Android is an open source software stack for mobile devices and a corresponding open source project led by Google. This site and the Android Open Source Project (AOSP) repository offer the information and source code needed to create custom variants of the Android stack, port devices and accessories to the Android platform, and ensure devices meet the compatibility requirements that keep the Android ecosystem a healthy and stable environment for millions of users.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible devices:
P10 Lite.
P8 Lite 2017 (worked for me).
P9 Lite .
And all HI6250 that doesn't updated to Emui 8.
Installation Guide:
Flash elite TWRP.
Wipe: dalvik, cache, data and system.
Flash whole rom.
Flash GAPPS:
I recommend PICO ARM64.
Reboot to TWRP.
Flash GAPPS Pico ARM64.
Run factory reset to avoid conflics on boot.
Reboot rom, now you should able to use GAPPS.
Do not not use other gapps such as stock some users report that got black screen after installation and I don't understand where problem is, could be a GAPPS issue.
Works:
Audio.
Bluetooth.
Camera.
CodeOfHonor Application: can be found in Settings > System > Extra
Display.
Dual Sim.
External Storage.
Fingerprints.
GPS.
Graphics.
Internal Storage.
Lights.
NFC.
RIL.
Sensors.
Wifi.
Bugs:
Tell ME, Project Treble will not be ported since we have fully worked rom.
Formatting SDcard may not work with all hi6250.
Fix Error 7:
Open the flashable package.
open with an editor the updater-script can be found in /META-INF/com/google/android/
Remove the following lines
(!less_than_int(1539179585, getprop("ro.build.date.utc"))) || abort("E3003: Can't install this package (Wed Oct 10 15:53:05 CEST 2018) over newer build (" + getprop("ro.build.date") + ").");
getprop("ro.product.device") == "hi6250" || abort("E3004: This package is for "hi6250" devices; this is a "" + getprop("ro.product.device") + "".");
Save and update the zip.
Downloads:
10/10/2018
aosp-8.1.0-hi6250-10102018-haky86.zip.
Initial build.
Android 8.1.0 R48.
Security Patches: 5 October 2018
16/10/2018
aosp-8.1.0-hi6250-16102018-haky86-emui-5.x.zip.
Fix Bluetooth thanks to @hackintosh5 about port permissions.
Need a reboot to make working properly, don't forget it's based on Emui 5.x.
17/10/2018
aosp-8.1.0-hi6250-17102018-haky86-emui-5.x.zip.
fix sdcard.
Add hacks for CPU from HiKey for smoother build.
21/11/2018
aosp-8.1.0_r48-hi6250-21112018.zip
.
Gapps should be fixed.
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Credits:
Credits goes to Meticulus for the access to private sources, without them wasn't possible.
XDA:DevDB Information
AOSP Oreo for P9 Lite, ROM for the Huawei P9 Lite
Contributors
haky 86, Meticulus
Source Code: http://github.com/hak86
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 5.x Nougat
Based On: AOSP
Version Information
Status: Pre-Stable
Stable Release Date: 2018-10-11
Beta Release Date: 2018-10-11
Created 2018-10-11
Last Updated 2018-10-16
Is this for the 2016 or 2017 one?
hello source code please, good job :good:
iSonik said:
Is this for the 2016 or 2017 one?
Click to expand...
Click to collapse
it's work on all hi6250 devices that not received emui 8 also like p9 lite 2017 and honor 8 lite but you must be on emui 5.
KingOfMezi said:
hello source code please, good job :good:
Click to expand...
Click to collapse
nope, sources are private. will not be available due to request by original dev. thanks for understanding.
Getting Error 7 :/ Is this Real Oreo, or like some modded version of Nougat?
Btw i am on EMUI 5.0
iSonik said:
Getting Error 7 :/ Is this Real Oreo, or like some modded version of Nougat?
Btw i am on EMUI 5.0
Click to expand...
Click to collapse
I'm updating the op just hold on a moment to fix that error.
it's the real oreo based on nougat blobs..check the screenshots
edit: fix error 7 added.
iSonik said:
Getting Error 7 :/ Is this Real Oreo, or like some modded version of Nougat?
Btw i am on EMUI 5.0
Click to expand...
Click to collapse
unzip aosp-8.1.0-hi6250-10102018-haky86
and eliminate meta-info
Download this new meta-info and decompress. https://mega.nz/#!XIBXCApK!RdW4TapREViHJFfb6NDPV6ZA0VsvwmTBaCl3OZnUNB4
and add it to aosp-8.1.0-hi6250-10102018-haky86
compress in .zip put the desired name
Now you can flash in any recovery twrp
for fixing error 7 check the op, now is updated, in case of fixing bt I will port treble for emui 5 too since we have vendor.img by default.
haky 86 said:
for fixing error 7 check the op, now is updated, in case of fixing bt I will port treble for emui 5 too since we have vendor.img by default.
Click to expand...
Click to collapse
Great thx! Stupid question, but why is treble not supported yet since every oreo build should be supporting treble by default?
iSonik said:
Great thx! Stupid question, but why is treble not supported yet since every oreo build should be supporting treble by default?
Click to expand...
Click to collapse
because the p9 lite and some hi6250 devices doesn't receive Emui8 that contain treble support, so I've to do by myself. we need a vendor.img partition to enable treble. actually I've some GSI roms need to be updated
Im very happy to see this ^^ Did someone try?
juventus89 said:
Im very happy to see this ^^ Did someone try?
Click to expand...
Click to collapse
Tried, and it worked!
---------- Post added at 11:11 PM ---------- Previous post was at 11:08 PM ----------
haky 86 said:
because the p9 lite and some hi6250 devices doesn't receive Emui8 that contain treble support, so I've to do by myself. we need a vendor.img partition to enable treble. actually I've some GSI roms need to be updated
Click to expand...
Click to collapse
So that means we need a special Oreo Vendor for treble support?
iSonik said:
Tried, and it worked!
---------- Post added at 11:11 PM ---------- Previous post was at 11:08 PM ----------
So that means we need a special Oreo Vendor for treble support?
Click to expand...
Click to collapse
exactly.
haky 86 said:
for fixing error 7 check the op, now is updated, in case of fixing bt I will port treble for emui 5 too since we have vendor.img by default.
Click to expand...
Click to collapse
If porting the vendor.img is be possible that would be awesome!
https://forum.xda-developers.com/p1...-emui-8-0-0-huawei-p10-lite-dual-sim-t3780780
huawei p10 lite ft honor 7x and honor 6x EMUI 8.0.0 partition data,product.img and version.img
is compatible with Huawei P9 Lite 2016 android 7.0 :good:
tried
vendor.img and system.img emui 8.0 = brick
a good start :highfive:
in emui 8.0.0 vendor.img and kernel.img and system.img must have the same security patch to start Android 8.0.0.
example:
August patch - August patch -August patch =fine work
system.img vendor.img kernel.img
If you do not have the same security patch you would stay in brick bootlogo.
example:
** july patch - july patch - August patch = brick
* system.img vendor.img kernel.img
KingOfMezi said:
https://forum.xda-developers.com/p1...-emui-8-0-0-huawei-p10-lite-dual-sim-t3780780
huawei p10 lite ft honor 7x and honor 6x EMUI 8.0.0 partition data,product.img and version.img
is compatible with Huawei P9 Lite 2016 android 7.0 :good:
tried
vendor.img and system.img emui 8.0 = brick
a good start :highfive:
Click to expand...
Click to collapse
In this case, no more boot.img on emui 8 that has been divided in such as kernel.img, ramdisk.img and recovery_ramdisk.img for treble things.
in our case I'll use emui 5 as base since p9 lite 2016 don't have official oreo and that thing require a lot of hacks on the device tree and kernel, I've an idea to do that but after I update my Pie GSI roms for P8L17. if get treble ported successfully honestly Emui 5 is better than Emui 8 for roms. I made same aosp 8 treble version and get me bootloop on emui 8, while none-treble booted without problems. just my opinion
haky 86 said:
In this case, no more boot.img on emui 8 that has been divided in such as kernel.img, ramdisk.img and recovery_ramdisk.img for treble things.
in our case I'll use emui 5 as base since p9 lite 2016 don't have official oreo and that thing require a lot of hacks on the device tree and kernel, I've an idea to do that but after I update my Pie GSI roms for P8L17. if get treble ported successfully honestly Emui 5 is better than Emui 8 for roms. I made same aosp 8 treble version and get me bootloop on emui 8, while none-treble booted without problems. just my opinion
Click to expand...
Click to collapse
I changed the area honor 8 lite first, then I flashed the Android 7 to end flash emui 8
huawei p9 lite 2016 emui 8 android8?? ahh
yes
But the phone resets and did not have an antenna
via telegram
Huawei Development @reza_emt he made it work
Tnk You guys , For Your Hard work and reviving This Forum?.
Rip huawei
Thanks man,
i will try it .
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS
For Huawei P9 Lite
DONOT COPY MY WORK, Ask for Permissions or Gather it yourself,,,
This ROM is only for Firmwares based on EMUI 5.X only...
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm
* App failed. Please do some research if you have any concerns
* about features included in this ROM before flashing it,
* YOU are choosing to make these modifications, and if you
* point finger at me for messing up your device, i will laugh at you.
*
*/
Introduction:
What is LineageOS ?
Features of LineageOS:
Unique LineageOS Features
Installation Instructions:
* -- LineageOS only supports TWRP recovery. Use any other recovery at your own risk.
* -- LineageOS only supports EliteKernelReborn. I will not provide support for those using other kernels.
* -- Download the Latest LineageOS 14.1 from 2nd Post...
* -- Delete all your Fingerprints from Stock or Elite ROM.
* -- Ensure the latest version of TWRP Recovery is installed.
* -- Ensure that Stock/unmodified P9 Lite vendor is installed... (if you are on Elite ROM, any version, you are on stock vendor)
* -- Do Complete TWRP Backup...
* -- Wipe only Data, Dalvic, Cache, System... Dont touch other Partitions...
* -- Install LineageOS 14.1
* -- Install GApps (optional)
* -- Install SuperSU or Magisk (optional)
* -- Reboot with Pray
Click to expand...
Click to collapse
Bugs:
You tell me
READ FAQ in 4th Post to fix common things then post for new issues if you got one...
If You are having RIL Disconnecting issue, Please Flash your Original CUST Partition.... (Elite ROM has different Region CUST)
This took Countless hours to get ready... If you like it, Please Support by Donation
Special Thanks:
@Meticulus for creative & Endless work on Nougat & MM Codes.... Hats off bro...
@petya230 for his support
@felix-development for his support
@Abdullah7 for his support
@tw1st3d83 for his fixes to RIL
Source Codes:
LineageOS Source Codes
GPLv2: https://github.com/HassanMirza01/android
Contributors:
@HassanMirza01
ROM OS Version: LineageOS 14.1
ROM Kernel: EliteKernelReborn v6+ Upstreamed to 4.1.46
ROM Firmware Required: Bootloader Unlocked / TWRP / EMUI 5.X Firmware
Based On: LineageOS
Version Information:
Status: Stable
Created on: 2017-12-03
Last Updated on: 2018-01-27
Download Links:
LineageOS:
LineageOS-14.1-20180127-hi6250-UNOFFICIAL-HassanMirza01
LineageOS-14.1-20171228-hi6250-UNOFFICIAL-HassanMirza01
LineageOS-14.1-20171203-hi6250-UNOFFICIAL-HassanMirza01
All my ROMs are available on my Blog too,,, HassanMirza01.blogspot.com
Elite TWRP Project
Press Thanks and donate if you like it
CHANGELOG:
2018-01-27 LineageOS-14.1-hi6250-20180127-UNOFFICIAL:
*Updated Security Patch
*Added vulkan Support
*Bluetooth: possibly fix BLE (Bluetooth Low Energy)
*Fix bug which always made performance the effective power profile
*Add config for VOLTE on provision.(Not Tested)
*Fixed inputchannel crash/soft-reboot
*Added BLL Support
2017-12-28 LineageOS-14.1-hi6250-20171228-UNOFFICIAL:
*Ril Fixed...
*Updated to December Security Patch
*OTG automatic now...
*Kernel Upstreamed to 4.1.46
*P10 Lite Support Added
*More tweaks and improvements
2017-12-03 LineageOS-14.1-hi6250-20171203-UNOFFICIAL:
*initial release
FAQ:
1.) What to do if My Phone got bootloop or not booting ??
You have changed vendor, or modified vendor(not stock), OpenKirin vendor will never ever work,, so get Pure stock vendor of your device... it will work for sure... if still not, change you data filesystem...
2.) What to do if my SIMs are not working ??
Go to Extras, disable dual sim, reboot phone,, now read carefully,,
1. Install hex editor app from playstore
2. Make sure you have file explorer with root privileges
3. Open hex editor and find modem,id file on this location root/sys/firmware/devicetree/base/hisi,modem_id and open it.
4. Write down all numbers in first row
5. Then go to root/system/vendor and find phone.prop and open it with text editor.
6. Find your modem id by using search and type 0x3xxxxxx where X is your number from hex reader
7. Then make it look like this:
3.) What to do if my SafetyNet is not passed ??
Update Magisk to latest beta version, tick Magisk Hide and enable usb debugging...
reserve4
Yeah?[emoji123][emoji123]
Gesendet von meinem Honor 6X mit Tapatalk
Great job Homie!
Hope we can get oreo soon.
Johnny TDN said:
Great job Homie!
Hope we can get oreo soon.
Click to expand...
Click to collapse
Until Huawei release Oreo Kernel, we cant fix bugs,,, and let huawei release something for hi6250,,, then u can expect oreo....
Can i install camera huawei on LineageOS?
H2h133 said:
Can i install camera huawei on LineageOS?
Click to expand...
Click to collapse
NO.....:crying:
---------- Post added at 01:43 PM ---------- Previous post was at 01:31 PM ----------
H2h133 said:
Can i install camera huawei on LineageOS?
Click to expand...
Click to collapse
NO.....:crying:
---------- Post added at 01:44 PM ---------- Previous post was at 01:43 PM ----------
1 & half year ago I bought my GR5 Mini Device. After coming XDA didn’t found any custom rom for this device.
Got so much worried.
After few months Meticulus start making CM13. Tried from Alpha version. After flash 1st time, my heart broken, with no camera, screen buffering etc…
So going with non-editable stock EMUI….
After long time, Now I am proud for my device. We have so many custom roms (Flavours).
We can use as per our requirements.
Thanks from my heart to every one behind our Devices.
At last it I am able to use it as a daily driver! Thanks to Hassan and all the guys behind!!!
ksvt said:
At last it I am able to use it as a daily driver! Thanks to Hassan and all the guys behind!!!
Click to expand...
Click to collapse
All the best bro.... It took time but at last, it comes fine
Support by pressing thanks or donation if you like it
Have a good day...
Dirty Unicorns ROM v11.7.2 Released for hi6250 devices on my Web....
As DU devs dont want DU Roms on XDA so you can get it from my Blog...
Remain Dirty... Never Clean
f2fs or ext4?
Started from ELITE v4, no chance to install Dirty Unicorns ROM on VNS-L31. My try with latest TWRP run in error:
Code:
Updater process ended with signal: 11
ScanX said:
Started from ELITE v4, no chance to install Dirty Unicorns ROM on VNS-L31. My try with latest TWRP run in error:
Code:
Updater process ended with signal: 11
Click to expand...
Click to collapse
download again,,, i updated file last night,,,, always use my web for latest links,,, dont get them from groups or anyone else...
I have download from your web yesterday evening (2017.12.05 19:30 GMT +1). Maybe overlap upload/download, so file was corrupted (Size 327,5 MB).
In a few hours back home I will repeat downloading and try again.
Thanks for quick response!
Download repeated. Everything went well!
I don't understand what is going wrong. I'm on 100% stock B380. Flashing your TWRP, doing full backup, wiping dalvik, cache, data, system, then flashing the rom and gapps, reboot and stuck on Lineage loading screen.
Okay then, I restore my backup - Now camera doesnt work (keeps restarting) and I can't make/receive calls. Factory reset doesn't fix it, so I restore to MM with the rollback package and everything seems fine again. Then I update to nougat and flash everything over again..... Still stuck on Lineage loading screen, and restore once again messes up camera and calls Do you have any idea what's going wrong?
Mara-X said:
I don't understand what is going wrong. I'm on 100% stock B380. Flashing your TWRP, doing full backup, wiping dalvik, cache, data, system, then flashing the rom and gapps, reboot and stuck on Lineage loading screen.
Okay then, I restore my backup - Now camera doesnt work (keeps restarting) and I can't make/receive calls. Factory reset doesn't fix it, so I restore to MM with the rollback package and everything seems fine again. Then I update to nougat and flash everything over again..... Still stuck on Lineage loading screen, and restore once again messes up camera and calls Do you have any idea what's going wrong?
Click to expand...
Click to collapse
You need to flash elite kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XenonHD
For Huawei P9 Lite
DONOT COPY MY WORK, Ask for Permissions or Gather it yourself,,,
This ROM is only for Firmwares based on EMUI 5.X only...
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm
* App failed. Please do some research if you have any concerns
* about features included in this ROM before flashing it,
* YOU are choosing to make these modifications, and if you
* point finger at me for messing up your device, i will laugh at you.
*
*/
Introduction:
What is XenonHD ?
Installation Instructions:
* -- XenonHD only supports TWRP recovery. Use any other recovery at your own risk.
* -- XenonHD only supports EliteKernelReborn. I will not provide support for those using other kernels.
* -- Download the Latest XenonHD 7.1.2 from 2nd Post...
* -- Delete all your Fingerprints from Stock or Elite ROM.
* -- Ensure the latest version of TWRP Recovery is installed.
* -- Ensure that Stock/unmodified P9 Lite vendor is installed... (if you are on Elite ROM, any version, you are on stock vendor)
* -- Do Complete TWRP Backup...
* -- Wipe only Data, Dalvic, Cache, System... Dont touch other Partitions...
* -- Install XenonHD 7.1.2
* -- Install GApps (optional)
* -- Install SuperSU or Magisk (optional)
* -- Reboot with Pray
Click to expand...
Click to collapse
Youtube Review of XenonHD on P9 Lite
Bugs:
You tell me
READ FAQ in 4th Post to fix common things then post for new issues if you got one...
If You are having RIL Disconnecting issue, Please Flash your Original CUST Partition.... (Elite ROM has different Region CUST)
This took Countless hours to get ready... If you like it, Please Support by Donation
Special Thanks:
@Meticulus for creative & Endless work on Nougat & MM Codes.... Hats off bro...
@petya230 for his support
@felix-development for his support
@Abdullah7 for his support
@tw1st3d83 for his FIX to Ril Issues
Source Codes:
XenonHD Source Codes
GPLv2: https://github.com/HassanMirza01/android
Contributors:
@HassanMirza01
ROM OS Version: XenonHD 7.1.2
ROM Kernel: EliteKernelReborn v6+ Upstreamed to 4.1.46
ROM Firmware Required: Bootloader Unlocked / TWRP / EMUI 5.X Firmware
Based On: XenonHD
Version Information:
Status: Stable
Created on: 2018-01-08
Last Updated on: 2018-02-02
Download Links:
XenonHD:
XenonHD-7.1.2-20180202-hi6250-UNOFFICIAL-HassanMirza01
XenonHD-7.1.2-20180108-hi6250-UNOFFICIAL-HassanMirza01
All my ROMs are available on my Blog too,,, HassanMirza01.blogspot.com
Elite TWRP Project
Press Thanks and donate if you like it
CHANGELOG:
2018-02-02 XenonHD-7.1.2-hi6250-20180202-UNOFFICIAL:
*Updated Security Patch
*Added vulkan Support
*Bluetooth: possibly fix BLE (Bluetooth Low Energy)
*Fix bug which always made performance the effective power profile
*Add config for VOLTE on provision.(Not Tested)
*Fixed inputchannel crash/soft-reboot
*Added BLL Support
*Ril Fixed…
*Updated to December Security Patch
*OTG automatic now…
*Kernel Upstreamed to 4.1.46
*P10 Lite Support Added
*More tweaks and improvements
2018-01-08 XenonHD-7.1.2-hi6250-20180108-UNOFFICIAL:
*initial release
FAQ:
1.) What to do if My Phone got bootloop or not booting ??
You have changed vendor, or modified vendor(not stock), OpenKirin vendor will never ever work,, so get Pure stock vendor of your device... it will work for sure... if still not, change you data filesystem...
2.) What to do if my SIMs are not working ??
Go to Extras, disable dual sim, reboot phone,, now read carefully,,
1. Install hex editor app from playstore
2. Make sure you have file explorer with root privileges
3. Open hex editor and find modem,id file on this location root/sys/firmware/devicetree/base/hisi,modem_id and open it.
4. Write down all numbers in first row
5. Then go to root/system/vendor and find phone.prop and open it with text editor.
6. Find your modem id by using search and type 0x3xxxxxx where X is your number from hex reader
7. Then make it look like this:
3.) What to do if my SafetyNet is not passed ??
Update Magisk to latest beta version, tick Magisk Hide and enable usb debugging...
reserved4
Will you bring us a pure AOSP ROM?
Sent from my PRA-LA1 using Tapatalk
hamzio7 said:
Will you bring us a pure AOSP ROM?
Click to expand...
Click to collapse
There is pure AOSP out there: http://www.meticulus.co.vu/p/android-open.html
Hello,
i have a P10 Lite WAS-LX1.
I installed this ROM and the sound didn't work. I'm 100% sure that i am on stock vendor.
Then i installed P9 Lite Vendor and the sound worked but the sim didn't work. Your solution how to fix Sim didn't help.
I have the same problem with all your ROMs.
Hope you can fix this.
Zillinda said:
Hello,
i have a P10 Lite WAS-LX1.
I installed this ROM and the sound didn't work. I'm 100% sure that i am on stock vendor.
Then i installed P9 Lite Vendor and the sound worked but the sim didn't work. Your solution how to fix Sim didn't help.
I have the same problem with all your ROMs.
Hope you can fix this.
Click to expand...
Click to collapse
i think i didnot write P10 Lite supported,,, as i never tested it... no one test it....
This one is better that the Elite 7.2?
ryusaki31 said:
This one is better that the Elite 7.2?
Click to expand...
Click to collapse
This is only in the eye of the beholder. It you love EMUi than no, otherwuse yes.
Zillinda said:
Hello,
i have a P10 Lite WAS-LX1.
I installed this ROM and the sound didn't work. I'm 100% sure that i am on stock vendor.
Then i installed P9 Lite Vendor and the sound worked but the sim didn't work. Your solution how to fix Sim didn't help.
I have the same problem with all your ROMs.
Hope you can fix this.
Click to expand...
Click to collapse
My device is GR5 Mini. His all ROMs worked well in this device.
I faced sound problems only on his elite from. I flashed most of all versions of Elite ROM.
God knows what happened with this ROM....
All others are great, 1ST is LEGEND ROM for viper added.
Hi all,
I would like to know if I need to flash Elite Rom first or should I flash directly Xenon HD straight away?
The Gapps to be downloaded is ARM64 7.1 or ARM 7.1?
I'm actually on stock 7.0 VNS-L21C432B388.
Thanks in advance for your help.
amagnien said:
Hi all,
I would like to know if I need to flash Elite Rom first or should I flash directly Xenon HD straight away?
The Gapps to be downloaded is ARM64 7.1 or ARM 7.1?
I'm actually on stock 7.0 VNS-L21C432B388.
Thanks in advance for your help.
Click to expand...
Click to collapse
Flash it directly.. just follow instructions... Dont do anything to vendor... Arm64 needed
HassanMirza01 said:
Flash it directly.. just follow instructions... Dont do anything to vendor... Arm64 needed
Click to expand...
Click to collapse
Thanks for your help
XenonHD Updated:
CHANGELOG:
2018-02-02 XenonHD-7.1.2-hi6250-20180202-UNOFFICIAL:
*Updated Security Patch
*Added vulkan Support
*Bluetooth: possibly fix BLE (Bluetooth Low Energy)
*Fix bug which always made performance the effective power profile
*Add config for VOLTE on provision.(Not Tested)
*Fixed inputchannel crash/soft-reboot
*Added BLL Support
*Ril Fixed…
*Updated to December Security Patch
*OTG automatic now…
*Kernel Upstreamed to 4.1.46
*P10 Lite Support Added
*More tweaks and improvements
2018-01-08 XenonHD-7.1.2-hi6250-20180108-UNOFFICIAL:
*initial release
Does Magisk 15.3 work on this ROM?
uberstar100 said:
Does Magisk 15.3 work on this ROM?
Click to expand...
Click to collapse
I think yes.
uberstar100 said:
Does Magisk 15.3 work on this ROM?
Click to expand...
Click to collapse
Yes magisk 15.3 working fine....
Hi all,
Congratulation Hassan forum your work!
I have a problem on Vns l-31 (p9 lite) with this rom and your lineageOS rom. Whastapp audios are disturbed from a noise.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Team OpenKirin AOSP Project. Our goal is to provide
a overall stable AOSP experience across all Huawei/Honor phones
utilizing a Kirin SoC and EMUI 8.0 - either updated or shipped.
So far most of the bugs have been fixed and the ROMs are fully usable
as daily driver - and fully Kirin optimized.
This is the device support section for: Huawei Mate 9.
Any bugs found on this device(s) can be reported here, please include proper logs if you encounter any issues.
We support 3 ROMs in total as of now - LineageOS (Unofficial), ResurrectionRemix OS (Official from Beta 2+), OmniRom
You can find all needed guides/roms on our official website: https://openkirin.net
Requirements: basically full stock EMUI 8.0, with stock recovery/ramdisk
Support: Telegram - https://t.me/joinchat/EeDpi02ekfeJSBeaV4eqOw
XDA:DevDB Information
OpenKirin Treble ROMs, ROM for the Huawei Mate 9
Contributors
OldDroid, XePeleato, rcstar6696, surdu_petru
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: LineageOS, CarbonROM, ResurrectionRemix OS, OmniRom
Version Information
Status: Beta
Created 2018-08-13
Last Updated 2018-08-27
Thanks for this! I am running the CarbonROM Beta 2 from the partner builds (released July 17). I notice that there is now an official version that is also labeled as Beta 2, but was released five days later (July 22). Can I flash the official build without going back to full stock first? Also, the newer build is significantly smaller: 599MB versus 1.6 GB. Is that because the newer build doesn't include GAPPS?
Thanks again and sorry if I missed the answers to these questions.
As an aside, I'm really liking CarbonROM. Great battery life and very smooth.
tim.malone said:
Thanks for this! I am running the CarbonROM Beta 2 from the partner builds (released July 17). I notice that there is now an official version that is also labeled as Beta 2, but was released five days later (July 22). Can I flash the official build without going back to full stock first? Also, the newer build is significantly smaller: 599MB versus 1.6 GB. Is that because the newer build doesn't include GAPPS?
Thanks again and sorry if I missed the answers to these questions.
As an aside, I'm really liking CarbonROM. Great battery life and very smooth.
Click to expand...
Click to collapse
the newer builds are xz compressed, you have to decompress them first.
If its the same rom (e.g. carbon -> carbon) you don't have to do a factory reset.
Regards
Thanks! And now I realize that I can't read and misread OmniROM for CarbonROM. Oops.
OldDroid said:
the newer builds are xz compressed, you have to decompress them first.
If its the same rom (e.g. carbon -> carbon) you don't have to do a factory reset.
Regards
Click to expand...
Click to collapse
What's the difference between OpenKirin LOS and Phusson's LOS?
kkslider1 said:
What's the difference between OpenKirin LOS and Phusson's LOS?
Click to expand...
Click to collapse
Phh LOS is a generic build meant for any device with treble support. The OpenKirin build is specifically targeted to Kirin devices.
Most of the changes are for dealing with the ways Huawei did things differently than everyone else. Also built in is the Huawei camera app, so (most of) the native camera functionality is available.
irony_delerium said:
Phh LOS is a generic build meant for any device with treble support. The OpenKirin build is specifically targeted to Kirin devices.
Most of the changes are for dealing with the ways Huawei did things differently than everyone else. Also built in is the Huawei camera app, so (most of) the native camera functionality is available.
Click to expand...
Click to collapse
Thanks! I want to try OpenKirin LOS (OKLOS), but how will I be able to flash Magisk without TWRP? OpenKirin LOS says that it requires the stock EMUI recovery, so how can I flash Magisk?
---------- Post added at 12:08 PM ---------- Previous post was at 11:38 AM ----------
Okay, so I clean flashed OpenKirin LOS Beta 5 on my MHA-L29. Fingerprint gestures are disabled/greyed-out despite the Mate 9 having a rear fingerprint sensor. Fingerprint gestures worked perfectly on Phh LOS, so I'm not sure why OKLOS isn't working on that end.
---------- Post added at 12:13 PM ---------- Previous post was at 12:08 PM ----------
Another issue I found: On OKLOS, the Mate 9's secondary top speaker isn't working when playing media. To be fair, it didn't work on Phh LOS either, so I'm not sure if that's an issue you guys can fix.
kkslider1 said:
Thanks! I want to try OpenKirin LOS, but how will I be able to flash Magisk without TWRP? OpenKirin LOS says that it requires the stock EMUI recovery, so how can I flash Magisk?
Click to expand...
Click to collapse
Use 'fastboot' command.
-> extract stock boot image, patch it by magisk manager, flash patched boot image by fastboot.
Or you can install (patch boot image and replace it ) in magisk manager directly.
michael_hamada said:
Use 'fastboot' command.
-> extract stock boot image, patch it by magisk manager, flash patched boot image by fastboot.
Or you can install (patch boot image and replace it ) in magisk manager directly.
Click to expand...
Click to collapse
Thanks! Much appreciated!
After a few days of running on my Mate 9, OKLOS is running super smooth! Much smoother than Phh LOS. Hoping @OldDroid and the team can address a few of the bugs listed in my earlier post. Keep it up!
kkslider1 said:
Thanks! I want to try OpenKirin LOS (OKLOS), but how will I be able to flash Magisk without TWRP? OpenKirin LOS says that it requires the stock EMUI recovery, so how can I flash Magisk?
---------- Post added at 12:08 PM ---------- Previous post was at 11:38 AM ----------
Okay, so I clean flashed OpenKirin LOS Beta 5 on my MHA-L29. Fingerprint gestures are disabled/greyed-out despite the Mate 9 having a rear fingerprint sensor. Fingerprint gestures worked perfectly on Phh LOS, so I'm not sure why OKLOS isn't working on that end.
---------- Post added at 12:13 PM ---------- Previous post was at 12:08 PM ----------
Another issue I found: On OKLOS, the Mate 9's secondary top speaker isn't working when playing media. To be fair, it didn't work on Phh LOS either, so I'm not sure if that's an issue you guys can fix.
Click to expand...
Click to collapse
disable the navbar to turn on navigation gestures.
This will be adressed in the next los beta so you can toggle the nav gestures with navbar enabled.
EDIT: please have a look at our telegram group if you need any guidance regarding the installation of magisk without a custom recovery (e.g. twrp).
Regards
i have a question , is it possible that ota to pie from lineageOS beat5 wihtout back to emui8
fate forget said:
i have a question , is it possible that ota to pie from lineageOS beat5 wihtout back to emui8
Click to expand...
Click to collapse
Flash new ROM & stock ramdisk (if you rooted with Magisk). Factory reset with stock recovery.
irony_delerium said:
Flash new ROM & stock ramdisk (if you rooted with Magisk). Factory reset with stock recovery.
Click to expand...
Click to collapse
thanks,I'm sorry for bothering you that,do you know how long will openkirin ROMs(for mate9) update everytime?
fate forget said:
thanks,I'm sorry for bothering you that,do you know how long will openkirin ROMs(for mate9) update everytime?
Click to expand...
Click to collapse
@OldDroid @irony_delerium This is something I'm also curious about. What is the average time between the 5 Betas for OKLOS? The changelog only shows the release date of the latest beta, not the previous versions.
kkslider1 said:
@[email protected]_delerium This is something I'm also curious about. What is the average time between the 5 Betas for OKLOS? The changelog only shows the release date of the latest beta, not the previous versions.
Click to expand...
Click to collapse
monthly security patches are guaranteed.
Regards
hello,
is there any way how the bugs should be reported?
In LOS Beta 5 I discovered that if trying to enable Bluetooth trigger in a Profile, the Settings crash. My phone is Mate 9.
PS Otherwise, the only thing I can say is Hats off to the developers! When I received the phone as a replacement (for a broken Nexus 6p) I thought "oh, crap: no Snapdragon, no LOS". This really made my day!
vedko said:
hello,
is there any way how the bugs should be reported?
In LOS Beta 5 I discovered that if trying to enable Bluetooth trigger in a Profile, the Settings crash. My phone is Mate 9.
PS Otherwise, the only thing I can say is Hats off to the developers! When I received the phone as a replacement (for a broken Nexus 6p) I thought "oh, crap: no Snapdragon, no LOS". This really made my day!
Click to expand...
Click to collapse
i'm aware of this issue. It will be adressed in the next update.
Regards
OldDroid said:
i'm aware of this issue. It will be adressed in the next update.
Regards
Click to expand...
Click to collapse
Thanks.
Although I meant it mainly as a general questions where the bugs should be brought up. In this thread? Or in the Telegram channel referenced in the 1st post? Or...?
PS I found out that NFC is not working, but that seems to be a known issue.
errors in logcat (omnirom)
Hello,
I am trying out OmniROM and I have been getting less than stellar battery life (though still acceptable). I took a look at the MatLog app and noticed a bunch of errors that keep coming up. One of them is from BatteryExternalStatsWorker: "no controller energy info supplied for wifi".
I googled around a bit and it appears this has popped up on other ROMs and it seems to be related to a missing API. There are other errors as well, many of them thrown by HWComposer: "invalid layer type change".
I have no idea if these are impacting battery life, but an error is an error.
I attached a zip with logs from MatLog.
Thanks.
Dear MR.OldDroid
Is it possible for you to add UMS (USB mass storage function, connect pc and turn Micro SD card in photo to be a removable flash disk on PC) into the Kernel? I like this function, it is much better than MTP function.
Thank you very much.
Open Beta Ports for
OnePlus 6T!
••OnePlus 7 - Open Beta 14••
••OnePlus 7T - Open Beta 2••
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Another ROM created by "Jay's Dev Team"! With this Dev Team we will be able to provide ports for devices like 6T or 7 Pro, with the help of maintainers that will test everything and keep everything up to date! This way ports will be more stable, support won't be randomly abandoned anymore and I will be able to focus on more ports and once OP6 gets proper full port, 6T will get it afterwards too!
This thread will be mostly updated by MounirHero (Matrix).
Features:
Stock OnePlus 7 OxygenOS Open Beta 14 /Android 10 Firmware
Debloated
Automated Flasher
Performance tweaks
Improved system stability
Prebuilt Latest twrp 3.3.1-32 by Mauronofrio
Horizon lights
Prebuilt Magisk core
What works:
Almost everything, check bugs!
What doesn't work / Bugs:
•Stock Dolby
Use MagiskHide 7 Pro (10) module to get certified (Netflix)
CHANGELOG:
•Fixed Notch hiding issues
•New Clock Styles for ambient display
•Security Patch Level: 2020-05
•OxygenOS Version: OnePlus7 - Open Beta 14
•All op7 ob14 update features
•Updated overlays
•Updated to latest Open Beta
•OnePlus 8 pro Live Wallpapers (Addon folder)
•Prebuilt latest twrp
•Prebuilt Magisk core (install apk only)
(Old Changelog)
•OxygenOS Version: OnePlus7 - Open Beta 13 - Android 10
•Updated to Open Beta 13
•Security Patch Level: 2020-04
•All changes that came with Open Beta 13
•Updated Android security patch to 2020.04
•Improved system stability and fixed general bugs
•Fixed the crash issue while opening the stock camera App
•Fixed the black screen issue
•Smoother animations
•chromatic reading mode works!
•Prebuilt latest twrp 3.3.1-32 by mauronofrio
How to Install:
NOTE: Backup Your nudes before flashing the ROM this process will completely wipe your storage!
• Flash OOS 10/H2OS 10 (any stock Q)
• Reboot to fastboot and Unlock bootloader.
• Boot Device (don't skip this step).
• Reboot to fastboot.
• Connect phone to PC (Windows / Linux) •
On Windows PC:
• Unpack PORTED_ROM .zip
• If it's your first time flashing → Double Click "Clean Flasher.bat" (it could take 5-10 minutes to flash)
• Phone will boot automatically in Ported Firmware.
• Enjoy!
On Linux PC:
• Unpack PORTED_ROM .zip to a folder of your choice.
• Open Terminal, type "cd /home/..../your rom folder".
• If it's your first time flashing → type "sudo sh clean_flasher_linux.sh" (it could take 5-10 minutes to flash).
• Phone will boot automatically in Ported Firmware.
• Enjoy!
------------------------------------------------
[/LEFT]
-Flashing could take 5-10 minutes (Based on your PC/Laptop)
-install magisk for root.
-Additional system apps in the ADDON Folder (Install as normal apk)
Mega Folder
(ob13 and ob14 from mega folder requires 'EPR' so make sure to follow epr guide before flashing the rom)
Google Drive Mirror
OnePlus 7T OB2 BUILD(sep. 2019)
•mirror1
• mirror2
Warning! DO NOT flash OP7-7t OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join our group!
Jay's Dev Team:
Jay - Main Developer - Donate to Jay
MounirHero - OnePlus 6T Maintainer & Tester - Donate to Mounir
Credits:
MounirHero for maintaining and testing
ProtoDeVNan0 for base OP6 Port
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
Mauronofrio for twrp.
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[ROM][PORT][10.0.0] OnePlus7 OB 14 [21.05.2020], ROM for the OnePlus 6T
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS OPEN BETA Q
Based On: OxygenOS
Version Information
Status: Stable
Created 2019-09-22
Last Updated 2020-05-24
it took a lot of effort,
it was my first port on oneplus 6T,
I hope to be able to bring other OEMs roms in the future.
Thank you @ ProtoDevNan0 for following me step by step,
and for giving me so much help. :highfive:
Some screenshots!:cyclops:
Hello Sir ProtoDevNano, been waiting for this, thank you.
7T HYBRID PORT screenshots
This looks promising. Would have flashed right away if Bluetooth was working.
WBT FP?
awesome its available now in 6t. ...
lately i only saw this in oneplus 6 furom
THANKS OP FOR BRINGING IT TO US
Thanks Dev for supporting 1+6t, And here are more testers available for 6t, pls support miui 11 rom tooooooo
Kind sir,
I'm on lineage os 17 android 10. Can you please let me know how to go to DP3 so that I can install this.
Thank you!
kumar akarsh said:
This looks promising. Would have flashed right away if Bluetooth was working.
Click to expand...
Click to collapse
Same here.
First impression is very good. - For me everything works out of the box, except the Video-Camera. Also, the preinstalled TWRP version did not cut it for me. The Storage Structure is the internal OS Structure. So it was impossible for me to install Magsik directly. After sideloading the newest Twrp Zip via Fastboot everything was back to normal. Magisk works fine.
AUSTIN said:
WBT FP?
Click to expand...
Click to collapse
Working exactly like on DP3 in this build
---------- Post added at 11:36 ---------- Previous post was at 11:34 ----------
ceo.mtcl said:
Kind sir,
I'm on lineage os 17 android 10. Can you please let me know how to go to DP3 so that I can install this.
Thank you!
Click to expand...
Click to collapse
http://telegram.me/JaysRoms
Check out our Telegram group for specified guides.
---------- Post added at 11:50 ---------- Previous post was at 11:36 ----------
Phoenix4Life said:
First impression is very good. - For me everything works out of the box, except the Video-Camera. Also, the preinstalled TWRP version did not cut it for me. The Storage Structure is the internal OS Structure. So it was impossible for me to install Magsik directly. After sideloading the newest Twrp Zip via Fastboot everything was back to normal. Magisk works fine.
Click to expand...
Click to collapse
Will be fixed on future build thanks for reporting:fingers-crossed:
Should this work with the T-Mobile version of the phone?
riazsudeen said:
Thanks Dev for supporting 1+6t, And here are more testers available for 6t, pls support miui 11 rom tooooooo
Click to expand...
Click to collapse
As soon as MIUI 11 will be out officially. I'll send my patches to Mounir and soon after that build will be released Pixel 3XL/4XL etc will be ported too.
I have a problem
I am in DB3 flashed the command "fastboot flash boot test-twrp-3.3.0-Q-fajita.img" TWRP and dsn loud instructions in TWRP booted.
Now the problem has only folders with numbers and letters in twrp, can not over twrp from phone copy.
What did I do wrong
Zimty86 said:
I have a problem
I am in DB3 flashed the command "fastboot flash boot test-twrp-3.3.0-Q-fajita.img" TWRP and dsn loud instructions in TWRP booted.
Now the problem has only folders with numbers and letters in twrp, can not over twrp from phone copy.
What did I do wrong
Click to expand...
Click to collapse
Nothing wrong it's an encryption issue with the recovery, I suggest you to sideload latest Mauronofrio twrp installer so everything Will be fine
MounirHero said:
Nothing wrong it's an encryption issue with the recovery, I suggest you to sideload latest Mauronofrio twrp installer so everything Will be fine
Click to expand...
Click to collapse
are the newer twrp synonymous for android q?
Does it require to resize the partition?
Zimty86 said:
are the newer twrp synonymous for android q?
Click to expand...
Click to collapse
You can't flash twrp with fastboot method since Q Is your OS, @ProtoDeVNan0 prebuilt Bluespark in the build, but It can't decrypt, Mauronofrio twrp 3.3.1.8 Is working flawselly, so I suggest you to sideload It if you want to root and flash stuff by your own.
---------- Post added at 16:12 ---------- Previous post was at 16:11 ----------
rob_z11 said:
Does it require to resize the partition?
Click to expand...
Click to collapse
No EPR tool is not necessary.
kumar akarsh said:
This looks promising. Would have flashed right away if Bluetooth was working.
Click to expand...
Click to collapse
Same here, I need BT to unlock my front door!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Samsung Galaxy S9/S9+
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction:
This is the Official Lineage OS 17.1 thread for the Samsung Galaxy S9 and S9+, codename starlte, star2lte.
Join our Lineage Exynos 9810 Development Telegram Group!
How to Install:
Please follow the instructions on our Official LineageOS Wiki page here.
MAKE SURE YOU ARE INSTALLING LINEAGE OVER FULLY STOCK ANDROID 10 FIRMWARE
If you don't follow these instructions, please don't expect support here. We also don't support 3rd party addons (Magisk/XPosed/Dolby/Viper/etc.), so please don't seek support if you use these.
What's not working:
Applicable exceptions granted in device support requirements.
Obviously Samsung's own features such as Samsung Pay, KNOX, Theme Center, Game Launcher, etc. won't be ported to LineageOS. We may have our own implementation to similar functions, though.
Iris sensor does not work because AOSP upstream does not support that yet.
IMS services (VoLTE, VoWiFi, etc). Samsung has their own proprietary implementation. It is not really possible to easily port that to LineageOS.
Notes:
Official Lineage OS builds will not pass CTS/SafetyNet -- due to the AVB flag's "red" status.
Official Lineage OS builds requires official stock unmodded android 10 firmware installed.
Official Lineage OS builds uses stock android 10 vendor so encryption is enabled by default.
Download:
LineageOS Updater Galaxy S9
LineageOS Updater Galaxy S9+
XDA:DevDB Information
Lineage OS for S9, ROM for the Samsung Galaxy S9
Contributors
erfanoabdi
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Official Android 10 firmware
Based On: LineageOS
Version Information
Status: Nightly
Created 2020-04-16
Last Updated 2020-04-17
Reserved
Reserved
Hi,
Thanks for maintaining the oficial LOS17.1!
One remark, under downloads, the second link is for S9+.
regards
dreas
dreas74 said:
Hi,
Thanks for maintaining the oficial LOS17.1!
One remark, under downloads, the second link is for S9+.
regards
dreas
Click to expand...
Click to collapse
Thanks, S9+ build will be available in a few hours
Love You Brother....
Bought Star2lte For 250$ And Very Satisfied Buy The Development On This Device Keep Doing The Good Work ..
Finally after a long time, an official build of LOS is here once again. Thanks dev, will immediately test when for S9+ are out.
Sent from my SM-G965F using Tapatalk
thank you so much
Thanks a lot, the official build is working great! [emoji106][emoji41]
Verstuurd vanaf mijn SM-G960F met Tapatalk
Thank you very much!
Great work!
:good:
Can I use TWRP instead of LinegeOS recovery to install official LOS 17.1? And modified Rob's vendor DTC5 to avoid force-encryption?
erfanoabdi said:
Samsung Galaxy S9/S9+
...
Created 2020-04-16
Last Updated 2020-04-16
Click to expand...
Click to collapse
Thank you for your work. A few question:
First: Is it still necessaryto wait with the install for 7 days after activation like it was in the past with lineageos 15.1?
Second: How is battery life?
thrid: what about the camera functioning? and is there a gCam alternative in case of problems?
vomad said:
Can I use TWRP instead of LinegeOS recovery to install official LOS 17.1? And modified Rob's vendor DTC5 to avoid force-encryption?
Click to expand...
Click to collapse
Both are not recommended by official LOS, but yes you can. I dirty flashed an official nightly on top of Rob's 13-4 build and his modified DTC5 vendor and everything (still) works as before.
Thank you very much for this rom! Great to see it has reached an official status.
I have a question about the forced encryption:
From what I understand TWRP is not (yet) able to decrypt the data partition, making it impossible to back-up and restore the data partition. Is this correct? And if so, does the lineage recovery support backup of encrypted data?
Where do I can stock vendor other than flashing stock ROM with Odin?
Sent from my SM-G965F using Tapatalk
Thanks for the new ROM, really looking forward to getting the official 17.1 on my S9, replacing the current 15.1 official LOS.
Instructions and pre-requisites need more detail though. What specifically is meant by "stock Android 10 firmware"? Bootloader, vendor, anything else? And where can we find reliable sources for stock firmware for specific phone models e.g. SM-G960F? Any chance of creating an archive of these linked to from the first post, so people have reliable sources for these mandatory requirements?
Thanks again.
yhvo2gt9 said:
Thanks for the new ROM, really looking forward to getting the official 17.1 on my S9, replacing the current 15.1 official LOS.
Instructions and pre-requisites need more detail though. What specifically is meant by "stock Android 10 firmware"? Bootloader, vendor, anything else? And where can we find reliable sources for stock firmware for specific phone models e.g. SM-G960F? Any chance of creating an archive of these linked to from the first post, so people have reliable sources for these mandatory requirements?
Thanks again.
Click to expand...
Click to collapse
Do you plan making a fresh install or over the 15.1?
Check the thread of unofficial lineage, there are the links to the vendor and bootloader images
I have successfully upgraded from 20200416 to the latest 20200417 build.[emoji41][emoji106]
However, I had to flash the update manually, by downloading the file and rebooting into recovery. Doing this from the OTA updater didn't work: after the update file had been downloaded and pressing the install button I got an installation error message after 1 second (before the phone would reboot to recovery).
I'm using TWRP 3.2.3. Is OTA supposed to work with it, or does the OTA updater only likes the Lineage Recovery? [emoji848]
Verstuurd vanaf mijn SM-G960F met Tapatalk
rbeuker said:
I have successfully upgraded from 20200416 to the latest 20200417 build.[emoji41][emoji106]
However, I had to flash the update manually, by downloading the file and rebooting into recovery. Doing this from the OTA updater didn't work: after the update file had been downloaded and pressing the install button I got an installation error message after 1 second (before the phone would reboot to recovery).
I'm using TWRP 3.2.3. Is OTA supposed to work with it, or does the OTA updater only likes the Lineage Recovery? [emoji848]
Verstuurd vanaf mijn SM-G960F met Tapatalk
Click to expand...
Click to collapse
I'm in the exact situation, had to manually install OTA update from /data/lineageos_updates (had to search on Google where the LineageOS updates are stored).
Thanks for the official build!