CF Auto-Root problem - Samsung Galaxy J7 Prime / J7 On NXT (Exynos7870)

Greetings all
Having this problem after flashing the CF Auto-Root file. The error message "verification failed" displayed when the flashing is complete and reboot. Anyone knows what is missing?
Thanks.

Factory Reset to Pass Verification after Rooting, if you want to revert the Process you must ReFlash stock Firmware

OK now as you suggested. TQ.

greeny187 said:
Greetings all
Having this problem after flashing the CF Auto-Root file. The error message "verification failed" displayed when the flashing is complete and reboot. Anyone knows what is missing?
Thanks.
Click to expand...
Click to collapse
just reroot with Odin or flash the stock rom and then re root

Related

E: signature verification failure

I am have a small problem that's a major headache and how someone can help. On my captivate I was having trouble installing the newest version(E:signature verification failure) so I restored via odin3 then tried to root but encountered the same error. So it appears that there is a verification toggle but I don't believe I can do it unless it's rooted. I've also tried master clear also via odin. Any ideas or am i stuck in stock mode for good?
lokidaemon said:
I am have a small problem that's a major headache and how someone can help. On my captivate I was having trouble installing the newest version(E:signature verification failure) so I restored via odin3 then tried to root but encountered the same error. So it appears that there is a verification toggle but I don't believe I can do it unless it's rooted. I've also tried master clear also via odin. Any ideas or am i stuck in stock mode for good?
Click to expand...
Click to collapse
sounds like you downloaded the wrong ODIN3. did you download JI6 or JF6? JF6 will take you back to factory, and JI6 is the leaked FROYO. the leaked FROYO doesnt recovery 2e and you cannot root it the same way you did with 2.1....
that sounds like that could be will try and let you know thank you for the help!
It was the right odin so i'm still stuck.
yeah you were right it was the wrong odin, it had the right name, anyway i'm rooted and ready to install cognition so thanks for the help you rock!

[Q] Restore to stock ROM

Hi, I have a GSM Samsung Galaxy S here that is running CyanogenMod.
The phone is rebooting at random and getting stuck at the skateboarding CyanDroid during boot.
It still runs sometimes and I can flash other roms through clockwork or ROMManager.
How can I restore it to a factory ROM and firmware?
When I try to use *#1234# to find what firmware it has it, it says "Connection problem or invalid MMI code." does that code only work with stock firmware?
Any help or advice would be greatly appreciated.
Thanks,
ANKh
I would use Odin to reflash to a standard Samsung ROM and start again. Maybe first make a backup of all your data, because that will be lost (internal).
Ankhwatcher said:
Hi, I have a GSM Samsung Galaxy S here that is running CyanogenMod.
The phone is rebooting at random and getting stuck at the skateboarding CyanDroid during boot.
It still runs sometimes and I can flash other roms through clockwork or ROMManager.
How can I restore it to a factory ROM and firmware?
When I try to use *#1234# to find what firmware it has it, it says "Connection problem or invalid MMI code." does that code only work with stock firmware?
Any help or advice would be greatly appreciated.
Thanks,
ANKh
Click to expand...
Click to collapse
download the stock firmware from samfirmware.com .. then flash it using odin ..
Go back to stock (can download stock firmware's from sammobile.com) and then flash another rom it could be a problem from the rom itself
Remember to use .PIT file! and check that repartition is ticked.
Shame Heimdell can't also make an image ready for backup later too,
I'd prefer to do that than downloading from some server I've no clue where it's coming from and might do a megaupload at any point
Erakko said:
Remember to use .PIT file! and check that repartition is ticked.
Click to expand...
Click to collapse
What if I have the I9000M_JL2_JL2_JL2_JL2_UG_BMC.zip containing only the I9000UGJL2_homebinary_add_param.tar file?
Is there any need to tick the repartition option?
i think this is a PDA file and it would be ill advised to tick the repartition option.
But I just need to confirm before restoring from JB CM10

Failed to verify whole-file signature

Hello, i want to Flash my S3 mini with the FW XXAMB3 from here. In Odin it works freagt, and after the Phone reboot came the Android Logo an following Error:
Invalid command Argument, failed to verify whole-file signature and signature verification failed.
I tried to wipe the Phone and installed again, but same Error. I downloaded the File again but same Error.
Can anybody help me please?
You have custom recovery with signature verification on?
I have Recovery 6.0.2.7 on the Phone. I switched in Toogle to disabled, but same Problem.
The download in Odin works great, on the Display in the Phone was the green Android and
Downloading... and a blue Line goes from left to right.
And after finished downloading the Phone reboots and here comes the Error.
Trimonium1 said:
I have Recovery 6.0.2.7 on the Phone. I switched in Toogle to disabled, but same Problem.
The download in Odin works great, on the Display in the Phone was the green Android and
Downloading... and a blue Line goes from left to right.
And after finished downloading the Phone reboots and here comes the Error.
Click to expand...
Click to collapse
Flash stock recovery in cwm before odin update and see if that works.
I know that cwm have problems reading the sec_csc.zip that gets extracted upon reboot.
tys0n said:
Flash stock recovery in cwm before odin update and see if that works.
I know that cwm have problems reading the sec_csc.zip that gets extracted upon reboot.
Click to expand...
Click to collapse
Ok, i try it...
Oh yes:good::good::good::good::good:
It workes...
You are my Hero
Thanks so much....
flashing this sec_csc_XXAMBA3-for-cwm.zip - 33.43 MB with cwm should be an easier way

[HELP] Assistance please

I fear i may have bricked my phone...
I was trying to create a custom ROM, set the ROM to wipe data. After i installed the ROM via CWM i got stuck in a boot loop.
I am able to boot into CWM as well as download mode.
Things I've tried:
1) Flashing stock ROM - still boot loop after doing this. It also asks to install an un-trusted package after flashing, not sure what this is.
2) Flash PARAM_I8190.tar.md5 - Still boot loop
3) Restore from backup - Gives me an error "Error while restoring /data!"
I've wiped data, cache, everything... but the boot loop persists.
Any assistance would be greatly appreciated.
have you tried installing pit file with odin
david32*2010 said:
have you tried installing pit file with odin
Click to expand...
Click to collapse
Hey, no i haven't tried that. I remember saving a pit file a while back but can't find it at the moment.
Is there any other way to get one?
Are they device specific?
Thanks,
scabs
there is one on here somewhere
david32*2010 said:
there is one on here somewhere
Click to expand...
Click to collapse
Yeah i found it thanks, do i have to flash the pit file along with the stock ROM?
with stock rom or kernal
Hmmm, okay I've flashed the PIT file at the same time as stock ROM, and still it's stuck in a loop
Okay this is sorted, i flashed stock recovery then re-flashed firmware.
Thanks David for you assistance.

How can i fix this?dm verity verification failed/need to check drk first. please help

I have n910t tmobile note 4 and I have this issue and i cant install ota updates every time i receive ota and i install it failed.also tried odin flash stock firmware but after odin pass phone get error message. but my phone works fine no problem i install twrp and i get rid of this message but whenever i back to stock recovery same massage appears. I dont want to be rooted since i am happy with stock marshmallow. Any suggestions how to fix easily?

Categories

Resources