Code:
/*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
First i want to thank @phhusson for his work on Treble GSI!
Offical supported by me:
ATU-L2x
Features:
Based on LineageOS 15.0 - Android 8.0.0
First Android ROM released for Huawei Y6 (2018).
Installation:
Unlock your Bootloader!
Download the ROM
Enter fastboot mode on your device
Flash the ROM with: fastboot flash system [LOCATION AND FILE HERE]
Your device will reboot to erecovery and will do a factory reset so make a backup of important things!
Reboot your phone after the factory reset
Enjoy!
Bugs:
I haven't found one but report me bugs please!
Download:
Build 02072018
Build 05072018 (Including GApps and SU)
Enjoy!:good:
Can you add support for ATU-L22 too?
pascua28 said:
Can you add support for ATU-L22 too?
Click to expand...
Click to collapse
It will work on ATU-L22 but I don't have this model, but you can install it
Best regards?
Hi, thanks for the nice rom.
However, I can't install google apps on it.
Care to advise how to restore it to stock rom?
Can't find any of its stock firmware on the web.
Thanks.
y62018 said:
Hi, thanks for the nice rom.
However, I can't install google apps on it.
Care to advise how to restore it to stock rom?
Can't find any of its stock firmware on the web.
Thanks.
Click to expand...
Click to collapse
You might root your boot image with Magisk, download Gapps for Android 8.0 from OpenGapps.org and flash MagicGapps Magisk module. This module will install Gapps systemlessly.
Press the thanks button if i helped
Thespartann said:
You might root your boot image with Magisk, download Gapps for Android 8.0 from OpenGapps.org and flash MagicGapps Magisk module. This module will install Gapps systemlessly.
Press the thanks button if i helped
Click to expand...
Click to collapse
Do you mean to patch the stock boot image with Magisk?
I'm not very sure about that but will check it out and try.
Thanks!
iDecrypt said:
Code:
/*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
First i want to thank @phhusson for his work on Treble GSI!
Offical supported by me:
ATU-LXX
Features:
Based on LineageOS 15.0 - Android 8.0.0
First Android ROM released for Huawei Y6 (2018).
Installation:
Unlock your Bootloader!
Download the ROM
Enter fastboot mode on your device
Flash the ROM with: fastboot flash system [LOCATION AND FILE HERE]
Your device will reboot to erecovery and will do a factory reset so make a backup of important things!
Reboot your phone after the factory reset
Enjoy!
Bugs:
I haven't found one but report me bugs please!
Download:
Build 02072018
Enjoy!:good:
Click to expand...
Click to collapse
Thank you can you make a video of the ROM ?
It's working for scl-l01?
Kurajmo said:
It's working for scl-l01?
Click to expand...
Click to collapse
Please learn to read. LineageOS 15.0 FOR HUAWEI Y6 2018.
SCL-L01 is Huawei Y6 2015.
Thespartann said:
Please learn to read. LineageOS 15.0 FOR HUAWEI Y6 2018.
SCL-L01 is Huawei Y6 2015.
Click to expand...
Click to collapse
It's Y6 2015 custom rom forum you know that?
For Y6 2018 Must be new forum
y62018 said:
Do you mean to patch the stock boot image with Magisk?
I'm not very sure about that but will check it out and try.
Thanks!
Click to expand...
Click to collapse
Ah. As GSI images work in another way, you will have to wait until TWRP comes for your device.
Or if your rom is already rooted you could install Magisk directly from the Rom
If you want to restore Stock you should download Ereocovery from here: https://mega.nz/#!6eplUQAB!K4hfh2s-b_sSVSJ_Xxg65sywdpJHNRKtzs2ZMRr2bVk
Flash it from Fastboot.
After that get the stock rom for your device( An update.zip that should contain an update.app)
Something like this: http://huawei-firmware.com/rom/huawei-y6-2018/atu-l21/19931
And just do what it says here
Good luck
Hi, thanks for your notes about flashing stock rom.
Will try it out once I find the update file or the firmware.
Thank you!
pascua28 said:
Can you add support for ATU-L22 too?
Click to expand...
Click to collapse
y62018 said:
Hi, thanks for the nice rom.
However, I can't install google apps on it.
Care to advise how to restore it to stock rom?
Can't find any of its stock firmware on the web.
Thanks.
Click to expand...
Click to collapse
I will upload a new build later which includes the gapps
Best regards ?
That will be nice. Hopefully with root optional.
By the way, the backlight of my phone ATU-L22 seems dimmer after flashing the LOS15.0.
Not sure it's just my phone or the rom.
However appreciate the effort in making the rom!
Kurajmo said:
It's Y6 2015 custom rom forum you know that?
For Y6 2018 Must be new forum
Click to expand...
Click to collapse
Haha?
"Y6 2015 forum" - You are completly wrong.
This is Huawei Y6 forum. All of them 2015 2017 2018
Please do not provide information that is not correct.
Kurajmo said:
It's Y6 2015 custom rom forum you know that?
For Y6 2018 Must be new forum
Click to expand...
Click to collapse
You do know that creating a new forum isn't all that easy, right?
Also even if a new forum is made it'll be a subforum in our main fourms.
Also it clearly says (2018) in the title.
Thespartann said:
Haha?
"Y6 2015 forum" - You are completly wrong.
This is Huawei Y6 forum. All of them 2015 2017 2018
Please do not provide information that is not correct.
Click to expand...
Click to collapse
Don't be mad, its not my fool you create thread in Y6 2015 forum. Without scl-l01 support rom.
It's your fault and problem not mine.
Almost all custom roms available here have support multiple Y6 version of this phone.
You are not God, and not only one Active developer here. It's big community, with many Y6 available version of this phone.
That's why i just ask.
Not like my comments? Fine, but don't be rude against other people how just ask.
That's all from me.
y62018 said:
That will be nice. Hopefully with root optional.
By the way, the backlight of my phone ATU-L22 seems dimmer after flashing the LOS15.0.
Not sure it's just my phone or the rom.
However appreciate the effort in making the rom!
Click to expand...
Click to collapse
Build 05072018 (Including GApps and SU)
Here with GApps and SU activatable with developer options
Wow..that was fast!
Will try it out, thanks a lot! :good:
y62018 said:
Wow..that was fast!
Will try it out, thanks a lot! :good:
Click to expand...
Click to collapse
No problem!
Related
Note:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Thanks to @Displax
Thanks to Google & Xiaomi Team providing this Rom for Beta Tester
Guys Before flashing rom Think twice if you want to come back to Andriod 7.1, you need to flash Fastboot method or Mi flash tool this will wipe you data(Internal Storage)
Instructions:
Backup Your All Data & System
Download the Zip
Extract the zip
Paste the extracted folder TWRP/BACKUPS/df0bdeb70404/[UNOFFICIAL] AOSP OREO - tissot
Reboot to recovery
Wipe Data , System , Caches , Davlik Caches
Restore [UNOFFICIAL] AOSP OREO - tissot
Enjoy the rom
Bugs are there because its beta rom - Whatsapp and telegram sucks - use telegram plus
Download Link
[url]https://www.androidfilehost.com/?fid=817906626617952463[/URL]
XDAevDB Information
[ROM][8.0.0][UNOFFICIAL] AOSP OREO - tissot, ROM for the Xiaomi Mi A1
Contributors
@ramesh1686
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Version Information
Status: Testing
Created 2017-12-14
Last Updated 2017-12-14
Bangggg!
Holy moly..tats great man :good:
Is it same as the official beta build?
So this is a working dump of the beta?
Is everything working in this rom?
Very good work .... Awesome
Great.
is it working?
jazzthe#1 said:
Is it same as the official beta build?
Click to expand...
Click to collapse
yes
ihormaniuk said:
is it working?
Click to expand...
Click to collapse
Yes
What about stability so far? Great work man. Thanks
Finalyy its there!
Thanks a ton!
Is every bug fixed in this ??
What version of TWRP should we use ?
Thnks for your work brother ...
What are the bugs in initial beta ?
great !
great work man :good:
thanks a lot !
Deleted
Is it really a custom rom or just twrp backup file of official beta?
Apoorv AR said:
Is it really a custom rom or just twrp backup file of official beta?
Click to expand...
Click to collapse
TWRP backup of official beta
EDIT:
We have now achieved proper Treble implementation. We no longer need this method of trying to port a GSI to our device. This thread is now absolute. Please refer to newer threads to get Treble support on your Tissot devices.
UPDATE:
This ROM is currently not booting. So use this thread only to provide useful logs.
Interested developers can help me to try to port Treble :
https://github.com/ghpranav/android_device_xiaomi_tissot/tree/Trebelizer
https://github.com/ghpranav/proprietary_vendor_xiaomi/tree/lineage-15.0/
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
WARNING: You'll most probably loose ALL your data, and might break your phone, because our phone doesn't support Treble officially. Please use with extreme caution, because this hasn't been tested yet!
The goal of this ROM is to provide full Treble-compatible hardware support, and nothing else.
This means that hardware which DON'T have Treble API won't be supported, like Essential's external camera.
No feature will be added. This will ease forward porting to new Android versions, which is the very goal of Project Treble
My hope is that other ROM developers will use this ROM as a basis to construct more advanced ROM.
Devices will be marked as supported, unless known otherwise.
Click to expand...
Click to collapse
I have tried to port a Treble based rom to our Mi A1 device based on my knowledge of Treble. If this works properly, then we might be able to use almost any Project Treble rom on our device.
How to flash:
- First, you MUST be running on stock Android 8.0 ROM (OPR1.170623.026.7.12.29)
- Obviously, unlock your bootloader
- Download the zip file, & extract it.
- Flash the system.img to the correct active slot [A/B]
- Do a Factory reset
- Reboot
Downloads:
V1:
https://www.androidfilehost.com/?fid=962157660013069216
Changelog:
v1: (02/01/2018)
- Initial port based on Phh-Treble v7 (inc. gapps & su).
SuperSU and Magisk screws with SELinux policy. DO NOT USE SuperSU OR Magisk WITH THIS ROM.
XDA:DevDB Information
Phh-Treble Tissot, ROM for the Xiaomi Mi A1
Contributors
ghpranav, phhusson
Source Code: https://github.com/ghpranav/android_device_xiaomi_tissot/tree/Trebelizer
ROM OS Version: 8.x Oreo
ROM Firmware Required: OPR1.170623.026.7.12.29
Based On: AOSP
Version Information
Status: Testing
Current Beta Version: V1
Beta Release Date: 2018-01-02
Created 2018-01-02
Last Updated 2018-08-31
Reserved
Our device does not support Treble.
Looks sweet! Hope it'll work!
Once you upload it I will try it because I really want Mi A1 to have treble support
ghpranav said:
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution, because this hasn't been tested yet!
I have tried to port a Treble based rom to our Mi A1 device based on my knowledge of Treble. If this works properly, then we might be able to use almost any Project Treble rom on our device.
How to flash:
- First, you MUST be running on stock Android 8.0 ROM (OPR1.170623.026.7.12.29)
- Obviously, unlock your bootloader
- Download the zip file, & extract it.
- Flash the system.img to the correct active slot [A/B]
- Do a Factory reset
- Reboot
Changelog:
v1: (02/01/2018)
- Initial port based on Phh-Treble v7.
Downloads:
V1:
Uploading in progress
XDA:DevDB Information
Phh-Treble Tissot, ROM for the Xiaomi Mi A1
Contributors
ghpranav, phhusson
ROM OS Version: 8.x Oreo
ROM Firmware Required: OPR1.170623.026.7.12.29
Based On: AOSP
Version Information
Status: Testing
Current Beta Version: V1
Beta Release Date: 2018-01-02
Created 2018-01-02
Last Updated 2018-01-02
Click to expand...
Click to collapse
What ....... Is exactly treble ! Noob ! .......
Ayush061 said:
What ....... Is exactly treble ! Noob ! .......
Click to expand...
Click to collapse
U calling urself a noob or the OP ? :laugh:
Ayush061 said:
What ....... Is exactly treble ! Noob ! .......
Click to expand...
Click to collapse
https://www.androidauthority.com/project-treble-818225/
Kamefrede said:
Once you upload it I will try it because I really want Mi A1 to have treble support
Click to expand...
Click to collapse
Have you tried bro
Wow, will try that asap
Rajeev said:
U calling urself a noob or the OP ? :laugh:
Click to expand...
Click to collapse
Wat is OP ?
OP = Opening Post
ghpranav said:
UPDATE:
This ROM is currently not booting. So use this thread only to provide useful logs.
Click to expand...
Click to collapse
Useful logs?
Our device does not support treble
This ROM will never boot,I bet it doesn't even include any device related HAL.
Do you even know what treble is?
Konstantinosj77 said:
Useful logs?
Our device does not support treble
This ROM will never boot,I bet it doesn't even include any device related HAL.
Do you even know what treble is?
Click to expand...
Click to collapse
I know what Treble is. I tried to port ROM, instead of porting Treble support. But I failed. So now I'll wait for Xiaomi to release kernel source, so that I can try to create a separate vendor image partition, & try to implement HALs, so that we can actually port Treble itself. And yes, Treble support can be ported, for instance Mi5 devs are working on it, & it'll be released soon...
ghpranav said:
I know what Treble is. I tried to port ROM, instead of porting Treble support. But I failed. So now I'll wait for Xiaomi to release kernel source, so that I can try to create a separate vendor image partition, & try to implement HALs, so that we can actually port Treble itself. And yes, Treble support can be ported, for instance Mi5 devs are working on it, & it'll be released soon...
Click to expand...
Click to collapse
So mi5 devs are gonna create a new odm/vendor partition and push every hidl hal there?!
Interesting,can you share a link about that?
Konstantinosj77 said:
So mi5 devs are gonna create a new odm/vendor partition and push every hidl hal there?!
Interesting,can you share a link about that?
Click to expand...
Click to collapse
It's not yet hosted on XDA. But you can check their commits here:
https://github.com/sirmordred/platform_device_xiaomi_gemini
ghpranav said:
It's not yet hosted on XDA. But you can check their commits here:
https://github.com/sirmordred/platform_device_xiaomi_gemini
Click to expand...
Click to collapse
They are actually using another partition as /vendor.
https://github.com/sirmordred/platf...facc#diff-ada958ac3a6662f731884325169992e4R13
Still is not that simple for us. We don't got a spare partition to mark as /vendor.
Anyway,this ROM won't boot and trying to fix it is just a waste of time.
Thanks for sharing tho'.
Konstantinosj77 said:
They are actually using another partition as /vendor.
https://github.com/sirmordred/platf...facc#diff-ada958ac3a6662f731884325169992e4R13
Still is not that simple for us. We don't got a spare partition to mark as /vendor.
Anyway,this ROM won't boot and trying to fix it is just a waste of time.
Thanks for sharing tho'.
Click to expand...
Click to collapse
That guy started using cust as vendor partition. So I was wondering, cannot we destroy A/B thingy, & start using system_b as vendor?
Edit: /cust wasn't a spare partition I guess, cuz look at these ss
So we can use /cust partition as /vendor and make our device treble compatible? Are there any problems in theory?
ddaggebi said:
So we can use /cust partition as /vendor and make our device treble compatible? Are there any problems in theory?
Click to expand...
Click to collapse
In theory, as long as we don't return to stock rom, & if group of devs actually make that possible for a device, there shouldn't be any major problems. But unfortunately Tissot doesn't have any cust partition. So we'll have to look for something else...
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
The Viper's poison.
Let it flow.
INSTALLATION INSTRUCTIONS
Same as every ROM since the beggining of custom roms flashing.
Wipe Cache - Data - Dalvik
Install.
CHANGELOG
Viper-hi6250-20180321
-initial build
Viper-hi6250-20180322
-removed baked-in su binary
-added COH extras
-NFC should be fixed
-untested on devices, need feedbacks.
-maybe final version due to lack of support by ViperOS team (security patch related)
Viper-hi6250-20180324
-Updated to R36
DOWNLOADS
Viper-hi6250-20180321-Coral-v3.1.1-UNOFFICIAL.zip
Viper-hi6250-20180322-Coral-v3.1.1-UNOFFICIAL.zip
Viper-hi6250-20180324-Coral-v3.1.1-UNOFFICIAL.zip
XDA:DevDB Information
ViperOS, ROM for the Huawei P8lite/P8 Lite
Contributors
dil3mm4.dev, COH devs, LOS devs, ViperOS devs
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: None
Based On: LOS
Version Information
Status: Stable
Kernel Sources
https://git.stargazer.at/dil3mm4/android_kernel_huawei_prague
Created 2018-04-06
Last Updated 2018-04-05
Does anyone actually realise how excruciating It would be to have venom flowing through your veins?
i've installed this ROM, its realy fluid, smooth
Its the best ROM
thanks a lot
Bugs?
I found just one bug so far, when i type in to call a ussd code like in my country *100# it's just skip that command. Everithing else is flawless.
Sent from my HUAWEI P9 lite using Tapatalk
---------- Post added at 12:32 AM ---------- Previous post was at 12:31 AM ----------
I found just one bug so far, when i type in to call a ussd code like in my country *100# it's just skip that command. Everithing else is flawless.
Guysho_2112 said:
Bugs?
Click to expand...
Click to collapse
Sent from my HUAWEI P9 lite using Tapatalk
My proximity sensor didn't work with this rom. So the screen didn't dim between calls and the autobrightness setting didn't work. Otherwise its a great rom, but becouse of the issues I switched back to Lineage 14.1. Is that a bug or is it just an issue on my part?
I don't have that issue, I'm on L21 c432.
I have a issue with a ussd code like in my country *100#, etc..
jura123 said:
My proximity sensor didn't work with this rom. So the screen didn't dim between calls and the autobrightness setting didn't work. Otherwise its a great rom, but becouse of the issues I switched back to Lineage 14.1. Is that a bug or is it just an issue on my part?
Click to expand...
Click to collapse
Sent from my HUAWEI P9 lite using Tapatalk
WOW... It seems to be great... There are screenshots?
Would I install this on a p9 lite then install a Nougat rom? (I'm on Marshmellow)
I think you shoud first install nougat, after that this rom..
Just Dan said:
Would I install this on a p9 lite then install a Nougat rom? (I'm on Marshmellow)
Click to expand...
Click to collapse
Sent from my HUAWEI P9 lite using Tapatalk
Nelle9900 said:
I think you shoud first install nougat, after that this rom..
Click to expand...
Click to collapse
Wdym? Like install Nougat through a ota update? I can't if that's what you mean but I thought this is android 7 but it doesn't need a emui 5 firmware to be installed
Try it then, but first backup everything
Just Dan said:
Wdym? Like install Nougat through a ota update? I can't if that's what you mean but I thought this is android 7 but it doesn't need a emui 5 firmware to be installed
Click to expand...
Click to collapse
Sent from my HUAWEI P9 lite using Tapatalk
First thing you do when you post new thread about new rom, is to upload screenshots.
Can't boot custom ROM in Huawei P9 Lite
Hi!
First of all sorry if this is not the right place to post this problem!
I'm having a very dissapointing experience trying to install custom roms in the Huawei P9 Lite, after many instalations of different roms I always get stucked in the initial screen with the message "Your device is booting now...." . I've tried everything and I've followed all the instructions:
- bootloader unlocked
- device rooted
- twrp from meticulus
- swipe data, system, cache , davlink before installation
- installed the gapps
Everything seems to work perfectly, however it is impossible to boot in the operating system . I have a vns-l31 that originally was L31c900B130 and thenI changed to L31C432B162.
Please I need some help, I don't know what else can i do!
thanks!!!
what do i type here
nnnnnnnnn
Is this ROM still updated and supported?
ViperOS itself is discontinued. This specific Viper rom also seems to be abandoned.
Awesome Job on this ROM. I have it working on my Honor 6X (BLN-L24) which is also an hi6250 variant, and its the best one out there that I've tried for the 6x. And to think I had to come to the p9 lite forums for better variety! Anyway, thanks for the good work here to the dev team!
smarichal said:
Hi!
First of all sorry if this is not the right place to post this problem!
I'm having a very dissapointing experience trying to install custom roms in the Huawei P9 Lite, after many instalations of different roms I always get stucked in the initial screen with the message "Your device is booting now...." . I've tried everything and I've followed all the instructions:
- bootloader unlocked
- device rooted
- twrp from meticulus
- swipe data, system, cache , davlink before installation
- installed the gapps
Everything seems to work perfectly, however it is impossible to boot in the operating system . I have a vns-l31 that originally was L31c900B130 and thenI changed to L31C432B162.
Please I need some help, I don't know what else can i do!
thanks!!!
Click to expand...
Click to collapse
Happy new year to all you peoples here !!!
Dude B162 is related to Marshmallow (android 6.0 / Emui 4) firmware
and you cannot flash a rom based on Android 7.0 / Emui 5...
So find a way to upgrade to android 7.0 first, then you can flash
custom roms like this based on emui 5.
I hope I have explained the dynamics well...
P.S.: @Dil3mm4, sorry for the spam.. :angel:
Does it work on the L31?
I'm looking for a ROM that work on the Huawei P9 Lite (VNS-L31). Even though it says "ROM for the Huawei P8lite/P8 Lite", some replies contains "Sent from my HUAWEI P9 lite using Tapatalk ". So does it work on the VNS-L31?
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on sagit
Read Post #2 before asking a question.
Download link:
LineageOS Downloads
Recommended Google Apps package:
Open GApps (choose ARM64 as Platform and 9.0 as Android, use the Variant you want. Recommended nano package)
Required TWRP recovery
twrp-3.3.1-sagit-20190608.img
Official root addon
LineageOS Extras
Changelog:
Changes for sagit
Bug reports:
How to submit a bug report
LineageOS GitLab
Donate to support development:
Donate via PayPal to NeoArian
Donate via PayPal to Elektroschmock
Donate via PayPal to LineageOS
XDA:DevDB Information
LineageOS 16.0 for sagit, ROM for the Xiaomi Mi 6
Contributors
NeoArian, elektroschmock, mikeioannina, wight554
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI Stable V10.4.1.0
Version Information
Status: Nightly
Created 2019-06-09
Last Updated 2019-08-05
MiuiCamera
I have created a flashable ZIP to get MiuiCamera on LineageOS 16.0 for Xiaomi Mi 6 with the new android 9.0 blobs.
The file is attached to this post. Note that it will overwrite the default Snap Camera app so that you don't have two apps. Because of the included addon.d script the Snap Camera will automatically get overwritten and MiuiCamera will get installed over upcoming OTA's. If you want to get rid of this Module just remove /system/addon.d/69-MiuiCamera.sh and reflash the build of your choice, MiuiCamera will get removed and Snap will be added back.
Changelog for MiuiCamera-20190817_MI6Global_V10.4.1.0.PCAMIXM.zip
* Fixed backuptool, won't bootloop after updating the ROM
* Cleaned backuptool
Frequently asked Questions
Which firmware should i use?
Since the 4th of August 2019 You need the firmware of any 9.0 miui. Download the Global Stable firmware here: https://osdn.net/projects/xiaomifir...I6Global_V10.4.1.0.PCAMIXM_38edd1584c_9.0.zip
You have to use an firmware older then 8.10.25 but at least 8.4.19. Download the 8.4.19 firmware here: https://basketbuild.com/filedl/devs...st 2019 You need the firmware of any 9.0 miui
Click to expand...
Click to collapse
[*]Which recovery should i use?
You should use this TWRP: https://androidfilehost.com/?fid=6006931924117891801 because the official one is not up to date with this ROM and can't decrypt your data. Don't use a recovery for System as Root because this official LineageOS does not use System as Root.
Click to expand...
Click to collapse
Thanks boss
Great news!
Indeed good news!! ?
Maybe a stupid questionar, but where is the download link?
felipefda said:
Maybe a stupid questionar, but where is the download link?
Click to expand...
Click to collapse
Yeah there is a small typo in the OP, but it's at:
https://download.lineageos.org/sagit
Thorst1 said:
Yeah there is a small typo on the OP, but it's at:
https://download.lineageos.org/sagit
Click to expand...
Click to collapse
The link only show 15.1 version.
---------- Post added at 01:21 AM ---------- Previous post was at 01:20 AM ----------
The link only show 15.1 version.
felipefda said:
The link only show 15.1 version.
Click to expand...
Click to collapse
Then it'll be on its way, next build cycle ?
Thank you so much :good:
amazing thank you! still see 15.1 , will wait official build upload
Thanks!!! What's the difference between this ROM and the other?
Looks like server storage is full and all builds that are compiling today are failing with same error message.
https://gitlab.com/LineageOS/builder/android/-/jobs/228136752
Code:
#### build completed successfully (01:21:13 (hh:mm:ss)) ####
mkdir: cannot create directory ‘/home/jenkins/incoming/sagit/65452191/’: No space left on device
ERROR: Job failed: exit status 1
Whats the difference from your build on the other thread (beside different twrp and firmware)?
Should I stay with your build or move to official?
rtk217 said:
Whats the difference from your build on the other thread (beside different twrp and firmware)?
Should I stay with your build or move to official?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=79702231&postcount=630 I would recommend you to read this post.
nightly its uploaded
Anyone flash it?
I Will try in evening.
Some might have noticed, the first build is up!
Get it from the download Portal: https://download.lineageos.org/sagit
thank you a lot
in order to have eas and f2fs can we flash kernel like vantom?
Alessandro999 said:
thank you a lot
in order to have eas and f2fs can we flash kernel like vantom?
Click to expand...
Click to collapse
Perhaps you should ask the person who maintains this kernel.
LineageOS is like an OEM ... we don't care about/support aftermarket modifications.
Edit:
Haha I didn't realize Arian maintains this kernel.
Nevertheless you should ask in the apropriate kernel thread
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
* Prerequisites:
- TWRP: twrp-3.3.1-sagit-20191204.img
Boot to TWRP
Wipe cache, system, vendor and data
format data
reboot to twrp
flash LineageOS 17
boot and enjoy
Download:
LineageOS 17.1 for Mi 6
Device Sources:
https://github.com/xiaomi-msm8998
Bugs:
* Android Auto
Donate to support development:
Donate via PayPal to NeoArian
XDA:DevDB Information
LineageOS 17 for Mi 6, ROM for the Xiaomi Mi 6
Contributors
NeoArian
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-09-08
Last Updated 2020-01-19
GAPPS
Google Apps are included in these builds. Do NOT flash any additional packages.
FIRMWARE
Download the Global Stable 9.0 firmware here: https://osdn.net/projects/xiaomifir...I6Global_V10.4.1.0.PCAMIXM_38edd1584c_9.0.zip
OTA Updates
OTA Updates are support by default.
TELEGRAM
Automated release channel for all my public builds: Releases by Arian
Automated update channel for build starts/ends: Updates by Arian
Xiaomi Mi 6 Discussion Group: Xiaomi Mi 6
Xiaomi Mi 6 Arsenal, general release channgel: Xiaomi Mi 6 Arsenal
Thanks for awesome work. What about recommended gapps ?
cethine said:
Thanks for awesome work. What about recommended gapps ?
Click to expand...
Click to collapse
I haven't got a perfect GAppe package yet.
Currently I'm using this one: https://t.me/c/1120152719/245769 (can't mirror it right now, it's on telegram, to open it join t.me/xiaomimi6arsenal and tap on discussion). It doesn't offer to restore your apps and device settings and the apps are outdated (will be updated from Google play though). Apart from this I'm fine with them for now.
hi , no more updates on UNOFFICIAL] LineageOS 16.0 for sagit ?
whitexp said:
hi , no more updates on UNOFFICIAL] LineageOS 16.0 for sagit ?
Click to expand...
Click to collapse
Probably not. I have updated my phone to lineageos 17 today and will work on this for now.
Ohh yeah been waiting for that. Though the new android features don't spark any excitement.
Could you provide screenshot on each sections? Thank you.
Hey arian gapps not working
as far as I can identify, there is no problem right now good work
Bluetooth Audio has been fixed!
Download: lineage-17.0-20190909-UNOFFICIAL-sagit.zip
Magisk support is also fixed, you can flash the latest canary build now.
These GApps by wight554 are working pretty good for me: BiTGApps-10-Wight554.zip
Note that backuptool doesn't work so you have to reflash them after every update.
NeoArian said:
Bluetooth Audio has been fixed!
Download: lineage-17.0-20190909-UNOFFICIAL-sagit.zip
Magisk support is also fixed, you can flash the latest canary build now.
These GApps by wight554 are working pretty good for me: BiTGApps-10-Wight554.zip
Click to expand...
Click to collapse
Wow, lineage os 17 on our mi6, just can't belive it...thanks for all your hard work!
Nice work!! I will install soon, thanks!
Amazing job, congratulations
I'm hoping to be able to install stock gapps. Good job. Thanks.
Android 10 GApps
Can anyone try the following Android 10 GApps and confirm if this works on LineageOS 17?
Should i use a firmware a firmware zip?
diseriocarm123 said:
Should i use a firmware a firmware zip?
Click to expand...
Click to collapse
Look at the second message.
Great work. Feedback: stock SMS app does not give any notifications; clock app forces close when ringing at set time. Thank you again.
I flashed Gapps but it does not work. So I back to Xiaomi EU Rom untill stable gapps.
anticor248 said:
I flashed Gapps but it does not work. So I back to Xiaomi EU Rom untill stable gapps.
Click to expand...
Click to collapse
Well the gapps just work. You should use the one from post #2. It just includes the playstore and needed dependencies.
cn.fyodor said:
Great work. Feedback: stock SMS app does not give any notifications; clock app forces close when ringing at set time. Thank you again.
Click to expand...
Click to collapse
I would recommend you to use the Google apps from playstore for now. Work ok the stock apps will start soon.