Finally Service roms for Emui 8 provided by Huawei . Only for EU models - C432
Same Service roms could be used for upgrade from Emui 5 to Emui 8, and its a new possibility.
But please be careful for upgrading from emui 5 to emui 8 you should be on the latest builds c432B209 or c432B210, otherwise you will brick your phone!!! And... use force method for dload, otherwise if you use normal upgrade or select wrong files you will get wrong build 8.0.0.046(0BUG)!!! If you dont read this instruction as usualy and got wrong build just repeat procedure but now with emui 8-emui 8 ziped files and of course suitable files for your model.
Instructions are not so easy, so before you do anything, please read carefully Software Upgrade Guideline approved by Huawei.
My strongly recommendation is forced method with three buttons for unbrick, or rollback from custom roms, fix frp accidently locked, for locking bootloader, for upgrade from Emui 5- Emui 8 using dload method. With this roms you will get full stock firmware with locked bootloader and your warranty will not void any more!
Before you perform dload forced method with three buttons please make a backup using one of many solutions such as HiSuite, HiCloud, PhoneClone, Backup on SD, etc. Because forced method wipe all data on internal storage including photos,music, videos, apps, etc.
Remember:
LX mark "X" means 1 or 2
1- single sim (one Imei) , 2-dual sim (two Imeis, or converted models in some cases with oeminfo for dual sim)
Letter A- means 4gb models
L01- 3GB Single Sim
L21 - 3GB Dual Sim
L21A - 4GB Dual sim
L01A- 4GB Single Sim
For Emui 8 - Emui 8 upgrade, or unbrick, rollback from custom rom on Emui 8
On SD card put follow folder and subfolder depend of your model
└─dload
│└─WAS-L01_hw_eu
│└─update_sd_ WAS-L01_hw_eu.zip
│└─WAS-L01A_hw_eu
│└─update_sd_ WAS-L01A_hw_eu.zip
│└─WAS-L21_hw_eu
│└─update_sd_ WAS-L21_hw_eu.zip
│└─WAS-L21A_hw_eu
│└─update_sd_ WAS-L21A_hw_eu.zip
├─update_sd.zip
For example: I have dual sim , 3 gb model.... so I will create dload folder on SD and inside of dload place file update_sd.zip
and subfolder WAS-L21_hw_eu and in that subfolder put update_sd_ WAS-L21_hw_eu.zip, like this
└─dload
│└─WAS-L21_hw_eu
│└─update_sd_ WAS-L21_hw_eu.zip
├─update_sd.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For Emui 5 - Emui 8 upgrade, or unbrick
On SD card put follow folder and subfolder depend of your model
└─dload
│└─WAS-L01_hw_eu
│└─update_sd_ WAS-L01_hw_eu.zip
│└─WAS-L01A_hw_eu
│└─update_sd_ WAS-L01A_hw_eu.zip
│└─WAS-L21_hw_eu
│└─update_sd_ WAS-L21_hw_eu.zip
│└─WAS-L21A_hw_eu
│└─update_sd_ WAS-L21A_hw_eu.zip
├─update_sd.zip
Very important step for Emui 5 - Emui 8 ----You should unzip, for example for my model dual sim, 3GB,.... the update_sd.zip、update_sd_ WAS-L21_hw_eu.zip file, and get out UPDATE.APP to do upgrade operation, the file list as below:
└─dload
│└─WAS-L21_hw_eu
│└─update _ WAS-L21_hw_eu.app
├─update.app
B378 Emui 8 Service rom (C432) for LX1A dual sim 4Gb (only for upgrade or unbrick emui 8- emui 8)---GPU TURBO ????
{Mod edit: Link removed}
B378 Emui 8 Service rom (C432) for LX1 dual sim 3Gb (only for upgrade or unbrick emui 8- emui 8)---GPU TURBO ????
{Mod edit: Link removed}
B373 Emui 8 Service rom (C432) for LX1 single sim 3Gb (only for upgrade or unbrick emui 8- emui 8)---GPU TURBO ????
{Mod edit: Link removed}
B373 Emui 8 Service rom (C432) for LX1A single sim 4Gb (only for upgrade or unbrick emui 8- emui 8)---GPU TURBO ????
{Mod edit: Link removed}
B376 Emui 8 Service rom (C432) for LX1 dual sim 3Gb (only for upgrade or unbrick emui 8- emui 8)
{Mod edit: Link removed}
B371 Emui 8 Service rom (C432) for L01A single sim 4Gb (only for upgrade or unbrick emui 8- emui 8)
{Mod edit: Link removed}
B371 Emui 8 Service rom (C432) for L01 single sim 3Gb (only for upgrade or unbrick emui 8- emui 8)
{Mod edit: Link removed}
B370 Emui 8 Service rom (C432) for LX1 dual sim 3Gb (Upgrade or unbrick emui 8- emui 8, emui 5-emui 8)
{Mod edit: Link removed}
B370 Emui 8 Service rom (C432) for LX1A dual sim 4Gb (Upgrade or unbrick emui 8- emui 8, emui 5-emui 8)
{Mod edit: Link removed}
B367 Emui 8 Service rom (C432) for single sim (Upgrade or unbrick emui 8- emui 8, emui 5-emui 8)
{Mod edit: Link removed}
B366 Emui 8 Service rom (C432) - approved for WAS-LX1A but it can be used for LX1 too. (Upgrade or unbrick emui 8- emui 8, emui 5-emui 8)
{Mod edit: Link removed}
B364 Emui 8 Service rom (C432) for Dual sim-google approved for WAS-LX1A (Upgrade or unbrick emui 8- emui 8, emui 5-emui 8)
{Mod edit: Link removed}
B362 Emui 8 Service rom (C432) for Dual sim-google approved for DS models (Upgrade or unbrick emui 8- emui 8, emui 5-emui 8)
{Mod edit: Link removed}
B361 Emui 8 Service rom (C432) for Single sim-google approved for SS models (Upgrade or unbrick emui 8- emui 8, emui 5-emui 8)
{Mod edit: Link removed}
Note:Sever is not so fast, so during downloading be patient.
One example how you can use Service rom on Emui 8 when FRP accidently locked, oem disabled and rollback to stock and lock bootloader.
Regards
Thank you for your work
KRALJU , HVALA TI !!! :good:
Thank you so much. Hvala ti brate.Mada,malo ti je nejasno objasnjenje,dali idu zipovani fajlovi,ili se i iz nih vade fajlovi i koji?Pogotovu je nejasno,za postupak prelaska sa EMUI 5 na 8.
SUPERB !!! 30% Faster work !
mugy said:
Thank you so much. Hvala ti brate.Mada,malo ti je nejasno objasnjenje,dali idu zipovani fajlovi,ili se i iz nih vade fajlovi i koji?
Click to expand...
Click to collapse
Pozdrav drug! Just read carefully Software Upgrade Guideline.
Basically, zip files are going for dload on emui 8.
Files with extension app are going for dload on emui 5.
If I catch some time I will make tutorial.
Or if someone have a little more time to do that it will be appreciate.
Regards,
Alexxxx1 said:
Pozdrav drug! Just read carefully Software Upgrade Guideline.
Basically, zip files are going for dload on emui 8.
Files with extension app are going for dload on emui 5.
If I catch some time I will make tutorial.
Or if someone have a little more time to do that it will be appreciate.
Regards,
Click to expand...
Click to collapse
Thank you.Kreten nije procitao tutorijal.Everyting is OK,now.
I did it without a mistake, just read the instructions! Everything is well explained and supported by the pictures!
It is not difficult to follow the instructions!
Also with service rom your bootloader will be locked again, and warranty will not void any more.
I had relocked bootloader because earlier I used HWOTA method. After service rom my bootloader goes from relocked again in locked.
Hello there, I have a simple question.
I read the instructions but one thing is not clear to me. I have dual SIM LX1 model, and I am currently on B210.
Which one of these service roms do I choose, I mean 361 or 362, or it doesn't matter?
Thanks.
Hvala brate
pujolsk said:
Hello there, I have a simple question.
I read the instructions but one thing is not clear to me. I have dual SIM LX1 model, and I am currently on B210.
Which one of these service roms do I choose, I mean 361 or 362, or it doesn't matter?
Thanks.
Hvala brate
Click to expand...
Click to collapse
It doesnt matter. But for Serbia you can use B361 because in b362 there is fix for VoLte. Everything rest is same.
From Emui 8 there is no rule for SS or DS and build number like on Emui 5.
Regards
Poslato sa WAS-LX1 uz pomoć Tapatoka
will after the update get normal updates? i mean OTA updates?
PoLiThS said:
will after the update get normal updates? i mean OTA updates?
Click to expand...
Click to collapse
Of course.
Poslato sa WAS-LX1 uz pomoć Tapatoka
If I upgrade by this method I will not lose the warranty?
danut11 said:
If I upgrade by this method I will not lose the warranty?
Click to expand...
Click to collapse
Please read first post, I already mentioned that.
Poslato sa WAS-LX1 uz pomoć Tapatoka
danut11 said:
If I upgrade by this method I will not lose the warranty?
Click to expand...
Click to collapse
No, you wont, this is official service ROM from Huawei (as stated in the post).
In the matter of fact you should flash this in order to gain your warranty again (if void before).
Cheers
---------- Post added at 11:10 AM ---------- Previous post was at 11:08 AM ----------
Alexxxx1 said:
It doesnt matter. But for Serbia you can use B361 because in b362 there is fix for VoLte. Everything rest is same.
From Emui 8 there is no rule for SS or DS and build number like on Emui 5.
Regards
Poslato sa WAS-LX1 uz pomoć Tapatoka
Click to expand...
Click to collapse
Thanks again, downloading right now.
All the best and greeting from Trebinje.
Alexxxx1 said:
Please read first post, I already mentioned that.
Poslato sa WAS-LX1 uz pomoć Tapatoka
Click to expand...
Click to collapse
woohoooo! Booting on OREO as we speaking right now
Thank you for this post.
One question - can I upgrade to this straight from B184, or I need to get B210 first?
On my phone it states build number System 8.0.0.046(0BUG)
But i didnt do forced update... maybe thats the cause... all my data was kept at the phone...
btw i installed B361
PoLiThS said:
On my phone it states build number System 8.0.0.046(0BUG)
But i didnt do forced update... maybe thats the cause... all my data was kept at the phone...
btw i installed B361
Click to expand...
Click to collapse
No, u dont follow instrucyion. You've selected wrong model L01, L21.... which one.... or something else. Also I recomened forced method.... So...... Sorry, but must tell us full info about your phone, 3gb, dual, region, etc
With that build 046 u stuck there and no any more Ota if you dont repeat correct procedure.
Poslato sa WAS-LX1 uz pomoć Tapatoka
Related
Since I was kind of not happy with the official Android 6.0 (B550) as it did have (again!) the so called "double-tap-keyboard" bug I've decided to make a rollback to B190 (as it does not have this bug - details about the bug here -> http://forum.xda-developers.com/p8lite/general/double-tap-problem-keyboards-firmware-t3343287). Procedure to follow is the same I did with BETA so if you follow the below short guide you should get back (if you want) quite safely to Lollipop.
Please carefully follow the instructions. If you do not understand or are not sure what to do - DO NOT DO ANYTHING - just don't make downgrade.
It applies for sure to B524 BETA 6.0 and B550 Official 6.0 (available in Europe) :
1. Download : http://consumer.huawei.com/pl/suppo...0=Mobile Phones&key1=Smartphones&key2=ALE-L21
2. Extract 1.zip package and go to the first folder ( .\1\ALE-L21 Northeast Europe Channel Rollback upgrade package for ALE-L21C432B524\01 xbl(Downgrade Downgrade Packages) )
3. Copy folder "dload" to the internal memory (probably you may want to use microSD card however I used internal memory)
4. Make BACKUP!
5. Make sure you have backup!
6. Turn off the mobile.
7. Turn on the mobile by pressing all three keys : vol+, vol-, power button (device SHOULD NOT be connected to PC)
8. Wait untill transition package finishes (takes c/a 3 minutes).
9. You will end up with Build ALE-L21C432B300 (transition build). This should not be used on daily basis as it is ONLY for getting back to Lollipop (see official Huawei materials for details)
10. Delete the contents of "dload" folder in your phones internal memory.
11. Download B190 (or B170 - may also work with others but these two were tested) : http://download-c.huawei.com/download/downloadCenter?downloadId=72585&version=256613&siteCode=de
11. Extract the downloaded archive - open it and copy the "dload" folder with B190 firmware (2,8GB uncompressed!) to the phones internal memory.
12. Turn off mobile.
13. Turn on the mobile by pressing again all three keys : vol+, vol-, power button (device SHOULD NOT be connected to PC)
14. May take couple of minutes (5-10) as the whole firmware gets installed.
15. The device will be automatically rebooted and all user-data will be removed.
16. Enjoy your downgraded firmware
You can install the official update if you be on build (all info is in the pdf in the zip of the update)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G900M using XDA-Developers mobile app
how to do this on version b525 ?
Downgrade to single build B052 by fastboot and after directly with the native updater install vendor< B170<B188 and B550(in a dload folder's at root on your internal or external sd)
You can directly jump to B550 since B170.B188.is only a ota update.
Only way without any trouble.
It's because B525 is single sim variant firmware.
This B550 official update is for dual.
But you can use this on your single and use the second sim if you want or ext-sd like now.
If you want help and links pm me.
Also unlock bootloader is need.
Sent from my ALE-L21 using XDA-Developers mobile app
dkonect said:
You can install the official update if you be on build (all info is in the pdf in the zip of the update)
Sent from my SM-G900M using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, I know.
I thought that since I figured out that this "simple" procedure works fine also for Official B550 - anyone that would want to downgrade can follow.
Obviously - after the downgrade it is possible to make an upgrade again at any time.
I am from greece with branded vodafone 5.1.1 CO2B181 and i want to do the p8 lite dual sim and flash the android 6. Please tell me the method...thank u
hi can you help me to get link to b188? or b194 (dual sim.)
my previous version before b550 was b194, if i decide to roolback to b194 again, the roolback process is the same? just update the roolback upgrade and then donwgrade to b194 or b188?
i think i found something and correct me ir i wrong,, since b188 or 194 is an OTA package, my device needs to be running B170 i am right?
http://forum.xda-developers.com/p8lite/general/official-rom-p8-lite-ale-l21-c40b181-t3297559/page8
http://www.carbontesla.com/2016/02/download-huawei-p8-lite-b188-lollipop-ota-zip-europe/
pl4t!n said:
hi can you help me to get link to b188? or b194 (dual sim.)
my previous version before b550 was b194, if i decide to roolback to b194 again, the roolback process is the same? just update the roolback upgrade and then donwgrade to b194 or b188?
i think i found something and correct me ir i wrong,, since b188 or 194 is an OTA package, my device needs to be running B170 i am right?
http://forum.xda-developers.com/p8lite/general/official-rom-p8-lite-ale-l21-c40b181-t3297559/page8
http://www.carbontesla.com/2016/02/download-huawei-p8-lite-b188-lollipop-ota-zip-europe/
Click to expand...
Click to collapse
In order to make a downgrade you need to download the full (this 1,5GB+) firmware (be it B170 or B190 as I tested). Having a small OTA patch only would not be enough.
But anyway - once you flash B300 transition package on Android 6.0 and then flash B170 you should be able to get an OTA with the rest (if not - you can always flash newer ones through Local Update).
Ok, but do I need to apply rollback upgradr or I just need downgrade b170 .
Enviado do meu ALE-L21 através de Tapatalk
pl4t!n said:
Ok, but do I need to apply rollback upgradr or I just need downgrade b170 .
Enviado do meu ALE-L21 através de Tapatalk
Click to expand...
Click to collapse
If you are downgrading from Android 6.0, first you need to apply the B300 transition package and THEN B170 or B190 full package (see the howto in my first post for details).
Ok thanks for all support
Enviado do meu ALE-L21 através de Tapatalk
Hello, want them back Android 6.0 (B551) to Android 5.0 (B171)? Where to find B301? Please reply me. Thank You!
Hi, I'm on b551 with balong bug. At first I've c02b181. I can't downgrade because when I update There Is error and update fail. I can only flash the same update b551. The only way to downgrade is fastboot?
Inviato dal mio ALE-L21 utilizzando Tapatalk
Google "p8 lite myphone greece". To the last pages i had describe how
Rollback MM 6 to Ll 5
Hi
http://download-c.huawei.com/download/downloadCenter?downloadId=79350&version=317019&siteCode=es
Bye
How to Rollback from Official Android 6.0 (C636B530) to Android 5.xx P8 lite ALE L02
The rom support just Germany SIM cards? Or european sim cards? Because on download it says ... bla bla bla .... .....-germany.zip
Thanks
---------- Post added at 09:47 PM ---------- Previous post was at 09:42 PM ----------
P.S. First 100 mb link doesn't work. It says prezeprapny bla bla mozna zalenzc bla bla bla
file015 said:
How to Rollback from Official Android 6.0 (C636B530) to Android 5.xx P8 lite ALE L02
Click to expand...
Click to collapse
You'll be needing a rollback package ( a transition rom) , then from there you can head to any lollipop build...
Download this rollback package
Now extract it and you'll get a folder named dload or just update.app file (~200mb - 300mb). If its later, put the update.app file in a folder named dload and copy it to the root of the sd card. Dial *#*#2846579#*#*, a context menu will appear and select SDCard Upgrade, the phone will restart and upgrade.
By doing this, you'll get into the transition rom.
After that download your required firmware (b190 or b170), extract that and do as you did earlier with the transition package..
Done
Hello,
I was hoping someone could help me select the most relevant nougat beta update for my P9. I really want to get on to android 7.0 asap and my current build number is:
EVA-L09C432B182
I cannot find any matching build numbers on the beta update list. Would anyone know if this is required to match perfectly or is there a version I could download. Any help would be greatly appreciated.
Thank you
gordodevlin said:
Hello,
I was hoping someone could help me select the most relevant nougat beta update for my P9. I really want to get on to android 7.0 asap and my current build number is:
EVA-L09C432B182
I cannot find any matching build numbers on the beta update list. Would anyone know if this is required to match perfectly or is there a version I could download. Any help would be greatly appreciated.
Thank you
Click to expand...
Click to collapse
Update to Nougat B360/B361 using Huawei Updater
Only works on B182 or B360/B361
- Only works CUST 432
- Only works EVA-L09 Single SIM
- Only works Unrooted devices and locked bootloader
C432B360
Custom ROM Version: EVA-L09C432B360
Custom ROM URL: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v71496/f1/
C432B361
Custom ROM Version: EVA-L09C432B361
Custom ROM URL: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73574/f1/
C432B378
Custom ROM Version: EVA-L09C432B378
Custom ROM URL: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v75049/f1/ (WARNING: Recommended update to B361 and update to B378 via OTA)
1. Install Huawei HiSuite
2. Download Huawei Updater 2.0
3. Connect phone to PC, open HiSuite y established connection Hisuite <--> Phone (minimize HiSuite window)
--> Not connect?, touch "Settings - Advanced Settings -> Security" and enable "Allow HiSuite HDB"
4. Run Huawei Updater, chek the box "Custom ROM" and "Custom Port"
5. In box "Custom ROM Version" enter correct ROM version for flashing (example: EVA-L09C432B361)
6. In box "Custom ROM URL" enter correct ROM URL version for flashing (example: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73574/f1/)
7. Click on "Start" button and accept waiting alert messages
8. Maximize HiSuite windows, touch on "Settings" --> "General" --> Custom Proxy and configure using:
Address: 127.0.0.1
Port: 41279
9. Back to main HiSuite windows and click on "System update"
10. Press "Update" and wait download firmware. This smartphone reboot and start upgrade!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KrAzYtHeBoY said:
Update to Nougat B360/B361 using Huawei Updater
Only works on B182 or B360
- Only works CUST 432
- Only works EVA-L09 Single SIM
C432B360
Custom ROM Version: EVA-L09C432B360
Custom ROM URL: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v71496/f1/
C432B361
Custom ROM Version: EVA-L09C432B361
Custom ROM URL: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73574/f1/
1. Install Huawei HiSuite
2. Download Huawei Updater 2.0
3. Connect phone to PC, open HiSuite y established connection Hisuite <--> Phone (minimize HiSuite window)
--> Not connect?, touch "Settings - Advanced Settings -> Security" and enable "Allow HiSuite HDB"
4. Run Huawei Updater, chek the box "Custom ROM" and "Custom Port"
5. In box "Custom ROM Version" enter correct ROM version for flashing (example: EVA-L09C432B361)
6. In box "Custom ROM URL" enter correct ROM URL version for flashing (example: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73574/f1/)
7. Click on "Start" button and accept waiting alert messages
8. Maximize HiSuite windows, touch on "Settings" --> "General" --> Custom Proxy and configure using:
Address: 127.0.0.1
Port: 41279
9. Back to main HiSuite windows and click on "System update"
10. Press "Update" and wait download firmware. This smartphone reboot and start upgrade!
Click to expand...
Click to collapse
sorry for question, works on L09C900B182?
many many thanks
lelez84 said:
sorry for question, works on L09C900B182?
many many thanks
Click to expand...
Click to collapse
Find B360/B361 full Custom ROM URL in this post
https://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586
and enter the values for C900
this correct ROM URL ended in "/f1/" not in "/f1/full/update.zip"
KrAzYtHeBoY said:
Find B360/B361 full Custom ROM URL in this post
https://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586
and enter the values for C900
Click to expand...
Click to collapse
Thank you very much but i think that i don't understand
lelez84 said:
Thank you very much but i think that i don't understand
Click to expand...
Click to collapse
You need "Custom ROM Version" and "Custom ROM URL" for C900.
I do not know where to find them for your version
I think for cust c900 it did not come out yet
KrAzYtHeBoY said:
You need "Custom ROM Version" and "Custom ROM URL" for C900.
I do not know where to find them for your version
I think for cust c900 it did not come out yet
Click to expand...
Click to collapse
ok
thank you perfect!
You are legend man. Where was this tut. that i miss it?
Does anyone tried with L-19C432B182 ???
Sent from my EVA-L19 using XDA-Developers Legacy app
richish said:
Does anyone tried with L-19C432B182 ???
Sent from my EVA-L19 using XDA-Developers Legacy app
Click to expand...
Click to collapse
The op specifically said this: - Only works EVA-L09 Single SIM
So no, I'd rather not brick my L19 device with this^
gordodevlin said:
Hello,
I was hoping someone could help me select the most relevant nougat beta update for my P9. I really want to get on to android 7.0 asap and my current build number is:
EVA-L09C432B182
I cannot find any matching build numbers on the beta update list. Would anyone know if this is required to match perfectly or is there a version I could download. Any help would be greatly appreciated.
Thank you
Click to expand...
Click to collapse
I installed the latest build that was released yesterday 1/16 on my P9 single sim (EVA-L09) via huawei firmware updater . Update from B182 to 361 went w/o any issues. New firmware is quite responsive, no complaints there.
rsync420 said:
I installed the latest build that was released yesterday 1/16 on my P9 single sim (EVA-L09) via huawei firmware updater . Update from B182 to 361 went w/o any issues. New firmware is quite responsive, no complaints there.
Click to expand...
Click to collapse
Was you already signed up for the beta?
oxfordmark said:
Was you already signed up for the beta?
Click to expand...
Click to collapse
No, never signed up for beta. This is my second Huawei phone that I ordered just a few days ago.
rsync420 said:
No, never signed up for beta. This is my second Huawei phone that I ordered just a few days ago.
Click to expand...
Click to collapse
That's interesting, I thought the update fails for phones that haven't been signed up for the beta.
Hello. I'm a total noob at this, but I read this forums a lot. I'd like to know if there's a way I can update my P9 to Nougat.
My device's software version is EVA-L09C212B141.
I'm in Latin America and there hasn't been a beta here yet. And there's no newer version for me via the EMUI update app on my phone either.
Is it possible for me to update to a newer version, and then install the latest version of Nougat on my phone?
Thanks in advance!
Hi
I've tried this but it downloaded to 99% then said failed and now it fails at 0%
Im on c432b360 can you please help
Thanks
John
THANK YOU! I finally managed to update c432b182 to c432B361 using this method.
I can confirm that B361 installed with no difficulties using this KrAzYtHeBoY's procedure.
Many, many thanks KrAzYtHeBoY!!! Well happy now!!!
Update: Build Number is showing as NRD90M test-keys. What's all that about does anyone know?!
Would this work over B322-log? Being abandoned by Huawei atm
amazing response, thank you.
I know the name of it is custom rom, does that mean it is not genuine Huawei firmware?, don't really want to mess with the potential warranty situation.
Thank you
Hi In this Guide I am going to show a way to update Emui 8.x to Emui 9.x using Firmware Finder
It can be used on locked and unlocked Bootloader.
Data mostly wont be erased but will be erased in some cases where stock system is tampered earlier.
It may or may not lock your Bootloader.
For this you need to install Firmware Finder app ( https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder ) on your device , original thread for the app ( https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146/ )
Note 1:
This method requires latest EMUI 8.X available for your device. If you are not on the latest update repeat the below steps to install latest EMUI 8.x for your device.
Note 2: This process is safe to proceed if you have selected correct firmware for your device , If you try to flash wrong firmware and bricked your device I wont be responsible for it.
Steps to Update :
1. Install Firmware Finder App ( https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder)
2. Select your Device in the App
3. Check the list of available firmwares
4. If you are not on the latest EMUI 8.x firmware then you need to install it
5. Select the next update iteration for your device
6. Check whether the update is approved your IMEI or not if check step 11 below
7. If the update is approved Get an update through eRecovery (Note that for this method you have to change DNS in your Router)
8. Click On Next and copy DNS address from the App
9. Change DNS in the Router and reboot your Router (Check whether DNS is configured properly or not by clicking this URL http://query.hicloud.com/checkConnect.action if you get 404 then its not configured properly)
10. Now click on the check availablitiy if not yet approved check next step
11. There is a option for Register update in the screen now click on register update and click next here your IP will be registered for sending the update
12. Now connect your device to charger and reboot into eRecovery by pressing Volume+ button
13. Once its rebooted cleck on the option Download latest version and recovery
14. On Next step Download and recovery
15. It will search for WiFi and will list the available WiFi , select the WiFi which you used to register your IP in step 11
16. It will proceed to download the select firmware once it done it will Reboot.
https://imgur.com/a/r28YKbx
https://imgur.com/a/MyL4Gew
Screenshots for the steps:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Repeat the process till you are on the latest version of EMUI 8.x once its done you can Install EMUI 9.x
If it helps Donate to Huawei Firmware Finder (Team MT) and Thank them.
If this steps are helpful thank and rate this thread.
For those who cant access their router try this guide.
https://forum.xda-developers.com/huawei-p20-pro/how-to/upgrade-to-android-pie-throught-t3884054
This is only going to work if the package in firmware is approved?
AsimRauf_44 said:
This is only going to work if the package in firmware is approved?
Click to expand...
Click to collapse
Check step 10 and 11 it can also be used for not approved packages.
miststudent2011 said:
Check step 10 and 11 it can also be used for not approved packages.
Click to expand...
Click to collapse
I am currently on 9.0 beta on Honor Play.
AsimRauf_44 said:
I am currently on 9.0 beta on Honor Play.
Click to expand...
Click to collapse
It supports only EMUI 8.x
miststudent2011 said:
It supports only EMUI 8.x
Click to expand...
Click to collapse
Okay.
Thank you
I'm on COR-L29 8.2.0.131, the battery usage on 130 is better than 131.
can i use this method to downgrade to 8.2.0.130 ?
or should i wait to upgrade to emui9 ??
xSairous said:
I'm on COR-L29 8.2.0.131, the battery usage on 130 is better than 131.
can i use this method to downgrade to 8.2.0.130 ?
or should i wait to upgrade to emui9 ??
Click to expand...
Click to collapse
For downgrade you need to use hisuite desktop app not this method.
which version i should download for cor-L29 C185GT?
Can i use this method to change region from c432 or c636 ? since in FF both c432, and c636 is approved for me
alijeddi said:
which version i should download for cor-L29 C185GT?
Click to expand...
Click to collapse
If you are confused to install which package just check the security patch month for the currently installed version and then check the next month security patch in the Firmware Finder and install it.
miststudent2011 said:
If you are confused to install which package just check the security patch month for the currently installed version and then check the next month security patch in the Firmware Finder and install it.
Click to expand...
Click to collapse
thanks for your answer. but i mean can i download CORE-L29 C185E1R1P9 firmware on CORE-L29 C185GT ?
thelazt16 said:
Can i use this method to change region from c432 or c636 ? since in FF both c432, and c636 is approved for me
Click to expand...
Click to collapse
Not sure, you may try at your own risk.
alijeddi said:
thanks for your answer. but i mean can i download CORE-L29 C185E1R1P9 firmware on CORE-L29 C185GT ?
Click to expand...
Click to collapse
No idea about the difference in firmware versions for your device model.
not work on honor play... i tested, i try 3 times, all try failed
firmware finder not support emui 8.2
Sent from my HUAWEI COR-L29 using XDA Labs
spityu85hun said:
not work on honor play... i tested, i try 3 times, all try failed
firmware finder not support emui 8.2
Sent from my HUAWEI COR-L29 using XDA Labs
Click to expand...
Click to collapse
It absolutely works may be you tried wrong firmware or you might have modified your system earlier.
Proof:
miststudent2011 said:
It absolutely works may be you tried wrong firmware or you might have modified your system earlier.
Proof:
Click to expand...
Click to collapse
no,not working,i no wrong firmware select, im not used/using modified system...
i select 9.0.0.156, this is pie firmware version for cor-l29...
i change dns address in router
check dns in ff
select correct firmware version
check approving... ff say approved
register update
restart to erecovery on cinnected charger
i connect my wfi
erecovery show selected firmware
download success without error
package verify whitout error
3-5sec after system recovery running write recovery failed
no longer important, I received it today on official ota update...
Sent from my HUAWEI COR-L29 using XDA Labs
miststudent2011 said:
It absolutely works may be you tried wrong firmware or you might have modified your system earlier.
Proof:
Click to expand...
Click to collapse
So we don't have to go into recovery mode, the update will show up in *System update* ?
AsimRauf_44 said:
So we don't have to go into recovery mode, the update will show up in *System update* ?
Click to expand...
Click to collapse
you say bad...
this method is "get an update via erecovery"
this method not show update in system updater
this method use erecovery update system
firmware finder not support emui8.2.
honor play running emui 8.2
you posted honor 10 picture, honor 10 running emui 8.1... emui 8.0 and 8.1 supported,8.2 not supported
Sent from my HUAWEI COR-L29 using XDA Labs
here screenshot from honor play...
Firmware Finder write, "this emui version not supported"
Sent from my HUAWEI COR-L29 using XDA Labs
Lets start with credit, Thanks to @Claritea for sharing this firmware which helped in fixing my Honor play with random config/display in about phone section.
I had a honor play with locked bootloader but it was garbled, in the sense, about phone section was messed up, there were lines on home screen and as it was demo version, I wouldn't be getting update on this phone but @Claritea helped me fixing this phone.
I had this in my about phone section (and bootloader was locked)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download-
Main firmware- Link
Update ready file- Link
Instructions-
For Update ready file
1. Extract the files to your pc.
2. For the hw_spcseas_COR-L29 folder, you will get these files:
3. On your Flash Drive, please create a folder and name it “dload”.
4. Copy the update_sd.zip and the update sd.zip.asc and then paste it to the dload folder in the Flash Drive.
5. Once you finished pasting the files, connect your Flash Drive to your Phone, and go to the Dialer, and type *#*#2846579#*#*. You will get something like this:
6. Tap the “Software Upgrade”.
7. Tap the “SDCard Upgrade”, and then choose “OK”.
8. Wait for the phone to finish updating.
9. Once it finishes, you will need to sign in your Google Account for verification.
10. After the phone boot, you will see that the Build number changed. We can now proceed with the 2nd flashing.
Main firmware file-
*NOTES:
- Please make sure that you have done the 1st Flashing Procedure.
- Please delete the dload folder that we previously used in the Flash Drive.
1. Extract the files to your pc.
2. Open the Cornell_L29A_8.2.0.101_C636CUSTC636D1_Firmware_Android_8.1.0_EMUI_8.2.0_050 folder, and look for the folder named “Software”.
3. Once you open the “Software” folder, you will see another folder named “dload”.
4. Copy the whole “dload” folder and paste it to your Flash Drive.
5. Once you finished pasting the files, connect your Flash Drive to your Phone, and go to the Dialer, and type *#*#2846579#*#*. You will get something like this:
6. Tap the “Software Upgrade”.
7. Tap the “SDCard Upgrade”, and then choose “OK”.
8. Wait for the phone to finish updating. The second update will take more time to finish as it is flashing the full firmware.
9. Once it finishes, you will need to sign in your Google Account for verification.
10. After the phone boot, you will see that the Build number changed to 8.2.0.101 (C636).
11. Please go to the [Settings] > [System] > [System Update], and then, tap the three dots at the upper part of the screen. or simply click on check for updates and you should see a new update.
12. Please tap the “Download latest full package”. if you want to update or leave as it is as per your wish.
Do you know if it´s posible to do this with an Cor-TL10 ?
I would realy like to change it to an Cor-L29
It also possible for cor al00 to l29?
abdominazer said:
Do you know if it´s posible to do this with an Cor-TL10 ?
I would realy like to change it to an Cor-L29
Click to expand...
Click to collapse
You can try. Haven't checked it yet but should work (not sure though as yours is TL10 but mine was showing L29)
dorolan05 said:
It also possible for cor al00 to l29?
Click to expand...
Click to collapse
You can try but not sure China models are different but can try.
Doesn´t work on TL10 , unfortunately...
Cor al10 is a no go as well
Worked on COR-AL00
mehdi554 said:
Worked on COR-AL00
Click to expand...
Click to collapse
How did you do it? Did you rename the files maybe?
What firmware did you have installed before?
abdominazer said:
How did you do it? Did you rename the files maybe?
What firmware did you have installed before?
Click to expand...
Click to collapse
i just bought the phone. it was on emui 8.2 b103 i guess.
i just did as the guide said.
mehdi554 said:
i just bought the phone. it was on emui 8.2 b103 i guess.
i just did as the guide said.
Click to expand...
Click to collapse
Ok, tried from Pie. Maybe it'll work from 8.2
To Demand for Similar Firmware for PIE-AL00 (Honor Play)
Ok Shashank 1320 can you give me same type of Firmware file for my device. My device is in same situation showing PIE-AL00 and want to go to stock ROM COR-AL00(C675E2R1P9).
Previously my device(Honor Play) is re-branded from Indian Version to Chinese version and Showing IMEI 00000000000 chipset Boston and many things
But now at this time device situation is:-
Model- PIE
Build No.- Chipset-boston 7.0.0.001(00ZE)
EMUI Version -5.1
Android 7.0
Please Help...
Or
How Will you able to make this Firmware???
To Demand for Similar Firmware for Android 9 pie
Do you give me the link of same type of dload firmware for Android 9 pie COR-L29 C636 Version
Quality Shaper said:
Do you give me the link of same type of dload firmware for Android 9 pie COR-L29 C636 Version
Click to expand...
Click to collapse
Firmware finder
Sent from my YAL-L21 using Tapatalk
For hw_in_COR-AL00 update ready file
Ok can you give me the update ready file for hw_in_COR-AL00
I tried to flash service Firmware
HUAWEI HONOR PLAY COR-AL00 8.2.0.150(C675GT) COR-AL00I HW IN CORNELL-AL00I 8.2.0.150(C675CUSTC675D1GT) FIRMWARE 8.1.0 R1 EMUI8.2 05015JTT [ANDROIDHOST.RU].ZIP
downloaded from android host.ru
Please help I want to go to Indian Firmware
Please give me update ready file for above Firmware
That I given..
Please
Please.....
---------- Post added at 05:14 PM ---------- Previous post was at 05:03 PM ----------
shashank1320 said:
Firmware finder
Sent from my YAL-L21 using Tapatalk
Click to expand...
Click to collapse
Ok shashank1320
can you give me update ready file for this service (dload) Firmware
HUAWEI HONOR PLAY COR-AL00 8.2.0.150(C675GT) COR-AL00I HW IN CORNELL-AL00I 8.2.0.150(C675CUSTC675D1GT) FIRMWARE 8.1.0 R1 EMUI8.2 05015JTT [ANDROIDHOST.RU].ZIP
Downloaded from android host.ru
Please suggest me how you make the update ready file for COR-L29 either you give me the update ready file for COR-AL00 hw_in I am in trouble
When I flashed above Firmware then phone condition remains in Chinese..
And when I use you global COR-L29 C636 firmware with update ready file then all things changed to global..
But I don't want my device in global variant
My device is indian COR-AL00 hw_in C675
So please give me update ready file to flash the above Firmware that I downloaded from Android host.ru
Please provide update ready file for hw_in COR-AL00 C675
Its size is only 1.4 mb and how you guys made this update ready file...
I tried making this file but when flashes then it fails...
So please help
I am trying to convert my recently converted Honor Play COR-L29(C636) to C432. Earlier this device was COR-AL00(C675) which I converted to L29(C636) by your guide. My main purpose for this was to get Widevine L1 which is available on the Europe version. I have learned that C432 does have Widevine L1 and would like to attempt the very same by flashing the first dload(which changes build number to Chipset Botson) and then flash this file (Huawei Honor Play COR-L29 Cornell-L29A 8.2.0.101(C432CUSTC432D2) Firmware Android 8.1.0 EMUI 8.2.0 05015FUC androidhost.ru). I'm flashing (8.2.0.101) because it worked the first time for AL00 to C636. If there is any help or caution you can provide then please do so.
shashank1320 said:
You can try. Haven't checked it yet but should work (not sure though as yours is TL10 but mine was showing L29)
Click to expand...
Click to collapse
I just did it with my honor play device L29 pie with non working google. I paid the tech guy from huawei service center and he was able to get the google roll back in the device but the problem is, I could not sign in at all due to unlicensed play protect. i tried your way and it worked. tnx man.
Hello guys
My HW P9 was on L09C900b136 (Android 6 / EMUI 4.1)
I wanted to upgrade my android version , so I followed a tutorial to rebrand my phone using SRK tool, Ihave chosen AL10 to be able to flash this Chinese firmware that have Oreo / emui 8.0 (EVA-AL10C00B520 – 8.0.0.520 – China)
After many fails and tries, somehow it was flashed. and I lost the twrp recovery.
Yes ! I'm on Oreo now, but there is many problems, I got an empty system (No google apps, no browser, no keyboard, .... ) and so many other bugs in the system
Another problem : I can't flash twrp (i couldn't find the suitable version for emui 8.x) .
I just want to rebrand again and use other firmware, Is there any solution to this ???
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ASPTIMES said:
Hello guys
My HW P9 was on L09C900b136 (Android 6 / EMUI 4.1)
I wanted to upgrade my android version , so I followed a tutorial to rebrand my phone using SRK tool, Ihave chosen AL10 to be able to flash this Chinese firmware that have Oreo / emui 8.0 (EVA-AL10C00B520 – 8.0.0.520 – China)
After many fails and tries, somehow it was flashed. and I lost the twrp recovery.
Yes ! I'm on Oreo now, but there is many problems, I got an empty system (No google apps, no browser, no keyboard, .... ) and so many other bugs in the system
Another problem : I can't flash twrp (i couldn't find the suitable version for emui 8.x) .
I just want to rebrand again and use other firmware, Is there any solution to this ???
Click to expand...
Click to collapse
You can not upgrade to Oreo from c900 Marshmallow, and you cannot upgrade by SRK tools - where did you find such instructions?
You must first rebrand eg to c432 and upgrade to Nougat.
Btw, there were recently few other users who asked here and were given link to the old instructions:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
For upgrading from Nougat to Oreo there is a HWOTA7 thread with detailed and precise instructions and tools (again, there wre also users here who asked about and were answered and given link to the thread):
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
Btw, there are different TWRPs for different versions of EMUI (stock Android), one for MM, one for N and one for O - you must not flash and use your eg old from MM for N or O, you will brick the phone.
In the HWOTA7 thread there are TWRPs both for O(reo) and N(ougat)
Probably you should try to downgrade to N by following the OP post #3 in the HWOTA7 thread (link above), and then (if you still wish), properly upgrade from N to O by following the OP post #2
zgfg said:
You can not upgrade to Oreo from c900 Marshmallow, and you cannot upgrade by SRK tools - where did you find such instructions?
You must first rebrand eg to c432 and upgrade to Nougat.
Btw, there were recently few other users who asked here and were given link to the old instructions:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
For upgrading from Nougat to Oreo there is a HWOTA7 thread with detailed and precise instructions and tools (again, there wre also users here who asked about and were answered and given link to the thread):
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
Btw, there are different TWRPs for different versions of EMUI (stock Android), one for MM, one for N and one for O - you must not flash and use your eg old from MM for N or O, you will brick the phone.
In the HWOTA7 thread there are TWRPs both for O(reo) and N(ougat)
Probably you should try to downgrade to N by following the OP post #3 in the HWOTA7 thread (link above), and then (if you still wish), properly upgrade from N to O by following the OP post #2
Click to expand...
Click to collapse
Thanks for your reply.
My Problem Solved !!
I Have finaly downgraded to Nogat , and now getting official update to Oreo <3
Now I just need to install Google services to restore my contacts and sms ..etc
do u know any appropriate way ?
ASPTIMES said:
Thanks for your reply.
My Problem Solved !!
I Have finaly downgraded to Nogat , and now getting official update to Oreo <3
Now I just need to install Google services to restore my contacts and sms ..etc
do u know any appropriate way ?
Click to expand...
Click to collapse
For AL10 c00, the latest available build is b540 with Patch02.
To make SIM card work (on the original L09 = Single SIM), or to make two SIM cards work (on the original L19 = Dual SIM), you must install Network patch from HWOTA7 thread.
It will also make you work 4G international bands, and will remove Chinese bloatware.
As in OP instructions, you will just need to install Google Play apk (Services will be already in)
Please read OP instructions about rooting (there is described v18.1 but it works just fine with latest v19.3)
You can also install Face Unlock add-on
ASPTIMES said:
My HW P9 was on L09C900b136 (Android 6 / EMUI 4.1)
I wanted to upgrade my android version , so I followed a tutorial to rebrand my phone using SRK tool, Ihave chosen AL10 to be able to flash this Chinese firmware that have Oreo / emui 8.0 (EVA-AL10C00B520 – 8.0.0.520 – China)
After many fails and tries, somehow it was flashed...
[/HIDE]
Click to expand...
Click to collapse
Thinking twice, your approach was interesting and it should work with SRK if, after rebranding to AL10 c00, you flashed Nougat b399 sp17 (instead of Oreo b520).
Then, you would:
a) Receive OTA upgrade for Oreo b528 (as you did when you downgraded from incomplete b520 to b399 sp17 by following HWOTA7 thread, post #3)
or
b) Flash by DLOAD b528 Service repair:
https://androidhost.ru/6sl
or
c) Continue with step 13 as in HWOTA7 thread, post #2, to directly flash b540
In cases (a) and (b), you will have to let OTA to update you from b528 to b540, and then to complete the installation by following HWOTA7 thread, post #2, step 20 and onwards
Hope that upon you downgraded to Nougat AL10 c00 b399 sp17, you successfully upgraded to Oreo b540, as in option (c)
PS: You can upload screenshots or photos directly to XDA as attachments
When creating or editing your post in browser, take Go Advanced option and then choose icon for uploading attachments - see attach
zgfg said:
Thinking twice, your approach was interesting and it should work with SRK if, after rebranding to AL10 c00, you flashed Nougat b399 sp17 (instead of Oreo b520).
Then, you would:
a) Receive OTA upgrade for Oreo b528 (as you did when you downgraded from incomplete b520 to b399 sp17 by following HWOTA7 thread, post #3)
or
b) Flash by DLOAD b528 Service repair:
https://androidhost.ru/6sl
or
c) Continue with step 13 as in HWOTA7 thread, post #2, to directly flash b540
In cases (a) and (b), you will have to let OTA to update you from b528 to b540, and then to complete the installation by following HWOTA7 thread, post #2, step 20 and onwards
Hope that upon you downgraded to Nougat AL10 c00 b399 sp17, you successfully upgraded to Oreo b540, as in option (c)
PS: You can upload screenshots or photos directly to XDA as attachments
When creating or editing your post in browser, take Go Advanced option and then choose icon for uploading attachments - see attach
Click to expand...
Click to collapse
yeah it should work that way, it was jut my fault i did not flash the files using the right method.
Thank you again for your help
I'm sorry abt the screenshots , i'm new here, and thanks for the tip.
ASPTIMES said:
yeah it should work that way, it was jut my fault i did not flash the files using the right method.
Thank you again for your help
I'm sorry abt the screenshots , i'm new here, and thanks for the tip.
Click to expand...
Click to collapse
Just wanted to ask you, have you made it to Oreo AL10 c00 b540 (Patch02) with NW patch and Face Unlock?
Or you maybe moved further to Open Kirin Treble ROMs, like Omni Pie
Or you pulled back to c432 Nougat...
zgfg said:
Just wanted to ask you, have you made it to Oreo AL10 c00 b540 (Patch02) with NW patch and Face Unlock?
Or you maybe moved further to Open Kirin Treble ROMs, like Omni Pie
Or you pulled back to c432 Nougat...
Click to expand...
Click to collapse
Yes I made it
Im on Oreo AL10 c00 b540 and installed all patches