Hello,
i have had couple issues so here are my findings, most of them are already nicely described in many topics.
Bricked phone?
For me worked QFIL version 2.0.0.5, using the installer, by the "portable version" errors can be generated:
A nice video tutorial how to use QFIL and restore the image, QFIL and QUALCOMM driver included:
https://www.techpoison.in/2017/12/how-to-flash-letv-le-2-x526-stock.html
To enter the "flash" mode: Press and hold at the same time VOLUME UP, DOWN, POWER for like 10 seconds until you see that the device manager recognized new "hardware". For a detailed tutorial plase follow the video tutorial in the above link.
Should you have problems during the flash process, disconnects and so on, try to use USB 2.0 port.
Version 13s will be restored, please download thee X526 restore image from the Unbrick section or the Indian sparse image from the link above.
Baseband issues after restore / general baseband issues:
After restore "unknown baseband"? Just reset the factory settings on the 13s and let it reboot couple times, it will reboot automatically each 2-3 minutes - let it reboot after the restore 3-4 times. Afterwards copy the stock 21s to internal storage and rename it to update.zip, go to settings,system update and select local update, it should reboot automatically. Its possible that you will get an error message after the 1st reboot - APK not found. Reboot it to OS and delete the update.zip from the internal storage, maybe its not necessary to delete it, but i did it and copied it back, selected local update and voila system updated to 21s, my baseband was back and sims were "fully" functional, 4g/LTE didnt work - baseband was MPSS.TA.2.1.C7-68083.
"I tried to reflash back the stock version using TWRP, stock recovery and also the chinesse TWRP - didnt work at all. "
4g/LTE issues, only 3g works (tested in EUROPE)?
I have flashed all of the modems, bootloaders, different ROMs but it didnt help at all. So i rebooted the phone to fastboot and using the ADB minimal from the CMD i erased both modems, please be sure you have the package of your phone with both IMEIs, in some cases its not necesssary. WCDMA 3G worked fine, i had only issues with 4g/LTE.
IMEI TOOL + drivers link:
https://forum.xda-developers.com/le-2/development/tools-unbrick-thread-leeco-le-2-x52x-t3634609
Imei restore on EUI and other ROMs:
https://www.gizmochina.com/2017/02/17/leeco-letv-imei-repair-qualcomm-models/
Commands to erase the modems: fastboot erase modemst1 and modemst2. I did it on 21s and reflashed the phone using QFIL back to 13s and both sims were already fully functional and 4g/LTE too.
If you do not see any IMEI use the Qualcom Imei Restore application - unbrick section, baseband was back, but i just had to restore the IMEIs, but i saw it only on MIUI 10 8.8.9 global - on MIUI enable the diag port using MINIMAL ADB from the commandline:
MIUI is prerooted, so there shouldnt be issues with root privileges.
Commandline - minimal adb:
adb shell
su
setprop sys.usb.config diag,adb
and run the IMEI restore tool.
In device manager you should see the qualcomm diag port - if you need the qualcomm driver please see the unbrick section.
Before i also tried to type in the dialer *#*#4636#*#* and tried to change the network manually, didnt help at all, tried like 3 sim cards from various operators here supporting 4g with a good coverage.
My phone is fully functional now and 4g/LTE works perfectly.
During all my tests, flashing and so on, if you have issues with a bootloop /custom rom/ and you have flashed already different modems = for me worked the 21s bootloader + modem, fixed most of the bootloops.
Link 21s bootloader + modem:
https://drive.google.com/file/d/0B_RkWxhSoWNLWmJJYmFxTGxlMHM/view
Sorry for my bad english, i am not a native speaker All the links are not mine.
ok ... first of alll ....thank for your effort to explain..........
i have tryed most of your solution on my leeco le 2 X526 version and didn't work for me to have a stable 4G signal on my digi mobil carrier from Europe (signal is dies inside house) ......but ...... can you please be a little more precise ?
//// you say that i should restore 13S stock version , take care of my IMEIs , install version modem MPSS.TA.2.1.c7-00008-8976_GEN_PACK-1.64611.1.68083.1 (your download with (TWRP ycjeson or 3.2.1.0) or fastboot flash modem non-hlos.bin if i have custom rom -RR 6.0 my case as a first try) .....and then remain on eui 13S or custom rom (miui version ??? . or other ) ?
perhaps is no need a step by step ....... but .... still ........ with your help .....maybe will be a real solution ...... thank you in advance .
Related
Hello today I am going to share you how to install stock rom in asus zenfone 4 using raw file
first you must install these :
Intel Usb Driver: http://d-h.st/VfO
Asus Flash Tool Installer: https://yadi.sk/d/K5UINtv9e9ehP
Asus zenfone 4 raw file: http://www.mediafire.com/download/prtp8p7ok6s9izf/Zenfone+4+V4.3.10.raw
After you install, follow my steps carefully
1.boot your phone into droidboot by pressing power + vol up
2.In your pc open asus flash tool
3.In asus flash tool choose model (P400CG) Wipe data (yes) and choose the raw file
http://s10.postimg.org/7ybzsv0xl/Step_1.jpg
4.plug your phone to your pc/laptop
5.after you plug your phone you will see a serial number , and click your device
http://s30.postimg.org/729moup4h/Step_2.jpg
6.start flashing
http://s27.postimg.org/shru3ater/Step.jpg
7.after flashing ,your phone will automatically reboot
8.Enjoy
Thanks guys
or just place raw file in ext sd card and perform SD download from droidboot
Yep..
Sent from my ASUS_T00I using XDA Free mobile app
Cant make use of AFT
I am unable to select the downloaded .raw file in AFT.
the only supported formats are .img or .zip
how can I flash the stock .raw file.
nor the SD DOWNLOAD in Droidboot mode recognizes this raw.file
I have tried to download it more than 4 times thinking that file might have currupt. but same result every time.
Please help
Edit:
anyways I got to learn how to select the file but now when I connect my device to PC in droidboot mode, error message pops asking to close AFT. I can Ignore the error msg to keep it running but No device is being detected in AFT.
That error comes every time I connect or remove device from PC.
This is where I need help.
or simple suggest me a full solution o below situation:
Device ASUS ZENFONE 4_T00I
Last working firmware was Jellybean 4.2.2 (never upgraded)
Problem started: Consistent FC msgs of almost all msgs.
1. Droidboot State
Droidboot Version: 6.6.3.0
Product : WW_ZENFON
Not Rooted. No Custom Recovery
2. Device Status: Was on Stock Jelly bean and was contineously giving com.android.phone failure and other FC closure consistently , hence needed to try flasing a new rom or same version.
3. Read the forums and collected following data:
Stock Firmwares:
UL-ASUS_T00I-WW-6.6.3.0_user.zip
UL-ASUS_T00I-WW-7.4.4.0-user.zip
UL-ASUS_T00I-WW-9.9.9.0-user
Raw Firmware:
Zenfone4V4.3.10.raw
4. All the Tools required to flash the firmwares and study of methods to do so. I used WIN-XP and tools installed on the same. All Drivers installed successfully device recognizing and able to use fastboot and adb.
5.Current device status: To flash UL-ASUS_T00I-WW-6.6.3.0_user.zip
I tried following methods :
FW placed on SD Flashing started but failed everytime
Tried Fastboot flash update FW.zip method by cleaning all partitions- Failed "Problem in creating otp update file-error)
Now left with no system, no userdata or no data partitions on device.
Now trying AFT method to flash .raw firmware which I have downloaded.
AFT not at all listing up my device in Droidbot mode.
VioletR said:
I am unable to select the downloaded .raw file in AFT.
the only supported formats are .img or .zip
how can I flash the stock .raw file.
nor the SD DOWNLOAD in Droidboot mode recognizes this raw.file
I have tried to download it more than 4 times thinking that file might have currupt. but same result every time.
Please help
Edit:
anyways I got to learn how to select the file but now when I connect my device to PC in droidboot mode, error message pops asking to close AFT. I can Ignore the error msg to keep it running but No device is being detected in AFT.
That error comes every time I connect or remove device from PC.
This is where I need help.
or simple suggest me a full solution o below situation:
Device ASUS ZENFONE 4_T00I
Last working firmware was Jellybean 4.2.2 (never upgraded)
Problem started: Consistent FC msgs of almost all msgs.
1. Droidboot State
Droidboot Version: 6.6.3.0
Product : WW_ZENFON
Not Rooted. No Custom Recovery
2. Device Status: Was on Stock Jelly bean and was contineously giving com.android.phone failure and other FC closure consistently , hence needed to try flasing a new rom or same version.
3. Read the forums and collected following data:
Stock Firmwares:
UL-ASUS_T00I-WW-6.6.3.0_user.zip
UL-ASUS_T00I-WW-7.4.4.0-user.zip
UL-ASUS_T00I-WW-9.9.9.0-user
Raw Firmware:
Zenfone4V4.3.10.raw
4. All the Tools required to flash the firmwares and study of methods to do so. I used WIN-XP and tools installed on the same. All Drivers installed successfully device recognizing and able to use fastboot and adb.
5.Current device status: To flash UL-ASUS_T00I-WW-6.6.3.0_user.zip
I tried following methods :
FW placed on SD Flashing started but failed everytime
Tried Fastboot flash update FW.zip method by cleaning all partitions- Failed "Problem in creating otp update file-error)
Now left with no system, no userdata or no data partitions on device.
Now trying AFT method to flash .raw firmware which I have downloaded.
AFT not at all listing up my device in Droidbot mode.
Click to expand...
Click to collapse
You need AFT version 1.0.0.0 for RAW files. See here: http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=3567
Solved
I flashed v6.3.5.0.img.gz successfully using droidboot.
Thanx a lot.
Now i an on Lollipop v7.4.4.0 thanx for all help
Solved
Root
Does it require root permissions ? Because i have heard that flasing like this can burn the motherboard please tell ... :crying::crying:
No it can if u flash it 100or200 times
I jab flashed roms in my ZenFone 400cg 90 to 110 times either cm or zenui.. lol... nothing happened
Sent from my ASUS_T00I using XDA Free mobile app
thank you so much Techjohn9 and other guys, this thread is really helpfull...
but my navigation buttons (home, back and window toggle) are not working......
please suggest me some solutions ...
I'm using Asus zenfone 4 a400cg mobile droid version 6.6.3 WW I downloaded UL Asus tool firmware 6.6.3 WW and tried to flash error msg coming like image SKU is not match help me to solve this problem
I actually downgraded from lollipop to jellybean,flashing was successful. But the problem is now the back,home and multitask touchpads are not working. It was working fine in the lollipop version, i don't know what happened. Please help me...
I've the same problem. Do you have any remedy?
VioletR said:
I flashed v6.3.5.0.img.gz successfully using droidboot.
Thanx a lot.
Now i an on Lollipop v7.4.4.0 thanx for all help
Solved
Click to expand...
Click to collapse
Give me img v6.3.5, Please.
No man it is not working this time my mobile got stuck in bootloop
Update
mrvj123 said:
thank you so much Techjohn9 and other guys, this thread is really helpfull...
but my navigation buttons (home, back and window toggle) are not working......
please suggest me some solutions ...
Click to expand...
Click to collapse
Update your Asus Zenfone 4 > UL-ASUS_T00I-WW-6.6.3.0-user :laugh: :good:
mrvj123 said:
thank you so much techjohn9 and other guys, this thread is really helpfull...
But my navigation buttons (home, back and window toggle) are not working......
Please suggest me some solutions ...
Click to expand...
Click to collapse
bro u got any fix?
The links in the OP are absolute poison!
Are the files available from any other source?
Where can I find ASUS_BUNDLE.ZIP which droidboot requires?
Hello ! I've tried to unlock bootloader at first and succeeded in that when i was on the lollipop . Unlocking is done by the unlock tool provided by the ASUS Officials.
Then i flashed the cynogen 12.1 unofficial via a boot.img , atwrp v3.img & a system.img.
Everything was fine until i needed to revert back to stock firmware.
And also everytime when i try to boot into recovery via Power & volume (-) button , it boots into system.
I used "adb reboot recovery" to boot into twrp recovery .
So, to revert back i saw a method in which we flash a raw firmware , and i downloaded a 4.0.3 for Asus Zenfone 4.
But after flashing it , the bootloader i unlocked , got locked by itself (means i can open droid boot but cannot modify boot and recovery partition via "fastboot flash boot boot.img" & "fastboot flash recovery recovery.img" ).
I can only flash system via " fastboot flash system system.img".
I tried to unlock it on Jelly Bean but no success.
Also i tried updating the firmawre via OTA and flashing zip in recovery mode but i was not able to boot into recovery mode, even with "adb reboot recovery".
It always ends up with a reboot , then booting into a 'Android logo for 200 to 300 millisec' , & then boot into system.
Then i found a KitKat firmware raw file , but when i flashed it via AFT 1.0.0.0 , it always gives error "no space left for flashing modem binary".
I tried "fastboot erase data" ,"fastboot erase userdata" ,"fastboot erase cache" , & "fastboot erase system" , but ended up with stock rom with no modem binary.
So , i tried to unlock the bootloader again by the "unlock tool" provided by ASUS , but even after connected to a high speed Wifi , It gives connection error and rest of the other things are working fine like browser etc.
I also tried to flash the modem.zip inside the stock firmware zip via fastboot as : "fastboot flash update modem.zip. It has flashed the zip but still no modem binary.
Then i tried to flash the bin file inside the modem.zip as : fastboot flash radio radio_firmware.bin and it gives error : No space left for flashing modem binary.
Now i have a bootloader (locked) but no recovery and a stock firmware with no modem binary.
Cn to ww
Hello, I have a big issue with my zenfone4 max plus zc550tl. I received the phone with a CN rom and after update to new version I lost all languages except chinese and english and every google apps. Someone can help me? I need to change my rom from CN to WW or to recovery old Rom 18. Help!!
AlfredDispi said:
Hello, I have a big issue with my zenfone4 max plus zc550tl. I received the phone with a CN rom and after update to new version I lost all languages except chinese and english and every google apps. Someone can help me? I need to change my rom from CN to WW or to recovery old Rom 18. Help!!
Click to expand...
Click to collapse
This forum is only for Asus Zenfone 4 A400CG and A450CG; which is a 4 year old device; and should not be confused with the new Zenfone 4(s).
We all know about this trauma while reinstall the stock firmware or doing normal update to our phone, also we've try a lot of guides on Google and no one it's work? no problems, in this final solution I'll help you how to get device restores with worked baseband and no rebooting anymore, just sit, read carefully and apply the steps.
P.S.: if there're any similar guide feel free to remove it, I'm not sure about that.
Requirements:
TWRP 3.0.2 ( I use the one from Honor 4C which contain the option to wipe Cust partition).
Single Sim unbrick files or.
Dual Sim unbrick files. (to download the correct firmware for your variant just check Chapter 4: Unbricking.
Unlocked bootloader (you know how to do that).
Fastboot tools that you'll find inside unbrick files roms.
Balong patch: check attached files, put into phone memory in a folder called dload and flash via Local Update (do this step ONLY after flash the firmware and see BalongV100R001C50B311 or similar)
Compatible Roms:
Emui 3.1 both single and dual sim.
Emui 4.0 not tested yet, but should work.
Same thing for OTA update, in case of getting problems just download the full rom and extract
the cust partition of same installed ota version then follow steps solve reboot problems
Steps
Once the firmware is booted fine, you'll see the stock aosp background and missed applications and features which is gone, that's mean the cust partition is not flashed at 100%, here how to fix the problem.
Download the TWRP of Honor 4C (don't worry they are similar phone, tested by myself).
Rename the image to twrp.img and pust inside fastboot folder, reboot phone into fastboot mode and run fastboot flash recovery twrp.img .
Reboot into recovery, click on Wipe then choose ONLY Cust partition.
Reboot to Bootloader from Reboot menu inside recovery.
All you have to do is reflashing cust image by fastboot flash cust cust.img .
IF you see signal of sim and it operator name, your device and missed apps or features has been fixed and restored as well.
IF you see Balong bug in "Build Number" in about setting, just flash the update.app that you have to put it inside dload folder and download from attached files to resolve the problem, if you see this tutorial is helped you, just hit thank
I was using rooted stock rom lex526. I installed shortcut master lite apk though play store. While browsing though secret code in it, I somehow messed up mbn test configurations .
Now I can only use 4g sim only in either sim slot. Other Vodafone sim is not detecting in any sim slot .
I tried flashing firmware through twrp by Rishabh Rao . But after 15℅ phone reboots. So I guess I can't flash firmware through twrp.
Then i get back to stock by flashing original stock rom , but still I can only use one 4g sim .
If anyone can please help me out . And guide me how make both sim working.
Thanks in advance.
https://drive.google.com/folderview?id=0B2O8PS66A_T-a05FQUEyRFNWa1U
Shall I flash baseband ? Which and how ? Please guide me.
I am using 5.8. 019s rom.
Wipe data system cache
Flash any ROM (eUI preferred)
Flash baseband, flash modem
superGuyAdi said:
Wipe data system cache
Flash any ROM (eUI preferred)
Flash baseband, flash modem
Click to expand...
Click to collapse
Can you please explain more in detail how to flash baseband and modem .
I have stock rom downloaded from leeco official website as well as twrp back with firmware. Though I tried restoring backup but it doesn't change anything .
While searching for Network it shows 2g ,3g 4g ranges only if 4g Jio sim present , second sims simply not showing up at all.
Please check Google drive image attached in first post for more information.
http://forum.le.com/in/index.php?th...king-hard-bricked-dead-bricked-devices.17253/
Try following the post worked for me when I hard bricked my le 2, but be cautious and follow steps correctly
Went to fastboot
Fastboot erase modemst1
Fastboot erase modemst2
Reboot twice
And boom ..
Both sim showed up ..working normally.
Updated my new x522 to 5.8.021s now I have no phone or data. It sees the sim and my phone number on the sim but it won't go on the network. Everything else is fine so have 2 questions.
1. Can and how can I flash a new modem to the 5.8.021s firmware?
2. What modem should I use I am in California on T-mobile?
Baseband MPSS TA 2.1 c700008-8976 GEN PACK-1.85233.30.76286.2
EUI version 5.8.021S
Thanks in advance.
Rick
dainbramage said:
Bought this phone last week off ebay thought I would update the firmware so I found the 5.8.021s file and did the update ZIP. It updated fine and everything worked except the phone. It shows the sim card as t-mobile with my phone number and cellular data calls and messages as t-mobile but when I try search for network I get "error searching for network". I tried different sims that I know are good and nothing works. I would return it to the original firmware but I wasn't smart enough to back it up. I would flash a new modem if I knew how maybe that is the problem. I have an x829 as my daily driver this was going to be a birthday gift.
Baseband MPSS TA 2.1 c700008-8976 GEN PACK-1.85233.30.76286.2
EUI version 5.8.021S
Thanks in advance.
Rick
Click to expand...
Click to collapse
Seems like you flash a wrong ROM that is meant for different country.
Download EUI stock official ROM which is meant for your country then flash it with chinese twrp once you flash it
Fixed it. Installed the small EUI by aurel. He had a note about my predicament on the first page. Great ROM for me and a big thank you to him. So here is what I did. Probably would have worked on the 21s too.
1. Download the adb, fastboot drivers
2. Install it on your PC.
3. Restart the phone in fastboot mode (power + vol down)
4. Type this commands in the terminal:
Quote:
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
5. Done.
Thanks again
I got this problem fixed after using fastboot erase persist, and fastboot flash persist /directory/persist.img.
I Got stocked after trying used fastboot erase (each of my partitions) and well not remember what more i did. Just tried installing a lot of stock custom rooms (that not worked) and also remember that the twrp keeping said not able to mount persist partition.
V2056A | PD2056 | 5G China variant
- PD2056B_A_1.11.13 HERE Android 11
thats good!
and how can i flash it?
My device is last week broken . is the rom flashable with fastboot? thx mike
How did you broken the device?
You can simply upload zip on device with adb command and flash by using stock recovery mode
adb push .....
I tried to flash my patched boot.img (via_magisk) with the MTKROOT V2.5.5 tool. -https://www.ayudaroot.com/root/vivo/como-rotear-los-telefonos-vivo-x60-pro-plus . The first problem was unlocking the bootloader. That did not make the tool. The tool failed .. I unlocked that manually in fastboot mode. After the bootloader was open, I tried the tool for the second time.
That was probably the serious mistake! The tool has transferred the patched boot img. So far everything was o. K. Then I booted to the Recovery Menu to clean the data and cache partition. (Factory Reset). Then restart system. Since then I have a bootloop and it was not possible to boot into recovery mode.
Then I flashed from the Indian Rom the boot and the recovery image.
Now the device booted again in Indian Recovery Mode (English). Then I tried to execute the recovery WLAN update. Unfortunately, the system has found no access points when searched.
!! F *** K !!
The next day I tried to flash the original CN-ROM with the QPST flashtool from https://www.needrom.com/download/vivo-x60-pro-plus/ ..
Here I had problems installing the Qualcomm driver for the EDL download mode or to boot the device in the EDL mode.
Without success!
Finally, I tried to flash all the items of the CN-ROM from Needrom via Fastboot. The Flash order of the items I had from the partition.xml file on the CN-ROM.
But I still have a bootloop ..
No access to the recovery WLAN Update-No networks are displayed ..
Do you have an idea for the EDL download mode?
88user88 said:
I tried to flash my patched boot.img (via_magisk) with the MTKROOT V2.5.5 tool. -https://www.ayudaroot.com/root/vivo/como-rotear-los-telefonos-vivo-x60-pro-plus . The first problem was unlocking the bootloader. That did not make the tool. The tool failed .. I unlocked that manually in fastboot mode. After the bootloader was open, I tried the tool for the second time.
That was probably the serious mistake! The tool has transferred the patched boot img. So far everything was o. K. Then I booted to the Recovery Menu to clean the data and cache partition. (Factory Reset). Then restart system. Since then I have a bootloop and it was not possible to boot into recovery mode.
Then I flashed from the Indian Rom the boot and the recovery image.
Now the device booted again in Indian Recovery Mode (English). Then I tried to execute the recovery WLAN update. Unfortunately, the system has found no access points when searched.
!! F *** K !!
The next day I tried to flash the original CN-ROM with the QPST flashtool from https://www.needrom.com/download/vivo-x60-pro-plus/ ..
Here I had problems installing the Qualcomm driver for the EDL download mode or to boot the device in the EDL mode.
Without success!
Finally, I tried to flash all the items of the CN-ROM from Needrom via Fastboot. The Flash order of the items I had from the partition.xml file on the CN-ROM.
But I still have a bootloop ..
No access to the recovery WLAN Update-No networks are displayed ..
Do you have an idea for the EDL download mode?
Click to expand...
Click to collapse
My PC is over adb unautorized, after the Factory reset...
I managed to get this full rom from Recovery, there is a option to download the full last rom and burn. I use another phone with photo google translator to navegate in the menu.
I know this option with the update from the WLAN - but this option is no longer available to me - after the search for a network is completed, no further networks are displayed. He doesn't find any networks.
And the second problem was - I cannot import this Update.zip into the main directory because the PC is unauthorized.
It wasn't just the MTK tool that was wrong.
I think our mistake was you mixed recovery and boot of another Rom. I did that many years ago with Huawei but for me it was a hard brick. Better not mix!
yes i think thatat too. first step now- i try to put the phone in EDL download mode. Then I could try the Qualcomm Flash Tool -. .. But thank you anyway.
with which command did you unlocked the bootloader? I can't find a way.
@88user88 : i wish you the best.
Do you see a way to flash the indian ROM?
Question was not for me but:
I think i have a way that works. But for that I need the command to unlock the bootloader. Because none of the normal ones works.
DPMDP said:
with which command did you unlocked the bootloader? I can't find a way.
Click to expand...
Click to collapse
+1
wolfgart said:
V2056A | PĐ2056 | Biến thể 5G Trung Quốc
- PD2056B_A_1.11.13 TẠI ĐÂY Android 11
Click to expand...
Click to collapse
hello i am a new user in vietnam, can you guide me in detail how to install . Thank you very much
I spent almost 5 hrs yesterday tried to flash from CN ROM, Origin OS to Global ROM, FunTouch OS. I used several methods including AFTool, QFIL, and QPST tool. None of them succeed.
AFTool - failed to flash because missing Fastboot batch file in the global firmware.
QFIL - failed to flash because, Qualcomm Driver 9808 not detected.
QPTS - failed to flash because, Qualcomm Driver 9808 not detected.
I like Origin OS but the reason I want to change to FunTouch OS is because Origin OS didn't come with Google Mobile Seevice package. In fact, 'Hey Google' also didn't worked out.
DPMDP said:
Question was not for me but:
I think i have a way that works. But for that I need the command to unlock the bootloader. Because none of the normal ones works.
Click to expand...
Click to collapse
OK, if we manage to restore my device, I'll give you instructions on how you can unlock your bootloader. then at least I know that in an emergency you also have the option to restore your device.
otherwise it would be too unsafe for me ...
ok?-now you come!
astrofahim said:
I spent almost 5 hrs yesterday tried to flash from CN ROM, Origin OS to Global ROM, FunTouch OS. I used several methods including AFTool, QFIL, and QPST tool. None of them succeed.
AFTool - failed to flash because missing Fastboot batch file in the global firmware.
QFIL - failed to flash because, Qualcomm Driver 9808 not detected.
QPTS - failed to flash because, Qualcomm Driver 9808 not detected.
I like Origin OS but the reason I want to change to FunTouch OS is because Origin OS didn't come with Google Mobile Seevice package. In fact, 'Hey Google' also didn't worked out. YouTube Vanced also always failed to open.
Click to expand...
Click to collapse
same here, my device is iqoo 7 cn origin os i downloaded from android 12 website, failed to upgrade in recovery mode when in hardware check.
both on funtouch os and android 12
Hi, does anyone know where it is I can find this PD2056C_A_1.14.1 firmware
the command menu of the recovery mode of the Chinese version and in Chinese or English