Hi guys,
I just ran into a weird issue with my S8. I dropped it, no visual damage (it's in a case with tempered glass on it) but now it doesn't see the sim card that was in the phone. However putting another sim card DOES work! Putting my old sim back in and removing the SD card ALSO works, but not my old sim with SD card together.......
What might be the issue here? SD card together with another sim works but not SD card with old sim. But old sim works if it's the only thing in the tray (no SD card).
This is really stupid. I went to my service provider, picket up another sim card with same number and yes my phone works again WITH SD card.......
What's the deal here??
Related
Well I bought Nexus 5. Because of that I had to get a Micro SIM card to fit in it.
I bought another Micro -to- Normal SIM adapter. Like an external Jacket so that I can use the same SIM in my SGS Advance.
Now, because of the SIM holder design, the terminals might have gotten a little worn out due to inserting and removing the SIM card.
But What I dont understand is, it was working fine until suddenly my SGS Advance stopped recognising my SIM card.
Ok.
So I tried other SIM cards. Still the same result. Mind you, the phone was recognising the SIM Card(s) before it was stopped recognising.
Cause for it :
1.physical damage
well I dont think so cause I dont see if there are any terminals missing or something out of place or anything that has fallen off.
2.Software issue.
Please help me. And yeah Phones outta warranty period running 2.3.6 & yeah thats about it. Please see image below. Top notification bar just right of the mid line, symbol that no SIM card is inserted.
Since yesterday my phone can't detect both my Sim card. It said no Sim inserted. All the while is working fine. Any solution on this? I'm not using sim adapter. I changed already 2 different Sim card and mostly i only got message new sim card inserted Restart to take effect. But after bit completed it still no Sim detected.
The SIM-slots of the Moto G are a very weak part of the phone, I had problems from the very first day to insert the cards correctly. After a short time the one slot doesn´t snap the card into place anymore,the whole construction is not build precise.
I had a few issues in not detecting the SIM card, after all I sticked a piece of thin plastic (or paper) on the top of the SIM´s to be certain that they stay tight at their places and if I´ve found the exact position everything works. So in my case it was a mechanical problem.
Normally I read all the instructions but no... not this time. I missed the warning on the back of the phone explaining that a manually cut nano card will hurt the tray. Now, when I insert a sd card (any sd card) either it does not find it either it says "damaged toshiba sd card, touch to fix". But format won't work, an error "unable to unmount" appears. Now I changed my nano sim card for a genuine one (I could not before, I was abroad), but it does not change anything. I though to write about my experience to warn others and also maybe someone knows if there is a way to fix it?
I manually cut my first card. It was a big old card so I had to cut half of the chip. Anyway, the phone was losing signal from time to time, but I replaced it with a new genuine one and it works perfectly. Try taking it for a fix if you have your warranty
Hey, you saved my phone. I just wanted to do the same you did. THANK YOU!
I have a galaxy s6 for tmobile. I have been using it fine for a while but the other day it gave me an error saying no sim card is inserted. I had a spare sim card and tried that one with no luck. I tried both sim cards in a different phone and worked with no problem. I have read about people dropping the phone and having sim card issues but thats not the case phone was not dropped. I noticed the sim card issue when i took it out my pocket to send a message and was not able to. the only thing i can think of is the sim card reader is shot some how?
I was wondering if there any other options for me to check before i go and get a new sim reader soldered in?
thanks in advance
Hello all,
Me and my bud have mi 9t pro that we bought from Malaysia and been using them in Turkey for a while. Today my friend tried to change his sim card's slot from slot 1 to slot 2 while sim was working perfrectly fine in slot 1. He inserted the pin code, however there was no cell. We have swapped our sim cards, put my sim card in his slot 2 and it worked fine, his sim card also worked pretty fine in my phone too.
All in all, his sim card is fine, sim card slot is working but his sim card doesnt work in slot 2. Does anybody have any ideas how to solve this issue?
Thx already