Related
I have a very new Mi A2 now stuck in "edl 9008"
I had tried flashing Mi 6X MIUI 9.X, only later did I come to find out about the anti-roll back issue.
I have tried the below:
MiFlash tool just fails with "Cannot receive hello Packet"
Qualcomm QiFlash fails with "Only nop and sig tag can be recevied before authentication"
Phone is Mi A2 SDM660 4GB/32GB
Please be merciful with the "noob bashing".
Regards
Droid-KE said:
I have a very new Mi A2 now stuck in "edl 9008"
I had tried flashing Mi 6X MIUI 9.X, only later did I come to find out about the anti-roll back issue.
I have tried the below:
MiFlash tool just fails with "Cannot receive hello Packet"
Qualcomm QiFlash fails with "Only nop and sig tag can be recevied before authentication"
Phone is Mi A2 SDM660 4GB/32GB
Please be merciful with the "noob bashing".
Regards
Click to expand...
Click to collapse
i'de the same problem
i solved downloadind the official rom (A2 global) from http://en.miui.com/download-353.html (at the moment jasmine_global_images_V9.6.10.0.ODIMIFE_20180731.0 000.00_8.1_2aeda83301.tgz)
than i rebooted into bootloadr
adb reboot bootloader
and then manually flashed all "images" foler files (copying from script flash all bat), this because some img flash file went in error and the script (if launched automatically) stop working at the first error
fastboot flash bluetooth_a C:\adb\images\bluetooth.img
fastboot flash bluetooth_b C:\adb\images\bluetooth.img
fastboot flash devcfg_a C:\adb\images\devcfg.img
fastboot flash devcfg_b C:\adb\images\devcfg.img
fastboot flash dsp_a C:\adb\images\dsp.img
fastboot flash dsp_b C:\adb\images\dsp.img
fastboot flash modem_a C:\adb\images\modem.img
fastboot flash modem_b C:\adb\images\modem.img
fastboot flash xbl_a C:\adb\images\xbl.img
fastboot flash xbl_b C:\adb\images\xbl.img
fastboot flash pmic_a C:\adb\images\pmic.img
fastboot flash pmic_b C:\adb\images\pmic.img
fastboot flash rpm_a C:\adb\images\rpm.img
fastboot flash rpm_b C:\adb\images\rpm.img
fastboot flash tz_a C:\adb\images\tz.img
fastboot flash tz_b C:\adb\images\tz.img
fastboot flash hyp_a C:\adb\images\hyp.img
fastboot flash hyp_b C:\adb\images\hyp.img
fastboot flash keymaster_a C:\adb\images\keymaster.img
fastboot flash keymaster_b C:\adb\images\keymaster.img
fastboot flash cmnlib64_a C:\adb\images\cmnlib64.img
fastboot flash cmnlib64_b C:\adb\images\cmnlib64.img
fastboot flash cmnlib_a C:\adb\images\cmnlib.img
fastboot flash cmnlib_b C:\adb\images\cmnlib.img
fastboot flash abl_a C:\adb\images\abl.elf
fastboot flash abl_b C:\adb\images\abl.elf
fastboot flash boot_a C:\adb\images\boot.img
fastboot flash boot_b C:\adb\images\boot.img
fastboot flash system_a C:\adb\images\system.img
fastboot flash system_b C:\adb\images\system.img
fastboot flash vendor_a C:\adb\images\vendor.img
fastboot flash vendor_b C:\adb\images\vendor.img
fastboot flash mdtp_a C:\adb\images\mdtp.img
fastboot flash mdtp_b C:\adb\images\mdtp.img
fastboot flash userdata C:\adb\images\userdata.img
fastboot flash splash C:\adb\images\splash.img
fastboot flash mdtpsecapp_a C:\adb\images\mdtpsecapp.img
fastboot flash mdtpsecapp_b C:\adb\images\mdtpsecapp.img
fastboot flash storsec C:\adb\images\storsec.mbn
fastboot erase ddr
fastboot reboot
Now i've bootloader unlocked but NOT rooted
i wait to find available e secure and easy to root way for my A2
Droid-KE said:
I have a very new Mi A2 now stuck in "edl 9008"
I had tried flashing Mi 6X MIUI 9.X, only later did I come to find out about the anti-roll back issue.
I have tried the below:
MiFlash tool just fails with "Cannot receive hello Packet"
Qualcomm QiFlash fails with "Only nop and sig tag can be recevied before authentication"
Phone is Mi A2 SDM660 4GB/32GB
Please be merciful with the "noob bashing".
Regards
Click to expand...
Click to collapse
did you solved? i'm stuck in 9008 edl mode. after success flashing with miflash the phone doesn't boot up, only edl mode, even if i hold for more than 10 minute power button
michiamoantonio said:
did you solved? i'm stuck in 9008 edl mode. after success flashing with miflash the phone doesn't boot up, only edl mode, even if i hold for more than 10 minute power button
Click to expand...
Click to collapse
Did you try booting to fastboot?
Nebrassy said:
Did you try booting to fastboot?
Click to expand...
Click to collapse
i cant, my phone is only detected as qualcomm 9008, and it is independent of edl point, if i touch them or not, phone will be detected only when i unplug and plug again the cable
michiamoantonio said:
i cant, my phone is only detected as qualcomm 9008, and it is independent of edl point, if i touch them or not, phone will be detected only when i unplug and plug again the cable
Click to expand...
Click to collapse
that is edl mode, try flashing stock again using mi flash then try booting to fastboot
Nebrassy said:
that is edl mode, try flashing stock again using mi flash then try booting to fastboot
Click to expand...
Click to collapse
i flashed with success number of times, but i cuoldn't even boot in any mode, now i'm trying again, but i can't flash with mi flash, it gives me hellopacket error, and can not red from port com error
Phone not turning on
michiamoantonio said:
did you solved? i'm stuck in 9008 edl mode. after success flashing with miflash the phone doesn't boot up, only edl mode, even if i hold for more than 10 minute power button
Click to expand...
Click to collapse
Did you resolve your problem? I am having the same problem - I can flash in EDL mode, but can't power up phone after flashing. It's not responding at all.
talhosvi said:
Did you resolve your problem? I am having the same problem - I can flash in EDL mode, but can't power up phone after flashing. It's not responding at all.
Click to expand...
Click to collapse
Nope, After flash couple of times my phone doesn't respond anymore. Not recognized by PC no boot or fastboot or recovery
Inviato dal mio Redmi 3 utilizzando Tapatalk
Hola acabo de resolver ese problema con el modo testpoint deben desarmar el teléfono antes deben abrir el administrador de dispositivo en su PC he iniciar miflash ya con la ROM stock cargada con mucho cuidado y quitar el conetor de la batería posterior mente el de la huella digital , el conector de la huella digital tiene dos pines pequeños visibles , en esos pines con mucho cuidado tiene que hacer un puente , al hacer el puente si quitarlo meten el cable USB ya conectado a la PC y verán que parpadeo en administrador de dispositivo ahí refrescan en miflash y cargan la ROM stock y listo esperar a que acabe y montar todo el teléfono esperar a que cargue .
before than all disable Driver Signature !
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Download xiaomi USB drives : https://www.teamandroid.com/2018/08/05/xiaomi-mi-a2-usb-drivers-download/
Download Qualcomm HS-USB QDLoader 9008 : https://gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows/
[*Maybe you need : https://forum.xda-developers.com/showthread.php?t=2588979 ]
After installing all drivers reboot pc !
Unlock bootloader : > fastboot flashing unlock / fastboot flashing unlock_critical
Boot from fastboot to edl Mode : > fastboot oem edl
(maybe you can & with this : https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292 )
Now download xiaomi mifash tool & use it : http://en.miui.com/download-354.html > flashing guide > Fastboot method etc....
Read & here : https://forum.xda-developers.com/mi-a2/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824849
(and here some rom builds mia2) : https://www.theandroidsoul.com/xiaomi-mi-a2-update/
https://forum.xda-developers.com/mi-a2/how-to/ota-v9-6-5-0-odimife-t3823445
[MiA2 tool : https://forum.xda-developers.com/mi-a2/development/tool-mi-a2-xtrem-toolkit-t3879660 ]
sry for english
[email protected] said:
Hola acabo de resolver ese problema con el modo testpoint deben desarmar el teléfono antes deben abrir el administrador de dispositivo en su PC he iniciar miflash ya con la ROM stock cargada con mucho cuidado y quitar el conetor de la batería posterior mente el de la huella digital , el conector de la huella digital tiene dos pines pequeños visibles , en esos pines con mucho cuidado tiene que hacer un puente , al hacer el puente si quitarlo meten el cable USB ya conectado a la PC y verán que parpadeo en administrador de dispositivo ahí refrescan en miflash y cargan la ROM stock y listo esperar a que acabe y montar todo el teléfono esperar a que cargue .
Click to expand...
Click to collapse
daitalos said:
before than all disable Driver Signature !
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Download xiaomi USB drives : https://www.teamandroid.com/2018/08/05/xiaomi-mi-a2-usb-drivers-download/
Download Qualcomm HS-USB QDLoader 9008 : https://gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows/
[*Maybe you need : https://forum.xda-developers.com/showthread.php?t=2588979 ]
After installing all drivers reboot pc !
Unlock bootloader : > fastboot oem unlock / Unlock CRITICAL > fastboot flashing unlock_critical
Boot from fastboot to edl Mode : > fastboot oem edl
(maybe you can & with this : https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292 )
Now download xiaomi mifash tool & use it : http://en.miui.com/download-354.html > flashing guide > Fastboot method etc....
Read & here : https://forum.xda-developers.com/mi-a2/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824849
(and here some rom builds mia2) : https://www.theandroidsoul.com/xiaomi-mi-a2-update/
sry for english
Click to expand...
Click to collapse
I did everything All, buy After domenica try with success my phone doesn't boot, and at this time it's totally dead. Even test points don't work
Inviato dal mio Redmi 3 utilizzando Tapatalk
michiamoantonio said:
I did everything All, buy After domenica try with success my phone doesn't boot, and at this time it's totally dead. Even test points don't work
Inviato dal mio Redmi 3 utilizzando Tapatalk
Click to expand...
Click to collapse
I can not know exactly what you did on the device
maybe this tool help you (?) for enter EDL mode etc ...
https://forum.xda-developers.com/mi-a2/development/tool-mi-a2-xtrem-toolkit-t3879660
daitalos said:
I can not know exactly what you did on the device
maybe this tool help you (?) for enter EDL mode etc ...
https://forum.xda-developers.com/mi-a2/development/tool-mi-a2-xtrem-toolkit-t3879660
Click to expand...
Click to collapse
Device Is not recognized by PC
Inviato dal mio Redmi 3 utilizzando Tapatalk
i tried to flash a redmi 6 pro image on my a2 lite in edl mode, flashing works fine, but the screen remains black and won't be regognized from my computer :/
i disassembeled the phone and now the phone is regognized through edl testpoint, but when i try to flash a a2 lite image, i allways get the error: can not read from com port
please any idea how to flash my phone?
you can flash it using the programmers file http://www.mediafire.com/file/mxugl93nf4675k9/prog_emmc_firehose_Sdm660_ddr.elf/file I don't know if that one's for your chipset.
That's the only way around "can not read from port com".
I flashed wayne rom, it boots but displays press any key to shutdown and fastboot is messed up, won't connect to pc.
When I flash proper whyred roms for redmi note 5, phone never boots.
guys, my phone is still dead, if i connect to the pc and short test points, nothing happen... what can i do? any ideas?
same problem
michiamoantonio said:
guys, my phone is still dead, if i connect to the pc and short test points, nothing happen... what can i do? any ideas?
Click to expand...
Click to collapse
i have the exact same problem here. ive also tryed test point but nothing happens
im heisenberg said:
i have the exact same problem here. ive also tryed test point but nothing happens
Click to expand...
Click to collapse
Same problem. Test points doesn't work. TWRP works, but OTG or PC connection is not available . Has anyone found a solution?
I had the same problem seeing the "cannot receive packet" and phone completely dead just the qualcom device showing in MiFlash. How i fixed it i kept pressing the power button while pressing all the time flash button on mi flash until i received a message "resource in use" or something like that and the next moment i released the power button and pressed flash and it did flash the 10.0.2.0 full rom. My phone was bootloader unlocked. I tried everything else didnt work and i was hard to know what mode i am as the phone was completely bricked no vibrations or anything else.
Hi,
today I received my Mi A2. I unlocked developer options and enabled OEM unlock.
Then I rebooted to fastboot via power + vol down and executed
fastboot flashing unlock_critical
as fastboot oem unlock didn't work (command unknown).
I got the bootloader unlock screen and commited by "unlock bootloader" + power button.
Until then the phone booted up. However I wasn't able to boot TWRP-3.2.3-jasmine-20180804.img or a magisk patched_boot.img, both attempts just hung without progress.
Now I'm stuck at the android one logo and nothing happens or at fastboot logo with no device detected.
I suspect it's bad RAM.
anyone else?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
meltbanana said:
Hi,
today I received my Mi A2. I unlocked developer options and enabled OEM unlock.
Then I rebooted to fastboot via power + vol down and executed
fastboot flashing unlock_critical
as fastboot oem unlock didn't work (command unknown).
I got the bootloader unlock screen and commited by "unlock bootloader" + power button.
Until then the phone booted up. However I wasn't able to boot TWRP-3.2.3-jasmine-20180804.img or a magisk patched_boot.img, both attempts just hung without progress.
Now I'm stuck at the android one logo and nothing happens or at fastboot logo with no device detected.
I suspect it's bad RAM.
anyone else?
Click to expand...
Click to collapse
try with this
http://en.miui.com/download-353.html
https://rmtxpg.db.files.1drv.com/y4...ubZwX8fw6A?width=463&height=739&cropmode=none
tzadkiel2 said:
try with this
http://en.miui.com/download-353.html
https://rmtxpg.db.files.1drv.com/y4...ubZwX8fw6A?width=463&height=739&cropmode=none
Click to expand...
Click to collapse
fastboot doesn't work, it's stuck at "waiting for device" and fastboot devices shows a blank space, though I see the mi bot logo.
I'll return it.
for me every single attempt to flash a file failed though it showed the unlocked logo for the few times it booted.
it even showed random behaviour (fastboot returned unknown command, etc.), took several times for fastboot reboot or did nothing, it's defective.
meltbanana said:
fastboot doesn't work, it's stuck at "waiting for device" and fastboot devices shows a blank space, I'll return it.
for me every attempt to flash a file failed though it showed the unlocked logo for the few times it booted.
Click to expand...
Click to collapse
Change port USB, remove driver's and begin cero.
Si entiendes algo de expañol, elimina los drivers del pc y comienza como si estuvieras comenzando desde cero, cambia de puerto USB y conecta con el teléfono en fastboot se debería de instalar el driver.
Prueba también a Agregar hardware heredado, y ya sea por puertos COM o por otros lados Android Bootloader Interface.
Como yo lo desbloqueé fue con fastboot oem unlock.
Le he dejado en peores condiciones en varias ocasiones no he visto manera de pasar al Sistema después de instalar TWRP, así que me ha tocado recuperarlo en bastantes ocasiones.
tzadkiel2 said:
Change port USB, remove driver's and begin cero.
Si entiendes algo de expañol, elimina los drivers del pc y comienza como si estuvieras comenzando desde cero, cambia de puerto USB y conecta con el teléfono en fastboot se debería de instalar el driver.
Prueba también a Agregar hardware heredado, y ya sea por puertos COM o por otros lados Android Bootloader Interface.
Como yo lo desbloqueé fue con fastboot oem unlock.
Le he dejado en peores condiciones en varias ocasiones no he visto manera de pasar al Sistema después de instalar TWRP, así que me ha tocado recuperarlo en bastantes ocasiones.
Click to expand...
Click to collapse
cannot even reach it under ubuntu via fastboot
it's impossible that I broke it cause I wasn't able to flash a kernel (boot.img) or something else
and I wasn't able to switch a slot: "this device doesn't support slots". when I entered fastboot set_active a it returned
this device only support slots
a
b
it acted as if it was infected with an ART rootkit or had bad memory.
meltbanana said:
cannot even reach it under ubuntu via fastboot
it's impossible that I broke it cause I wasn't able to flash a kernel (boot.img) or something else
and I wasn't able to switch a slot: "this device doesn't support slots". when I entered fastboot set_active a it returned
this device only support slots
a
b
it acted as if it was infected with an ART rootkit or had bad memory.
Click to expand...
Click to collapse
In my case I was trying to flash MIUI 10 the third time then it fails I was using Android One rom September update and it was working flawlessly without any problem.
After miflash tool fails to flash my phone wont be detected either of my PC and Mac
I am thinking using deep flash cable to enter EDL but is it possible for MI A2 hopefully it is because I don't want my phone to be opened, ITS NEW :crying:
Am I still covered by warranty? If not I have to send my phone to repair shop to just enter EDL mode and to be able to flash stock or miui again
About me flashing MIUI I did follow instructions to avoid Anti Rollback (Never flashed MIUI 10 via twrp instead I flash custom roms)
johnsci911 said:
In my case I was trying to flash MIUI 10 the third time then it fails I was using Android One rom September update and it was working flawlessly without any problem.
After miflash tool fails to flash my phone wont be detected either of my PC and Mac
I am thinking using deep flash cable to enter EDL but is it possible for MI A2 hopefully it is because I don't want my phone to be opened, ITS NEW :crying:
Am I still covered by warranty? If not I have to send my phone to repair shop to just enter EDL mode and to be able to flash stock or miui again
About me flashing MIUI I did follow instructions to avoid Anti Rollback (Never flashed MIUI 10 via twrp instead I flash custom roms)
Click to expand...
Click to collapse
Same thing happened with me no fastboot no edl .
Then I flashed my phone using test points method.
And yes you need to open your phone for that.
ARNOB XENON said:
Same thing happened with me no fastboot no edl .
Then I flashed my phone using test points method.
And yes you need to open your phone for that.
Click to expand...
Click to collapse
Then I guess I need to open mine too
Is it guaranteed that the phone will work again?
Have you tried it yourself?
johnsci911 said:
Then I guess I need to open mine too
Is it guaranteed that the phone will work again?
Have you tried it yourself?
Click to expand...
Click to collapse
Yes It will work 100%....Best of luck ..Open it very carefully..Must watch some videos in YouTube how to open Mi A2.
Does it work with deep-cable? Or another option before open it? I prefer return to Amazon than open...
Fix it?
meltbanana said:
Hi,
today I received my Mi A2. I unlocked developer options and enabled OEM unlock.
Then I rebooted to fastboot via power + vol down and executed
fastboot flashing unlock_critical
as fastboot oem unlock didn't work (command unknown).
I got the bootloader unlock screen and commited by "unlock bootloader" + power button.
Until then the phone booted up. However I wasn't able to boot TWRP-3.2.3-jasmine-20180804.img or a magisk patched_boot.img, both attempts just hung without progress.
Now I'm stuck at the android one logo and nothing happens or at fastboot logo with no device detected.
I suspect it's bad RAM.
anyone else?
Click to expand...
Click to collapse
Did you fix ir?
I hace the same issue but Idk how to fix it, Any help?:c
---------- Post added at 03:16 PM ---------- Previous post was at 03:13 PM ----------
tzadkiel2 said:
Change port USB, remove driver's and begin cero.
Si entiendes algo de expañol, elimina los drivers del pc y comienza como si estuvieras comenzando desde cero, cambia de puerto USB y conecta con el teléfono en fastboot se debería de instalar el driver.
Prueba también a Agregar hardware heredado, y ya sea por puertos COM o por otros lados Android Bootloader Interface.
Como yo lo desbloqueé fue con fastboot oem unlock.
Le he dejado en peores condiciones en varias ocasiones no he visto manera de pasar al Sistema después de instalar TWRP, así que me ha tocado recuperarlo en bastantes ocasiones.
Click to expand...
Click to collapse
Yo intenté todo eso, el problema es que ningún PC reconoce el Xiaomi mi A2 aún cuando está en modo fastboot, lo único que sale es esperando dispositivo, no más no lo reconoce.
Did anyone solved this problem?
I've bricked my device and I can get on fastboot mode but the PC won't recognize the device.
I've tried several computers and systems, windows, ubuntu, debian...
Did the deep flash USB cable work?
I have a Moto E4 Plus xt1773, and it's in the infinite loop,
I try to enter into recovery mode and it does not enter,
Bootloader is locked, and the OEM also
I can only get into fastboot mode, can anyone help me?
sorry for the engfish of google
I gave flash in the Wood ROM of the Moto e4 and I just hear the sound of the motorola logo, but the screen turns black, but to hear that it starts,
but when I put my official ROM, it stays in Infinite Loop
Xt1773
My Cell's Rom is Nicklaus, and I tested a WOOD,
Instala la romstock de nicklaus
danyfenton said:
I have a Moto E4 Plus xt1773, and it's in the infinite loop,
I try to enter into recovery mode and it does not enter,
Bootloader is locked, and the OEM also
I can only get into fastboot mode, can anyone help me?
sorry for the engfish of google
Click to expand...
Click to collapse
Buenas noches amigo, instala la rom stock de este dispositivo, lo debes hacer con flastool es muy sencillo.
Saludos.
Hi,
I'm trying flash my mi a2 in miflash but cant, still error flash right at the beginning in Bluetooth. Anyone can help?
In fast boot doesn't appear the bunny, only black. But I can flash if boot in edl, only in fastboot this error happen.
Sorry my English
do you have an error in fastboot mode: "press any key to shutdown"? I have same problem
rmbplacido said:
Hi,
I'm trying flash my mi a2 in miflash but cant, still error flash right at the beginning in Bluetooth. Anyone can help?
In fast boot doesn't appear the bunny, only black. But I can flash if boot in edl, only in fastboot this error happen.
Sorry my English
Click to expand...
Click to collapse
*you probably need to unlock flashing critical, there is a tool on the forum to do that, is a fastboot command.
*probablemente necesitas desbloquear el flashing critical (algo así), usa la herramienta del foro para hacerlo, es un comando de fastboot
I have the critical unlock and I can flash in edl mode, only on the fasboot give a error in flash, the error begin in moment I flash and say Bluetooth can't flash
<Moderator Edit>: English language added to the top.
I have a problem with my note 9 and I have the bootloader blocked
tengo un problema con mi noe 9 y tengo el bootloader bloqueado
tjosue444 said:
<Moderator Edit>: English language added to the top.
I have a problem with my note 9 and I have the bootloader blocked
tengo un problema con mi noe 9 y tengo el bootloader bloqueado
Click to expand...
Click to collapse
poweroff your device. then press and hold volume down button(sometimes you have to try different combinations of power vol down and vol up) and connect the usb cable (already connected to pc) to your phone. It will probably boot into preloader for sometime and you will need to bypass the edl auth after it to enter edl. Here is the guide to do it
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com