Database Develop

[Q] ATT GS5 + Tmobile Rom + Tmobile SIM + Wifi calling !!! Anyone?!

Hello,
Is there any one using the ATT GS5 on Tmobile network (obviously Tmobile SIM) with wifi calling working ? (Please..please.. I know ATT does not have wifi calling, But if you use a Tmobile Rom with Tmobile sim, you expect to have it working) !!
If yes, would you please share which ROM you are using ? Also if there is a trick to make it wok please share it?
Thanks

no luck so far
This is not a solution, I just wanted to report what I have tried so far.
I have a G900A with a t-mobile SIM card. I called TMO to make sure wifi calling was enabled on my line. I used towelroot + safestrap to install the t-mobile Alliance rom (B4), as well as the latest stock TMO rom. So far, wifi calling does not work. It is always stuck on "Enabling" in the calling options menu. VoLTE doesn't work either, but I wasn't expecting it to. My guess is that there is something in the TMO baseband that makes these things work and that ATT phones don't have.
Any hints and ideas would me much appreciated!

No solution yet...
Guillaume2x said:
This is not a solution, I just wanted to report what I have tried so far.
Any hints and ideas would me much appreciated!
Click to expand...
Click to collapse
JJ here,
I tried this ROM - [ROM] G900TUVU1BNH5 ported from TMobile, rooted, deodexed, no knox, Download Booster
... everything works, nice and smooth, but the Wifi Calling is stuck "Enabling"...
Same boat.

My att s5 is unlocked and on the tmobile network. Your telling me i can flash the tmobile stock rom? And everything will be working properly, except wifi calling?

chronichemp said:
My att s5 is unlocked and on the tmobile network. Your telling me i can flash the tmobile stock rom? And everything will be working properly, except wifi calling?
Click to expand...
Click to collapse
Yes. In particular, Mobile Hotspot will work.

Guillaume2x said:
Yes. In particular, Mobile Hotspot will work.
Click to expand...
Click to collapse
Will everything else work properly? I mainly need the t mobile stock rom to enable mobile hotspot, I have an ATT phone and do not wish to trip efuse. Thanks

does anyone know if the same issue will happen with the international version?

On a similar topic, my dad has a AT&T Samsung Galaxy S5 which was sold in Malaysia. And I found out that his phone was not able to hotspot. I have downloaded the official firmware of Samsung Galaxy S5 for Malaysia and was going to use Odin to flash the firmware into his phone. Does that work and not brick the phone? The phone seems to be unlocked as it can be used here except the firmware and the phone is AT&T barnded. Any advise? Thanks
Sent from my iPad using Tapatalk

It all works!
Guys, I have some great news. Both wifi calling AND VoLTE now work on my SM-G900A on the T-mobile network. Here is what I did:
I installed the latest ATT firmware (OA1), released earlier this February. OTA update did not work, so I had to flash the original firmware (ANCE) via Odin, and then flash the two subsequent updates using update.zip on the SD Card. This will remove safestrap and root, but fear not.
Once my phone had AO1 installed, I used this tutorial to root the phone again. It invonves temporarily flashing an earlier (ND3) kernel, using TowelRoot, and then reflashing the OA1 kernel
With my OA1 rooted, I installed safestrap. Make sure you install busybox first.
With safestrap, I installed the T-mobile Alliance Rom (build B4).
Seconds after booting, both Wifi Calling and Voice over LTE work!
Enjoy!
Guillaume

Hi Guillaume,
Have you tried just installing the stock T-mobile 5.0 firmware on a Att GS5 ?
I have my GS5 in ND3 rooted and I'm on Tmobile, but the procedure you have seems really long...
I really need wifi calling as I'm travelling a lot and it allows to call my wife when I'm back in France.
Thanks

Guillaume2x said:
Guys, I have some great news. Both wifi calling AND VoLTE now work on my SM-G900A on the T-mobile network. Here is what I did:
I installed the latest ATT firmware (OA1), released earlier this February. OTA update did not work, so I had to flash the original firmware (ANCE) via Odin, and then flash the two subsequent updates using update.zip on the SD Card. This will remove safestrap and root, but fear not.
Once my phone had AO1 installed, I used this tutorial to root the phone again. It invonves temporarily flashing an earlier (ND3) kernel, using TowelRoot, and then reflashing the OA1 kernel
With my OA1 rooted, I installed safestrap. Make sure you install busybox first.
With safestrap, I installed the T-mobile Alliance Rom (build B4).
Seconds after booting, both Wifi Calling and Voice over LTE work!
Enjoy!
Guillaume
Click to expand...
Click to collapse
Thanks as this is great news for us G900A users on TMO! Question though: After 0A1 installed/backedup and Alliance installed, did you use safestrap [TWRP] to restore your data from 0A1 install?

Geek007W said:
Thanks as this is great news for us G900A users on TMO! Question though: After 0A1 installed/backedup and Alliance installed, did you use safestrap [TWRP] to restore your data from 0A1 install?
Click to expand...
Click to collapse
Actually no; I had been using the t-mo alliance rom using safestrap for a long time (just with the old ATT modem and kernel), so I just restored the data associated with that.
Some more info after a day of tests:
You can also install the 5th build of Alliance Rom, it works too
The camera sometimes glitches a bit; toggling HDR on/off fixes it
Except for the camera glitch I'm pretty happy with it!
Jojososo said:
Hi Guillaume,
Have you tried just installing the stock T-mobile 5.0 firmware on a Att GS5 ?
I have my GS5 in ND3 rooted and I'm on Tmobile, but the procedure you have seems really long...
I really need wifi calling as I'm travelling a lot and it allows to call my wife when I'm back in France.
Thanks
Click to expand...
Click to collapse
I might to try to create a flashable zip from the latest t-mobile lollipop release, keeping only the /system files, and see how that goes. This is really a shot in the dark, hoping that the 4.4.4 modem and kernel from ATT somehow work well enough with the t-mobile lollipop rom. Damn you locked bootloader!

Guillaume2x said:
Actually no; I had been using the t-mo alliance rom using safestrap for a long time (just with the old ATT modem and kernel), so I just restored the data associated with that.
Some more info after a day of tests:
You can also install the 5th build of Alliance Rom, it works too
The camera sometimes glitches a bit; toggling HDR on/off fixes it
Except for the camera glitch I'm pretty happy with it!
I might to try to create a flashable zip from the latest t-mobile lollipop release, keeping only the /system files, and see how that goes. This is really a shot in the dark, hoping that the 4.4.4 modem and kernel from ATT somehow work well enough with the t-mobile lollipop rom. Damn you locked bootloader!
Click to expand...
Click to collapse
Agree with the last expletive.
I did install in alliance B4 in slot 1 of Safestrap and both wi-fi tether and calling worked well. However, my G900A would not reboot or shutdown (dark screen) without a battery pull. After power up...worked?!?!
Did you install as "Stock" or in a slot?
Also have a G870A (Active). Do you know of anyone attempting the 0A1 method and Alliance Rom with the s5 Active?

I might to try to create a flashable zip from the latest t-mobile lollipop release, keeping only the /system files, and see how that goes. This is really a shot in the dark, hoping that the 4.4.4 modem and kernel from ATT somehow work well enough with the t-mobile lollipop rom. Damn you locked bootloader!
Click to expand...
Click to collapse
What would happen if I odin a Stock T-mobile firmware and let T-mobile update it ?
Will it update the Baseband etc ?

Geek007W said:
Did you install as "Stock" or in a slot?
Click to expand...
Click to collapse
I only use the stock slot.
B4 seems a bit more than stable than B5 for some reason. I get some signal issues with B5, and the fingerprint scanner sometimes fails. (It works when I first install B4, use it for a while, and then upgrade to B5. But if I do a /data wipe on B5, these issues appear. I have no idea why).
---------- Post added at 06:15 PM ---------- Previous post was at 06:11 PM ----------
Jojososo said:
What would happen if I odin a Stock T-mobile firmware and let T-mobile update it ?
Will it update the Baseband etc ?
Click to expand...
Click to collapse
You can't do that, the bootloader is locked.

Guillaume2x said:
You can't do that, the bootloader is locked.
Click to expand...
Click to collapse
Okay thanks,
So I started the steps, I've Odin the original firmware and factory reset on but my baseband stayed ND3...
Tried the OTA update hoping that it would work, but as expected it did not.
So I guess I'm at step 1 of your step one.
Then you said you pushed the update via sd card, where did you find the updates ?
Then I'll do the other steps!
Baby steps by baby steps, F... it's been a long time since I rooted my ipod 1st gen to crack my ps3!

Jojososo said:
Okay thanks,
Then you said you pushed the update via sd card, where did you find the updates ?
!
Click to expand...
Click to collapse
They are in the post that I linked to, under the troubleshooting section. If you want to keep your user data, use adb sideload instead of recovery

Guillaume2x said:
I only use the stock slot.
B4 seems a bit more than stable than B5 for some reason. I get some signal issues with B5, and the fingerprint scanner sometimes fails. (It works when I first install B4, use it for a while, and then upgrade to B5. But if I do a /data wipe on B5, these issues appear. I have no idea why).
Click to expand...
Click to collapse
OK. Installed in stock slot but ROM behaved much differently.
1. Wifi sms/mms work both send/receive but erratically.
2. Outgoing calls connect then immediately drop with local "cancelled" within a few milli-secs with a partial ring at the far end.
3. Can't receive calls at all. TMO network thinks I'm offline even though can receive a text.
3. Phone App GUI stutters when making a call.
4. Camera is basically not usable.
Where there any special steps you took to get this working installed in the stock slot? Has your install remained stable? Thanks in advance.

Geek007W said:
OK. Installed in stock slot but ROM behaved much differently.
1. Wifi sms/mms work both send/receive but erratically.
2. Outgoing calls connect then immediately drop with local "cancelled" within a few milli-secs with a partial ring at the far end.
3. Can't receive calls at all. TMO network thinks I'm offline even though can receive a text.
3. Phone App GUI stutters when making a call.
4. Camera is basically not usable.
Where there any special steps you took to get this working installed in the stock slot? Has your install remained stable? Thanks in advance.
Click to expand...
Click to collapse
My phone is still working flawlessly. What your are describing is what happened to me during the short period I reverted to the NG3 kernel in order to use Towelroot. Did you make sure to reflash the OA1 kernel once you were rooted? (before installing safestrap and, within safestrap, installing the Alliance Rom). I have found Alliance B4 to be more stable, so you could try that. Finally, a factory reset (wipe option in safestrap). Beyond that, you could try the whole thing again: flash the "downgrade to NCE" rom, which will remove safestrap and clean everything up; and take the tutorial from there.

Guillaume2x said:
My phone is still working flawlessly. What your are describing is what happened to me during the short period I reverted to the NG3 kernel in order to use Towelroot. Did you make sure to reflash the OA1 kernel once you were rooted? (before installing safestrap and, within safestrap, installing the Alliance Rom). I have found Alliance B4 to be more stable, so you could try that. Finally, a factory reset (wipe option in safestrap). Beyond that, you could try the whole thing again: flash the "downgrade to NCE" rom, which will remove safestrap and clean everything up; and take the tutorial from there.
Click to expand...
Click to collapse
Thanks again Guillaume,
Was running OA1 prior to Alliance B3, so just wiped Dalvik and Cache again, rebooted and left phone for the night. By next morning all was well except for the camera HDR issue. Once toggled it is OK until closed and reopened. Haven't had the time to look into whether there are Alliance B4 options which may affect this.
Have run it a few days and have had zero issues with Wi-Fi calling or tethering or apps: a very smooth experience.
Thanks again for your contribution. Also muniz_ri will find a bottle of wine on the doorstep soon. :highfive:

Where to get update received via OTA?

I'm currently updated using "LMY47Z" release, which I believe is the latest one, however I received another update via OTA a couple days ago, it says:
"This software update will upgrade your Nexus 6 to improve stability, increase security, and fix bugs. Downloading updates over a mobile network or while roaming may cause additional charges.
Size: 24.6MB"
Thing is, I cannot update it because I'm rooted, so I'm trying to find the file to do it manually, but at least in the google site the latest version that I identify is the one that I'm using; do you have any clue about what this update refers to? Is it "LMY48I" maybe? Thanks!

all nexus factory images are here https://developers.google.com/android/nexus/images?csw=1#yakju
you cant update with an ota, even manually, unless you are completely stock without any changed files. you need a factory image to flash via fastboot.

simms22 said:
all nexus factory images are here https://developers.google.com/android/nexus/images?csw=1#yakju
you cant update with an ota, even manually, unless you are completely stock without any changed files. you need a factory image to flash via fastboot.
Click to expand...
Click to collapse
Thanks a lot! I know that, I've been doing all the updates via flashboot, but I don't know which version is the latest one for Nexus 6? is it LMY48I?

saman0suke1 said:
Thanks a lot! I know that, I've been doing all the updates via flashboot, but I don't know which version is the latest one for Nexus 6? is it LMY48I?
Click to expand...
Click to collapse
ahh.. if your not with tmobile or fi, then 48I is right

simms22 said:
ahh.. if your not with tmobile or fi, then 48I is right
Click to expand...
Click to collapse
I bought it tied to Sprint, but it's fully unlocked now, I guess it works right? now that you mention, I see some files for "project FI", what is that? thanks!

saman0suke1 said:
I bought it tied to Sprint, but it's fully unlocked now, I guess it works right? now that you mention, I see some files for "project FI", what is that? thanks!
Click to expand...
Click to collapse
its googles new mobile phone network, where only a nexus 6 works on it(at the moment). they are using tmobile and sprints networks, with wifi calling. since only the n6 can go from one network, to the other, without droppung the call

simms22 said:
its googles new mobile phone network, where only a nexus 6 works on it(at the moment). they are using tmobile and sprints networks, with wifi calling. since only the n6 can go from one network, to the other, without droppung the call
Click to expand...
Click to collapse
Got it, I heard about it! so, LMY48I is good for my unlocked Sprint phone right?

saman0suke1 said:
Got it, I heard about it! so, LMY48I is good for my unlocked Sprint phone right?
Click to expand...
Click to collapse
Yes.

[RESTORE][TOT] Sprint LG G4 (LS991) ZVB TOT

Well, based on multiple requests I've picked up and am now hosting the ZVB .tot file on Rwilco12.com
Short link to it: http://rwilco12.com/downloads.php?dir=Files/Devices/LG G4 (LS991)/Stock ROMs/ZVB
Note: Anti-Rollback version is incremented in ZVB. You will be unable to revert to earlier builds after update.
Enjoy!

garwynn said:
well, based on multiple requests i've picked up and am now hosting the zvb .tot file on rwilco12.com
short link to it: http://rwilco12.com/downloads.php?dir=files/devices/lg g4 (ls991)/stock roms/zvb
enjoy!
Click to expand...
Click to collapse
life saver! THANK YOU!
Here's a mirror: https://qui.click/LS991ZVBTOT

Should there be a note on this OP -that once you use this TOT you can never go back to previous versions (ZV6 / ZV9 / ZVA). You will be stuck at MM ZVB and up.

Agimax said:
Should there be a note on this OP -that once you use this TOT you can never go back to previous versions (ZV6 / ZV9 / ZVB). You will be stuck at MM ZVB and up.
Click to expand...
Click to collapse
Didn't know that - I'll add it in though for now.
Even using Flash Tool or LGUP won't get you back?

garwynn said:
Didn't know that - I'll add it in though for now.
Even using Flash Tool or LGUP won't get you back?
Click to expand...
Click to collapse
Nope. It throws an error saying that the anti-rollback version is higher than the version you are trying to flash.

does data work if already rooted
garwynn said:
Well, based on multiple requests I've picked up and am now hosting the ZVB .tot file on Rwilco12.com
Short link to it: http://rwilco12.com/downloads.php?dir=Files/Devices/LG G4 (LS991)/Stock ROMs/ZVB
Note: Anti-Rollback version is incremented in ZVB. You will be unable to revert to earlier builds after update.
Enjoy!
Click to expand...
Click to collapse
hello, does data work if i have already rooted? also i am on zv6 , then can i directly update to zvb by LgUp and get my data and other sim work

Please save me , should not I install this rom on V6 , V9 anymore . Since there is no Global ( GSM ) Version should not I receive the SIM . Please make me Version Global ( GSM ) Version and SMS / MMS default . I was in Vietnam , are very desperate . Looking forward to your help. Thank you.:crying:

Tuanvo Lao said:
Please save me , should not I install this rom on V6 , V9 anymore . Since there is no Global ( GSM ) Version should not I receive the SIM . Please make me Version Global ( GSM ) Version and SMS / MMS default . I was in Vietnam , are very desperate . Looking forward to your help. Thank you.:crying:
Click to expand...
Click to collapse
i am from Cuba, go to settings-backup and restoration, at the end of the optiom you will see an option that says restore network settings, your sim must be into de phoene to give that option and should solve your problem I run my me

how to update if already rooted
I am on zv6. is it ok i I root, unlock and then install zvb. so that i can use the unlocked phone with data,sms and mms.... is it possible??

anandandrade said:
I am on zv6. is it ok i I root, unlock and then install zvb. so that i can use the unlocked phone with data,sms and mms.... is it possible??
Click to expand...
Click to collapse
Yeah you can do that if you use the tot to upgrade

---------- Post added at 09:22 PM ---------- Previous post was at 09:17 PM ----------
[/COLOR]
pcervera said:
i am from Cuba, go to settings-backup and restoration, at the end of the optiom you will see an option that says restore network settings, your sim must be into de phoene to give that option and should solve your problem I run my me
Click to expand...
Click to collapse
Hey I am having the same problem no gsm option in the mobile network menu..... I tried ur fix but it only restored my gsm signals but my mobile data is still not working and the gsm option is still missing but the signals are ok

No fix yet cant get mobile data to work in pakistan
Same here cant get to use mobile data in pakistan due to no global domestic option .. And wecant even roll back after zvb update thats sad xada team is now our last hope.. Mobile is useles without data connection here

Waebi_n said:
---------- Post added at 09:22 PM ---------- Previous post was at 09:17 PM ----------
[/COLOR]
Hey I am having the same problem no gsm option in the mobile network menu..... I tried ur fix but it only restored my gsm signals but my mobile data is still not working and the gsm option is still missing but the signals are ok
Click to expand...
Click to collapse
Danial Ahmad said:
Same here cant get to use mobile data in pakistan due to no global domestic option .. And wecant even roll back after zvb update thats sad xada team is now our last hope.. Mobile is useles without data connection here
Click to expand...
Click to collapse
Install my MellowMallow ROM global version. It will fix that. http://forum.xda-developers.com/spr...-mellowmallow-debloated-60fps-camera-t3358340

tabp0le said:
Install my MellowMallow ROM global version. It will fix that. http://forum.xda-developers.com/spr...-mellowmallow-debloated-60fps-camera-t3358340
Click to expand...
Click to collapse
Just curious so forgive me, I just got my G4 the other day and I've been doing a ton of research as expected when it comes to ROMs, root, and unlocking. Let me ask you this if I can:
Since I have the LS991, knowing it's technically domestically locked to Sprint in the US, and you say your ROM is a global version, does that mean if I decide to upgrade to your ROM (of course pushing ZVB first then your ROM with the instructions you've provided) will that remove the unlock I currently have in place with the International ROM, or will I be completely stuck and dead in the water again locked up tight with no way to roll back to anything pre-ZVB and no root potential either? I can live without root, honestly the only thing I require it for is Xposed and a single module so I can control music playback with the volume buttons (can't find any other way to do it) but I can't even get Xposed installed properly on ZV6 right now either even with FlashFire.
Long complicated BS I know, sorry, the basic question: if I were to flash the ZVB TOT then flash your MellowMallow ZVB, will it unlock this LS991 I have, or... should I just stick with ZV6 and be done with it?
I believe you have an LS991 yourself but, you're obviously using Sprint so it's a non-issue whereas I want to use T-Mobile so, my primary concern is being able to be unlocked, that's a must-have thing whereas root is a no-go on Marshmallow right now anyway.

br0adband said:
Just curious so forgive me, I just got my G4 the other day and I've been doing a ton of research as expected when it comes to ROMs, root, and unlocking. Let me ask you this if I can:
Since I have the LS991, knowing it's technically domestically locked to Sprint in the US, and you say your ROM is a global version, does that mean if I decide to upgrade to your ROM (of course pushing ZVB first then your ROM with the instructions you've provided) will that remove the unlock I currently have in place with the International ROM, or will I be completely stuck and dead in the water again locked up tight with no way to roll back to anything pre-ZVB and no root potential either? I can live without root, honestly the only thing I require it for is Xposed and a single module so I can control music playback with the volume buttons (can't find any other way to do it) but I can't even get Xposed installed properly on ZV6 right now either even with FlashFire.
Long complicated BS I know, sorry, the basic question: if I were to flash the ZVB TOT then flash your MellowMallow ZVB, will it unlock this LS991 I have, or... should I just stick with ZV6 and be done with it?
I believe you have an LS991 yourself but, you're obviously using Sprint so it's a non-issue whereas I want to use T-Mobile so, my primary concern is being able to be unlocked, that's a must-have thing whereas root is a no-go on Marshmallow right now anyway.
Click to expand...
Click to collapse
Yes, you should be able to do as you'd like. The global version unlocks the phone for GSM use. You can add and edit any apns you like. There are several people who have been using the Global version successfully. I'm not sure about using it on T-mobile, and I can't make any guarantees, but I would assume you could use it just as any other GSM carrier. I also have a ZVA version you can try. (this is marshmallow and will not prevent rollback) ZVA Version

Yah, but ZVA has no root so, no Xposed, so no button controls, etc.
Anyway, I know about the International ROM and had it working and yes T-Mobile kicks in almost immediately without any issues, but from what I read about that ROM is that the person that made it obviously customized it somewhat and I saw at least one person say the reason it unlocks GSM capability is because of some build.prop edits and I'm trying to figure out what those edits happen to be. I'd love to be able to take a pure stock ZV6 and then root it, modify it so it works like the International ROM and go from there.
The problem I'm having currently is that I can't get Xposed flashed on the International ROM for some strange reason I can't quite figure out - each time I try to flash it there's a mismatch between the architecture/platform and it craps out. That doesn't happen with the rooted ZV6, but it's happening with the International ZV6 which irks me to no end and I can't find out what's causing the issue or else I'd just stick with the International one.
If the only difference between the pure stock ZV6 build and the International version of the same build is a a build.prop edit I'm going to have to figure out what the hell that is.
I just want to end up with ZV6, rooted, Xposed installed and working, and T-Mobile access which I should be able to accomplish - the problem is finding the right combination of this, that, and whatever else to make it all come together. So far, after like 15 wipes and flashes, I still haven't figured out that perfect mix to get what I want just yet.
But thanks for responding.

br0adband said:
Yah, but ZVA has no root so, no Xposed, so no button controls, etc.
Anyway, I know about the International ROM and had it working and yes T-Mobile kicks in almost immediately without any issues, but from what I read about that ROM is that the person that made it obviously customized it somewhat and I saw at least one person say the reason it unlocks GSM capability is because of some build.prop edits and I'm trying to figure out what those edits happen to be. I'd love to be able to take a pure stock ZV6 and then root it, modify it so it works like the International ROM and go from there.
The problem I'm having currently is that I can't get Xposed flashed on the International ROM for some strange reason I can't quite figure out - each time I try to flash it there's a mismatch between the architecture/platform and it craps out. That doesn't happen with the rooted ZV6, but it's happening with the International ZV6 which irks me to no end and I can't find out what's causing the issue or else I'd just stick with the International one.
If the only difference between the pure stock ZV6 build and the International version of the same build is a a build.prop edit I'm going to have to figure out what the hell that is.
I just want to end up with ZV6, rooted, Xposed installed and working, and T-Mobile access which I should be able to accomplish - the problem is finding the right combination of this, that, and whatever else to make it all come together. So far, after like 15 wipes and flashes, I still haven't figured out that perfect mix to get what I want just yet.
But thanks for responding.
Click to expand...
Click to collapse
Ahh, I understand! Yeah, what you need to do is replace all instances of "p1_spr_us" in builld prop with "p1_global_com". (no quotes) Also, replace all instances of SPR with GLOBAL and change target country to COM. Then add the apns. https://github.com/tabp0le/MellowMa...40e511396bc298e37fb5/system/etc/apns-conf.xml
Here is an example for you to go off of.. https://github.com/tabp0le/MellowMallowROM-for-G4-LS991/compare/global

Holy cow, a treasure trove of info, just what I'd been looking for.
So, theoretically if I make those adjustments to the build.prop, that theoretically should make the pure stock ZV6 (from the TOT since there's no KDZ, bleh) be basically the International ROM or at least function like it, I presume?
One thing that I'm kinda frustrated above was when I got this device a few days ago the previous owner had done most if not all of this already and had UltraPOP ZVA on it, and working with T-Mobile. Of course in my haste to redo everything on my own I neglected to make a solid backup of the carrier folder (it still works with the one the unlocking thread provided so I'm not dead in the water in that respect). I looked around for a "pure" LS991 carrier folder but I suppose there just isn't such a thing and yes I know they do contain some device and user specific information (account related with Sprint) so I suppose it's not a huge concern.
Last question if I can: I'm not all that familiar with attempting to edit TOT files (assuming that can be done) so, is it possible or do you believe that altering the necessary build.prop variables on the pure stock ZV6 would cause that to work the same after a reboot? Guess I'll give that a go here in a few and see what happens. Also, when you say add the apns do you mean to build.prop or put the xml file in system/etc where it should be?
Almost there, almost... thanks for the info, definitely.

br0adband said:
Holy cow, a treasure trove of info, just what I'd been looking for.
So, theoretically if I make those adjustments to the build.prop, that theoretically should make the pure stock ZV6 (from the TOT since there's no KDZ, bleh) be basically the International ROM or at least function like it, I presume?
One thing that I'm kinda frustrated above was when I got this device a few days ago the previous owner had done most if not all of this already and had UltraPOP ZVA on it, and working with T-Mobile. Of course in my haste to redo everything on my own I neglected to make a solid backup of the carrier folder (it still works with the one the unlocking thread provided so I'm not dead in the water in that respect). I looked around for a "pure" LS991 carrier folder but I suppose there just isn't such a thing and yes I know they do contain some device and user specific information (account related with Sprint) so I suppose it's not a huge concern.
Last question if I can: I'm not all that familiar with attempting to edit TOT files (assuming that can be done) so, is it possible or do you believe that altering the necessary build.prop variables on the pure stock ZV6 would cause that to work the same after a reboot? Guess I'll give that a go here in a few and see what happens. Also, when you say add the apns do you mean to build.prop or put the xml file in system/etc where it should be?
Almost there, almost... thanks for the info, definitely.
Click to expand...
Click to collapse
Regarding the apns: Replace the apns_conf.xml in system/etc.
Regarding TOT: you can't edit the tot
What you need to do to get exactly what you want: Root ZV6. Then make the changes and reboot. Or harder way, is to edit the rootedsystemzv6.img. Mount it on your pc and edit the files. Then flash it like you would to get root in download mode with send_command.exe. You can add me on skype tabp0le

Didn't realize I could edit the .img files but then again .img being what they should be that makes sense I suppose. That's probably the best solution for me personally, edit the rootedsystemzv6.img so it's done just once and it makes things easier or at least it should if I have to redo things.
Now to find something that will not only open the img but allow me to edit/save it when done.

Sensors not working

Okay so this problem started yesterday. My phone was working properly before yesterday but i don't know what went wrong.
None of the sensors (proximity, ambient light, gyroscope, acceleration, etc) are not working properly at the moment since yesterday approximately at 6 pm (Its 10 47 pm right now) some of the sensors (proximity and ambient light if my memory serves me right) started working and after an hour they were back dead. now i did try to root my phone using sunshine it failed to gain temp root so it didn't proceed further. could it be because some of the temp'root files are still present in the phone? as no sensors are working my the chop chop for flashlight and twist for camera gestures don't work and wave or reach for glance display also doesnt work. sometimes the screen doesn't turn on (when it doesn't turn on after about 5 minutes of trying i force reboot the phone and the screen turns on and works fine but the problem remains) this probably happens when i turn off the phones screen it doesn't always happen but once in a while it does. My phone is not rooted and neither is its bootloader unlocked android security patch level is "January 1, 2017" and the build number is "MCG24.251 -5-5" and my phone is running android marshmallow 6.0.1.
PS. I'm new to XDA so sorry if I'm breaking any rules please correct me if i do break any and I'm sorry for my bad English as it isn't my native language. any help is greatly appreciated.

Use ADB or RSDLite and reflash your stock Verizon Motorola Marshmallow firmware. See if that restores your sensors.
Many downloads available for full stock firmware, but here's a link to one:
[FXZ] Official Stock Firmware 6.0.1 MCG24.251-5-5
https://forum.xda-developers.com/dr...-official-stock-firmware-6-0-1-mcg24-t3569334
Since your bootloader is not unlocked, it's important you only flash your current firmware or newer. This is what you have, and right now there is no newer.

ChazzMatt said:
Use ADB or RSDLite and reflash your stock Verizon Motorola Marshmallow firmware. See if that restores your sensors.
Many downloads available for full stock firmware, but here's a link to one:
[FXZ] Official Stock Firmware 6.0.1 MCG24.251-5-5
https://forum.xda-developers.com/dr...-official-stock-firmware-6-0-1-mcg24-t3569334
Since your bootloader is not unlocked, it's important you only flash your current firmware or newer. This is what you have, and right now there is no newer.
Click to expand...
Click to collapse
Okay thank you the link you provided, The first one is 1.64-ish GBs so I'm supposing I only need that? Or do I need to download files from all links?

raaahimaaa said:
Okay thank you the link you provided, The first one is 1.64-ish GBs so I'm supposing I only need that? Or do I need to download files from all links?
Click to expand...
Click to collapse
First one is the full image. That's all you need.
The other links are for people who just want/need specific parts.

ChazzMatt said:
First one is the full image. That's all you need.
The other links are for people who just want/need specific parts.
Click to expand...
Click to collapse
Can you also please tell me on how am I supposed to flash the zip file?
ADB sideload? fastboot? I have the mini adb package installed in my pc.
Oh and my phone is network unlocked (runs all network sims) so will flashing this make it locked back to verizon? If so is there a way to make a backup?

raaahimaaa said:
Can you also please tell me on how am I supposed to flash the zip file?
ADB sideload? fastboot? I have the mini adb package installed in my pc.
Oh and my phone is network unlocked (runs all network sims) so will flashing this make it locked back to verizon? If so is there a way to make a backup?
Click to expand...
Click to collapse
Your phone was never "locked" to Verizon. All Verizon postpaid LTE phones are carrier unlocked since 2012, due to forced agreement with government FCC agency. Verizon had to agree to stop doing that, in return for more LTE spectrum.
Thus, all Verizon LTE postpaid/contract phones released since that agreement in 2012 (5 years ago) are network unlocked phones. The Droid Turbo was in that category.

ChazzMatt said:
Your phone was never "locked" to Verizon. All Verizon postpaid LTE phones are carrier unlocked since 2012, due forced agreement with government FCC agency.
All Verizon LTE phones are network unlocked phones.
Click to expand...
Click to collapse
Ooohhh okay thanks I'll just use RSDlite then thank you I'll inform you if it worked or not.

worked?

pedro_maciel said:
worked?
Click to expand...
Click to collapse
Actually I never tried that. My phone fell from my hand and voila it got fixed I believe it's a hardware issue because whenever they stop working I give it a hard jerk and that seems to do the job

I have same issue with my droid turbo

Back to Stock Roms

So here we have stock files pulled from the Motorola Firmware Team on AFH Just mirrored for your convenience
I cant include the firmware for Verizon & Att due to the fact there bootloaders are NOT unlocked. Therefore if somebody reads this and corrects me, they cant flash it.
I have the stock files and Flash Alls made by me and @Uzephi
Sprint Flash Alls made @Uzephi
Latest https://androidfilehost.com/?fid=889964283620761146
June https://androidfilehost.com/?fid=962021903579487984
Flash All T-Mobile made by me
August https://drive.google.com/file/d/1MW4JWa8Zij36hsO0u41Zf-9a6OT3FpbA/view?usp=drivesdk
June https://drive.google.com/file/d/0B1tqDJm_qQf4YWxreUJSWXJWeVk/view?usp=drivesdk
To use the flash all for Sprint and T-Mobile you simply unzip the file and put your phone into fastboot mode and hit flashall.bat and that's it. I have already included the fastboot file in the zip.
Requests: If you have a request for firmware please leave a message below.
Credits: @Uzephi
Motorola Firmware Team https://androidfilehost.com/?w=profile&uid=24269982087010314

Tested
Just tested the T-Mobile one and all worked perfect.

Will it work to downgrade from the OTA update yesterday?

crackerjack9249 said:
Will it work to downgrade from the OTA update yesterday?
Click to expand...
Click to collapse
Yes, i was on the Tmobile update 26.5 and it downgraded just fine.

Is it possible to flash a Verizon rom on sprint moto z2 force?

I got permission denied and now phone says corrupt won't boot, and to visit Motorola website unlock bootloader. Do I have to unlock bootloader first? How can I fix this?

lrosado said:
I got permission denied and now phone says corrupt won't boot, and to visit Motorola website unlock bootloader. Do I have to unlock bootloader first? How can I fix this?
Click to expand...
Click to collapse
I would say yes
Sent from my SM-N930F using XDA-Developers Legacy app

I am unable to enable one unlock since the phone bricked once I tried to install this. It wont boot. Any suggestions on how to get my device unbricked or any way to enable one unlock using adb?

Any chance we could get a tmo flash all of the august update?

Hasn't been released yet

Any way to fully lock this backup? Long story short the IMEI reads 0 and this didnt fix the issue, but I need to phone to be 100% stock.

matistight said:
Any way to fully lock this backup? Long story short the IMEI reads 0 and this didnt fix the issue, but I need to phone to be 100% stock.
Click to expand...
Click to collapse
I did a warranty exchange when this happened to me.
---------- Post added at 06:03 AM ---------- Previous post was at 06:01 AM ----------
Question, is there a way to make the bootloader not say you've unlocked and flashed different software?

Also, can I just flash the stock boot?

anyone got stock boot img for t-mobile? if so can you send me a link please

Does anyone know if I can run the fasboot command to lock the bootloader after I've flashed this? I need to take mine back in for an exchange.

charlatan01 said:
Does anyone know if I can run the fasboot command to lock the bootloader after I've flashed this? I need to take mine back in for an exchange.
Click to expand...
Click to collapse
fastboot oem lock

cfriendr said:
fastboot oem lock
Click to expand...
Click to collapse
Yeah, I know the command. I was just wondering if that was all it takes and if it worked. Sorry my question was so vague.

charlatan01 said:
Yeah, I know the command. I was just wondering if that was all it takes and if it worked. Sorry my question was so vague.
Click to expand...
Click to collapse
It half-worked for me. During boot-up, it doesn't give me the "unlocked bootloader" warning, but it *does* give me a "The OS installed is different" message. Looks similar, but the text is yellow instead of orange.

cfriendr said:
It half-worked for me. During boot-up, it doesn't give me the "unlocked bootloader" warning, but it *does* give me a "The OS installed is different" message. Looks similar, but the text is yellow instead of orange.
Click to expand...
Click to collapse
I'm trying to get rid of the "your device has loaded a difference operating system". Did you find the way to get the phone back to 100% stock?

First off, wanna give a HUGE THANKS to joemossjr for releasing this package AND for that .bat installer! Long story short, I was about to either claim warranty or Jump! (T-Mobile insurance/upgrade program) due to me trying to hook a USB Thumbdrive in over USB OTG (Kingston 16GB) and then there were slowdowns and app crashes, everywhere... heck it was to the point where I kept getting spammed with android.process.acore keeps crashing messages! Couldn't use many internet apps, no phone calls, and could barely text just to name a few.
I do got a suggestion though: is it possible to have a modified version of the June ROM package on Sprint & T-Mobile to where instead of having the stock boot.img, you can have the modified version with the Magisk root access? That would be great and somewhat of a convenience (YMMV; I used this patched boot.img on the 26.2 version and both system updates & t-mobile visual voicemail setup kept falling flat on its face everytime)
Thanks again, YOU ARE THE MAN!!!