Related
Hey guys, I’ve purchased a k20 pro 6/128 variant here in Trinidad and Tobago from Let’s Talk phone company which imports phones and sell it here in Trinidad and Tobago. No one else sells the device here in my country.
When I opened my phone and started using it, I saw that it was the fake global rom which was installed on it. So I came onto here to try to flash the china firmware on it, which I did. After flashing the firmware on it, i installed twrp and wiped everything, data + cache + Dalvik Cache + System, then I flashed the EU firmware on it. After successfully flashing it I flashed magisk and some modules on it, and the phone worked GREAT! Then one day while using it the phone just shut down just like that and never booted back up. It stayed on the boot screen and did nothing!
So I tried reflashing the Chinese firmware with miflash, but this time I Accidentally RELOCKED bootloader, but when I first purchased the phone, the bootloader was already UNLOCKED. Miflash successfully flashed the chinese firmware v10.3.8.0 and the phone booted. I was RELIEVED! But after using it for a while, the phone started freezing! And their was a problem with the front camera! Somehow my front camera won't open properly, it kept saying "Can't open front camera, please calibrate".
And when I press Calibrate, popup cam goes up and down 3 times in a row and says "Can't calibrate".
So I went and request to unlock the bootloader and waited 168 hours, and in that 168 hours I left the phone untouched because it kept crashing and never boot back up unless if I go into recovery and wipe data. So I left the phone untouched for a whole week! Yesterday the waiting period came to an end and FINALLY I unlocked the bootloader! When I opened back up miflash I ACCIDENTALLY LOCKED BOOTLOADER AGAIN!!!! :’( Now Mi unlock is saying that I need to wait 30 DAYS TO UNLOCK BOOTLOADER BEFORE I CAN TRY TO FIX MY PHONE AGAIN! Please help me. Is there any way to flash the firmware on a locked bootloader? i dont care which firmware it is, once my phone is working again.
Any assistance would be very much appreciated!
Only solution is to enter to edl mode by test point but its too risky or to get a mi account with edl authorization, wait till the end of 30 days and dont make the same error for 3 time.
bouyhy01 said:
Only solution is to enter to edl mode by test point but its too risky or to get a mi account with edl authorization, wait till the end of 30 days and dont make the same error for 3 time.
Click to expand...
Click to collapse
I forgot to mention, after using miflash the last time, i flashed the indian global firmware on it using Miflash. The phone wont boot up past the recovery mode. It says "This MIUI version can't be installed on this device" in red. Tried wiping data but same results.
You have to unlock the bootloader and it will work again
ashok9949 said:
You have to unlock the bootloader and it will work again
Click to expand...
Click to collapse
guess i'll have to wait a whole month then before i can use the phone. Thanks anyway
1.Go to fastboot. try flash latest chineese fastbootrom.
doesnt work?
Then you only have choice for EDL mode flash.
But edl mode requires authentification anyway which in most case you do not own..
we need something solid edl flash method.. this is common&biggest xiaomi problem
carpediemz said:
1.Go to fastboot. try flash latest chineese fastbootrom.
doesnt work?
Then you only have choice for EDL mode flash.
But edl mode requires authentification anyway which in most case you do not own..
we need something solid edl flash method.. this is common&biggest xiaomi problem
Click to expand...
Click to collapse
Here are the list of things i've tried thus far:
1- Tried flashing china fastboot rom 10.3.8.0 with Miflash. No luck.
2- Tried unlocking bootloader with Mi unlock. Have to wait the 30 day period.
3- Tried unlocking bootloader with fastboot commands. Didn't work.
4- Tried flashing LR twrp and unofficial twrp, No luck as well.
I've sent an Email to [email protected] couple hours ago. Waiting to hear from them.
As for edl mode, i've no idea what it is or how to even start. If someone can guide me as to what to do, i'll try it. Appreciate all the feedback and help from y'all
abdulmaalik1tt said:
I forgot to mention, after using miflash the last time, i flashed the indian global firmware on it using Miflash. The phone wont boot up past the recovery mode. It says "This MIUI version can't be installed on this device" in red. Tried wiping data but same results.
Click to expand...
Click to collapse
I dont know how you can flash indian rom with locked bootloader.
Now there is only one method for you, open the back cover of the fone, do test point method, flash china fastboot firmware and unlock again.
demonntl said:
I dont know how you can flash indian rom with locked bootloader.
Now there is only one method for you, open the back cover of the fone, do test point method, flash china fastboot firmware and unlock again.
Click to expand...
Click to collapse
That might be an option for me; however, i dont know where is the test point after i open the back of the phone. Any idea?
abdulmaalik1tt said:
I forgot to mention, after using miflash the last time, i flashed the indian global firmware on it using Miflash. The phone wont boot up past the recovery mode. It says "This MIUI version can't be installed on this device" in red. Tried wiping data but same results.
Click to expand...
Click to collapse
EDL mode will not work untill you have a EDL Authorized account
I had already tried and it was a bad idea to open the back cover just stick with unlocking bootloader
EDL test point will not work because xaiomi made because no body should buy Chinese Varient phone and flash global rom ,and I don't understand exactly why xaiomi did this with EDL and bootloader
Opened up the back of my phone, found the edl mode test point, miflash recognizes the device and begins flashing then i get this error "cannot receive hello packet"
ashok9949 said:
EDL mode will not work untill you have a EDL Authorized account
I had already tried and it was a bad idea to open the back cover just stick with unlocking bootloader
EDL test point will not work because xaiomi made because no body should buy Chinese Varient phone and flash global rom ,and I don't understand exactly why xaiomi did this with EDL and bootloader
Click to expand...
Click to collapse
Wow. All this for nothing :crying:
abdulmaalik1tt said:
Opened up the back of my phone, found the edl mode test point, miflash recognizes the device and begins flashing then i get this error "cannot receive hello packet"
Click to expand...
Click to collapse
Ok, when I flash my mi5, it is the same. You only need to reboot the device into edl and try to flash again.
IXTUS said:
Ok, when I flash my mi5, it is the same. You only need to reboot the device into edl and try to flash again.
Click to expand...
Click to collapse
Now it's saying my account is not authorized. The stress is real :crying:
hi i have some similar for mistake i relock bootloader and just boot in fastboot and dont boot up recovery and i wait too 30 days but i search google and just download older mi flash and whooalaaa bootloader unlocked again not waiting time just try that work for me
abdulmaalik1tt said:
Now it's saying my account is not authorized. The stress is real :crying:
Click to expand...
Click to collapse
i said to you,i had faced the same issue,only unlocking the bootloader will help you
or you can try chinese mi pc suite,with english translator but you have to flash chinese recovery rom,
but im not sure it will work ,in my case it didnt work because it had base rom of indian varient
actually chinese and indian k20 pro are not the same
for example indian k20 pro dont have NFC
but chinese varient have nfc
abdulmaalik1tt said:
Now it's saying my account is not authorized. The stress is real :crying:
Click to expand...
Click to collapse
Did you complete the flash ？and start the phone into miui? If there have some picture, it is best.
---------- Post added at 10:03 AM ---------- Previous post was at 09:42 AM ----------
I have some ideas but I have not verified them. You can try to replace the recovery.img in china firmware for twrp and then fastboot flash on edl mode。if it can be done， dnot star it just into twrp and formatted data.
I will test this method on my old mi5 a little later.
To fix the front camera problem you'll have to flash the persist.img file of the 10.3.8 into the persist partition. It worked for me several times.
I accidentaly lock my bootloader, too, but I was able to unlock it right away
Don't worry mate, I had the same issue.
See this thread:
https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012
I got mine fixed, you just need someone with an authorised account to help you out.
You got this far! You are almost there! trust me.
Thanks guys. I messaged the guy. Let's see if this works
Hi guys!
May I know if anybody here experienced black screen ? Screen has no image to display. Backlight is working, Led light is working when charging, fingerprint vibrates as well when A2 is turned on. I have tried replacing LCD display but black screen persists. What do you think is the problem?
Sent from my Mi 9 SE using Tapatalk
I have the same problem!!!! I try flash rom again but it persists
Yesterday it happened to me also.
The phone is working, the touch is working, but the lcd is black.
I even managed to recieve a call. Tried to restart the phone but its still black screen with working touch.
I can't find any solution...
Anybody found a solution??
My MI A2 is in black screen after updated to Wayne V11.0.6.0.PDCCNXM 20200509.
Tried to flash again, the screen didn't even turned on anymore, then used an UNBRICK WAYNE XIAOMI MI6X and it's back to black screen, been like this for 4 days now, should I start looking for a new phone? :crying:
Serial number: 23e3c4ee
Codename: wayne
Bootloader: locked
Anti version: 4
ROM: Wayne V11.0.6.0.PDCCNXM 20200509.
When I flash the ROM again, takes 100, 200 seconds only, and didn't change anything.
RiFeee said:
Anybody found a solution??
My MI A2 is in black screen after updated to Wayne V11.0.6.0.PDCCNXM 20200509.
Tried to flash again, the screen didn't even turned on anymore, then used an UNBRICK WAYNE XIAOMI MI6X and it's back to black screen, been like this for 4 days now, should I start looking for a new phone? :crying:
Serial number: 23e3c4ee
Codename: wayne
Bootloader: locked
Anti version: 4
ROM: Wayne V11.0.6.0.PDCCNXM 20200509.
When I flash the ROM again, takes 100, 200 seconds only, and didn't change anything.
Click to expand...
Click to collapse
stop stressing . you have ARB4 so just flash a custom rom ...or flash only the LASTEST STOCK ROM ...you didn't listen and tried to flash another think ...so your phone went to hardbrick edl mode
your phone is fine it is just in a timeout edl mode
the only way to fully rescue it is by physically forcing testpoint then flashing LATEST FASTBOOT STOCK ...this time listen or stay on black screen
KevMetal said:
stop stressing . you have ARB4 so just flash a custom rom ...or flash only the LASTEST STOCK ROM ...you didn't listen and tried to flash another think ...so your phone went to hardbrick edl mode
your phone is fine it is just in a timeout edl mode
the only way to fully rescue it is by physically forcing testpoint then flashing LATEST FASTBOOT STOCK ...this time listen or stay on black screen
Click to expand...
Click to collapse
Already did it and gets worse, if I flash the latest fastboot Stock ROM really becomes a brick, to de point of not even the screen turns on and stay on edl mode forever.
RiFeee said:
Already did it and gets worse, if I flash the latest fastboot Stock ROM really becomes a brick, to de point of not even the screen turns on and stay on edl mode forever.
Click to expand...
Click to collapse
because you are trying to downgrade
what you need to do is flash the LATEST chinese fastboot stock rom of Wayne or it will never work
you need to flash it with edl and miflash ( LATEST BETA)
you keep on thinking you can flash any stock rom but you can't ......
if you try to flash any stock rom older than the last stock rom you flashed it will never boot and keep going back to edl blackscreen
if you DON'T open your phonr and short the test point miflash will timeout or give errors and device wont boot
open your phone with screwdriver and flash the VERY latest chinese fastboot rom with latest miflash beta
KevMetal said:
because you are trying to downgrade
Click to expand...
Click to collapse
Already tried to downgrade, upgrade, change the type of rom, original, custom, and nothing worked
RiFeee said:
Already tried to downgrade, upgrade, change the type of rom, original, custom, and nothing worked
Click to expand...
Click to collapse
that is your problem ...you think you can get out of this without paying the price ..you cant
do what I told you ...in the posts before
KevMetal said:
because you are trying to downgrade
what you need to do is flash the LATEST chinese fastboot stock rom of Wayne or it will never work
you need to flash it with edl and miflash ( LATEST BETA)
you keep on thinking you can flash any stock rom but you can't ......
if you try to flash any stock rom older than the last stock rom you flashed it will never boot and keep going back to edl blackscreen
if you DON'T open your phonr and short the test point miflash will timeout or give errors and device wont boot
open your phone with screwdriver and flash the VERY latest chinese fastboot rom with latest miflash beta
Click to expand...
Click to collapse
KevMetal said:
that is your problem ...you think you can get out of this without paying the price ..you cant
do what I told you ...in the posts before
Click to expand...
Click to collapse
What a heck are you talking about?
Already did everything with Mi flash, forced edl mode by point test, saw like 300 tutorials, for Mi A2, Mi 6x.
What I needed was a verified Mi account to unlock and flash with no problems
RiFeee said:
What a heck are you talking about?
Already did everything with Mi flash, forced edl mode by point test, saw like 300 tutorials, for Mi A2, Mi 6x.
What I needed was a verified Mi account to unlock and flash with no problems
Click to expand...
Click to collapse
well if you had followed any of mine or listened carefully to what I'm telling you , your device would have booted already ... but continue in the same manner since you think my help is gibberish .
you don't need an account to flash your device ...
KevMetal said:
well if you had followed any of mine or listened carefully to what I'm telling you , your device would have booted already ... but continue in the same manner since you think my help is gibberish .
you don't need an account to flash your device ...
Click to expand...
Click to collapse
I already did, tried all the tutorials from 2018 to last month. The phone bootloader is locked and for some reason I can't unlock it, tried a dozen of different approaches, recovery's, flashings, ADB and everything.
Always ends in two ways, black screen with back light on (some sounds work and keeps in the lock login screen) or dead stuck in permanent EDL mode.
My phone still not working. Maybe its because of the busted display IC.
Hi Guys, I hope someone of you could help me out.
Recently a Chinese friend of mine gave me an MI 9 as a present. But unfortunately they ROM of the new phone was the CN version.
I found a way to change the ROM by doing the unlock bootloader and flashing TRWP, after that, I downloaded the MI9_Global_V9.5.30_vendor_fw_flash, went back to the Recovery and wiped the "Delvik, cache, SYSTEM and Data. When I was trying to install the rom I got an error telling me the Global rom file was corrupt and restarted the cellphone.
The problem is I am stuck in the Fastboot loop, can't access the recovery and my computer don't recognize the cellphone.
I know I ****ed it up, I was wondering if I can revert that or did I just lost a phone.
Thank you Guys.
pedrohwelerson said:
Guys,
I just solve my problem, I used MI Unlock tool and unlock the bootloader and all is good again.
I would like to thank you all for your help.
Best Regards
Click to expand...
Click to collapse
Hi,
How did you unlock your bootloader?
It asks for binding Mi account and it's not possible when your phone is bricked.
Yeah, the rule is simple. If it boots into fastboot, it can be recovered. Just flash the global you want with the MI flash tool and the fastboot file.
nudou350 said:
Yeah, the rule is simple. If it boots into fastboot, it can be recovered. Just flash the global you want with the MI flash tool and the fastboot file.
Click to expand...
Click to collapse
I'll try it later my friend, I'll come back if I succeed.
Thank you
pedrohwelerson said:
I'll try it later my friend, I'll come back if I succeed.
Thank you
Click to expand...
Click to collapse
You use Mi flash 2018.5.28
and Flash rom dev Global 9.6.27
or rom Stable Global
https://forum.xda-developers.com/showpost.php?p=80319431&postcount=3
Guys I am too stupid for this,
I flashed the fastboot global rom in my phone with MI flash but locked it in the end (can't believe I am that retard), now I believed I have bricked it for good.
Now I can't flash the correct fastboot ROM with miflash because I have locked the bootloader while trying to flash the Global ROM. I am at the fastboot loop again.
Can I do something now or I just have a expensive paper holder?
Thank you guys.
pedrohwelerson said:
Guys I am too stupid for this,
I flashed the fastboot global rom in my phone with MI flash but locked it in the end (can't believe I am that retard), now I believed I have bricked it for good.
Now I can't flash the correct fastboot ROM with miflash because I have locked the bootloader while trying to flash the Global ROM. I am at the fastboot loop again.
Can I do something now or I just have a expensive paper holder?
Thank you guys.
Click to expand...
Click to collapse
flash another official firmware on a locked bootloader BY XIAOMI TOOL V2 https://www.xiaomitool.com/v2
https://www.youtube.com/watch?v=UMkDAxiDdKs&t=10s
Here’s something VERY important before you flash or update the ROM.
1. Xiaomi Phones manufactured for Chinese market are not able to run MIUI Global ROM.
2. Xiaomi Phones manufactured for Global markets are not able to run MIUI China ROM.
We highly recommend you to buy Xiaomi Phones via official or authorized sales channels and double check the system information before flashing or updating.
hochocnua said:
flash another official firmware on a locked bootloader BY XIAOMI TOOL V2 https://www.xiaomitool.com/v2
https://www.youtube.com/watch?v=UMkDAxiDdKs&t=10s
Here’s something VERY important before you flash or update the ROM.
1. Xiaomi Phones manufactured for Chinese market are not able to run MIUI Global ROM.
2. Xiaomi Phones manufactured for Global markets are not able to run MIUI China ROM.
We highly recommend you to buy Xiaomi Phones via official or authorized sales channels and double check the system information before flashing or updating.
Click to expand...
Click to collapse
I think the problem is that he locked the bootloader after install the global ROM.
There are several user that flash global ROM in Xiaomi chinese market phones.
SDS
pedrohwelerson said:
Guys I am too stupid for this,
I flashed the fastboot global rom in my phone with MI flash but locked it in the end (can't believe I am that retard), now I believed I have bricked it for good.
Now I can't flash the correct fastboot ROM with miflash because I have locked the bootloader while trying to flash the Global ROM. I am at the fastboot loop again.
Can I do something now or I just have a expensive paper holder?
Thank you guys.
Click to expand...
Click to collapse
Hi guy,
Same thing happened to me, I felt very stupid, but it was on a MI 8 SE.
According to my experience, only there's a way to solve it and it's booting on EDL mode.
You'll need an authorized Mi account to flash the original ROM.
There's a complete guide on c . mi . com named [Guide] [All in One] MIUI Flashing Guide: Unbrick, EDL Method / Locked Bootloader, Unlock Bootloader, More, I can't post the url because I'm a new user
Best wishes!
Regards from Peru.
Jhnn11 said:
Hi guy,
Same thing happened to me, I felt very stupid, but it was on a MI 8 SE.
According to my experience, only there's a way to solve it and it's booting on EDL mode.
You'll need an authorized Mi account to flash the original ROM.
There's a complete guide on c . mi . com named [Guide] [All in One] MIUI Flashing Guide: Unbrick, EDL Method / Locked Bootloader, Unlock Bootloader, More, I can't post the url because I'm a new user
Best wishes!
Regards from Peru.
Click to expand...
Click to collapse
How were you able to get the authorized MI account? In the tutorial you mentioned, they didn't say anything about MI Account.
I'll try MItool first and let you guys know.
Thank you for the tip
hochocnua said:
flash another official firmware on a locked bootloader BY XIAOMI TOOL V2 https://www.xiaomitool.com/v2
https://www.youtube.com/watch?v=UMkDAxiDdKs&t=10s
Here’s something VERY important before you flash or update the ROM.
1. Xiaomi Phones manufactured for Chinese market are not able to run MIUI Global ROM.
2. Xiaomi Phones manufactured for Global markets are not able to run MIUI China ROM.
We highly recommend you to buy Xiaomi Phones via official or authorized sales channels and double-check the system information before flashing or updating.
Click to expand...
Click to collapse
Do you think I'll be able to use the MI TOOL V2, even in the fastboot loop.?
Thank you by the way
pedrohwelerson said:
Do you think I'll be able to use the MI TOOL V2, even in the fastboot loop.?
Thank you by the way
Click to expand...
Click to collapse
It should work, try to get the chinese rom back, unlock it again, flash twrp, give xiaomi.eu rom a try, they should work on any xiaomi phone regardless of region.
zipsu said:
It should work, try to get the chinese rom back, unlock it again, flash twrp, give xiaomi.eu rom a try, they should work on any xiaomi phone regardless of region.
Click to expand...
Click to collapse
I can't use MITOOL because the USB DEBUGGING isn't enabled, is there a way to do it in the fastboot loop?
Thank you
It should recongnize with no problems.. Just check if you have the ADB drivers and try unlocking the bootloader and then flashing the Rom with the miflash tool. Still, if you have access to fastboot, things should be fine! Don't panic hahha
nudou350 said:
It should recongnize with no problems.. Just check if you have the ADB drivers and try unlocking the bootloader and then flashing the Rom with the miflash tool. Still, if you have access to fastboot, things should be fine! Don't panic hahha
Click to expand...
Click to collapse
The MI tool v2 recognized my phone alright but it can't flash the rom coz I don't have the usd debugger enable and I can't turn on the bug to enable it since I Bricked the phone.
So I wondering if I can turn the usb debugger by other way.
Thank you
pedrohwelerson said:
Hi Guys, I hope someone of you could help me out.
Recently a Chinese friend of mine gave me an MI 9 as a present. But unfortunately they ROM of the new phone was the CN version.
I found a way to change the ROM by doing the unlock bootloader and flashing TRWP, after that, I downloaded the MI9_Global_V9.5.30_vendor_fw_flash, went back to the Recovery and wiped the "Delvik, cache, SYSTEM and Data. When I was trying to install the rom I got an error telling me the Global rom file was corrupt and restarted the cellphone.
The problem is I am stuck in the Fastboot loop, can't access the recovery and my computer don't recognize the cellphone.
I know I ****ed it up, I was wondering if I can revert that or did I just lost a phone.
Thank you Guys.
Click to expand...
Click to collapse
Read carefully and report
1. Try to hold down the buttons vol down and power, see if : fastboot devices sees it. If so XiaoMi Tool will restore it. If not do the same try recovery vol up + power. Do adb devices and see if anything shows up. Worst case you'll have to open the phone up and connect the EDL pins together and it will flash anything. I use minimal ADB and Fastboot phone plugged via USB cable into the computer and run those commands.
2. Fully bricks their device here is the unbrick factory method
https://c.mi.com/thread-1479882-1-0.html
that's connecting EDL pins with the phone case removed for a phone that doesn't boot at all
3. https://youtu.be/8mW0JzKow7E
here's the exact EDL test point required on Mi9
if you can't boot or recognize the device at all via fastboot or ADB. If this doesn't work nothing will...
But it will work, that's what the factory does. Obviously the last resort.
hochocnua said:
Read carefully and report
1. Try to hold down the buttons vol down and power, see if : fastboot devices sees it. If so XiaoMi Tool will restore it. If not do the same try recovery vol up + power. Do adb devices and see if anything shows up. Worst case you'll have to open the phone up and connect the EDL pins together and it will flash anything. I use minimal ADB and Fastboot phone plugged via USB cable into the computer and run those commands.
2. Fully bricks their device here is the unbrick factory method
https://c.mi.com/thread-1479882-1-0.html
that's connecting EDL pins with the phone case removed for a phone that doesn't boot at all
3. https://youtu.be/8mW0JzKow7E
here's the exact EDL test point required on Mi9
if you can't boot or recognize the device at all via fastboot or ADB. If this doesn't work nothing will...
But it will work, that's what the factory does. Obviously the last resort.
Click to expand...
Click to collapse
My pc identify my MI 9 alright the problem is that I can't flash anything with MItools coz I don't have enable the USB debugging and I can't enable it because of the fastboot loop.
Is there a way to enable it with a CMD command?
If no I'll have to open de device and do the EDL.
By the way thank you for your help.
REally appreciated it.
pedrohwelerson said:
My pc identify my MI 9 alright the problem is that I can't flash anything with MItools coz I don't have enable the USB debugging and I can't enable it because of the fastboot loop.
Is there a way to enable it with a CMD command?
If no I'll have to open de device and do the EDL.
By the way thank you for your help.
REally appreciated it.
Click to expand...
Click to collapse
like and share
pedrohwelerson said:
My pc identify my MI 9 alright the problem is that I can't flash anything with MItools coz I don't have enable the USB debugging and I can't enable it because of the fastboot loop.
Is there a way to enable it with a CMD command?
If no I'll have to open de device and do the EDL.
By the way thank you for your help.
REally appreciated it.
Click to expand...
Click to collapse
Op if you'd like help restoring your device to working order. I could help you through TeamViewer. If you'd like
andrew2401 said:
Op if you'd like help restoring your device to working order. I could help you through TeamViewer. If you'd like
Click to expand...
Click to collapse
I would really like it.
Thank you
pedrohwelerson said:
I would really like it.
Thank you
Click to expand...
Click to collapse
Where are you from? Asking so I can take time zone difference into account when arranging a time
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
thank you for reaching out to me, however, i tried the combo you suggested, but its stuck on the Black screen. but it does connect to the computer. i also tried the miflash tools, and im getting the red Bar.
Kenora_I said:
Is it recognized in the computer?
Are you able to use Mi Flash Tool?
Have you eliminated the possibility of screen malfunction?
Click to expand...
Click to collapse
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
LowaEastSide said:
yes all of the above friend.
it connects to com
and its a brand new devices, i just unlocked the bootloader and was in the process of flashing the Global EU when everything went wrong.
now its stuck in a black screen, "EDL". So Upset..!!
Click to expand...
Click to collapse
i also spent Hours trying to flash it back with the miflash tool and continue to get HELLO POCKET Error plus a few other things it keep saying. Basically getting red bar error. and the coms plus drivers are downloaded correctly. i also tried all my ports. SMH.
skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happened to have his info?
skyler13 said:
You'll have to pay someone to remote in to reflash the rom onto your phone if its stuck in EDL mode, i had the same issue when i flash and clean lock as well by accident and my phone got stuck in edl mode and this guy managed to fix my device (its costs 2500 Rub which was around £26 for me)
Click to expand...
Click to collapse
would you happend to have his info? and thanks for your reply and Help brother
LowaEastSide said:
would you happend to have his info? and thanks for your reply and Help brother
Click to expand...
Click to collapse
so you was stuck in a black screen as well?
LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
yeah let me grab his details (he's on telegram) and yeah i was stuck on a black screen too. he was able to remote onto my computer and fix the hello packet error or write error i was getting and was able to get the edl mode flash and my phone booted up afterwards
LowaEastSide said:
so you was stuck in a black screen as well?
Click to expand...
Click to collapse
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.
Yeah, I wouldn't endorse it but you can only get someone like that to fix it. Also, try paying half at the start and rest in the end cause ya don't wanna get scammed
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=V8xiNoWz-Yw Tried this ? This is for global but grab a chinese version and follow the install guide
skyler13 said:
His telegram is Authorized Xiaomi Account MOD EDIT: Link Removed just message him, he'll say yeah he'll fix it for 2500Rub over paypal and he'll get this fixed for you. he's a trusted guy, managed to fix my device within 20 minutes.
Click to expand...
Click to collapse
Listen, I would like to thank you for helping me out Brother. I was able to reach out to the person you recommend, however he took a few hours to respond back to be. By the time he did I already had some I found on YouTube do for me remotely as well. Only chargers me $40 US. Im pretty sure I would have been able to haggle him down but figured it was a fare price. He also was kind enough to flash the globle 12.5 ROM as well. On that note, would you know if I'll be able to receive OTA updates? Or will I have to install TWRP RECOVERY and flash the new updates when they come out.? Thanks again for your help brother.
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
Problem Fixes, thanks to
Ganga -->>> [email protected]> Thanks my Brother, very honest and Knowledgeable with the Xioami Mi 11. I was VERY happy that I did have to remove the back Glass and find the 2 copper prongs like other people were forced to do. Bless.
Pho3nX said:
If you can't access on your recovery... It's bricked. Are you sure to have flash the good ROM ? When you have this problem, it's due to a bad ROM flashed or corrupted Data / Download (Bad CRC/MD5) flashed under MiFlash on Fastboot Mode.
1/ Try combinaison : POWER + "-" or POWER + "+" with 5 seconds press
2/ Plug your Phone on your computer, launch Xiaomi Unlock (show device ? Locked/Unlocked Status ?)
3/ Plug your Phone on your computer, MiFlash (show device ? Locked/Unlocked Status ?)
4/ Plug your Phone on your computer, try "XiaoMiTool V2" for trying Unbrick
Click to expand...
Click to collapse
There's no such thing as "bricked" in 2021... even if you have to flash it via EDL, still not bricked.
LowaEastSide said:
hey. Im hoping i can get some help. i just purchased the Chinese Version of the Mi 11, i waited a week and just unlocked the bootloader so decided to flash the Global Rom. However, things went wrong and now im stuck with a black screen. I can NOT get into recovery, but i do hear the devices connecting when i plug it in. I was on the Chinese Version 12.5.9.0. I tried flashing the Global Version 12.0.22.0, the when it i got stuck on the black screen. I tried to do research on it but can not figure it out for the life of me. Please, Need Help.. Thanks in advance. Bless..!!
Click to expand...
Click to collapse
I had same situation on Redmi K20 Pro. You'll need to flash it using Mi Flash with a dev account via EDL.
And after flashing global rom, never neeever NEVER lock it back when not having chinese rom on a chinese phone.
You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharingi reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.
Pikaone41 said:
You are in edl mode, you can flash this rom :
Official Engineering Firmware for Mi 11 : https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharingi reupload this for you, tell me when you have downloaded it. Flash it with mi flash, let the phone boot, reboot in fastboot and flash the rom you want.
Click to expand...
Click to collapse
Thanks you for the EDL firmware. I will download it and just in case I'll ever need it in the future. Plus I'll keep you in mind if ever I need help in the future. Honestly, I never had such a hard time reflashing a device stuck in bootloop. I've flashed so many devices in my life time but never came across such a difficult device to repair. More thank likely I'll be sticking to OnePlus. Much easier.
after updating from miui 13 to miui 14 via OTA was a disaster. My phone stuck into the bootloop. Can use it anymore. Is there any solution to get rid of it?
asifneowaz2 said:
after updating from miui 13 to miui 14 via OTA was a disaster. My phone stuck into the bootloop. Can use it anymore. Is there any solution to get rid of it?
Click to expand...
Click to collapse
No way to know what parts are missing. You can reflash your current ROM or the original ROM via fastboot.
Can you enter fastboot mode?
asifneowaz2 said:
after updating from miui 13 to miui 14 via OTA was a disaster. My phone stuck into the bootloop. Can use it anymore. Is there any solution to get rid of it?
Click to expand...
Click to collapse
If your bootloader was unlocked you can recover the device via fastboot.
If not you have the same situation as described here:
Redmi Note 10 pro stuck on Mi logo loop after update
I tried wiping my data, but no success. I tried mi flash tool but no scucces. My bootloader is lock. I can boot into fastboot and recovery mode only. Safe mode also loop into logo only. can anyone tell how i can flash stable rom.
forum.xda-developers.com
Interesting to see that several people are reporting bootloop after upgrading to MIUI 14.
My advice to anyone is to unlock the bootloader before upgrading to MIUI 14 to avoid having a brick, which you can't recover by your own by just flashing.
minax007 said:
If your bootloader was unlocked you can recover the device via fastboot.
If not you have the same situation as described here:
Redmi Note 10 pro stuck on Mi logo loop after update
I tried wiping my data, but no success. I tried mi flash tool but no scucces. My bootloader is lock. I can boot into fastboot and recovery mode only. Safe mode also loop into logo only. can anyone tell how i can flash stable rom.
forum.xda-developers.com
Interesting to see that several people are reporting bootloop after upgrading to MIUI 14.
My advice to anyone is to unlock the bootloader before upgrading to MIUI 14 to avoid having a brick, which you can't recover by your own by just flashing.
Click to expand...
Click to collapse
Excellent advice about "waiting" to first unlock and actually unlocking it before doing any upgrades.
Sheist! said:
Excellent advice about "waiting" to first unlock and actually unlocking it before doing any upgrades.
Click to expand...
Click to collapse
Thank you.
But could you please explain what you mean with "waiting"?
I assume that you mean the seven days until Xiaomi grants you the possibility to unlock the bootloader, right?
minax007 said:
Thank you.
But could you please explain what you mean with "waiting"?
I assume that you mean the seven days until Xiaomi grants you the possibility to unlock the bootloader, right?
Click to expand...
Click to collapse
Don't upgrade software until you first unlock bootloader.
Sheist! said:
Don't upgrade software until you first unlock bootloader.
Click to expand...
Click to collapse
I agree with regards to this device.
But usually it is not a problem.
With regards to this device I see from two other people that they are facing a bootloop when updating to MIUI 14.
I also did the update and my device ended up in a bootloop.
But I had unlocked the bootloader in advance and could recover the device by flashing.
waw .... 1,000,000 phones sold, update ban ... 50 year old aunty needs to unlock bootloader soon to run update ....
The xda community will grow
Ashle said:
waw .... 1,000,000 phones sold, update ban ... 50 year old aunty needs to unlock bootloader soon to run update ....
The xda community will grow
Click to expand...
Click to collapse
You think that aunty will know about XDA either?
How can I unlock bootloader on my Redmi note 10 pro (global) please
asifneowaz2 said:
after updating from miui 13 to miui 14 via OTA was a disaster. My phone stuck into the bootloop. Can use it anymore. Is there any solution to get rid of it?
Click to expand...
Click to collapse
Could you explain the nature of ur bootloop please... Does it just stay in the MI logo with the three loading dots underneath or does it reach lock screen occassionally?
Dheerajvirgo said:
Could you explain the nature of ur bootloop please... Does it just stay in the MI logo with the three loading dots underneath or does it reach lock screen occassionally?
Click to expand...
Click to collapse
Hi
Greetings, I am facing the same problem, after upgrade to miui14 the phone is in bootloop,
Explanation
1) The phone starts and enters menu(reboot, wipe data, connect with MI assistant, safe mode)
2) If i click reboot, it will reboot and reach to welcome screen and then it will ask me to activate the phone
Thats it
Then it restarts automatically
This process repeats untill battery drain
The phone is not unlocked
Advice .........
Justfamous said:
How can I unlock bootloader on my Redmi note 10 pro (global) please
Click to expand...
Click to collapse
That is actually very easy. There is a tool. Mi_Unlock-en-5.5.224.24. you will need to- (a) go into fastboot mode(Switch on by pressing power+volume down) (b) Connect phone via USB Cable. Have the proper drivers installed. (c) Launch Mi Unlock tool and login into Mi Account. (d) refresh to search phone, select and press unlock. Takes a couple of seconds to unlock the bootloader.
Agent03 said:
Hi
Greetings, I am facing the same problem, after upgrade to miui14 the phone is in bootloop,
Explanation
1) The phone starts and enters menu(reboot, wipe data, connect with MI assistant, safe mode)
2) If i click reboot, it will reboot and reach to welcome screen and then it will ask me to activate the phone
Thats it
Then it restarts automatically
This process repeats untill battery drain
The phone is not unlocked
Advice .........
Click to expand...
Click to collapse
Unlock the bootloader by following the solution described above .
Download and install MiFlashtool 2017.4.25.0.
Download a stable fastboot ROM suitable for your device and place the unzipped folder in the same folder as MiFlashtool C:\xiaomi\XiaoMiFlash
Boot device into fastboot mode and connect.
Flash the ROM. Just it.
jinvary said:
That is actually very easy. There is a tool. Mi_Unlock-en-5.5.224.24. you will need to- (a) go into fastboot mode(Switch on by pressing power+volume down) (b) Connect phone via USB Cable. Have the proper drivers installed. (c) Launch Mi Unlock tool and login into Mi Account. (d) refresh to search phone, select and press unlock. Takes a couple of seconds to unlock the bootloader.
Click to expand...
Click to collapse
Hmmmm
A lot of people face difficulty unlocking MIUI bootloader.
To avoid frustration I suggest you do some Googling to find the full guide to unlocking.
Like this one ...https://new.c.mi.com/global/post/101245
Note the 168 hrs wait
Does unlocking the bootloader erase the device's data?.
andrescm said:
Does unlocking the bootloader erase the device's data?.
Click to expand...
Click to collapse
Yes