Database Develop

A-Gapps on ZUI 2.1 & ZUI_2.3.045_ST_161013 OTA Update

Hi everyone i managed to use Gapps on ZUI 2.1.0.
In this rom there is not enough space for flash gapps cause of Chinese pre installed apps.
Just clean install ZUI rom.
Install any root file manager like xplore.
Download A-Gapss arm version. http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
Open root file manager and give SU permission.
Navigate to root/system/preload and delete Chinese apps like qq ali maps mail etc, don't delete rest of apps that i attached in screenshot.
Boot in TWRP and flash A-Gapps.
Reboot, Done.
I tried OpenGapps but got bootloop so don't flash any other gapps.
Note I'm not a developer, I'm just sharing this, I'm not responsible if you brick your device, try at your own risk.

ZUI_2.3.045_ST_161013 OTA Update
Hi everyone I managed to flash the latest ZUI 2.3.045 OTA update over ZUI 2.1.049 ROM (http://forum.xda-developers.com/showpost.php?p=68983831&postcount=38 ) via TWRP
Just download this ZUI 2.3.045 OTA update from here... http://www55.zippyshare.com/v/zkaYV93j/file.html
Make a nandroid backup in TWRP...
Flash the OTA zip...
Reboot, Done...
After reboot your TWRP recovery will be replaced by the ZUI recovery, so you need to flash the TWRP img again in FASTBOOT mode to get TWRP RECOVERY... http://forum.xda-developers.com/zuk-z1/development/recovery-twrp-3-0-2-lenovo-zuk-z1-t3358239
Note I'm not a developer, I just did a lots of changes in the updater-script OTA package so it can be flashed via TWRP, Credits goes to ZUI Developers...
Do this at your own RISK...
Update log
Upgrade Aspect
ZUI 2.3, Support for micro-messages read and chat messages to switch to view the message after a key to return to reading position; new location through the function, travel planning, first to wear to see, play to play, PokemonGo machine friends must try; add the bottom of the screen to operate anti-U-Touch misuse function; add more fonts; update Andrews security vulnerability patch; improve system fluency, optimize the heat under the specific circumstances of the problem; Some large and small problem repair. I wish you a pleasant machine.
Precautions:
Support micro-message in the circle of friends and chat interface to quickly switch, go to Settings -> Advanced Settings -> Lab View;
Support location through, can go around the world to catch the elf, go to Settings -> Advanced Settings -> Lab View;
system
Add a variety of fonts;
Update system security patches;
Optimize the bright screen unlock speed;
Optimize the installation and application of the system upgrade system fever problem;
Optimize the system fluency;
desktop
Added dual / multi-finger down flattening desktop icon function;
Repair the desktop folder to display the residual problem;
Optimize the application back to the desktop when the occasional Caton problem;
U-Touch
Optimize U-Touch logic, increase the bottom of the screen when the anti-U-Touch anti-touch function;
small tools
New notes application to support the graphic mixed to share more heart, support the choice of entries, life planning;
File management optimization classification open speed, support Chinese search;
Fix some gadget issues.

I'll be the first to try thanks
*EDIT* flashed successfully via TWRP, booting up now.
*2nd EDIT* as smooth as a silk, thank you buddy, cheers

Hi, how is the network reception on 2.3?? Is it better compared to cm roms?

I don't faced any network issues...
Yes it's better than CM...

I'm trying to install A-Gapps but it says I've already an incomplete installation of gapps.
STRANGE.
Any idea?

Wipe system,
Flash ZUI
Reboot and delete the chinese pre app
Flash A-gapps ARM version (not ARM64)

akshay.mehta9 said:
Wipe system,
Flash ZUI
Reboot and delete the chinese pre app
Flash A-gapps ARM version (not ARM64)
Click to expand...
Click to collapse
It's exactly what I did. Strange.
maybe there's something wrong on the package I'm using (it's pre-rooted) .
Did you use that rom? Z1_CN_OPEN_USER_Q4434.1_M_ZUI_2.1.049_ST_ROOT_160903.zip

Yes I'm using this rom and it's prerooted, try to download the A-gapps package again...

akshay.mehta9 said:
Yes I'm using this rom and it's prerooted, try to download the A-gapps package again...
Click to expand...
Click to collapse
Nothing to do, incredible.
Now I also tried to wipe everything (obviously not system) after deleting preload apps, and nothing! Gapps error because of "old or incompatible gapps currently installed".
STRANGE.

Wipe system and flash ZUI rom...
And do the rest of steps that i mentioned in op...

Is it proper to clean flash ZUI 2.3.045 OTA over DU 10.04 ROM to swith to zui...?

QuazIqbal said:
Is it proper to clean flash ZUI 2.3.045 OTA over DU 10.04 ROM to swith to zui...?
Click to expand...
Click to collapse
Wipe System and data
Flash ZUI 2.1
Then flash ZUI 2.3 OTA

akshay.mehta9 said:
Wipe System and data
Flash ZUI 2.1
Then flash ZUI 2.3 OTA
Click to expand...
Click to collapse
Thank you Brother, flashing was successful. After booting into rom I found speaker sound is missing...
Is there any deblooater script or guide to trim the rom to the bare essentials... I am afraid that my reckless removal of app from system partition might make it unstable...

QuazIqbal said:
Thank you Brother, flashing was successful. After booting into rom I found speaker sound is missing...
Is there any deblooater script or guide to trim the rom to the bare essentials... I am afraid that my reckless removal of app from system partition might make it unstable...
Click to expand...
Click to collapse
Just reboot from power menu to solve speaker sound,

Audio working on it ?
WIFI, Bluetooth ?

VG1115 said:
Audio working on it ?
WIFI, Bluetooth ?
Click to expand...
Click to collapse
Everything is working fine...
You need to reboot after flashing ZUI rom to make audio work...

How is the battery? Can you please provide some screenshot of SOT?

MrWhite98 said:
How is the battery? Can you please provide some screenshot of SOT?
Click to expand...
Click to collapse
Battery life is descent... Better than CM based rom i think...

akshay.mehta9 said:
Battery life is descent... Better than CM based rom i think...
Click to expand...
Click to collapse
Are there any annoying, noticeable bugs persistent?
Thanks!

[ROM][WIP][sGSI][PORT][P] INSTALL Oxygen OS 5.1.0 on Redmi 4 (SANTONI)

THIS IS NOT MY WORK , this is only for sharing purpose and to provide device specific guide.
the real developer of this is- https://forum.xda-developers.com/pr...vice-development/rom-oxygen-os-5-1-0-t3822987
WARNING :I‘m not responsible for any consequences at all. This is an OEM rom port, it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares. I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
WARNING:MAYBE FULL OF BUGS.DONT FLASH IF YOU ARE AFRAID OF THEM.
This ROM is ported from Android P-DP of ONEPLUS 6.
Requirements :
*TREBLE ROM :-[url]https://forum.xda-developers.com/xiaomi-redmi-4x/development/rom-resurrection-remix-t3783793[/URL]
*Redwolf recovery treble supported :-[url]https://forum.xda-developers.com/xiaomi-redmi-4x/development/unofficial-redwolf-recovery-t3776738[/URL]
*OxygenOS_5.1.0.7z :-[url]https://androidfilehost.com/?fid=5862345805528062126[/URL]
*Patchv1 :-[url]https://androidfilehost.com/?fid=5862345805528062110[/URL]
Instructions :
PLEASE BACKUP YOUR DATA
Extract Oxygen Os 7z file anywhere,
Reboot to recovery,
Wipe data,cache,dalvik cache,system,vendor,
Flash RR luis rom 6.1 and boot the rom,
Reboot to recovery,
Backup Rom again with different name,
Now move the extracted Oxygen OS files to WOLF/.BACKUPS/(serial number)/nameofbackup2/HERE,{You need to enable show hidden files in explorer},
In recovery restore only SYSTEM (uncheck everything else),
Flash Patchv1.zip
Wipe DATA,CACHE,DALVIK,
REBOOT SYSTEM.
After boot everything will be weird don't worry enable navigation gestures, hide notch from display settings ,
You can change display size as you want but change it to 350 (from setting/developer setting / small width ) works/looks best , font size as you like.
Getting rid of rounded corners and notch coming soon dev is working on it.
BUGS:
SurfaceFlinger crashes when open Camera, Chrome(use UC),
FingerPrint,
Can't Reboot(use poweroff),
Hotspot(?)
WIFI and bluetooth cannot open at the same time.
WORKING:
VOLTE
Playstore
WIFI
GPS
Navigation Gestures
other apps
Screenshots:[url]https://drive.google.com/drive/folders/1EbjU0H8q5o3vDXzRBo3Yul-gnKn6484F[/URL]
CHANGELOG:
v1review released for testing.
Credits and THANKS TO
@fxsheep for porting
@Swapnil Soni for Recovery
@8224Freak for RR

nice new rom for santoni I hope it would be develop some day keep it up!

JR Bautista said:
nice new rom for santoni I hope it would be develop some day keep it up!
Click to expand...
Click to collapse
It's just a port, so i don't thnik so

Wow . . android P Nice work dev . . tnx for sharing ?

Very nice

Hello,
I am currently using Pixel Experience 9.0 Pie official ROM on my Redmi 4X Santoni.
Is it compulsory to use the RR ROM mentioned in the Guide or As my ROM is already Treble enabled I can flash The Oxygen OS GSI Directly. Or I have to extract it to the Recovery Backup Directory and Then Restore it from the Recovery .

How is GSI support for Xiaomi Mi 9 (cepheus)

We already know this phone is arm64,
the GSI rom AOSP v112 has support for this phone.
But how is the rom behave? What works and doesn't?
How are other GSI flavours doing? Like RR, AEX, HAVOC,....
[NOTE: For those who are interested i'll change this post to some GSI guide cepheus,
as soon as i recieve my Mi 9. But until then i'll hope for some of your feedback]

See this: https://github.com/phhusson/treble_experimentations/wiki/Xiaomi-Mi-9
and these two: https://forum.xda-developers.com/showpost.php?p=79284072&postcount=46, https://forum.xda-developers.com/showpost.php?p=79295919&postcount=53
It shoudn't be needed to write a guide

a video guide would be interesting
I usually used twrp to flash the Gsi file but now I didn't understand what steps should be taken

tried Foloko, RR trebles and it's entertaining as STDs.. couldn't add Gapps for hours and never managed to using 2 very different TWRPs we've got, tons of tricks, or adding stock system/vendor.
I don't understand the assumption "Please don't use third-party custom rom (e.g. Xiaomi.eu roms) as the base rom. Some hacky roms have wrong (unofficial) fingerprint and GSI can't detect what device you are using. ", ok, what should be in the phone then?
After some attempts Phh treble from post 60 installed, greeting me with "There's an internal problem with your device. Contact your manufacturer for details.", some vendor nonsense. After reboot i cannot log in, as fingerprint overrides the letter i need to type the password. omg. So i have to reflash.
update: since Phh was ultra vanilla with literally 2 extra settings, tried RR, same greeting, no fp, and no swipe to apps there, i don't really beg for their modifications as i have Xposed Edge for this. Finally went back to Floko knowing how to fix gapps problem, it's got best navbar solution, although with tons of bugs (contradicting navbar user actions, non responsive gestures, nonresponsive buttons), no tap2wake, AOD sucks, fp sucks too, produces blinking screen.
Looks like trebles are unusable, time to go back to XIAOMI EU... so much for "don't need device specific ROMs".

doggydog2 said:
tried Foloko, RR trebles and it's entertaining as STDs.. couldn't add Gapps for hours and never managed to using 2 very different TWRPs we've got, tons of tricks, or adding stock system/vendor.
I don't understand the assumption "Please don't use third-party custom rom (e.g. Xiaomi.eu roms) as the base rom. Some hacky roms have wrong (unofficial) fingerprint and GSI can't detect what device you are using. ", ok, what should be in the phone then?
After some attempts Phh treble from post 60 installed, greeting me with "There's an internal problem with your device. Contact your manufacturer for details.", some vendor nonsense. After reboot i cannot log in, as fingerprint overrides the letter i need to type the password. omg. So i have to reflash.
Click to expand...
Click to collapse
You have to flash *official* MIUI rom (China or Global depend on your hardware, and it's better to flash developer version to get latest update).
To install GApps, you have to do Wipe -> Advanced wipe -> Select system -> Resize, then Mount -> mount system, then install GApps zip.

dear mod please close this one, there seems to be already a conversation about this

AndroPlus said:
You have to flash *official* MIUI rom (China or Global depend on your hardware, and it's better to flash developer version to get latest update).
To install GApps, you have to do Wipe -> Advanced wipe -> Select system -> Resize, then Mount -> mount system, then install GApps zip.
Click to expand...
Click to collapse
tried to do that, tried to install arm64 Gapps, I'd get an error saying my system is arm, so i install arm gapps, they do get "installed", but when i reboot, there is no gapps at all.
edit: arm64 gapps worked when used LR.Team/wzsx150 twrp.

AndroPlus said:
You have to flash *official* MIUI rom (China or Global depend on your hardware, and it's better to flash developer version to get latest update).
To install GApps, you have to do Wipe -> Advanced wipe -> Select system -> Resize, then Mount -> mount system, then install GApps zip.
Click to expand...
Click to collapse
which Global please? this is the link http://en.miui.com/download-361.html claiming to be Full Rom, but the zip is similar to EU version, just a patch.. just tried it, then flashed EU and magisk and getting "can't connect to camera". i was thinking i need to flash some bigger package (.tgz file), but there's none published and going throught the million childish looking forums on eu.miui.com, not sure.. would like TWRP way. perhaps format system?

doggydog2 said:
which Global please? this is the link http://en.miui.com/download-361.html claiming to be Full Rom, but the zip is similar to EU version, just a patch.. just tried it, then flashed EU and magisk and getting "can't connect to camera". i was thinking i need to flash some bigger package (.tgz file), but there's none published and going throught the million childish looking forums on eu.miui.com, not sure.. would like TWRP way. perhaps format system?
Click to expand...
Click to collapse
You can find fastboot image here:
https://en.miui.com/a-234.html

AndroPlus said:
You can find fastboot image here:
https://en.miui.com/a-234.html
Click to expand...
Click to collapse
thanks but both links redirect me to http://www.miui.com/ in chinese where i can browse to quasi-full roms again. strange.
btw i'm a fan of your kernel except it causes "can't connect to camera".. after many combinations of flashing i tried skipping the kernel (v01, or v02 or any kernel), and camera is back. however without Night mode this time...
update: found stable ROM at least https://c.mi.com/thread-1907373-1-0.html
update: somehow i trust this is the legit link to develop ROM http://bigota.d.miui.com/9.3.1/ceph....1_20190301.0000.00_9.0_global_cdb3885bac.tgz

AndroPlus said:
You can find fastboot image here:
https://en.miui.com/a-234.html
Click to expand...
Click to collapse
Hey,
Could you make your magisk patch to not require pressing FP scanner twice for FP to register?
Without the patch, works fine from first try, but with it, two presses at least are needed Everytime.
Thank you!

[ROM][S9+/S9][LineageOS 17.1][UNOFFICIAL][05-06-20][OTA]

What's working:
Wi-Fi
Bluetooth
Mobile Network (Calling, Data, etc.)
Signal Strength
GPS
NFC
Audio (Stereo Speakers)
Camera
Fingerprint Sensor
HDMI
MTP
Call Recording
HWC
Encryption
SELinux Enforcing
OTA Updates
Bugs:
?
Notes:
If you are not on Q BL it will not boot.
I would suggest 3.2.3 TWRP or the included lineage recovery
For encryption to work make sure you are on 3.2.3 twrp and haven't formatted /data with any newer versions, issue described here.
Use a stock unmodified vendor and update whenever available, we are using our own fstab now for optional encryption and adoptable storage support so we don't need to touch the vendor.
If you go back to an official build after this with stock vendor, you will be force encrypted on first boot.
These builds are based on the official lineage device trees and kernel, but with more flexibility and my preferred configuration.
Lineage Recovery will be uploaded with each build and if you will only be running this rom i suggest to switch to it.
Instructions:
Make sure TWRP has been installed and is functional
Download the latest build and latest stock vendor.img that is available (optionally gapps and magisk if needed)
Reboot to recovery
Wipe data and cache (required if you switch from other ROMs)
Flash the vendor image
Flash the latest build (then gapps and magisk if needed)
Reboot
How to update builds?
OTA or manually like below
Do not wipe anything unless stated in the changelog
Flash only the rom.zip and it will automatically reinstall your gapps, magisk etc
use /system/addon.d if you would like to keep system mods after an update
Downloads:
Lineage-17.1: (mega) https://mega.nz/#F!0McClQKJ!ic8c0LEYF3zGSo_Ivv1nSw
Lineage-17.1: (github) https://github.com/synt4x93/OTA/releases
Google Apps: https://opengapps.org/
Telegram Channel:
@godlike9810
Paypal:
synt4x.93
XDA:DevDB Information
LineageOS 17.1, ROM for the Samsung Galaxy S9/+
Contributors
Synt4x.93, Erfanoabdi
Source Code: https://github.com/synt4x93/
ROM OS Version: Android 10
ROM Kernel: Linux 4.9.226
ROM Firmware Required: Q BL / Q Vendor
Version Information
Status: Stable
Created: 01-04-2020
Last Updated: 05-06-2020

temp

Great ROM really smooth but only one issue i have is when i try to record the screen with internal sound (gaming) it will mute the sound from the speaker and it's working fine Evox (sorry for my bad English

Hello everyone! Not sure how many people here already been trying this ROM from the Telegram group, but was wondering if anyone has the following issue. Google Chrome seems to become really laggy in the evening hours on my phone, but is fine during the day. Basically scrolling and animations within Chrome are really slow causing bad performance. Wanted to confirm if it's just me as Rob said the issue doesn't seem to happen with the Note 9 and see if anyone here has any suggestions? I am running DTB4 BL and vendor with TWRP 3.2.3.0.

so everything good other than Android Auto? Well done!

Great news! Thanks a lot for keeping our device alive and updated!
Can't wait to try this one out. I assume it's working fine as a daily driver?

geronimoge said:
Great news! Thanks a lot for keeping our device alive and updated!
Can't wait to try this one out. I assume it's working fine as a daily driver?
Click to expand...
Click to collapse
Yup, been using it for several weeks. No odd reboots and stuff, just very stable.

How can I check for the right BL?
What does it mean "Q BL"?
Thanks
EDIT:
Never mind, I found it! :good:

..ok, stupid question, but where can I get q bl?
Do I need to use odin to flash just bl from one of q roms or is there just q bl to download somewhere?

Great rom, thanks for this, I came from the LOS 16 and LOS 17.1 of the 09/01 and all good until now
Here is a link for download q bootloader
https://mega.nz/#F!oFJ1nK5Z!eWD2AU4CQxWSdA_kxxRkHA
vendor images and bootloader zip are taken from devbase rom by alexndr so big thank for his work
current vendor version
S9/S9+ : DTB5
N9 : DTB6

Hoooly ****, I tried to make dirty flash from LOS 16(with replacing bl and vendor, of course), with just cache and dalvik cache wipe, and everything just WORKS fine.
This is AMAZING!
So:
1. twrp - wipe dalvik and cache,
2. twrp - flash bl,
3. twrp - flash vendor, but vendor from OP(!),
4. twrp - flash ROM,
5. twrp - flash opengapps.
Damn, it saved me reinstalling 132 apps, and setting all accounts all over.
What's great - all settings are kept from previous OS.
Of course, I lost viperfx and all magisk-related plugs(list of plugins is still there, so all I needed to do was reinstalling plugins ), but, still, this is great.

Great, glad all went good for you

Thanks for working instructions and links!
Thanks a lot! :victory:
I guess it's to much to ask for those information from a developer...
Side note: there is a boot loader for DTB5 only, but the modified vendor for LOS is DTB4. It works, though.
I did update from the 09/01/2020, so far found two issues:
1. After installing White Wolfs Kernel, UI seems to crash after unlocking via pattern, returning me back to unlock pattern. Had to wipe and re-install (dirty install of LOS didn't solve the issue ).
2. AFWall doesn't work. Applying rules fails leaving the system without internet access.
First one is not that important, but I'd like a firewall on my device...
Anyway: Thanks for the work on the LOS.
HackAR
DeCo59 said:
Here is a link for download q bootloader
https://mega.nz/#F!oFJ1nK5Z!eWD2AU4CQxWSdA_kxxRkHA
vendor images and bootloader zip are taken from devbase rom by alexndr so big thank for his work
current vendor version
S9/S9+ : DTB5
N9 : DTB6
Click to expand...
Click to collapse
xo.en said:
1. twrp - wipe dalvik and cache,
2. twrp - flash bl,
3. twrp - flash vendor, but vendor from OP(!),
4. twrp - flash ROM,
5. twrp - flash opengapps.
Click to expand...
Click to collapse

Great work! ROM works great, even Google pay is working good!

I just installed your ROM. It is very nice that the keyboard is now bigger then the one of theolder version and my new bluetooth headset is finally working.
Unfortunately, I cannot get ctsProfile to pass.
Does anyone have ctsProfile passing?
Edit: nevermind, should have read the docs of MagiskHide Props, the last module did the config automatically...
All the best,
Daniel

Hack_AR said:
After installing White Wolfs Kernel, UI seems to crash after unlocking via pattern, returning me back to unlock pattern. Had to wipe and re-install (dirty install of LOS didn't solve the issue ).
Click to expand...
Click to collapse
Same here, can’t unlock after installing White Wolf kernel. Furthermore, the phone is in Emergency calls only mode, as if there is no SIM card.
How to “undo” or otherwise solve this?

Hack_AR said:
2. AFWall doesn't work. Applying rules fails leaving the system without internet access.
First one is not that important, but I'd like a firewall on my device...
Anyway: Thanks for the work on the LOS.
Click to expand...
Click to collapse
I have the same problem. I'm still on LOS 16 as a daily driver because of this (and because of its awesome battery live). I will keep testing though...
Also my thanks for the great work on LOS!

oldipp said:
Same here, can’t unlock after installing White Wolf kernel. Furthermore, the phone is in Emergency calls only mode, as if there is no SIM card.
How to “undo” or otherwise solve this?
Click to expand...
Click to collapse
I had the problem that the first boot after upgrade went without problems (or PIN prompt in my case) but after that, when entering the correct PIN, the screen got black and then locked again. If I entered the wrong PIN, the phone told me so.
My solution was to use TWRP to rename the file /data/system/locksettings.db to locksettings.db.bak and then reboot. By renaming the file, the screen lock was removed and I could reenable it in the settings.
Good luck,
Daniel

Speedmatze said:
I'm still on LOS 16 as a daily driver because of this
Click to expand...
Click to collapse
I didn't have the problem with the old 09/01/2020 version, so you ca try it, or wait for the fix
---------- Post added at 12:35 PM ---------- Previous post was at 12:21 PM ----------
Weirdly enough, my system doesn't have this file. BUT, another try of White Wolfs kernel just worked. It seems this is an obsolete file, that some times is left behind confused and causes problems in the kernel.
Hofedan said:
I had the problem that the first boot after upgrade went without problems (or PIN prompt in my case) but after that, when entering the correct PIN, the screen got black and then locked again. If I entered the wrong PIN, the phone told me so.
My solution was to use TWRP to rename the file /data/system/locksettings.db to locksettings.db.bak and then reboot. By renaming the file, the screen lock was removed and I could reenable it in the settings.
Good luck,
Daniel
Click to expand...
Click to collapse

Hofedan said:
My solution was to use TWRP to rename the file /data/system/locksettings.db to locksettings.db.bak and then reboot. By renaming the file, the screen lock was removed and I could reenable it in the settings.
Click to expand...
Click to collapse
It was too late for me to remove that file, because I had encrypted /data, was no longer able to access it from within LOS, and I don’t know if TWRP can decrypt /data. If it happens to you, I would suggest to seize the opportunity while LOS still unlocks on the first boot to delete that locksettings file. In any case, having a backup is a must, because I am not sure this will actually work.

[OXYGENOS] Android 10 Open Beta 1 for OnePlus 5

Changelog
System
• Brand new UI design brings light and fluid experience
• Updated to Android 10
Instructions
• Download the appropriate package - OnePlus 5
• Open the File Manager and move the downloaded .zip package from the Downloads folder to the root directory.
• Open Settings - System - System updates, press the cogwheel on the top right corner, choose the Local upgrade option, and select the rollback file.
Users who are still on OBT builds for 5/5T can update to this build only via update from recovery. For those, PLEASE NOTE, your entire data will be wiped.
• Turn off the device -> Press power and volume up key simultaneously until the device enters the Fastboot Mode
• Navigate to Recovery option using volume and power button -> Choose English -> Install from Internal storage -> Select the downloaded zip file -> Select 'Yes'
• Wait until the installation is complete -> Reboot
Note:
• Please keep in mind that this is beta software. These builds are not as stable as our official OTAs. By installing this update, you accept the potential risks.

https://forums.oneplus.com/threads/android-10-open-beta-1-for-oneplus-5-5t.1218721/
OnePlus 5 : https://oxygenos.oneplus.net/OnePlus5Oxygen_23_OTA_063_all_2004201835_a1de28fd0bda4c8b.zip
OnePlus 5T : https://oxygenos.oneplus.net/OnePlus5TOxygen_43_OTA_063_all_2004201837_eca63aa919a1477a.zip

Anyone dirty flashed the full zip through twrp and after that installed magisk for root? Does that work?
Im on latest stable.

PhoenixNLx said:
Anyone dirty flashed the full zip through twrp and after that installed magisk for root? Does that work?
Im on latest stable.
Click to expand...
Click to collapse
I don't think so... It's better to perform a clean install

Astur_Torque said:
I don't think so... It's better to perform a clean install
Click to expand...
Click to collapse
Offcourse its better. But just want to know if it works... If i dont have to install all of my apps again. I'll take a chance. So if anybody tried it allready.
Or clean install full zip and magisk after that maybe?

PhoenixNLx said:
Offcourse its better. But just want to know if it works... If i dont have to install all of my apps again. I'll take a chance. So if anybody tried it allready.
Or clean install full zip and magisk after that maybe?
Click to expand...
Click to collapse
I came here looking for this too. I guess I'll have to do a full backup just in case before updating.

Hi, I come from OOS Stable 9.0.11 root, I just uninstalled MAGISK via TWRP then I restarted and I went through settings then system and I did update locally and everything is fine past. I reflashed TWRP via Fastboot then root with Magisk the last via TWRP and it's all good !!!

Ssmiles said:
Hi, I come from OOS Stable 9.0.11 root, I just uninstalled MAGISK via TWRP then I restarted and I went through settings then system and I did update locally and everything is fine past. I reflashed TWRP via Fastboot then root with Magisk the last via TWRP and it's all good !!!
Click to expand...
Click to collapse
Did you dirty flash or?

yes dirty flash
kernel BluSpark OOS v193 error in TWRP
Recovery TWRP 3.3.1-x blu_spark v9.110
ctsProfil Magisk 20.4 false

Astur_Torque said:
I don't think so... It's better to perform a clean install
Click to expand...
Click to collapse
Yes it worked, for me except duo calls not working when google hotword is enabled, everything is working

duo it's desactived

I tried this method https://droidholic.com/fix-cts-profile-mismatch-errors/ but CHROME doesn't work afterwards so I uninstalled everything

I just dirty flashed it in bluspark.
Full zip install
Magisk 20.4
Clear cache
Done

@PierreVicquery02 Request you to please remove the "[OFFICIAL]" from the thread title. The official thread already exists (it is stickied). Thanks for understanding!

shadowstep said:
@PierreVicquery02 Request you to please remove the "[OFFICIAL]" from the thread title. The official thread already exists (it is stickied). Thanks for understanding!
Click to expand...
Click to collapse
My thread was published before the other one, but as you wish

PierreVicquery02 said:
My thread was published before the other one, but as you wish
Click to expand...
Click to collapse
The other one (official thread) was created on 25th November 2017 by Funk Wizard, when the first Open Beta was released. Ever since then, it has been used for announcing all subsequent Open Beta releases as well as gather feedback on them. Nonetheless, thanks for changing the thread title, I appreciate it!

Does any one have any idea how I can enable full screen gestures for OnePlus 5?
I flashed the open beta build and tries enabling on screen navigation buttons but it's giving me the old buttons
I tried using
adb shell settings put secure swipe_up_to_switch_apps_enabled 1
as it used to work on OOS 9, but this has no effect on the current open beta build
Thanks in advance

The wifi is randomly dropping for me then reconnecting. That happens quite often,anyone else experiencing it? I'm full stock with locked bootloader,haven't done a factory reset though.

this beta ROM can pass safety net with magisk?

fedex_742 said:
this beta ROM can pass safety net with magisk?
Click to expand...
Click to collapse
Somebody passes, somebody not. I don't know why.