Database Develop

[TWRP][P9 Lite][3.1.1-0][EMUI 5.x / AOSP N][DECRYPTION SUPPORT]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is only for Huawei P9 Lite (VNS)
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x with decryption support.
Intended for usage on stock emui 5.x in combination with unlocked bootloader and
modded boot image with disabled dm-verity (depending on what you want to do).
Code:
[COLOR="red"][B]WARNING:[/B] since 3.1.0-2 update we've enabled image flashing to special partitions -
not just /recovery or /boot partition.
That means your device could be bricked in a few seconds if you do not pay attention
or don't know what you're doing. (Noobs please stay away out of this section!)[/COLOR]
Installation Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-0-venus.img
3. reboot to recovery!
Rooting Methods
Code:
[B][U]1. Official SuperSU (not just 2.82+)[/U][/B]
1. Ensure you are running emui 5.x stock kernel
2. Tick the option "Keep vendor partition mounted" inside OpenKirin Settings
3. download and install [URL="www.supersu.com/download"]official SuperSU[/URL]
4. Enjoy!
[B][U]2. Custom SuperSU[/U][/B]
1. Make sure the device running stock EMUI 5.x boot.img
2. flash this modded SuperSU 2.79: [URL="https://drive.google.com/open?id=0BxWP2gF_0Bd_UmQ2Zm9ZRGxBTUE"]download here[/URL]
3. enjoy root :)
[COLOR="red"][B]NOTE:[/B][/COLOR] this is for every device (except kirin 960 based) running emui 5.x without loop support.
[B][U]3. Magisk[/U][/B]
1. ensure you are running a emui 5.x stock kernel
2. flash magisk
3. enjoy root & safetynet (read note)
[B][COLOR="red"]NOTE:[/COLOR][/B] Magisk Hide is a known problem on Huawei/Honor devices.
Make sure you are not rebooting/turning off your device with Magisk Hide enabled!
You may face a broken fingerprint scanner, do not worry,
simply disable magisk hide and reboot - fps works again!
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_huawei_venus/releases/download/3.1.1-0/twrp-3.1.1-0-venus.img"][U]download twrp-3.1.1-0-venus.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 10. June 2017
Q: which P9 Lite models are supported?
A: every model should be supported.
Q: Can i use this TWRP with decrypted /data?
yes, you can! (have a look at the instructions in FAQ)
Q: Can i install LOS or AOSP based roms with this TWRP?
yes, you can! (please follow the installing procedure in the corresponding rom thread)
Q: Can i install Magisk?
A: Since 3.1.1-0 you are able to flash Magisk through TWRP (recovery kernel has been updated)
Q: Does official SuperSU work?
A: Yes, even though chainfire included a fix in his upcomming version,
you can use every version of it, just check the "Rooting Instructions" section.
Q: ETAs?
A: No.
Going back from decrypted -> encrypted?
Code:
1. Format /data inside of TWRP
2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
3. Do a factory reset inside of eRecovery
5. Let device boot up
6. Install your current firmware hw_data package & SuperSU using TWRP again
Want to decrypt? No problem.
Code:
1. Format /data inside of TWRP
2. Flash a kernel with forceencrypt disabled
3. bootup your device
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=220328"]paulobrien[/URL]
XDA:DevDB Information
TWRP, Tool/Utility for the Huawei P9 Lite
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin/android_device_huawei_hi6250
Version Information
Status: Stable
Created 2017-04-12
Last Updated 2017-06-11

Reserved
Changelog
Code:
[B]TWRP 3.1.0-2[/B]
* Add support for NTFS formatted MicroSD crads or OTG drives
* Enabled direct image flashing to special partitions
(be careful when using it - one wrong klick means brick in a second!)
* TWRP is now compatible with AOSP based ROMS (LineageOS)
and decrypted Stock ROMS, transition from Stock to LOS is possible (encrypted -> decrypted).
* Correct versioning - Device version is now comming from the common base.
* 6250-common: switch to common base to ensure full support
[strike][B]TWRP 3.1.0-1[/B]
(never released)[/strike]
[B]TWRP 3.1.0-0[/B]
* initial release

??
I have not tested with recovery twrp here, i have tested it with recovery revolution rc3 of (badwolf). THANK YOU...
Your supersu 2.79 works apparently correctly..merci ..

Have anyone tested this TWRP yet?

pospi69 said:
Have anyone tested this TWRP yet?
Click to expand...
Click to collapse
yes i tested it and it is fully working

Starting with TWRP recovery will be possible to switch to this recovery with the install command?
Thank you
nigol

OldDroid said:
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x with decryption support.
Intended for usage on stock emui 5.x in combination with unlocked bootloader and
modded boot image with disabled dm-verity (depending on what you want to do).
Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.0-0-hi6250.img
3. reboot to recovery!
Rooting - Special SuperSU
Code:
1. Make sure the device running stock EMUI 5.x boot.img
2. flash this modded SuperSU 2.79: [URL="https://drive.google.com/open?id=0BxWP2gF_0Bd_UmQ2Zm9ZRGxBTUE"]download here[/URL]
3. enjoy root :)
[COLOR="red"][B]NOTE:[/B][/COLOR] this is for every device running emui 5.x without loop support.
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_huawei_hi6250/releases/download/3.1.0-0/twrp-3.1.0-0-hi6250.img"][U]download twrp-3.1.0-0-hi6250.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 12. April 2017
Q: anything special in your recovery?
A: yes, it is made for huawei phones and excludes important directories during wiping/factory reset
(like data/hw_init for example)
Q: which P9 Lite models are supported?
A: every model should be supported.
Q: ETAs?
A: No.
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=220328"]paulobrien[/URL]
XDA:DevDB Information
TWRP, Tool/Utility for the Huawei P9 Lite
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin/android_device_huawei_hi6250
Version Information
Status: Stable
Created 2017-04-12
Last Updated 2017-04-12
Click to expand...
Click to collapse
Is it possible to install xposed with this twrp?

maka1105 said:
Is it possible to install xposed with this twrp?
Click to expand...
Click to collapse
There is no Xposed for nougat -,-

pospi69 said:
Have anyone tested this TWRP yet?
Click to expand...
Click to collapse
we never release untested stuff to the public.
nigol said:
Starting with TWRP recovery will be possible to switch to this recovery with the install command?
Thank you
nigol
Click to expand...
Click to collapse
simply flash it via fastboot or from inside twrp (install image method - select recovery partition)
maka1105 said:
Is it possible to install xposed with this twrp?
Click to expand...
Click to collapse
as simo already told you, since when do we have xposed for nougat? Uhh, little addition, please, never quote op :|

I'm using Elite Kernel, is this still usable with a non stock kernel?

zgomot said:
I'm using Elite Kernel, is this still usable with a non stock kernel?
Click to expand...
Click to collapse
depends if it forces decryption or not ..
the recovery won't work on devices without encryption for now (wip, almost ready).
EDIT: just checked, it is compatible with this recovery

OldDroid said:
depends if it forces decryption or not ..
the recovery won't work on devices without encryption for now (wip, almost ready).
EDIT: just checked, it is compatible with this recovery
Click to expand...
Click to collapse
Hello,
I flashed with this recovery and it works well. Btw I tried to root the device (by using provided SuperSu, I flashed it and installed supersu app) but it didn't succeed. The supersu app says it need to update su binary and when continue, the app freezes. Previously I used revolution recovery rc2 with elite kernel v4. Any solution?
Thank you.
P.s.: My device is VNS-L31C636 and I'm using Android 7.0 with EMUI 5.0

eagletdw said:
Hello,
I flashed with this recovery and it works well. Btw I tried to root the device (by using provided SuperSu, I flashed it and installed supersu app) but it didn't succeed. The supersu app says it need to update su binary and when continue, the app freezes. Previously I used revolution recovery rc2 with elite kernel v4. Any solution?
Thank you.
P.s.: My device is VNS-L31C636 and I'm using Android 7.0 with EMUI 5.0
Click to expand...
Click to collapse
rooting method provided only works with stock kernel as elite kernel is pre-patched!

titanium app not restoring any app..... tried with both mount namesapce options,,, same issue which i got in porting phh superuser and same happen with me on v1 build,,,

HassanMirza01 said:
titanium app not restoring any app..... tried with both mount namesapce options,,, same issue which i got in porting phh superuser and same happen with me on v1 build,,,
Click to expand...
Click to collapse
nope, i just checked it, works fine with BusyBox installed. Check "Control Center" - justed backed it up and restored it.

How i can flash SuperSU? i download your files but i do not know how to install this. In twrp i cant see this file :/

Ah :laugh:

Will try to adjust it as i also have working busybox installed by stericson....

Mareczin said:
How i can flash SuperSU? i download your files but i do not know how to install this. In twrp i cant see this file :/
Click to expand...
Click to collapse
You have to change the extension, change .0 to . zip

How's backup in this recovery?
Because when i backed up using revolution recovery, then tried to restore it i lose many apps and functionalities
example: the phone doesn't produce any sound
fm radio app not found
and many more
if someone tried it i want to know

TWRP[UNOFFICAL]-BETA-BUILD-[12-03-2019]

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main Highlights
✪ MTP support
✪ Can flash stock os Images
✪ Backup/restore works with any os
✪ Restore your old twrp backup
✪ Optimized and faster
✪ Build On A29 Pre Built Kernel By Realme
✪ Full compatible with color os
ScreenShots
Download Link:
https://mega.nz/#!5gYnjQSB!YhC_ZTHuopwwP50LxTvJ1VOq4zYSfG0LAudWr6gatUA
Code:
Bugs
:GSI Flashing Has Some Issues
:If You Finds Any Other Bug Then Report Me
Credits;
AnuragRai(Developer)
Hamza(Tester)
RK(Tester)
Jatin(Tester)
MKS(RM2p Dev,Always Supported Me)
And Whole Realme Tester Team
XDA:DevDB Information
TWRP[UNOFFICAL]-BETA-BUILD-[12-03-2019], Tool/Utility for the Oppo Realme 1
Contributors
anurag rai, hamza
Version Information
Status: Beta
Current Beta Version: 01
Beta Release Date: 2019-03-12
Created 2019-03-12
Last Updated 2019-03-12

Flashing Guide
Code:
[CENTER]
:adb reboot bootloader
:fastboot flash recovery recoveryname.img
:reboot phone manually ,not from fastboot
:After phone boots up,power off it
:Press Power Button+Volume UP &Down For Approx 20 seconds
:After You Are Inside Of Twrp,do this
:Wipe-Format Data-Yes And reboot manually by power off the device
:And Press Power Button+Volume UP & Down
:Flash Magisk And Reboot [/CENTER]
Caution
Code:
:Never Reboot directly to recovery by adb or fastboot commands as it will cause soft brick,
:always manually reboot

Reserved

Thankyou bro..

Finally we are getting working twrp recovery for rm 1:highfive: keep up the good work mate

anabhi said:
Finally we are getting working twrp recovery for rm 1:highfive: keep up the good work mate
Click to expand...
Click to collapse
Bro can you help me with fixing reboot to recovery issue

anurag rai said:
Flashing Guide
Code:
[CENTER]
:Wipe-Format Data-Yes And reboot manually by power off the device
:And Press Power Button+Volume UP & Down
:Flash Magisk And Reboot [/CENTER]
Caution
Code:
:Never Reboot directly to recovery by adb or fastboot commands as it will cause soft brick,
:always manually reboot
Click to expand...
Click to collapse
After wiping data and turning off. My phone wont boot. I doesnt even show the logo. Please help.

It's Working ! Thanks Alot Mate.:victory:

awesome work bro.. thnks a lot u r too fast..

Why wiping data ? Also if we wipe data then won't it take time to setup the device after that only we could reboot. And I just need to put some some apps into system, I dont want to flash magisk. Can I just boot into recovery once using fastboot boot twrp.img command /

Awesome man!??

svsexodia said:
Why wiping data ? Also if we wipe data then won't it take time to setup the device after that only we could reboot. And I just need to put some some apps into system, I dont want to flash magisk. Can I just boot into recovery once using fastboot boot twrp.img command /
Click to expand...
Click to collapse
Yes you can

manavkush said:
Flashing Guide
Caution
After wiping data and turning off. My phone wont boot. I doesnt even show the logo. Please help.
Click to expand...
Click to collapse
Charge it bro

Realme 1 - Treble Rom
'TREBLE', let's talk about it.
Realme 1 supports treble, we have unlocked bootloader, a working TWRP, and several Treble Roms available, so why haven't anyone tried flashing a Treble Rom yet on Realme 1? Those are the only things we need to flash a Treble Rom on this device right? Am I missing something?
I don't have a backup phone nor do we have official firmware for Realme 1 to recover from soft brick, so I am not willing to risk my device yet. If someone else could do it instead I would appreciate it a lot.
P.S. Someone should start a pinned thread for 'Realme 1 - Treble Roms'

johndoe5 said:
'TREBLE', let's talk about it.
Realme 1 supports treble, we have unlocked bootloader, a working TWRP, and several Treble Roms available, so why haven't anyone tried flashing a Treble Rom yet on Realme 1? Those are the only things we need to flash a Treble Rom on this device right? Am I missing something?
I don't have a backup phone nor do we have official firmware for Realme 1 to recover from soft brick, so I am not willing to risk my device yet. If someone else could do it instead I would appreciate it a lot.
P.S. Someone should start a pinned thread for 'Realme 1 - Treble Roms'
Click to expand...
Click to collapse
I've Flashed Phh's GSI Treble Roms.All Of Em Seems To Work Fine But Volte Is Not Working On Any Of Em So I Had To Switch Back To Stock. I Tested AOSP 9.0,RR 9.0 And Lineage 8.1:silly:

It's_Shawn said:
I've Flashed Phh's GSI Treble Roms.All Of Em Seems To Work Fine But Volte Is Not Working On Any Of Em So I Had To Switch Back To Stock. I Tested AOSP 9.0,RR 9.0 And Lineage 8.1:silly:
Click to expand...
Click to collapse
Which TWRP did you use?
And where can I find the stock firmware?

johndoe5 said:
Which TWRP did you use?
And where can I find the stock firmware?
Click to expand...
Click to collapse
That Time I Didn't Use Any Recovery,I Used Fastboot Commands

Hey I successfully installed TWRP recovery but I didn't flash magisk yet. But even now there is a message in status bar saying "Rooting of your phone has been detected. Tap to fix" and that screen is showing me to install 2.1GB OTA update. Idk what is happening I never faced such thing in any of my earlier phone while twrp flashing . What is this ? Can I install the update ? And why is it showing. Will there be possible bootloops if I install the update or willI I still be having TWRP or stock recovery get flashed. Please answer so i can proceed with my choice.

5s4rnv33r said:
Hey I successfully installed TWRP recovery but I didn't flash magisk yet. But even now there is a message in status bar saying "Rooting of your phone has been detected. Tap to fix" and that screen is showing me to install 2.1GB OTA update. Idk what is happening I never faced such thing in any of my earlier phone while twrp flashing . What is this ? Can I install the update ? And why is it showing. Will there be possible bootloops if I install the update or willI I still be having TWRP or stock recovery get flashed. Please answer so i can proceed with my choice.
Click to expand...
Click to collapse
https://forum.xda-developers.com/re...l-method-root-realme-1-install-t3908030/page3
try the solution written in soham028 's post.
it worked for me and updating os will remove root.

vikas2316 said:
https://forum.xda-developers.com/re...l-method-root-realme-1-install-t3908030/page3
try the solution written in soham028 's post.
it worked for me and updating os will remove root.
Click to expand...
Click to collapse
Updating OS will remove root but will it also remove TWRP ???
One more question I followed all the steps correctly (including wiping data) but from TWRP I can't mount DATA.
---------- Post added at 10:01 PM ---------- Previous post was at 09:13 PM ----------
After wiping data if I just reboot to TWRP recovery then I can mount the DATA but once I have started the phone and set it up then again I boot into TWRP recovery and when I try to mount DATA I am not able to do so. Can't mount /data invalid argument. Please suggest something.

[RECOVERY][lavender][UNOFFICIAL] TWRP touch recovery for Redmi Note 7

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. It's a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
All function in a normal TWRP
Multi-language support
Supports MTP
Support decrypt /data!
Install guide:
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Run "fastboot flash recovery recovery.img" in command line
5. Reboot and enjoy it
Download:
https://drive.google.com/uc?id=1rp_cgVuk6fsRybN0wDoOTbt_Pc-vOiHx&export=download
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/thelazyindian/android_device_xiaomi_lavender-twrp
Note:
Due to a bug in android pie, the recovery may ask for pattern if you have set PIN/password for encryption (and vice-versa). Unfortunately, to fix this you need to format your data partition and ask the developer of ROM to include this commit.
When you flash twrp for the first time in MIUI you need to goto Wipe > Format Data otherwise you won't be able to boot to system as it will ask for password.
GAPPS FIX: In TWRP, goto Mount > system_root and try reflashing.
FAQ:
How is it different from other TWRPs available for lavender ?
This build uses standalone decryption which is better than the recoveries using vold decrypt as vold decrypt will fail if system ROM is corrupt or wiped
Credits:
Huge thanks to @abhishek987 and @vasishath for helping
@tufadorin @faraz shafi (For testing)

Reserved

Work fine with encryption

This is working with Global Variant ? greatz ...

It works well. Just one detail. You can not see the clock, because it appears in the same place as the camera.
Thank you for everything.

Just 5 more days left to test this ?

Can you install official miui ota zip after installing twrp and magisk?
Would it brick the device?

Nice built.. I think official build arrives soon

strange behaviour: TWRP is asking for pattern decryption when PIN is used and vice versa.
Decryption via command line works fine.

vkmcondor said:
Can you install official miui ota zip after installing twrp and magisk?
Would it brick the device?
Click to expand...
Click to collapse
It won't brick the device, but no you can't install them.
The update will just fail and reboot you back into MIUI. Everything working as usual.
If you want TWRP/Magisk installed and get updates then you'll have to manually download the 'Recovery ROM' to the update you want to update to. Then flash it in TWRP like you would a custom ROM.
You'll want to reinstall Magisk after you flash the Recovery ROM to get root back.
TWRP remains intact

Enddo said:
It won't brick the device, but no you can't install them.
The update will just fail and reboot you back into MIUI. Everything working as usual.
If you want TWRP/Magisk installed and get updates then you'll have to manually download the 'Recovery ROM' to the update you want to update to. Then flash it in TWRP like you would a custom ROM.
You'll want to reinstall Magisk after you flash the Recovery ROM to get root back.
TWRP remains intact
Click to expand...
Click to collapse
Do I need to format or wipe data?

great work, just need a few days to unlock my bootloader and try this one

Diniodoc said:
strange behaviour: TWRP is asking for pattern decryption when PIN is used and vice versa.
Decryption via command line works fine.
Click to expand...
Click to collapse
same happend to me.can you explain how you fixed it via commandline ? i have to wipe phone and flashed successfully Xiaomi.eu rom . i have global device.
also i flashed now Magisk 19.0 .and it works.
much thx for your work admin ?

majo3000 said:
same happend to me.can you explain how you fixed it via commandline ? i have to wipe phone and flashed successfully Xiaomi.eu rom . i have global device.
also i flashed now Magisk 19.0 .and it works.
much thx for your work admin ?
Click to expand...
Click to collapse
I did not fix it, but you can decrypt your /data via terminal in TWRP : "twrp decrypt PIN"
But I didn't understand you, are you still facing that problem or did you solved it by reflashing MIUI?

Diniodoc said:
strange behaviour: TWRP is asking for pattern decryption when PIN is used and vice versa.
Decryption via command line works fine.
Click to expand...
Click to collapse
Due to a bug in android pie, the recovery may ask for pattern if you have set PIN/password for encryption (and vice-versa). Unfortunately, to fix this you need to format your data partition and ask the developer of ROM to include this commit.
Updated in OP

vkmcondor said:
Do I need to format or wipe data?
Click to expand...
Click to collapse
Not if you're just manually updating by flashing the Recovery ROM. Think of it as a dirty flash a custom ROM. Just install it on top of your current build and then flash your Magisk ZIP and any other mods that may have been overwritten (due to needing to patch the boot.img

Diniodoc said:
I did not fix it, but you can decrypt your /data via terminal in TWRP : "twrp decrypt PIN"
But I didn't understand you, are you still facing that problem or did you solved it by reflashing MIUI?
Click to expand...
Click to collapse
i was first on original rom.then i flashed TWRP from here.after reboot i hang on screen were i have to enter password to access android.so i never have set a password and tryed mi Pin and miui Account password...but none pin was acceptet.
then i wiped data ...reboot ...but android doesnt load.
so i flashed xuaomi.eu Rom . after flashing it .the phone startet succesfully....
the thing is.... i never entered a pin or password to dercrypt my device....and what helped was wipe and flash rom .... greatz..

I am getting error 64 when flashing arm64 gapps.

ebautista said:
I am getting error 64 when flashing arm64 gapps.
Click to expand...
Click to collapse
Why did you even flash gapps?

thelazyindian said:
Due to a bug in android pie, the recovery may ask for pattern if you have set PIN/password for encryption (and vice-versa). Unfortunately, to fix this you need to format your data partition and ask the developer of ROM to include this commit.
Updated in OP
Click to expand...
Click to collapse
Good to know THX. I'm still using original MIUI so I think there is nothing to do than waiting or better use a custom ROM
One more question. Does anybody know if there is the possibility to use a separate password for encryption different from the lock screen? This was possible in earlier versions of Android.

[RECOVERY][RMX1971][UNOFFICIAL] TWRP 3.3.x for Realme 5 Pro / Realme Q

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Backups works
- Flash Rom works
- Sdcard works
Download:
TWRP
To Flash the TWRP:
Code:
fastboot flash recovery twrp-RMX1971-20191017.img
Then reboot in TWRP manually.
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/thesprintster/device_realme_RMX1971/commits/android-9.0
Precompiled Stock Kernel in use
Credits:
Thanks to other testers for the tests and the support
Created 2019-10-17
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[RECOVERY][3.3.1-14][RMX1971]Unofficial TWRP for Realme 5 Pro (Stable), Tool/Utility for the Realme 5 Pro
Contributors
thesprintster, mauronofrio
Source Code: https://github.com/thesprintster/device_realme_RMX1971/commits/android-9.0
Version Information
Status: Stable
Created 2019-10-17
Last Updated 2019-10-17

Reserved

Why is there 3.3.1-9 in the download and 3.3.1-14 in the title? Did you share accidentally an older version or mistake in title?

greenys' said:
Why is there 3.3.1-9 in the download and 3.3.1-14 in the title? Did you share accidentally an older version or mistake in title?
Click to expand...
Click to collapse
mistake in title

thesprintster said:
mistake in title
Click to expand...
Click to collapse
Ah, I see. Thank you.
Edit.: You accidentally edited the title wrong. Noe it's 3.3.1-19 instead of 3.3.1-9.

Thanks dev for recovery. My phone has been trapped in bootloop after flashing magisk 20.0 . I have twrp back-up in my sd card and I'm restoring backup again. I was flashing to install titanium plus and vanced YouTube

Amot00 said:
Thanks dev for recovery. My phone has been trapped in bootloop after flashing magisk 20.0 . I have twrp back-up in my sd card and I'm restoring backup again. I was flashing to install titanium plus and vanced YouTube
Click to expand...
Click to collapse
How did you flash magisk? I mean first you gotta unlock bootloader. Did you successfully use in-depth test.

will try it soon..
On screen shot its lineage os.. ?

How to unlock the bootloader on Realme 5 Pro?
I mean there's no any tutorial to unlock it yet.. I found some tutorials on google but it doesn't look trusted..
Mustn't we unlock it first then eventually can install twrp ?

jijoejoe123 said:
will try it soon..
On screen shot its lineage os.. ?
Click to expand...
Click to collapse
Yes! I definitely need it!

New build guyz, fixed external sd card mounting. Link in 1st post.

Aizenmas said:
How to unlock the bootloader on Realme 5 Pro?
I mean there's no any tutorial to unlock it yet.. I found some tutorials on google but it doesn't look trusted..
Mustn't we unlock it first then eventually can install twrp ?
Click to expand...
Click to collapse
Go through : https://www.youtube.com/watch?v=FyEEmaaQZh8

Finally , a good news

Failed backup system image (size 5GB).. how to do?

thesprintster said:
New build guyz, fixed external sd card mounting. Link in 1st post.
View attachment 4847759
Click to expand...
Click to collapse
After bootloader unlock and following instructions it says failed to mount system_root and can't flash anything. Especially not lineage os, opengapps and magisk.

greenys' said:
After bootloader unlock and following instructions it says failed to mount system_root and can't flash anything. Especially not lineage os, opengapps and magisk.
Click to expand...
Click to collapse
Yes, this twrp is junk
i can not flash rom lg16 or stock rom ( stock rom convert opzip to zip) ,devices bug mount system_root

I got bootloop after install Rom Lineage, how to fix it?

29y6145 said:
Yes, this twrp is junk
i can not flash rom lg16 or stock rom ( stock rom convert opzip to zip) ,devices bug mount system_root
Click to expand...
Click to collapse
-----------------------------
TWRP flashing and LenageOS installation REALME 5 pro/Q
1)make sure that your bootloader is unlocked.
you can vist this link https://c.realme.com/in/post-details/1184734239149522944 OR
this youtube video
for referance
2)after you have a unlocked bootloader, download the neccessory files required in your PC
===>platform tools (fastboot files) link: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
===>TWRP recovery img . link: https://drive.google.com/drive/folders/1_pRUK4bj74N6xErkpFLr--2GoKyGxUtl
===> vbmeta img . link: https://drive.google.com/file/d/1kq9rV3eF8rYAUwmUvXo-8vttYIhVcQCb/view
===>Leneage OS for realme 5 pro . link:https://drive.google.com/drive/folders/1wa4bllIa6WgH1STAszdxC_xkBTEHDSiT
3) once you have all the files
flash the vbmeta.img with fastboot..
COMMAND : fastboot flash vbmeta vbmeta.img
4) after that flash the recovery
COMMAND: fastboot flash recovery twrp-RMX1971-20191018.img
5) after that reboot into recovery by pressing the volume button on your phone and see " reboot recovery" in a red font
and press power button when u see that.
--.OPTIANAL AND RISKY step {IF YOU WANT TO BOOT INTO COLOROS AFTER INSTALLING TWRP, FLASH THE TWRP RECOVERY IMG AS BOOT ,i dont know this work in new twrp.but worked for me(fastboot flash boot twrp-RMX1971-20191018.img )}
6)after u successfully get the twrp menu make a backup of your whole system(all partitions) in case something goes wrong and move the backup into a lap or memory card
7)install the LenageOS and gapps . and reboot into fastboot mode and do step 3 again but this time flash vbmeta.img from this link:https://drive.google.com/drive/folders/1wa4bllIa6WgH1STAszdxC_xkBTEHDSiT
8) wipe the whole data partition
9) reboot normally.
IN CASE YOU ARE STUCK IN THE RECOVERY MODE OR FASTBOOT MODE FEEL FREE TO CONTACT ME @azharsalim135
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
DnZX said:
I got bootloop after install Rom Lineage, how to fix it?
Click to expand...
Click to collapse
For non indian version Need seperate twrp to flash lineage.. It will be available soon. Dev working on it

working instal magisk in stock rom?

puturaya20 said:
working instal magisk in stock rom?
Click to expand...
Click to collapse
Dont try to install in stock rom.. I heard ita giving problems.. Backup stock before trying..

How To Guide [ROM][MIUI][venus] Xiaomi.eu ROM for Xiaomi MI 11

How to install Xiaomi.eu ROM for Xiaomi MI 11
We will release fastboot ROM versions until TWRP for venus is released TWRP is RELEASED
Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!)
- Update your stock ROM to the latest via updater app first..
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file BETA or STABLE
- If you are on Windows: Right click on downloaded zip - Settings - Unblock zip content
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via original USB cable
- Run fastboot installation script as administrator from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot its done (first boot may take up to 15min)
Steps to install update of xiaomi.eu ROM (All your data and files on internal storage will NOT be deleted!)
- Download our ROM zip file WEEKLY or STABLE
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_update_rom.bat
For Linux ./linux_fastboot_update_rom.sh
For MacOS ./macos_fastboot_update_rom.sh
Update guide on the video
- After reboot its done (first boot may take up to 10min)
Update via OTA:
Installation via OTA is currently not possible due to missing TWRP
Updater will notify you about new version and download it to your device for you
You have to copy it to your PC, unpack it and run fastboot_update_rom sctipt
Enjoy..
-----------EDIT 20.5.2021--------------
Since weekly 21.5.20, we are releasing TWRP version of our ROMs for MI11...
TWRP install via fastboot command
Code:
fastboot boot twrp.img
To change TWRP language to English, press bottom right button and select English..
TWRP for MI11 venus
For install ROM, just select in TWRP - Install - ROM zip - reboot
Enjoy..

Thanks for the ROM. Once my bootloader is unlocked I'll flash the ROM and report it.

Stupid question but EU network band work as it should ? L1 certificate? What about Google pay?

Lione2 said:
Stupid question but EU network band work as it should ? L1 certificate? What about Google pay?
Click to expand...
Click to collapse
all OK..

My xiaomi 11 still waitong for boatloader unlock 168 hours, will try it once unlocked

Is root possible?

I will try it in 6 days too.

pittrich said:
Is root possible?
Click to expand...
Click to collapse
use magisk patch boot.img, then flash it.

ingbrzy said:
Click to expand...
Click to collapse
Thx Master ! will try

ingbrzy said:
How to install Xiaomi.eu ROM for Xiaomi MI 11
We will release fastboot ROM versions until TWRP for venus is released
Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file xiaomi.eu_multi_MI11_21.1.13_v12-11
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot its done (first boot may take up to 15min)
Steps to install update of xiaomi.eu ROM (All your data and files on internal storage will NOT be deleted!)
- Download our ROM zip file WEEKLY or STABLE
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_update_rom.bat
For Linux ./linux_fastboot_update_rom.sh
For MacOS ./macos_fastboot_update_rom.sh
- After reboot its done (first boot may take up to 10min)
Update via OTA:
Installation via OTA is currently not possible due to missing TWRP
Updater will notify you about new version and download it to your device for you
You have to copy it to your PC, unpack it and run fastboot_update_rom sctipt
Enjoy..
Click to expand...
Click to collapse
Hi, will Google Pay work on this ROM with unlocked bootloader?
I have a Mi11 with a preliminary Global ROM but it's rooted and unlocked and GPay does not allow me to add cards. I managed to unroot (removing /system/xbin/su) but GPay still does not allow me to add cards, so I believe it's the unlocked bootloader.
Is there a way to lock bootloader safely?
I have MiFlash but I've heard that flashing ROM with clear and lock option may brick device.
Thanks

İs there turkish language

google pay works

deepblue2000 said:
google pay works
Click to expand...
Click to collapse
How is this possible?
I understood that GPay would not work with unlocked bootloader...
As I said, I have a Mi11 with a MIUI 12 test build: the ROM is rooted and bootloader is unlocked, I managed to delte root removing "system/xbin/su" but Gpay still refuses to add cards

I just unlocked bootloader, no root ! with root it never worked.
SafetyNet passes
GooglePay is working (added Paypal)

deepblue2000 said:
google pay works
Click to expand...
Click to collapse
How is this possible?
I understood that GPay would not work with unlocked bootloader...
As I said, I have a Mi11 with a MIUI 12 test build: the ROM is rooted and bootloader is unlocked, I managed to delte root removing "system/xbin/su" but Gpay still refuses to add cards
deepblue2000 said:
I just unlocked bootloader, no root ! with root it never worked.
SafetyNet passes
GooglePay is working (added Paypal)
Click to expand...
Click to collapse
Could it be that for test ROM that I have, which comes already rooted, even if I remove manually root, something remains in the system that make safetynet not pass?

maybe that there are some root files or something...
you can try, if you install the xiaomi.eu rom with full wipe/format data.

deepblue2000 said:
maybe that there are some root files or something...
you can try, if you install the xiaomi.eu rom with full wipe/format data.
Click to expand...
Click to collapse
I have two units, so will keep one with official global test build and will flash he other with xiaomi.eu
Is xiaomi.eu working fine? Any drawback? Is iit based on MIUI 12.5?

for me iit works amazingly well !!!
no problems so far. everything is smooth and fast.
yes it is Miui12.5 based

deepblue2000 said:
for me iit works amazingly well !!!
no problems so far. everything is smooth and fast.
yes it is Miui12.5 based
Click to expand...
Click to collapse
Ok, on device 1 I reflashed MIUI 12 test build, I removed root manually, root checker says I am not rooted but safetynet checker fails, maybe because it's not an officially approved Google ROM yet and it's stil an internal XIAOMI test build... After all XIAOMI engineer told me that if I lock the bootloader phone will even stop working (and that is why my 3rd sample got stuck in fastboot: will have to unlock now...)
Will test xiaomi.eu on device 2