Database Develop

Is there anyway to test hardware functions?

I remember (but not for sure) a settings page that gave you the ability to test different sensors and what-not. the reason for my question is because when i make a call the proximity sensor doesnt work, and i wanna know is it because of the rom or anything software related, or is it the sensor itself, since i recently had repair done on the screen.
thanks.

Nobody knows? i got a 30-day warrenty, so if my proximity sensor really isnt working i need to know soon.

I've used an app previously that would display raw readouts from the various sensors in the device, including the proximity and ambient light sensors. Stand by while I try to find what app that was...
In the meantime, you can at least verify that half of the sensor is working by looking at the screen through a digital camera or other phone's camera. The proximity sensors works off of a flashing IR LED that you should be able to see through a digital imaging sensor. The sensor is located to the left and below the speaker.
Also, I believe the application I was using is called "Elixir", and is free on the Market.

Thanks man, great app. everything is working ok now.

[Q] Proximity sensor Issues

Hello i found out my N1 Proximity sensor have issue wen a install 2.3.3 my screen shutoff when i do call and stuck blank screen i have to remove the battery and put the back.
i download Elixir App and doing some test and Sensor only Say "NEAR" I put my hand on the screen still say Near...
/etc/permissions
android.hardware.sensor.proximity.xml
android.hardware.sensor.light.xml
/system/lib
libssensorservice.so
Factory Code Nexus One
#*#0588#*#* Proximity sensor test (no work in my N1)
can i restart the sensor?
can i disable Proximity in DIAL ?
do i need to take tHTC Support N1?
where is the CM3602 on N1?
can i fix my self?

and I have the same problem but no answer :-(
___
http://forum.xda-developers.com/showthread.php?t=707234&highlight=nexus+proximity

Hi,
Have the same issue, too !

hmm, looks like a android 2.3 issue on that one....

The same here. Is there any way to do a downgrade to 2.2? The phone is unusable, I'll have to go back to my old Nokia!!
Also, at the same time, when I plug the earphones on the Nexus, it doesn't detect them and continues playing through internal speaker!! And I suspect that the light sensor doesn't work.
Hasta luego.

Nexus one proximity sensor problem
Hi guys i had the same problem with my phone
and I manage to fix it
I open the phone and check where the proximity sensor was
and clean it with the a spray duster they sell in computer store
I clean the entire phone
put i back together and it was fix
thanks me if it works for you like that

You are lucky,, just opened my phone and cleaned the proximity sensor and light sensor with specialized electronics solutions i borrowed from work and nothing happened,,dont know what to do about it

RE: how to disable proximity sensor
hey there, this is my second post, THIS PLACE IS AWESOME!!! I was able to disable my nexus one proximity sensor using the hex edit method (after granting the app root access) and now a brick to be is no more. thank you to the poster who made the original post and the one who mentioned the way to give hexedit root access. my sensor definition was exactly where he said it would be. the name of course was cm3602 (lowercase, looking for uppercase found nothing) I was able to change hex position 0000323d from 32 to 00 , and poof, no more black screen after dialing or when receiving a call. a temporary solution I was using was to use a bluetooth headset.
Thank you all.

Note8 Sensors error - Any of you faced with?

I have Note8. It has a very strange sensors error, as below:
- All sensors, from proximity sensor, light sensor, to GPS, iris scanner, and all the other sensors do not work at all.
- In the app like Phone INFO Samsung, CPU-Z or AIDA64, in the Sensors section, all sensors do not work.
- The Auto Brightness function does not work (due to the light sensor), the brightness of the AOD screen is also not adjustable.
- When making a phone call and move the phone close to the ear, the screen does not turn off due to proximity sensor.
- Auto Rotation function is not working (due to rotation sensor).
- Google Maps shows inaccurate location. Other apps that rely on GPS (such as the speedometer app) are completely not working.
- The iris scanner function does not work either.
It was about two weeks ago. I've Wiped the cache, restart the phone but does not make sense.
Yesterday it suddenly returned to normal, I don't know why.
But today - while I'm typing this post - all sensors suddenly do not work again.
Any idea about the error and how to fix it?
Thank you guys

Best advice I can think of is to factory reset and see if that alleviates the problem.

If you did not do anything firmware-related, or you did not drop or submeged your device, the best you can do is to make a warranty claim, pure and simple, if you have no way to make such claim, well, next time you should consider getting a device from an official source

I've read other users have had same problem. Ones I read said it was motherboard issue had to have sammy replace it.

Thank you guys

There is also built-in sensor test. Open dialer and dial *#0*#

I noticed a problem when I was playing Asphalt (racing game on me Note 8). I am unable to use the Tilt controls to move the scar.
Testing out the Sensors using *#0*# at the dialer revealed that all the SENSORS was faulty.
I reset the whole phone just now. The issue is still there with the sensor. As expected Auto rotation doesn't work.
Running the latest version 8.0.
I recently changed my motherboard (under warranty) 3 months back cos something was faulty. Seems it may be another motherboard issue.
Anyone else in this thread solved the issue?

Hey everyone I'm facing the same problem. All sensors stoped working but they were working before on 7.1.1 and i updated my device to oreo and realized all sensors stoped
Then i got another updated for about 900mb i thought maybe this update will fix them and also that update said tha after updating the user cannot downgrade to nougat but after updating the problem still exsist. Please if anyone can help i also try to flash same oreo firmware with odin but doesn't fixed the sensors

[X522] Broken sensors -can i fix it?

Hello i have issue with Le2 x522.
Phone seems to have wrong working sensors.
For now its LSM6DS3 - Its accelerometer and gyroscope
In accelerometer menu X axis seems to be reversed so when i rotate phone on one side screen gets rotated in oposite.
Also orientation sensor looks pretty off.
I have tried google maps trick, also tired MIUI9 diagnostic menu calibration but it didn't work(punched phone few times in area of camera too).
Ended up with reflashing SmallEUI by Auriel(stock kernel) and still its not working.
Any ideas how to solve that issue?

Kiciuk said:
Hello i have issue with Le2 x522.
Phone seems to have wrong working sensors.
For now its LSM6DS3 - Its accelerometer and gyroscope
In accelerometer menu X axis seems to be reversed so when i rotate phone on one side screen gets rotated in oposite.
Also orientation sensor looks pretty off.
I have tried google maps trick, also tired MIUI9 diagnostic menu calibration but it didn't work(punched phone few times in area of camera too).
Ended up with reflashing SmallEUI by Auriel(stock kernel) and still its not working.
Any ideas how to solve that issue?
Click to expand...
Click to collapse
I'm not sure about this method:
in miui 9 thread for le 2 by sagarmakhar, in the 2nd post, it was about volte, but involved a thing about sensors. according to him, wipe persist from his recovery, then flash stock rom and then copy the 'sensors-settings' into /persist/sensors/ (I don't remember the folder now, please refer to that post) and reboot....May work, i don't think that it can brick your device but try at your own risk:fingers-crossed: Good luck

Sensors not detected mi a2

Guys since i installed miui on my mi a2 the SENSORS oficina the phone ( gyroscope, proximity sensor, they all stopped of Worl) , i came back to stock but nothing happened, i can't use automatic Rotation, gyroscope, accelerometter :/ nothing pls help
It's not a hardware problem it's a software problem
Do You have any ideas how could i fix it ? I lost all the ideas