LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is an unofficial LineageOS 16.0 build for the international Galaxy S4 LTE-A (GT-I9506).
The korean Galaxy S4 LTE-A (SHV-E330S/K/L) is NOT tested by the developer.
Known Issues
None
Instructions
Flash TWRP recovery via Odin.
Boot to TWRP recovery (Vol UP + Home + Power).
Optional: Wipe data / Factory Reset
Install the ROM (Lineage zip).
Optional: Install Magisk to get root.
Install the Google Apps (Open GApps 9.0).
Enjoy!
Downloads
All: https://www.androidfilehost.com/?w=files&flid=43918
LineageOS 16.0: lineage-16.0-20191212-UNOFFICIAL-ks01ltexx.zip
TWRP: twrp-3.3.1-1-ks01ltexx.tar
Recommended Bootloader/Modem: I9506XXSDPL2_I9506XXUDOJ2_bootmodem.tar
Sources
https://github.com/kyasu/android_kernel_samsung_msm8974
https://github.com/kyasu/android_device_samsung_ks01ltexx
https://github.com/kyasu/android_vendor_samsung_ks01ltexx
XDA:DevDB Information
[ROM][GT-I9506][ks01ltexx] LineageOS 16.0 UNOFFICIAL for the Galaxy S4 LTE-A, ROM for the Samsung Galaxy S4
Contributors
kyasu, LineageOS Devs
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2018-09-30
Last Updated 2019-12-12
Reserved
thank you
Looking forward to progress this will be taking and thank you for keeping this phone alive.
Thanks you very must
Thank u very much the best?
Feedback
Hi Kyasu, happy to report that its working fine even with a dirty flash from AEX ROM. It all looks very good considering its an early build. My phone is a Korean SHV E330s running DPH1 baseband firmware.
Camera that came bundled with Los doesn't seem to work, I use a Nokia camera port which works fine.
I will hold off on feature issues cause I don't know how many are LOS issues. A key observation was that ambient display was not working on receiving new notifications (screen not waking up).
Feedback
Hey , thanks for your great work !!!! The rom are great but where is the pie's navbar :v .... And when will the new update come out ??
Sorry for my bad english :v !!! GREAT THANKS FROM VIETNAM
:good::good::good:
kyasu said:
This is an unofficial LineageOS 16.0 build for the international Galaxy S4 LTE-A (GT-I9506).
The korean Galaxy S4 LTE-A (SHV-E330S/K/L) is NOT tested by the developer.
Known Issues
SELinux is permissive.
NFC
...
Click to expand...
Click to collapse
@kyasu, how can we best help? do you wish for a list of non-working features? logcats on crashes or feature failures? or both? or is it even too early for those.
NamLesnar said:
Hey , thanks for your great work !!!! The rom are great but where is the pie's navbar :v .... And when will the new update come out ??
Sorry for my bad english :v !!! GREAT THANKS FROM VIETNAM
:good::good::good:
Click to expand...
Click to collapse
Please don't ask for ETAs on new updates. It is seen as disrespectful throughout the community. Please be patient and wait or find another ROM to use.
Thanks!
Weapon X said:
Please don't ask for ETAs on new updates. It is seen as disrespectful throughout the community. Please be patient and wait or find another ROM to use.
Thanks!
Click to expand...
Click to collapse
Okay so sorry about that i didn't know it anyway thanks . I'm gonna wait for the stable version
Works fine!(SHV-E330L)
I hope you are fixing style option well.
zames94 said:
Works fine!(SHV-E330L)
I hope you are fixing style option well.
Click to expand...
Click to collapse
Any good rom for SHV - E330L ?
Well, do you need function to make call or send message ?
You want to use these function... you can find lineageOS 14.1 kor (idk who made this)
Or not, i recommend kyasu's lineageOS 15.1
And Darkness's custom rom series (Oreo)
Those are p stable so u can using safely..
Anyway, Have a good day!
Hey all!
Holds on to download LineageOS16.0. Now I wonder why there is such a huge slow connection to the download mirrors? It will take you all day to download this.
Is very annoying
Try with another mirror. I selecto wasington mirror and download fast
Denstore said:
Hey all!
Holds on to download LineageOS16.0. Now I wonder why there is such a huge slow connection to the download mirrors? It will take you all day to download this.
Is very annoying
Click to expand...
Click to collapse
Enviado desde mi GT-I9506 mediante Tapatalk
jegogo99 said:
Try with another mirror. I selecto wasington mirror and download fast
Enviado desde mi GT-I9506 mediante Tapatalk
Click to expand...
Click to collapse
The sad thing about that answer is that I have already tried all the 4 mirrors that were offered to me at the moment. and none of the mirrors had higher downloads than 145kb / sec
Denstore said:
The sad thing about that answer is that I have already tried all the 4 mirrors that were offered to me at the moment. and none of the mirrors had higher downloads than 145kb / sec
Click to expand...
Click to collapse
It worked fine for me, however I had similar problems in the past with afh. Usually restarting the download fixed it tho.
This is my daily driver right now. Will keep an eye on battery use, but seems OK so far, phone going into deep sleep no issues.
SHV E330S users, when the ROM boots you will see no simcard error, wait for a seconds till ROM fully boots and the network will appear.
Thanks kyasu
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is an unofficial CyanogenMod 13.0 build for the Galaxy S4 LTE-A (GT-I9506).
Instructions
Make sure that your GT-I9506 has the Lollipop bootloader and modem (The last installed stock ROM must be 5.0.1).
Flash TWRP recovery via Odin.
Boot to TWRP recovery (Vol UP + Home + Power).
Optional: Do nandroid backup
Wipe data / Factory Reset
Install the ROM (CM zip).
Install the Google Apps.
Enjoy!
Known Issues
Everything seems to work fine.
None
Downloads
All: https://www.androidfilehost.com/?w=files&flid=43918
LineageOS 13.0: lineage-13.0-20170122-UNOFFICIAL-ks01ltexx.zip
CyanogenMod 13.0: cm-13.0-20161223-UNOFFICIAL-ks01ltexx.zip
TWRP: official or twrp-3.0.3-0-ks01ltexx.tar
Downloads (by gebaya)
gebaya also provides his builds from my (device-specific) source code.
https://www.mediafire.com/folder/8l264568av165/
Sources
https://github.com/kyasu/android_kernel_samsung_msm8974
https://github.com/kyasu/android_device_samsung_ks01ltexx
https://github.com/kyasu/android_vendor_samsung_ks01ltexx
XDA:DevDB Information
[ROM][GT-I9506][ks01lte] CyanogenMod 13.0 UNOFFICIAL for the Galaxy S4 LTE-A, ROM for the Samsung Galaxy S 4
Contributors
kyasu
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod/LineageOS
Version Information
Status: Stable
Current Stable Version: 2017-01-22
Stable Release Date: 2017-01-22
Created 2015-12-05
Last Updated 2017-01-22
Reserved
WOW! youre the first of CM13 Rom for ks01lte, thank you! :fingers-crossed:
delete
deleted
What a fantastic job of ripping off other hlte/ks01lte contributor's work.
Kudos to you man!
delete
arter97 said:
What a fantastic job of ripping off other hlte/ks01lte contributor's work.
Kudos to you man!
Click to expand...
Click to collapse
I'm working on the Galaxy Alpha (S801) which is my current main device.
http://forum.xda-developers.com/gal...m-cyanogenmod-12-1-unofficial-galaxy-t3230946
I also have the Galaxy S4 LTE-A as my second or third device.
S4 LTE-A is very similar to Alpha (S801), so I tried to port CM13.0.
arter97 said:
What a fantastic job of ripping off other hlte/ks01lte contributor's work.
Kudos to you man!
Click to expand...
Click to collapse
What do you mean? The cm 13 in the OP its not his work? [emoji35]
Thanks for the cm13 rom! And if some others are not agree with you they can publish their own works.... So I will test your rom
Envoyé depuis Tapatalk
For me LTE and mms don't work. Can only work with weak 3G. Anybody got the same?
kyasu said:
I'm working on the Galaxy Alpha (S801) which is my current main device.
http://forum.xda-developers.com/gal...m-cyanogenmod-12-1-unofficial-galaxy-t3230946
I also have the Galaxy S4 LTE-A as my second or third device.
S4 LTE-A is very similar to Alpha (S801), so I tried to port CM13.0.
Click to expand...
Click to collapse
So you're telling me, out of NOWHERE the source code filled with 100+ files were uploaded 20+ days ago with no history of where it came from? Not to mention, the commits seem awfully too similar to the works of others through gerrit. It's disappointing to see things like this being posted on XDA and you still have the cheek to put source code which is not well documented. Bravo
10/10 would Kang again.
Please forum members. Don't do this. Give proper credits and proper documentation. This is an open source community and we expect proper documentation
Furrydaus said:
So you're telling me, out of NOWHERE the source code filled with 100+ files were uploaded 20+ days ago with no history of where it came from? Not to mention, the commits seem awfully too similar to the works of others through gerrit. It's disappointing to see things like this being posted on XDA and you still have the cheek to put source code which is not well documented. Bravo
10/10 would Kang again.
Please forum members. Don't do this. Give proper credits and proper documentation. This is an open source community and we expect proper documentation
Click to expand...
Click to collapse
My GT-9506 porting work is derived from Samsung stock kernel source code and the official CM source tree of ks01lte/hlte/klte and my sltecan work. Unfortunately, the official ks01lte is not so stable for me. So, I tried to port by myself.
https://wiki.cyanogenmod.org/w/Doc:_porting_intro
Many devices are architecturally similar to other devices that are already on the market and have existing CM ports. When a new device comes out, see if you can find out if it may be identical to another device, only with a different sized screen or more memory or some other minor difference. If you find an "ancestor" or "sibling" of your device, much of the work may already be done for you!
Click to expand...
Click to collapse
I credited to CyanogenMod team implicitly. I don't understand what is the problem?
Edited:
For initial bringing up of the Galaxy Alpha (sltecan), I investigated the existing CM ports (klte/ks01lte/hlte) and I found the Samsung Snapdragon 800/801 devices are sibling.
Because I have an experience of the bringing up of the Galaxy Alpha (sltecan), the porting of ks01lte based on the existing CM works is not hard. My ks01lte porting is mainly based on hlte with the latest Samsung Lollipop kernel and blobs. For using the Lollipop blobs, klte and ks01lte are good reference.
I deeply acknowledge and thank the existing CM works (klte/ks01lte/hlte).
Ok.
My ks01lte CM12.1 port utilized Samsung Lollipop kernel and blobs. This is different from other ports. I enjoyed it without publishing.
After I ported My Alpha (sltecan) from CM12.1 to CM13.0, I also ported My ks01lte from CM12.1 to CM13.0 in the exactly same way.
I think the ks01lte CM13.0 is useful for others, I decided to publish it.
rockman.kowal said:
For me LTE and mms don't work. Can only work with weak 3G. Anybody got the same?
Click to expand...
Click to collapse
LTE and mms works for me.
Please make sure that your GT-I9506 has the Lollipop bootloader and modem (The last installed stock ROM must be 5.0.1).
kyasu said:
Ok.
My ks01lte CM12.1 port utilized Samsung Lollipop kernel and blobs. This is different from other ports. I enjoyed it without publishing.
After I ported My Alpha (sltecan) from CM12.1 to CM13.0, I also ported My ks01lte from CM12.1 to CM13.0 in the exactly same way.
I think the ks01lte CM13.0 is useful for others, I decided to publish it.
Click to expand...
Click to collapse
cm13 is awesome, blazing fast. Few fc's but thanks for this experience. This rom has true added value for our obscolent device.
I wouldn't listen much to people saying you copied stuff. As far as i can see (and everyone else on this forum), this is the only cm13 rom available. So you basically it's impossible to rip something from another cm13 rom.
Let jealous people talk, you are doing a great job. Thanks for your effort.
@kyasu, thanks. Its working very well. Some mistakes in the spanish translation and some strings are still in english, but the rom its very smooth. Instaled without problem with nano open gapps. I am still testing...
No vibration when touching hardware keys(menu/back) for both of cm12.1 /cm13 in my e330. Anybody who has same phenomenon or only happened to me?
Edit: long press is vibration working but short press is not vibrated
Please provide more feedback about this ROM, how stable can it be as daily driver?
what is not working?
kornelius1982 said:
Please provide more feedback about this ROM, how stable can it be as daily driver?
what is not working?
Click to expand...
Click to collapse
This rom is already my daily driver.
At least, the following functions are tested and worked:
WiFi
3G
LTE
3G Calling
VoIP
WiFi Tethering
Bluetooth
Camera
Video Recording
Sound
Ok Google
Sensors
Compass
GPS
NFC
SD Card
USB OTG
For using MTP in M, every time you have to tap and select MTP.
And you have to install Google Apps for M. I'm using Open GApps (micro).
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
It can be used without any need to have any Google application installed.
CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
STATUS: ALPHA
This is a preview build, do not install it if you want a stable ROM.
This is a preview of what is going down on CM14.1
Rom is in beta state so many bugs are to be expected!
All the source code is available on my Github.
I do this on my free time and unfortunately I don't have much.
Any help is a appreciated!
LINKS IN SECOND POST
Source code: https://github.com/lirokoa
CREDITS:
The whole Cyanogenmod team
Special thanks @dhiru1602 for his awesome work on exynos 4
All people who works on the Exynos 4 SOC, they desserve it
XDA:DevDB Information
LineageOS N801X/N8000, ROM for the Samsung Galaxy Note 10.1
Contributors
lirokoa
Source Code: https://github.com/lirokoa
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Created 2016-11-22
Last Updated 2017-08-10
How to install:
Follow the usual procedure, important things is to use supported recovery, you can download it from the download section.
Also do not forget, wipe everything, install rom, then gapps without reboot between!
Others recovery will not be supported!
Also if you come from another ROM, full wipe is required.
FAQ:
Which Gapps to use? OpenGapps works great, you can get them from here
After installing ROM + Gapss, GApps keep crashing: Just update your recovery with the provided twrp (in cm-13.0 thread)
Keyboard does not work: enable hardware keyboard in settings.
If you don't want to see cursor while using S-Pen, you can disable it it in settings / inputs
Camera is not working: use google camera
SECURITY WARNING:
SElinux is set to permissive, I'm tired of rewriting those rules...
DOWNLOAD LINKS:
-10/08/2017:
-N801X: https://forum.xda-developers.com/devdb/project/dl/?id=26049
-N8000: https://forum.xda-developers.com/devdb/project/dl/?id=26052
Changelog:
- LineageOS update
Old releases :
-05/03/2017:
-N801X: https://forum.xda-developers.com/devdb/project/dl/?id=23476
-N8000: https://forum.xda-developers.com/devdb/project/dl/?id=23482
Changelog:
- LineageOS update
-16/01/2017:
-N801X: https://forum.xda-developers.com/devdb/project/dl/?id=22630
-N8000: https://forum.xda-developers.com/devdb/project/dl/?id=22631
Changelog:
- Welcome LineageOS
- Power off charging fixed
-09/12/2016:
-N801X: http://forum.xda-developers.com/devdb/project/dl/?id=21976
-N8000:http://forum.xda-developers.com/devdb/project/dl/?id=21998
Changelog:
- Android 7.1.1
- Fixed DRM
- Attempt to fix wifi tethering
-01/09/2016:
-N801X: http://forum.xda-developers.com/devdb/project/dl/?id=21696
-N8000:http://forum.xda-developers.com/devdb/project/dl/?id=21924
downloading now. Thanks lirokoa!!
*Edit - flashing crashes at checking md5 and reboots the recovery, Using TWRP 2.8.7
Any updates here guys?
Have a GT N8000 needing some care
Will try tonight thanks
lirokoa said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0, which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
Hi Lirokoa, do you still use github? i dont think there is updates for your cm14.1 work. cheers.
Great ROM
I installed the ROM yesterday. It has been very stable and fast. Thanks for extending the life of my tablet again.
This should work on a GT N8000 shouldn't it ?
I am downloading now
http://forum.xda-developers.com/showthread.php?t=1910913&page=2
Excellent Work
Fast, smooth, perfect...
Thanks
Dude you are awesome. Been rocking cm since buying my note new years ago. The one device that just will not die. Thank you for not forgetting her as so many older devices often get forgotten.
Just tried to Install on my GT N8000
It doesn't work it says its not for this model Bugger I was looking forward to Nougat on my N8000
Thanks anyway
Gaz
So for so good nice job
Would there be any way to get this ROM to install on a GT N8000 ??
little_lerroyy said:
Hi Lirokoa, do you still use github? i dont think there is updates for your cm14.1 work. cheers.
Click to expand...
Click to collapse
I'll clean up a bit and push in the next few days.
lirokoa said:
I'll clean up a bit and push in the next few days.
Click to expand...
Click to collapse
Oh awesome! BTW fantastic work you have done with the n801X. Much appreciated.
If you want to install on N8000:
Unzip updater-script (META-INF/com/google/android/) and remove first string. Replace it.
Gazzasore said:
Would there be any way to get this ROM to install on a GT N8000 ??
Click to expand...
Click to collapse
If you don't need radio capabilities, you can still install n8013 version. Try this: http://forum.xda-developers.com/showpost.php?p=64397238&postcount=76. Everything is working.
kodasnl said:
If you don't need radio capabilities, you can still install n8013 version. Try this: http://forum.xda-developers.com/showpost.php?p=64397238&postcount=76. Everything is working.
Click to expand...
Click to collapse
OK any idea what prgram they used to edit the ROM is this way
Cheers
Gazzasore said:
OK any idea what prgram they used to edit the ROM is this way
Cheers
Click to expand...
Click to collapse
Open Rom with 7Zip and edit with Notepad++.
LineageOS 14.1 is a free, community built, aftermarket firmware distribution of Android 7.1.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Hi all,
This is Unofficial build of LineAgeOS based on android 7.1.1 by me.
Steps to flash :
1. Download the latest build & GApps
2. Clean Flash the build & then GApps
3. If you want VoLTE then download the v2 patch by @Sudeep Duhoon and flash at the end
------------------------------------------------------------------------------------------------------------------
What's Working :
Boots
RIL (Calls, SMS, Data)
VoLTE
Fingerprint
Wi-Fi
Bluetooth
Camera
And other basic stuff
What's Not :
You Tell Me
Known Bugs :
LineageOS 14.1 is still in development. Some stuff will be missing or bugged. Flashlight is still buggy but it is not falut from my side
Find any bug ?
Please report and also give me logcat (if possible)
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Sources: https://github.com/LineageOS
Device specific sources: https://github.com/infinity06
Credits: For Development @Infinity and my helping friends @neonkat @rocknegi @TheDarkStrix @GreekDragon @AmolAmrit and many more
For VoLTE @Sudeep Duhoon
For device releated sources @TheStrix
Version Information:
Android OS Version: 7.1.1 (nougat)
Kernel Version: 3.10.x
Status: Unofficial
Created: 14/01/2017
Last Updated: 15/01/2017
What is the kernel used?
@Infinity
Reserved
some screenshots
reserve 2
last one
Goodix fingerprint supported?
Would be appreciated if u give details screenshots and features supported
Sent from my Redmi Note 3 using Tapatalk
have otas?
Camera and flash are buggy?
Thanks for your hardwork
Why another LOS 14.1??
Sent from my Redmi Note 3 using XDA Labs
What's the point of this ROM?
rmira said:
What is the kernel used?
@Infinity
Click to expand...
Click to collapse
I will upload my device tree , kernel and vendor on github. I will add this to OP but give me some time
leletoconnor said:
Goodix fingerprint supported?
Click to expand...
Click to collapse
Check and report.
I have fpc1020 fingerprint which works fine
0_RoXoR_0 said:
Would be appreciated if u give details screenshots and features supported
Click to expand...
Click to collapse
Features are same as cm14.1
And wait for screenshots i am adding it in OP
[email protected] said:
Camera and flash are buggy?
Thanks for your hardwork
Click to expand...
Click to collapse
Use camu app inbuilt app may crash sometime
Infinity said:
Check and report.
I have fpc1020 fingerprint which works fine
Click to expand...
Click to collapse
Is there still flashlight/camera bugs
tom jp said:
Is there still flashlight/camera bugs
Click to expand...
Click to collapse
For me camera is good but flashlight is still an issue
Blame Xiaomi for that
and any different with minz1 build?
Deleted
Nice work bro
Don't bother for the comments by people about why another build
Keep up the good work
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my LineageOS 16.0 for the Samsung Galaxy Note 10.1.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome and all the others who are working on the exynos 4 devices, you deserve it.
I'm working nearly every day to improve our N80xx devices and here you get a already stable version.
Here you can see what's working / not working:
Spoiler: Whats working
N8000, N8010, N8013, N8020:
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
USB
Video playback (HW/SW)
OTA Updates
RIL N8000, N8020
GPS, not sure if completely
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Spoiler: Whats not working
Main camera sometimes can't take a picture in full resolution, you could simply reopen the app and retry, or you lower the resolution.
Spoiler: Links
TWRP
N8000 Rom
N8010 / N8013 Rom
N8020 Rom
If you're having problems with decoding some videos (blurried),
this is mostly because the avc hardware decoder gets configured wrongly.
You can disable it with my magisk module:
avc_decoder_disabler.zip
If you are going to use Gapps,
I recommend to use the pico package!
https://opengapps.org/
For the others, you can use microG if you want, I've enabled signature spoofing.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: Changelog
29.10.2020
31.10.2020
03.11.2020
04.11.2020
09.11.2020
12.11.2020
18.11.2020
19.11.2020
20.11.2020
24.11.2020
26.11.2020
27.11.2020
07.12.2020
15.12.2020
22.01.2021
26.02.2021
02.03.2021
05.03.2021
18.03.2021
19.03.2021
21.03.2021
22.03.2021
07.04.2021
12.04.2021
13.04.2021
13.07.2021
10.08.2021
01.09.2021
02.09.2021
25.09.2021
28.09.2021
29.09.2021
30.09.2021
07.10.2021
12.12.2021
22.12.2021
09.01.2022 FINAL VERSION
15.02.2022
14.03.2022-FINAL-N8020
20.04.2022 Re-Implemented Boeffla Sound
Spoiler: Don't like my boot picture?
If you don't like it, reboot into recovery and type the following command:
adb shell (or use TWRP's terminal)
bash /data/param_restore.sh
reboot
Uploaded a prepared package to build your own boot picture
https://androidfilehost.com/?fid=7161016148664799666
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
Spoiler: How to install it?
Instructions
Wanna improve your sound configs?
Now you can use my app to access all boeffla sound configurations.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
XDA:DevDB Information
[ROM][9.x][N8000/N801x/N8020][STABLE] LineageOS 16.0, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.3.0
Based On: LineageOS
Version Information
Status: Stable
Release Date: 2020-12-15
Created 2020-10-26
Last Updated 2022-04-20
Tried your n8010 rom on my n8000. I don't use it with a sim card so it's okay. Running very good so far!
Dankeschön
So.. i have N8000.
You will have a ROM for this device or i have to install any of this?
Charly_Maths said:
So.. i have N8000.
You will have a ROM for this device or i have to install any of this?
Click to expand...
Click to collapse
You will receive a n8000 version the next days.
Komodoketavaran said:
Tried your n8010 rom on my n8000. I don't use it with a sim card so it's okay. Running very good so far!
Dankeschön
Click to expand...
Click to collapse
Thx for testing and your feedback .
html6405 said:
You will receive a n8000 version the next days.
Click to expand...
Click to collapse
Thank you.
You're awesome.
html6405 said:
Thx for testing and your feedback .
Click to expand...
Click to collapse
I know that I shouldn't ask that now but do you think even Android 10 will be able on this Tablet ?
Gesendet von meinem SM-P600 mit Tapatalk
html6405 said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my first test version for the n8010 / n8013 on LineageOS 16.0.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome and all the others who are working on the exynos 4 devices, you deserve it.
I'm working nearly every day to improve our N80xx devices and want to start with android 9 for now.
Dont be scared, all my android 7 roms will still receive security updates!
Here you can see how far everything is developed for now.
Whats working / not working:
Boots
Audio, main mic does not work for now
Bluetooth
Graphics
Cameras, main camera does not zoom and isnt able to take a picture for now.
Sensors, compass does not work for now.
RIL (SMS, mobile data, calls) - untested, should work on my n8000 build
Wifi
USB
Video playback (HW/SW)
OTA Updates
What is not working:
Wifi hotspot
consumerir transmitter
N8010, N8013:
TWRP 3.4.0 GT-N8010 for Odin
TWRP 3.4.0 GT-N8010 IMG
N8010 / N8013 Rom
If you are going to use Gapps,
I recommend to use the pico package!
https://opengapps.org/
For the others, you can use microG in the future if you want to (I will enable signature spoofing).
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
XDA:DevDB Information
[ROM][9.x][N8000/N801x/N8020][Testing] LineageOS 16.0, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP 3.3.0
Based On: LineageOS
Version Information
Status: Testing
Created 2020-10-26
Last Updated 2020-10-27
Click to expand...
Click to collapse
It is recommended for daily use, multimedia, use of spen in apps like sketchbook, we hope the prompt response and port of android 11 that we hope will help our tab to be valid for 5 years
---------- Post added 28th October 2020 at 12:07 AM ---------- Previous post was 27th October 2020 at 11:59 PM ----------
sebas1080 said:
It is recommended for daily use, multimedia, use of spen in apps like sketchbook, we hope the prompt response and port of android 11 that we hope will help our tab to be valid for 5 years
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s3/development/rom-lineageos-18-0-t4179303
It would be better if you carry the android 11 directly, which is for the s3 since it would be better than the android 9 and would support more apps and the tablet would last a little longer
Guys please chill , you just had android 7 two days ago.
If I manage to fix the last major problems, then there will be an android 10 build and maybe also android 11.
I cant say if the performance will be good enough, but with android 9 its pretty good.
(android 9 should be supportet a long time for all apps etc)
If there will be some donations in future, I will buy some new SSD's to store the Android 10 and 11 source and can start developing,
at the moment there is no place left (I contribute different LineageOS versions, Slim, RR, and I wont delete anything).
But more important at the moment is to reach a level for daily use with LOS16, afterwards we could think about other android 9 roms (if we want them, like for example RR, Slim, ...)
and then, I would release an android 10 build.
hi html6405, it's just crazy that you ported android 9 to our old tablet, sothanks for that big effort!
I'm using your slimroms port right now with android 7, do you recommend me to install the lineage os 16 yet, or do you think it is not still functional for everyday use?
Hello,
Thanks a lot for your good job.
I'll wait for the N8000 version .
It would revive my old tablet.
Regards.
Ezaechiel.
Artu1 said:
hi html6405, it's just crazy that you ported android 9 to our old tablet, sothanks for that big effort!
I'm using your slimroms port right now with android 7, do you recommend me to install the lineage os 16 yet, or do you think it is not still functional for everyday use?
Click to expand...
Click to collapse
This question is not easy to answere, we just have the testing phase.
But you could make a backup of your Slim7 installation and test it by your own.
Overall it's pretty stable and doesnt run bad so far.
I've already fixed many other things, you will receive an update, maybe today or tomorrow.
ezaechiel said:
Hello,
Thanks a lot for your good job.
I'll wait for the N8000 version .
It would revive my old tablet.
Regards.
Ezaechiel.
Click to expand...
Click to collapse
You can prepare yourself to flash it today or tomorrow .
html6405 said:
Guys please chill , you just had android 7 two days ago.
If I manage to fix the last major problems, then there will be an android 10 build and maybe also android 11.
I cant say if the performance will be good enough, but with android 9 its pretty good.
(android 9 should be supportet a long time for all apps etc)
If there will be some donations in future, I will buy some new SSD's to store the Android 10 and 11 source and can start developing,
at the moment there is no place left (I contribute different LineageOS versions, Slim, RR, and I wont delete anything).
But more important at the moment is to reach a level for daily use with LOS16, afterwards we could think about other android 9 roms (if we want them, like for example RR, Slim, ...)
and then, I would release an android 10 build.
Click to expand...
Click to collapse
You are awesome!!!!
Update 29.10.2020:
Built for N8000, N8010 and N8020:
fixed all sensors,
RIL not working (n8000, n8020),
fixed OTA for all.
html6405 said:
Guys please chill , you just had android 7 two days ago.
If I manage to fix the last major problems, then there will be an android 10 build and maybe also android 11.
I cant say if the performance will be good enough, but with android 9 its pretty good.
(android 9 should be supportet a long time for all apps etc)
If there will be some donations in future, I will buy some new SSD's to store the Android 10 and 11 source and can start developing,
at the moment there is no place left (I contribute different LineageOS versions, Slim, RR, and I wont delete anything).
But more important at the moment is to reach a level for daily use with LOS16, afterwards we could think about other android 9 roms (if we want them, like for example RR, Slim, ...)
and then, I would release an android 10 build.
Click to expand...
Click to collapse
You are awesome .
html6405 said:
Update 29.10.2020:
Built for N8000, N8010 and N8020:
fixed all sensors,
RIL not working (n8000, n8020),
fixed OTA for all.
Click to expand...
Click to collapse
OMG!!!
Mouse pointer is back!!!
JEjeje.
Everything working good so far.
Doubt
Hey, if i want to flash gapps, what do I select as arm architecture? (n8000).
like if I'm not wrong n8000 is arm7, not sure if its the same as arm in the opengapps page. can somebody pls correct me and attach the gapps link too.
Thanks!
Charly_Maths said:
OMG!!!
Mouse pointer is back!!!
JEjeje.
Everything working good so far.
Click to expand...
Click to collapse
I know , mouse pointer will be removed in the next update.
(It was already on my list, but the list is long...)
PHP:
dex450 said:
Hey, if i want to flash gapps, what do I select as arm architecture? (n8000).
like if I'm not wrong n8000 is arm7, not sure if its the same as arm in the opengapps page. can somebody pls correct me and attach the gapps link too.
Thanks!
Click to expand...
Click to collapse
https://opengapps.org/
ARM->9.0->pico
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my preview build version of LineageOS 18.1 for our Samsung Galaxy Note 10.1 devices.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome for all your work which helped me a lot to bring this up.
This is a early BETA build, so don't install it if you want a completley stable rom and don't report my already listet bugs!
I'm working nearly every day on our N80xx devices, because LOS18 runs much smoother than LOS17.1, I will continue here.
When you have BitGapps installed, you have to reflash them after every update!
Here you can see how far everything is working for now.
Spoiler: Whats working
N8000, N8010, N8013, N8020:
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Stylus with gestures and hovering icon
sec keyboard dock
RIL on N8000 (mobile connection)
much more...
Spoiler: Whats not working
Screen Cast, Chromecast did work, Samsung TV not
Main camera sometimes can't take a picture (reopen app or lower resolution)
Random reboots
N8020: RIL works 90%
Screen lightning bug, nearly eliminated
SD-Card can't be formatted as internal storage, this will cause a bootloop
Spoiler: Links
TWRP
N8000 / N8005 Rom
N8010 / N8013 Rom
N8020 Rom
Magisk zip file
Spoiler: Changelog
22.12.2020
23.12.2020
24.12.2020
11.01.2021
14.01.2021
11.03.2021
28.04.2021
29.04.2021
30.04.2021
01.07.2021
06.07.2021
15.07.2021
24.07.2021
18.08.2021
19.08.2021
23.09.2021
29.09.2021
07.10.2021
08.10.2021
26.10.2021
05.11.2021
08.11.2021
03.12.2021
14.12.2021
06.01.2022
07.01.2022
25.02.2022
15.04.2022
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
If you are going to use Gapps,
here you can download them:
Open Gapps
For the others, you can use microG in future.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs?
Now you can use my app to access all boeffla sound configurations.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][11.x][N8000/N801x/N8020][BETA] LineageOS 18.1, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.4.0
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.
Version Information
Status: Beta
Created 2020-12-21
Last Updated 2022-04-15
Wow. Thanks for this. I will test it out later but in the meantime, I don't see any Gapps for Lineage 18.1/Android 11 that is for ARM (only ARM64)...
xtoad said:
Wow. Thanks for this. I will test it out later but in the meantime, I don't see any Gapps for Lineage 18.1/Android 11 that is for ARM (only ARM64)...
Click to expand...
Click to collapse
OpenGApps - Browse /arm/test at SourceForge.net
OpenGApps daily releases
sourceforge.net
Wow, really? Thanks a lot!
Debvgger said:
Wow, really? Thanks a lot!
Click to expand...
Click to collapse
I will upload a new update today with better stability.
Update 22.12.2020:
Some Bugfixes, but still not stable.
Good Morning!
Are we going to have a rom for the N8000?
Alexfs said:
Good Morning!
Are we going to have a rom for the N8000?
Click to expand...
Click to collapse
Yes, I'm already having a version, but I'm still struggling with ril.
It crashes every 5 seconds, as soon as I have resolved this issue,
I will upload it.
I have been unable to get through setup without reboots or boot loops. (I had also the same problem with the last few Lineage 16 builds). I was ready to accept device failure (as it has all original parts from ~9 years ago). However, RR 7.1.2 is stable for me, as is the 10/28 build of L16)
It has occurred to me that was around the time you added some slight overclocking? Does this sound possible?
Again, Thank You for your quality work!
xtoad said:
I have been unable to get through setup without reboots or boot loops. (I had also the same problem with the last few Lineage 16 builds).
Click to expand...
Click to collapse
With lineageos 16? Really? This should be stable, no one reported such issues before.
This rom is early alpha, so it could be, but my devices are all booting and are still on switched since yesterday,
but there is still much work to do.
xtoad said:
It has occurred to me that was around the time you added some slight overclocking? Does this sound possible?
Click to expand...
Click to collapse
And yes, with 1600 MHz the device runs stable!
I tried full wipes and both alpha versions (and the Gapps you referenced), but I always get restarts and boot loops during setup. Incidentally, the same for the December versions of your newest Android 9.
I have the October 28 version of your Android 9 currently and it seems stable. Also your latest RR is stable for me. I will continue to try the new releases.
xtoad said:
Incidentally, the same for the December versions of your newest Android 9.
Click to expand...
Click to collapse
Strange, please could you do a last_kmsg and send it to me?
But, so far you are the only person, I will try a fresh installation.
And further problems of LOS16, please post them there .
I will upload a new Testversion today (LOS18.1).
html6405 said:
Strange, please could you do a last_kmsg and send it to me?
But, so far you are the only person, I will try a fresh installation.
And further problems of LOS16, please post them there .
I will upload a new Testversion today (LOS18.1).
Click to expand...
Click to collapse
I will continue to test. Possibly just my device. Years ago I tried playing with overclock settings and was never able to get anything stable.
html6405 said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my preview build version of LineageOS 18.1 for our Samsung Galaxy Note 10.1 devices.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome for all your work which helped me a lot to bring this up.
This is a preview build, so don't install it if you want a stable rom and don't report my already listet bugs!
I'm working nearly every day on our N80xx devices, because LOS18 runs much smoother than LOS17.1,
I will continue my work there.
Uncheck to overwrite recovery when you set it up, otherwise twrp will be gone and you have to reflash it!
When you have BitGapps installed, you have to reflash them after every update!
Here you can see how far everything is working for now.
Spoiler: Whats working
N8000, N8010, N8013, N8020:
Boots
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
USB
Video playback (HW/SW)
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Stylus with gestures and hovering icon
sec keyboard dock
Spoiler: Whats not working
Video recording with both cameras
GPS
LiveDisplay
Magisk Root
OTA Updates
Screen Cast
Random reboots
Maybe more
Links:
Spoiler: N8010, N8013
TWRP 3.4.0 GT-N8010 for Odin
TWRP 3.4.0 GT-N8010 IMG
N8010 / N8013 Rom
If you are going to use BitGapps,
here you can download them:
BiTGApps
Custom Google Apps Project
bitgapps.github.io
For the others, you can use microG in future.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][11.x][N8000/N801x/N8020][ALPHA] LineageOS 18.1, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.4.0
Based On: LineageOS
Version Information
Status: Alpha
Created 2020-12-21
Last Updated 2020-12-21
Click to expand...
Click to collapse
Thanks a lot.
are you also working for the rom for n8020?
fastjoy77 said:
are you also working for the rom for n8020?
Click to expand...
Click to collapse
Yes, but this will take some time.
Update 23.12.2020:
Build for N8000 and fixed RIL
Further ported palm rejection
Fixed some graphic crashes
Fixed some kernel crashes
Removed dangerous recovery flash option
More small things... It was a long day
I'm really struggling these day's with AFH, all servers are very slow.
As soon as I managed this, the links will be updated.
And dont forget, if you had BitGapps installed, you must flash them afterwards,
otherwise it wont boot.
Links are up!
html6405 said:
Links are up!
Click to expand...
Click to collapse
Thanks. You are Ironman.