Database Develop

[ROM] [Stock] [5.1.1]Slim-G530T-AQA2 for Galaxy Grand Prime G530T

Hey guys! Presenting my first custom ROM for this device. Its based on Stock 5.1.1 G530TUVS2AQA2. Called it Slim cause well...its slimmed down.
Features:
1. Debloated (TMO stuff removed and some other stuff can't remember them all)
2. Deodexed
3. Knox Removed
4. Rooted
5. Zipaligned
Version 2
1. Light theming. (more theming will be done in due time...I'm still learning how theming works).
2. Debloated some more
3. Added Samsung Music Player.
4. Added Application Permission manager to Settings app.
5. Removed knox related info from Settings>About screen.
6. Changed bootanimation.
7. Changed Launcher (still touchwiz home but a diferent version from assare's DreamUX rom).
8. Audio rom assare's DreamUX ROM.
9. Added Advanced Reboot
More in a possible future update
What Works:
-Everything does
Bugs:
-None as far as I tested but feel free to report if you find any.
Installation:
1. Download ROM from link below and copy file to your device (internal or external storage)
2. Reboot to recovery.
3. Wipe data, caches, system (the usual stuff). If you're feeling lucky then maybe you can flash without wiping data (not recommended unless you're still on stock).
4. Tap on install (in TWRP) and select downloaded zip file. Swipe to flash.
5. Reboot and enjoy.
Installing Updates
1. Copy new version to sdcard
2. Reboot to recovery
3. Wipe cache and dalvik. Wiping System and Data is not necessary.
4. Flash update zip.
5. Reboot and enjoy. Note that boot after installing an update may take a bit longer than usual.
Downloads
Version 2
Slim-G530T-AQA2-v2
Older version
Slim-G530T-AQA2
Quick Info:
Contributor: L3R0N
ROM OS Version: 5.1.1 Lollipop
Based on: Stock
Credits: @SuperR. for his kitchen
@asarre for the icons, audio and bootanimation from his DreamUX ROM.
@tdunham for his wonderful 'Unified TouchWiz Mods' thread

For G530T ?

lovevietnam said:
For G530T ?
Click to expand...
Click to collapse
Yes.

Those using this ROM I'm working on a small update to
1. Enable init.d (done)
2. Get Viper4Android working with SELINUX set to enforcing. It works but setting it up is hit and miss so i'm holding off till I can get it working without issue. Once its set up it works without issue tho.

Thanks.
I using for 4 days and runs great not bugs.
I hope can you update soon thank you very much

clpi said:
Thanks.
I using for 4 days and runs great not bugs.
I hope can you update soon thank you very much
Click to expand...
Click to collapse
I've enabled init.d but getting Viper4android to run on enforcing SELINUX is the tricky part. It'll work sometimes and sometimes it won't so I've not made an update yet. Other things I've done is enable Advanced Reboot, added Samsung Music Player, debloated a bit more and switched the launcher to the s7 one and added in some build.prop tweaks. Hopefully you'll see a weekend update.

For G530H?????????????

AbdullahZubair said:
For G530H?????????????
Click to expand...
Click to collapse
No. Unfortunately not.

L3R0N said:
I've enabled init.d but getting Viper4android to run on enforcing SELINUX is the tricky part. It'll work sometimes and sometimes it won't so I've not made an update yet. Other things I've done is enable Advanced Reboot, added Samsung Music Player, debloated a bit more and switched the launcher to the s7 one and added in some build.prop tweaks. Hopefully you'll see a weekend update.
Click to expand...
Click to collapse
I will and i hope

clpi said:
I will and i hope
Click to expand...
Click to collapse
Update is coming along nicely and will be uploaded either later today or tomorrow. Check screenshots or some changes made.

L3R0N said:
Update is coming along nicely and will be uploaded either later today or tomorrow. Check screenshots or some changes made.
Click to expand...
Click to collapse
Im going to be revewing

clpi said:
Im going to be revewing
Click to expand...
Click to collapse
Version 2 is uploading. Check OP for screenshots. Link will also be updated in OP when the upload is complete.
Edit: v2 uploaded. Check OP for link.

Question
I have tried to install this several times because it is exactly what I'm looking for. But every time it reboots it freezes on the Samsung logo. Is it possible to install via Odin? Ive found twrp problematic. Thanks.

error 7

not it gives me señal

I have no wifi

OverClock CPU
can this rom allow overclocking the cpu???

[01.03.2019]NEW G935FXXS4ESAE LITE ODEX

.
[ROM]NEW G935FXXS4ESAE LITE ODEX
Only Samsung SM-G935F/FD
1. On the basis of the stock G930FXXS4ESAE
2. Neither the version of the bootloader or modem is not changing
3. Removed a warning about high volume
4. Screen Recorder
5. Turning off the camera shutter
6. Record button in the dialer
7. Removed unnecessary applications
8. Raised the volume on the headphones
9. Removed delay after call
10. Quick Face Unlock Without Swipe (for Google Smart Lock)
11. Fixed a startup's Health
12.Bilingual reboot menu
13. Service codes work
14. Removed all KNOX
15. AppLock
16. The status of the official
17.Rooted Magisk
18.Working Google Pay
19.MoRoKernel-G93X-O-v4.6
20.February security patch
Update [01.03.2019]
NEW G935FXXS4ESAE LITE ODEX
The update of all programs
Fix private mode
Battery fix
Mods
1.Viper Stock/Viper 2.5/
2.Xposed installer/program/
3.Full Photo/full photo no settings/
4.Full date/full date in weather and on lock screen/
5.Removals Programs/removes a program and makes the super light/
yandex
Installation:
1. Be sure that you're on TWRP
2. Download the ROM from the links..
3. Wipe System, Data, Dalvik, Cache.
4. Flash the ROM
5. Reboot and Enjoy.
Credits :
morogoku
UPDATE Magisk-v18.1
after installation,
restart your phone
Download firmware
yandex
androidfilehost
XDA:DevDB Information
G935FXXS3ERLF, ROM for the Samsung Galaxy S7 Edge
Contributors
vova1962
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Testing
Created 2018-09-26
Last Updated 2019-03-01

old
[ROM][Port S9+]RomControl FINAL
live Wallpaper
switching tracks
https://yadi.sk/d/FgEGpfKAgJWr7g

rooted?
EDIT: In your description, number 3 and 12 are the same (about the high volume)
EDIT 2: What apps are removed? Aroma installation to remove more?

nickmax1 said:
rooted?
EDIT: In your description, number 3 and 12 are the same (about the high volume)
EDIT 2: What apps are removed? Aroma installation to remove more?
Click to expand...
Click to collapse
removed applications that can be downloaded from Google play

vova1962 said:
removed applications that can be downloaded from Google play
Click to expand...
Click to collapse
But i can see a bunch off apps in your screenshots that are there (Samsung Health, Svoice etc for example)

nickmax1 said:
But i can see a bunch off apps in your screenshots that are there (Samsung Health, Svoice etc for example)
Click to expand...
Click to collapse
were those apps on the screenshots

vova1962 said:
were those apps on the screenshots
Click to expand...
Click to collapse
yes, picture 5 of 7 for example
---------- Post added at 12:36 PM ---------- Previous post was at 11:58 AM ----------
will you be uploading to another server (androidhost for example) - cant seem to get a stable download from your link

It looks nice, I really would like to know how to mod this recovery button to my actual rom

Thanks for the rom. Next version would be good a aroma option to debloat even more!
Keep up mate!

How does erl1 perform compared to erh1 and erg2?

@vova1962
Can you please add "unlock phone with fingerprint after reboot"?

Nice job, rom installed all is working like a charm thank you :good:
I almost had a heart attack when I saw "updater script" in TWRP for oreo for G930 and also " - Clean internal and external SD Card..."
Luckily it was for G935 and only "clean" (I read clear) omg :laugh::laugh::laugh:

Ubimo said:
@vova1962
Can you please add "unlock phone with fingerprint after reboot"?
Click to expand...
Click to collapse
this firmware already has this
13. Without entering the password after a reboot

@vova1962
LOL, thanks.
Another question, is this the stock kernel? Or a modified kernel (morogoku maybe?).
Is this rom debloated?
You write multi CSC, which CSCs are included?
Can you add zero camera mod?
Other developers recommend not installing magisk during first flash due to problems. It's recommended to flash magisk separately after a reboot.
You are providing two G935FXXS3ERI1 MULTI CSC BTU.zip on androidfilehost, which one is the latest?

Ubimo said:
@vova1962
LOL, thanks.
Another question, is this the stock kernel? Or a modified kernel (morogoku maybe?).
Is this rom debloated?
You write multi CSC, which CSCs are included?
Can you add zero camera mod?
Other developers recommend not installing magisk during first flash due to problems. It's recommended to flash magisk separately after a reboot.
You are providing two G935FXXS3ERI1 MULTI CSC BTU.zip on androidfilehost, which one is the latest?
Click to expand...
Click to collapse
there's one for 930 another 935.
magisk should be updated after installation

Umm I downloaded from Yandex and I deleted 1 empty folder in zip. That's why script was for 930 ? No prob anyway

keeps rebooting when trying to activate buttom mapper in accessibility

did this one die a death?

nickmax1 said:
did this one die a death?
Click to expand...
Click to collapse
I'm rarely home

nickmax1 said:
did this one die a death?
Click to expand...
Click to collapse
dia a death?!? wow little redundend but i get it hahahah

Android P 9.0 for s6e+ BETA

To go into deeper detail on the ROM, I used Lineage 16.0 20180901 s6 build modified for the s6 found here:
https://forum.xda-developers.com/ga...20x-5x-nexusos-9-0-samsung-galaxy-s6-t3843199
It was also based on NexusOS kernel that has been modified, so a big shout out to Team Nexus for the kernel and rom, and to @lukasb06 for porting it to s6.
The original kernel was by Team Nexus for s6 and s6e
Kernel Features;
v2.0: first support Pie on s6e+ and n5
change log:
support N5-s6e+ (ready for daily usage)
bug: BT, GPS, NFC
deep sleep fixed, init.d support, dyninteractive and a lot of kernel code changed.
the kernel can be found at :
https://github.com/slaminger/android_kernel_samsung_exynos7420
**I have made some modifications, added a shim, added code to the init.rc to disable p2p wifi. Moving forward the modifications to the kernel will be done by myself.
Please read and follow the instructions :
New zip uploaded for November. Each month has its own folder
This is not fully functional yet but it is close, no Bluetooth, no NFC. the two buttons next to home don't work yet(a couple of temporary solutions below)
BACK UP YOUR CURRENT ROM! especially efs. Some people have ril issues, I noticed my imei changed. A quick efs restore fixed it and my sim worked again.
The home button can be set to double tap for recent apps and use opera browser for compensation of no back button as they have their own, or download back button from play store to add floating buttons to screen. Some versions have buttons pre installed.
I can get bluetooth not to crash, but it doesn't connect.
Wifi Hotspot not working.
Now that the bad is out of the way.
Install Instructions Below:
The call audio and WiFi works, camera works(lower res for video to 1080), magisk is working but apk requires manual apk install, audio works, headphones, video, gapps, everything I have tried besides the above is OK.
The install is a process, first flash the ROM, then the pie fix, then no NFC, and then flash the boot.
Img and start the ROM. set your WiFi and take a look around, give it a moment to run). After first boot, reboot to twrp and flash gapps. If you do it all at once gapps crash sometimes. Once you have this all set up and good to go then add magisk.
9.0SeptSecurity is a different version from the august security not just in the sense that the security patch is different, but also the august build is N920 where the September build is G920F. One is from a note one from s6. It is possible one might resolve a bug that is in the other for your device, i am honestly not sure. different people report different bugs on the same device. If bluetooth does happen to be in one of the zips it will likely crash a lot. remove it via twrp by mounting system and then going to system/app and delete the bluetooth and bluetoothmidi folders.
The reason for lowering rear camera to 1080p for video is that it gets buggy at the 4k default.
A big thank you to NexusOS and LineageOS for their 9.0 lineage 16.0 s6 ROM which I used as a base to port this to our device!
i would also like to thank @topjohnwu for Magisk.
And @MirzaAwais for the Pie fix zip
Link for zenltecan:
https://mega.nz/#F!vKZ2UIzZ!BRrSiAxmz2DOjGmnkl26uA
Link for zenlte:
https://mega.nz/#F!Peo0FAjL!_eknpYZl8Ih-x2Hr9vSysg
Link for common files to be flashed on every device:
https://mega.nz/#F!yewjES6B!71Yrg0zaIzAys0wjxvMOzA
Link for Noblelte:
https://mega.nz/#F!DH4HSS7I!0MusytbbTqTsnWB6XzR2Bg
Modified RIL fix to disable P2P WIFI (connect droid to droid without internet, this saves battery life)
https://mega.nz/#F!OOwBmCJb!n7zaoutCLw74vsVTmXUjvg
Link for zenltetmo:
https://mega.nz/#F!7D5xhQab!WgqIleQph7goPHVVSVo1lA
New Multirom for note 5 and s6e+
https://mega.nz/#F!es4wnQjI!sCZqFZiJbhQr1BtEKYKzYw
It's a bit slow for the first little bit while setting up and whatnot, but once you get everything running it works fine. You can use kernel auditor if you find your battery is dying a little too fast.
I am VERY open to suggestions and or help with this, as it is my goal to fix the bugs and have a fully working 9.0 for our device. The buttons are a priority for me.
To briefly summarize: you sacrifice the back button, pages button, and Bluetooth and get 9.0. Everything else works. I've got viper4android going via magisk, the audio fx work. The ROM has a LOUD volume. So if you like music, enjoy. The back button/page has a work around(most apps have a back button), and you can get an app from play store called back button which gives you the home, back and recent button as tiny floating screen icons also, in the meantime. so just bluetooth really. Use modified cam perm boot shim.img
Enjoy

I removed Bluetooth from the ROM intentionally because it crashed constantly and was hard to disable for people unfamiliar with twrp. No NFC.
The camera has been modified to address pipeline errors that caused it to not work in other builds, it is now fully functional up to 1080p video.
The advanced menu seems to be working fine.
Magisk successfully installed with the following modules tested: Viper4Android, Sony Framework, Sony Music, Audio Modification Library, Sys Config Patcher.
SUBSTRATUM DOES NOT WORK ON ANDROID PIE. This is because google does not want us using OMS for custom themes. they disabled it on purpose. i do not believe systemless substratum will be possible moving forward on any device running pie. atleast not at the time being.
**** Solved** see next post** Netflix not currently working, I googled and found many users on pie are having issues.
Superuser works also, but magisk has modules.
More details will be coming.

All gapps 9.0 working on sm-g928
W8, I used the full aroma package and installed everything. However pixel launcher with assistant in the search bar will not work if you install the new Google webview. The built in Google now launcher will work, and I have tried Nova launcher prime. Keep in mind the more gapps you install the slower your device can get. it is best to only install what you need. i installed everything just to see what worked. but i noticed my phone was slower after a while.
The camera is only confirmed working on g928w8 Canadian, g928g, g928f international/american, note 5 N 920variants. Others have reported bugs.
Netflix Netflix-6.13.0_build_29940.apk confirmed working, both cast and watching videos.

Congrats! Will this rom work on Note 5 N920C too ?

ThePscho said:
Congrats! Will this rom work on Note 5 N920C too ?
Click to expand...
Click to collapse
It could be made to work yes, there is an alpha note5 ROM already on xda

so i flashed the ROM. very stable i can say, but unfortunately the camera still does not work. i was able to install google camera mod via adb but still the same problem. it does not crash tho. it's just not starting

Dread2000 said:
so i flashed the ROM. very stable i can say, but unfortunately the camera still does not work. i was able to install google camera mod via adb but still the same problem. it does not crash tho. it's just not starting
Click to expand...
Click to collapse
Suggestion: if you un-compress the rom(s) and do a search for *camera or camera* does it return any results. I suggest you compare it to a working version and determine what is missing in the system/ system/app and system/priv-app folder(s) once you determine what is missing then just bring those changes over to your folders

AFFAFXP said:
Suggestion: if you un-compress the rom(s) and do a search for *camera or camera* does it return any results. I suggest you compare it to a working version and determine what is missing in the system/ system/app and system/priv-app folder(s) once you determine what is missing then just bring those changes over to your folders
Click to expand...
Click to collapse
i will give a try but i don't think i'm going to make it

AFFAFXP said:
Suggestion: if you un-compress the rom(s) and do a search for *camera or camera* does it return any results. I suggest you compare it to a working version and determine what is missing in the system/ system/app and system/priv-app folder(s) once you determine what is missing then just bring those changes over to your folders
Click to expand...
Click to collapse
My camera works on SM-G928W8

Dread2000 said:
so i flashed the ROM. very stable i can say, but unfortunately the camera still does not work. i was able to install google camera mod via adb but still the same problem. it does not crash tho. it's just not starting
Click to expand...
Click to collapse
Let me try n rebuild it real quick for your device, its the same phone mine is just zenltecan not zenlte

Its uploading now, I used the same zip from my phone and changed the updater script to zenlte

OK its done, I named it v2, same link as first post

@godkingofcanada Hi, I've got same problem with this rom as I had with Oreo rom before. My WiFi MAC Address is 02:00:00:00:00:00 and it doesn't turn on. Have I to do something more than installing rom and all fixes with it ? I can provide logcat if it would do. Also after clean installation there was no bootanimation and no wallpaper. Just black screen and that's all. Hope to see quick reply. Cheers

aerzjee said:
@godkingofcanada Hi, I've got same problem with this rom as I had with Oreo rom before. My WiFi MAC Address is 02:00:00:00:00:00 and it doesn't turn on. Have I to do something more than installing rom and all fixes with it ? I can provide logcat if it would do. Also after clean installation there was no bootanimation and no wallpaper. Just black screen and that's all. Hope to see quick reply. Cheers
Click to expand...
Click to collapse
What variant of s6e+ do you have? And sure let me peek at the logcat, I have never had it boot to black screen, normally the boot only fails if you did not flash the boot.img. the pie kl500.zip fixes the Wi-Fi, the other zip disables NFC, did you flash both ?

godkingofcanada said:
What variant of s6e+ do you have? And sure let me peek at the logcat, I have never had it boot to black screen, normally the boot only fails if you did not flash the boot.img
Click to expand...
Click to collapse
I did everything from first post apart from installing gapps. Let me grab it, and I will upload here. Thanks for fast reply

aerzjee said:
I did everything from first post apart from installing gapps. Let me grab it, and I will upload here. Thanks for fast reply
Click to expand...
Click to collapse
You are welcome. Also, what country is your phone manufactured in?

godkingofcanada said:
You are welcome. Also, what country is your phone manufactured in?
Click to expand...
Click to collapse
It's G928F variant, I don't have phone box with me, so can't check on it. I bought it here in Poland.

godkingofcanada said:
What variant of s6e+ do you have? And sure let me peek at the logcat, I have never had it boot to black screen, normally the boot only fails if you did not flash the boot.img. the pie kl500.zip fixes the Wi-Fi, the other zip disables NFC, did you flash both ?
Click to expand...
Click to collapse
Logcat took via built-in SysLog app. Hope there's something

aerzjee said:
It's G928F variant, I don't have phone box with me, so can't check on it. I bought it here in Poland.
Click to expand...
Click to collapse
Give me a moment to look, you have the international variant but I don't think there's any hardware differences. I need to verify

godkingofcanada said:
Give me a moment to look, you have the international variant but I don't think there's any hardware differences. I need to verify
Click to expand...
Click to collapse
Also, the phone is identifying itself as SM-N920X is settings, same this was happening with Oreo ROMs. I'll keep this page refreshed once in a while, I hope that you will find something. I've updated bootloader, but I'm not sure if it changes something. Thanks for fast replies

[Update 24/5/2022][Official][Full One Ui 4.1 From Latest A51] LegendaryPixieOS 4.1 For Galaxy M21

Update 1:
1 January 2022 Security Patch Update
Better Picture And HDR Processing
100% Camera Quality Instead Of 95%
Faster Performance Without Special Kernel
All Goodlock Modules Included (Located In /system_root/system/GoodlockModules Or /system/GoodlockModules
More Build.prop Tweaks
Add Bixby Vision
Add More Features
Update 2:
Add Fun Mode
Faster Performance
Add Google Fonty
Add S21 Fingerprint Animations (Thanks @soulr344 )
Add Android Auto
Update Samsung Free Apps
Update 3:
Improve Performance
Radio Crash,Fix Soon
Add New Call Background Preloaded
Single Take Can Be Detect More Objects
Knox Remove So Secret Mode In Samsung Internet Works
Update 4:
1.Voice Recorder Preloaded For Who Need It But It Not Impact Performance
2.Voice Recorder And Radio Fix In M21
3.(M31s,F41,M31 Only)
Full Features Pro Video
4.Your Phone Apps Remove, Install Your Phone Companion App From Play Store To use Link To Windows
5.Better Performance From More Debloated
6.Improved Stablity
7.GoodLock App Pre-install (Not Impact Performance)
8.Initial Galaxy F41 Builds
Update 5:
1.Better Performance And Networking
2.Add New Camera Features (Quick Reviews)
3.Network And Graphics Throttling Fix
4.GameOptimizingServices Remove
5.Faster Google Discover Open
6.Battery Is Little Bit More Drain But Fix After Turn Power Saving On (For Performance)
7.Dialer Crash And Blocking Messages/Call Are Fix
Update 6:
1.Full Features Link To Windows (Open App On PC,Call On PC)
2.Fix Camera Failed When Apply Video Filters
3.Improved Wifi Scan
4.Fix Camera In M21
5.Use 3.6 As Base Again To Prevent Bug And More Smooth
Update 7:
One UI 4.1 Update
Update 8:
Fix Pro Mode On M21
Fix Face Scan Animation
Add Voice Recorder Features
Update 9:
Added Extra Dim
Added Additional Fonts
Improved App Opening Performance
Improved Battery Life
Spoiler: Features
1.Productivity:
Bixby Voice
Bixby Routines
Samsung Free And Google Discover
All Goodlock Modules Working!
Full Features Link To Windows
Link Sharing
Full Features Screen Recorder And Screen Capture
Full Soundalive
Music Share
Quick Share
Call And Text On Other Devices
Continue App On Other Devices
Wifi Calling (Yeah it exist in stock also)
Fun Mode On Camera
More Single Take Detection Features
Quick Review
Switch Lens While Recording Video
S21 Fingerprint Animations
Super Fast Charging Animations When Phone Power Off And Plug in Charger
2.Performance:
Select Processing Speed in Panel
Debloated But Keep Main Features
Low Memory/Ram Usage! (For Me It Use 2.5gb of 6gb)
How To Install:
Download zip
Flash zip in recovery
Flash Magisk (Required)
Go to wipe > advanced wipe > data then wipe to keep file in internal storage or format data if you dont want to keep
Reboot
Finish
Download:
https://drive.google.com/file/d/1ldSlNUNFHrinZEdb-ZEC20I8iOdXgb7Y/view?usp=sharing
Credits:
@BlassGO For Installer
@neel0210 For Kernel i use
https://forum.xda-developers.com/t/build-props-tweaks.4252889/
For Build.prop tweaks
Kernel Sources
GitHub - topser9/kernel_samsung_Exynos9611: Kernel source for the Samsung Galaxy A51/M21/M21s/M31/M31s (Exynos9611) ONEUI3 GSI selinux Permissive MTP Voltage contro Gpu Overclock cpu
Kernel source for the Samsung Galaxy A51/M21/M21s/M31/M31s (Exynos9611) ONEUI3 GSI selinux Permissive MTP Voltage contro Gpu Overclock cpu - GitHub - topser9/kernel_samsung_Exynos9611: Kernel sourc...
github.com
Thanks
Flylarb
*I Wont Accept Any Donations Since I'm Kids And Making Rom Is My Hobby

https://forum.xda-developers.com/conversations/your-phone-number.14509319/#convMessage-14754733
Click to expand...
Click to collapse
Thanks.

Hi Flylarb, do you have the updated Fixpermission.zip file? I wanted to test it on M215G.
I'm not able to login to both telegram or discord for some technical reasons.

OldNoobOne said:
Hi Flylarb, do you have the updated Fixpermission.zip file? I wanted to test it on M215G.
I'm not able to login to both telegram or discord for some technical reasons.
Click to expand...
Click to collapse
Oh
It doesn't need

Thank you for the ROM. I have a stock m21 device, never rooted, never boot unlocked.
You have listed -
Flash zip in recovery - Do you mean the stock recovery? Do I need to do boot unlocked or something for this work?
Do you want me to flash the zip file directly from stock recovery on my untouched device?
@Flylarb​

abhi_1245 said:
Thank you for the ROM. I have a stock m21 device, never rooted, never boot unlocked.
You have listed -
Flash zip in recovery - Do you mean the stock recovery? Do I need to do boot unlocked or something for this work?
Do you want me to flash the zip file directly from stock recovery on my untouched device?
@Flylarb​
Click to expand...
Click to collapse
Twrp need

Hello, could you share your "camera-features.xml" files for M21 - A41 ... I want them to review and compare with my device

Mon Autre Monde said:
Hello, your link is not working, i want the "camera-feature.xml" file
Click to expand...
Click to collapse
Wait
I will update the link

Hmm, looks yummy (love the : Faster Performance Without Special Kernel, part !) many thx for your hard work sir, i've flashed a custom rom / kernel, albite boosting performance, the kernel changed my device name to m21 shark.. something, which is inconvenient, cuz i cant re-install some native apps like smarthing..
Do i need to re-flash vanilla rom before i proceed with your rom, or do i just follow your instructions ?
Cheers
Also, a big yesssss to future updates, i dont mind bying you some beers, for them.
some debloated version, would be definitely appreciated. i have the 4gb ram version.

Gone ahead and tried to install, got error bout Digest verification failed.

Atrosincity said:
Gone ahead and tried to install, got error bout Digest verification failed.
Click to expand...
Click to collapse
Skip it

Atrosincity said:
Hmm, looks yummy (love the : Faster Performance Without Special Kernel, part !) many thx for your hard work sir, i've flashed a custom rom / kernel, albite boosting performance, the kernel changed my device name to m21 shark.. something, which is inconvenient, cuz i cant re-install some native apps like smarthing..
Do i need to re-flash vanilla rom before i proceed with your rom, or do i just follow your instructions ?
Cheers
Also, a big yesssss to future updates, i dont mind bying you some beers, for them.
some debloated version, would be definitely appreciated. i have the 4gb ram version.
Click to expand...
Click to collapse
Thats whats great about Flylarb dev, he doesnt accept donations but he still building ROMs n stuff..Great job

indirme bağlantısı çalışmıyor

link is broken

Device: M215F
ROM Version: 3.3
Using this rom from last one week, so far the experience is good. The rom is very smooth and no crashes at all, the rom is full of lot of flagship features which are not part of M21's stock rom. WIFI Calling, Link to Windows, Dual Messenger, AppLock access and other stuff are working perfectly and top of that It comes with the latest security patch which is a great thing. WIFI, and Bluetooth audio is working flawlessly. The UI is smooth and fast as much as stock experience.
Comparing battery backup of this rom with stock is not justice. However, one full recharge gives you upto 24 to 42 hours of good backup, where WIFI was active all the time and use WhatsApp, EMail, Telegram and other texting applications.
The Only thing I was missing in this rom was the Samsung's built-in "Manage App Data" feature but I believe it has been removed by Samsung itself in Android 11. Still, one should definitely give it a try to experience the joy of a good custom rom.
Dear @Flylarb you did a great job!!

hey, can i use this firmware on sm-m215f?
should i unlock oem and enable usb debugging?

PRWR said:
hey, can i use this firmware on sm-m215f?
should i unlock oem and enable usb debugging?
Click to expand...
Click to collapse
You Need To Unlock BL
And Install TWRP With OEM Unlock Had To On

Atrosincity said:
Hmm, looks yummy (love the : Faster Performance Without Special Kernel, part !) many thx for your hard work sir, i've flashed a custom rom / kernel, albite boosting performance, the kernel changed my device name to m21 shark.. something, which is inconvenient, cuz i cant re-install some native apps like smarthing..
Do i need to re-flash vanilla rom before i proceed with your rom, or do i just follow your instructions ?
Cheers
Also, a big yesssss to future updates, i dont mind bying you some beers, for them.
some debloated version, would be definitely appreciated. i have the 4gb ram version.
Click to expand...
Click to collapse
No Need To Flash Vanilla Rom Before
Just flash it in recovery (follow instructions)
It have less ram usage a little bit but i will improve performance without debloat too much
Thanks
Flylarb

OldNoobOne said:
Thats whats great about Flylarb dev, he doesnt accept donations but he still building ROMs n stuff..Great job
Click to expand...
Click to collapse
My Hobby Tho

Hello, the download link is not working right now. This is fine?

[ROM][OFFICIAL][PORT][ONE UI][ONE UI 4.1][M31s]Taur OS

TaurOS
Samsung Galaxy A51 Port For Samsung Galaxy M31s
Full One UI 4.1 Built From
(PDA/CSC/CP/AP)
1.0 Beta - A51(A515FXXU5FVG3) for M31s(M317FXXS3DVF3)
1.03b Beta - A51(A515FXXU5FVG3) for M31s(M317FXXU3DVH2)
2.0 Beta - S21(G991BXXS5CVHI) FOR M31s(M317FXXU3DVH2)
Status of One UI 5 and newer -
I had successfully built One UI 5 ports, but the only problems remains that I couldn't get the bluetooth to get it working, due to changes done in android 13. I was only able to get call audio working on BT but every other type of audio comes through speakers only. If you have any known fix for that, please share.
Last Update-
I have given my M31s Away, so I am not doing any development. The truth is I have a lot of work to do in my life. I started this project because no one was willing to make a port for my device. But now the responsibilities of my life have caught upto me. I can no longer continue. I will/have uploaded the last stable port I had completed for usage. You are welcome to try and improve on it too.
This project has come to an end.
Besides, I have seen some spectacular AOSP projects for all Exynos 9611 devices by a user on telegram. Feel free to search.
Special thanks to @rufusIR and @Flylarb
Legacy Features Tracker A51 2nd Post
Downloads 3rd Post
Miscellanous 4th Post
Feature Tracker S21 5th Post
6th Post
Kernel sources - No kernel is included.

Legacy Feature Tracker-
V1.0 Beta
July 01, 2022 Security Patch Update
Faster Performance Without Special Kernel
Full One UI A51 Port
All Basic A51 Features
No Secure Folder
Basic Bixby Voice
Dual Speaker
Dolby Atmos on Speakers
Basic Working Camera
Solid Performer with Emphasis on Features
Full Good Lock Support
Galaxy Enhance-X Support
CSC Tweaks
Floating Feature Tweaks
BuildProp Tweaks
High End Animation
Smooth Multi-Tasking
Google as well as Samsung Free Zero Page
Enhanced Processing Support
Link To Windows Service
Realtime Network Speed
The ROM seems to be stable, currently using it. (I don't like GSI's unstability and ONE UI Core's lesser features)
V1.03b Beta
Built from Scratch
Removal of Dual Speaker
More Bloat Removed
More Tweaks thanks to @Flylarb and Rufus
S21Ultra Photo Editor with Object Eraser, Shadow Remover and Reflection Remover
More Camera features(UHD24, FHD24 recording for back Camera, FHD60 for front, some other for Camera, Pro Video) thanks again @Flylarb
Detail Enhancer in camera removed
Transparency Removed
Upcoming-
Bugs-
V1.03b Beta
On-Screen Fingerprint animations instead of the side fingerprint (Intentional) (A51, S21)
Slight stutters at random (See HKTweaks section in 4th post and S21 Low Resolution tip)
Updating Samsung Capture from Galaxy Store breaks screenshot toolbar, not affecting screenshots.(A51, S21)
Remaster Photo doesn't work in Gallery(A51, S21)
Camera Might crash, so clear all of it's data from settings(A51, S21)
Work Profile Doesn't Work, use multiple users instead(A51, S21)
VoWifi not working(Fix included in instructions)(Unfixable in S21 Port)
HDR10+ in camcorder does not work, disable it.
Screenshots for V1.03b-

Downloads -
1.0 Beta Released on September 11, 2022 at 00:26 IST
Link: https://drive.google.com/file/d/1mJvn3f9N7El1BwnK89-zt8FR7Ai4qtCv/view?usp=share_link no support
V1.03b Beta Released on October 30, 2022 at 02:01 IST
Link : https://drive.google.com/file/d/13Dvuiz1ehKfUIPjMLUSwHAM3a5klED6A/view?usp=sharing
V2.0 Beta Released on June 20, 2023
Link : Super - https://drive.google.com/file/d/1dihPRgWM8-fXQXFhQSjkzmW9rS-2pLAC/view?usp=sharing
optics_prism (If you are feeling lucky, not recommended) - https://drive.google.com/file/d/1f3lSdEE23tcff_HZG7Ig09YEBAI-2vW9/view?usp=drive_link

Miscellanous -
Install Instructions -
Extract Super.img from zip file, flash it as super in TWRP. super.img size around 7.5GB
Will need a SDCard, preferably 16GB, if not then use ADB push command to transfer to internal storage in TWRP.
Flash Magisk apk
Goto Terminal and enter multidisabler. hit enter
Factory Reset your Phone, Take backup before hand if You need.
Follow the following steps for other things.
They are recommended for the best experience.
Included in Downloads sections on XDA, is also prism.img in another zip, extract and flash it to prism to stop bloatware from being installed by Galaxy Store.
Place the provided CSC features xml in the apropriate directory as mentioned below.
Safetynet Fix - (Only for A51)
Use SafetynetFix : https://github.com/kdrag0n/safetynet-fix
Use MagiskHide Props Config : https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf
1. Open termux and get root permissions
2. type props and press enter. Props Config will open up.
3. Select option 1.
4. then enter "samsung/a51nsxx:12/SP1A.218012.016/A515FXXU5FVG3:user/release-keys" as the device fingerprint, word by word, case by case, slight change will not allow safetynet pass.Copying causes issues.
5. Install safetynet fix as well
6. reboot
7. Check safetynet.
Safetynet Fix - (Only For S21)
Just install Safetynet fix and use deny list in Magisk. You are good to go.
CSC Tweaks -
Use any Root explorer. I prefer Mixplorer. Link:https://forum.xda-developers.com/t/...-featured-file-manager.1523691/#post-23109280
Copy the cscfeature.xml to /optics/configs/carriers/XXX/conf/system/ after replacing the old one. XXX is the code for your country. Example SER is for Russia. Reboot and enjoy
Performance Fix -
Need Root
Install hktweaks v2.2.2 :https://github.com/corsicanu/hKtweaks/releases
Give root permission
Click on burger icon in the bottom left corner, open GPU section from it.
Goto GPU Power Policy Control and switch it from coarse_demand to always_on.
Low Resolution Tip-
The GPU is not able to handle the load of heavy graphics, that is the reason of stutters in the OS. In S21, using the system in HD+ resolution allows minimal stuttering and good Performance.
VoWifi Fix-
Download com.sec.sve.apk from 3rd post.
paste it in /system/app/
Unlocking more features in ONE UI 4.1
Install LSPosed.zip from Magisk and then download Firefds kit for S.
Now, enable things as you wish.
Running Banking Apps easily-
Some Apps will detect Root with safetynet fix. Use Secure folder for them. It has been tested for Vyom app.
BHIM will need Denylist, so will any other UPI app to run out of secure folder along with safetynet fix.
Bootloader Unlock Warnig Fix -
Flash BL_unlock_warning_fix_m31s_M317FXXS3DVF3.tar on BL slot in download mode in Reboot Menu, TWRP via Odin on PC. Check 2nd Post.
Tested on M31s-INS (BL version-M317FXXS3DVF3)

Feature Tracker for S21 Port-
V2.0 Beta
Change base to S21
Ultra debloat
Carry over of previous tweaks.
Secure Folder fixed
Screen Resolution options
Using Stock Camera features for Stability
Enabled Super Fast Charging
Samsung Dex working on PC with and without cable
Bugs
On-Screen Fingerprint animations instead of the side fingerprint (Intentional)
Slight stutters at random (See HKTweaks section in 4th post and S21 Low Resolution tip)
Updating Samsung Capture from Galaxy Store breaks screenshot toolbar, not affecting screenshots.
Remaster Photo doesn't work in Gallery
Camera Might crash, so clear all of it's data from settings
Work Profile Doesn't Work, use multiple users instead or Secure folder
VoWifi not working(Unfixable in S21 Port)
Restoring form TWRP Backup can cause issues with password, Remove the lockscreen password and delete all locksettings* files in /data/system/ to set a password after restore.
Stability issues after TWRP restore
Uncertain Smart View Working

Reserved

Can We Use This Rom On M31

Haven't tested yet.

hemant.ch said:
Can We Use This Rom On M31
Click to expand...
Click to collapse
See previous post

Khushtaur3123 said:
Feature Tracker-
1.0 Beta
July 01, 2022 Security Patch Update
Faster Performance Without Special Kernel
Full One UI A51 Port
All Basic A51 Features
No Secure Folder
Basic Bixby Voice
Dual Speaker
Dolby Atmos on Speakers
Basic Working Camera
Solid Performer with Emphasis on Features
Full Good Lock Support
Galaxy Enhance-X Support
CSC Tweaks
Floating Feature Tweaks
BuildProp Tweaks
High End Animation
Smooth Multi-Tasking
Google as well as Samsung Free Zero Page
Enhanced Processing Support
Link To Windows Service
Realtime Network Speed
The ROM seems to be stable, currently using it. (I don't like GSI's unstability and ONE UI Core's lesser features)
Upcoming-
S20Ultra Photo Editor with Object Eraser, Shadow Remover and Reflection Remover
Bugs-
1.0 Beta
On-Screen Fingerprint animations instead of the side fingerprint
Slight stutters at random
Runs better with Enhanced Processing at Maximum
Remaster Photo doesn't work
Samsung Pass, Alive Zoom, secure folder doesn't work
Phone needs a 1 minute breather after Reboot
Detail Enhancer in camera causes Reboot
Some apps don't have proper aspect in landscape, leaving space around camera
Updating Samsung Capture from Galaxy Store breaks screenshot toolbar, not affecting screenshots.
PS : AyOS Theme from Hex Installer
Edit: Removed AyOS Theme, Stock OS Image with Custom Font SonySketch added
Click to expand...
Click to collapse
Is it possible to change the model name from A515F to M317F?

Anikroyale said:
Is it possible to change the model name from A515F to M317F?
Click to expand...
Click to collapse
why? A51's fingerprint allows more apps like GoodLock to be installed.

It works in m31 ?

Angelillo15 said:
It works in m31 ?
Click to expand...
Click to collapse
No...it does'nt work on m31.

hemant.ch said:
No...it didn't work on m31.
Click to expand...
Click to collapse
He was asking.

Khushtaur3123 said:
He was asking.
Click to expand...
Click to collapse
Please Develop This Rom For M31 Also...

hemant.ch said:
Please Develop This Rom For M31 Also...
Click to expand...
Click to collapse
Will need a tester.

Khushtaur3123 said:
Will need a tester.
Click to expand...
Click to collapse
I am Ready to test it...

hemant.ch said:
I am Ready to test it...
Click to expand...
Click to collapse
Results??

osama_blythe said:
Results??
Click to expand...
Click to collapse
I am waiting for reply.. @Khushtaur3123

Oh sorry, I thought you were going to test it on M31s. my bad.