I suppose you have little chance for it to work.
I have been searching and it looks like there are some "deep flash cables" that can make the phone enter edl mode to flash it using mi flash tool. Maybe these could work for us. There is apparently other way to enter edl mode, but it requires opening the phone (that I do not want to do) to short two test points.
I cant enter revorymode only fastboot mode. But when in fastbootmode my connected pc cant even find the phone. Im going to return the phone.
I have the same problem, I have this edl cable but so far no luck.
Do not realy k Ow how to use.
Are you sure it was the OTA update that bricked your phone? That Treble system isn't just there for the kicks, its there to prevent serious issues like these.
I'm stucked on fastboot, I don't want to open my phone. Could anyone help us? I already tried a lot of things, my computer doesn't recognize my mobile when is on fastboot mode. I already tried to install a lot of drivers or try to use differents adbs.