I have an Android One phone, and on the stock ROM LTE works fine with Boost Mobile (Sprint). But, when using LineageOS (or Resurrection Remix), I only get 3G.
The APN settings seem correct, but when I click "carrier v settings" it crashes. On the stock ROM, this brings up SprintDM to let me update the PRL.
Is there a way to get LTE working in a custom ROM? I tried using Titanium Backup to backup SprintDM from stock, but when I tried to restore it on the custom ROM, it just sat there and didn't do anything.
I've read that CDMA is a mess, and I may just stick to the stock ROM if LTE doesn't work without it.
Related
For those interested I have flashed Omega v3.1 for i9505 on my Sprint SPH-L720
By no means am I recommending flashing this on Sprint.
I am just relaying my experience YMMV
The latest version of Omega for i9505 GS4 can be found here
http://forum.xda-developers.com/showthread.php?t=2253528
Before I flashed Omega I was already on MDL update and I replaced the following files in the Omega zip:
boot.img in "indie\" with a boot.img from one of the custom MDL kernels available for SPH-L720.
"system\lib\modules" with Stock MDL "system\lib\modules" then copied over "system\lib\modules" from the chosen custom MDL SPH-L720 kernel. (This was to first replace with stock modules then replace with custom kernel modules to account for overlap)
"system\build.prop" and "system\kern_sec_info" with those files from your chosen MDL ROM or stock MDL ROM.
I am not sure exactly what any of these modifications did to make Omega boot on a SPH-L720. It just seemed like the logical thing to do.
If you look in the updater-script the install also backs up the efs partition fyi. Remove from updater-script if desired.
Some of the aforementioned modifications may not be necessary.
Initially after booting, Mobile data did not seem to work, but after a reboot and about 10mins 3G started working.
Still no 4G yet. I will update if I get 4G active.
Please Assist if you can
In "Settings->Connections->More Networks->Mobile Networks" there is an option for "Connections optimizer"
This is not available in stock settings.
There is also no longer the "Smart Mode" in Wifi settings.
I have blindly tried replacing the settings.jar in "system/framework" with stock then booted into recovery and wiped cache and dalvik then rebooted and settings are still the same.
If anyone wants to check this out or provide any feedback it would be greatly appreciated.
Edit: 6/1/2013
I have been messing around with this all day replacing various files with ones from stock MDL and still can only get 3G data working.
Initially after flashing if you look in "About Device -> Status" the phone is connected to the LTE band but data will not connect. After about 10 mins 3G connects and 4G will not reconnect.
If anyone can get 4G working on this please share what you did to get it working.
There is an easier way...
http://forum.xda-developers.com/showthread.php?t=2295557
if you are connected to LTE but status bar shows 3g look at the systemui and see if you have the lte pngs.
I was able to flash v19 omega rom i9505 version without any need of a kernel. Phone numbers work if I push 1 before I dial area code, recieving calls is no problem.
Data/MMS don't work. I have noticed that I don't have the option of changing APN's, but there are 3rd party apps on play store that do allow you to input APN's. I'm about to reflash cm10.2, and backup the APN's to sdcard, then flash v20 on (after it's done downloading), and see if I can restore the APN's that way.
Interested in the result
Sent from my SPH-L720 using XDA Premium 4 mobile app
Q&A for [ROM] [4.4.4] [VS980] ParanoidAndroid [10/10]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
To whom it may concern;
I'm new to the world of programming but have been in the android game since the original g1 with T-Mobile. I've been flashing custom roms and recoveries since then and I have also been doing some very basic coding. C++ and C# primarily. If you would like a beta tester to prevent more tedious and time consuming problems from arising prior to your updates I'm willing to test for you and if you'd think I could be of any programming assistance or would like to show me around the programming world I'd love to take you up on that. Pm me for my personal email if you'd like and I'll get back to you ASAP.
Sincerely,
Mike J.
New to G2...flashed beta-3 and lost VZW LTE/3G data
I recently upgraded from VZW gnex to the LG G2 (bought off swappa). It was rooted already but running stock, and I'm used to AOSP, so I decided to go with Paranoid Android Beta-3. Long story short, I was having issues with LTE so I flashed the latest build (beta 5) and it got stuck in a boot loop. I was able to get back into recovery (TWRP 2.8.0.1) and restore nandroid backup, but when I booted I could no longer get verizon LTE or 3G data. Wifi connected fine, and calls/SMS go fine...just no mobile data. It does connect to "eHRPD" though, which doesn't have any data access.
Things I've tried:
1. Flashing a new bootstack. Tried 12A, 12B, 24A, 25A, 25B, 26A. No data with any of them
2. Flashing a new ROM (Tried Spirit ROM, which flashed fine but no data, and CM11, which went into a bootloop)
3. Calling *228 for a reset
4. Wiping the whole ROM and reflashing the same ROM and Gapps
5. Also tried setting APN as shown on a few websites. But as soon as I hit "Save" the modified APNs disappeared off the list.
Does anyone have any experience with losing LTE/3G like this? Luckily I have my old phone still so I just pop my SIM card back into it and it connects to data fine.
Updates
I am currently running the 10/25 build. When it comes to updates, do I want to flash over my current with the newer? Or is there a different process?
rpc:s-7:aec-0 after flash last night.
I'm getting the [rpc:s-7:aec-0] info from server error on my vs980 since i flashed last night. I flashed 26A, then PA, and then PA micro gapps.
this morning I did a full wipe and clean reinstall of PA, and I tried using the pico Gapps instead of the micro build. same result.
tried clearing google related app data, no fix. any ideas?
to the user with the apn problem, I had to set the apn 3 times before it saved
Love the ROM, great work. Was wondering how I would get Tmobile wifi calling option on this? I'm using the verizon vs980 version. Thanks
What about JDI pannel? PA kernel support JDI panel type?
ZBBfan3092 said:
I recently upgraded from VZW gnex to the LG G2 (bought off swappa). It was rooted already but running stock, and I'm used to AOSP, so I decided to go with Paranoid Android Beta-3. Long story short, I was having issues with LTE so I flashed the latest build (beta 5) and it got stuck in a boot loop. I was able to get back into recovery (TWRP 2.8.0.1) and restore nandroid backup, but when I booted I could no longer get verizon LTE or 3G data. Wifi connected fine, and calls/SMS go fine...just no mobile data. It does connect to "eHRPD" though, which doesn't have any data access.
Things I've tried:
1. Flashing a new bootstack. Tried 12A, 12B, 24A, 25A, 25B, 26A. No data with any of them
2. Flashing a new ROM (Tried Spirit ROM, which flashed fine but no data, and CM11, which went into a bootloop)
3. Calling *228 for a reset
4. Wiping the whole ROM and reflashing the same ROM and Gapps
5. Also tried setting APN as shown on a few websites. But as soon as I hit "Save" the modified APNs disappeared off the list.
Does anyone have any experience with losing LTE/3G like this? Luckily I have my old phone still so I just pop my SIM card back into it and it connects to data fine.
Click to expand...
Click to collapse
I'm having the EXACT same problem.
fndfd
广东省给多少个大概代购复古风格
any idea why my vs980 loses signal when i connect it to wifi, or reboot? running paranoid android custom rom, and even when i'm on stock, this happens???
---------------
Admin Note: this thread has a dedicated questions and answers section which you can access here -->.
Sent from my LG-VS980 using XDA Free mobile app
I was running stock 5.1.1 as my daily driver, installed multirom, installed chroma/blisspop/droidkang and a CM nightly, logged into each, just looking around, and now LTE doesn't work on my stock ROM or chroma.
I get the triangle with exclaimation point for signal.
Seems to work fine with CM and blisspop.
Anyone know what could cause this or how to fix it?
wtfdroidlol said:
I was running stock 5.1.1 as my daily driver, installed multirom, installed chroma/blisspop/droidkang and a CM nightly, logged into each, just looking around, and now LTE doesn't work on my stock ROM or chroma.
I get the triangle with exclaimation point for signal.
Seems to work fine with CM and blisspop.
Anyone know what could cause this or how to fix it?
Click to expand...
Click to collapse
Check to see if your APN is correct.
Resetting APN settings didn't change anything and the settings appear the same between stock and CM based roms.
did you go into cellular networks and see if lte/cdma is the prefered network over global
Yes, LTE preferred.
Due to the request of various members I have started a topic here for the rom for the xt1096 verizon model with android 6.0 marshmallow. This rom was developed by @hutchjim using the xt1097 marshmallow as a base.
Installation:
To install the rom, flash the zip from a custom recovery such as TWRP/CWM/etc.
Root:
To root this rom @donslade has stated that the files for the XT1095 work for it. They can be found here: http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Known issues:
None as of now.
Downloads:
Current version
Custom rom with new build.prop by yahya1054:
Download
AGISCI said:
Due to the request of various members I have started a topic here for the rom for the xt1096 verizon model with android 6.0 marshmallow. This rom was developed by @hutchjim using the xt1097 marshmallow as a base.
Installation:
To install the rom, flash the zip from a custom recovery such as TWRP/CWM/etc.
Root:
To root this rom @donslade has stated that the files for the XT1095 work for it. They can be found here: http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Known issues:
Some people are experiencing an issue where it says they are roaming.
Downloads:
Main download
Mirror 1
Click to expand...
Click to collapse
What the difference between this rom and 1095 MM Rom
kaktusmaier125 said:
What the difference between this rom and 1095 MM Rom
Click to expand...
Click to collapse
This one has support for verizon cdma. It is only useful for people who use verizon service.
Sent from my XT1095 using Tapatalk
AGISCI - Thanks for creating this thread. I hope we will have participation from folks who will test and provide feedback. I also hope that hutchjim will also provide info on how this ROM was created and what changes he made.
I believe the ROM is debloated from most of the Verizon apps and installs TWRP 2.8.7 as recovery. All of the Motorola Apps are there and function as expected from my experience. My phone connected to Verizon for voice and data. I do not know what other changes were made.
My experience to date has been mostly positive with just a few issues. I'll list those in a message a bit later. For now here is my interpretation of hutchjim's installation instructions:
1. Perform factory reset/wipe. THIS WILL WIPE YOUR PHONE AND ALL DATA ON IT. Either the built in reset/wipe of using TWRP. I used TWRP 3
2. Flash ROM
3. Perform another reset/wipe. I used TWRP 3
4. Phone will boot to initial setup. Follow prompts. Hutchjim says not to setup wifi during this phase but I see no way to avoid that. I connected to my home wifi at this point and continued setup.
5. As soon as you can go into Settings go to Cellular Networks > CDMA and select RUIM. No other changes should be made in the Cellular settings. You can also go to Backup & Reset > Reset Network Settings and reset there. Verify that the CDMA > RUIM setting is still selected.
6. Reboot and verify network settings.
7. Continue setup/restore from previous backup from Google. Any apps that need updating for MM will do so during the restore.
Doing the above results in a phone running 6.0.1 which identifies itself as a XT1097. I'll post a screen shot of the ABOUT phone screens later.
To root I used the files from here:http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Flash using TWRP
1. root-boot-6.0-xt1095.zip
2. UPDATE-SuperSU-2.65.zip (there might be a newer one out there but this one worked for me. It should update later if needed)
After this I was able to install the latest Exposed framework and app, Gravity MM, XGELS and AOSPSignal icons modules with no problems.
I had been using this ROM with no real issues since last Friday. Legacystar reported that his phone was Roaming after he installed the ROM. Mine was not Roaming worked great - until this morning when it went into Roaming a couple of hours ago. Nothing I did could make it change back. I restored a backup of this ROM from Saturday but the phone is still Roaming. I've now gone back to my last 5.0 backup and will try to reinstall the ROM later when am back home. Will update then.
Here is a list of items I think we need more info on:
1. What was the base ROM for this? I think it is XT1097 based but it may be XT1095 since the XT1095 root files work.
2. What changes were made to get this to work wit the XT1096 radio and allow CDMA operation?
3. How do the Cellular settings work and how can they be improved for this ROM?
4. How to bypass the network setup screen during initial MM setup?
Hope this helps. I'll update more after work and when I reinstall the ROM. Until then I hope more testers chime in with their experiences.
Don Slade
donslade said:
AGISCI - Thanks for creating this thread. I hope we will have participation from folks who will test and provide feedback. I also hope that hutchjim will also provide info on how this ROM was created and what changes he made.
I believe the ROM is debloated from most of the Verizon apps and installs TWRP 2.8.7 as recovery. All of the Motorola Apps are there and function as expected from my experience. My phone connected to Verizon for voice and data. I do not know what other changes were made.
My experience to date has been mostly positive with just a few issues. I'll list those in a message a bit later. For now here is my interpretation of hutchjim's installation instructions:
1. Perform factory reset/wipe. THIS WILL WIPE YOUR PHONE AND ALL DATA ON IT. Either the built in reset/wipe of using TWRP. I used TWRP 3
2. Flash ROM
3. Perform another reset/wipe. I used TWRP 3
4. Phone will boot to initial setup. Follow prompts. Hutchjim says not to setup wifi during this phase but I see no way to avoid that. I connected to my home wifi at this point and continued setup.
5. As soon as you can go into Settings go to Cellular Networks > CDMA and select RUIM. No other changes should be made in the Cellular settings. You can also go to Backup & Reset > Reset Network Settings and reset there. Verify that the CDMA > RUIM setting is still selected.
6. Reboot and verify network settings.
7. Continue setup/restore from previous backup from Google. Any apps that need updating for MM will do so during the restore.
Doing the above results in a phone running 6.0.1 which identifies itself as a XT1097. I'll post a screen shot of the ABOUT phone screens later.
To root I used the files from here:http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Flash using TWRP
1. root-boot-6.0-xt1095.zip
2. UPDATE-SuperSU-2.65.zip (there might be a newer one out there but this one worked for me. It should update later if needed)
After this I was able to install the latest Exposed framework and app, Gravity MM, XGELS and AOSPSignal icons modules with no problems.
I had been using this ROM with no real issues since last Friday. Legacystar reported that his phone was Roaming after he installed the ROM. Mine was not Roaming worked great - until this morning when it went into Roaming a couple of hours ago. Nothing I did could make it change back. I restored a backup of this ROM from Saturday but the phone is still Roaming. I've now gone back to my last 5.0 backup and will try to reinstall the ROM later when am back home. Will update then.
Here is a list of items I think we need more info on:
1. What was the base ROM for this? I think it is XT1097 based but it may be XT1095 since the XT1095 root files work.
2. What changes were made to get this to work wit the XT1096 radio and allow CDMA operation?
3. How do the Cellular settings work and how can they be improved for this ROM?
4. How to bypass the network setup screen during initial MM setup?
Hope this helps. I'll update more after work and when I reinstall the ROM. Until then I hope more testers chime in with their experiences.
Don Slade
Click to expand...
Click to collapse
1) It is based on xt1097, specifically on retla which is the retail latin america variant. I am not surprised that the root files for xt1095 work since the xt1097 and xt1095 are extremely similar.
2) He sent me a list of some of the changes, I will dig through the files modified to get more details on what changed.
I was sent a new version by @hutchjim, it is uploading to google drive now. Hopefully in the new version the roaming problem is fixed.
Sent from my XT1095 using Tapatalk
Thanks for the update. I had notice that it did say retla in the system version. Need to pay attention to the baseband info.. Based on that I don't need to upload the About Phone screens then.
Very excited for this. Do gapps need to be flashed as well?
Sent from my XT1096 using Tapatalk
RamAir02 said:
Very excited for this. Do gapps need to be flashed as well?
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
It's a stock rom, gapps are in it already.
Sent from my XT1095 using Tapatalk
AGISCI said:
1) It is based on xt1097, specifically on retla which is the retail latin america variant. I am not surprised that the root files for xt1095 work since the xt1097 and xt1095 are extremely similar.
2) He sent me a list of some of the changes, I will dig through the files modified to get more details on what changed.
I was sent a new version by @hutchjim, it is uploading to google drive now. Hopefully in the new version the roaming problem is fixed.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
has this new version been uploaded yet?
Legacystar said:
has this new version been uploaded yet?
Click to expand...
Click to collapse
It's uploading right now, for some reason my connection is super slow today. I will post as soon as it's done uploading.
Sent from my XT1095 using Tapatalk
AGISCI said:
It's uploading right now, for some reason my connection is super slow today. I will post as soon as it's done uploading.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
awesome, thank you. any idea what he did to fix the roaming issue?
Legacystar said:
awesome, thank you. any idea what he did to fix the roaming issue?
Click to expand...
Click to collapse
He said he added a verizon app in priv-apps.
Sent from my XT1095 using Tapatalk
AGISCI said:
He said he added a verizon app in priv-apps.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
might have been the verizon apn app
Alright, sorry for the long delay. My internet is messed up right now. I started the upload last night and left it running. I woke up to a failed upload message. I started it again and it took 5 hours to upload... anyway, I have updated the first post with the link to the new version. Please try it out and let us know if you have issues with roaming still.
I have had the roaming issue since I installed the original MM posted a few days ago but even though the R is showing by 4g it still allows me to access data through 4g. Hope I am not going to incur the financial wrath of big red. lol. I was reading this forum using it. Anyway, I want to say thanks for those putting in the work to try and figure this out and support a stock MM rom for the xt1096. I will test the new version as soon as I get it downloaded and report back if the roaming issue persists for me.
I have updated to the latest version of stock MM offered on first post and can confirm that the R roaming symbol is gone. I have rebooted several times and finished setting my phone up how I want it. The only issue I had during the process of installing and setting up this version of MM is that upon rebooting the first 2 times I had a pop up saying "Unfortunately, Verizon Login has stopped."
I rebooted into twrp and installed reinstalled the root and su zips and upon reboot the pop up went away. I guess I was wrong to assume that the order for installing the zips were 1)root boot for 1095, 2)Super SU and 3) MM Rom. After reading that in order it makes more sense to load the Rom then the root and su zips. Oh well, all is well that ends well.
Has anyone figured out how to bypass the wifi setup screen during setup?
Wrong forum.
i just loaded the new version and still getting the roaming. also having the verizon app crash on startup.
To skip WiFi setup, put sim card in on welcome screen so after boot put sim,
also roaming is gone for me but I just get data, no voice on some reboots voice aval even when it says out of service same last build.
Roaming was an issue older build new build fixed, voice still wonky for me
I currently use the SM-817W version and using the following get root:
Flashed stock Android 6 image
Flash twrp_3.0.2-1_sm-t810.tar using latest Odin
Flash latest SuperSU sytemless
Boom everything works (lte, wifi, sound, camera)
Here are my questions:
Using the same recovery it lets me flash any 810 roms and they work fine (even Nougat versions) except the LTE since the 810 is a wifi only tablet. I see no problem here.
Now I flashed TWRP_3.0.0-1_sm-t815.tar so it would let me flash 815 roms that have LTE. Every rom I flash does not detect the SIM card. Just says it is not inserted. I can obviously get back to my initial setup and have everything work, but would love to use Android 7 on this thing.
Does anyone have any ideas on what I can possibly do to get SIM working?