Guys which rom is best and most stable? - Xiaomi Mi 8 Questions & Answers

Do I need to unlock the bootloader to change rom and for magisk?
Does viper works?
Gesendet von meinem LEX820 mit Tapatalk

You need to unlock.
Suggest you use xiaomi.eu.

_katho_ said:
You need to unlock.
Suggest you use xiaomi.eu.
Click to expand...
Click to collapse
Thank you for quick response mate, understood what to do [emoji106]
Gesendet von meinem LEX820 mit Tapatalk

Related

[Q] Can´t find JB_92.2.26001.retail.en.Eu anywere!!

Hi all!!
I usually try to avoid this kind of posts, but i'm afraid that i wasn´t able to find the file 92.2.26001.retail.en.eu in order to install the arman68's infiniROM v6.
I searched all over the internet (i'm not kidding, i think i've been trying for more than 6 hours), but i just cant find the flashable file...
So if someone can just be so kind to please provide me a functioning link i'll very greatfull!!
Thanks
http://sbfdownload.droid-developers.org/smi/CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip
Gesendet von meinem XT890
not there
HSD-Pilot said:
http://forum.xda-developers.com/showthread.php?p=40417328
Gesendet von meinem XT890
Click to expand...
Click to collapse
it isn't there man.
thanks the same.
Take the edited Link
Gesendet von meinem XT890
is this it?
HSD-Pilot said:
Take the edited Link
Gesendet von meinem XT890
Click to expand...
Click to collapse
i´m downloading it but the name: CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip..
Is it the same firmware?
Jep, that's the only JB EU Fastboot out there.
USASMI "JBRTEU" = Jelly Bean Retail EU :thumbup:
Gesendet von meinem XT890 mit Tapatalk 2
thanks a lot!!
HSD-Pilot said:
Jep, that's the only JB EU Fastboot out there.
USASMI "JBRTEU" = Jelly Bean Retail EU :thumbup:
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Yeeeeaah!!!
Thank you very much man!!
Just a couple more questions:
1) I´m on Pi LLama 0.8 ROM, and i want to flash this SBF on top of it, are there eny risks of bricking?
2) Do you think that Arman68 infiniROM is going to work all right on top of this firnware?
Thank you again!
Just charge your battery a lil bit (min. I flashed an sbf was 30%) and backup your internal sd card (it will get wiped).
Armans Rom should work well with this sbf, it's meant to run on it
I never tried it, because I'm no fan of the sd card swap. But if something goes wrong, the sbf will always bring you back to Stock.
Gesendet von meinem XT890 mit Tapatalk 2
thanks
HSD-Pilot said:
Just charge your battery a lil bit (min. I flashed an sbf was 30%) and backup your internal sd card (it will get wiped).
Armans Rom should work well with this sbf, it's meant to run on it
I never tried it, because I'm no fan of the sd card swap. But if something goes wrong, the sbf will always bring you back to Stock.
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Again thanks a lot for your help!
Auf wiedersehen!!

[Q] Get BE2 work?

Anyone know if this http://forum.xda-developers.com/showthread.php?t=2301489 can work on our XZ? Maybe there is something of similar?
I found also this http://forum.xda-developers.com/showthread.php?t=2457538... I think it's possible but I wait a reply from someone more prepared ...
If you try it then make sure you have a nanddroid backup!
Gesendet von meinem C6603 mit Tapatalk
gripfly said:
If you try it then make sure you have a nanddroid backup!
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
WORKED! I have followed the second guide using official xperia z ftf for rom and kernel and it worked! Now I have BE2 fully working with no DRM keys!!!
Thats fine, thx for trying. I will remember if I need it once
Gesendet von meinem C6603 mit Tapatalk
greasegraphic said:
WORKED! I have followed the second guide using official xperia z ftf for rom and kernel and it worked! Now I have BE2 fully working with no DRM keys!!!
Click to expand...
Click to collapse
You should start a thread for it.
Sent from my C6603
joejoe23 said:
You should start a thread for it.
Sent from my C6603
Click to expand...
Click to collapse
I can't start thread in developer section...
greasegraphic said:
I can't start thread in developer section...
Click to expand...
Click to collapse
Not enough posts or what is the reason?
If you want I can post(if I am able to do). But you have to write all xD
Gesendet von meinem C6603 mit Tapatalk
gripfly said:
Not enough posts or what is the reason?
If you want I can post(if I am able to do). But you have to write all xD
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
Not enough posts and I have a bad englis (I'm Italian) xD
Anyway when I find some time , I try to write a guide
greasegraphic said:
Not enough posts and I have a bad englis (I'm Italian) xD
Anyway when I find some time , I try to write a guide
Click to expand...
Click to collapse
Haha ok up to this time you will have enough posts for dev section (my english is also bad)
Gesendet von meinem C6603 mit Tapatalk

So yea...

I can't get any other rooting software except kingo to root my device...Ive tried just about every rooter on here, and from what im just now reading on here kingo has severe security issues...which has me worried. Would that be a possible explanation for the roms im installing not allowing my wifi to activate? Cause if so id, like help actually getting one of these root...ers, on here to actually root my device.
But I always get that weird system/bin/su not found error when I use doomlordz easy rooter...with kingo It's flawless and quick, but there's probably a really bad reason for that....help please...
Doomlords methods have to work fine.
Which build do you have?
Usb debugging and unknown source/origin on?
Gesendet von meinem C6603 mit Tapatalk
gripfly said:
Doomlords methods have to work fine.
Which build do you have?
Usb debugging and unknown source/origin on?
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
Yes sir, im on 10.3.1.E.0.191 on the t-mobile C6606... USB and unknown source allowed. It always says there is a system/bin/SU error Which is frustrating because i know it has to work, hundreds of others have done it, so that means its either my phone or me messing up somewhere along the lines....and id really like to not have china Tracking me on GPS and sending a missile through my bedroom window.
Link me the thread which you used
Do you have used the newest version of flashtool?
Gesendet von meinem C6603 mit Tapatalk
Tragediya said:
Yes sir, im on 10.3.1.E.0.191 on the t-mobile C6606... USB and unknown source allowed. It always says there is a system/bin/SU error Which is frustrating because i know it has to work, hundreds of others have done it, so that means its either my phone or me messing up somewhere along the lines....and id really like to not have china Tracking me on GPS and sending a missile through my bedroom window.
Click to expand...
Click to collapse
Doom's method don't work as you're not on a stock 0.67 firmware, but on a carrier specific firmware.
Correct me if i'm wrong but kingo is the only way.
Gesendet von meinem C6603 mit Tapatalk
gripfly said:
Link me the thread which you used
Do you have used the newest version of flashtool?
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=42659579#post42659579
Tommy-Geenexus said:
Doom's method don't work as you're not on a stock 0.67 firmware, but on a carrier specific firmware.
Correct me if i'm wrong but kingo is the only way.
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
So since kingo is the only way does that mean there is no way to fix the Wifi, not working issue? it doesn't turn on...its greyed out and when I can press it it just keeps saying turning on...I use the PhilzTouch Recovery system....
And this is the Rom im trying to install as I am stuck with a locked bootloader http://forum.xda-developers.com/showthread.php?t=2351803
Tommy-Geenexus said:
Doom's method don't work as you're not on a stock 0.67 firmware, but on a carrier specific firmware.
Correct me if i'm wrong but kingo is the only way.
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
And he will brick the device if he flash to .67?
Gesendet von meinem C6603 mit Tapatalk
gripfly said:
And he will brick the device if he flash to .67?
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
tis a sad day for me.
gripfly said:
And he will brick the device if he flash to .67?
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
Tragediya said:
tis a sad day for me.
Click to expand...
Click to collapse
Take a look at this thread
http://forum.xda-developers.com/showthread.php?t=2546964
Gesendet von meinem C6603 mit Tapatalk
Tragediya said:
tis a sad day for me.
Click to expand...
Click to collapse
Relax... Things are not bad.
Tommy-Geenexus said:
Take a look at this thread
http://forum.xda-developers.com/showthread.php?t=2546964
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
Exactly! Just reflash the 191 ftf I posted here without wiping: http://forum.xda-developers.com/showthread.php?t=2538544
Then root using the link Tommy-Geenexus provided: http://forum.xda-developers.com/showthread.php?t=2546964
Easy Peasy!

[Q] Change From Android M to Lollipop 5.1.1

Hello, can I change from Android M to Lollipop 5.1.1 back? My Battery stats are very bad. Can you help me please.
Gesendet von meinem Nexus 6 mit Tapatalk
yes, just flash a 5.1.1 factory image, just like you did with the m factory image.
How can i do this?
Gesendet von meinem Nexus 6 mit Tapatalk
Chilla61 said:
How can i do this?
Gesendet von meinem Nexus 6 mit Tapatalk
Click to expand...
Click to collapse
Guides are in general > sticky roll-up.
Read about fastboot and returning to stock.
Chilla61 said:
How can i do this?
Gesendet von meinem Nexus 6 mit Tapatalk
Click to expand...
Click to collapse
how did you flash m?
OTA Update
Gesendet von meinem Nexus 6 mit Tapatalk
Chilla61 said:
OTA Update
Gesendet von meinem Nexus 6 mit Tapatalk
Click to expand...
Click to collapse
you didnt flash m via ota, as there was no ota for it. there was an ota for m version 2, but you had to be on m to get it. so, how did you flash m?
---------- Post added at 03:38 PM ---------- Previous post was at 03:36 PM ----------
anyways, heres instructions on how to flash a factory image http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
I have the review 2 and this came OTA
Gesendet von meinem Nexus 6 mit Tapatalk
Chilla61 said:
I have the review 2 and this came OTA
Gesendet von meinem Nexus 6 mit Tapatalk
Click to expand...
Click to collapse
right.. but how did you install actual m not version 2? flaahing the factory image probably. anyways, i left you a link with instructions above

[kernel][emui-5] huawei p10 lite [testers needed!]

Hello! As I compiled a kernel for the Huawei P10Lite with some features contained I would like every user who is unlocked and has TWRP installed to PM me to test my kernel.
Regards,
felix-development
Gesendet von meinem Honor 6X mit Tapatalk
Send me mate
kisvagen said:
Send me mate
Click to expand...
Click to collapse
Please tell me first if you are on stock or custom rom.
Gesendet von meinem Honor 6X mit Tapatalk
Stock lx1c432b198
kisvagen said:
Stock lx1c432b198
Click to expand...
Click to collapse
Then forget it
Gesendet von meinem Honor 6X mit Tapatalk
removed
Ah sad ;( im really want a good stock kernel with various tweaks improvents ...
kisvagen said:
Ah sad ;( im really want a good stock kernel with various tweaks improvents ...
Click to expand...
Click to collapse
You can try my kernel on stock but I can't give any guarantee that it works or even boots.... Just make a Backup of Boot Partition before you flash kernel that you can restore Stock Kernel If something went wrong... Report pls...
Gesendet von meinem Honor 6X mit Tapatalk
U can tell me how make backup of my boot thing? In twrp?
kisvagen said:
U can tell me how make backup of my boot thing? In twrp?
Click to expand...
Click to collapse
Go to Backup - Select Boot - swipe to confirm.
If you want to restore - Go to restore - select your backup you did - swipe to confirm - reboot - done
Gesendet von meinem Honor 6X mit Tapatalk
Oh okay thank u soo much!!! I will report back if its working or if it has some bugs
kisvagen said:
Oh okay thank u soo much!!! I will report back if its working or if it has some bugs
Click to expand...
Click to collapse
It would be great, if Kernel booted for you, to send me a screenshot of your "about phone" (with your IMEI ereased of course) to let me see device model and kernel version
Gesendet von meinem Honor 6X mit Tapatalk
Tried to flash but unsupported device
kisvagen said:
Tried to flash but unsupported device
Click to expand...
Click to collapse
let me check my zip... bbl
Gesendet von meinem Honor 6X mit Tapatalk
kisvagen said:
Ah sad ;( im really want a good stock kernel with various tweaks improvents ...
Click to expand...
Click to collapse
which twrp do you have installed?
Gesendet von meinem Honor 6X mit Tapatalk
3.1.1.2
Here there is that command line in updater script
kisvagen said:
Here there is that command line in updater script
Click to expand...
Click to collapse
If you know how to edit it to pass yourself installation, then do it... i am not at home so otherwise you need to wait
Gesendet von meinem Honor 6X mit Tapatalk
Sadly no What if i make write "match=1" to "match=0" ?
felix-development said:
Hello! As I compiled a kernel for the Huawei P10Lite with some features contained I would like every user who is unlocked and has TWRP installed to PM me to test my kernel.
Regards,
felix-development
Gesendet von meinem Honor 6X mit Tapatalk
Click to expand...
Click to collapse
Hi, i would like to test, using emui 5 based Resurrection remix (by based i mean it has some files such as libs from huawei)

Categories

Resources