Related
Ok so I've seen a lot of confusion on how to correctly flash OxygenOS on your brand new OnePlus 5, and also how to correctly and easily root your phone.. This guide aims to clear up any confusion regarding this. Ready? Let's move on.
Q: What's the difference between International and Chinese versions of the OnePlus 5?
A: Hardware-wise there is absolutely no difference between the 2 versions. In terms of software, the international version runs OxygenOS (OOS) while the Chinese version runs HydrogenOS(H2OS). H2OS has no Google services pre-installed and is generally not recommended for use outside China. Both OxygenOS and HydrogenOS are official updates by OnePlus.
Q: I bought a Chinese phone. How do I install OxygenOS then?
A: 1. Download the latest OxygenOS from here. Download the full zip and NOT the OTA update.
2. Place it in the root of your internal memory. Basically don't put the file in any folder.
3. Go to Settings > System updates, press the gear icon and select Local upgrade.
4. Choose the file, the phone will boot into recovery and everything is done.
Q: OK I want to root my phone but I don't want to lose Android Pay, Netflix, Pokemon GO etc. Is it possible?
Simple answer: Yes. Long answer: Maybe not in the long run.
Why is that so? You see, back in the old days there were little downsides to rooting. Alas, Android Pay and Pokemon GO came along, and in an effort to tighten up security, Google implemented this thing called
SafetyNet. Basically it's a measure to test your system integrity, meaning that any modification to system will trigger SafetyNet and many apps will be "locked down". Android Pay and Pokemon GO will not work,
and Netflix won't show up on Google Play anymore. Some devices even check for unlocked bootloader, but apparently not the OnePlus 5, so you don't have to switch to a custom kernel to root.
To overcome this problem, the brilliant minds at XDA came up with system-less root. Chainfire was the first to implement it in SuperSU, but right now nobody uses SuperSU anymore. Magisk is the new kid in town,
and quite frankly much better IMO.
Q: Alright enough talk, how do I root the phone?
A: Patience my young Padawan. I will get to that in a moment. But here are some things you have to know.
1. Rooting involves unlocking your bootloader, and ALL YOUR DATA WILL BE WIPED. Keep a backup and move everything in your internal memory somewhere else.
2. Magisk may beat SafetyNet now, but there is no guarantee this will always be the case. So your SafetyNet enabled apps may not work all the time.
3. OTA updates from OnePlus will work differently when you are rooted. But hey that's what this guide is for. :good:
Easy rooting guide
1. Install ADB drivers.
2. Go into settings > about phone. Press the build no. a few times to activate developer options.
3. Turn on developer options, OEM unlocking and USB debugging.
4. Connect phone to PC and allow ADB access on phone. Wait for drivers to finish installing.
5. Download and install this simple tool on your PC.
6. Download one of the 2 TWRP recoveries below.
TWRP Official
xdvs23's TWRP
7. Open the All-in-One tool and make sure your device is recognised as OnePlus 5. Click on Unlock bootloader. Your bootloader is now unlocked and all your DATA WILL BE WIPED!
8. Select the "and boot it" arrow and click flash TWRP, click manual mode and choose the TWRP.img file you downloaded earlier.
9. After everything is done, your phone should now boot into TWRP successfully. Do not reboot yet.
10. On your PC, download the latest version of Magisk. Place the zip file onto your phone using USB and flash it with TWRP. Clear cache and reboot into system.
11. You should now see a new app called Magisk Manager. Check for updates!
12. However, do keep in mind not to mess around the system. If you need something, check to see if there any Magisk Modules available. There is also a small repo in the downloads section in Magisk Manager. Also Adaway works great with Magisk. Just make sure to turn on systemless host file in Magisk manager.
14. Congrats you are now rooted!:highfive:
Q: Alright now that I'm rooted, how do I get official updates?
A: 1. Download the latest OxygenOS from here. Download the full zip and NOT the OTA update. Place it on your phone. Make sure you also have your Magisk zip.
2. Boot into TWRP. Press the volume button when the bootloader unlocked screen comes up. Use volume buttons and power button to select recovery.
3. Flash the OxygenOS zip file. DO NOT reboot yet!
4. Tap the home button and flash Magisk. Clear cache.
5. Reboot into system and you are done!
Hope this guide is simple enough for you guys to understand. It might seem daunting at first, but practice makes perfect.
Also it is not a requirement to root, most people get by fine without ever rooting. But we are not like normal people, are we? Why else would we be on XDA then?
Further questions
Q1: Why Magisk and not SuperSU?
A: Besides the fact that Magisk is being constantly updated to bypass SafetyNet, it is also open-source. Wish I could say the same for SuperSU, the app is not what it used to be. Chainfire is no longer aware of the changes made in his app and I for one am not willing to take my chances with a shady developer. I had countless bad experiences with Chinese apps, many of them created by large companies. Check out this thread for more info.
Q2: Why exactly is HydrogenOS not recommended for use outside China?
A: Besides the aforementioned lack of Google apps, HydrogenOS is also tweaked differently from OxygenOS. It is significantly more aggressive in killing apps and not letting them run in the background, as you would expect with the number of rogue apps in China, made worse by the fact that there is no Play Store in China. OxygenOS on the other hand has a limit of 32 apps in memory, which I guess is a nice compromise between performance and battery life.
Reserved just in case. Probably will never need it though.
to be fair, there are still lots of people using SuperSU..
What should I do if I still want to use SuperSU?
2 noob questions @jasonwsc or anyone who knows
How about wiping dalvik and cache?
And how about encryption? Do I need to remove my fingerprint/security pattern before flashing OR rooting?
Thanks a lot for your help, the OP5 will be the first phone I can actually root. My old Xperia Z (2013) had a locked bootloader that was not unlockable haha.
ipredatorv said:
2 noob questions @jasonwsc or anyone who knows
How about wiping dalvik and cache?
And how about encryption? Do I need to remove my fingerprint/security pattern before flashing OR rooting?
Thanks a lot for your help, the OP5 will be the first phone I can actually root. My old Xperia Z (2013) had a locked bootloader that was not unlockable haha.
Click to expand...
Click to collapse
Wiping Dalvik and cache is usually done after flashing a ROM in TWRP. Not that big of deal now that many apps use ART, but still good to do to prevent app crashes.
No need to remove fingerprint security before rooting.
iamelton said:
to be fair, there are still lots of people using SuperSU..
Click to expand...
Click to collapse
Ningyou Higeki said:
What should I do if I still want to use SuperSU?
Click to expand...
Click to collapse
Just flash SuperSU zip instead of Magisk.
I don't know why anyone still uses SuperSU though. For one, it's sold to a Chinese company and is no longer open source. Not to mention it doesn't pass SafetyNet at all.
jasonwsc said:
Wiping Dalvik and cache is usually done after flashing a ROM in TWRP. Not that big of deal now that many apps use ART, but still good to do to prevent app crashes.
No need to remove fingerprint security before rooting.
Click to expand...
Click to collapse
Thanks for the clarification!
I only asked about wiping dalvik/cache because some other people here recommended that, as it may help to fix my battery drain issue.
Sent from my ONEPLUS A5000 using Tapatalk
ipredatorv said:
Thanks for the clarification!
I only asked about wiping dalvik/cache because some other people here recommended that, as it may help to fix my battery drain issue.
Sent from my ONEPLUS A5000 using Tapatalk
Click to expand...
Click to collapse
It might help with your battery drain issue, but chances are some apps are running in the background draining your battery.
Google services not working
I have installed oxygen OS in my chinese version OP5 following above method. However, after installing oxygen OS my google play store isnt working. When I open google play store, it stucks on checking info.
Nishatian1 said:
I have installed oxygen OS in my chinese version OP5 following above method. However, after installing oxygen OS my google play store isnt working. When I open google play store, it stucks on checking info.
Click to expand...
Click to collapse
Just a wild guess, but are you still in China? Check your VPN before trying to access the Google Playstore. Otherwise, remove the Playstore and download the most recent Playstore apk from a website like apkmirror. If they offer multiple versions, go for ARM 64.
Sent from my ONEPLUS A5000 using Tapatalk
jasonwsc said:
Just flash SuperSU zip instead of Magisk.
I don't know why anyone still uses SuperSU though. For one, it's sold to a Chinese company and is no longer open source. Not to mention it doesn't pass SafetyNet at all.
Click to expand...
Click to collapse
I'm a little tired of tuning my phone now. And I don't care about SafetyNet. BTW, how's Magisk's compatibility now?
jasonwsc said:
Just flash SuperSU zip instead of Magisk.
I don't know why anyone still uses SuperSU though. For one, it's sold to a Chinese company and is no longer open source. Not to mention it doesn't pass SafetyNet at all.
Click to expand...
Click to collapse
I got my Chinese OP5 two days ago and went through the whole procedure of unlocking, rooting, and flashing OxygenOS. Now I see that somebody took the time to write a nice guide on how to do it. Thanks @jasonwsc! I really wish I had this available to me already. I am sure it's gonna be a great help to others though!
I wasn't aware that SuperSU had been sold to a Chinese company through and that it is no longer open source. Knowing what I know now I regret flashing SuperSU yesterday and would love to switch to Magisk.
My question would be: what's the "proper way" to switch from SuperSU to Magisk? Just unroot via SuperSU and flash Magisk, or is there a better, cleaner way?
Edit:
Nevermind, just searched it and there's a super nice guide here.
Ningyou Higeki said:
I'm a little tired of tuning my phone now. And I don't care about SafetyNet. BTW, how's Magisk's compatibility now?
Click to expand...
Click to collapse
Magisk works fine, have no issues so far.
Hello,
I have the opportunity to receive an OP5T (128 GB)
from China. The ROM will be Hydrogen OS and not Oxygen OS.
I would like to be sure that the procedure used to install Oxygen OS will be the same as for the OP5?
Moazamali said:
Hello,
I have the opportunity to receive an OP5T (128 GB)
from China. The ROM will be Hydrogen OS and not Oxygen OS.
I would like to be sure that the procedure used to install Oxygen OS will be the same as for the OP5?
Click to expand...
Click to collapse
Yes it's the same. Just flash the firmware file for OP5T instead of the OP5.
i have international model oneplus 5. My phone was bricked, so i unbricked the phone by flashing h2os. I have rooted my phone with supersu and unrooted it again by flashing stock recovery. i want to now flash my phone with oxygenos. i have tried but no success. Please guide me with correct method.
Thanks
nayemohd said:
i have international model oneplus 5. My phone was bricked, so i unbricked the phone by flashing h2os. I have rooted my phone with supersu and unrooted it again by flashing stock recovery. i want to now flash my phone with oxygenos. i have tried but no success. Please guide me with correct method.
Thanks
Click to expand...
Click to collapse
See here https://forum.xda-developers.com/oneplus-5/how-to/official-oxygenos-4-5-2-7-1-1-ota-t3627003 it might be useful to format internal storage.
strongst said:
See here https://forum.xda-developers.com/oneplus-5/how-to/official-oxygenos-4-5-2-7-1-1-ota-t3627003 it might be useful to format internal storage.
Click to expand...
Click to collapse
Good morning all,
I have the same problem. Installed a H2os on a international oneplus 5.
Didn't like it so much so I formatted the system and installed the open beta 26.
However if I want to use the latest recovery either to clear cache or davlik cache I get a bunch of errors.
Any idea why?
kimon60 said:
Good morning all,
I have the same problem. Installed a H2os on a international oneplus 5.
Didn't like it so much so I formatted the system and installed the open beta 26.
However if I want to use the latest recovery either to clear cache or davlik cache I get a bunch of errors.
Any idea why?
Click to expand...
Click to collapse
Which h2os version and which recovery version did you use(file names please)? What do you mean with formatting the system? What did you wipe or format exactly?
Hello all,
On my new Pixel 3 XL, I installed Magisk immediately after doing the initial setup. I then tried taking the January 2019 OTA update (the phone was running the original build from September 2018) and installing the update using the instructions here for devices with A/B partitions: https://topjohnwu.github.io/Magisk/tutorials.html#ota-installation
This however did not work and the update still failed to install. I ended up doing the upgrade manually via the bootloader but I would like to ask about how to handle this process for future updates. I am running the latest stable version of Magisk.
Thank you
Is it possible that /system or /vendor have been altered in some way? That would cause the OTA to fail...
Didgeridoohan said:
Is it possible that /system or /vendor have been altered in some way? That would cause the OTA to fail...
Click to expand...
Click to collapse
I still pass SafetyNet though. Wouldn't modifying either of those cause it to fail?
David B. said:
I still pass SafetyNet though. Wouldn't modifying either of those cause it to fail?
Click to expand...
Click to collapse
As a rule, you can do quite heavy modifications to both /system and/vendor and still pass SN. So, not necessarily...
Didgeridoohan said:
As a rule, you can do quite heavy modifications to both /system and/vendor and still pass SN. So, not necessarily...
Click to expand...
Click to collapse
Well I do use the Internal Audio Plugin which may write stuff to /system and/or /vendor. I am not sure though. I do not remember if I had it installed at that point though. I do have it installed now though. If it turns out that the app is the reason it's not working, hopefully I will be able to uninstall it when trying the OTA again.
Hi all. I have searched for information and have seen a lot and varied. I come to confirm more than anything and to know if you have a clear idea.
I have my 3XL pixel rooted with Magisk.
First question: With the root of magisk the system does NOT detect the new monthly update updates. Is this normal? I understood that I would detect it but that it would NOT let me update it.
As a result of that question I found this other ...
https : // topjohnwu. github.io/Magisk/tutorials.html (sorry, there are spaces)
I'm not sure if this tutorial is valid for the Pixel 3XL. I have reproduced it and ... or something I have not done well or is not compatible with our device.
The objective of all this is to know if, with the rooted phone, OTAs can be detected and, in case the answer is no, to know if there is any method like the one that Magisk proposes without having to download the OTA, install by the recovery and re-root with twrp.
I have not used any magisk module, but I do have Es File Explorer installed with root viewer, titanium backup and Swift Insaller. I do not think this has modified / system or / vendor.
Thanks and best regards!
ciltocruz said:
Hi all. I have searched for information and have seen a lot and varied. I come to confirm more than anything and to know if you have a clear idea.
I have my 3XL pixel rooted with Magisk.
First question: With the root of magisk the system does NOT detect the new monthly update updates. Is this normal? I understood that I would detect it but that it would NOT let me update it.
As a result of that question I found this other ...
https : // topjohnwu. github.io/Magisk/tutorials.html (sorry, there are spaces)
I'm not sure if this tutorial is valid for the Pixel 3XL. I have reproduced it and ... or something I have not done well or is not compatible with our device.
The objective of all this is to know if, with the rooted phone, OTAs can be detected and, in case the answer is no, to know if there is any method like the one that Magisk proposes without having to download the OTA, install by the recovery and re-root with twrp.
I have not used any magisk module, but I do have Es File Explorer installed with root viewer, titanium backup and Swift Insaller. I do not think this has modified / system or / vendor.
Thanks and best regards!
Click to expand...
Click to collapse
Hello,
The issue that you are describing is identical to what I observed during the February OTA update. It was not showing up on my phone. Supposedly if you wait long enough it will be detected, but I got impatient with waiting and just did it manually. It is worth noting however that when I got my Pixel 3 XL (I got it in January), I rooted it immediately before installing the January patches, and the behavior that you described as what should have happened is what I observed: the update was detected, but I could not install it. The odd thing about it was that even after uninstalling Magisk, I still could not get it to install and therefore ended up manually sideloading that update as well. It is worth noting that as part of that sideload, I chose to wipe the phone so that whatever modifications I must have made to /system or /vendor would be gone.
I am sorry that I could not provide any real help for this issue since I have been sideloading as a workaround. If you come up with a real solution to this, please let me know. Otherwise, you may want to just sideload manually.
David B. said:
Hello,
The issue that you are describing is identical to what I observed during the February OTA update. It was not showing up on my phone. Supposedly if you wait long enough it will be detected, but I got impatient with waiting and just did it manually. It is worth noting however that when I got my Pixel 3 XL (I got it in January), I rooted it immediately before installing the January patches, and the behavior that you described as what should have happened is what I observed: the update was detected, but I could not install it. The odd thing about it was that even after uninstalling Magisk, I still could not get it to install and therefore ended up manually sideloading that update as well. It is worth noting that as part of that sideload, I chose to wipe the phone so that whatever modifications I must have made to /system or /vendor would be gone.
I am sorry that I could not provide any real help for this issue since I have been sideloading as a workaround. If you come up with a real solution to this, please let me know. Otherwise, you may want to just sideload manually.
Click to expand...
Click to collapse
I see that there is no other option than to do it manually and reinstall magisk later every month ...
ciltocruz said:
I see that there is no other option than to do it manually and reinstall magisk later every month ...
Click to expand...
Click to collapse
Well at this point I will not have a chance to test this belief out until March.
David B. said:
Well at this point I will not have a chance to test this belief out until March.
Click to expand...
Click to collapse
I rerooted the phone with Magisk and it's perfect.
Unfortunately, with the March update, my 3LX pixel will not notify me of this update and I will have to install it manually with adb.
Then I will have to manually re-root magisk. I can not find a way to make the magisk tutorial work so I do not have to do this manual process. I believe that Magisk modifies /vendor and /system and "to uninstall magisk with the boot_patched", to the new pixel 3 or to Android Pie does not matter to him because he knows what is happening.
ciltocruz said:
I rerooted the phone with Magisk and it's perfect.
Unfortunately, with the March update, my 3LX pixel will not notify me of this update and I will have to install it manually with adb.
Then I will have to manually re-root magisk. I can not find a way to make the magisk tutorial work so I do not have to do this manual process. I believe that Magisk modifies /vendor and /system and "to uninstall magisk with the boot_patched", to the new pixel 3 or to Android Pie does not matter to him because he knows what is happening.
Click to expand...
Click to collapse
I am confused. How can you know what is going to happen with the March update when it has not been released yet?
David B. said:
I am confused. How can you know what is going to happen with the March update when it has not been released yet?
Click to expand...
Click to collapse
Nooooo Sorry, maybe I explained wrong.
I want to say that, like in January and February, when the March update is released, the Pixel 3XL, as it is rooted, will not recognize it. It will not give me the notice of a new update.
Better like that?
ciltocruz said:
Nooooo Sorry, maybe I explained wrong.
I want to say that, like in January and February, when the March update is released, the Pixel 3XL, as it is rooted, will not recognize it. It will not give me the notice of a new update.
Better like that?
Click to expand...
Click to collapse
Oh I understand. I suppose we'll just have to wait and see. ?
David B. said:
Oh I understand. I suppose we'll just have to wait and see.
Click to expand...
Click to collapse
I installed the March update via recovery. No problem. Then I have reinstalled Magisk with the TWRP image.
I still do not know how to make this tutorial for Pixel 3 work
https://topjohnwu.github.io/Magisk/tutorials.html#ota-installation
Has anyone succeeded? The objective is:
- That the rooted phone detects the OTA.
- To be able to uninstall the root with the Magisk Manager application.
- To be able to install the OTA like any normal user.
- Be able to reinstall the root via Magisk Manager.
All without the need of adb, sideload, recovery, TWRP or anything "technical".
Greetings!
ciltocruz said:
I installed the March update via recovery. No problem. Then I have reinstalled Magisk with the TWRP image.
I still do not know how to make this tutorial for Pixel 3 work
https://topjohnwu.github.io/Magisk/tutorials.html#ota-installation
Has anyone succeeded? The objective is:
- That the rooted phone detects the OTA.
- To be able to uninstall the root with the Magisk Manager application.
- To be able to install the OTA like any normal user.
- Be able to reinstall the root via Magisk Manager.
All without the need of adb, sideload, recovery, TWRP or anything "technical".
Greetings!
Click to expand...
Click to collapse
I also had to install the update via recovery, as the option to use the built-in updater was not detecting that the update was available again. Perhaps it's time we ask @topjohnwu Magisk Queries/ @topjohnwu about this?
I've seen (and commented in) at least 4 previous threads reporting the same issue with OTA updates and none of them have been taken seriously or prompted any kind of further investigation. Oh well, 5th time lucky perhaps?
Anyway, I have exactly the same issue with my Pixel 2; I used to receive notifications for OTA updates back when I was running on Oreo with Magisk, but after updating to Pie in September 2018 I haven't received a single new OTA notification.
Pie was installed from the factory image, including a device wipe, so it was a completely fresh start. I've also tried reflashing system.img and vendor.img just in case those partitions somehow got modified at some point, but it made no difference. My device simply will not detect new OTA updates, so my only option is to sideload the update and reflash magisk every month.
As per a previous post of mine, I found other reports of the same issue on Reddit and the common factors seemed to be Pixel devices, Pie and Magisk.
nogaff said:
I've seen (and commented in) at least 4 previous threads reporting the same issue with OTA updates and none of them have been taken seriously or prompted any kind of further investigation. Oh well, 5th time lucky perhaps?
Anyway, I have exactly the same issue with my Pixel 2; I used to receive notifications for OTA updates back when I was running on Oreo with Magisk, but after updating to Pie in September 2018 I haven't received a single new OTA notification.
Pie was installed from the factory image, including a device wipe, so it was a completely fresh start. I've also tried reflashing system.img and vendor.img just in case those partitions somehow got modified at some point, but it made no difference. My device simply will not detect new OTA updates, so my only option is to sideload the update and reflash magisk every month.
As per a previous post of mine, I found other reports of the same issue on Reddit and the common factors seemed to be Pixel devices, Pie and Magisk.
Click to expand...
Click to collapse
What's odd about my situation is that when I first got the phone and rooted the image that it came with (September 2018), I did get the OTA notification. I just could not get it to install even after following the Magisk uninstallation steps provided in the official Magisk tutorial. It's only a minor inconvenience and I can live with it, but the fact that it happens still bothers me.
David B. said:
What's odd about my situation is that when I first got the phone and rooted the image that it came with (September 2018), I did get the OTA notification. I just could not get it to install even after following the Magisk uninstallation steps provided in the official Magisk tutorial. It's only a minor inconvenience and I can live with it, but the fact that it happens still bothers me.
Click to expand...
Click to collapse
This happened to me too. I put the root and the first OTA did arrive but, because I had root, I could not install. I had to do it manually with adb.
ciltocruz said:
This happened to me too. I put the root and the first OTA did arrive but, because I had root, I could not install. I had to do it manually with adb.
Click to expand...
Click to collapse
Did you try using the tutorial as well?
David B. said:
Did you try using the tutorial as well?
Click to expand...
Click to collapse
Yes, but with my rooted device the notification of NEW UPDATE does not appear. I know I can not INSTALL it, but is there also no update notice? This is what I need. An update notice.
With that warning I will be able to patch the boot image with magisk and then I will be able to download and install the OTA. Then re-rooted and ready.
May 2020 QQ2A.200501.001.B2 "FLAME" Magisk-Patched Boot Img [+UPDATE/KEEP ROOT GUIDE]
Another month, another update. I'll keep churning out these patched / stock file uploads and easy noob-friendly update guides while guinea pigging the updates, so long as my area is still on lockdown and I'm not back to work yet, lol.
I've also installed and tested / verified that Kirisakura 4.2.0 is working great with this month's patch so far.
Also have EdXposed Canary 0.5.0.0 (4548) YAHFA installed. SafetyNet still passing as of now.
Magisk v20.4 Patched Boot Image: https://www.androidfilehost.com/?fid=4349826312261796525
Factory Untouched Boot Image: https://www.androidfilehost.com/?fid=4349826312261796524
THESE FILES ARE FOR 10.0.0 (QQ2A.200501.001.B2, May 2020, All carriers except TW) ONLY! PLEASE ONLY FLASH IF YOU KNOW WHAT YOU'RE DOING!
If these files and/or guides are helpful, please drop a thanks and let me know. =)
EASY UPDATE / SEAMLESS KEEP-ROOT UPDATE PROCESS (using a PC - a very intuitive, effective, and relatively safe method).
** You can only follow this guide exactly if coming from build QQ2A.200405.005, Apr 2020. But the general idea is the same for other builds, you just need the correct files for your device.
flame-qq2a.200405.005-factory-dtbo.img: https://www.androidfilehost.com/?fid=4349826312261796522
flame-qq2a.200405.005-factory-boot.img: https://www.androidfilehost.com/?fid=4349826312261763724
May 2020 sideload OTA zip: https://dl.google.com/dl/android/aosp/flame-ota-qq2a.200501.001.b2-46940f66.zip
I DID NOT BOOT BACK INTO O/S UNTIL ALL STEPS WERE COMPLETED - I DID THIS TO ENSURE EVERYTHING WOULD BOOT BACK UP WITH MAGISK / EDXPOSED ALL RUNNING PROPERLY RIGHT AWAY
1. boot into bootloader
----------------
** I was on custom kernel, so I needed to flash BOTH the stock boot and dtbo images
2. fastboot flash boot flame-qq2a.200405.005-factory-boot.img
3. fastboot flash dtbo flame-qq2a.200405.005-factory-dtbo.img
......* these steps to restore stock recovery; dtbo.img also necessary for some kernel installations
-----------------
4. use volume keys to change selection to boot to Recovery Mode
......- when you reach the android symbol with No Command, hold power button, tap volume up, in case you've forgotten
5. choose option "Apply update from ADB"
6. adb sideload flame-ota-qq2a.200501.001.b2-46940f66.zip
7. Once the OTA sideload is done, Reboot to bootloader (you'll also notice it's now on the other slot after OTA flashed)
8. fastboot flash boot flame-qq2a.200501.001.b2-magisk_patched-20.4.img
9. done, start the phone
(Optional - Flash custom kernel. If you had a custom kernel, you need to re-flash it. I've only personally tested with Kirisakura though.)
This was a 100% seamless update that required no additional / re-setup of any of my Magisk or EdXposed setups. All of the factory files can be found here https://developers.google.com/android/images. boot.img and dtbo.img are in their corresponding full Factory Image zips, and the ota zip is under Full OTA Images.
Thank you for making this so convenient!
ahalol said:
Thank you for making this so convenient!
Click to expand...
Click to collapse
:highfive:
You can thank my wife for going with the P4 instead of P4XL . Now gives me 2 phones to keep up with, although they're basically identical in process. Might as well share with yall over on this board, which seems to get a little less love and attention. But we're definitely lovin the switch to Pixels. Awesome camera too, which is great because we just had our first child 4 months ago and these phones take amazing photos. And this is coming from 2 phones that already had great cameras (HTC U11 and U12+)! I love taking photos when he's sleeping using Night Sight mode. He's so adorable, it comes out so clean, and there's just something about that sleepy ambience .
i just saw on my google news feed that the May patch just started dropping to our devices. i go check XDA and this post is already here. wow that was fast haha! went perfectly smoothly just like last month, thanks so much!!
Why not update the OTA via Magisk, or is this only for those which devices is not able to download OTA:s?
Currently, I have rooted with Magisk, still waiting for OTA update notification in my device...
Should i restore images in Magisk and/or disable any modules or just let 'er rip?!
Vantskruv said:
Why not update the OTA via Magisk, or is this only for those which devices is not able to download OTA:s?
Currently, I have rooted with Magisk, still waiting for OTA update notification in my device...
Click to expand...
Click to collapse
redeyss said:
Should i restore images in Magisk and/or disable any modules or just let 'er rip?!
Click to expand...
Click to collapse
@Vantskruv: FYI, you won't get the OTA update notification because you're modified right now. You can restore the boot image in Magisk first and wait for the OTA notification (what you're thinking of is something like this: https://forum.xda-developers.com/pixel-4-xl/how-to/guide-update-retain-root-t4003839). But from what I understand, it's pretty hit or miss. Apparently it's hit or miss even on complete bone stock anyway lol. The method I outlined just works nice and reliably even when rooted and modded.
@redeyss: Restoring the stock boot image in Magisk Manager is similar to the method linked above, and then taking the OTA the normal way. But if you flashed a custom kernel, keep it mind it won't restore the dtbo partition (not sure if it's necessary with that method tbh). You shouldn't need to restore images in Magisk, nor diable any modules. When you flash the factory April boot and dtbo images, it's doing the same thing as restoring the images through Magisk (plus dtbo). Just let er rip, and if you have any issues, you can always flash the new unmodified factory boot image, which will essentially disable Magisk, and then work from there. It's a very safe method. =)
edit: also in the event of bootloop, this is a great thread to read and understand: https://forum.xda-developers.com/pixel-4/how-to/magisk-modules-disabler-booting-magisk-t3991739
Thank you @i5lee8bit for your answer. Luckily I have restrained myself yesterday to update, thought I where in the Pixel 4XL thread, while this is for the Pixel 4. :laugh:
I am just curious, do any of you expert guys/girls know why this is happening, that OTA updates is not pushed on rooted phones?
Do Google have algorithms that temporarily bans systems which is rooted?
Or is it so simple that some type of fingerprint is changed when rooted, so Google update services does not recognise the device, and not pushing OTA:s?
Sorry for the questions, no need to answer them. It was a long time ago I rooted Android:s, and I have forgot many things.
I think I will try to manually update everything, even though there are more steps included, just to learn how to do it.
https://www.youtube.com/watch?v=kZY8qiz2SZ0
Vantskruv said:
Thank you @i5lee8bit for your answer. Luckily I have restrained myself yesterday to update, thought I where in the Pixel 4XL thread, while this is for the Pixel 4. :laugh:
I am just curious, do any of you expert guys/girls know why this is happening, that OTA updates is not pushed on rooted phones?
Do Google have algorithms that temporarily bans systems which is rooted?
Or is it so simple that some type of fingerprint is changed when rooted, so Google update services does not recognise the device, and not pushing OTA:s?
Sorry for the questions, no need to answer them. It was a long time ago I rooted Android:s, and I have forgot many things.
I think I will try to manually update everything, even though there are more steps included, just to learn how to do it.
https://www.youtube.com/watch?v=kZY8qiz2SZ0
Click to expand...
Click to collapse
No worries, the process for the 4XL is the exact same, but good catch; you definitely need to use the correct files for the device. I actually posted a similar thread with the relevant 4XL files over on that forum.
Not sure exactly the mechanism used to prevent the normal OTA, but probably just checks for a modified boot partition. In any case, the normal factory OTA if I understand correctly relies in part on factory recovery commands at some point, and a modified boot partition won't be able to use them. In fact, try booting to recovery with the modified boot partition flashed and you'll notice it can't load recovery. I may be wrong about the exact reason though. But think about it: even if we had TWRP, the factory OTA mechanism can't make use of it. Even if the OTA popped up while rooted, it probably wouldn't be able to do it, or worse, cause a failure and corruption. I would dare say we're fortunate they prevent factory OTA when running modified.
Anyway, there are a lot of complicated guides out there, and that's why I wanted to share my method. I didn't need to do any further research and it's very intuitively sound. Steps 2+3 essentially restore stock boot and therefore recovery (and dtbo), the rest pretty much follows a standard OTA sideload, and then it's structured in such a way that you're flashing the new Magisk patched boot image before even starting the phone back up. Making it a seamless, keep-root easy upgrade.
Wow ..... what an easy, elegant way to get my Coral device updated while keeping root. Followed the OP process, but used these commands instead to get the June 2020 security update:
- fastboot flash boot coral-qq3a.200605.001-factory-boot.img
- fastboot flash dtbo coral-qq3a.200605.001-factory-dtbo.img
- adb sideload coral-ota-qq3a.200605.001-3b5bb1bd.zip
- fastboot flash boot coral-qq3a.200605.001-magisk_patched-20.4.img
Thanks, @i5lee8bit . Well done. :good:
does anyone have a thread to point me to that is a step by step guide for setting up ADB and how to flash? I did everything a year ago but now I just factory reset and am stuck in boot loop, can't remember all the commands and everything.
in_dmand said:
does anyone have a thread to point me to that is a step by step guide for setting up ADB and how to flash? I did everything a year ago but now I just factory reset and am stuck in boot loop, can't remember all the commands and everything.
Click to expand...
Click to collapse
Did you fix the issue?
[UPDATE/KEEP ROOT GUIDE] SEP 2020 (RP1A.200720.009) "FLAME" Magisk/Stock Boot Images
PLEASE READ ALL ADDITIONAL NOTES IN THE FIRST 2 POSTS!!!
THIS IS A MAJOR UPDATE TO A NEW VERSION OF ANDROID AND CONSEQUENTLY COMES WITH A MUCH HIGHER RISK OF BOOTLOOPING IF YOU'RE NOT CAREFUL.
PLEASE DROP A QUICK THANKS IF YOU STILL FIND THESE GUIDES HELPFUL! :good:
(I PERSONALLY AM WAITING TO UPDATE TO ANDROID R (WAITING ON GRAVITYBOX) SO I WON'T BE ABLE TO HELP AS MUCH - PLEASE BE KIND TO ONE ANOTHER AND HELP EACH OTHER OUT! )
***IF YOU ARE STILL ON AUGUST / ANDROID 10 BUILD AND WANT TO UPGRADE TO CURRENT OCTOBER 2020 BUILD: I HIGHLY RECOMMEND FOLLOWING THIS SEPTEMBER UPDATE GUIDE FIRST (TO FIRST ENSURE YOU PROPERLY UPGRADE TO ANDROID 11, ELIMINATE ANY POTENTIAL ISSUES WITH BOOTLOOPING, MAKE SURE ALL MODULES ARE UP TO DATE AND COMPATIBLE, ETC). ONCE YOU ARE SUCCESSFULLY UPGRADED TO SEPTEMBER BUILD ANDROID 11, LET IT SETTLE AND PLAY AROUND FOR A WHILE BEFORE YOU FOLLOW THE OCTOBER UPDATE GUIDE.***
IMPORTANT!! THESE FILES / THIS THREAD IS FOR PIXEL 4 "FLAME" ONLY, NOT PIXEL 4 XL "CORAL"!!
**IT IS HIGHLY RECOMMENDED TO PATCH THE STOCK BOOT IMAGE YOURSELF, FROM YOUR OWN DEVICE, USING MAGISK MANAGER. WHILE THERE'S A GOOD CHANCE THE FILE I PROVIDED BELOW WILL BE IDENTICAL (USE A FILE HASH CHECKSUM TOOL IF YOU'RE CURIOUS), THERE IS ALSO A CHANCE THEY MAY HAVE SMALL, BUT SIGNIFICANT, VARIANCES**
Thanks for the info and link, @wrongway213
Link to @topjohnwu's post: https://twitter.com/topjohnwu/status/1272136975022084097?s=19
ALL FILES BELOW ARE FOR "RP1A.200720.009, Sep 2020"!
Magisk Canary v21.0 Patched Boot Image: https://www.androidfilehost.com/?fid=10763459528675562381
Factory Untouched Boot Image: https://www.androidfilehost.com/?fid=10763459528675562110
Factory Untouched DTBO Image: https://www.androidfilehost.com/?fid=10763459528675562111
[SAFETYNET INFO]: Again, I'm not updating myself yet, so I'm not sure about this. I will update this info as others report back. On Android 10, using the MagiskHide Props Config module (or an alternate module created by Displax, though I prefer Didgeridoohan's module) and choosing option 2 - Force BASIC key attestation would force BASIC HW attestation and allow SafetyNet to pass again. This works perfectly for me, and I even run additional mods including EdXposed. I'm not sure if this works on Android 11, and I won't be able to confirm myself for a while. If anybody tries it, please let me know and I'll update this section. The module and info on using it can be found here: https://forum.xda-developers.com/ap...just search for it in the Magisk Manager app.
READ THIS ENTIRE POST BEFORE PROCEEDING!
ADDITIONAL PRELIMINARY STEPS COMPARED TO PREVIOUS MONTHS - DO NOT SKIP!!!!:
A. Make sure all of your Magisk / EdXposed modules are updated for compatibility with R. For example:
* Magisk Module: Riru (Riru - Core) v21.3
* Magisk Module / EdXposed version: EdXposed v.0.5.0.6-android_r (4561) [this is a Canary build]
B. Recommend disabling any Magisk and/or Xposed modules that have not been tested with Android R.
C. Install latest Magisk Manager build: https://github.com/topjohnwu/Magisk/releases/download/manager-v8.0.2/MagiskManager-v8.0.2.apk
D. Regular reboot the phone to make sure updates are applied before proceeding with the rest of the update process.
---------------------------
EASY UPDATE / SEAMLESS KEEP-ROOT UPDATE PROCESS (using a PC - a very intuitive, effective, and relatively safe method).
** You can only follow this guide verbatim if coming EXACTLY from build "10.0.0 (QQ3A.200805.001, Aug 2020)". But the general idea is the same for other builds, you just need the correct files for your device.
flame-qq3a.200805.001-factory-dtbo.img: https://www.androidfilehost.com/?fid=8889791610682911608
flame-qq3a.200805.001-factory-boot.img: https://www.androidfilehost.com/?fid=8889791610682911606
September 2020 sideload OTA zip: https://dl.google.com/dl/android/aosp/flame-ota-rp1a.200720.009-6dde3195.zip
DO NOT BOOT BACK INTO O/S UNTIL ALL STEPS ARE COMPLETED - THIS ENSURES EVERYTHING BOOTS BACK UP WITH MAGISK / EDXPOSED ALL RUNNING PROPERLY RIGHT AWAY
1. boot into bootloader
----------------
** I was on custom kernel, so I needed to flash BOTH the stock boot and dtbo images
2. fastboot flash boot flame-qq3a.200805.001-factory-boot.img
3. fastboot flash dtbo flame-qq3a.200805.001-factory-dtbo.img
......* these steps to restore stock recovery; dtbo.img also necessary for some kernel installations.
......* won't hurt to flash both anyway, so if you're unsure, go ahead and do both.
-----------------
4. use volume keys to change selection to boot to Recovery Mode
......- when you reach the android symbol with No Command, hold power button, tap volume up, in case you've forgotten
5. choose option "Apply update from ADB"
6. adb sideload flame-ota-rp1a.200720.009-6dde3195.zip
7. Once the OTA sideload is done, Reboot to bootloader (you'll also notice it's now on the other slot after OTA flashed)
8. fastboot flash boot flame-rp1a.200720.009-magisk_patched-21.0.img
9. done, start the phone
(Optional - Flash custom kernel. If you had a custom kernel, you need to re-flash it)
This is a 100% seamless update that requires no additional / re-setup of any of my Magisk or EdXposed setups. All of the factory files can be found here https://developers.google.com/android/images. boot.img and dtbo.img are in their corresponding full Factory Image zips, and the ota zip is under Full OTA Images.
---------------------------
ADDITIONAL NOTES FROM @sidhaarthm, WHO TESTED FOR ME - THERE'S SOME GOOD INFO HERE TO HELP PREP YOU BEFORE UPDATING YOUR PHONE (NOTE, THIS WAS DONE BEFORE MAGISK MANAGER 8.0.x BECAME STABLE, AND WAS FOR PIXEL 4 XL):
Okay, so I just successfully completed the steps and I'm booted into Android 11 without issues.
Here are my observations, notes and findings:
Pre-requisites:
- I installed the Canary Build of Magisk apk - it basically overwrote the existing installation of Magisk and worked straight away. I remained on the 'stable' update channel.
- I uninstalled all the Accent and Colour Mods from Tulsadiver as he is yet to update the mods for R11 (although he's confirmed its' possible and will publish it soon).
- I also deleted the AK3 Helper module from Magisk that gets flashed with Kirisakura Kernel since I was about to to flash the stock kernel anyway.
- I left the GPay SQlite Fix, Systemless Hosts, Busybox, V4A and AML Modules in Magisk enabled and as is.
Upgrade Notes:
- Followed your instructions to the T and the upgrade process was a breeze.
- I did extract the boot file from the factory ROM and patched it in Canary Magisk myself on my P4XL, but I chickened out at the last minute and flashed the boot file you had provided anyway. Reason being the flashed boot IMG I generated was 33,292 KB vs the one you had provided (and the ones I saw posted in other threads) were all 33,332 KB. So there was definitely some differences there and I just didn't want to risk it at that point.
- The phone got a bit hot during the upgrade process - around 40C+ but I suppose that's alright. Its' cooled down now and running okay.
- I did not flash any Kernel yet since I am waiting for the next official Kirisakura Kernel release for R11.
Findings:
- My P4XL booted first time, no bootloops etc - finalised the upgrade in a couple of minutes and everything thereafter seems smooth as butter.
- GPay works perfect without any tinkering (that's a big plus!)
- Device is rooted and all Root apps (AdAway, TiB etc), all work as normal. Camera, WiFi, Bluetooth, everything works, no issues whatsoever.
- Face Unlock works as normal and so do all the apps that use the biometric API to unlock (banking apps etc).
- SafetyNet fails on ctsProfile (evalType Hardware) but it was the same before upgrading to R11, so not surprised.
- Viper FX doesn't work post upgrading to R11 - that's expected and people have already reported the same 'failed at patching system' error on the main thread. Hopefully we get an upgrade at some point. Really gutted about this one as I love V4A!
Click to expand...
Click to collapse
Big thanks to @sidhaarthm for being an awesome and detailed tester!
-------------------
Issues after updating?
If you end up unable to boot or bootlooping afterwards, you most likely have an old Magisk module that isn't playing nice with the new build. There are 2 main things you can do:
1. Flash the new factory untouched boot image. You will of course lose root, and all modules will be disabled. However, it should at least get you able to boot back up quickly and have a working phone if you're in a bind.
2. I would recommend checking Tulsadiver's thread: https://forum.xda-developers.com/pixel-4/how-to/magisk-modules-disabler-booting-magisk-t3991739
Instead of reverting to stock boot image, fastboot boot (NOT FLASH) Tulsadiver's boot image. This will boot your phone in Magisk Core-Only Mode, with all modules disabled but root retained. From here you can open Magisk Manager and disable suspect modules. Before rebooting, go to Magisk Manager's settings and disable Magisk Core-Only Mode. Once you disable the incompatible module, the phone should boot back up.
- See this post (or thread) for more tips / context / an example: https://forum.xda-developers.com/showpost.php?p=82509691&postcount=16
Coming from an earlier build than August 2020?
Download the September 2020 Full Factory Image .zip file and extract it. BEFORE RUNNING THE FLASH-ALL BATCH / SHELL FILE, EDIT THE FILE AND REMOVE THE "-w" FLAG FROM THE LAST FASTBOOT LINE. If you fail to remove -w, your phone will be wiped when it reaches this step. After flashing the full factory image, your phone will automatically reboot into O/S. From here, reboot back into bootloader, and flash the new Magisk patched boot image.
Since this is a major jump to a new version of Android, I don't want to recommend this yet until someone tests it. If anybody tries this way successfully, please let me know so we can update this part. Thanks!
Link to October 2020 update guide: https://forum.xda-developers.com/pixel-4/how-to/update-root-guide-oct-2020-rp1a-201005-t4175957
P.S.: Yes, I know this is very late to post last month's update, but life has been super busy for me, my wife, and the "new" member of our family <3 <3 <3. Plus, the Pixel 4 is not my phone but my wife's phone, and on top of that I haven't updated either of us to Android 11 yet. I really wanted to make sure I wasn't leading everyone who follows my guides into bootloop / bricking hell, so along with the help of a great tester and an abundance of caution, I only released the September guide for the Pixel 4 XL. Then I just never got around to doing the same for the Pixel 4. Whoops, my bad. Anyway, there's some great news brewing on the GravityBox scene, and hopefully I'll be updating our phones in the near future and I can get back on top of these guides without worrying that there may be any issues that I can't help out with, not having performed the upgrades myself.
Anyway, enjoy! And please let us know if you have any issues.
i5lee8bit said:
Link to October 2020 update guide: https://forum.xda-developers.com/pixel-4/how-to/update-root-guide-oct-2020-rp1a-201005-t4175957
P.S.: Yes, I know this is very late to post last month's update, but life has been super busy for me, my wife, and the "new" member of our family <3 <3 <3. Plus, the Pixel 4 is not my phone but my wife's phone, and on top of that I haven't updated either of us to Android 11 yet. I really wanted to make sure I wasn't leading everyone who follows my guides into bootloop / bricking hell, so along with the help of a great tester and an abundance of caution, I only released the September guide for the Pixel 4 XL. Then I just never got around to doing the same for the Pixel 4. Whoops, my bad. Anyway, there's some great news brewing on the GravityBox scene, and hopefully I'll be updating our phones in the near future and I can get back on top of these guides without worrying that there may be any issues that I can't help out with, not having performed the upgrades myself.
Anyway, enjoy! And please let us know if you have any issues.
Click to expand...
Click to collapse
thanks mate ive been waiting for this!! i did not feel like accidentally bricking or doing factory clean/. i followed the guide exactly and i updated all magisk modules to latest versions available and downloaded latest xposed canary yahfa. everything working buttery smooth with no hic cups at all. thank you for continuing to make thes guides :good::good::good:
also happy to report the magiskprophide module seems to be working for me and i pass safetynet! i will also take your advice and wait a bit before ota ing to october build. thanks again mate!
strange issue after updating...
i5lee8bit said:
Link to October 2020 update guide: https://forum.xda-developers.com/pixel-4/how-to/update-root-guide-oct-2020-rp1a-201005-t4175957
P.S.: Yes, I know this is very late to post last month's update, but life has been super busy for me, my wife, and the "new" member of our family <3 <3 <3. Plus, the Pixel 4 is not my phone but my wife's phone, and on top of that I haven't updated either of us to Android 11 yet. I really wanted to make sure I wasn't leading everyone who follows my guides into bootloop / bricking hell, so along with the help of a great tester and an abundance of caution, I only released the September guide for the Pixel 4 XL. Then I just never got around to doing the same for the Pixel 4. Whoops, my bad. Anyway, there's some great news brewing on the GravityBox scene, and hopefully I'll be updating our phones in the near future and I can get back on top of these guides without worrying that there may be any issues that I can't help out with, not having performed the upgrades myself.
Anyway, enjoy! And please let us know if you have any issues.
Click to expand...
Click to collapse
Thanks again! I do have a strange issue after updating that hasn't happened before and I can't seem to track down. Updated per instructions, same as I do pretty much every month, however this time (I use the 3 button home buttons) my home and task button don't work. They flash to indicated that I have pressed them, but no luck. Also noticed that dark theme is not holding after reboot... No issues popped up during install. Tried process a second time, again no issue, same deal. Also tried booting into safe mode and the issue is in safe mode as well...anything else to try before wipe and reset? I don't believe its related to this process, just hoping someone has any ideas or experienced this after the latest update...I just can't seem to find anyone having the same issue...
JakeKane08 said:
Thanks again! I do have a strange issue after updating that hasn't happened before and I can't seem to track down. Updated per instructions, same as I do pretty much every month,
1) however this time (I use the 3 button home buttons) my home and task button don't work. They flash to indicated that I have pressed them, but no luck.
2)Also noticed that dark theme is not holding after reboot...
3) No issues popped up during install. Tried process a second time, again no issue, same deal. Also tried booting into safe mode and the issue is in safe mode as well...anything else to try before wipe and reset? I don't believe its related to this process, just hoping someone has any ideas or experienced this after the latest update...I just can't seem to find anyone having the same issue...
Click to expand...
Click to collapse
1) We still haven't updated to Android 11, so unfortunately I'm not sure if I can be of much help. Actually, I hate gesture navigation and plan to use 3-button myself, so hopefully this doesn't happen to us, lol. I would start with something simple and quick - try to toggle 3-button navigation off (system, settings, navigation option or wherever it is), then back on. Maybe try rebooting in between? Then of course see if there are any modules (Magisk or Xposed) that may be messing with the setting. I would think GravityBox, but it isn't compatible with Android 11 yet... If you have EdXposed, try disabling the module to disable Xposed and see if it still happens. If that still doesn't work, perhaps try booting into Magisk core-only mode, or just flash the stock boot and dtbo images (for the current month you're on) for testing to see if it works, then flash the magisk-patched boot image again afterwards to re-root. Maybe booting non-rooted / all modules disabled will easily tell you if the problem is an uncooperative module.
2) Actually, I've had this issue since as long as I can remember in owning the device (well, on my P4XL, and also happens on my wife's P4). We both have the setting for auto dark mode (morning / evening auto setting). We're still both on Android 10 and it does the same thing. If it's on dark mode and the phone is rebooted, it boots back into light mode. We would have to toggle it back manually. However, I do believe it does automatically switch to dark theme on the next scheduled time/day. Yeah, it's been like that for literally as long as I can remember, unfortunately. Kinda annoying but meh, whatever.
I'm also not sure what happens if you follow the guide twice, only because you would already be on the current month, then flashing the previous month's boot/dtbo images, and OTA'ing to what you're already on. I doubt it would permanently break anything though, but maybe try flashing your current build's dtbo image just to be safe? Not sure if the OTA directly updates the dtbo partition. For example:
Round 1: You follow my guide for September update. You are currently on August build. You are flashing the stock August boot / dtbo images to revert recovery to stock for your current patch level, then flashing the September OTA. You are now on all September images. You then flash the Magisk patched September boot image to re-root.
Round 2: You follow the guide again. You are already on September build, yet you're flashing the August boot / dtbo images to revert recovery to stock - but for a month back. See what I'm saying? But at least you said you got no errors. I would assume the 2nd round of following the guide didn't hurt anything, but this is also why I say maybe try flashing the stock dtbo image for the current month you're on.
Good luck! Let me know how it turns out. Still waiting to update, and having working 3 button navigation is a MUST for both my wife and I! Not trying to have an Apple Pixel here.
i5lee8bit said:
1) We still haven't updated to Android 11, so unfortunately I'm not sure if I can be of much help. Actually, I hate gesture navigation and plan to use 3-button myself, so hopefully this doesn't happen to us, lol. I would start with something simple and quick - try to toggle 3-button navigation off (system, settings, navigation option or wherever it is), then back on. Maybe try rebooting in between? Then of course see if there are any modules (Magisk or Xposed) that may be messing with the setting. I would think GravityBox, but it isn't compatible with Android 11 yet... If you have EdXposed, try disabling the module to disable Xposed and see if it still happens. If that still doesn't work, perhaps try booting into Magisk core-only mode, or just flash the stock boot and dtbo images (for the current month you're on) for testing to see if it works, then flash the magisk-patched boot image again afterwards to re-root. Maybe booting non-rooted / all modules disabled will easily tell you if the problem is an uncooperative module.
2) Actually, I've had this issue since as long as I can remember in owning the device (well, on my P4XL, and also happens on my wife's P4). We both have the setting for auto dark mode (morning / evening auto setting). We're still both on Android 10 and it does the same thing. If it's on dark mode and the phone is rebooted, it boots back into light mode. We would have to toggle it back manually. However, I do believe it does automatically switch to dark theme on the next scheduled time/day. Yeah, it's been like that for literally as long as I can remember, unfortunately. Kinda annoying but meh, whatever.
I'm also not sure what happens if you follow the guide twice, only because you would already be on the current month, then flashing the previous month's boot/dtbo images, and OTA'ing to what you're already on. I doubt it would permanently break anything though, but maybe try flashing your current build's dtbo image just to be safe? Not sure if the OTA directly updates the dtbo partition. For example:
Round 1: You follow my guide for September update. You are currently on August build. You are flashing the stock August boot / dtbo images to revert recovery to stock for your current patch level, then flashing the September OTA. You are now on all September images. You then flash the Magisk patched September boot image to re-root.
Round 2: You follow the guide again. You are already on September build, yet you're flashing the August boot / dtbo images to revert recovery to stock - but for a month back. See what I'm saying? But at least you said you got no errors. I would assume the 2nd round of following the guide didn't hurt anything, but this is also why I say maybe try flashing the stock dtbo image for the current month you're on.
Good luck! Let me know how it turns out. Still waiting to update, and having working 3 button navigation is a MUST for both my wife and I! Not trying to have an Apple Pixel here.
Click to expand...
Click to collapse
Sorry for the late reply and confusing with versions I was actually working with September images the entire time. I hadn't actually flashed back August images. After I installed the September OTA and it didn't work, I applied the entire September image to see if something in the OTA broke. No luck there either. I ended up backing everything up and performing a system wipe/recovery. Happy to report that all is working and actually working much better than before. Device is quite snappy and battery has improved, I find that at the end of the day I have about 10-15% more battery than I had before. I'm sure that this is probably due to less bloat and/or something was definitely not working right on the system.
I have my pixel 7 rooted and I cannot get automatic updates. What would be the best way for me to get updates on my system? Going by the name I'd guess the pixelflasher is used, but I honestly just don't want to brick my Christmas gift so I'm asking for any guidance I can get.
scuzzo500 said:
I have my pixel 7 rooted and I cannot get automatic updates. What would be the best way for me to get updates on my system? Going by the name I'd guess the pixelflasher is used, but I honestly just don't want to brick my Christmas gift so I'm asking for any guidance I can get.
Click to expand...
Click to collapse
You can update any way you want. You might find sideloading the OTA to be easiest.
The only way you can "accidentally" brick your device is if you break the bootloader by flashing the wrong image...but if you're not sure what that means, you probably shouldn't be attempting this anyway.
.
I'm pretty familiar with rooting and updating. If you look at my post history you can verify I've been working with root since Droid x2. I'm currently typing this on a one plus 7 pro I converted to gm1925. However, each platform has its specific issues and every new version of Android can be different. I don't have twrp to backup and I want to make sure I don't brick what, to me, is a significant financial investment. I'm just asking to understand what other individuals feel is best practices.
scuzzo500 said:
I'm pretty familiar with rooting and updating. If you look at my post history you can verify I've been working with root since Droid x2. I'm currently typing this on a one plus 7 pro I converted to gm1925. However, each platform has its specific issues and every new version of Android can be different. I don't have twrp to backup and I want to make sure I don't brick what, to me, is a significant financial investment. I'm just asking to understand what other individuals feel is best practices.
Click to expand...
Click to collapse
I personally update using PixelFlasher and the factory image each month. Others prefer sideloading the OTA. Yet others restore the boot image and take automatic OTAs.
It's completely up to you. Again, the only way you'll brick your device is by doing something stupid such as flashing the wrong image to the bootloader partition. As long as the bootloader functions and you can interact with the device via ADB, it's not bricked and is recoverable
V0latyle said:
I personally update using PixelFlasher and the factory image each month. Others prefer sideloading the OTA. Yet others restore the boot image and take automatic OTAs.
It's completely up to you. Again, the only way you'll brick your device is by doing something stupid such as flashing the wrong image to the bootloader partition. As long as the bootloader functions and you can interact with the device via ADB, it's
Click to expand...
Click to collapse
I still haven't put the phone into regular use because I want to make sure I can keep root while updating. I just cannot stand ads. I'll start reading up on pixelflasher and get a good feel for it. Thank you for the help.
I definitely bet on Pixelflasher. It is idiotproof and very handy.
I like sideloading OTA's when I'm stock. A couple commands from any device with current platform tools and it's done. It's also arguably the documented "Google way". Different strokes for different folks I guess...
Thank you to everyone. I've muddled through pixel flasher and I have updated to TD1A.221105.001. Now I'll jump in the pixelflash thread and ask a few questions.
H
scuzzo500 said:
I have my pixel 7 rooted and I cannot get automatic updates. What would be the best way for me to get updates on my system? Going by the name I'd guess the pixelflasher is used, but I honestly just don't want to brick my Christmas gift so I'm asking for any guidance I can get.
Click to expand...
Click to collapse
I have just updated mine without problems:
1.Open magisk an disable modules.
2.Press uninstall magisk - restore images (DO NOT REBOOT)
4.Install the ota in settings.
5. IMPORTANT, once finished DO NOT REBOOT, open magisk again and press install- (install to inactive slot (after OTA).
Then reboot and open magisk to enable the modules again. (maybe this is not necessary, to disable and enable, but it´s safer.
NOTE: I have done this with december update, for unknown reason it was impossible to me with november. I that case i had to complete uninstall magisk, use pixel flasher and then flash init_boot
patched again.
oscarcam said:
H
I have just updated mine without problems:
1.Open magisk an disable modules.
2.Press uninstall magisk - restore images (DO NOT REBOOT)
4.Install the ota in settings.
5. IMPORTANT, once finished DO NOT REBOOT, open magisk again and press install- (install to inactive slot (after OTA).
Then reboot and open magisk to enable the modules again. (maybe this is not necessary, to disable and enable, but it´s safer.
NOTE: I have done this with december update, for unknown reason it was impossible to me with november. I that case i had to complete uninstall magisk, use pixel flasher and then flash init_boot
patched again.
Click to expand...
Click to collapse
There is no problem if you install the last update without having installed the previous updates?
alsansan said:
There is no problem if you install the last update without having installed the previous updates?
Click to expand...
Click to collapse
If It's an OTA, i supose there is no problem. If the system gives you the option. Otherwise you can avoid previous justo using flasher. If you keep your init_boot patched It's easy to root again once used the flasher.
oscarcam said:
H
I have just updated mine without problems:
1.Open magisk an disable modules.
2.Press uninstall magisk - restore images (DO NOT REBOOT)
4.Install the ota in settings.
5. IMPORTANT, once finished DO NOT REBOOT, open magisk again and press install- (install to inactive slot (after OTA).
Then reboot and open magisk to enable the modules again. (maybe this is not necessary, to disable and enable, but it´s safer.
NOTE: I have done this with december update, for unknown reason it was impossible to me with november. I that case i had to complete uninstall magisk, use pixel flasher and then flash init_boot
patched again.
Click to expand...
Click to collapse
Just followed your instructions and it worked flawlessly. I totally forgot this and figured I would need to reflash each time.
oscarcam said:
H
I have just updated mine without problems:
1.Open magisk an disable modules.
2.Press uninstall magisk - restore images (DO NOT REBOOT)
4.Install the ota in settings.
5. IMPORTANT, once finished DO NOT REBOOT, open magisk again and press install- (install to inactive slot (after OTA).
Then reboot and open magisk to enable the modules again. (maybe this is not necessary, to disable and enable, but it´s safer.
NOTE: I have done this with december update, for unknown reason it was impossible to me with november. I that case i had to complete uninstall magisk, use pixel flasher and then flash init_boot
patched again.
Click to expand...
Click to collapse
Followed your steps. It was easy and worked well.
Thank you
scuzzo500 said:
I still haven't put the phone into regular use because I want to make sure I can keep root while updating. I just cannot stand ads. I'll start reading up on pixelflasher and get a good feel for it. Thank you for the help.
Click to expand...
Click to collapse
I don't understand rooting the phone just to block ads.
Just use Adguard which surpasses any root adblocking abilities.
oscarcam said:
H
I have just updated mine without problems:
1.Open magisk an disable modules.
2.Press uninstall magisk - restore images (DO NOT REBOOT)
4.Install the ota in settings.
5. IMPORTANT, once finished DO NOT REBOOT, open magisk again and press install- (install to inactive slot (after OTA).
Then reboot and open magisk to enable the modules again. (maybe this is not necessary, to disable and enable, but it´s safer.
NOTE: I have done this with december update, for unknown reason it was impossible to me with november. I that case i had to complete uninstall magisk, use pixel flasher and then flash init_boot
patched again.
Click to expand...
Click to collapse
I thought the problem here was that the patching from magisk doesn't back up the boot_init (Yet). If I recall correctly pixel flasher ensured the backup being there.
That would mean next time the attempt to restore images might fail again. Unless if this issue of magisk has already been addressed. I didn't check.
fivefour said:
I don't understand rooting the phone just to block ads.
Just use Adguard which surpasses any root adblocking abilities.
Click to expand...
Click to collapse
That's because you don't root just to block adds.
oscarcam said:
That's because you don't root just to block adds.
Click to expand...
Click to collapse
I know plenty of other uses of root, I have developed several root apps and maintained various kernels over the years.
Read what I quoted.
I read, but I didn't understand the same. Sorry.